567503 FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MHJ10-S-2,5-QS-6-HF Part number: 567503 Data sheet Feature Value Valve function 2/2, closed, monostable Actuation type Electrical Width 10 mm Standard nominal flow rate 160 l/min Pneumatic working port QS-6 Operating voltage 24V DC Operating pressure 0.5 bar ... 6 bar Structural design Poppet valve without return spring Reset method Pneumatic spring Degree of protection IP65 Certification RCM compliance mark KC characters KC EMC CE marking (see declaration of conformity) As per EU EMC directive Width dimension 10.5 mm Type code MHJ10 Operating conditions to DIN VDE 0580 S3 50% 20min. for single pneumatic valve S3 25% 20 min for block assembly Information on operation Power supply unit must be able to supply at least 1.7 A without voltage drop. Do not operate without flow. Sealing principle Hard Mounting position Any Manual override None Type of control Direct Flow direction Non-reversible Symbol 00992259 Reverse polarity protection for operating voltage Additional functions Spark suppression Holding current reduction with energy recovery Safety shut-down b-value 0.36 C value 0.66 l/sbar Max. switching frequency 500 Hz Switching time on at 4 bar and 24 V in new condition 1.2 ms Switching time off at 4 bar and 24 V in new condition 0.6 ms Switching time on at 0.5 bar and 24 V in new condition 1 ms 11/15/21 - Subject to change - Festo AG & Co. KG 1/2
Switching time off at 0.5 bar and 24 V in new condition 0.8 ms Switching time on at 6 bar and 24 V in new condition 1.3 ms Switching time off at 6 bar and 24 V in new condition 0.6 ms Tolerance for switching time off +15 %/-25 % Tolerance for ON switching time +/-15 % Input resistance 34 kOhm Coil characteristics 24 V DC: low-current phase 3.2 W, high-current phase 14.5 W Trigger signal range DC 3 V ... 30 V Note on input current Linear increase 0.09-0.44 mA for a trigger signal of 3-15 V 0.44-15.44 mA for a trigger signal of 15-30 V Permissible voltage fluctuations +/- 10 % Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication not possible Restricted ambient and media temperature Depending on the switching frequency (see diagram) Corrosion resistance class (CRC) 2 - Moderate corrosion stress Storage temperature -20 °C ... 50 °C Permissible solenoid surface temperature 120 °C Temperature of medium -5 °C ... 60 °C Ambient temperature -5 °C ... 60 °C Product weight 85 g Electrical connection 3-wire Cable Cable length 2.5 m Type of mounting Optionally: Line installation With through-hole Pneumatic connection 1 QS-6 Pneumatic connection 2 QS-6 Note on materials RoHS-compliant Seals material HNBR Housing material PA-reinforced PPS-reinforced Material of cable sheath PUR Material of screws Steel 11/15/21 - Subject to change - Festo AG & Co. KG 2/2