553-0233F

553-0233F DIALIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Features

 Multiple CBIs form horizontal LED arrays on 4.45mm (0.175”) center-lines. See page 4-41 and 4-42 for pre-assembled arrays  High Contrast, UL 94 V-0 rated, black housing  Oxygen index: 32%  Polymer content: PBT, 0.343 g  Housing stand-offs facilitate PCB cleaning  Solderability per MIL-STD-202F, method 208F  LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 Tolerance note: As noted, otherw ise:  LED Protrusion: ±0.04 mm [±0.016]  CBI Housing: ±0.02mm[±0.008] C ustom C om binations  Contact factory for information on custom bi-level arrays and color combinations. 4.32 [.170] 2.54 [.100] 5.08 [.200]9.65 [.380] 3.68 [.145] CATHODE 8.13 [.320] .508 SQ. [.020] 2.54 [.100] 2.6 [.102] MAX 4.44 [.175] RECOMMENDED P.C. BOARD LAYOUT 1.0 [.040] Top LED .254 [.100] Red/Yel Cathode for Bicolor CATHODE ID 3m m LED C BI C ircuit Board Indicator Bi-level 553-xxxx Dimensions in mm [inches] PAR T N O . C O LO R * H IG H EFFIC IEN C Y - LED TYPE 01 553-0111 Red 553-0122 Green 553-0133 Yellow 553-0177 Orange 553-0188 Blue LO W C U R R EN T - LED TYPE 02 553-0211 Red 553-0222 Green 553-0233 Yellow R ESISTO R 5 VO LTS - LED TYPE 03 553-0311 Red 553-0322 Green 553-0333 Yellow BI-C O LO R - LED TYPE 07 553-0711 Red/Green 553-0744 Yellow/Green N O N -D IFFU SED - LED TYPE 22 553-2211 Red 553-2222 Green 553-2233 Yellow * Top-Bottom LED Standard Polarity shown in drawing: Cathode right To order any of the 553-xxxx part num bers w ith R everse Polarity (C athode Left), please add -010 to the part num bers show n above. Top Position Color Bottom Position Color Color = 0) Blank 1) Red or Red/Green Bi-Color 2) Green 3) Yellow 4) Yellow/Green Bi-Color 7) Orange 8) Blue 5 5 3 x x x x 0 1 0 Reverse Polarity Option 1) Cathode Left –010 Ordering Code Suffix required ONLY for Reverse Polarity Option LED Type PAR T N U M BER O R D ER IN G C O D E Series – – NEW ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES

4-29Dialight Corporation  1501 Route 34 South  Farmingdale, NJ 07727  TEL: (732) 919-3119  FAX: (732) 751-5778 www.dialight.com P eak IV V F Test V iew ing LE D P art N um ber C olor W avelength nm m cd V olts C urrent (m A ) A ngle 2ΘΘ½ D ata sheet P age # 553-0111 Red 650 10 2 10 45° 521-9427 4-64 553-0122 Green 563 16 2.1 10 45° 521-9408 4-64 553-0133 Yellow 585 6.3 2.1 10 45° 521-9428 4-64 553-0177 Orange 600 7 2.2 10 60° 521-9498 4-58 553-0188 Blue 428 12 3.5 10 70° 521-9831 4-57 553-xxxx H IG H EFFIC IEN C Y P eak IV V F Test V iew ing LE D P art N um ber C olor W avelength nm m cd V olts C urrent (m A ) A ngle 2ΘΘ½ D ata sheet P age # 553-0211 Red 635 1.6 1.7 2 60° 521-9324 4-60 553-0222 Green 565 1.6 1.9 2 60° 521-9326 4-60 553-0233 Yellow 585 1.6 1.8 2 60° 521-9325 4-60 LO W C U R R EN T P eak IV Test Forw ard V iew ing LE D P art N um ber C olor W avelength nm m cd V oltage C urrent (m A ) A ngle 2ΘΘ½ D ata sheet P age # 553-0311 Red 635 29 5 10 60° 521-9215 4-59 553-0322 Green 565 19 5 10 60° 521-9323 4-59 553-0333 Yellow 585 12.6 5 10 60° 521-9322 4-59 IN TEG R AL R ESISTO R , 5 VO LTS P eak IV V F Test V iew ing LE D P art N um ber C olor W avelength nm m cd V olts C urrent (m A ) A ngle 2ΘΘ½ D ata sheet P age # 553-0711 Red/Green 635/565 4.7/10 2/2.1 10 50° 521-9459 4-63 553-0744 Yellow/Green 585/565 4.3/6.3 2.1*/2.1* 10 80° 521-9478 4-62 BI-C O LO R C BI AR R AYS .200 PITC H Dialight offers its Multiarray to reduce insertions and to assure indicator alignment. Multiarrays mount indicators on .200 centers. These assemblies are available in arrays of 2 to 6. See pages 4-41 and 4-42 for information. Call factory for information on .185 pitched arrays. P eak IV V F Test V iew ing LE D P art N um ber C olor W avelength nm m cd V olts* C urrent (m A ) A ngle 2ΘΘ½ D ata sheet P age # 553-2211 Red 635 29 2 10 45° 521-9432 4-61 553-2222 Green 565 50 2.1 10 45° 521-9430 4-61 553-2233 Yellow 585 20 2.1 10 45° 521-9431 4-61 N O N -D IFFU SED Typical O perating C haracteristics (TA=25°C) See LED data sheet for additional inform ation See page 4-70 and 4-71 for Reference O nly LED Drive Circuit Exam ples. See page 4-72 for Pin O ut * IF = 20mA * IF = 20mA

4-57Dialight Corporation  1501 Route 34 South  Farmingdale, NJ 07727  TEL: (732) 919-3119  FAX: (732) 751-5778 www.dialight.com 3m m D iscrete LED Tinted, D iffused 521-9831 3.4 [.134] 3.1 [.122] 0.6 [.024] 0.4 [.016] ø2.9 [.114] 2.7 [.106] 4.8 [.189] 4.4 [.173] 3.7 [.145] 3.5 [.138] 6.1 [.240] 5.7 [.224] 29 [1.142] 27 [1.063] 1.8 [.071] 1.2 [.047] CATHODE 2.54 [.100] 0.6 [.024] 0.4 [.016] 0.7 [.028] 0.4 [.016] 4.8 [.189] 4.4 [.173] SURFACE NOT FLAT PAR T N O . C O LO R 521-9831 Blue ³ Blue ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9831 Power Dissipation (mW) 100 Forward Current (mA) 20 Derating (mA/°C)From 55°C .44 Operating Temperature (°C) -40/+100 Storage Temperature (°C) -40/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Blue OPERATING CHARACTERISTICS (TA=25°C) -9831 Luminous Intensity (mcd) Min. 6.3 IF=10mA Typical 12 Peak Wavelength (nm) Typical 428 λ Peak Viewing Angle (2Θ½) Typical 70° Forward Voltage (V) Typical 3.5 IF=10mA Max. 4.2 Reverse Voltage (V) IR=10µA Min. 3 Dimensions in mm [inches] Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Solder Adherence per MIL-STD-202E, Method 208C M O U N TIN G C LIP: 515-0006 located on page 4-65 ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES NEW

4-58 Dialight Corporation  1501 Route 34 South  Farmingdale, NJ 07727  TEL: (732) 919-3119  FAX: (732) 751-5778 www.dialight.com Green Yellow Red Orange Red ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9210 -9211 -9216 -9498 -9636 Power Dissipation (mW) 100 60 100 135 100 Forward Current (mA) 30 20 30 25 40 Operating Temperature (°C) -55/+100 -55/+100 -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 -55/+100 -55/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from body 3m m D iscrete LED H igh Efficiency D iffused 521-9210, -9211, -9216, -9498, -9636 4.45 [.175] 1.02 [.040] 3.00 [.118] 1.50 [.059] MAX 6.00 [.236] 25.4 [1.0] MIN 1.02 [.040] MIN .45 [.016 ] .40 [.016] 2.54 [.100] 3.30 [.13] PAR T N O . C O LO R 521-9210 Green 521-9211 Yellow 521-9216 Red 521-9498 Orange 521-9636 Red Green Yellow Red Orange Red OPERATING CHARACTERISTICS (TA=25°C) -9210 -9211 -9216 -9498 -9636 IF=10mA 1 IF=20mA Typical 12.6 10 10 7 48 1 Peak Wavelength (nm) Typical 565 585 635 600 660 λ Peak Viewing Angle (2Θ ½ ) Typical 60° 60° 60° 60° 60° Forward Voltage (V) Typical 2.1 1 2.11 21 2.2 1.8 1 Reverse Voltage (V), IR =100µA Max. 5 5 5 5 4 Dimensions in mm [inches] Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Solder Adherence per MIL-STD-202E, Method 208C M O U N TIN G C LIP: 515-0006 located on page 4-65 short lead cathode all colors except 521-9636 Red. For 521-9636 Red, short lead is anode. NEW

4-59Dialight Corporation  1501 Route 34 South  Farmingdale, NJ 07727  TEL: (732) 919-3119  FAX: (732) 751-5778 www.dialight.com 3m m D iscrete LED Integral R esistor, 5V D iffused 521-9215, -9322, -9323 4.40 [.175] 2.54 [.100] 2.90 [.115] 3.20 [.125] 1.01 [.040] 1.27 [.050] .457 [.018] SQ. CATHODE 1.0 [.040] PAR T N O . C O LO R 521-9215 Red 521-9322 Yellow 521-9323 Green Red Yellow Green ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9215 -9322 -9323 Forward Voltage (V) 7.5 7.5 7.5 Derating (V/°C) From 50°C .086 .086 .071 Operating Temperature (°C) -40/+85 -40/+85 -20/+85 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Red Yellow Green OPERATING CHARACTERISTICS (TA=25°C) -9215 -9322 -9323 Luminous Intensity (mcd) Min. 8.7 3.7 5.6 VF=5V Typical 29 12.6 19 Peak Wavelength (nm) Typical 635 585 565 λ Peak Viewing Angle (2Θ½) Typical 60° 60° 60° Forward Current (mA) Typical 10 10 10 VF=5V Max. 20 20 20 Reverse Voltage (V), IR =100µA Min. 5 5 5 Dimensions in mm [inches] Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Solder Adherence per MIL-STD-202E, Method 208C M O U N TIN G C LIP: 515-0006 located on page 4-65

4-60 Dialight Corporation  1501 Route 34 South  Farmingdale, NJ 07727  TEL: (732) 919-3119  FAX: (732) 751-5778 www.dialight.com 3m m D iscrete LED Low C urrent D iffused 521-9324, -9325, -9326 4.4 [.175] 1.01 [.040] 5.97 [.235] 26.67 [1.05] MIN. 1.00 [.040] .40 [.016] 3.3 [.130] 2.54 [.100] .40 [.016] CATHODE 1.0 [.040] PAR T N O . C O LO R 521-9324 Red 521-9325 Yellow 521-9326 Green Red Yellow Green ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9324 -9325 -9326 Power Dissipation (mW) 20 20 20 Forward Current (mA) 7 7 7 Derating (mA/°C) From 90°C .7 .7 .7 Peak Current (mA) 500 500 500 Pulse width = 10 µs Operating Temperature (°C) -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Red Yellow Green OPERATING CHARACTERISTICS (TA=25°C) -9324 -9325 -9326 Luminous Intensity (mcd) Min. 1 1 1 IF=2mA Typical 1.6 1.6 1.6 Peak Wavelength (nm) Typical 635 585 565 λ Peak Viewing Angle (2Θ ½ ) Typical 60° 60° 60° Forward Voltage (V) Typical 1.7 1.8 1.9 IF=2mA Max. 2.2 2.7 2.2 Reverse Voltage (V), IR =50µA Min. 5 5 5 Dimensions in mm [inches] Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Solder Adherence per MIL-STD-202E, Method 208C M O U N TIN G C LIP: 515-0006 located on page 4-65

4-61Dialight Corporation  1501 Route 34 South  Farmingdale, NJ 07727  TEL: (732) 919-3119  FAX: (732) 751-5778 www.dialight.com 3m m D iscrete LED H igh Efficiency Tinted, N on-D iffused 521-9430, -9431, -9432 3.0 [.118] 4.44 [.175] 1.0 [.040]

5.97 MAX

[.235] 25.4 [.100] MIN 1.27 [.050] .457 [.018] 3.2 [.126] 2.54 [.100] .40 [.016] CATHOD E 1.0 [.040] PAR T N O . C O LO R 521-9430 Green 521-9431 Yellow 521-9432 Red Green Yellow Red ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9430 -9431 -9432 Power Dissipation (mW) 100 60 100 Forward Current (mA) 30 20 30 Derating (mA/°C)From 50°C .4 .25 .4 Peak Current (mA) 120 80 120 Pulse width = 100µs Operating Temperature (°C) -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Green Yellow Red OPERATING CHARACTERISTICS (TA=25°C) -9430 -9431 -9432 Luminous Intensity (mcd) Min. 32 10 8.7 IF=10mA Typical 50 20 29 Peak Wavelength (nm) Typical 565 585 635 λ Peak Viewing Angle (2Θ½) Typical 45° 45° 45° Forward Voltage (V) Typical 2.1 2.1 2 IF=20mA Max. 2.8 2.8 2.8 Dimensions in mm [inches] Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Solder Adherence per MIL-STD-202E, Method 208C M O U N TIN G C LIP: 515-0006 located on page 4-65

4-62 Dialight Corporation  1501 Route 34 South  Farmingdale, NJ 07727  TEL: (732) 919-3119  FAX: (732) 751-5778 www.dialight.com 3m m D iscrete LED Bi-C olor N on-Tinted, D iffused 521-9478, -9628, -9768 3.20 [.126] MAX 4.45 [.175] 5.20 ±.5 [.205 ±.02] 1.02 [.040] 3.00 [.118] 25.40 [1.00] MIN RED CATHODE 521-9768 YELLOW CATHODE 521-9478 GREEN CATHODE 521-9628 .50 [.020] TYP 2.54 [.100] NOM 2.54 [.100] NOTE: MENISCUS MAY EXTEND 1.0MM [.040] DOWN FROM HOUSING PAR T N O . C O LO R 521-9478 Yellow/Green 521-9628 Red/Green 521-9768 Red/Yellow Yellow/Green Red/Green Red/Yellow ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9478 -9628 -9768 Power Dissipation (mW) 60/100 140/100 100/60 Forward Current (mA) 20/30 40/30 30/20 Peak Current (mA) 80/120 200/120 120/80 Pulse width = 10µs Operating Temperature (°C) -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 Soldering Temperature 260°C, 5 seconds, 1.66 mm from case Yellow/Green Red/Green Red/Yellow OPERATING CHARACTERISTICS (TA=25°C) -9478 -9628 -9768 Peak Wavelength (nm) Typical 585/565 660/565 630/585 λ Peak Viewing Angle (2Θ ½ ) Typical 80° 200° 80° Reverse Voltage (V) IR =100ua Min. 5 5 5 Dimensions in mm [inches] Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Solder Adherence per MIL-STD-202E, Method 208C M O U N TIN G C LIP: 515-0006 located on page 4-65

4-63Dialight Corporation  1501 Route 34 South  Farmingdale, NJ 07727  TEL: (732) 919-3119  FAX: (732) 751-5778 www.dialight.com 3m m D iscrete LED Bi-C olor N on-Tinted, D iffused 521-9459 2.54 [.100] 3.00 [.118] 4.59 [.181] 6.10 [.240] .50 [.020] SQ. NOM. 26.92 [1.06] MIN 3.40 [.134] MAX CATHODE GREEN 1.80 [.071] MAX 4.0 [.158] 1.0 [.040] PAR T N O . C O LO R 521-9459 Red/Green Red/Green ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9459 Power Dissipation (mW) 140 Forward Current (mA) 45 Derating (mA/°C)From 25°C .6 Peak Current (mA) 1000 Pulse width = 10µs Operating Temperature (°C) -55/+100 Storage Temperature (°C) -55/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Red/Green OPERATING CHARACTERISTICS (TA=25°C) -9459 Luminous Intensity (mcd) Min. 2.5/3.7 IF=10mA Typical 4.7/10 Peak Wavelength (nm) Typical 635/565 λ Peak Viewing Angle (2Θ½) Typical 50° Forward Voltage (V) Typical 2/2.1 IF=10mA Max. 2.8/2.8 Dimensions in mm [inches] Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Solder Adherence per MIL-STD-202E, Method 208C M O U N TIN G C LIP: 515-0006 located on page 4-65

4-64 Dialight Corporation  1501 Route 34 South  Farmingdale, NJ 07727  TEL: (732) 919-3119  FAX: (732) 751-5778 www.dialight.com 3m m D iscrete LED H igh Efficiency D iffused 521-94xx TYPE C O LO R 521-9408 Green 521-9427 Red 521-9428 Yellow Green Red Yellow ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9408 -9427 -9428 Power Dissipation (mW) 75 60 60 Forward Current (mA) 25 20 20 Derating (mA/°C) From 50°C .5 .5 .5 Peak Current (mA) 60 60 60 Operating Temperature (°C) -25/+85 -25/+85 -25/+85 Storage Temperature (°C) -30/+100 -30/+100 -30/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Green Red Yellow OPERATING CHARACTERISTICS (TA=25°C) -9408 -9427 -9428 Luminous Intensity (mcd) Min. 5.6 3.6 2.2 IF=10mA Typical 16 10 6.3 Peak Wavelength (nm) Typical 563 650 585 λ Peak Viewing Angle (2Θ ½ ) Typical 45° 45° 45° Forward Voltage (V) Typical 2.1 2 2.1 IF=10mA Max. 3 3 3 Reverse Voltage (V), IR =10µA Min. 3 3 3 .50 [.020] NOM 1.30 ±.25 [.051 ±.010] 24.00 ±.25 [.945 ±.010] 4.70 ±.20 [.185 ±.008] 3.09 ±.20 [.122 ±.008] 6.10 ±.38 [.240 ±.015] .79 ±.20 [.031 ±.008] 3.30 [.130] MAX .50 [.020] NOM 2.49 ±.25 [.098 ±.010] CATHODE (– ) 1.0 [.040] Θ  is the off axis angle at which the luminous intensity is half the axial luminous intensity Solder Adherence per MIL-STD-202E, Method 208C Dimensions in mm [inches] M O U N TIN G C LIP: 515-0006 located on page 4-65