601C ADVANCEDENERGY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
©2023 Advanced Energy Industries, Inc. The Trek® 601C is a DC-stable, high voltage power amplifier designed to provide precise control of output voltages. It features up to two independent amplifier channels in one enclosure and an all solid-state design for high slew rate, wide bandwidth and low-noise operation. The four-quadrant, active output design of the Trek 601C sinks or sources current into reactive or resistive loads. These features are essential for achieving the accurate output response and high slew rates demanded by reactive loads. PRODUCT HIGHLIGHTS DC accuracy is better than 0.1% of full scale Precision voltage and current monitors provide low-voltage representations of the high voltage output and load current for monitoring purposes or for use as feedback signals in a closed-loop system Remote high-voltage ON-OFF Operation as a non-inverting or inverting amplifier with a fixed gain Different output voltage ranges, input configurations and voltage gain ratios are available; please contact Advanced Energy for more information NIST-traceable Certificate of Calibration provided with each unit TYPICAL APPLICATIONS Driving piezoelectric actuators Modulating electrooptics Electrostatically controlling ion beams Providing remote ON/OFF capabilities for automated or computer controlled systems Output Voltage Range 0 to ±500 V, 0 to -1 kV, or 0 to +1 kV DC or peak AC Output Current Range 0 to ±10 mA DC or 0 to ±20 mA peak AC Slew Rate Greater than 50 V/μs Large Signal Bandwidth (1%) DC to 8 kHz DC Voltage Gain
100 V/V (a gain of 50 V/V is
available for the ±500 V range only) AT A GLANCE TREK 601C High voltage power amplifier with an all-solid-state design for high slew rate, wide bandwidth, and low-noise operation.
2 advancedenergy.com TREK 601C HIGH VOLTAGE POWER AMPLIFIER TECHNICAL DATA Performance Specifications Output Voltage Range 0 to ±500 V, 0 to -1 kV, or 0 to +1 kVDC or peak AC Output Current Range 0 to ±10 mA DC; 0 to ±20 mA peak AC Input Voltage Range 0 to ±10 V DC or peak AC, non-inverting Input Impedance 25 kW, nominal DC Voltage Gain 100 V/V (50 V/V available for ±500 V range only) DC Voltage Gain Accuracy Better than 0.1% of full scale DC Offset Voltage Less than 500 mV Output Noise Less than 10 V rms Slew Rate Greater than 50 V/μs (10% to 90%, typical) Small Signal Bandwidth DC to greater 30 kHz (-3dB) Large Signal Bandwidth DC to greater than 8 kHz, typical (1% distortion) Stability Drift with Time: Less than 100 ppm/hr, noncumulative Drift with Temp: Less than 50 ppm/°C Voltage Monitor Specifications Ratio 1/100th of the high-voltage output DC Accuracy Better than 0.1% of full scale DC Offset Voltage Less than ±5 mV Output Noise Less than 10 mV rms Output Impedance 0.1 W Current Monitor Specifications Ratio 0.5 V/mA DC Accuracy Better than 1% of full scale Offset Voltage Less than ±10 mV Output Noise Less than 20 mV rms Output Impedance 0.1 W Mechanical Specifications Dimensions (H x W x D) Single Channel Instrument 222.3 x 108 x 335 mm (8.75 x 4.25 x 13.2 in) Double Channel Instrument 433.8 x 108 x 335 mm (17 x 4.25 x 13.2 in) Weight Single Channel Instrument 4.3 kg (9.4 lb) Double Channel Instrument 8.6 kg (18.8 lb) HV Connector Caton High Voltage Connector Electrical Specifications Line Voltage Factory set for one of two ranges: 104 to 127 VAC or 180 to 250 VAC at 48 to 63 Hz Power Consumption 150 VA, maximum HV Cable 2 m, 66 pF per foot Environmental Specifications Temperature 0 to 40°C (32 to 104°F) Relative Humidity To 85%, noncondensing Altitude To 2000 meters (6561.68 ft) Measured using the true rms feature of the HP Model 34401A digital multimeter
advancedenergy.com 3 TREK 601C HIGH VOLTAGE POWER AMPLIFIER
Features
Output Voltage Configurations Factory set for 0 to ±500 V DC or peak AC. Other available output voltage ranges are 0 to-1 kV or 0 to +1 kV DC or peak AC. This setting is customer specified. Digital Enable An input providing a connection for a TTL compatible signal to turn on and off the high voltage output. Input Configuration Factory set as a non-inverting amplifier, the Trek 601C can be configured as an inverting amplifier. Dynamic Adjustment Graduated one-turn panel potentiometer is used to optimize the AC response for various load parameters. TECHNICAL DATA REFERENCE NUMBERS Included Accessories PN Description
23146 Operator's Manual
43874R HV Output Cable Assembly, 3 m N5002 Line Cord (90 to 127 VAC) Contact Factory Line Cord (80 to 250 VAC) Optional Accessories PN Description 43874R HV Output Cable, 3 m C4036 603RA Full Rack Mount Kit C4060 603RA-2 Dual Instrument Rack Kit C4008 Half-Rack Mount Kit MODEL 601C
ENG-HV-Trek-601C-235-01 .12.19.23 DS TITLE For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2023 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, Trek®, and AE® are U.S. trademarks of Advanced Energy Industries, Inc.