6024 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • Thermostat & temperature sensor in one robust package
  • Stainless steel or brass construction
  • Ideal for immersion sensing where mounting holes are limited The Airpax™ 6024 thermal sensor-switch offers the function and reliability of a grounded case snap-action thermostat with the sensing capability of a solid-state thermistor in a single economical package. The switch is available in temperature ranges from 40°C to 130°C, with a variety of terminal and body options. The 6024 series is ideal for sensing engine oil / coolant or transmission fluid for overheat conditions. Additionally, it provides a solution for engine applications where mounting holes are limited. Contact Ratings Cycles 30,000 Voltage 120VAC / 48VDC Amps 1 (resistive) Contact Operations Either close on rise (make) or open on rise (break), SPST (Single Pole, Single Throw) Operating Temperature 40ºC to 130ºC (104ºF to 266ºF), std tolerance ±5ºC (±8ºF) Dielectric Strength

500 VAC, 60Hz thermostat terminals to case across open contacts

Note: Do not apply dielectric test voltage to the thermistor terminal as permanent damage could occur to the sensor element Insulation Resistance 50 megaohms, minimum at 500 VDC Vibration .06DA, 10-55 Hz, 20G 10-2000 Hz Shock 75G 6ms duration (sawtooth) Materials Stainless steel or brass body and tube, Mylar sleeve, epoxy fill potting, stainless or plated steel terminals, fine silver contacts, gold-plated crossbar for low level switching

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. TEMPERATURE SENSOR SPECIFICATIONS THERMOSTAT TEMPERATURE SETPOINTS Solid-State Sensor Conventional NTC (Ngative Temperature Coefficient) and PTC (Positive Temperature Conefficient) thermistors available. Specific resistance values and tolerances are per customer specifications. Operating Temperature -40ºC to 120ºC (-40ºF to 248ºF) (other ranges available) OPERATE (±5°C) MIN DIFFERENTIAL (°C) MIN RESET (°C) 40 4 20 45 4 20 50 4 30 55 4 30 60 4 40 65 4 40 70 4 50 75 4 50 80 6 55 85 6 55 90 6 60 95 6 60 100 6 70 105 6 70 110 6 80 115 6 80 120 9 85 125 9 85 130 9 90

www.sensata.com Page 3 Copyright © 2018 Sensata Technologies, Inc. TABLE 3: TUBE LENGTH SELECTION A B ORDERING OPTIONS TABLES Example : C6024CBA-5555 Close contacts on temperature rise, 5100 series, isolated case 6” flying leads, 1/2-14 PTF threads, .698” tube length. Non-descript assigned for thermostat temperature and thermistor selection. Basic Product Series Terminal Selection Contact Operation Mounting Thread Selection Tube Length Selection Non-Descript from Sensata 6024 A-F = Reference Table 1 Z = Special Requirements, Customer to Specify O = Open on Rise C = Close on Rise A-D = Reference Table 2 Z = Special Requirements, Customer to Specify A-B = Reference Table 3 Z = Special Requirements, Customer to Specify Non-descript assigned for thermostat temperature and thermistor selection. C C B A6204 5 5 5 5 TABLE 2: MOUNTING THREAD SELECTION A B C D TABLE 1: TERMINAL SELECTION A B C D E F 1. The standard lead wire (materials) for different temperature ranges are as follows: A. Up to 220°F (104.4°C) = # 18 AWG standed. UL Style 1015/CSA approved. (PVC insulation, color black) B. 221°F to 350°F (105°C to 176.6°C) = #18 AWG stranded. UL Style 1199/CSA approved. (Teflon® TFE insulation, color black)

www.sensata.com CONTACT US Americas +1 (888) 438 2214 sensors@sensata.com Europe, Middle East & Africa +31 (74) 357 8156 temperature-info.eu@sensata. com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Revised 3/9/18