PIQ AITSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

AiT Semiconductor Inc. www.ait-ic.com POWER INDUCTOR PIQ

  • FEATURE 1. Excellent solder heat resistance(add “C” is for high current type) 2. Low voltage drops and small variations inductance
  • APPLICATION 1. DC power supply circuits 2. Power line choke coils…etc
  • ORDERING INFORMATION PIQ322516 -R12 T PN Inductance K: ±10% M:±20%
  • SHAPE AND DIMENSION ●SCHEMATICS AND LAND PATTERNS(mm)
  • SPECIFICATION Dimension in mm TYPE A B C D E F G I H Note1. Measurement frequency of Inductance value : at 1kHz, 0.25V Note2. Measurement ambient temperature of L, DCR and IDC : at 25°C Note3. IDC : This indicates the value of current when the inductances is 10% lower than its initial Note4. Inductance tolerance: K: ±10% ; M: ±20% Note5. This specification might be changed without notice due to under developing and improving.

AiT Semiconductor Inc. www.ait-ic.com POWER INDUCTOR PIQ

  • ELECTRICAL CHARACTERISTICS PART NUMBER Inductance (uH) PIQ201610T PIQ252010H PIQ252012H PIQ322516 PIQ321618 R12 0.12 0.13 / 0.184 R27 0.27 R47 0.47 0.17 / 0.178 1R5 1.5 0.52 / 0.155 4R2 4.2 120 12 0.684 / 0.59 2.70 / 0.095 150 15 0.888 / 0.54 2.90 / 0.090 180 18 1.087 / 0.48 3.00 / 0.085 220 22 1.343 / 0.43 3.10 / 0.085 330 33 2.245 / 0.35 3.80 / 0.080 390 39 4.50 / 0.085 470 47 3.064 / 0.29 6.30 / 0.085 560 56 4.120 / 0.27 7.10 / 0.050 680 68 5.289 / 0.24 7.90 / 0.050 820 82 7.223 / 0.20 8.70 / 0.045 101 100 8.209 / 0.19 11.57 / 0.045 151 150 12.57 / 0.16 15.03 / 0.015 181 180 19.65 / 0.14 16.60 / 0.013 221 220 22.31 / 0.13 271 270 24.61 / 0.12 29.70 / 0.011 331 330 28.21 / 0.11 43.06 / 0.010 391 390 32.19 / 0.10 471 470 48.75 / 0.09 53.50 / 0.008 561 560 53.89 / 0.08 681 680 63.01 / 0.07 821 820 66.10 / 0.005 102 1000 PIQ201610T/ PIQ252010H/ PIQ252012H: Measurement frequency of Inductance value : at 1MHz, 1V/ 0.25V/ 0.1V

AiT Semiconductor Inc. www.ait-ic.com POWER INDUCTOR PIQ PART NUMBER Inductance (uH) PIQ322520 PIQ453226 PIQ575047 PIQ322520C PIQ453226C R12 0.12 0.010 / 6.00 R47 0.47 0.018 / 4.80 4R2 4.2 390 39 3.90 / 0.110 1.40 / 0.240 820 82 6.20 / 0.080 2.20 / 0.170 271 270 12.50 / 0.065 6.80 / 0.100 821 820 20.50 / 0.060

AiT Semiconductor Inc. www.ait-ic.com POWER INDUCTOR PIQ

  • GENERAL CHARACTERISTICS 1. Operating temperature range: -40 TO + 85°C (Includes temperature when the coil is heated) 2. External appearance: On visual inspection, the coil has external defects. 3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 0.5kg 4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: Inductance coefficient (0~2,000)x10-6/°C (-25~+80°C). 7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds. 11. Storage environment Storage condition: Temperature Range: 10°C ~ 35°C (Generally: 21°C ~ 31°C) Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) Transportation condition: Temperature Range: -35°C ~ 85°C, Humidity Range: 50% ~ 95% RH 12. Use components within 6 months. If 6 months or more have elapsed, check soldarability before use. 13. Reflow profile recommend: Lead - free heat endurance test Lead-free the recommended reflow condition