54F258ADM

54F258ADM NSC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Features

Y Multiplexer expansion by tying outputs together Y Inverting TRI-STATE outputs Y Guaranteed 4000V minimum ESD protection Commercial Military Package Package DescriptionNumber 74F258APC N16E 16-Lead (0.300 × Wide) Molded Dual-In-Line 54F258ADM (Note 2) J16A 16-Lead Ceramic Dual-In-Line 74F258ASC (Note 1) M16A 16-Lead (0.150 × Wide) Molded Small Outline, JEDEC 74F258ASJ (Note 1) M16D 16-Lead (0.300 × Wide) Molded Small Outline, EIAJ 54F258AFM (Note 2) W16A 16-Lead Cerpack 54F258ALL (Note 2) E20A 20-Lead Ceramic Leadless Chip Carrier, Type C Note 1: Devices also available in 13 × reel. Use suffix e SCX and SJX. Note 2: Military grade device with environmental and burn-in processing. Use suffix e DMQB, FMQB and LMQB. Logic Symbols Connection Diagrams TL/F/9508–3 IEEE/IEC TL/F/9508–5 Pin Assignment for DIP, SOIC and Flatpak TL/F/9508–1 Pin Assignment for LCC TL/F/9508–2 TRI-STATEÉ is a registered trademark of National Semiconductor Corporation. C1995 National Semiconductor Corporation RRD-B30M75/Printed in U. S. A.

Pin Names Description U.L. Input I IH/IIL HIGH/LOW Output I OH/IOL S Common Data Select Input 1.0/1.0 20 mA/b0.6 mA OE TRI-STATE Output Enable Input (Active LOW) 1.0/1.0 20 mA/b0.6 mA I0a –I0d Data Inputs from Source 0 1.0/1.0 20 mA/b0.6 mA I1a –I1d Data Inputs from Source 1 1.0/1.0 20 mA/b0.6 mA Za –Zd TRI-STATE Inverting Data Outputs 150/40 (33.3) b3 mA/24 mA (20 mA) Functional Description The ’F258A is a quad 2-input multiplexer with TRI-STATE outputs. It selects four bits of data from two sources under control of a common Select input (S). When the Select input is LOW, the I 0x inputs are selected and when Select is HIGH, the I 1x inputs are selected. The data on the selected inputs appears at the outputs in inverted form. The ’F258A is the logic implementation of a 4-pole, 2-position switch where the position of the switch is determined by the logic levels supplied to the Select input. The logic equation for the outputs is shown below: Z n e OE # (I1n # S a I0n # S) When the Output Enable input (OE ) is HIGH, the outputs are forced to a high impedance OFF state. If the outputs of the TRI-STATE devices are tied together, all but one device must be in the high impedance state to avoid high currents that would exceed the maximum ratings. Designers should ensure that Output Enable signals to TRI-STATE devices whose outputs are tied together are designed so there is no overlap. Truth Table Output Select Data OutputEnable Input Inputs OE SI 0 I1 Z H e HIGH Voltage Level L e LOW Voltage LevelHX X X Z X e ImmaterialLH X L H Z e High Impedance LH X H L LL L X H LL H X L Logic Diagram TL/F/9508–4 Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.

Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Storage Temperature b65§Ct o a150§C Ambient Temperature under Bias b55§Ct o a125§C Junction Temperature under Bias b55§Ct o a175§C Plastic b55§Ct o a150§C VCC Pin Potential to Ground Pin b0.5V to a7.0V Input Voltage (Note 2) b0.5V to a7.0V Input Current (Note 2) b30 mA to a5.0 mA Voltage Applied to Output in HIGH State (with V CC e 0V) Standard Output b0.5V to V CC TRI-STATE Output b0.5V to a5.5V Current Applied to Output in LOW State (Max) twice the rated I OL (mA) ESD Last Passing Voltage (Min) 4000V Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Military b55§Ct o a125§C Commercial 0 §Ct o a70§C Supply Voltage Military a4.5V to a5.5V Commercial a4.5V to a5.5V Symbol Parameter 54F/74F Units V CC Conditions Min Typ Max VIH Input HIGH Voltage 2.0 V Recognized as a HIGH Signal VIL Input LOW Voltage 0.8 V Recognized as a LOW Signal VCD Input Clamp Diode Voltage b1.2 V Min I IN eb 18 mA VOH Output HIGH 54F 10% V CC 2.5 I OH eb 1m A Voltage 54F 10% V CC 2.4 I OH eb 3m A 74F 10% V CC 2.5 V Min IOH eb 1m A 74F 10% V CC 2.4 I OH eb 3m A 74F 5% V CC 2.7 I OH eb 1m A 74F 5% V CC 2.7 I OH eb 3m A VOL Output LOW 54F 10% V CC 0.5 V Min IOL e 20 mA Voltage 74F 10% V CC 0.5 I OL e 24 mA IIH Input HIGH 54F 20.0 mA Max VIN e 2.7V Current 74F 5.0 IBVI Input HIGH Current 54F 100 mA Max VIN e 7.0V Breakdown Test 74F 7.0 ICEX Output HIGH 54F 250 mA Max VOUT e VCC Leakage Current 74F 50 VID Input Leakage 74F 4.75 V 0.0 IID e 1.9 mA Test All Other Pins Grounded IOD Output Leakage 74F 3.75 mA 0.0 VIOD e 150 mV Circuit Current All Other Pins Grounded IIL Input LOW Current b0.6 mA Max V IN e 0.5V IOZH Output Leakage Current 50 mA Max V OUT e 2.7V IOZL Output Leakage Current b50 mA Max V OUT e 0.5V IOS Output Short-Circuit Current b60 b150 mA Max V OUT e 0V IZZ Bus Drainage Test 500 mA 0.0V V OUT e VCC ICCH Power Supply Current 6.2 9.5 mA Max V O e HIGH ICCL Power Supply Current 15.1 23 mA Max V O e LOW ICCZ Power Supply Current 11.3 17 mA Max V O e HIGH Z

TA ea 25§C TA,V CC e Mil T A,V CC e ComSymbol Parameter V CC ea 5.0V CL e 50 pF C L e 50 pF Units CL e 50 pF Min Typ Max Min Max Min Max ns

Ordering Information

The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: 74F 258A S C X Temperature Range Family Special Variations 74FeCommercial X e Devices shipped in 13 × reels 54FeMilitary QB e Military grade with environmental and burn-in Device Type processing shipped in tubes Package Code Temperature RangeP e Plastic DIP C e Commercial (0 §Ct o a70§C)D e Ceramic DIP M e Military ( b55§Ct o a125§C)F e Flatpak L e Leadless Ceramic Chip Carrier (LCC) S e Small Outline SOIC JEDEC SJ e Small Outline SOIC EIAJ Physical Dimensions inches (millimeters) 20-Lead Ceramic Leadless Chip Carrier (L)

Physical Dimensions inches (millimeters) (Continued) 16-Lead Ceramic Dual-In-Line Package (D) 16-Lead (0.150 × Wide) Molded Small Outline Package, JEDEC (S)

Physical Dimensions inches (millimeters) (Continued) 16-Lead (0.300 × Wide) Molded Small Outline Package, EIAJ (SJ) 16-Lead (0.300 × Wide) Molded Dual-In-Line Package (P)

54F/74F258A Quad 2-Input Multiplexer with TRI-STATE Outputs Physical Dimensions inches (millimeters) (Continued) 16-Lead Ceramic Flatpak (F) LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant support device or system whose failure to perform can into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life failure to perform, when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can effectiveness. be reasonably expected to result in a significant injury to the user. National Semiconductor National Semiconductor National Semiconductor National Semiconductor National Semiconductores National Semiconductor Corporation GmbH Japan Ltd. Hong Kong Ltd. Do Brazil Ltda. (Australia) Pty, Ltd. 2900 Semiconductor Drive Livry-Gargan-Str. 10 Sumitomo Chemical 13th Floor, Straight Block, Rue Deputado Lacorda Franco Building 16 P.O. Box 58090 D-82256 F 4urstenfeldbruck Engineering Center Ocean Centre, 5 Canton Rd. 120-3A Business Park Drive Santa Clara, CA 95052-8090 Germany Bldg. 7F Tsimshatsui, Kowloon Sao Paulo-SP Monash Business Park Tel: 1(800) 272-9959 Tel: (81-41) 35-0 1-7-1, Nakase, Mihama-Ku Hong Kong Brazil 05418-000 Nottinghill, Melbourne TWX: (910) 339-9240 Telex: 527649 Chiba-City, Tel: (852) 2737-1600 Tel: (55-11) 212-5066 Victoria 3168 Australia Fax: (81-41) 35-1 Ciba Prefecture 261 Fax: (852) 2736-9960 Telex: 391-1131931 NSBR BR Tel: (3) 558-9999 Tel: (043) 299-2300 Fax: (55-11) 212-1181 Fax: (3) 558-9998 Fax: (043) 299-2500 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.