007237-000 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
SPECIFICATION CONTROL DRAWING 55A0812 TE WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, Oe OSAPRII Revision NORMAL WEIGHT, GENERAL PURPOSE, 600 VOLT U1 This specification sheet forms a part of the latest issue of Raychem Specification 55A. CONDUCTOR - SILVER-COATED COPPER PRIMARY INSULATION - RADIATION-CROSSLINKED, MODIFIED ETFE Primary insulation shall be of a contrasting pigmentation to that of the jacket. JACKET - RADIATION-CROSSLINKED, MODIFIED ETFE TABLE I. CONSTRUCTION DETAILS DIAMETER OF FINISHED WIRE WIRE | CONDUCTOR STRANDED MAXIMUM PART NUMBER size | STRANDING CONDUCTOR RESISTANCE | DIAMETER MAXIMUM cal (AWG) | (number x AWG) (in) AT 20°C (in) WEIGHT MINIMUM (ohms/1000 ft.) (tbs/1000 ft.) [snooze [a | ox | oe | oo | v4 | woroe| a7 _| S5ADEI2-22° 19x34 50.02 S5ADEIIAG" ‘9x20 [052 | 08s | ase [ orzo 90 _| S5ADEI2AZ= 728 [-ssaoei20- | 0 | —arxas | 106 | ra} 110 | 192.008 | 2a _| wsagera-e= |e | vooxze | 68 [160 | 008 | ro52.008[ or _| ssaoer26° [6 | rane | 08 [21a] ae | 2are 010 seager2- 0° | 0 | i045 x00 5102 016 [-ssaoei2407 [oo | vaso x20 [| wo | _a75__| 005 | rox. | sw | [-ssa0er2-0007 | ooo | —vee5 x20 | soo | s00 | os | ovos.016 | om _| 85A0812.0000" 2100 90 575 020 ‘Tyco Electronics also reserves the righ! 10 make changes in materials or processing, which do not affect compliance with any specication, without notification to Buyer. ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER Tyco Electronics Corporation Page 1 of 3 501 Oakside Avenue THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN, TE Connectivity | Redwood City, CA 94063-3800 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 1-800-227-8816 ‘© 2008-2011 Tyco Electronics Corporation. All rights reserved
TE Connectivity U1 55A0812 PART NUMBER (inch) (+ 3%) (Ib) (+ 3%) V ACCELERATED AGING ACCELERATED AGING [seacoast Pmt] Std [___ssaneraae | 00s 0 Yo ee [ssaoerai6 [0 [| 180 [| 200 [sao | ssaoeraias [100 | 200] 300 | s00__] | ssnoera 800i od t00 [_ssaoeia af 0 | eu | 6m [| 150 ee [—ssaoere- 07 [|e | oo] 6m | 150] a [___ssaoer2000= [1000 | eo | 200 [—ssnoeiza000" | 100 [| 20 | ew | 200 © 2008-2011 Tyco Electronics Corporation. All rights reserved.
=7TE Revision] SCD Number een, | SPECIFICATION CONTROL DRAWING | Fase 3063} U1 55A0812 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level ACCELERATED AGING (CROSSLINKING PROOF): 300 + 3°C for 7 hours BLOCKING: 230 + 3°C for 24 hours. COLOR: White preferred CONCENTRICITY: 70% (minimum) FLAMMABILITY: Procedure 1, 3 seconds (maximum); 3 inches (maximum); no flaming of facial tissue HUMIDITY RESISTANCE: Insulation Resistance, 5000 megohms for 1000 ft. (minimum), AWG 26 - 10 3000 megohms for 1000 ft. (minimum), AWG 8 - 0000 IDENTIFICATION, COLOR STRIPING AND BAND DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight IMMERSION: Diameter increase 5% (maximum); no cracking, no dielectric breakdown INSULATION ELONGATION AND TENSILE STRENGTH: Tensile strength, 5000 Ibffin? (minimum) for primary insulation 5000 lbffin? (minimum) for total insulation (primary insulation and jacket) Elongation, 125% (minimum) for primary insulation, AWG 26 - 10 only 75% (minimum) for total insulation (primary insulation and jacket) INSULATION FLAWS: Primary Insulation, Spark Test, 1.5 kV (rms) at 60 Hz 4.2 kV (rms) at 3 kHz Impulse DielectricTest, 6.0 kV (peak) Finished Wire, Spark Test, 5.7 kV (rms) at 3 kHz Impulse Dielectric Test, 8.0 kV (peak) INSULATION RESISTANCE: 5000 megohms for 1000 ft. (minimum), AWG 26 - 10 3000 megohms for 1000 ft. (minimum), AWG 8 - 0000 INSULATION THICKNESS; 0.003 in. (minimum) for primary insulation 0.004 in. (minimum) for outer jacket 0.009 in. (minimum) for total insulation LIFE CYCLE: 230 + 3°C for 500 hours LOW TEMPERATURE-COLD BEND: -65 + 3°C for 4 hours SHRINKAGE: 230 + 3°C, for 6 hours, 0.125 in. (maximum) in 12 inches SMOKE TEST: 250 + 5°C, no visible smoke SOLDERABILITY: Per MIL-STD-202, Method 208, except without steam aging (for 10 AWG and smaller only). SURFACE RESISTANCE: 500 megohms-in. (minimum), both readings THERMAL SHOCK RESISTANCE: 200 + 3°C, 0.060 in. (maximum), AWG 26 - 12 0.100 in. (maximum), AWG 10 - 8 0.125 in. (maximum), AWG 6 - 0000 VOLTAGE WITHSTAND TEST (Post Environmental): 2500 volts (rms), 60 Hz WICKING: 2.25 in. (maximum) WRAP TEST: 313 + 3°C for 2 hours PART NUMBER: The “*” in the part numbers on pages 1 and 2 shall be replaced by a color code designator. i Example: AWG 22, white; 55A0812-22-9 AWG 22, white with a blcak stripe; 5540812-22-90 4/ See footer section on page 1 © 2008-2011 Tyco Electronics Corporation. All rights reserved.