515-1070 DIALIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- Complements Dialight’s 515-1022 Four Array Optopipe Light Pipe
- Allows indicators to be positioned above corresponding RJ45 jack or D-Subminiature
- High transmissivity polycarbonate material
- UL94V-0 compliance
- ESD protection (circuit isolation from front panel)
- Wide viewing angle
- Arrays reduce insertion costs
- Secures to PCB by press-fit LED Data For absolute maximum ratings and other electri- cal and optical data on the recommended LEDs, refer to LED data sheets. Dialight Optopipe® Light Pipe Description This light pipe’s two 3 x 5mm rectangular light emitting surfaces appear bright and are optically well isolated. The light pipe is reliably held in place by 2 press-fit pins located at either end of the light pipe array. This Optopipe ® functions as a through-the-case indicator by conducting the light over the top of connectors or switches. A textured finish on the 2 light emitting surfaces maximizes the viewing angle. The recommended light sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The LEDs are mounted in a straight line on an 0.550" pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. Dialight can provide custom Optopipe ® solutions for your applications. Operating/Storage Temperature –30°C to +100°C NOTE: designed for post-reflow PC board insertion.