567796 FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MHJ10-S-2,5-HF/LP Part number: 567796 Data sheet Feature Value Valve function 2/2, closed, monostable Actuation type Electrical Width 10 mm Standard nominal flow rate 160 l/min Pneumatic working port Sub-base Operating voltage 24V DC Operating pressure 0.5 bar ... 4 bar Structural design Poppet valve without return spring Reset method Pneumatic spring Degree of protection IP65 Certification RCM compliance mark KC characters KC EMC CE marking (see declaration of conformity) As per EU EMC directive Width dimension 10.5 mm Type code MHJ10 Information on operation Power supply unit must be able to supply at least 1.7 A without voltage drop. Do not operate without flow. For block assembly with flow rate at max. ambient temperature 45 °C. Sealing principle Hard Mounting position Any Manual override None Type of control Direct Flow direction Non-reversible Symbol 00992259 Reverse polarity protection for operating voltage Additional functions Spark suppression Holding current reduction with energy recovery Safety shut-down b-value 0.36 C value 0.66 l/sbar Max. switching frequency 500 Hz Switching time on at 4 bar and 24 V in new condition 1 ms Switching time off at 4 bar and 24 V in new condition 0.5 ms Switching time on at 0.5 bar and 24 V in new condition 0.8 ms Switching time off at 0.5 bar and 24 V in new condition 0.6 ms 11/15/21 - Subject to change - Festo AG & Co. KG 1/2
Tolerance for switching time off +15 %/-25 % Tolerance for ON switching time +/-15 % Input resistance 34 kOhm Duty cycle 100% Coil characteristics 24 V DC: low-current phase 2.0 W, high-current phase 7.0 W Trigger signal range DC 3 V ... 30 V Note on input current Linear increase 0.09-0.44 mA for a trigger signal of 3-15 V 0.44-15.44 mA for a trigger signal of 15-30 V Permissible voltage fluctuations +/- 10 % Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication not possible Restricted ambient and media temperature Depending on the switching frequency (see diagram) Corrosion resistance class (CRC) 2 - Moderate corrosion stress Storage temperature -20 °C ... 50 °C Permissible solenoid surface temperature 120 °C Temperature of medium -5 °C ... 60 °C Ambient temperature -5 °C ... 60 °C Max. tightening torque for valve mounting 0.7 Nm Product weight 75 g Electrical connection 3-wire Cable Cable length 2.5 m Type of mounting On sub-base Pneumatic connection 1 Sub-base Pneumatic connection 2 Sub-base Note on materials RoHS-compliant Seals material HNBR Housing material PA-reinforced PPS-reinforced Material of cable sheath PUR Material of screws Steel 11/15/21 - Subject to change - Festo AG & Co. KG 2/2