VL18-4N3140V SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
A B C D E F H I J K L M N O P Q R S T VL18-4N3140V | V18V PHOTOELECTRIC SENSORS Illustration may differ
Ordering information
Type Part no. VL18-4N3140V 6035496 Other models and accessories www.sick.com/V18V Detailed technical data
Features
Sensor/ detection principle Photoelectric retro-reflective sensor, Dual lens Housing design (light emission) Cylindrical, straight Housing length 83 mm Thread diameter (housing) M18 x 1 Optical axis Axial Type of light Visible red light Light source LED 2) Light spot size (distance) Ø 200 mm (4.5 m) Angle of dispersion 2.5° Wave length 660 nm Adjustment None 1) Reflector PL80A. 2) Average service life: 100,000 h at TU = +25 °C. Communication interface Communication interface -
2 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-11-09 17:58:45
Subject to change without notice
VL18-4N3140V | V18V PHOTOELECTRIC SENSORS Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 10 % 2) Power consumption ≤ 35 mA 3) Output type NPN Switching mode Light/dark switching Switching mode selector Selectable via L/D control cable Signal voltage NPN HIGH/LOW Approx. VS / < 2.0 V Output current Imax. ≤ 100 mA Response time ≤ 1 ms 4) Switching frequency ± 500 Hz 5) Connection type Male connector M12, 4-pin 6) Circuit protection A 7) B 8) C 9) D 10) Protection class III Weight 120 g Polarisation filter ✔ Housing material Stainless steel, Stainless steel V4A (1.4404, 316L) Optics material Plastic, Plan, PPS (Grilamid) Enclosure rating IP67, IP68, IP69K 11) Ambient operating temperature –25 °C ... +80 °C Ambient storage temperature –40 °C ... +80 °C 1) Limit values. 2) May not exceed or fall below Uv tolerances. 3) Without load, at VS 30 V DC. 4) Signal transit time with resistive load. 5) With light/dark ratio 1:1. 6) With gold plated contact pins, PPS with FDA certificate. 7) A = VS connections reverse-polarity protected. 8) B = interference suppression. 9) D = outputs overcurrent and short-circuit protected. 10) D = inputs and output reverse-polarity protected. 11) With correct mounted IP69K connector. Classifications ECl@ss 5.0 27270902 ECl@ss 5.1.4 27270902 ECl@ss 6.0 27270902 ECl@ss 6.2 27270902 ECl@ss 7.0 27270902 ECl@ss 8.0 27270902 ECl@ss 8.1 27270902 2017-11-09 17:58:45 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T VL18-4N3140V | V18V PHOTOELECTRIC SENSORS ECl@ss 9.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 UNSPSC 16.0901 39121528 Connection diagram Cd-087 + (L+) L/D - (M) WH BU BN BK Characteristic curve VL18V m (feet) (3.28) (6.56) (9.84) (16.40) (13.12) 100
2 Sensing range
Sensing range max. /c49 /c50 /c51 Distance in m (feet) ① Reflector PL80A ② Reflector C110A ⑤ Reflector P250 CHEM
4 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-11-09 17:58:45
Subject to change without notice
VL18-4N3140V | V18V PHOTOELECTRIC SENSORS Sensing range diagram VL18V 0 1 (3.28) (6.56) (9.84) (13.12) (16.40) 0.035 4.5 5 0.035 0.1 /c51 /c50 /c49 Distance in m (feet) Sensing range 2.4 2 4 4.5 Sensing range max. ① Reflector PL80A ② Reflector C110A ③ Reflective tape Diamond Grade Dimensional drawing (Dimensions in mm (inch)) VL18V, VSE18V M12x1 50 (1.97) 56 (2.2) 2.2 (.09) (.55) (.75) 83 (3.27) M18x1 /c54 /c49 /c52/c50 /c513.3 (.13) 3.3 (.13) ① M12 male device connector, 4-pin ② Yellow LED indicator:- lights continuously:Reception signal> reserve factor 2- blinks: Reception signal< reserve factor 2 but > switching thresh- old 1 ③ Fastening nuts (2 x); width across 24, stainless steel Recommended accessories Other models and accessories www.sick.com/V18V Brief description Type Part no. Universal bar clamp systems Plate N06N for universal clamp bracket, M18, Stainless steel 1.4571 (sheet), Stainless steel 1.4408 (clamp), Universal clamp (5322627), mounting hardware BEF-KHS-N06N 2051622 Mounting brackets and plates Mounting plate for M18 sensors, Stainless steel, without mounting hardware BEF-WG-M18N 5320948 2017-11-09 17:58:45 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T VL18-4N3140V | V18V PHOTOELECTRIC SENSORS Brief description Type Part no. Mounting bracket for M18 sensors, Stainless steel, without mounting hardware BEF-WN-M18N 5320947 Terminal and alignment brackets Mounting bracket with ball-and-socket, Plastic, mounting hardware included BEF-WN-M18-ST02 5312973 Clamping block for round sensors M18, without fixed stop, plastic (PA12), glass-fiber re- inforced, mounting hardware included BEF-KH-M18 2051481 Clamping block for round sensors M18, with fixed stop, plastic (PA12), glass-fiber rein- forced, mounting hardware included BEF-KHF-M18 2051482 Mounting ring, Stainless steel, without mounting hardware BEF-WN-MH15-2V 4053358 Reflectors Rectangular, screw connection, 80 mm x 80 mm, PMMA/ABS, Screw-on, 2 hole mount- ing PL80A 1003865 Self-adhesive REF-IRF-56 5314244 Chemically resistant, screw connection, 47 mm x 47 mm, Plastic, Screw-on, 2 hole mounting P250 CHEM 5321097 Fine triple reflector, chemically resistant, screw connection, 18 mm x 18 mm, Plastic, Screw-on, 2 hole mounting PL10F CHEM 5321636 Chemically resistant, screw connection, suitable for laser sensors, 16 mm x 38 mm, Plastic, Screw-on, 2 hole mounting PL20F-CHEM 5326089 Anti-fog to prevent moisture condensation on the reflective surface, screw connection, 56 mm x 37 mm, PMMA/ABS, Screw-on, 2 hole mounting PL40A Antifog 5322011 Rectangular, M3 screw connection, countersunk screw head, chemically resistant, 56 mm x 37 mm, Plastic, Screw-on, 2 hole mounting PL40B-CHEM 5326088 Stainless steel reflector, hygienic design, chemically resistant, enclosure rating IP69K, D12 adapter shaft, 25 mm x 25 mm, Stainless steel V4A (1.4404, 316L), D12-adapter shaft PLH25-D12 2063404 Stainless steel reflector, hygienic design, chemically resistant, Enclosure rating IP 69K, M12-adapter thread, 25 mm x 25 mm, Stainless steel V4A (1.4404, 316L), M12- adapter thread PLH25-M12 2063403 Stainless steel reflector, washdown design, chemically resistant, IP 69K enclosure rat- ing, screw connection, 14 mm x 14 mm, Stainless steel V4A (1.4404, 316L), Screw-on, 2 hole mounting PLV14-A 2063405
6 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-11-09 17:58:45
Subject to change without notice
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com