5751

JZ030 KNOWLES | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 60

Technical content

Datasheet sections

Introduction to Knowles Precision Devices Knowles Precision Devices is a premier global source for Capacitors, RF Filters, EMI Filters, Resonators, non-magnetic components and advanced dielectric materials. An umbrella for the brands of Compex, DLI, Johanson MFG, Novacap, Syfer and Voltronics, Knowles Precision Devices serves a variety of markets including: military, aerospace/avionics, medical equipment, implantable devices, EMI and connector filtering, oil exploration, instrumentation, industrial electronics, automotive, telecoms and data networks. a Knowles Precision Devices brand TM a Knowles Precision Devices brand TM a Knowles Precision Devices brand TM a Knowles Precision Devices brand TM a Knowles Precision Devices brand TM Capacitors: AEC-Q200 ● Capacitors: Broadband Blocks ● Capacitors: Cap Assemblies ● Capacitors: Detonation Pulse ● Capacitors: High Power ● ● ● Capacitors: High Q ● ● ● Capacitors: High Reliability ● ● ● Capacitors: High Temperature ● ● Capacitors: High Voltage ● ● Capacitors: MLC - Leaded ● ● ● Capacitors: MLC - SMD ● ● Capacitors: Non-Magnetic ● ● ● ● Capacitors: Non-Magnetic Trimmers ● ● Capacitors: Planars and Discoidals ● Capacitors: Safety Certified ● ● Capacitors: Single Layer ● ● Capacitors: Trimmers ● ● Dielectric Substrates ● EMI Filters ● Non-Magnetic Hardware ● Non-Magnetic Inductors ● Microwave Couplers ● Microwave Filters ● Microwave Power Dividers ● Microwave Resonators ● RF: Gain Equalizers ● RF: Bias Filter Networks ● RF: Self Bias Networks ● Thin Film: Build To Print ● Heatsink/Standoff ● Mounting Shorts ●

www.knowlescapacitors.com Johanson Tuning Tools Trimmer Series Johanson Part Number Thin-Trim® 4192 4193 Cera-Trim® 4192 Seal-Trim® 4193 4192 2190 JMC 4193 JMC 4193 JMC 4192 JMC 2190JMC 4192 Johanson Tuning Tools Trimmer Series Dia. Johanson Part Number 5200 5300 5400 5500 5600 5700 .130 8777 8764 5800 .078 8777 JMC 8764 JMC 8777 JMC 8777 JMC 4192 Voltronics Product Line Actual Size Length x Width x Height Part Number Cap. Range Min. - Max. pF Temperature Coefficient SRF GHz Mounting Page JZ JZ_HV* 0.177 x 0.126 x 0.059 in 4.5 x 3.2 x 1.5 mm JZ030 JZ060 JZ080 JZ100 JZ150 JZ200 JZ300 JZ400 JZ500 1.5 - 3.0 2.0 - 6.0 3.0 - 8.0 2.0 - 10.0 3.0 - 15.0 4.5 - 20.0 5.5 - 30.0 8.0 - 40.0 8.0 - 50.0 0±200 0±300 -750±500 0±300 0±500 0±500 -1500±1000 -1500±1000 -1500±1000 2.1 1.5 1.25 1.16 0.92 0.81 0.7 0.6 0.53 Surface * Note: We now offer the series in a HIGH VOLTAGE VERSION. The JZ_HV series specifications are identical to the specifications listed above with this important exception: DC Working Voltage 350DC, Withstanding Voltage 750. JR JR_HV* 0.138 x 0.122 x 0.045 in 3.5 x 3.1 x 1.15 mm JR030 JR060 JR080 JR100 JR150 JR200 JR300 JR400 JR500 1.5 - 3.0 2.0 - 6.0 3.0 - 8.0 2.0 - 10.0 3.0 - 15.0 4.5 - 20.0 5.5 - 30.0 8.0 - 40.0 8.0 - 50.0 0±200 0±300 -750±500 0±300 0±500 0±500 -1500±1000 -1500±1000 -1500±1000 2.9 2.05 1.8 1.6 1.3 1.15 0.92 0.84 Surface Johanson Product Line Housing Size Capacitance Tuning Resolution Min. Q @

100 MHz Colour Codes

Thin-Trim® 0.125” (3.18mm) 0.25 to 4pF 90° >1000 Red / Black / Blue / Brown Cera-Trim® 0.180” x 0.167” (4.57 x 4.24mm) 0.6 to 25pF 180° 300 to 3000 Red / Black / Blue / Green / Amber Seal-Trim® 0.270” (6.86mm) 1 to 50pF 180° >200 to >1000 - Half Turn Ceramic SM Chip Trimmers - Product Guide Voltronics Tuning Tools Trimmer Series Dia. Voltronics Part Number JZ & JZ_HV JR & JR_HV 0.45 TT-400 TT-900 VOLTRONICS TT-900VOLTRONICS TT-400

www.knowlescapacitors.com .087 .018 .059

2.2 DIA

.45 1.5 .031 .039 .177 4.5 .126 3.2 .126 DIA ROTOR TERMINAL 3.2 .126 SETTING INDICATOR SHOWN AT MAX C.3.2 DIA 1.0 .031 .033 .85 4.75 3.05 1.4 SOLDER RESIST SOLDERING PAD .187 .120 .055 Dimensions - Drawing tolerances where not specified ± 0.008”/0.2mm Solder Pad Layout Recommended thickness of solder paste 0.15mm Recommended Reflow Solder Temperature Profile Pre-Heating (In air) Soldering Gradual Cooling (In air) 250 200 150 100 Temperature °C 260°C One Minute Minimum

20 Seconds

Ceramic Chip Trimmers - JZ & JZ_HV Series General specifications Part No. JZ Series JZ030 JZ060 JZ080 JZ100 JZ150 JZ200 JZ300 JZ400 JZ500 DC Working Voltage 125 125 125 125 125 125 125 125 125 DC Withstanding Voltage 250 250 250 250 250 250 250 250 250 Part No. JZ_HV Series JZ030HV JZ060HV JZ080HV JZ100HV JZ150HV JZ200HV JZ300HV JZ400HV DC Working Voltage 350 350 350 350 350 350 350 350 DC Withstanding Voltage 700 700 700 700 700 700 700 700 Capacitance (pF) Minimum Maximum 1.5 3.0 +50% – 0% 2.0 6.0 +50% – 0% 3.0 8.0 +50% – 0% 2.0 10.0 +100% – 0% 3.0 15.0 +100% – 0% 4.5 20.0 +100% – 0% 5.5 30.0 +100% – 0% 8.0 40.0 +100% – 0% 8.0 50.0 +100% – 0% Marking Color* Black Blue Violet White Pink Red Orange Yellow Green Temperature Coefficient (ppm/ºC) 0 ± 200 0 ± 300 -750 ± 500 0 ± 300 0 ± 500 0 ± 500 -1500 ± 1000 -1500 ± 1000 -1500 ± 1000 Approximate Self Resonant Frequency at Maximum Rated Capacitance JZ & JZ_HV Series Insulation Resistance 104 MΩ Operating Temperature -40°C to +85°C (Tunable temp range -25°C to +85°C) Torque 0.14 to 1.0 in-oz Packaging All parts furnished on 12mm tape and reel. 1,000 pcs. per reel. * HV parts are indicated by a second, green dot. Recommended Tuning Tools Ceramic Tipped: TT-900Ceramic Tipped: TT-400 4.50 114.3 .88 22.35 VOLTRONICS .88 22.35 .032 0.81 .008 0.2 .281 7.14 .018 0.45 .110 2.79 .115 2.92 4.30 ROTATES TO ALLOW FOR EASY TUNING Ø .39 Ø .55 Ø .16 A B a Knowles Precision Devices brand TM

www.knowlescapacitors.com Pre-Heating (In air) Soldering Gradual Cooling (In air) 250 200 150 100 Temperature °C 260°C One Minute Minimum .122.087 .063.059 .138 .018 .122 .045

3.1 DIA

3.5 1.61.5 3.12.2 DIA .45 .028 .063 .028 .063 .047 .059 1.15 0.7 0.7 1.6 1.6 .016 0.4 .016 0.4 1.2 1.5 ROTOR TERMINAL SETTING INDICATOR SHOWN AT MAX C. 0.94 .173 .071 4.4 2.4 1.8 SOLDER RESIST SOLDERING PAD Dimensions - Drawing tolerances where not specified ± 0.008”/0.2mm Solder Pad Layout Recommended thickness of solder paste 0.15mm Recommended Reflow Solder Temperature Profile Recommended Tuning Tools Ceramic Tipped: TT-900Ceramic Tipped: TT-400 4.50 114.3 .88 22.35 VOLTRONICS .88 22.35 .032 0.81 .008 0.2 .281 7.14 .018 0.45 .110 2.79 .115 2.92 4.30 ROTATES TO ALLOW FOR EASY TUNING Ø .39 Ø .55 Ø .16 A B Ceramic Chip Trimmers - JR & JR_HV Series General specifications Part No. JR Series JR030 JR060 JR080 JR100 JR150 JR200 JR300 JR400 JR500 DC Working Voltage 125 125 125 125 125 125 125 125 125 DC Withstanding Voltage 250 250 250 250 250 250 250 250 250 Part No. JR_HV Series JR030HV JR060HV JR080HV JR100HV JR150HV JR200HV JR300HV JR400HV DC Working Voltage 350 350 350 350 350 350 350 350 DC Withstanding Voltage 700 700 700 700 700 700 700 700 Capacitance (pF) Minimum Maximum 1.5 3.0 +50% – 0% 2.0 6.0 +50% – 0% 3.0 8.0 +50% – 0% 2.0 10.0 +100% – 0% 3.0 15.0 +100% – 0% 4.5 20.0 +100% – 0% 5.5 30.0 +100% – 0% 8.0 40.0 +100% – 0% 8.0 50.0 +100% – 0% Marking Color* Black Blue Violet White Pink Red Orange Yellow Green Temperature Coefficient (ppm/ºC) 0 ± 200 0 ± 300 -750 ± 500 0 ± 300 0 ± 500 0 ± 500 -1500 ± 1000 -1500 ± 1000 -1500 ± 1000 Approximate Self Resonant Frequency at Maximum Rated Capacitance JR & JR_HV Series Insulation Resistance 104 MΩ Operating Temperature -40°C to +85°C (Tunable temp range -25°C to +85°C) Torque 0.6 in-oz max. Packaging All parts furnished on 12mm tape and reel. 1,000 pcs. per reel. * HV parts are indicated by a second, green dot. a Knowles Precision Devices brand TM

www.knowlescapacitors.com Series Housing Size Capacitance Tuning Resolution Min. Q @

100 MHz Color Code Drawing Figure

9401-0 0.125” (3.18mm) 0.25 to 0.7pF 90° >1000 Red A 9401-0SL-1 0.125” (3.18mm) 0.25 to 0.7pF 90° >1000 Red B 9401-1 0.125” (3.18mm) 0.5 to 1.3pF 90° >1000 Black A 9401-1SL-1 0.125” (3.18mm) 0.5 to 1.3pF 90° >1000 Black B 9401-2 0.125” (3.18mm) 0.6 to 2pF 90° >1000 Blue A 9401-2SL-1 0.125” (3.18mm) 0.6 to 2pF 90° >1000 Blue B 9401-4 0.125” (3.18mm) 1.5 to 4pF 90° >500 Brown A 9401-4SL-1 0.125” (3.18mm) 1.5 to 4pF 90° >500 Brown B Characteristics Rated voltage: 250 VDC (test voltage 500 VDC)  Insulation resistance: >104 MΩ  Operating temperature range: -55ºC to +125ºC  Torque: 0.05 to 0.5 oz. in.  Vibration: 15g, 10-2000 Hz  Shock: 100g, 6 milliseconds  Setting drift: <1%  Moisture resistance: MIL-STD-202, Method 106  Resistant to soldering heat: MIL-STD-202, Method 210, Test C  Solderability: MIL-STD-202, Method 208  Resistant to cleaning solvents: MIL-STD-202, Method 215 JMC Square Drive Tuning Tool 4192 The Thin-Trim® 9401 Series capacitors are an advanced development in miniaturized trimmers for applications in circuits where size and performance are critical. These one-half turn ceramic capacitors feature high Q performance up to 2GHz and beyond. The 9401 Series construction incorporates a butterfly electrode pattern which provides a series parallel capacitor with extremely low ESR and ESL. Johanson’s square drive tuning mechanism insures captive, non-slip, tamper-proof adjustments eliminating backlash problems.

Applications

 RF amplifier  LC Filters and Networks  Broadband Wireless LAN  Medical Devices  Cordless and Cellular phones  DR/Crystal Oscillator  Microstrip line filters Packaging Tape and reel available for SL products Add suffix to JMC P/N for reel packaging R1 = 1500 pieces, R4 = 6000 pieces .125 (3.18) .040 (1.02) MAX. 60º 2x .020±.002 (.508±.051) .004±.001 (.102±.025) .195±.010 (4.95±.254) .195±.010 (4.95±.254) .150 (3.81) MAX. DIA. COLOR CODE .025 (.635) SQUARE DRIVE TUNING .140 (3.56) MAX. Q FREQUENCY MHz 9401-0 9401-1 9401-4 10,000 1000 100 0 250 500 750 1000 1250 1500 1750 2000 2250 .125 (3.18) .040 (1.02) MAX. .020±.002 (.508±.051) .004±.001 (.102±.025) .200±.010 (5.08±.254) .150 (3.81) DIA. COLOR CODE .025 (.635) SQUARE DRIVE TUNING .140 (3.56) MAX. Dimensions: inches (mm) Dimensions: inches (mm) 9401 9401 SL-1 .025 (.635) JMC 4192 Thin-Trim® Trimmers - 9401 Series

www.knowlescapacitors.com Thin-Trim® Trimmers - 9402 & 9410 Series Thin-Trim® 9402 & 9410 Series capacitors are an advanced development in miniaturized trimmer capacitors for applications in circuits where size and performance are critical. The Thin-Trim® capacitor embodies a radical reduction in size and weight over standard ceramic capacitors, with a proportional improvement in electrical characteristics. The capacitor consists of a metallic rotor suspended under spring pressure between two metalized dielectric disks. In addition to physically securing the assembly, the springs serve as both the internal electrical connection and the external terminals, simplifying the construction and further reducing size. The incorporation of the Johanson square drive tuning mechanism insures captive, non-slip, tamper-proof adjustments which are not subject to backlash problems associated with screwdriver type adjustments. Characteristics Rated voltage: 250 VDC (test voltage 500 VDC)  Insulation resistance: >104 MΩ  Operating temperature range: -55ºC to +125ºC  Torque: 0.05 to 1.0 oz. in. 0.2 to 2.0 oz. in. for 9410  Vibration: 15g, 10-2000 Hz  Shock: 100g, 6 milliseconds  Setting drift: <1%  Moisture resistance: MIL-STD-202, Method 106  Resistant to soldering heat: MIL-STD-202, Method 210, Test C  Solderability: MIL-STD-202, Method 208  Resistant to cleaning solvents: MIL-STD-202, Method 215 JMC Square Drive Tuning Tool 4192 for 9402 JMC Square Drive Tuning Tool 4193 for 9410  RF amplifier  LC Filters and Networks  Broadband Wireless LAN  Medical Devices  Cordless and Cellular phones  DR/Crystal Oscillator  Microstrip line filters Series Housing Size Capacitance Tuning Resolution Min. Q @ 0.5 to 2.5pF 180°

3000 Red

A 9402-0SL-1 0.125” (3.18mm) 180° B 1.0 to 5.0pF 180°

1000 Black

A 9402-1SL-1 0.125” (3.18mm) 180° B 2.5 to 10pF 180°

1000 Blue

A 9402-2SL-1 0.125” (3.18mm) 180° B 3.0 to 12pF 180°

500 Brown

A 9402-4SL-1 0.125” (3.18mm) 180° B 6.0 to 25pF 180°

300 Yellow

A 9402-6SL-1 0.125” (3.18mm) 180° B 5.0 to 15pF 180°

750 None

A 9402-8SL-1 0.125” (3.18mm) 180° B 5.0 to 18pF 180°

500 Grey

A 9402-9SL-1 0.125” (3.18mm) 180° B 1.0 to 4.5pF 180°

1000 Red

C 9410-0SL-1 0.200” (5.08mm) 180° D 2.5 to 10pF 180° C 9410-1SL-1 0.200” (5.08mm) 180° D 4.0 to 18pF 180°

700 Blue

C 9410-2SL-1 0.200” (5.08mm) 180° D 6.0 to 35pF 180°

200 Orange

C 9410-3SL-1 0.200” (5.08mm) 180° D 7.0 to 40pF 180°

200 Brown

C 9410-4SL-1 0.200” (5.08mm) 180° D 8.0 to 50pF 180°

200 Green

C 9410-5SL-1 0.200” (5.08mm) 180° D 5.0 to 25pF 180°

200 Yellow

C 9410-25SL-1 0.200” (5.08mm) 180° D Packaging Tape and reel available for 9402-SL & 9410-SL products Add suffix to JMC P/N for reel packaging 9410-SL R7 = 3000 pieces .030 (.762) JMC 4193 .025 (.635) JMC 4192

www.knowlescapacitors.com Thin-Trim® Trimmers - 9402 & 9410 Series Dimensions: inches (mm) Dimensions: inches (mm) Dimensions: inches (mm) Dimensions: inches (mm) 9402 9402-SL-1 9410 9410-SL-1 .125 (3.18) MAX. .141 (3.58) Ø MAX. .125 (3.18) 60º .025 (.635) SQUARE DRIVE TUNING COLOR CODE .004 ±.001 (.102 ±.025) .020 ±.002 (.508 ±.051) ROTOR .040 ±1.02 .195 ±.010 (4.95 ±.254) .195 ±.010 (4.95 ±.254) 45º .125 (3.18) MAX. .141 (3.58) Ø MAX. .125 (3.18) .025 (.635) SQUARE DRIVE TUNING COLOR CODE .004 ±.001 (.102 ±.025) .020 ±.002 (.508 ±.051) ROTOR .040 ±1.02 .200±.010 (5.08±.254) Q VS. Frequency 9402 Series 9402-8 9402-6 9402-9 9402-4 9402-2 9402-1 9402-0 100 1000 2000 Q (AT MAX. RATED CAPACITANCE 200 400 600 800 1000 1200 1400 1600 1800 FREQUENCY (MHz) .200 (5.08) 60º 2x .200 (5.08) .030 (.762) SQUARE DRIVE TUNING COLOR CODE Ø.225 MAX. ROTOR .040 ±.002 .005 .300 ±.010 (7.62 ±.254) .300 ±.010 (7.62 ±.254) .200 (5.08) .060 (1.52) MAX. .040 ±.002 (2.64 ±.051) .005 ±.001 (.127 ±.025) .250 +.000 -.010 (6.35 +.000 -.254) .225 (5.72) MAX. DIA. COLOR CODE .030 (.762) SQUARE DRIVE TUNING .200 (5.08) MAX. Q VS. Frequency 9410 Series 9410-4 9410-5 9410-3 9410-25 9410-2 9410-1 9410-0 100 1000 2000 Q (AT MAX. RATED CAPACITANCE 200 400 600 800 1000 1200 1400 1600 1800 FREQUENCY (MHz) Figure DFigure C Figure BFigure A

www.knowlescapacitors.com Thin-Trim® 9702 & 9710 Series capacitors are an advanced development in miniaturized trimmer capacitors for applications in circuits where size and performance are critical. The Thin-Trim® capacitor embodies a radical reduction in size and weight over standard ceramic capacitors, with a proportional improvement in electrical characteristics. The capacitor consists of a metallic rotor suspended under spring pressure between two metalized dielectric disks. In addition to physically securing the assembly, the springs serve as both the internal electrical connection and the external terminals, simplifying the construction and further reducing size. The incorporation of the Johanson square drive tuning mechanism insures captive, non-slip, tamper-proof adjustments which are not subject to backlash problems associated with screwdriver type adjustments. Characteristics Rated voltage: 250 VDC (test voltage 500 VDC)  Insulation resistance: >104 MΩ  Operating temperature range: -55ºC to +125ºC  Torque: 0.05 to 1.0 oz. in. for 9702 0.2 to 2.0 oz. in. for 9710  Vibration: 15g, 10-2000 Hz  Shock: 100g, 6 milliseconds  Setting drift: <1%  Moisture resistance: MIL-STD-202, Method 106  Resistant to soldering heat: MIL-STD-202, Method 210, Test C  Solderability: MIL-STD-202, Method 208  Resistant to cleaning solvents: MIL-STD-202, Method 215  RoHS compliant JMC Square Drive Tuning Tool 4192 for 9702 Series Housing Size Capacitance Tuning Resolution Min. Q @

100 MHz Drawing Figure

9702-0 0.125” (3.18mm) 0.5 to 2.5pF 180° 3000 A 9710-0 0.200” (5.08mm) 1.0 to 4.5pF 180° 1000 B 9702-1 0.125” (3.18mm) 1.0 to 5.0pF 180° 1000 A 2.5 to 10pF 180° 1000 A 9710-1 0.200” (5.08mm) 180° 1000 B 9702-4 0.125” (3.18mm) 3.0 to 12pF 180° 500 A 9710-2 0.200” (5.08mm) 4.0 to 18pF 180° 700 B 9702-8 0.125” (3.18mm) 5.0 to 15pF 180° 750 A 9702-5 0.125” (3.18mm) 5.0 to 20pF 180° 500 A 9710-7 0.200” (5.08mm) 5.0 to 25pF 180° 500 B 9710-3 0.200” (5.08mm) 6.0 to 35pF 180° 200 B 9702-9 0.125” (3.18mm) 7.0 to 18pF 180° 500 A 9710-4 0.200” (5.08mm) 7.0 to 40pF 180° 200 B 9702-6 0.125” (3.18mm) 8.0 to 25pF 180° 300 A 9710-5 0.200” (5.08mm) 10.0 to 50pF 180° 200 B Packaging Tape and reel available for 9702 & 9710 products Add suffix to JMC P/N for reel packaging .030 (.762) JMC 4193 Dimensions: inches (mm) Dimensions: inches (mm) 9702 9710 Figure BFigure A .200 (5.08) 60º 2x .200 (5.08) .030 (.762) SQUARE DRIVE TUNING Ø.225 MAX. ROTOR .040 ±.002 .005 .300 ±.010 (7.62 ±.254) .300 ±.010 (7.62 ±.254) .125 (3.18) MAX. .141 (3.58) Ø MAX. .125 (3.18) 60º .025 (.635) SQUARE DRIVE TUNING .004 ±.001 (.102 ±.025) .020 ±.002 (.508 ±.051) ROTOR .040 ±1.02 .195 ±.010 (4.95 ±.254) .195 ±.010 (4.95 ±.254) 45º JMC Square Drive Tuning Tool 4193 for 9710  RF amplifier  LC Filters and Networks  Broadband Wireless LAN  Medical Devices  Cordless and Cellular phones  DR/Crystal Oscillator  Microstrip line filters .025 (.635) JMC 4192 Thin-Trim® Trimmers - 9702 & 9710 Series

www.knowlescapacitors.com 2320 Series

2322 RoHS

Min. Q @ 100MHz Color Codes Drawing Figure Std./RoHS Cera-Trim® is a high performance surface mount trimmer capacitor designed specifically to withstand harsh environments. These capacitors deliver exceptional performance through microwave frequencies at operating temperatures of -55ºC to +125ºC. The square drive tuning mechanism provides and assures complete compatibility with automated tuning devices for positive non-slip tamper-proof adjustments. The Cera-Trim ® design makes it possible to utilize tape and reel. The alumina housing provides mechanical strength with outstanding electrical and heat resistant properties. The rugged construction renders it resistant to penetration of solder fluxes and cleaning solvents. Recommended handling instructions outlining soldering procedures are available in Johanson specification R-360. Characteristics Rated voltage: 250 VDC (test voltage 500 VDC)  Insulation resistance: >104 MΩ  Operating temperature range: -55ºC to +125ºC  Vibration: 15g, 10-2000 Hz, MIL-STD-202, Method 204, Condition B  Shock: 100g, 6 milliseconds, MIL-STD-202, Method 213, Condition I  Moisture resistance: MIL-STD-202, Method 106  Resistant to soldering heat and flux: 260ºC for 10 seconds  Solderability: MIL-STD-202, Method 208  Withstands up to 5 minutes total immersion in typical cleaning solvents at room temperature  Conforms with specification MIL-C-81  RoHS compliant Series Packaging Add suffix to JMC P/N for reel packaging R1 = 500 pieces, R2 = 2,500 pieces .025 (.635) JMC 4192 Dimensions: inches (mm) Sealed SL .004 (.102) .025 SQUARE DRIVE TUNING .180 KAPTON® PROCESS SEAL .020 ±.002 (.508 ±.051) 2X .167 (4.24) .086 (2.18) INDICATES ROTOR TERMINAL .195 (4.95) .240 (6.10) .092 (2.34) COLOR CODE (Non-RoHS Compliant) TERMINAL 2X COLOR CODED EPOXY BACK (RoHS Compliant) Figure B Dimensions: inches (mm) Sealed COLOR CODE (Non-RoHS Compliant) .030 (7.62) (2X) .025 SQUARE DRIVE TUNING .180 KAPTON® PROCESS SEAL .020 ±.002 (.508 ±.051) 2X .167 (4.24) .086 (2.18) INDICATES ROTOR TERMINAL TERMINAL 2X .195 (4.95) .092 (2.34) COLOR CODED EPOXY BACK (RoHS Compliant) Figure A  RF amplifier  LC Filters and Networks  Broadband Wireless LAN  Medical Devices  Cordless and Cellular phones  DR/Crystal Oscillator  Microstrip line filters JMC Square Drive Tuning Tool 4192 for 2320 & 2322 Series Cera-Trim® Trimmers - 2320 & 2322 Series

www.knowlescapacitors.com 9610 Series

9810 RoHS

Min. Q @

100 MHz

9610 9810 0.270” (6.86mm) 1 to 4.5pF 1 to 4.5pF 180° >1000 A 9610-SL 9810-SL 0.270” (6.86mm) 180° B 9611 9811 0.270” (6.86mm) 2.5 to 10pF 2.5 to 10pF 180° >1000 A 9611-SL 9811-SL 0.270” (6.86mm) 180° B 9612 9812 0.270” (6.86mm) 4 to 18pF 4 to 18pF 180° >700 A 9612-SL 9812-SL 0.270” (6.86mm) 180° B 9613 9813 0.270” (6.86mm) 6 to 35pF 6 to 35pF 180° >200 A 9613-SL 9813-SL 0.270” (6.86mm) 180° B 9614 9814 0.270” (6.86mm) 7 to 40pF 7 to 40pF 180° >200 A 9614-SL 9814-SL 0.270” (6.86mm) 180° B 9615 9815 0.270” (6.86mm) 5 to 25pF 5 to 25pF 180° >200 A 9615-SL 9815-SL 0.270” (6.86mm) 180° B 9616 9816 0.270” (6.86mm) 8 to 50pF 10.5 to 50pF 180° >200 A 9616-SL 9816-SL 0.270” (6.86mm) 180° B The Seal-Trim® is a high performance Thin-Trim® trimmer ceramic capacitor encapsulated in a polymer housing. This design resists intrusion of dirt, dust, solder flux and cleaning agents during assembly and atmospheric contamination during use. These capacitors offer low drift rates and high Q, making them ideal for higher frequency applications beyond the limits of ordinary ceramic trimmer capacitors. The incorporation of the Johanson square drive tuning mechanism insures captive non-slip, tamper-proof adjustments which are not subject to backlash problems associated with screwdriver type adjustment slots. Characteristics Rated voltages:

250 VDC (test voltage 500 VDC) for 9610, 9620, 9810 & 9820

400 VDC (test voltage 800 VDC) for 9694

 Insulation resistance: >104 MΩ  Operating temperature range: -55ºC to +125ºC  Torque: 0.2 to 2.0 for 9610, 9694 0.05 to 1.0 for 9620  Vibration: 15g, 10-2000 Hz, MIL-STD-202, Method 204  Shock: 100g, 6 milliseconds, MIL-STD-202, Method 21  Setting drift: <1%; <2% for 9616, 9694  Moisture resistance: MIL-STD-202, Method 106  Resistant to soldering heat: MIL-STD-202, Method 210, Test C  Solderability: MIL-STD-202, Method 208 .030 (.762) JMC 4193 JMC Drive Tuning Tool 4193 for 9610, 9620, 9810 & 9820 Series Dimensions: inches (mm) 9610-SL 60º .040 ±.002 (1.02 ±.051) .270 ±.010 (6.86 ±.254) .030 (.762) SQUARE DRIVE TUNING ROTOR R .005 ±.001 (1.27 ±.025) .110 (2.79) .260 (6.60) .260 (6.60) Figure B Dimensions: inches (mm) 9610 .030 (.762) SQUARE DRIVE TUNING .270 ±.010 (6.86 ±.254) .100 ±.015 (2.54 ±.381) .040 ±.002 (1.02 ±.051) .005 ±.015 (3.81 ±.381) .220 (5.59)60º .150 ±.015 (3.81 ±.381) ROTOR R Figure A  Resistant to cleaning solvents: MIL-STD-202, Method 215  RoHS compliant Series Seal-Trim® Trimmers - 9610 & 9810 Series

www.knowlescapacitors.com JMC Square Drive Tuning Tool 4192 for 9620 & 9820 Series JMC Square Drive Tuning Tool 2190 for 9694 .025 (.635) JMC 4192 .050 (1.27) JMC 2190 Seal-Trim® Trimmers - 9620 & 9820 Series 9620 Series

9820 RoHS

Min. Q @ 9620 9820 0.180” (4.57mm) 0.5 to 2.5pF 0.5 to 2.5pF 180° >1000 C 9620-SL 9820-SL 0.180” (4.57mm) 180° D 9621 9821 0.180” (4.57mm) 1.0 to 5.0pF 1.0 to 5.0pF 180° >1000 C 9621-SL 9821-SL 0.180” (4.57mm) 180° D 9622 9822 0.180” (4.57mm) 2.5 to 10pF 2.5 to 10pF 180° >1000 C 9622-SL 9822-SL 0.180” (4.57mm) 180° D 9626 9826 0.180” (4.57mm) 6 to 25pF 8.5 to 25pF 180° >300 C 9626-SL 9826-SL 0.180” (4.57mm) 180° D 9628 9828 0.180” (4.57mm) 5 to 15pF 5 to 15pF 180° >750 C 9628-SL 9828-SL 0.180” (4.57mm) 180° D 9629 9829 0.180” (4.57mm) 5 to 20pF 7.5 to 20pF 180° >500 C 9629-SL 9829-SL 0.180” (4.57mm) 180° D 9694 - 0.390” (9.91mm) 7.5 to 50pF - 180° >1000 @ 1 MHz E Dimensions: inches (mm) Dimensions: inches (mm) 9620 9620-SL .025 (.635) SQUARE DRIVE TUNING .180 ±.010 (4.57 ±.254) .085 ±.015 (2.16 ±.381) .040 ±.002 (1.02 ±.051) .004 ±.001 (.102 ±.025) .220 (5.59)60º .085 ±.015 (2.16 ±.381) ROTOR 45º .020 ±.002 (.508 ±.061) 60º .020 ±.002 (.508 ±.051) .180 ±.010 SQUARE DRIVE TUNING ROTOR .004 ±.001 .160 (4.06) .160 (4.06) 45º Figure DFigure C Dimensions: inches (mm) 9694 .050 (1.27) SQUARE DRIVE TUNING .390 ±.010 (9.91 ±.254) .125 ±.015 (3.18 ±.381) .064 ±.002 (1.63 ±.051) .006 ±.001 (.152 ±.025) .330 (8.38)60º .150 ±.015 (3.81 ±.381) ROTOR R Figure E

www.knowlescapacitors.com Product Selection Guide - Consult Factory for Complete Catalog Product Line Description Series Maximum Capacitance Maximum DC Working Voltage Typical minimum Q value Page A1_4/8 A1_12 Miniature PTFE Dielectric NM or A4_HV 12pF 1000 2000 - 4000 22 A4_3 A4_5 NM or A1_HV 5pF 1000 2000 - 3000 23 A_HV High Voltage PTFE Dielectric NM or A_HV 30pF 1000 2000 24 A_HV Ext Range NM or A_HV 55pF ext. range 1000 780 - 2000 24 K_HV NM or K_HV 15pF 1000 780 - 2000 25 NT 20kV PTFE Dielectric NM NT 95pF 10000 2000 27 GLASS Glass Dielectric NM HTM NM TF NM TM NM TP 250pF 36pF 130pF 180pF 1250 1000 1250 1250 250 - 1000 34 QUARTZ Quartz Dielectric NM QM 24pF 1250 2000 34 Air & PTFE Trimmers - Product Guide a Knowles Precision Devices brand TM Note: Most of the above trimmer capacitors can be ordered as non-magnetic - see non-magnetic section.

www.knowlescapacitors.com Johanson Air Trimmers - Product Guide Johanson Part No. Capacitance Range (pF) Number of Turns Working Voltage (VDC) Tuning Torque (oz. in) Q @ 100 MHz Page 5200 0.8 to 10pF >6 250 1 - 5 >5000 5201 16 5202 17 5302 1 to 10pF >10 500 1 - 6 >2000 17 5400 1 to 14pF >6 250 1 - 5 >3000 5401 16 5402 17 5451 1 to 16pF >6 250 1 - 5 >3000 5453 1.5 to 16pF 18 5500 1 to 20pF >12 250 1 - 5 >1500 5501 16 5502 17 5600 1 to 30pF >20 250 1 - 5 >800 5601 16 5602 17 5700 0.6 to 6pF >7 250 0.4 - 4 >10000 5701 16 5702 17 5750 0.8 to 10pF >8 250 0.4 - 4 >7500 5751 16 5752 17 5753 1 to 10pF 18 5800 0.35 to 3.5pF >9 250 0.3 - 3 >10000 5801 16 5802 17 5850 0.5 to 5pF >12 250 0.3 - 3 >7500 5851 16 5852 17 5853 0.6 to 5pF 18 8050 0.7 to 6pF >7 250 0.4 - 4 >10000 8051 0.6 to 3.5pF >10 0.3 - 3 8052 1 to 10pF >6 1 - 5 >5000 8053 1.5 to 14pF >6 >3000 8054 1.5 to 20pF >12 >1500 8090 1 to 10pF >6 250 1 - 5 >2000 18 8091 1.5 to 14pF8092 8093

www.knowlescapacitors.com P Lead Style F Lead Style T Lead Style J Lead Style T Lead Style with L option Extended Metal Shaft B Lead Style M Lead Style C Lead Style D Lead Style E Lead Style Insulated Bushing Insert “I” in Part Number, i.e. AIT10L Air/PTFE Trimmers - Lead Styles Note: All bushing threads are .234” -64 a Knowles Precision Devices brand TM

www.knowlescapacitors.com Air Trimmers - A Series The only internally sealed Air Trimmer Voltronics’ concentric ring Air Trimmer capacitors are designed for use at frequencies up to 1.5 GHz. They are ideal for applications such as mobile radios, aerospace communication, crystal oscillators and filters, radar, cable TV and innumberable other commercial and military programs. The unique internal O-ring seal make wave soldering and vapor degreasing possible without the need to attach a separate cap. “A” Series - Solder sealed and qualified to MIL-C-14409. Other features include:  Ten full linear turns  Internal stops  Extreme stability under shock and vibration  Screw head does not move in and out  Extended shaft option of metal or plastic  Long life with no dynamic tuning noise Note: All parts shown here can be ordered as non-magnetic: Add “NM” to Part Number, i.e., NMAP10 General Specifications A_5 A_10 A_14 Capacitance Range 1.0 - 5pF 1.0 - 10pF 1.0 - 14pF Q (min) at 100MHz @ Max. C* 5,000 5,000 3,000 DC Working Voltage 250 250 125 DC Withstanding Voltage 500 500 250 Temperature Coefficent 50±50 ppm/˚C / -50±50 ppm/˚C 50±50 ppm/˚C / -50±50 ppm/˚C 50±50 ppm/˚C / -50±50 ppm/˚C Insulation Resistance @ 25˚C 106 MΩ 106 MΩ 106 MΩ Seal 40 pounds/in2 40 pounds/in2 40 pounds/in2 Operating Temperature - 65˚C to +125˚C - 65˚C to +125˚C - 65˚C to +125˚C Rotational Life 10000 Turns 10000 Turns 10000 Turns Vibration 50g at 10 - 2000 Hz 50g at 10 - 2000 Hz 50g at 10 - 2000 Hz * Self-resonant frequency and Q are assured with no terminals on parts. A1 J 8 HV Refer to page 14 OPTIONSSERIES CAPACITANCELEAD STYLE CONTACT ARMS FOR SHORT RF CURRENT PATHNON-ROTATING MOVEABLE ELECTRODE PERMANENT O-RING SEAL PTFE SPACER FOR POSITIVE GUIDANCE 0.50” (12.7) 0.30” (7.62) a Knowles Precision Devices brand TM

www.knowlescapacitors.com Part Number Cap Range (pF) Min. Q @ Fig. A B C D E F G (UNS-2A) .150 0.22 0.06 - 0.03 .120-80 2 .215 - 0.06 0.32 0.16 .190-64 1 .215 - 0.06 0.32 0.16 .190-64 1 Dimensions (inches) Part Number Cap Range (pF) Min. Q @ Fig. A B C D E F (UNS-2A) .215 0.25 0.06 - .190-64 4 5201 5751 0.8 to 10.0 >5000 >7500 0.32 0.29 0.19 0.22 .295 .275 .235 .215 0.31 0.25 0.08 0.06 - .234-64 .190-64 4 .290 0.50 0.08 - .234-64 4 .215 0.31 0.08 - .234-64 4 .275 0.50 0.08 - .234-64 4 .275 0.50 0.08 - .234-64 3 Dimensions (inches) Figure 2 Figure 3 Figure 4 Figure 1 Air Trimmers Note: All Air Trimmers are available with or without hardware. Hardware may be purchased separateley.

www.knowlescapacitors.com Part Number Cap Range (pF) Min. Q @ Fig. A B C D E F G (UNS-2A) 5800 .150 - 0.06 0.125 0.08 0.045 .120-80 1 5850 .150 - 0.06 0.125 0.08 0.045 .120-80 1 .215 - 0.06 0.08 0.06 .190-64 2 .215 - 0.06 0.08 0.06 .190-64 2 Dimensions (inches) Part Number Cap Range (pF) Min. Q @ Fig. A B C D E F G (UNS-2A) 5200 5202 0.8 to 10.0 >5000 0.30 0.29 0.21 .295 .275 0.35 - 0.08 - 0.06 0.09 .234-64 3 5400 5402 1.0 to 14.0 >3000 0.30 0.29 0.21 .295 .275 0.35 - 0.08 - 0.06 0.09 .234-64 3 5500 .275 0.35 - 0.08 - 0.06 0.09 .234-64 3 5600 .275 0.35 - 0.08 - 0.06 0.09 .234-64 3 Dimensions (inches) Figure 1 Figure 2 Figure 3 Figure 4 Air Trimmers Note: All Air Trimmers are available with or without hardware. Hardware may be purchased separateley.

www.knowlescapacitors.com Part Number Cap Range (pF) Min. Q @ Fig. A B C D E F G (UNS-2A) .150 0.02 0.30 .120-80 5 .150 0.02 0.30 .120-80 5 .215 0.03 0.40 .190-64 5 .215 0.03 0.40 .190-64 6 .275 0.04 0.62 .234-64 5 .275 0.25 0.32 .234-64 3 .275 0.24 0.62 .234-64 5 .275 0.25 - .234-64 4 .275 0.25 0.62 .234-64 1 .275 0.25 0.32 .234-64 2 .275 0.03 0.62 .234-64 6 .275 0.04 0.62 .234-64 5 Dimensions (inches) Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Air Trimmers Note: All Air Trimmers are available with or without hardware. Hardware may be purchased separateley.

www.knowlescapacitors.com Tuning Tools Trimmer Series Diameter Johanson Part Number 5200 5300 5400 5500 5600 5700 .130 8777 8764 5800 .078 8777 JMC 8764 JMC 8777 JMC 8777 5000 4000 3000 2000 1000 100 150 200 250 300 Q Frequency (MHz) 5200 5400 5500 5600 Typical Performance Curves 5200/5400/5500/5600 Series 10000 8000 6000 4000 2000 100 150 200 250 300 Typical Performance Curves 5700/5800 Series Q Frequency (MHz) 5800 5700  RF amplifiers and oscillators  Impedance matching  Interstage coupling  Filter tuning  Crystal trimming Air Dielectric Variable Trimmers

Description

 Concentric tubular design  Torque mechanism insures low ESR and low dynamic noise resulting in high Q  Available in PC, panel mount, vertical mount and surface mount terminations  High Reliability testing available Characteristics  Rated voltage: 250 VDC (5300 series 500 VDC)  Insulation resistance: >106 MΩ @ 500 VDC  Contact resistance: <.01 Ω  Operating temperature: -65°C to +125°C  Vibration: 60g, 10-2000 Hz  Shock: 1500g, .5 milliseconds  574°F solder used in construction Note: The use of a Johanson tuning tool is recommended. Improper screwdriver size will cause internal thread damage.

www.knowlescapacitors.com Part Number Cap Range (pF) Min. Q @ Fig. A B C D E F G (UNS-2A) 5760 5761 5762 0.6 to 6.0 >10000 0.27 0.29 0.27 0.21 0.19 0.21 .235 .215 0.22 0.06 0.04 0.06 .190-64 5240 5241 5242 0.8 to 10.0 >4000 0.30 0.32 0.29 0.21 0.19 0.21 .295 .275 0.35 0.31 0.08 0.06 0.09 .234-64 5640 5641 5642 1.0 to 30.0 >800 0.68 0.76 0.68 0.25 0.16 0.25 .295 .275 0.35 0.50 0.08 0.06 0.09 .234-64 Dimensions (inches) JMC 8777 Non-Magnetic Air Trimmers Figure 2 Figure 1 Figure 3 Figure 4 * 5862 & 5762 are supplied with a round nut instead of a hexagon. Figure 5  Non-Magnetic construction  High stability and Q  250 VDC working voltage  Utilizes self-locking constant torque drive mechanism Recommended Tuning Tool Note: All Air Trimmers are available with or without hardware. Hardware may be purchased separateley.

www.knowlescapacitors.com PTFE Trimmers - A1 Series The Voltronics A1 Series of high reliability solid dielectric trimmer capacitors is an ideal economical replacement for conventional miniature air and sapphire dielectric trimmers and assures no intermittent noiseless performance. High reliability solid dielectric, positive tuning stops and up to 13 full turns of linear tuning make the A1 Series an outstanding performer: 40 psi sealed, high voltage and non-magnetic versions are readily available. A1 J 8 HV OPTIONSSERIES CAPACITANCELEAD STYLE Options The “HV” Option - high voltage applications: Add “HV” to the part number, i.e., A1T4HV. Specifications are as follows: Capacitance DC Volts Working DC Volts Withstanding 4pF 1,000 2,000 8pF 500 1,000 11pF 500 1,000 Non-Magnetic Option: Most parts shown can be ordered as non-magnetic. Add “NM” to the part number, i.e., NMA1J8. Sealed Option: All parts shown can be ordered as 40 psi sealed. Add “S” to the part number, i.e., A1M4S. Tape & Reel Options: Consult Factory - M & J style only Recommended Tuning Tool: TT-400 General Specifications A1_4 A1_8 A1_12 Capacitance Range 0.5 to 4pF 0.5 to 8pF 0.6 to 11pF DC Working Voltage 250 125 125 DC Withstanding Voltage 500 250 250 Self-Resonant Frequency* 2.3 GHz at 4pF

1.7 GHz at

1.2 GHz at

Q (min) at 100 MHz @ Max. C* 4000 3000 2000 Temperature Coefficient 0±50 ppm/˚C 0±100 ppm/˚C 0±150 ppm/˚C Insulation Resistance @ 25˚ C 106 MΩ Operating Temperature -65˚C to +125˚C Tuning Torque 0.3 to 1.0 in - oz Shock 1,500g, 0.5 millisecs. Vibration 50g at 10 - 2000 Hz * Self-resonant frequency and Q are assured with no terminals on parts. 0.40” (10.16) 0.155” (3.94) Actual size a Knowles Precision Devices brand TM

www.knowlescapacitors.com Miniature PTFE Trimmers - A4 Series General Specifications A4_3 A4_5 Capacitance 0.45 to 3pF 0.6 to 5pF DC Working Voltage 125 125 DC Withstanding Voltage 250 250 Self-Resonant Frequency* 3 GHz at 3pF 1.8 GHz at 5pF Number of Turns 4 5 Q (min) at 100 MHz @ Max. C* 3000 2000 Temperature Coefficent 0±100 ppm/˚C 0±300 ppm/˚C Insulation Resistance @ 25˚ C 106 MΩ Operating Temperature -65˚C to +125˚C Tuning Torque 0.3 to 1.0 in - oz Shock 1,500g, 0.5 millisecs. Vibration 50g at 10 - 2000 Hz * Self-resonant frequency and Q are assured with no terminals on parts. The Voltronics A4 Series unique design using minimal parts simplifies the manufacturing process to effect one of the most economical high performance trimmer capacitors available in the industry. The Voltronics A4 Series also features a high reliability solid dielectric, positive tuning stops and up to 5 full turns of linear tuning in the shortest length of any similar trimmer capacitor. The Voltronics A4 is an ideal choice for tuning and impedance matching, high frequency and high power amplifier circuits. A1 J 8 HV OPTIONSSERIES CAPACITANCELEAD STYLE Options The “HV” Option - high voltage applications: Add “HV” to the part number, i.e., A1T4HV. Specifications are as follows: Part No. DC Volts Working DC Volts Withstanding A4_3 HV 500 1,000 A4_5 HV 500 1,000 Non-Magnetic Option - All parts can be ordered as non-magnetic. Add “NM” to the part number, i.e. NMA4J3 Tape and Reel Options: Consult Factory - M style only SD Option - For applications requiring high reliability but lower voltage Part No. Working Voltage Withstanding Voltage K_1SD 250 500 A or K_4SD 250 500 A_25SD 125 250 A_30* 250 500 A_40SD 250 500 A_55SD 125 250 Note: A_30 not available in high voltage configuration U.S Patent No. 5,229,911 0.225” (5.72)0.155” (3.94) Actual size a Knowles Precision Devices brand TM

www.knowlescapacitors.com HV PTFE Trimmers - A_HV Series The only internally sealed High Voltage PTFE trimmer Voltronics’ concentric ring PTFE dielectric trimmer capacitors are designed for use at frequencies up to 1.5 GHz. They are ideal for HIGH VOLTAGE applications. The solid internal PTFE dielectric prevents ionization, a major advantage in space, high altitude and high voltage applications. The unique internal O-ring seal makes wave soldering and vapor degreasing possible without the need to attach a separate cap. Options Non-Magnetic Option: All parts can be ordered as non-magnetic. Add “NM” to the part number, i.e. NMAT25HV, NMKP10HV. Extended Shaft Options: Add “E” to the part number, i.e. AT10HVE. Extended Plastic Shaft Options: Add “EI” to the part number, i.e. EF10HVEI. SD Option: For applications requiring high reliability but lower voltage. Part No. Working Voltage Withstanding Voltage K_1SD 250 500 A or K_4SD 250 500 A_25SD 125 250 A_30* 250 500 A_40SD 250 500 A_55SD 125 250 Note: A_30 not available in high voltage configuration U.S. Patent No. 5,229,911 A1 J 8 HV Refer to page 14 OPTIONSSERIES CAPACITANCELEAD STYLE General specifications A_4HV A_10 HV A_15 HV A_25 HV Capacitance Range 1 to 4pF 1 to 10pF 1 to 16pF 1 to 23pF DC Working 1000 1000 1000 750 DC Withstanding 2000 2000 2000 1500 Q (min) at 100MHz @ Max. C* 2000 2000 2000 2000 Temperature Coefficent - 0±100ppm/˚C -50±50 ppm/˚C -50±50 ppm/˚C 50±50 ppm/˚C -50±50 ppm/˚C Insulation Resistance @ 25˚C 106 MΩ 106 MΩ 106 MΩ 106 MΩ Seal 40 pounds/in2 40 pounds/in2 40 pounds/in2 40 pounds/in2 Operating Temperature -65˚C to +125˚C -65˚C to +125˚C -65˚C to +125˚C -65˚C to +125˚C Rotational Life 600 Turns 600 Turns 600 Turns 600 Turns Vibration 50g at 10-2000 Hz 50g at 10-2000 Hz 50g at 10-2000 Hz 50g at 10-2000 Hz * Self-resonant frequency and Q are assured with no terminals on parts. Other features include:  Ten or 29 linear turns  Internal stops  Extreme stability under shock & vibration  Screw head does not move in and out  Extended shaft option of metal or plastic  Long life with no dynamic tuning noise General specifications A_40HV A_55HV Capacitance Range 1.5 to 40pF 1.5 to 55pF Q (min) at 100MHz @ Max. C* 2000 - Q (min) at 75MHz @ Max. C* - 780 Temperature Coefficent 0±100 ppm/˚C 0±100 ppm/˚C Insulation Resistance @ 25˚C 106 MΩ 106 MΩ Seal 40 pounds/in2 40 pounds/in2 Operating Temperature -65˚C to +125˚C -65˚C to +125˚C Rotational Life 600 Turns 600 Turns Tuning Torque .05 to 5.0 in-oz .05 to 5.0 in-oz Shock 1,500g, 0.5 millisecs. 1,500g, 0.5 millisecs. Vibration 50g at 10-2000 Hz 50g at 10-2000 Hz DC Working Voltage 1000 600 DC Withstanding Voltage 2000 1200 * Self-resonant frequency and Q are assured with no terminals on parts. Extended metal shaft option: Add “E” to Part Number, i.e., AT40SDE Extended Range CONTACT ARMS FOR SHORT RF CURRENT PATHNON-ROTATING MOVEABLE ELECTRODE PERMANENT O-RING SEAL PTFE SPACER FOR POSITIVE GUIDANCE a Knowles Precision Devices brand TM 1.55” (39.4) 0.30” (7.2) 0.50” (12.7) 0.30” (7.62)

www.knowlescapacitors.com Very High Voltage PTFE Trimmers General Specifications A_10-4 A_20-4 Capacitance Range 0.8 to 10pF 0.8 to 20pF DC Working Voltage 2000 2000 DC Withstanding Voltage 4000 4000 Self-Resonant Frequency* 4.25 GHz at 2pF 3 GHz at 3pF Q (min) at 100 MHz © Max. C* 3000 3000 Temperature Coefficient 0±100 ppm/°C 0±100 ppm/°C Insulation Resistance @ 25°C 106 MΩ 106 MΩ Operating Temperature -65°C to +125°C -65°C to +125°C Tuning Torque 0.5 to 5.0 in-oz 0.5 to 5.0 in-oz Shock 1500g, 0.5 millisecs. 1500g, 0.5 millisecs. Vibration 50g at 10-2000 Hz 50g at 10-2000 Hz Drawing Tolerances where not specified XXX ± .005 XX ± .016 XXX ± .005 XX ± .016 A1 J 8 HV P, J & T Lead Styles Refer to page 14 OPTIONSSERIES CAPACITANCELEAD STYLE Options: Extended metal shaft. Add ‘E’ to the part number i.e. AT10-4E Note: For Non-Magnetic parts add ‘NM’ to part number, i.e. NMAT10-4 AJ .56 .30 .015 .44 .16 .14.14 .18 .85 .29 .18 AP .56. 44 .12 .020 .31 .031.015 .22 .22 .11.56 .036 .30 AT .13. 53 .45 .28 .30 .09 .06 .234-64TH’D Dimensions .34 .05 .110 0.20 a Knowles Precision Devices brand TM This range of Voltronics trimmer capacitors provides a further extention in voltage rating to the HV range. Working voltage is 2kV and dielectric withstand voltage is 4kV. The solid internal PTFE dielectric prevents ionization, a major advantage in space, high altitude and high voltage applications. The unique internal O-ring seal makes wave soldering and vapor degreasing possible without the need to attach a separate cap.

www.knowlescapacitors.com Non-Magnetic PTFE Trimmers - NMNT Series 4kV to 10kV Voltronics NMNT Series of PTFE trimmers are designed for applications requiring greater capacitance and voltage ratings than the popular smaller trimmers but without the large size and expense of vacuum capacitors. Part Number DC Working Voltage DC Withstanding Voltage Capacitance (pF) < Capacitance (pF) > “A” Dim ±.06 “B” Dim ±.06 NMNT2-20 10000 20000 1.0 2.0 1.205 1.125 NMNT5-8 4000 8000 1.0 5.0 1.13 0.31 NMNT5-18 8750 17500 1.0 5.0 2.0 0.75 NMNT10-6 3000 6000 1.0 10.0 1.15 0.38 NMNT10-12 6000 12000 2.0 10.0 1.83 .063 NMNT15 2000 4000 1.0 15.0 1.69 0.31 NMNT23-6 3000 6000 3.0 23.0 1.70 0.38 NMNT23-12 6000 12000 3.0 23.0 1.845 0.63 NMNT25-6 3000 6000 5.0 25.0 1.62 .063 NMNT25-15 7500 15000 7.0 25.0 1.77 1.13 NMNT30 3000 6000 4.0 30.0 2.25 1.50 NMNT50 4500 9000 5.0 50.0 2.25 1.50 NMNT70-6 3000 6000 2.5 70.0 3.00 0.70 NMNT70-15 7500 15000 6.5 70.0 3.25 1.63 NMNT85 3000 6000 5.0 85.0 3.25 1.50 NMNT100-4 2500 3600 2.0 95.0 4.25 0.31 The NMNT Series offers:  High voltage  Non-rotating piston, long life and no tuning noise  Extremely stable under shock and vibration  Screw head does not move in and out Proven RF performance and power handling these high performance trimmer capacitors are utilized in MRI body coils, NMR equipment and RF power transfer applications. Note: Preferred parts. Others available but may be subject to an increased MOQ. Dimensions NMNT Series NUT AND LOCKWASHER “B” DIA #20 AWG .25-32 TH’D .08 .250“A” .475* .02 .225 .12 DIA * Extended shaft versions only. a Knowles Precision Devices brand TM

www.knowlescapacitors.com Part Number Cap Range (pF) Min. Q @

175 MHz

Fig. A B C D E F G 52H01 .275 0.31 - - - 0.06 0.09 .275 0.31 - - - 1 .275 - - 0.06 0.09 2 .275 0.32 - 0.125 - 2 Notes: Dimensions (inches). *Q @ 195MHz. High Voltage Trimmers Characteristics  Rated voltage:

1250 VDC - test voltage 2500 VDC (52H02)

1000 VDC - test voltage 2000 VDC (55H01) (55H02) (80H85)

 Q >1400@ 195 MHz (52H02)  Q >1000@ 175 MHz (55H01) (55H02) (80H85)  Insulation resistance: >106 MΩ  Operating temperature range: -65°C to +125°C  Torque: 1 to 10 oz. in.  Contact resistance: <.01 Ω Figure 1 Figure 2 Figure 3 Recommended Tuning Tool JMC 8764

www.knowlescapacitors.com Giga-Trim® Trimmers -  Sapphire dielectric  Ceramic dielectric  Zirconia High K dielectric  High Q  500 VDC working voltage  Select part numbers available on tape and reel  Utilizes the same constant torque drive mechanism as Johanson air capacitors and tuning elements Characteristics  Rated voltage: 500 VDC  Insulation resistance: >106 MΩ @ 500 VDC  Rotational life exceeds Mil-C-14409  Contact resistance: <.01 V  Operating temperature: -65°C to +125°C  Self resonant frequency: >12 GHz  Vibration: 60g, 10-2000 Hz  Shock: 100g, 6 milliseconds  Impedance matching  Crystal trimming  Interstage coupling  Base station amplifier Seal Caps Type Part No. Cap type Material

17273 P4446-2 “Poke-Thru”

Seal Cap Teflon®

27260 Thru 27265 P4445-1 Standard

Seal Cap Teflon®

27270 Thru 27295 P4445 Standard

Seal Cap Teflon®

27260 Thru 27265 P4446-1 “Poke-Thru”

Seal Cap Teflon®

27270 Thru 27295 P4446 “Poke-Thru”

Seal Cap Teflon®

47273 Thru 47285 P4446-2 “Poke-Thru”

Seal Cap Teflon®

57263 P4446-1 “Poke-Thru”

Seal Cap Teflon® Note: The use of a Johanson tuning tool is recommended. Improper screwdriver size will cause internal thread damage. JMC 8762 JMC Drive Tuning Tool 8762 JMC Drive Tuning Tool 8766 JMC 8766 Q Frequency (MHz) 10000 1000 100 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 27260 27270 27280 27290 Set at Max. capacitance

www.knowlescapacitors.com Giga-Trim® Trimmers - Selection Guide Part No. Capacitance Range (pF) Number of Turns Working Voltage (VDC) Dielectric Tuning Torque (oz in) Q @ 250 MHz Page Number 17273 0.6 to 4.5 >8 500 Alumina 0.2 to 2 >2000 31 27261 0.3 to 1.2 >5 500 Sapphire 0.1 to 1 >5000 27261SL 27263 3127264 27265 27271 0.6 to 4.5 500 Sapphire 0.2 to 2 >3000 27271SL 27273 3127274 27275 27281 0.4 to 2.5 500 Sapphire 0.2 to 2 >4000 27281S L 27283 3127284 27285 27291 0.8 to 8.0 >16 500 Sapphire 0.2 to 2 >*3000 27291SL 27293 3127294 27295 47273 0.6 to 4.5 >8 500 Alumina 0.2 to 2 >3000 3147473 2.0 to 6.0 >6 >1500 47483 0.3 to 2.3 >4 >2000 47285-3 0.4 to 2.5 >4 >**3000 32 57273 0.8 to 8.0 >8 500 Zirconia 0.2 to 2 >*2000 32 57285-3 0.8 to 4.5 >4 >**1000 32 Part No. Units/Reel Carrier Tape 27273-3R5 400 24mm 27283-3R10 750 16mm 47275-1R11 500 32mm 47273-11R5 400 24mm 47273R5 400 24mm 47483R10 750 16mm 572733R5 400 24mm

www.knowlescapacitors.com The V9000 trimmer capacitor is a unique design: truly sub miniature at just 0.64” (16.3mm) in length but offers the highest working voltage rating of 2kV and capacitance value, up to 12pF, available in its size. Using a Sapphire dielectric, for its ideal dielectric constant, it is extremely stable, is chemically inert, moisture resistant and mechanically strong. Recently launched, additional features are still under development, contact Voltronics for our usual custom modifications and adaptations. Non-Magnetic Sapphire Trimmer - V9000 A A .14 ±.03.21 at min. cap 2x .0102x .12 .47 .020 Ø .25 .188 .15 .25 .08 General specifications Capacitance Range 1.0pF to 12.0pF Typical DC Working Voltage @ 12.0pF 2000V DC Withstanding Voltage @ 12.0pF 3000V Q Factor @ 100 MHz & 12.0 pF 3000 Min Insulation Resistance 105 MΩ @ 25°C Temperature Coefficient 500 ± 200 ppm/°C Mechanical specifications Tuning Torque 0.5 in oz to 3.0 in oz Rotational Life 600 Turns Min Construction Non-Magnetic Environmental Operating Temperature -55°C to +125°C RoHS Compliant Dimensions Part No. DC Working Voltage DC Withstanding Voltage Capacitance (pF) < Capacitance (pF) > V9000 2000V 3000V 1 12 Solder pad layout 2X .220 2X .160 .210 V9000 cutaway a Knowles Precision Devices brand TM

www.knowlescapacitors.com Glass and Quartz Trimmers - Specifications Design Features The unique Voltronics non-rotating precision trimmer capacitor design offers the following advantages over conventional rotating types:  Linear tuning with no reversals  A true high frequency device with high Q’s, low RF losses, low constant inductance and high self-resonant frequencies  A superior seal because the screw head and O-ring do not move in and out  Greater life - 10,000 cycles minimum  Much smaller sealed MIL sizes  Ability to provide extended metal or plastic shafts General Specifications (where not specified on detail pages) Dielectric The dielectric is a tube which has been precision drawn in a vacuum so that its inner diameter is held within ±0.0002”. The choices are: 1. Annular Band Glass: A solid tube of a specially selected formulation of glass which is metallized on the outside. 2. Embedded Band Glass: Two tubes of glass fired together with a metallized silver band embedded between them. The inner tube is only 0.005” thick to provide much higher capacitance values. 3. Quartz: A pure-grade silicon oxide offering higher Q and voltage ratings in each size with the trade-off of lower capacitance and higher cost. Piston Action Non-rotating. Blind Hole Tuning Screw head does not move in and out. Linearity ± 1% with no capacitance reversals. Resolution #2-72 tuning screw for fine tuning - approximate pico-farads per turn in active tuning range: 1. Annular band glass 0.6 to 0.8 2. Embedded band glass 2.3 to 3.0 3. Quartz 0.3 to 0.36 4. “H” Series high range glass 3.9 to 4.2 Insulation Resistance Annular band glass and quartz:

106 MΩ at 25°C to 125°C

Embedded band glass:

6 MΩ at 25°C

105 MΩ at 125°C

1 to 8 inch ounces. Life Over 10,000 cycles. Temperature Coefficient Annular Band Glass: ±50 ppm/°C Embedded Band Glass: ±150 ppm/°C Quartz: 0 to +50 ppm/°C Dielectric Withstanding Voltage Twice DC working voltage (listed with each part). Capacitance Tuning Range From below minimum to above maximum value listed for each part. Capacitance measured at 1 MHz on Boonton Electronics 7600 bridge using Voltronics V1265 guarded test jig. AM measurements taken with leads perpendicular to unit regardless of final configuration. Temperature Range All glass dielectrics: -55°C to 125°C Quartz dielectric: -55°C to 150°C Other Specifications All other specifications including vibration, shock, moisture and seal (where applicable) per MIL-C-14409D. Drawing Tolerances (where not specified) Decimal: XXX ±.016” XX ±.03” Quality Factor Recommended Tuning Tools: TT-100 or TT-600 % of Q at 1MHz % of Q at 1MHz Frequency (MHz) 200 100 40 60 80 100 120 200 100 40 60 80 100 120 Frequency (MHz) ANNUALAR BAND CAPACITORS EMBEDDED BAND CAPACITORS 4.5 - 12pF 18pF 30pF 10 - 16pF 28 - 36pF 60 - 75pF 90 - 120pF a Knowles Precision Devices brand TM

www.knowlescapacitors.com The PC17 styles are the only vertically mounted glass trimmers in MIL-C-14409D. Voltronics “S” Series are up to 40% shorter with 25% more range than any other sealed standard glass RC. trimmers. The use of Voltronics’ unique non-rotating piston design provides linear tuning, high “Q”, long life, and high self-resonant frequencies. The O-ring seal assures protection up to 40 p.s.i. against dust, moisture, flux, solder, and cleaning solvents. .125 DIA .067 .020 .31 DIA X .125 Y .28 .070 .030 .010+ “Y” .020 .125 DIA .067 .020 X .34 DIA .28 .020 .025 .26 .065 .11 .31 DIA Smallest Sealed Glass Trimmers - S Series Dielectric Capacitance Range (pF) Q (Min.) at 1 MHz Horizontal Mount Figure 1 Vertical Mount* Figure 2 Surface Mount Figure 3 From Below To Above Type A ± .06 B ± .03 Type X ± .03 Type X ± .03 EMBEDDED BAND GLASS *SF styles available with dual leads from top similar to AF styles on page 14. General specifications on page 34 apply except: 1. DC Working Voltage: 250 2. Tuning torque: 0.5 to 5 inch ounces 3. Tolerance: XXX ± .005 A. 31 DIA .020 .125 DIA .031 .218B .31 .015 .218 #64 (.036 DIA)

4 HOLES

a Knowles Precision Devices brand TM

www.knowlescapacitors.com Extended Range Glass Trimmers - H Series The “H” Series increases the standard maximum capacitance values of Voltronics’ glass trimmer capacitors by almost 100%. This is achieved by a new and unique technique which makes the wall of the inner glass tube thinner than was previously possible. General specifications for the “H” Series are the same as those of stan¬dard embedded band glass trimmers (see Page 34) with the following exceptions: DC Working Voltage: 125 Temperature Coefficient: -150 ±150 ppm/°C Figure 1 A. 31 DIA .020 .125 DIA .031 .22B .31 .015 .22 #64 (.036 DIA) A .12 MAX .16 DIA.31 DIA #20 AWG B .020 .125 DIA 1” MIN .31 DIA .040 .067 .020 A .125 .020 .070.28 .050 DIA .030 .125 DIA Figure 4 A .28 .020 .025 .31 DIA .067 .020 .11 .065 .26 .34 DIA .125 DIA Figure 5 .020 .125 DIA.25A .31 DIA #10-32 TH’D .195 .191 .175 .171 a Knowles Precision Devices brand TM Type Capacitance Range (pF) Q (Min.) at 1 MHz Fig. A ± .06 B ± .03 From Below To Above Horizontal Printed Circuit HSP19 2 19 1000 0.37 0.3 HSP34 2 34 900 0.44 0.37 HSP46 2 46 800 0.52 0.45 HSP64 2 64 700 0.63 0.56 HTP96C 2 96 600 0.91 0.88 HTP130C 2 130 500 1.16 1.13 HTP210C 2 210 350 1.75 1.73 HTP250C 2 250 250 1.98 1.95 Vertical Printed Circuit A ± .03 HSF19 2 19 1000 0.34 HSF34 2 34 900 0.41 HSF46 2 46 800 0.49 HSF64 2 64 700 0.6 Surface Mount HSM19 2 19 1000 0.34 HSM34 2 34 900 0.41 HSM46 2 46 800 0.49 HSM64 2 64 700 0.6 Panel Mount HTM19C 2 19 1000 0.37 HTM34C 2 34 900 0.45 HTM46C 2 46 800 0.52 HTM64C 2 64 700 0.63 HTM96C 2 96 600 0.92 HTM130C 2 130 500 1.17 HTM210C 2 210 350 1.77 HTM250C 2 250 250 2

www.knowlescapacitors.com *1.25 in. on TF12, 17, 28 and 36 styles. “Y” DIA: Standard units are .040. For different diameter pins substitute “B” .063 or “C” - .093 for “A” in type number. Alternate design with Ribbon Lead (add R to Type No.) .067 .020 .030 .070 .28 .010+ “Y” DIA Vertical PC Mount Glass Trimmers - TF Series Type Capacitance Range (pF) X ± .03 Q (Min.) at 1 MHz DCWV From Below To Above Annular Band TF5A 0.8 4.5 0.47 650 750 TF6A 0.8 5.5 0.47 700 750 TF8A 1 8.5 0.62 700 750 TF9A 0.8 8.5 0.7 650 750 TF11A 1 11 0.7 700 750 TF12A 0.8 12 0.9 650 750 TF17A 0.8 16 0.9 700 750 Embedded Band TF10A 1.2 10 0.43 800 500 TF14A 1.5 14 0.53 700 1000 TF15A 1.2 16 0.48 800 500 TF16A 1 16 0.53 800 1000 TF22A 2 22 0.58 800 500 TF25A 2 25 0.58 800 500 TF28A 1 28 0.77 700 1000 TF36A 1 36 0.77 800 1000 General specifications on Page 34 1” MIN* #64 (.036 DIA)

2 HOLES

#2-72 TH’D .28 .010+ “Y” DIA “Y” DIA .31 DIA .13 X .13 .16 DIA #20 AWG .020 .125 DIA ADJUSTMENT CAVITY a Knowles Precision Devices brand TM

www.knowlescapacitors.com Panel Mount Trimmers - TM & QM Series Fig. 1 Fig. 2 Fig. 3 Fig. 4 .125 ± .005 ADJUSTMENT CAVITY A .020 ± .005 #10-32 TH'D NUT & LOCKWASHER .31 DIA .25 SEE NOTE 3 C DIA #2-72 TH'D .175.171 .195 .191 NOTE 2 A .31 DIA A .25 DIA NOTE 2 A #22 AWG 1” MIN .31 DIA Notes: 1. Fig. 2, 3 and 4 parts have same end view as Fig. 1. 2. All leads #22 AWG and 2” Min. long except for all TM5-, TM6-, TM1O- and QM2- parts which are #24 AWG. 3. Mounting bushing #10-32 x .25 long except for all TM10- and TM15- parts which are #10-32 x .16 long. Detailed General Specifications on Page 34. Optional configurations .020 ± .005.160 DIA .45 .045 Add “EI” to End of Type Number (eg. TM9EI) .020 ± .005.12 DIA .040 .50 Add “E” to End of Type Number (eg. TM9CE) .020 ± .005 .125 ± .005 ADJUSTMENT CAVITY .08 NUT & LOCKWASHER Insert “I” Between “T” and “M” in Type Number (eg. TIM9C) .38 .09 .25 30° .31 .25 -32 TH’D NYLON INSULATOR .234.230 .255 .251 EXTENDED METAL SHAFT INSULATED BUSHING EXTENDED PLASTIC SHAFT a Knowles Precision Devices brand TM These ranges are panel mount versions of Voltronics’ glass and quartz dielectric trimmers. Available sealed or unsealed in Annular Band Glass, Embedded Band Glass and Quartz, the capacitance values are significant, up to 180pF max with 178pF of tunable range. All three dielectric options are also available in MIL Std versions featuring PC38, PC39 and PC48 designations.

www.knowlescapacitors.com Glass Annular Band Capacitance Range (pF) Q (Min.) UNSEALED

750 DCWV

(Fig. 1) SEALED, METAL CAP, TURRET TERMINAL 750 DCWV (Fig. 2) SEALED, GLASS END 1,250 DCWV (Fig. 3) From below To above 1 MHz A±.03 Type MIL Designation A±.03 Type A±.03 Type MIL Designation 0.8 21.0 700 1.13 TM21 — 1.22 TM21C — — — Glass Embedded Band Capacitance Range (pF) Q (Min.) UNSEALED 1,000 DCWV (Fig. 1) SEALED, METAL CAP, TURRET TERMINAL 1,000 DCWV (Fig. 2) SEALED, METAL CAP, 1,000 DCWV (Fig. 4) From below To above 1 MHz A±.016 Type A±.03 Type MIL Designation A±.03 Type Quartz Capacitance Range (pF) Q (Min.) UNSEALED (Fig. 1) SEALED, QUARTZ END 1,250 DCWV (Fig. 3) From below To above 1 MHz A±.03 Type MIL Designation A±.03 Type MIL Designation 0.6 1.8 2000 .30 QM2 PC40Q1R8 .36 QM2G PC38Q1R8 0.8 5.5 2000 .55 QM6 P040Q5R5 .63 QM6G PC38Q5R5 0.6 9.5 2000 .98 QM10 PC40Q9R5 1.06 QM10G PC38Q9R5 0.8 16.0 2000 1.59 QM16 PC40Q160 1.66 QM16G PC38Q160 *Parts Rated 500 DCWV **MIL-C-14409B parts not listed in MIL-C-14409D Panel Mount Trimmers - TM & QM Series a Knowles Precision Devices brand TM

www.knowlescapacitors.com A .12 .16 DIA 1” MIN .020 ± .005 .125 ± .005 DIA ADJUSTMENT CAVITY .31 DIA C DIA #2-72 TH’D #24 AWG #20 AWG B .281 .234 #64 (.036 DIA) A .31 DIA B A B .31 DIA Fig. 1 Fig. 2 A .25 DIA B Fig. 3 Fig. 4 Notes: Fig’s 2 and 3 have mounting dimensions of Fig. 1 2. C diameter of Fig. 1 parts .27 for embedded band and .25 on all other parts. Detailed General Specifications on Page 34. .44 .045 .020.155 DIA Add “EI” to End of Type Number (eg. TP9CEI) .040 .60 .020 ± .005.12 DIA Add “E” to End of Type Number (eg. TP9EI) .020 .31 DIA .69 .14 B .036 .17 #64 (.036 DIA) Add “L” to End of Type Number (eg. TP28L) .08 DIA Optional configurations EXTENDED METAL SHAFT PRINTED CIRCUIT LUG Horizontal Mount Trimmers - TP & QP Series EXTENDED PLASTIC SHAFT a Knowles Precision Devices brand TM a Knowles Precision Devices brand TM These ranges are horizontal mount versions of Voltronics glass and quartz dielectric trimmers. Available sealed or unsealed in Annular Band Glass, Embedded Band Glass and Quartz, the capacitance values are significant, up to 180pF max with 178pF of tunable range. All three dielectric options are also available in MIL Std versions featuring PC42, PC43 and PC52 designations.

www.knowlescapacitors.com Glass Annular Band Capacitance Range (pF) Q (Min.) Unsealed 750 DCWV (Fig. 1) Sealed, Metal Cap (Fig. 2) Sealed, Glass End, 1,250 DCWV Smaller (Fig. 3) Larger MIL Size (Fig. 3) From Below To Above 1 MHz A±.03 B±.03 Type MIL MIL Designation Glass Embedded Band Capacitance Range (pF) Q (Min.) Unsealed 1,000 DCWV (Fig. 1) Sealed, Metal Cap, Turret Terminal 1,000 DCWV (Fig. 4) Sealed, Metal Cap, 1,000 DCWV Larger MIL Size (Fig. 4) From Below To MIL Designation Quartz Capacitance Range (pF) Q (Min.) Unsealed 750 DCWV (Fig. 1) Sealed, Quartz End, 1,250 DCWV Smaller (Fig. 3) Larger MIL Size (Fig. 3) From Below To Above 1 MHz A±.03 B±.03 Type MIL Designation A±.03 B±.03 Type A±.03 B±.06 Type MIL Designation *Parts Rated 500 DCWV **MIL-C-14409B parts not listed in MIL-C-14409D Horizontal Mount Trimmers - TP & QP Series a Knowles Precision Devices brand TM a Knowles Precision Devices brand TM

www.knowlescapacitors.com a Knowles Precision Devices brand TM a Knowles Precision Devices brand TM Differential Glass Trimmers Split Stator Glass Trimmers Fig. Capacitance Range (pF) A B C Min. (1) Min. (2) Max. (1) (2) Typical Crossover Note: For sealed versions, add “G” to part number, ie., TM8DG. The “A” dimension will be 0.11” longer. Fig. Capacitance Range (pF) A BPlate/Plate Plate/Brushing Min. Max. Min. Max. Note: For sealed versions, add “G” to part number, ie., TM4SG. The “A” dimension will be 0.11” longer. For a differential trimmer capacitor, the capacitance of one element increases while the other element decreases, with the sum remaining approximately constant. Both elements of a split stator trimmer tune at approximately the same rate. General Specifications on page 34 apply except: 1. DC Working Voltage: 500 2. Temperature coefficient: 0±100 ppm/°C. Fig. 1 Fig. 2 Fig. 1 Fig. 2 A C .25 DIA C1 C2 .25 .31 DIA .168 .020 .125 DIA .195 .191 .175 .171#10-32 TH’D NUT & LOCKWASHER #22 AWG 2” LONG A .125 .16 DIA.25 DIA C1 C2 #20 AWG 1” MIN .020 .125 DIA .036 DIA (4 HOLES) .235.275 C B 1” A .250 Ø .31 Ø .125 .020 SLOT .195 .191 .175 .171 .167 #10-32 THREAD NUT & LOCKWASHER RIBBON LEAD .125 WIDE x .006 TH’K 1” MIN A .125 .312 DIA .250 DIA .16 DIA #20 AWG B .234 .020 .125 DIA RIBBON LEAD .125 WIDE x .006 TH’K Differential Glass Trimmers

www.knowlescapacitors.com a Knowles Precision Devices brand TM VOLTRONICS 4.50 .100 .190 .88 .88 .115 dia. .012 .036 B A METAL (Fig.1) Part No. Tip A Tip B Capacitor Series TT-100 .110 x .018 .070 x .012 A, E, K, KE, DRO, Glass, NT P TT-200 .110 x .018 .032 x .088 A, E, K, KE, DRO, Glass, NT___ TT-300 .060 x .018 .070 x .012 A1, A3 P TT-400 .060 x .018 .036 x .012 A1, A3, A2, A4 Tuning Tools Ceramic (Fig.2) Part No. Tip A Capacitor Series TT-500 .07X.016 A1, A3, A, E, K, KE, DRO TT-600 .10X.016 Glass, NT TT-700 .050X.016 P TT-900 .038X.016 A2, A4 Notes: The TT-500 thru TT-900 tuning tools are ideal for continual use. They fit into the hand with the rotatable top fixed in the palm. The tips are made of high strength ceramic. Use these tools where metal tips affect tuning. 4.30 ROTATES TO ALLOW FOR EASY TUNING Ø .39 Ø .55 Ø .16 A B VOLTRONICS 4.50.100 .190 .88.88 .115 dia. .012 .036 B A Tuning Tools Fig. 1 Fig. 2

www.knowlescapacitors.com Microwave Tuning Elements  Variable reactance for microwave circuits  Available with mounting bushing and/or individual tuning rotor  High resolution tuning  Exceeds MIL-PRF-14409 vibration requirements

Features

 Self-locking torque mechanism, no lock nuts required  Gold and chromate finish  Available in metallic, dielectric and resistive versions  Combine applications  Interdigital applications  Impedance transformers  Impatt and Gunn oscillators  Microstrip and stripline circuits  Attenuators  Coaxial structures  Waveguide circuitry Contact factory for “Microwave Product Application Guide” brochure. Johanson Microwave Tuning Elements with the self-locking, constant torque drive mechanism, require no external locking devices and permit “one hand” tuning with virtually no dynamic tuning noise which could otherwise imperil associated solid state devices under “power on” conditions. This self-locking feature and high tuning resolutions assure unparalleled control over the most critical of complex circuit tuning adjustments. In many instances, the use of Johanson Tuning Elements has halved technical tuning time. Recommended Tuning Tools Tuning Element Diameter Johanson Part Number Microwave Type .130 8777 Microwave Type .130 8764 JMC 8777 JMC 8764 Note: The use of a Johanson tuning tool is recommended, improper screw driver size will cause internal thread damage. Tap Part No. Thread (UNS-2) Recommended Tap Drill 7059 .156-64 9/64 (.1406) 7060 .120-80 #36 (.1065) 7062 .234-64 7/32 (.2187) 7063 .250-64 15/64 (.2344)

www.knowlescapacitors.com Dielctric Part Number Dimensions Mounting A B C D E F G ROD MAT’L THD. (UNS-2A) Torque (oz. in) Slot 6933-4 0.240 0.168 0.062 0.135 0.035 0.260 0.138 Sapphire 0.120 to 80 10 0.015W x 6934-3 0.360 1.205 0.152 0.265 0.145 1.309 1.175 Alumina 0.234 to 64 50 0.031W x 0.025DP6934-4 1.105 1.209 1.075 6934-5 0.905 1.009 0.875 6934-6 0.360 0.115 0.152 0.265 0.035 0.219 0.085 Sapphire 0.234 to 64 50 0.031W x 6935-11 0.360 0.265 0.152 0.265 0.145 0.369 0.235 Alumina 0.234 to 64 50 0.031W x 0.025DP6935-12 0.525 0.643 0.495 Resistive Part Number Dimensions Mounting A B C D E F G ROD MAT’L THD. (UNS-2A) Torque (oz. in) Slot 6950-2 0.240 0.168 0.062 0.135 0.035 0.260 0.138 Eccosorb 0.120 to 80 10 0.015W x 6952-1 0.360 0.250 0.152 0.265 0.145 0.034 0.220 0.234 to 64 50 0.031W x 0.025DP6952-2 0.185 0.289 0.155 Dielectric Tuning Elements Recommended Tuning Tool Tuning Element Diameter Johanson Part Number Dielctric & Resistive Type .130 8777 JMC 8777 Note: The use of a Johanson tuning tool is recommended, improper screw driver size will cause internal thread damage. C (DIA.) D (DIA.) MOUNTING SLOT MOUNTING THREAD TUNING SLOT F (REF.) G BUSHING HEX. NUT EA B ROTOR SCREW ROD

www.knowlescapacitors.com Metallic Part Number Dimensions Mounting Fig. A B C D E F G THD. (UNS-2A) Torque (oz. in) Slot 6924-9 0.240 0.148 0.072 0.135 0.035 0.240 0.035 W x

0.156 A/F

0.120 to 80 10 0.015 W x 0.020 DP 6924-10 0.120 0.075 0.167 6924-11 0.240 6924-12 0.120 0.030 0.122 6925-4 0.250 0.905 0.125 0.210 0.037 0.250 0.035 W x

0.218 A/F

0.190 to 64 30 0.031 W x 0.020 DP6925-5 0.125 0.115 0.125 6926-13 0.210 0.106 0.160 0.267 0.035 0.210 0.040 W x

0.281 A/F

0.234 to 64 50 0.031 W x 0.025 DP 6926-17 0.180 0.284 6927-2 0.360 0.250 0.265 0.145 0.360 6927-3 0.255 0.374 0.218 A/F 0.190 to 64 10 0.031 W x 0.020 DP 0.562 A/F 0.469 to 32 240 0.031 W x 0.030 DP LC Type Part Number Dimensions Mounting Fig. A B C D E F G THD. (UNS-2A) Torque (oz. in) Slot 6939-2 0.482 0.148 0.072 0.187 0.047 0.240 0.232 0.156 to 64 20

0.030 W x

C (Dia.) D (Dia.) MOUNTING SLOT TUNING SLOT F (REF.) G BUSHING E A B ROTOR SCREW MOUNTING THREAD Fig. 1 Fig. 2 C (Dia.) D (Dia.) MOUNTING SLOT MOUNTING THREAD TUNING SLOT F (REF.) BUSHING G HEX. NUT EA B ROTOR SCREW Recommended Tuning Tool Tuning Element Diameter Johanson Part Number Metallic & LC Type .130 8777 JMC 8777 Note: The use of a Johanson tuning tool is recommended, improper screw driver size will cause internal thread damage.

www.knowlescapacitors.com Tuning Screw Torque Bushings METAL (Fig.1) Part No. A B C D E F Thread Mounting hole (dia.) Posi-torque Bushings are precision devices designed for applications requiring precision, low loss high resolution tuning. The self-locking, constant torque drive mechanism eliminates the need for locking nuts and assures stable, noise free adjustment in RF to Microwave frequencies. Posi-Torque Bushings are universal and can be used with standard SI and US customary screws. THREAD 20º REF Ø C Ø A Ø B +.0005 -.0000 +.000 -.015E D SEE MOUNTING HOLE DIA. F

www.knowlescapacitors.com Tuning Rotors Metallic Part Number Dimensions Mounting Fig. A B C D THD. (UNS-2A) Tap P/N ROD Mat’l Slot L6316-1 1 0.165 0.075 0.072 0.018 0.120 to 80 7060 BRASS 0.015 W x 0.090L6316-2 0.223 0.155 - 0.020 L6994-2 0.175 0.090 - 0.086 to 56 7054 0.015 W x 0.060 L6995-0 0.122 0.030 0.072 0.094 to 80 7064 L6995-1 0.167 0.075 L6995-2 0.240 0.148 L6995-22 0.217 0.125 0.020 W x 0.120 L6996-1 0.250 0.148 0.125 0.010 0.156 to 64 7059L6996-5 0.295 0.193 L6996-6 0.180 0.078 L6997-0 0.554 0.450 0.160 0.190 to 64 7061 0.020W x 0.145L6997-2 0.360 0.256 L6997-17 0.146 0.042 LC Type Part Number Dimensions Mounting Fig. A B C D THD. (UNS-2A) Tap P/N ROD Mat’l Slot 6930-3 0.475 0.345 0.152 0.010 0.190 to 64 7061 ALUMINA 0.020 W x 0.145 6930-5 0.625 0.495 6930-7 0.884 0.750 6930-17 0.674 0.490 0.061 0.020 6930-20 0.850 0.716 0.152 0.010 6930-21 0.379 0.195 0.061 0.020 C (Dia.) SLOT D A B THREAD SLOT D A B THREAD C (Dia.) SLOT D A B THREAD ROD Fig. 1 Fig. 2 Fig. 3

www.knowlescapacitors.com Dyna-Trim™ Dielectric Resonator Tuners

4000 Series

Fig. A B C D E F G NOM. FREQ. (GHz) 4003-1

4010 Series

Number Fig. A Rod Material Disk Material NOM. FREQ. (GHz) 4010-1 0.970 INVAR BRASS 4011-1 0.750 3 4012-1 0.500 4012-2 0.625 4014-1 0.250 INVAR (0NE-PIECE CONSTRUCTION) 9 Fig. 1 Fig. 2 C (DIA.) SEAL ASSY TUNING ROD (INVAR) A B SOLDER CERAMIC (ALUMINA) TUNING SLOT E LOCKING HEX. NUT G UNS-2A THREAD F D MECHANICAL STOP @ MAX TRAVEL 0.060 TRAVEL LOCKING HEX. NUT .04 THK X .28 A/F .234-64 X UNS-2A .38 MOUNTING SLOT .020 X .145 MECHANICAL STOP @ MAX. TRAVEL ROD .030 DISK.31 @ MAX. TRAVEL .26 TRAVEL .152 (DIA.) A (DIA.)

www.knowlescapacitors.com a Knowles Precision Devices brand TM MLC capacitors with silver/palladium (Ag/Pd) terminations have often been used in medical applications where non-magnetic components are required, for example in MRI equipment - however, conventional nickel barrier terminations are not suitable due to their magnetic properties. In addition, RoHS requirement to use lead-free solders would cause an increase in soldering temperatures and cause solder leaching problems for the Ag/Pd termination. This has meant alternatives have had to be found and one solution is to use a copper barrier instead of a nickel barrier, with a tin finish on top. This non-magnetic termination is offered with selected non-magnetic C0G/NP0 (1B), High Q and X7R (2R1) dielectrics, providing a fully non-magnetic component (µr = 1.0000). To meet high temperature 260ºC soldering reflow profiles as detailed in J-STD-020, C0G/NP0 (1B) dielectrics are supplied with FlexiCap™ or sintered termination whilst X7R (2R1) dielectrics are supplied only with the FlexiCap™ termination. Available in chip or ribbon leaded format for certain case sizes (please consult Sales Office). Non-Magnetic Caps - C0G/NP0 (1B), High Q, X7R (2R1) C0G/NP0 (1B), High Q - High Power RF capacitors - minimum/maximum capacitance values A range of ultra-low loss High Q ceramic capacitors with C0G/NP0 (1B) characteristics suitable for high power applications where minimal power loss and very low self heating is demanded. Common applications include MRI body coils and wireless charging systems operating in the kHz and MHz frequencies. Available in chip or ribbon leaded format. Chip size Case size 11 - 1111 Case size 25 - 2225 Case size 40 - 4040 100V 1.8nF 2.2nF 150V 1.2nF 1.5nF 200V 5.7nF 10nF 6.2nF 10nF 16nF 27nF 250V 820pF 1.0nF 500V 470pF 680pF 5.1nF 5.6nF 13nF 15nF 630V 270pF 390pF 3.6nF 4.7nF 11nF 12nF 1kV 82pF 220pF 1.1nF 3.3nF 5.6nF 10nF 2kV 0.3pF 68pF 510pF 1.0nF 1.6nF 5.1nF 3kV 110pF 470pF 910pF 1.5nF 3.6kV 1pF 47*/100pF - - 4kV 620pF 820pF 5kV - - 360pF 560pF 6kV - - 160pF 330pF 7.0/7.2kV 1pF 56**/150pF *47pF max. for dual rated @2.5kVac 30MHz **56pF max. for dual rated @5kVac 30MHz. C0G/NP0 (1B), High Q - minimum/maximum capacitance values Chip Size 0402 0603 0505 0805 1206 1210 1808 1812 2220 50V 63V 22pF 100pF 220pF 470pF 1.5nF - - - - 100V 15pF 68pF 150pF 330pF 1.0nF 2.2nF 2.2nF 4.7nF 10nF 150V 10pF 47pF 100pF 220pF 680pF 1.5nF 1.5nF 3.3nF 6.8nF 300V - 27pF 47pF 120pF 390pF 820pF 820pF 1.8nF 3.9nF 500V - - - 68pF 270pF 680pF 680pF 1.5nF 3.3nF 630V - - - - 150pF 390pF 390pF 1.0nF 2.2nF 1000V - - - - 82pF 220pF 220pF 680pF 1.5nF 2000V - - - - 18pF 68pF 68pF 150pF 470pF 3000V - - - - - - - 68pF 150pF Min Capacitance Tolerance ±0.05pF (<4.7pF) 0.1pF (>4.7pF & <10pF) ±1% (>10pF) X7R (2R1) - minimum/maximum capacitance values Chip Size 0402 0603 0805 1206 1210 1808 1812 2220 Min Cap 47pF 100pF 330pF 680pF 1.5nF 2.2nF 3.3nF 6.8nF 50V 63V 4.7nF 47nF 150nF 470nF 1.0µF 680nF 1.5µF 3.3µF 100V 1.5nF 10nF 47nF 150nF 470nF 330nF 1.0µF 1.5µF 200V250V 680pF 5.6nF 27nF 100nF 220nF 180nF 470nF 1.0µF 500V - 1.5nF 8.2nF 33nF 100nF 100nF 270nF 560nF 630V - - 4.7nF 10nF 27nF 33nF 150nF 330nF 1000V - - 3.3nF 4.7nF 15nF 18nF 56nF 120nF 1200V - - - 3.3nF 10nF 10nF 33nF 82nF 1500V - - - 2.7nF 6.8nF 6.8nF 22nF 47nF 2000V - - - 2.2nF 4.7nF 4.7nF 10nF 27nF Min Capacitance Tolerance ±5%

www.knowlescapacitors.com Ordering information - Voltronics Non-Magnetic capacitors 11 470 J 1000 W F R Chip size Capacitance Tolerance Voltage Termination Material Lead/ Packaging 0402* 0505 0603* 0805* 1111† 1206* 1210* 1812* 2220* 2225† 3838† 4040† 0R1 100 101 102 0.1pF 10pF 100pF 1000pF A B C D F G J K M ±0.05pF ±0.1pF ±0.25pF ±0.5pF ±1% ±2% ±5% ±10% ±20% 50 = 50V 100 = 100V 1000 =1000V W = Ag/Cu/Sn S = Pd/Ag M = Poly/Cu/Sn 2 = Ag/Cu/Sn - (Q dielectric only) 3 = Poly/Cu/Sn - (X dielectric only) B = Silver - (Q ribbon only) V = Silver, laquer Coated - (Q ribbon only) Q = High Q 0±30ppm/ºC X = X7R (2R1) R = Ribbon T* = Tape & Reel B* = Bulk Note: *Q and X dielectric only. †Ribbon Leads available. Ordering information - Syfer Non-Magnetic capacitors 1206 2 500 0223 J Q T - - 4040 2 7K0 0470 G Q B - AF9

2225 B 3K0 6P80 G Q B R W221

(Ribbon Leaded) Voltage Capacitance in picofarads (pF) Capacitance tolerance Dielectric Packing Lead Options Suffix code 0402* 0603 0505 0805 1206 1111 1210 1808 1812 2220 2225† 4040† 2 = Sintered silver with copper barrier* 3 = FlexiCap™ with copper barrier. 4 = Sintered silver with copper barrier* 5 = FlexiCap™ base with copper barrier. Ribbon Leaded B = Uncoated V = Coated with modified silicone laquer 50 = 50V 100 = 100V 1K0 = 1kV 2K0 = 2kV 3K0 = 3kV 4K0 = 4kV 5K0 = 5kV 6K0 = 6kV 7K0 = 7kV <10pF Insert a P for the decimal point, eg 2P20 = 2.2pF. >10pF. 1st digit is 0. 2nd and 3rd digits are significant figures of capacitance code. The 4th digit is number of 0’s following eg. 0470 = 47pF 0512 = 5100pF Values <1pF in 0.1pF steps, above this values are E24 series <4.7pF H = ±0.05pF B = ±0.1pF C = ±0.25pF D = ±0.5pF 4.7pF ~ <10pF B = ±0.1pF C = ±0.25pF D = ±0.5pF 10pF F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% C = C0G/ NP0 (1B) Q = High Q X = X7R (2R1) T = 178mm (7”) reel R = 330mm (13”) reel B = Bulk pack - tubs or trays R = Ribbon leaded Blank = SM chip W221 = Leaded W211 = Leaded marked AF9 = SM standard chip AF9LM = SM marked standard chip Note: *0402 - C0G/NP0 (1B) and High Q only. †Ribbon Leads available. **AF9 and AF9LM suffix code only available in 1111, 2225 and 4040 chip sizes. 2225 4040 12.0 max (0.473 max) 50 typ (1.97 typ) 11.5 max (0.45 max) 8.9±0.5 (0.35±0.02) 5.0 max (0.197 max) 0.25 -0.05 +0.10 0.01 -0.002 +0.004 ( ) 35 typ (1.378 typ) 5.5±0.5 (0.22±0.02) 9.3 max (0.366 max) 7.5 max (0.30 max) 4.4±0.5 (0.173 max) 0.25 -0.05 +0.10 0.01 -0.002 +0.004 ( ) T W Surface Mount See MLC Caps catalogue for dimensions. Ribbon Leaded Silver plated copper ribbon attached with HMP solder - (MP greater than 260ºC). a Knowles Precision Devices brand TM Non-Magnetic Caps - C0G/NP0 (1B), High Q, X7R (2R1) a Knowles Precision Devices brand TM

www.knowlescapacitors.com Note: Other capacitance values may become available, please contact the Sales Office if you need values other than those shown in the above tables. For dimensions and soldering information, please go to our website www.knowlescapacitors.com. Reeled Quantities Chip Size 0402 0505 0603 0805 1206 1111 1210 1808 1812 2220 2225 7” Reel 10000 2500 4000 3000 2500 10002000 1500 500 500 500 13” Reel 13” reel quantities available on request 6000 2000 2000 2000 Made from highly stable, low loss dielectric formulations, these traditional porcelain MLCs are known for their high RF power handling capability. Available in all industry common case sizes. The special silver-palladium termination and the proprietary ceramic formulations guarantee consistent non-magnetic performance. All MLCs in these series are RoHS compliant. Chips are available either with standard termination or can be fitted with ribbon leads, depending on your application. Porcelain Capacitors • Zero TC • Low Noise • Low ESR, High Q

• High Self-resonance • Established Reliability
• Capacitance range 0.1pF to 5.1nF Functional Applications Impedance Matching • DC Blocking • Bypass • Coupling
• Tuning and Feedback High Power RF capacitors - F & H materials - Minimum/maximum capacitance values Chip Size Case size 5 0505 Case size 11 1111 Case size 25 2225 Case size 38 3838 50V - - 680pF 1nF - - - - 100V - - 510pF 620pF - - - - 200V 36pF 100pF 220pF 470pF - - - - 500V - - 110pF 200pF 1.5nF 1.8nF 2.7nF 5.1nF 1kV - - 0.3pF 100pF 510pF 1.2nF 750pF 2.2nF 1.5kV - - - - 300pF 470pF - - 2.5kV - - - - 0.3pF 270pF 430pF 680pF 3.6kV - - - - - - 110pF 390pF Note: Special capacitance values available upon request. Non-Mag Caps, High Power RF - High Q Ordering information - Non-Magnetic capacitors 11 470 J 1000 W F R Chip size Capacitance Tolerance Voltage Termination Material Lead 0505 1111 2225† 3838† 0R1 100 101 102 0.1pF 10pF 100pF 1000pF A B C D F G J K ±0.05pF ±0.1pF ±0.25pF ±0.5pF ±1% ±2% ±5% ±10% 100 1000 50V 100V 1000V W S M Ag/Cu/Sn Pd/Ag Poly/Cu/Sn H F AH +90±20ppm/ºC CF 0±15ppm/ºC B = Chip R =Ribbon Note: †Available in chip or ribbon leaded format. a Knowles Precision Devices brand TM

www.knowlescapacitors.com Typical performance data - chip size 0805 High Q 0.01 0.1 100 1000 ESR (Ohms) Frequency (MHz) ESR vs Frequency 1pF 4.7pF 10pF 100pF 0.01 0.1 100 1000 ESR (Ohms) Frequency (MHz) ESR vs Frequency 1pF 4.7pF 10pF 100pF Typical performance data - chip size 1111 High Q Frequency (Mhz) Capacitance (pF) Resonant Frequency vs Capacitance 100 1000 10000 100000 0.1 11 0 100 1000 Series Parallel Frequency (Mhz) Capacitance (pF) Resonant Frequency vs Capacitance 0.1 11 0 100 1000 Series Parallel 100 1000 10000 100000 Q Capacitance (pF) Q vs Capacitance 100 1000 10000 100000 0.1 11 0 100 1000

150 MHz 500 MHz 1 GHz

Q Capacitance (pF) Q vs Capacitance 100 1000 10000 100000 0.1 11 0 100 1000 Non-Magnetic Capacitors - High Q ESR Measurement All ESR figures are measured using a VNA and 2m copper resonant tube and extrapolating to 30MHz by ratio. Measured data can be supplied on request. Measurement of ESR can vary with test method and components should only be compared when tested back-to-back on the same equipment under controlled conditions. 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 14012010080604020 ESR (mohms) Frequency (MHz) Typical ESR vs Frequency 4040 56pF 4040 18pF 2225 2.2nF 2225 10pF 4040 5.1nF 2225 39pF a Knowles Precision Devices brand TM

www.knowlescapacitors.com

• MRI / NMR Systems
• Radios / Jammers
• Power Amplifiers
• Radar
• Avionics Instrumentation
• Test Equipment Characteristics Precision machined design. US Patent No. 8,248,198
• 7mm high in SMD, Vertical SMD and thru-hole versions
• Nominal values of 32 to 118nH, 2 to 7 turns
• Q as high at 121 @ 100MHz, SRF 0.7 to 1.2GHz
• Superb shock, vibration and thermal tolerances
• -40ºC to +85ºC
• Customized version requests welcomed Part No. L (nH) Q (@ 100MHz) SRF (GHz) Turns Thread (mm)Min Nom Max No Core Surface Mount - Horizontal JLC02E030TRSM 32 33 34 39 90 1.2 2 6 JLC03E048TRSM 46 49 52 59 95 1 3 6 JLC04E065TRSM 60 64 68 78 101 0.9 4 6 JLC05E088TRSM 74 81 87 99 114 0.9 5 8 JLC06E110TRSM 94 107 119 123 119 0.7 6 8 JLC07E130TRSM 104 118 133 142 121 0.7 7 10 JLC09E160TRSM 122 139 170 191 162 0.58 9 13 JLC13E250TRSM 185 219 270 294 199 0.43 13 18 JLC19E375TRSM 281 345 436 457 171 0.31 19 25 Part No. L (nH) Q (@ 100MHz) SRF (GHz) Turns Thread (mm)Min Nom Max No Core Surface Mount - Vertical JLC02E030TRVSM 32 33 34 39 90 1.2 2 6 JLC03E048TRVSM 46 49 52 59 95 1 3 6 JLC04E065TRVSM 60 64 68 78 101 0.9 4 6 JLC05E088TRVSM 74 81 87 99 114 0.9 5 8 JLC06E110TRVSM 94 107 119 123 119 0.7 6 8 JLC07E130TRVSM 104 118 133 142 121 0.7 7 10 Part No. L (nH) Q (@ 100MHz) SRF (GHz) Turns Thread (mm)Min Nom Max No Core Thru Hole Mount - Vertical JLC02E030TRVPC 32 33 34 39 90 1.2 2 6 JLC03E048TRVPC 46 49 52 59 95 1 3 6 JLC04E065TRVPC 60 64 68 78 101 0.9 4 6 JLC05E088TRVPC 74 81 87 99 114 0.9 5 8 JLC06E110TRVPC 94 107 119 123 119 0.7 6 8 JLC07E130TRVPC 104 118 133 142 121 0.7 7 10 Non-Magnetic Variable Inductors

www.knowlescapacitors.com Non-Magnetic Fasteners and Hardware Due to the severe non-magnetism requirements in the magnetic resonance industries, we use only high purity metals that exhibit no measurable magnetism. Commercial brass is simply not acceptable for these applications. Our strict traceability and testing regimes insure this essential parameter. We can offer sizes, styles and lengths beyond those shown in the tables below – such as Cheese Head, Round Head and Set Screws. We also offer flat washers to complete your needs. Countersunk Flat Head Coils also require inserts, pins and other special shapes that are custom-designed to the customer’s specific requirements. The ability to quickly and precisely supply custom designs is part of our heritage and we are eager to sample our high quality hardware based on your requirements. As with the fasteners, we use only high purity metals that exhibit no measurable magnetism. Pan Head 2-56 Thread 48-109 5/64” 48-107 3/32” 48-105 3/16” 48-100 1/25” 48-106 5/16” 48-101 3/8” 48-102 1/2” 48-101 5/8” 48-104 3/4” 48-108 1” 48-500 Hex Nut 4-40 Thread 48-115 3/16” 48-110 1/4” 48-116 5/16” 48-111 3/8” 48-112 1/2” 48-117 5/8” 48-113 3/4” 48-114 1” 48-118 2” 48-501 Hex Nut 6-32 Thread 48-120 1/4” 48-124 3/16” 48-121 3/8” 48-122 1/2” 48-123 3/4” 48-125 1” 48-502 Hex Nut 8-32 Thread 48-130 1/4” 48-131 3/8” 48-132 1/2” 48-133 3/4” 48-503 Hex Nut 10-32 Thread 48-140 1/4” 48-141 3/8” 48-142 1/2” 48-143 5/8” 48-144 3/4” 48-145 1” 48-505 Hex Nut 1/4-20 Thread 48-150 3/8” 48-152 1/2” 48-151 1” 48-153 1-1/4” 48-506 Hex Nut M2 x .4 Thread 48-300 6mm 48-301 12mm 48-302 16mm 48-600 Hex Nut M2.5 x .45 Thread 48-310 8mm 48-601 Hex Nut M3 x .5 Thread 48-320 5mm 48-321 6mm 48-322 7.5mm 48-323 8mm 48-324 10mm 48-325 12mm 48-326 16mm 48-327 20mm 48-602 Hex Nut M4 x .7 Thread 48-330 8mm 48-331 10mm 48-332 12mm 48-333 16mm 48-334 20mm 48-335 25mm 48-603 Hex Nut M5 x .8 Thread 48-340 8mm 48-341 10mm 48-342 12mm 48-343 16mm 48-344 20mm 48-345 25mm 48-604 Hex Nut M2 x .4 Thread 48-400 5mm 48-401 10mm 48-600 Hex Nut M3 x .5 Thread 48-415 6mm 48-410 8mm 48-411 10mm 48-412 12mm 48-413 16mm 48-414 20mm 48-602 Hex Nut M4 x .7 Thread 48-420 8mm 48-421 10mm 48-422 12mm 48-423 16mm 48-424 20mm 48-603 Hex Nut M5 x .8 Thread 48-430 8mm 48-431 10mm 48-432 12mm 48-433 16mm 48-434 20mm 48-435 25mm 48-604 Hex Nut 2-56 Thread 48-205 9/64” 48-203 3/16” 48-200 1/4” 48-204 3/8” 48-201 1/2” 48-202 1” 48-500 Hex Nut 4-40 Thread 48-210 1/4” 48-216 5/16” 48-211 3/8” 48-212 1/2” 48-213 3/4” 48-214 1” 48-215 1-1/4” 48-501 Hex Nut 6-32 Thread 48-220 1/4” 48-221 3/8” 48-228 7/16” 48-222 1/2” 48-223 3/4” 48-224 1” 48-225 1-1/4” 48-229 1-3/8” 48-226 1-1/2” 48-227 1-3/4” 48-502 Hex Nut 8-32 Thread 48-230 3/8” 48-231 1/2” 48-232 5/8” 48-233 3/4” 48-503 Hex Nut 10-32 Thread 48-240 3/8” 48-241 1/2” 48-242 5/8” 48-243 3/4” 48-244 1” 48-245 1-1/4” 48-505 Hex Nut 1/4-20 Thread 48-250 3/4” 48-506 Hex Nut a Knowles Precision Devices brand TM

Other products available from StackiCap™ Capacitors Pulse Capacitors High Temperature Capacitors Planar Arrays HiT Capacitors Pulse Power Capacitors Feedthrough EMI Filters Ultra Low ESR Capacitors Single Layer Capacitors Opti-Cap Capacitors Specialty Products Hi-Rel Products High capacitance value chips Solder in EMI Filters Broadband Blocking Capacitors Gain Equalizers EMI Filters Radial Leaded Capacitors X2Y 3 terminal EMI chips Safety Certified Capacitors Single Layer Capacitors Thin Film Products Power Dividers

Other products available from StackiCap™ Capacitors Pulse Capacitors High Temperature Capacitors Planar Arrays HiT Capacitors Pulse Power Capacitors Feedthrough EMI Filters Ultra Low ESR Capacitors Single Layer Capacitors Opti-Cap Capacitors Specialty Products Hi-Rel Products High capacitance value chips Solder in EMI Filters Broadband Blocking Capacitors Gain Equalizers EMI Filters Radial Leaded Capacitors X2Y 3 terminal EMI chips Safety Certified Capacitors Single Layer Capacitors Thin Film Products Power Dividers

www.knowlescapacitors.com © Copyright Knowles Precision Devices, 2018 - design: creations@panpublicity.co.uk Asian Sales Offi ce O: +86 512 62588258 F: +86 512 62589258 KPD-Asia-sales@knowles.com European Sales Offi ce O: +44 1603 723300 F: +44 1603 723301 KPD-Europe-sales@knowles.com North American Sales Offi ce O: +1 661 295 5920 F: +1 661 295 5928 O: +1 315 655 8710 F: +1 315 655 0445 KPD-NA-sales@knowles.com