MHJ9-LF FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Part number: 572078 Data sheet Feature Value Valve function 2/2, closed, monostable Actuation type Electrical Width 9 mm Standard nominal flow rate 50 l/min Pneumatic working port Sub-base Operating voltage 24V DC Operating pressure 0.5 bar ... 8 bar Design Poppet valve without return spring Reset method Pneumatic spring Degree of protection IP40 Width dimension 9.5 mm Type code MHJ9 Information on operation Do not operate without flow. For block assembly with flow rate at max. ambient temperature 45 °C. Sealing principle Hard Mounting position Any Manual override None Type of control Direct Flow direction Non-reversible Symbol 00992259 b-value 0.5 C value 0.2 l/sbar Max. switching frequency 500 Hz Switching time on at 4 bar and 24 V in new condition 0.7 ms Switching time off at 4 bar and 24 V in new condition 0.9 ms Switching time on at 4 bar and 48 V in new condition 0.6 ms Switching time off at 4 bar and 48 V in new condition 0.8 ms Switching time on at 4 bar and 12 V in new condition 1 ms Switching time off at 4 bar and 12 V in new condition 0.9 ms Switching time on at 0.5 bar and 24 V in new condition 0.7 ms Switching time off at 0.5 bar and 24 V in new condition 0.9 ms Switching time on at 8 bar and 24 V in new condition 0.8 ms Switching time off at 8 bar and 24 V in new condition 0.9 ms Tolerance for switching time off +15 %/-25 % Tolerance for ON switching time +/-15 % 4/8/21 - Subject to change - Festo AG & Co. KG 1/2
DC operating voltage range 12 V ... 53 V Duty cycle 100% Note regarding operating voltage Operation only with connecting cable MHJ9-KMH-... Coil resistance 2.5 Ohm Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication not possible Restricted ambient and media temperature Depending on the switching frequency (see diagram) Corrosion resistance class (CRC) 2 - Moderate corrosion stress Storage temperature -20 °C ... 50 °C Permissible solenoid surface temperature 120 °C Temperature of medium -5 °C ... 60 °C Ambient temperature -5 °C ... 60 °C Max. tightening torque for valve mounting 0.28 Nm Product weight 25 g Electrical connection 2-pin KMH plug Type of mounting On sub-base Pneumatic connection 1 Sub-base Pneumatic connection 2 Sub-base Note on materials RoHS-compliant Seals material HNBR Housing material PA-reinforced Material of screws Steel 4/8/21 - Subject to change - Festo AG & Co. KG 2/2