600X 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
3M™ Diamond Lapping Film 600X Series Product Description Our 3M™ Diamond Lapping Films are comprised of tightly graded diamond mineral uniformly coated on a polyester film backing. Enables long abrasive life with a superior finish throughout the life of the product. Available with or without PSA (Pressure Sensitive Adhesive) backing. Key Features
- Long life
- Produces superior surface finish
- Reduces overall process time
- Produces high yields
- Eliminates slurries
- Consistent results throughout life of product Used in many applications and on a multitude of machines
Applications
Fiber optic connector processing, flat lapping, roll superfinishing. Mineral Size Grading Chart Substrates Ceramics, glass, stone, carbide, composites, exotic alloys and other hard materials. Bonding Resins 3M™ Diamond Lapping Films 631X, 641X, 651X and 661X/668X: Standard resin 3M™ Diamond Lapping Films 660XV , 662XW/666XW: Softer, tougher resin system with higher diamond content 3M™ Diamond Lapping Films 663X/664X: Hardest resin Technical Data November, 2007 Converted Forms Sheets, Discs and Rolls. Maximum width 12 in. Backing Polyester Film Nominal thickness: 1 mil, 1.5 mil, 2 mil, 3 mil Actual thickness: .92 mil, 1.46 mil, 1.97 mil, 2.97 mil, (± 0.05) Ultimate tensile strength - 26,500 psi (typical) Micron Grade Color (nominal)
0.1 Green
0.5 White
1.0 Lavender
1.5 Light Green
3.0 Pink
6.0 Brown
9.0 Blue
15.0 Orange
20.0 Burgundy
30.0 Green
45.0 Amber
60.0 Amber
3M I.D. Number Backing Thickness 1 mil 1.5 mil 2 mil 3 mil 3 mil 3 mil 3 mil Plain back 631X 641X 651X 660XV 661X 662XW 663X PSA back n/a n/a n/a n/a 668X 666XW 664X
3M™ Diamond Lapping Film 600X Series 3M is a trademark of 3M Company. Please recycle. Printed in U.S.A. ©3M 2007. All rights reserved. 60-5002-0032-8 Electronics Markets Materials Division 3M Electronics 3M Center, Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55144-1000 1-800-251-8634 phone 651-778-4244 fax www.3M.com/electronics Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. For Additional Information To request additional product information or to arrange for sales assistance, call toll free 1-800-251-8634. Address correspondence to: 3M Electronics Markets Materials Division, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55144-1000. Our fax number is 651-778-4244 or 1-877-369-2923. In Canada, phone: 1-800-364-3577. In Puerto Rico, phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00. Precautionary Information Refer to Product Label and Material Safety Data Sheet for Health and Safety Information before using this product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501. Number of Uses The number of uses are dependent on equipment, process parameters and materials processing. Storage and Shelf Life Recommended Storage Conditions: Temperature 50 - 90°F (10 - 32°C) Relative humidity 30 - 70% (There is no degradation with time. It is recommended that product be used within 24 months of purchase.)