569-010X-XXX DIALIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Multiple CBIs form horizontal LED arrays on 3.35mm (0.132”) center-lines High Contrast, UL 94 V-0 rated, black housing Oxygen index: 32% Polymer content: PBT, 0.860 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 Compatible with: 569-011x-x00 Narrow Bi-Level C ustom C om binations Contact factory for information on custom color combinations *IF=20mA NEW Tolerance note: As noted, otherw ise: LED Protrusion: ±0.04 mm [±0.016] CBI Housing: ±0.02mm[±0.008] ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
4-57Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778 www.dialight.com 3m m D iscrete LED Tinted, D iffused 521-9831 3.4 [.134] 3.1 [.122] 0.6 [.024] 0.4 [.016] ø2.9 [.114] 2.7 [.106] 4.8 [.189] 4.4 [.173] 3.7 [.145] 3.5 [.138] 6.1 [.240] 5.7 [.224] 29 [1.142] 27 [1.063] 1.8 [.071] 1.2 [.047] CATHODE 2.54 [.100] 0.6 [.024] 0.4 [.016] 0.7 [.028] 0.4 [.016] 4.8 [.189] 4.4 [.173] SURFACE NOT FLAT PAR T N O . C O LO R 521-9831 Blue ³ Blue ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9831 Power Dissipation (mW) 100 Forward Current (mA) 20 Derating (mA/°C)From 55°C .44 Operating Temperature (°C) -40/+100 Storage Temperature (°C) -40/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Blue OPERATING CHARACTERISTICS (TA=25°C) -9831 Luminous Intensity (mcd) Min. 6.3 IF=10mA Typical 12 Peak Wavelength (nm) Typical 428 λ Peak Viewing Angle (2Θ½) Typical 70° Forward Voltage (V) Typical 3.5 IF=10mA Max. 4.2 Reverse Voltage (V) IR=10µA Min. 3 Dimensions in mm [inches] Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity Solder Adherence per MIL-STD-202E, Method 208C M O U N TIN G C LIP: 515-0006 located on page 4-65 ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES NEW
4-58 Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778 www.dialight.com Green Yellow Red Orange Red ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9210 -9211 -9216 -9498 -9636 Power Dissipation (mW) 100 60 100 135 100 Forward Current (mA) 30 20 30 25 40 Operating Temperature (°C) -55/+100 -55/+100 -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 -55/+100 -55/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from body 3m m D iscrete LED H igh Efficiency D iffused 521-9210, -9211, -9216, -9498, -9636 4.45 [.175] 1.02 [.040] 3.00 [.118] 1.50 [.059] MAX 6.00 [.236] 25.4 [1.0] MIN 1.02 [.040] MIN .45 [.016 ] .40 [.016] 2.54 [.100] 3.30 [.13] PAR T N O . C O LO R 521-9210 Green 521-9211 Yellow 521-9216 Red 521-9498 Orange 521-9636 Red Green Yellow Red Orange Red OPERATING CHARACTERISTICS (TA=25°C) -9210 -9211 -9216 -9498 -9636 IF=10mA 1 IF=20mA Typical 12.6 10 10 7 48 1 Peak Wavelength (nm) Typical 565 585 635 600 660 λ Peak Viewing Angle (2Θ ½ ) Typical 60° 60° 60° 60° 60° Forward Voltage (V) Typical 2.1 1 2.11 21 2.2 1.8 1 Reverse Voltage (V), IR =100µA Max. 5 5 5 5 4 Dimensions in mm [inches] Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity Solder Adherence per MIL-STD-202E, Method 208C M O U N TIN G C LIP: 515-0006 located on page 4-65 short lead cathode all colors except 521-9636 Red. For 521-9636 Red, short lead is anode. NEW