WLL170T-2P192 SICK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

FIBER-OPTIC SENSORS AND FIBERS

A B C D E F H I J K L M N O P Q R S T WLL170T-2P192 | WLL170-2 FIBER-OPTIC SENSORS AND FIBERS Illustration may differ

Ordering information

Type Part no. WLL170T-2P192 6033954 Other models and accessories www.sick.com/WLL170-2 Detailed technical data

Features

Sensor/detection principle Fiber-optic photoelectric sensor Dimensions (W x H x D) 10.5 mm x 35.5 mm x 83.7 mm Housing design (light emission) Rectangular Sensing range max. 0 mm ... 1,600 mm, Through-beam system 1) Sensing range 0 mm ... 35 mm, Proximity system 2) 3) 0 ... 270 mm, Through-beam system 4) Focus 5) Type of light Visible green light Light source LED 6) Angle of dispersion Approx. 65° 5) Wave length 525 nm Adjustment Single teach-in button Cable Time type Off delay Delay time Selectable by sliding switch, 40 ms Indication LED 1) LL3-TB02 and tip adapter LL3-TA01. 2) Objects to be sensed with 90% reflectivity (based on DIN 5033 white standard). Sensing range depends on fiber-optic cable. 3) LL3-DM01. 4) LL3-TB01. 5) See LL3 fiber-optic data. 6) Average service life: 100,000 h at TU = +25 °C.

2 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-08-07 15:48:08

Subject to change without notice

WLL170T-2P192 | WLL170-2 FIBER-OPTIC SENSORS AND FIBERS Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple 10 % 2) Power consumption ≤ 30 mA 3) Output type PNP Number of switching outputs 1 Switching mode Light/dark switching Switching mode selector Selectable via light/dark selector Output current Imax. ≤ 100 mA Response time ≤ 250 µs 4) Switching frequency 2,000 Hz 5) Input Teach-in input Connection type Cable, 4-wire, 2 m 6) Cable material PVC Conductor cross-section 0.2 mm² Circuit protection A 7) B 8) C 9) D 10) Protection class III Weight 60 g Housing material Plastic, ABS Enclosure rating IP66 11) Items supplied BEF-WLL170 mounting bracket Ambient operating temperature –25 °C ... +55 °C Ambient storage temperature –40 °C ... +70 °C UL File No. NRKH.E300503 & NRKH7.E300503 1) Limit values. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) Signal transit time with resistive load. 5) With light/dark ratio 1:1. 6) Do not bend below 0 °C. 7) A = VS connections reverse-polarity protected. 8) B = inputs and output reverse-polarity protected. 9) C = interference suppression. 10) D = outputs overcurrent and short-circuit protected. 11) With correctly attached fibre-optic cable LL3 and closed protection hood. Classifications ECl@ss 5.0 27270905 ECl@ss 5.1.4 27270905 ECl@ss 6.0 27270905 ECl@ss 6.2 27270905 ECl@ss 7.0 27270905 2017-08-07 15:48:08 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 3

A B C D E F H I J K L M N O P Q R S T WLL170T-2P192 | WLL170-2 FIBER-OPTIC SENSORS AND FIBERS ECl@ss 8.0 27270905 ECl@ss 8.1 27270905 ECl@ss 9.0 27270905 ETIM 5.0 EC002651 ETIM 6.0 EC002651 UNSPSC 16.0901 39121528 Adjustments possible WLL170T-2 TEACH DLY OFF D. ON L. ON SET RUN OFF /c54 /c55 /c56 /c57 /c223 /c224 /c225 ⑥ Indicating pin correctly inserted LL3 fiber ⑦ LED indicator orange: switching output active ⑧ LED signal strength indicator green, lights up, when light received< 0.9 or >1.1 (switching threshold = 1) ⑨ Teach-in button ⑩ Operating mode selector switch:"SET" (Teach-in mode) /"RUN" (sensor mode) ⑪ OFF delay selector switch: “OFF DLY” (on)/“OFF” (off), 40 ms fixed ⑫ Selector switch: "L.ON" ( light switching) /"D.ON" ( dark switching) Connection diagram Cd-093 + (L+) - (M) Q brn blu blk Teachwht

4 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-08-07 15:48:08

Subject to change without notice

WLL170T-2P192 | WLL170-2 FIBER-OPTIC SENSORS AND FIBERS Dimensional drawing (Dimensions in mm (inch)) WLL170T-2 9,5 11,5 4,3 36,6 79,1 83,7 10,5 41,1 35,5 5,6 810,7 ① Sender LED, installation of LL3 fibre-optic cable (sender fibre) ② Receiver, installation of LL3 fibre optic cable (receiver fibre) ③ Protective hood, can be raised at both ends ④ Mounting bracket, included with delivery ⑤ Connection Recommended accessories Other models and accessories www.sick.com/WLL170-2 Brief description Type Part no. Mounting brackets and plates Mounting bracket, steel, zinc coated, without mounting hardware BEF-WLL170 5306574 Other mounting accessories Rail end piece for block mounting, Stainless steel, mounting hardware included BEF-EB01-W190 5313011 Cutter for fibers, supplied with LL3 FC 5304141 2017-08-07 15:48:08 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 5

SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com