55A6253 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
SPECIFICATION CONTROL DRAWING 55A6253 TITLE JACKET - RADIATION-CROSSLINKED, MODIFIED ETFE DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL. Page 1 of 1 TWO CONDUCTOR CABLE, SHIELDED, JACKETED This specification sheet forms a part of the latest issue of Raychem Specification 55A. SHIELD - TIN-COATED COPPERCOMPONENT WIRES - 55A0812 E CABLE RATINGS AND ADDITIONAL REQUIREMENTS NOMINAL OUTSIDE DIAMETER (inches) 55A6253-26-* 55A6253-24-* 55A6253-22-* 55A6253-20-* 55A6253-18-* 55A6253-16-* 55A6253-14-* 55A6253-12-* 55A6253-10-* 55A6253-8-* MAXIMUMMINIMUM MAXIMUM .005 .005 .005 .005 .006 .006 .007 .007 .007 .009 .010 .010 .010 .010 .011 .011 .012 .012 .013 .017 .113 .123 .135 .151 .173 .187 .223 .257 .303 .433 .119 .129 .141 .158 .182 .196 .234 .270 .318 .455 9.2 11.0 14.3 18.5 24.6 29.2 41.8 57.8 85.1 161. NOTE: Nominal values are for information only. Nominal values are not requirements. TEMPERATURE RATING: 150°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level BLOCKING: 200 ± 3°C for 6 hours CROSSLINKED VERIFICATION: 300 ± 5°C for 6 hours DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz FLAMMABILITY: Procedure 1, 3 seconds (maximum); 3 in. (maximum); no flaming of facial tissue JACKET COLOR: White preferred JACKET ELONGATION AND TENSILE STRENGTH: Elongation, 50% (minimum) Tensile Strength, 5000 lbf/in² (minimum) JACKET FLAWS: Spark Test, 1500 volts (rms) Impulse Dielectric Test, 6.0 kV (peak) LOW TEMPERATURE-COLD BEND: -55 ± 5°C for 4 hours SHIELD COVERAGE: 85% (minimum) VOLTAGE WITHSTAND TEST (Post Environmental): 1000 volts (rms), 60 Hz, 1 minute PART NUMBER: The "*" in the part numbers above shall be replaced by color code designators with a slash separating the component wire colors and a dash separating the component wire colors from the jacket color. 1/ Example: AWG 20, red and orange component wires; white jacket: 55A6253-20-2/3-9 PART NUMBER CONDUCTOR SIZE (AWG) SHIELD SIZE (AWG) MAXIMUM WEIGHT (lb/1000 ft.) JACKET THICKNESS (inches) CABLE CONSTRUCTION DETAILS 10-16-03 R Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCH EM PART NUMBER, SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any sp ecification, without notification to Buyer. Users should evaluate the suitability of this product for their application. Specifications are subject to change without noti ce. This cable shall meet all constructional requirements of M27500 (AWGSP2T23)