MHJ9-QS-6-HF FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Part number: 567790 Data sheet Feature Value Valve function 2/2, closed, monostable Actuation type Electrical Width 9 mm Standard nominal flow rate 160 l/min Pneumatic working port QS-6 Operating voltage 24V DC Operating pressure 0.5 bar ... 6 bar Design Poppet valve without return spring Reset method Pneumatic spring Degree of protection IP40 Width dimension 9.5 mm Type code MHJ9 Operating conditions to DIN VDE 0580 S3 50% 20min. for single pneumatic valve S3 15% 20 min for block assembly Information on operation Do not operate without flow. Sealing principle Hard Mounting position Any Manual override None Type of control Direct Flow direction Non-reversible Symbol 00992259 b-value 0.36 C value 0.66 l/sbar Max. switching frequency 500 Hz Switching time on at 4 bar and 24 V in new condition 1 ms Switching time off at 4 bar and 24 V in new condition 0.5 ms Switching time on at 4 bar and 48 V in new condition 0.8 ms Switching time off at 4 bar and 48 V in new condition 0.4 ms Switching time on at 4 bar and 12 V in new condition 1.4 ms Switching time off at 4 bar and 12 V in new condition 0.6 ms Switching time on at 0.5 bar and 24 V in new condition 0.9 ms Switching time off at 0.5 bar and 24 V in new condition 0.7 ms Switching time on at 6 bar and 24 V in new condition 1.3 ms Switching time off at 6 bar and 24 V in new condition 0.5 ms Tolerance for switching time off +15 %/-25 % 4/8/21 - Subject to change - Festo AG & Co. KG 1/2
Tolerance for ON switching time +/-15 % DC operating voltage range 12 V ... 53 V Note regarding operating voltage Operation only with connecting cable MHJ9-KMH-... Coil resistance 5 Ohm Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication not possible Restricted ambient and media temperature Depending on the switching frequency (see diagram) Corrosion resistance class (CRC) 2 - Moderate corrosion stress Storage temperature -20 °C ... 50 °C Permissible solenoid surface temperature 120 °C Temperature of medium -5 °C ... 60 °C Ambient temperature -5 °C ... 60 °C Product weight 30 g Electrical connection 2-pin KMH plug Type of mounting Optionally: Line installation With through-hole Pneumatic connection 1 QS-6 Pneumatic connection 2 QS-6 Note on materials RoHS-compliant Seals material HNBR Housing material PA-reinforced Material of screws Steel 4/8/21 - Subject to change - Festo AG & Co. KG 2/2