MW5IC2030N NXP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 20

Technical content

  • Typical CDMA Performance: VDD = 27 Volts, IDQ1 = 160 mA, IDQ2 = 230 mA, Pout = 5 Watts Avg., Full Frequency Band, IS-95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13), Channel Bandwidth = Power Gain — 23 dB Drain Efficiency — 20% ACPR @ 885 kHz Offset — -49 dBc in 30 kHz Channel Bandwidth Driver Application
  • Typical CDMA Performance: V DD = 27 Volts, IDQ1 = 220 mA, IDQ2 = 240 mA, Pout = 1 Watt Avg., Full Frequency Band, IS-95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13), Channel Bandwidth = Power Gain — 24 dB ACPR @ 885 kHz Offset — -63 dBc in 30 kHz Channel Bandwidth
  • Capable of Handling 10:1 VSWR, @ 27 Vdc, 1990 MHz, 30 Watts CW Output Power
  • Stable into a 3:1 VSWR. All Spurs Below -60 dBc @ 0 to 43 dBm CW Pout.
  • On-Chip Matching (50 Ohm Input, >4 Ohm Output)
  • Integrated Temperature Compensation Capability with Enable/Disable Function
  • On-Chip Current Mirror g m Reference FET for Self Biasing Application (1)
  • Integrated ESD Protection
  • 200°C Capable Plastic Package
  • N Suffix Indicates Lead-Free Terminations. RoHS Compliant.
  • In Tape and Reel. R1 Suffix = 500 Units per 44 mm, 13 inch Reel Select Documentation/Application Notes - AN1987. Document Number: MW5IC2030N Rev. 8, 5/2006 Freescale Semiconductor Technical Data 1930-1990 MHz, 30 W, 26 V GSM/GSM EDGE, W-CDMA, PHS RF LDMOS WIDEBAND INTEGRATED POWER AMPLIFIERS CASE 1329-09 TO-272 WB-16 PLASTIC MW5IC2030NBR1 MW5IC2030NBR1 MW5IC2030GNBR1 CASE 1329A-03 TO-272 WB-16 GULL PLASTIC MW5IC2030GNBR1

Figure 1. Functional Block Diagram Figure 2. Pin Connections © Freescale Semiconductor, Inc., 2006. All rights reserved.

Table 1. Maximum Ratings Table 2. Thermal Characteristics Table 3. ESD Protection Characteristics Table 4. Moisture Sensitivity Level Table 5. Electrical Characteristics (TC = 25°C unless otherwise noted) @ ± 885 kHz Offset. PAR = 9.8 dB @ 0.01 Probability on CCDF.

  1. MTTF calculator available at http://www.freescale.com/rf . Select Tools/Software/Application Software/Calculators to access

the MTTF calculators by product. Select Documentation/Application Notes - AN1955.

Table 5. Electrical Characteristics (TC = 25°C unless otherwise noted) (continued)

12.6 W, 1900 MHz, PHS Signal Mask

Figure 3. MW5IC2030NBR1(GNBR1) Test Circuit Schematic Table 6. MW5IC2030NBR1(GNBR1) Test Circuit Component Designations and Values

Figure 4. MW5IC2030NBR1(GNBR1) Test Circuit Component Layout no impact on form, fit or function of the current product.

Figure 9. Intermodulation Distortion Products Figure 10. Pulse CW Output Power versus Figure 11. 2-Carrier W-CDMA ACPR, IM3, Power Figure 12. Power Gain and Drain Efficiency Figure 13. Power Gain versus Output Power

28 V 32 V

Figure 14. Broadband Frequency Response

Figure 21. Series Equivalent Input and Load Impedance

Figure 22. MW5IC2030NBR1(GNBR1) Test Circuit Schematic for Driver Application Tests Table 7. MW5IC2030NBR1(GNBR1) Test Circuit Component Designations and Values

Figure 23. MW5IC2030NBR1(GNBR1) Test Circuit Component Layout no impact on form, fit or function of the current product.

Figure 24. 2-Carrier N-CDMA ACPR versus Output Power

Figure 25. Series Equivalent Input and Load Impedance for Driver Application

MW5IC2030NBR1 MW5IC2030GNBR1 PACKAGE DIMENSIONS

MW5IC2030NBR1 MW5IC2030GNBR1 RF Device Data Freescale Semiconductor

MW5IC2030NBR1 MW5IC2030GNBR1

MW5IC2030NBR1 MW5IC2030GNBR1 RF Device Data Freescale Semiconductor

MW5IC2030NBR1 MW5IC2030GNBR1

MW5IC2030NBR1 MW5IC2030GNBR1 RF Device Data Freescale Semiconductor

MW5IC2030NBR1 MW5IC2030GNBR1 Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale/C0116 and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2006. All rights reserved. How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center

2 Dai King Street

Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MW5IC2030N Rev. 8, 5/2006 RoHS-compliant and/or Pb-free versions of Freescale products have the functionality and electrical characteristics of their non-RoHS-compliant and/or non-Pb-free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescale’s Environmental Products program, go to http://www.freescale.com/epp.