2265 ASHCROFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
FEATURES
n Allows for local indication while provoiding switching operations n Adjustable magnetic contacts n Easy installation with multiple Ashcroft pressure gauges and Ashcroft Duratemp® thermometers TYPICAL USES n Oil and gas n Refineries n Chemical and petrochemical plants n Water and wastewater pressure control SPECIFICATIONS Instrument Accuracy: 0.5% -1.5% for use with pressure gauge 1.5% - 2.0% or use with Duratemp® thermometer Size: 41⁄2˝ and 6.0˝ Electrical Contact: 250 V maximum voltage Switching Capacity:
30 W dc maximum switch power
50 VA ac maximum switching power
1 A maximum current
Pointer: Micrometer, adjustable, aluminum Weather Protection: For use with dry case only (gauge). Duratemp®, non adjustable. Not intended for use outside Installs On: Pressure gauges: 1009, 1279, 1377,1379, 1125,1127 Duratemp® thermometers: 600A-02, 600-03 and 600-04 KEY BENEFITS
- Ability to adjust settings without removing instrument from service
- Allows for closed or open circuit
- Use with either pressure or temperature instruments 2265 41⁄2˝ dial size shown (Gauge not included) 100 120 140 160 180 200 220 240 0 100 200 300 400 500 600 700 800 900 1000 Switching current in mA Switching capacity graphs for contact devices AC voltage DC voltage Switching voltage in volts FUNCTION DURAGAUGE® PRESSURE GAUGE DURATEMP® THERMOMETER Above 30 psi 30 psi and below Indication Contact Indication Contact Indication Contact Pointer Carrying Actuating Arm 0.5% 1% 1% 1.5% 1.5% 2% Pointer Carrying One Contact 20% Beyond Contact Point 1% – 1.5% – 2% – Contact Differential Make and Break – -1% -1.5% – 2% NOTE: These tolerances are to be added to the standard tolerance of the gauge or thermometer. Data Sheet
2265 Electric Contacts
All specifications are subject to change without notice. All sales subject to standard terms and conditions. ©2021 Ashcroft Inc. 2265_elec_cont_ds_RevA_04-06-21 ashcroft.com info@ashcroft.com 1.800.328.8258
ORDERING CODE Example: 45 2265 XED Dial Size 45 - 4½˝ 45 60 - 6˝ Model 2265 2265 Code Contact Arrangements XED High and low contact XED XEE Double high contact XEF Double low contact XEG “OFF” at low and high, and “ON” in between X1C Single contact, normally closed X1E Single contact, normally open DIMENSIONS in [ ] are millimeters DEFINITIONS For reference only, consult Ashcroft for specific dimensional drawings 4½˝ Electric Contacts 6.0˝ Electric Contacts XED High and Low Arrangement – the low contact is closed and the high contact is open when the pointer is at its lowest dial reading. XEE Double High Arrangement – both contacts are open when the pointer is at its lowest dial reading. Due to the high hairspring torque of these contacts, the gauge pointer may be slightly above its lowest dial reading. XEF Double Low Arrangement – both contacts are closed when the pointer is at its lowest dial reading. XEG “ Off” at High and Low and “On” In-between Arrangement – the contacts are closed in the center portion of the dial and open at the extremes of the range HIGH AND LOW (XED) LOW HIGH DOUBLE HIGH (XEE) LOWEST HIGHEST DOUBLE LOW (XEF ) LOWEST HIGHEST OFF HIGH AND LOW (XEG) LOW HIGH X1C Single Contact. Open when pointer is at its lowest dial reading. X1E Single Contact. Closed when pointer is at its lowest dial reading. CABLE White Green Yellow X1C X1E /L54706 /L54706 /L54706 /L55444 /L55444 /L55444 /L55446 Data Sheet All specifications are subject to change without notice. All sales subject to standard terms and conditions. ©2021 Ashcroft Inc. 2265_elec_cont_ds_RevA_04-06-21 ashcroft.com info@ashcroft.com 1.800.328.8258