600 ARIES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

2609 Bartram Road • Bristol, PA 19007-6810 USA

TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • INFO@ARIESELEC.COM 12032 Rev. 7.1 1 of 1 CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED “B” = (NO. OF PIINS PER ROW -1) x 0.100 [2.54] FOR SCREW MACHINE CONTACTS, SEE DATA SHEET 12036 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS

FEATURES

  • Aries offers a full line of DIP headers, available with either coined or screw machine contacts. Consult Data Sheet 12035 for screw machine contacts.
  • Snap-on, protective covers are available for all sizes shown below and accommodate 0.125 [3.18] to 0.750 [9.05] component heights. Consult Data Sheet 12033 for snap-on protective covers.
  • Body cavity design provides additional clearance for component mounting. GENERAL SPECIFICATIONS
  • BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon
  • COINED CONTACTS: Brass,1/2-hard
  • CONTACT PLATING: “0” = 200µ [5.08µm] min. matte Sn plating per ASTM B545-97 over 50µ [1.27µ] min. Ni per QQ-N-290 –OR– “0TL ” = 200u”[5.08µm]90/10 Sn/Pb per MIL-T-10727 Type I over 50u” Ni per QQ-N-290
  • CONTACT CURRENT RATING: 2 amps
  • OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C] for Sn and Sn/Pb plating; -67°F to 257°F [-55°C to 125°C] for Au plating
  • FORK CONTACTS ACCEPTS LEADS: up to 0.025 [0.64] diameter MOUNTING CONSIDERATIONS
  • SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ± 0.05] diameter Series 600 DIP Headers w/Coined Contacts

ORDERING INFORMATION

0 = Sn 0TL = Sn/Pb 1 = Au Pin Style 1 = Fork 2 = Post Series No. of Pins 0.300 – 4 thru 20 0.400 – 22 0.600 – 24, 28, 40 See Table below