6020312

IM12 SICK | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 28

Technical content

Inductive sensor, IM 12, DC 3-wire, Standard series, Flush Sensing range 2 mm Inductive sensor Short-circuit protection (pulsed) High switching frequency Robust brass housing, nickel- plated with fine thread M12 x 1 mm Enclosure rating IP 67 Dimensional drawing M12x1 2 3 M12x1 2 3 M12x1 60.5

1 Connection

2 Display LED

3 Fastening nuts (2 x); width across 17, metal

3 x 0.22 mm² brn blk blu NO/NC M M8, 3-pin brn blk blu NO M M12, 4-pin brn blk NO blu M3 M12, 4-pin brn blk NC blu M3 See chapter Accessories Connector, M12, 4-pin Connector, M8, 3-pin Mounting systems

Technical data IM12- 02BNO -ZW1 02BNS -ZW1 02BPO -ZW1 02BPS -ZW1 02BNS -ZC1 02BNO -ZC1 02BPO -ZC1 02BPS -ZC1 02BPS -ZT1 02BNS -ZT1 Sensing range Sn 2 mm Electrical configuration DC 3-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 %1) Voltage drop Vd ≤ 1.2 V2) Power consumption ≤ 20 mA3) Continuous current Ia ≤ 200 mA Time delay before availability tv ≤ 100 ms Hysteresis H, of sr 2 ... 10 % Repeatability R ≤ 2 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Switching output NPN PNP Output function Normally open Normally closed Installation Flush Connection type Connector, M8, 3-pin Connector, M12, 4-pin Cable, PVC, 2 m Enclosure rating IP 67 5) Max. switching frequency 2,000 Hz Dimensions M12 x 1 6) Short circuit protection 7) Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +70 °C Housing material Brass nickel-plated, plastic Tightening torque 10 Nm 1) of Ub2) at Ia max 3) without load 4) of sr 5) according to EN 60529 6) thread diameter x pitch (mm) 7) (pulsed) Order information Type Order no. IM12-02BNO-ZW1 6 011 966 IM12-02BNS-ZW1 6 011 964 IM12-02BPO-ZW1 6 011 965 IM12-02BPS-ZW1 6 011 963 IM12-02BNS-ZC1 6 011 972 IM12-02BNO-ZC1 6 011 974 IM12-02BPO-ZC1 6 011 973 IM12-02BPS-ZC1 6 011 971 IM12-02BPS-ZT1 6 011 967 IM12-02BNS-ZT1 6 011 968

Inductive sensor, IM 12, DC 3-wire, Standard series, Non-flush Sensing range 4 mm Inductive sensor Short-circuit protection (pulsed) High switching frequency Robust brass housing, nickel- plated with fine thread M12 x 1 mm Enclosure rating IP 67 Dimensional drawing M12x1 2 3 M12x1 2 3 M12x1 60.5 3 x 0.22 mm² brn blk blu NO/NC M M8, 3-pin brn blk blu NO M M12, 4-pin brn blk NO blu M3 M12, 4-pin brn blk NC blu M3 See chapter Accessories Connector, M12, 4-pin Connector, M8, 3-pin Mounting systems

Technical data IM12- 04NNS -ZW1 04NPS -ZW1 04NPO -ZW1 04NNS -ZC1 04NPO -ZC1 04NPS -ZC1 04NPS -ZT1 04NNS -ZT1 Sensing range Sn 4 mm Electrical configuration DC 3-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 %1) Voltage drop Vd ≤ 1.2 V2) Power consumption ≤ 20 mA3) Continuous current Ia ≤ 200 mA Time delay before availability tv ≤ 100 ms Hysteresis H, of sr 2 ... 10 % Repeatability R ≤ 2 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Switching output NPN PNP Output function Normally open Normally closed Installation Non-flush Connection type Connector, M8, 3-pin Connector, M12, 4-pin Cable, PVC, 2 m Enclosure rating IP 67 5) Max. switching frequency 2,000 Hz Dimensions M12 x 1 6) Short circuit protection 7) Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +70 °C Housing material Brass nickel-plated, plastic Tightening torque 10 Nm 1) of Ub2) at Ia max 3) without load 4) of sr 5) according to EN 60529 6) thread diameter x pitch (mm) 7) (pulsed) Order information Type Order no. IM12-04NNS-ZW1 6 011 976 IM12-04NPS-ZW1 6 011 975 IM12-04NPO-ZW1 6 011 977 IM12-04NNS-ZC1 6 011 984 IM12-04NPO-ZC1 6 011 985 IM12-04NPS-ZC1 6 011 983 IM12-04NPS-ZT1 6 011 979 IM12-04NNS-ZT1 6 011 980

Inductive sensor, IM 12, DC 3-wire, Short version Sensing range 2 / 4 mm Inductive sensor High switching frequency Short-circuit protection (pulsed) Robust brass housing, nickel- plated with fine thread M12 x 1 mm Enclosure rating IP 67 Dimensional drawing M12x1 M12x1 M12x1 2 3 M12x1 2 3 3 x 0.25 mm² brn blk blu NO M M12, 4-pin brn blk NO blu M3 See chapter Accessories Connector, M12, 4-pin Mounting systems

Technical data IM12- 02BNS -ZUK 02BPS -ZUK 02BPS -ZCK 02BNS -ZCK 04NNS -ZUK 04NPS -ZUK 04NPS -ZCK 04NNS -ZCK Sensing range Sn 4 mm 2 mm Electrical configuration DC 3-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 %1) Voltage drop Vd ≤ 1.5 V2) Power consumption ≤ 10 mA3) Continuous current Ia ≤ 300 mA Time delay before availability tv ≤ 2 ms Hysteresis H, of sr 1 ... 10 % Repeatability R ≤ 1 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Switching output NPN PNP Output function Normally open Installation Non-flush Flush Connection type Connector, M12, 4-pin Cable, PUR-PVC, 2 m Enclosure rating IP 67 5) Max. switching frequency 2,000 Hz Dimensions M12 x 1 6) Wire-break protection Short circuit protection 7) Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +75 °C Housing material Brass nickel-plated, plastic Tightening torque 7 Nm 1) of Ub2) at Ia max 3) without load 4) of sr 5) according to EN 60529 6) thread diameter x pitch (mm) 7) (pulsed) Order information Type Order no. IM12-02BNS-ZUK 1 017 438 IM12-02BPS-ZUK 1 017 426 IM12-02BPS-ZCK 1 017 428 IM12-02BNS-ZCK 1 017 440 IM12-04NNS-ZUK 1 017 439 IM12-04NPS-ZUK 1 017 427 IM12-04NPS-ZCK 1 017 429 IM12-04NNS-ZCK 1 017 441

Inductive sensor, IM 12, DC 3-wire, Advanced series, Flush Sensing range 4 mm Inductive sensor Enhanced sensing range High switching frequency Short-circuit protection (pulsed) Robust brass housing, nickel- plated with fine thread M12 x 1 mm Enclosure rating IP 67 Dimensional drawing M12x1 2 3 M12x1 2 3 3 x 0.22 mm² brn blk blu NO/NC M M12, 4-pin brn blk NO blu M3 M12, 4-pin brn blk NC blu M3 See chapter Accessories Connector, M12, 4-pin Mounting systems

Technical data IM12- 04BNS -ZW1 04BPO -ZW1 04BPS -ZW1 04BNS -ZC1 04BPO -ZC1 04BPS -ZC1 Sensing range Sn 4 mm Electrical configuration DC 3-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 %1) Voltage drop Vd ≤ 1.2 V2) Power consumption ≤ 10 mA3) Continuous current Ia ≤ 200 mA Time delay before availability tv ≤ 100 ms Hysteresis H, of sr 1 ... 15 % Repeatability R ≤ 5 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Switching output PNP NPN Output function Normally open Normally closed Installation Flush5) Connection type Connector, M12, 4-pin Cable, PVC, 2 m Enclosure rating IP 67 6) Max. switching frequency 1,000 Hz Dimensions M12 x 1 7) Short circuit protection 8) Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +70 °C Housing material Brass nickel-plated, plastic Tightening torque 10 Nm 1) of Ub2) at Ia max 3) without load 4) of sr 5) see installation notes 6) according to EN 60529 7) thread diameter x pitch (mm) 8) (pulsed) Order information Type Order no. IM12-04BNS-ZW1 7 900 034 IM12-04BPO-ZW1 7 900 035 IM12-04BPS-ZW1 7 900 033 IM12-04BNS-ZC1 7 900 038 IM12-04BPO-ZC1 7 900 039 IM12-04BPS-ZC1 7 900 037

Inductive sensor, IM 12, DC 3-wire, Advanced series, Non-flush Sensing range 8 mm Inductive sensor Enhanced sensing range High switching frequency Short-circuit protection (pulsed) Robust brass housing, nickel- plated with fine thread M12 x 1 mm Enclosure rating IP 67 Dimensional drawing M12x1 2 3 M12x1 2 3 3 x 0.22 mm² brn blk blu NO/NC M M12, 4-pin brn blk NO blu M3 M12, 4-pin brn blk NC blu M3 See chapter Accessories Connector, M12, 4-pin Mounting systems

-ZW1 08NPO -ZW1 08NPS -ZW1 08NNS -ZC1 08NPO -ZC1 08NPS -ZC1 Sensing range Sn 8 mm Electrical configuration DC 3-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 %1) Voltage drop Vd ≤ 1.2 V2) Power consumption ≤ 10 mA3) Continuous current Ia ≤ 200 mA Time delay before availability tv ≤ 100 ms Hysteresis H, of sr 1 ... 15 % Repeatability R ≤ 5 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Switching output PNP NPN Output function Normally open Normally closed Installation Non-flush Connection type Connector, M12, 4-pin Cable, PVC, 2 m Enclosure rating IP 67 5) Max. switching frequency 1,000 Hz Dimensions M12 x 1 6) Short circuit protection 7) Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +70 °C Housing material Brass nickel-plated, plastic Tightening torque 10 Nm 1) of Ub2) at Ia max 3) without load 4) of sr 5) according to EN 60529 6) thread diameter x pitch (mm) 7) (pulsed) Order information Type Order no. IM12-08NNO-ZW1 7 900 044 IM12-08NNS-ZW1 7 900 042 IM12-08NPO-ZW1 7 900 043 IM12-08NPS-ZW1 7 900 041 IM12-08NNS-ZC1 7 900 046 IM12-08NPO-ZC1 7 900 047 IM12-08NPS-ZC1 7 900 045

Inductive sensor, IM 12, DC 3-wire, Advanced short series, Flush Sensing range 4 mm Inductive sensor Enhanced sensing range High switching frequency Short-circuit protection (pulsed) Robust brass housing, nickel- plated with fine thread M12 x 1 mm Enclosure rating IP 67 Dimensional drawing M12x1 2 3 M12x1 52.2 2 3 3 x 0.22 mm² brn blk blu NO M M12, 4-pin brn blk NO blu M3 M12, 4-pin brn blk NC blu M3 See chapter Accessories Connector, M12, 4-pin Mounting systems

Technical data IM12- 04BNS -ZWK 04BPS -ZWK 04BNO -ZCK 04BNS -ZCK 04BPO -ZCK 04BPS -ZCK Sensing range Sn 4 mm Electrical configuration DC 3-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 %1) Voltage drop Vd ≤ 1.5 V2) Power consumption ≤ 10 mA3) Continuous current Ia ≤ 300 mA Time delay before availability tv ≤ 100 ms Hysteresis H, of sr 1 ... 15 % Repeatability R ≤ 5 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Switching output PNP NPN Output function Normally open Normally closed Installation Flush5) Connection type Connector, M12, 4-pin Cable, PVC, 2 m Enclosure rating IP 67 6) Max. switching frequency 2,000 Hz Dimensions M12 x 1 7) Wire-break protection Short circuit protection 8) Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +75 °C Housing material Brass nickel-plated, plastic Tightening torque 7 Nm 1) of Ub2) at Ia max 3) without load 4) of sr 5) see installation notes 6) according to EN 60529 7) thread diameter x pitch (mm) 8) (pulsed) Order information Type Order no. IM12-04BNS-ZWK 6 025 683 IM12-04BPS-ZWK 6 025 682 IM12-04BNO-ZCK 6 025 859 IM12-04BNS-ZCK 6 025 681 IM12-04BPO-ZCK 6 025 680 IM12-04BPS-ZCK 6 025 679

Inductive sensor, IM 12, DC 3-wire, Advanced short series, Non-flush Sensing range 8 mm Inductive sensor Enhanced sensing range High switching frequency Short-circuit protection (pulsed) Robust brass housing, nickel- plated with fine thread M12 x 1 mm Enclosure rating IP 67 Dimensional drawing M12x1 M12x1 52.2 2 3 3 x 0.22 mm² brn blk blu NO M M12, 4-pin brn blk NO blu M3 M12, 4-pin brn blk NC blu M3 See chapter Accessories Connector, M12, 4-pin Mounting systems

Technical data IM12- 08NNS -ZWK 08NPS -ZWK 08NNS -ZCK 08NN O-ZCK 08NPO -ZCK 08NPS -ZCK Ssnsing range Sn 8 mm Electrical configuration DC 3-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 %1) Voltage drop Vd ≤ 1.5 V2) Power consumption ≤ 10 mA3) Continuous current Ia ≤ 300 mA Time delay before availability tv ≤ 100 ms Hysteresis H, of sr 1 ... 15 % Repeatability R ≤ 5 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Switching output PNP NPN Output function Normally open Normally closed Installation Non-flush Connection type Connector, M12, 4-pin Cable, PVC, 2 m Enclosure rating IP 67 5) Max. switching frequency 2,000 Hz Dimensions M12 x 1 6) Wire-break protection Short circuit protection 7) Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +75 °C Housing material Brass nickel-plated, plastic Tightening torque 7 Nm 1) of Ub2) at Ia max 3) without load 4) of sr 5) according to EN 60529 6) thread diameter x pitch (mm) 7) (pulsed) Order information Type Order no. IM12-08NNS-ZWK 6 025 685 IM12-08NPS-ZWK 6 025 684 IM12-08NNS-ZCK 6 025 687 IM12-08NNO-ZCK 6 025 860 IM12-08NPO-ZCK 6 025 688 IM12-08NPS-ZCK 6 025 686

Inductive sensor, IM 12, DC 3-wire, Triplex series Sensing range 6 / 10 mm Inductive sensor Triple sensing range Installation quasi flush or non- flush in metal High switching frequency Short-circuit protection (pulsed) Robust brass housing, chrome- plated with fine thread M12 x 1 mm Enclosure rating IP 67 Dimensional drawing M12x1 M12x1 37128 2 3 M12x1 3 5.7 M12x1 37128 2 3 5.7 3 x 0.34 mm² brn blk blu NO/NC M M12, 4-pin brn blk NO blu M3 See chapter Accessories Connector, M12, 4-pin Mounting systems

Technical data IM12- 06BPO -ZW1 06BPS -ZW1 06BPS -ZC1 10NNS -ZW1 10NPS -ZW1 10NPS -ZC1 Sensing range Sn 10 mm 6 mm Electrical configuration DC 3-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 %1) ≤ 20 %1) Voltage drop Vd ≤ 2 V2) Power consumption ≤ 10 mA3) Continuous current Ia ≤ 200 mA Time delay before availability tv ≤ 100 ms Hysteresis H, of sr 1 ... 15 % Repeatability R ≤ 5 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Switching output PNP NPN Output function Normally open5) Normally closed5) Installation Non-flush Quasi-flush6) Connection type Connector, M12, 4-pin Cable, PVC, 2 m Enclosure rating IP 67 7) Max. switching frequency 400 Hz 800 Hz Dimensions M12 x 1 8) Short circuit protection 9) Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +75 °C Housing material Brass, chrome-plated, plastic Tightening torque 10 Nm 1) of Ub2) at Ia max 3) without load 4) of sr5) other output functions available on re- quest. 6) when mounting in conductible materials the sensors must be installed with a di- stance A to the surface. A Steel, metal = 2 mm/A Stainless steel = 1 mm 7) according to EN 60529 8) thread diameter x pitch (mm) 9) (pulsed) Order information Type Order no. IM12-06BPO-ZW1 6 027 510 IM12-06BPS-ZW1 6 027 509 IM12-06BPS-ZC1 6 027 511 IM12-10NNS-ZW1 6 027 513 IM12-10NPS-ZW1 6 027 512 IM12-10NPS-ZC1 6 027 514

Inductive sensor, IM 12, DC 3-wire, INOX series Sensing range 6 / 10 mm Inductive sensor Triple sensing range Installation flush or non-flush in metal Robust stainless steel V4A, 316L one piece housing, with fine thread M12 x 1 mm Enclosure rating IP 69K Especially suitable for use in the food and beverage sector Dimensional drawing M12x1 411 Ø 10.5 2 3 M12x1 411 Ø 10.5 2 3

3 Fastening nuts (2 x); width across 17, stainless steel V4A,

IM12-06BPO-NC1 IM12-06BNS-NC1 IM12-06BPS-NC1 IM12-10NNS-NC1 IM12-10NPS-NC1 M12, 4-pin brn blk NC blu M3 M12, 4-pin brn blk NO blu M3 See chapter Accessories Connector, M12, 4-pin

Technical data IM12- 06BNS -NC1 06BPO -NC1 06BPS -NC1 10NNS -NC1 10NPS -NC1 Sensing range Sn 10 mm 6 mm Electrical configuration DC 3-wire Supply voltage Vs DC 10 ... 30 V Ripple Vpp ≤ 20 %1) Voltage drop Vd ≤ 2 V2) Current consumption ≤ 15 mA3) Continuous current Ia ≤ 200 mA Time delay before availability tv ≤ 80 ms Hysteresis H (of sr) 1 ... 15 % Repeatability R ≤ 5 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60 947-5-2 Switching output PNP NPN Output function Normally open5) Normally closed5) Installation Non-flush6) Flush Connection types Plug, M12, 4-pin Enclosure rating IP 69K Max. switching frequency 400 Hz Dimensions M12 x 1 7) Short-circuit protection 8) Reverse polarity protection Power-up pulse suppression Shock / vibration stress 30 g, 11 ms / 10 ... 55 Hz, 1 mm Ambient temperature Ta -25 °C ... +75 °C Housing material Stainless steel V4A, 316L Tightening material 10 Nm 1) of Ub2) at Ia max 3) without load 4) of sr 5) other output functions available on request 6) see installation notes 7) thread diameter x pitch (mm) 8) (pulsed) Correction factors: Flush installation: Non-flush installation: Steel (ST37) 1.0 1.0 Copper 0.85 0.8 Aluminium 1.0 1.0 Brass 1.3 1.3 Stainless steel 1 mm / 2 mm thick Order information Type Order no. IM12-06BNS-NC1 6 027 573 IM12-06BPO-NC1 6 027 574 IM12-06BPS-NC1 6 027 572 IM12-10NNS-NC1 6 027 576 IM12-10NPS-NC1 6 027 575

Inductive sensor, IM 12, DC 4-wire, for harsh environments Sensing range 2 / 4 mm Inductive sensor For harsh environment, resistant to most cutting oils Enclosure rating IP 68 Complementary output function Robust brass housing, nickel- plated with fine thread M12 x 1 mm LED status indicator (NO function) Dimensional drawing 12.7 2 3 12.7 2 3 M12, 4-pin brn blk blk NO NC blu M3 See chapter Accessories Connector, M12, 4-pin Mounting systems

Technical data IM12- 02BNP -ZC1 02BPP -ZC1 04NNP -ZC1 04NPP -ZC1 Sensing range Sn 4 mm 2 mm Electrical configuration DC 4-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 %1) Voltage drop Vd ≤ 1.2 V2) Power consumption ≤ 20 mA3) Continuous current Ia ≤ 100 mA Time delay before availability tv ≤ 100 ms Hysteresis H, of sr 2 ... 10 % Repeatability R ≤ 5 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Switching output PNP NPN Output function Complementary Installation Non-flush Flush Connection type Connector, M12, 4-pin Enclosure rating IP 68 Max. switching frequency 2,000 Hz Dimensions M12 x 1 5) Short circuit protection 6) Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +70 °C Housing material Brass nickel-plated, plastic Tightening torque 10 Nm 1) of Ub2) at Ia max 3) without load 4) of sr 5) thread diameter x pitch (mm) 6) (pulsed) Order information Type Order no. IM12-02BNP-ZC1 7 902 924 IM12-02BPP-ZC1 7 902 923 IM12-04NNP-ZC1 7 902 926 IM12-04NPP-ZC1 7 902 925

Inductive sensor, IM 12, DC 4-wire, Multitalents Sensing range 2 / 4 mm Inductive sensor Free configurable output functions in one sensor PNP/NO, PNP/NC NPN/NO, NPN/NC Short-circuit protection Robust brass housing, nickel- plated with fine thread M12 x 1 mm Enclosure rating IP 67 LED status indicator (NO function) Dimensional drawing M12x1 2 3 M12x1 2 3 M12x1 2 3 M12x1 2 3 4 x 0.22 mm² PNP version brn wht blk M blu NO NPN version brn wht blk M blu NC M12, 4-pin PNP version brn wht blk M blu NO NPN version brn wht blk M blu NC See chapter Accessories Connector, M12, 4-pin Mounting systems brn wht blk M Mblu NO brn wht blk M Mblu NC brn wht blk M Mblu NO brn wht blk M Mblu NC

Technical data IM12- 02BCP -ZW1 02BCP -ZC1 04NCP -ZW1 04NCP -ZC1 Sensing range Sn 4 mm 2 mm Electrical configuration DC 4-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 %1) Voltage drop Vd ≤ 1.2 V2) Power consumption ≤ 30 mA3) Continuous current Ia ≤ 100 mA Time delay before availability tv ≤ 250 ms Hysteresis H, of sr 2 ... 10 % Repeatability R ≤ 5 % (Ub and Ta constant)4) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Switching output PNP/NPN config. Output function Configurable Installation Non-flush Flush Connection type Connector, M12, 4-pin Cable, PVC, 2 m Enclosure rating IP 67 5) Max. switching frequency 1,000 Hz Dimensions M12 x 1 6) Short circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +70 °C Housing material Brass nickel-plated, plastic Tightening torque 10 Nm 1) of Ub2) at Ia max 3) without load 4) of sr 5) according to EN 60529 6) thread diameter x pitch (mm) Order information Type Order no. IM12-02BCP-ZW1 7 902 927 IM12-02BCP-ZC1 7 902 928 IM12-04NCP-ZW1 7 902 929 IM12-04NCP-ZC1 7 902 930

Inductive sensor, IM 12, DC 2-wire Sensing range 2 / 4 mm Inductive sensor Short-circuit protection (pulsed) Robust brass housing, nickel- plated with fine thread M12 x 1 mm Enclosure rating IP 67 High switching frequency Dimensional drawing M12x1 2 3 M12x1 2 3 M12x1 2 3 M12x1 2 3 2 x 0.22 mm² brn blu M M12, 4-pin brn blu M See chapter Accessories Connector, M12, 4-pin Mounting systems

Technical data IM12- 02BDS -ZC1 02BDS -ZW1 04NDS -ZC1 04NDS -ZW1 Sensing range Sn 4 mm 2 mm Electrical configuration DC 2-wire Supply voltage Vs DC 10 ... 30 V Residual ripple VPP ≤ 10 % Voltage drop Vd ≤ 2.8 V1) Continuous current Ia ≤ 100 mA Min. load current ≥ 3 mA Residual current ≤ 0.8 mA Time delay before availability tv ≤ 50 ms Hysteresis H, of sr 2 ... 10 % Repeatability R ≤ 5 % (Ub and Ta constant)2) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Output function Normally open3) Installation Non-flush Flush Connection type Cable, PVC, 2 m Connector, M12, 4-pin Enclosure rating IP 67 4) Max. switching frequency 1,500 Hz Dimensions M12 x 1 5) Short circuit protection 6) Reverse polarity protection Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +70 °C Housing material Brass nickel-plated, plastic Tightening torque 10 Nm 1) at Ia max 2) of sr 3) normally closed function available on re- quest 4) according to EN 60529 5) thread diameter x pitch (mm) 6) (pulsed) Order information Type Order no. IM12-02BDS-ZC1 6 020 312 IM12-02BDS-ZW1 6 020 310 IM12-04NDS-ZC1 6 020 316 IM12-04NDS-ZW1 6 020 314

Inductive sensor, IM 12, AC 2-wire Sensing range 2 / 4 mm Inductive sensor Broad supply voltage range in AC Robust brass housing, nickel- plated, with fine thread M12 x 1 mm Enclosure rating IP 67 Dimensional drawing M12x1 5018 Ø 9 2 3 M12x1 Ø 9 2 3 2 x 0.5 mm² brn blu N See chapter Accessories Mounting systems

Technical data IM12- 02BAO -ZU0 02BAS -ZU0 04NAO -ZU0 04NAS -ZU0 Sensing range Sn 4 mm 2 mm Electrical configuration AC 2-wire Supply voltage Vs AC 20 ... 250 V Voltage drop Vd ≤ 8.5 V1) Continuous current Ia ≤ 250 mA (... + 50 °C) Short duration current Ik 0.9 A (20 ms/0.5 Hz) Min. load current 8 mA Residual current ≤3 mA (250 V AC) ≤ 1.5 mA (120 V AC) Time delay before availability tv ≤ 10 ms Hysteresis H, of sr 1 ... 15 % Repeatability R ≤ 10 % (Ub and Ta constant)2) Temperature drift, of sr ± 10 % EMC According to EN 60947-5-2 Output function Normally open Normally closed Installation Non-flush Flush Connection type Cable, PUR-PVC, 2 m Enclosure rating IP 67 3) VDE protection class Max. switching frequency 25 Hz Dimensions M12 x 1 4) Wire-break protection Short circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +80 C Housing material Brass nickel-plated, plastic Tightening torque 7 Nm 1) at Ia max 2) of sr 3) according to EN 60529 4) thread diameter x pitch (mm) Order information Type Order no. IM12-02BAO-ZU0 7 902 119 IM12-02BAS-ZU0 7 902 118 IM12-04NAO-ZU0 7 902 121 IM12-04NAS-ZU0 7 902 120

Inductive sensor, IM 12, NAMUR Sensing range 2 / 4 mm Inductive sensor NAMUR to EN 60 947-5-6 Robust brass housing, nickel- plated, with fine thread M12 x 1 mm Classification PTB 03 ATEX 2037 II 2 G EEx ia IIC T6 Dimensional drawing M12x126 2 30 M12x1 2 30

2 Fastening nuts (2 x); width across 17, metal

2 x 0.34 mm² brn blu M See chapter Accessories Mounting systems Switching units

Technical data IM12- 02B-N- ZW0 04N-N- ZW0 Sensing range Sn 4 mm 2 mm Electrical configuration NAMUR Supply voltage Vs DC 5 ... 25 V Nominal voltage Vn DC 8.2 V Power consumption, attenuated ≤ 1 mA Power consumption, unattenuated ≥ 2.2 mA Internal capacitance ≤ 230 nF Internal inductance ≤ 380 µH Cable resistance ≤ 50 Ohm Temperature drift, of sr ± 10 % EMC Accroding to EN 60 947-5-6 Switching output Control current dependent on switching1) Output function NAMUR Installation Non-flush Flush Connection type Cable, PVC, 2 m Enclosure rating IP 67 2) Max. switching frequency 1,500 Hz 1,200 Hz Dimensions M12 x 1 3) Short-circuit protected Reverse polarity protected Shock/vibration stress 30 g, 11 ms/10 ... 55 Hz, 1 mm Ambient operating temperature Ta -25 °C ... +70 °C Housing material Brass nickel-plated, plastic Tightening torque 7 Nm 1) according to NAMUR EN 60947-5-6 2) according to EN 60529 3) thread diameter x pitch (mm) Max. data for connecting Isolating unit EN 2 EX or other approved isolating amplifier: Short circuit current 1Kmax 50 mA No load voltage UO 16 V Power loss Pmax 75 mW Order information Type Order no. IM12-02B-N-ZW0 6 021 124 IM12-04N-N-ZW0 6 021 125