PPTC600V YINT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Overcurrent protection device Trustworthy electronic circuit protection expert 600V Series www.yint.com.cn Rev:19.3 Polymer PTC Resettable 600V Series Features:
- RoHS Compliant＆ Lead-free
- Radial leaded Devices
- Cured，flameretardant epoxy polymer insulating material meets UL94V-0 requirements Product Dimensions Pig1 Unit ：mm Model Dimensions（mm） Lead material Shape A(max) B(max) C(max) D(typ) Tinned matel(mm) Fig 600V-110 15 15 5.5 5.1 22AWG/Φ0.6 1 600V-150 15 15 5.5 5.1 22AWG/Φ0.6 1 600V-160 15 15 5.5 5.1 22AWG/Φ0.6 1 Note: ① Dimensions A, B, C is the maximum size, D values are typical tolerance of ± 0.75mm Thermal Derating Chart-IH（A） Model Maximum ambient operating temperatures（℃） -40 -20 0 25 30 40 50 60 70 85 600V series 147% 138% 119% 100% 92% 83% 73% 64% 55% 42% Electrical Characteristic Model IHold ITrip Vmaxinterrupt Imax PdMax Maximum Time to Trip resistance（Ω） (A) (A) V A W Current（A） Time（S） Rmin Rmax 600V-110 0.11 0.22 600 3 1.0 1.0 8 6 16 600V-150 0.15 0.30 600 3 1.0 1.0 9 5 14 600V-160 0.16 0.32 600 3 1.0 1.0 10 4 12 IH=Hold current:maximum current at which the device will not trip at 25℃ still air. IT=Trip current:minimum current at which the device will nalways at 25℃ still air. Vmax=Maximum voltage device can withstand without damage at rated current. Imax=Maximum fault current device can withstand tithout damage at rated voltage. Ttrip=Maximum timeto trip(s) at assigned current. A ll data sheet.com
Overcurrent protection device Trustworthy electronic circuit protection expert 600V Series www.yint.com.cn Rev:19.3 Pd=Typical power dissipation:typical amount of power dissipated by the decice when in state air environment. Rmin=Minimum device resistance at 25℃ prior to tripping. Rmax=Maximum device resistance at 25℃ prior to tripping. Environmental Specifications Test Conditions Resistance change Passive aging +85℃，1000hrs ±8% typical Humidity aging +85℃，85%R.H.1000hrs ±8% typical Thermal shock +125℃ to -55℃，10times ±12% typical Resistance to solvent MIL-STD-202，Method 215 No change Vibration MIL-STD-202，Method 201 No change Solder reflow conditions Wave Soldering Soldering Temperature:260℃~270℃ Soldering Time:≤3sec. Soldering Position: Resettable fuse wire and the bottom ≥ 6mm。 Manual soldering Soldering Temperature:250℃~280℃ Soldering Time:≤3sec. Storage Themaximumambienttemperatureshallnotexceed40 ℃.Storagetemperatureshigherthan40 ℃ couldresultin the deformation of packaging materials.The maximum relative humidity recommended for storage is 70%.High humidity with high temperature can accelerate the oxidation the oxidation of the solder plating on the termination and reduce the solderability of the components.sealed plastic bags with desiccant shall be used to teduce the oxidation of the termination and shall only be opened prior to use.the products shall not be stored in areas where harmful gases containing sulfu of chlorine are present. Warning: PPTC devices are intended for protection against occasional over-current or over-temperature fault conditions,and should not be used when repeated fault conditions are anticipated.Operation beyond maximum tatings of improper use may result in device damage and possible electrical arcing and flame. Notes： Thespecificationisintendedtopresentapplication,productandtechnicaldatatoassisttheuser inselectingPPTC circuitproduction devices,However,usersshouldimdependentlyevaluate andtestthe suitabilityofeach product.YINT makesonwarrantiesasto the acduracyorcompletenessoftheinformationanddisclaimsanyliatilityresultingformitsuse,YINT ’sonlyobligationsarethoseimthe YINT StandardRermsandConditions ofSaleandinnocasewillYINT beliable foranyincidental,imdirect,orconsequential damagesarisingfromthesale,resale,or misuesof itsproducts.YINT reservestherighttochangeof update,withoutnotice,any informationcontainedinthisspecification. A ll data sheet.com