553200 FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
DAPS-0360-090-RS2-F1012-T6 Part number: 553200 Data sheet Feature Value Size of valve actuator 0360 Flange hole pattern F10 F12 Swivel angle 90 deg End-position adjusting range at 0° -1 deg ... 9 deg End-position adjusting range at nominal swivel angle 81 deg ... 91 deg Depth shaft connection 29.5 mm Type code DAPS Information on the end-position adjusting range One end position optionally adjustable Standard connection for valve ISO 5211 Cushioning No cushioning Mounting position Any Mode of operation Single-acting Design Scotch yoke system Position sensing None Closing direction Clockwise closing Symbol 00991266 Valve connection conforms to standard VDI/VDE 3845 (NAMUR) Safety integrity level (SIL) Up to SIL 2 high demand mode Up to SIL 2 low demand mode Connection pressure for spring force 0.35 MPa Connection pressure for spring force 3.5 bar Nominal operating pressure 0.56 MPa Nominal operating pressure 5.6 bar CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX) Explosion prevention and protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) ATEX category gas II 2G ATEX category for dust II 2D Type of ignition protection for gas Ex h IIC T6...T3 Gb X Type of (ignition) protection for dust Ex h IIIC T85°C...T200°C Db X Explosive ambient temperature -50°C <= Ta <= +60°C Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] 8/9/21 - Subject to change - Festo AG & Co. KG 1/2
Information on operating and pilot media Operation with oil lubrication possible (required for further use) Corrosion resistance class (CRC) 3 - High corrosion stress Ambient temperature -50 °C ... 60 °C Torque at nominal operating pressure and 0° swivel angle 450 Nm Torque at nominal operating pressure and 50° swivel angle 247.5 Nm Torque at nominal operating pressure and 90° swivel angle 375 Nm Note about the torque The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling. Spring return torque at 0° swivel angle 150 Nm Spring return torque with 50° swivel angle 112.5 Nm Spring return torque with 90° swivel angle 225 Nm Spring force 2 Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 14 l Product weight 16500 g Shaft connection T27 Pneumatic connection G1/4 Note on materials Contains paint-wetting impairment substances RoHS-compliant Cover material Wrought aluminum alloy Seals material FVMQ PTFE-reinforced Housing material Wrought aluminum alloy Material of screws High-alloy steel Shaft material High-alloy steel Material number for shaft 1.4305 8/9/21 - Subject to change - Festo AG & Co. KG 2/2