54AC157 NSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

n ICC and IOZ reduced by 50% n Outputs source/sink 24 mA n ’ACT157 has TTL-compatible inputs n Standard Microcircuit Drawing (SMD) — ’AC157: 5962-89539 — ’ACT157: 5962-89688 Logic Symbols Pin Names Description I0a–I0d Source 0 Data Inputs I1a–I1d Source 1 Data Inputs E Enable Input S Select Input Z a–Zd Outputs Connection Diagrams FACT ™ is a trademark of Fairchild Semiconductor Corporation. DS100272-1 IEEE/IEC DS100272-2 Pin Assignment for DIP and Flatpak DS100272-3 Pin Assignment for LCC DS100272-4 July 1998 54AC157•54ACT157 Quad 2-Input Multiplexer © 1998 National Semiconductor Corporation DS100272 www.national.com

The ’AC/’ACT157 is a quad 2-input multiplexer. It selects four bits of data from two sources under the control of a com- mon Select input (S). The Enable input (E) is active-LOW. When E is HIGH, all of the outputs (Z) are forced LOW re- gardless of all other inputs. The ’AC/’ACT157 is the logic implementation of a 4-pole, 2-position switch where the posi- tion of the switch is determined by the logic levels supplied to the Select input. The logic equations for the outputs are shown below: Z a = E • (I1a • S+I 0a • S) Zb = E • (I1b • S+I 0b • S) Zc = E • (I1c • S+I 0c • S) Zd = E • (I1d • S+I 0d • S) A common use of the ’AC/ACT157 is the moving of data from two groups of registers to four common output busses. The particular register from which the data comes is determined by the state of the Select input. A less obvious use is as a function generator. The ’AC/’ACT157 can generate any four of the sixteen different functions of two variables with one variable common. This is useful for implementing gating functions. Truth Table Inputs Outputs E SI 0 I1 Z HX X X L LH X L L LH X H H LL L X L LL H X H H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Logic Diagram DS100272-5 Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.national.com 2

Absolute Maximum Ratings(Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (V CC ) −0.5V to +7.0V DC Input Diode Current (IIK) VI = −0.5V −20 mA VI = VCC + 0.5V +20 mA DC Input Voltage (VI) −0.5V to V CC + 0.5V DC Output Diode Current (IOK ) VO = −0.5V −20 mA VO = VCC + 0.5V +20 mA DC Output Voltage (VO ) −0.5V to V CC + 0.5V DC Output Source or Sink Current (IO ) ±50 mA DC V CC or Ground Current per Output Pin (ICC or IGND ) ±50 mA Storage Temperature (TSTG ) −65˚C to +150˚C Junction Temperature (TJ) CDIP 175˚C Recommended Operating Conditions Supply Voltage (VCC ) ’AC 2.0V to 6.0V ’ACT 4.5V to 5.5V Input Voltage (V I) 0 Vt oV CC Output Voltage (VO ) 0 Vt oV CC Operating Temperature (TA) 54AC/ACT −55˚C to +125˚C Minimum Input Edge Rate (ΔV/Δt) ’AC Devices V IN from 30% to 70% of VCC VCC @ 3.3V, 4.5V, 5.5V 125 mV/ns Minimum Input Edge Rate (ΔV/Δt) ’ACT Devices V IN from 0.8V to 2.0V VCC @ 4.5V, 5.5V 125 mV/ns Note 1:Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recom- mend operation of FACT ™ circuits outside databook specifications. DC Characteristics for ’AC Family Devices 54AC Symbol Parameter V CC TA = Units Conditions (V) −55˚C to +125˚C Guaranteed Limits VIH Minimum High Level 3.0 2.1 V OUT = 0.1V Input Voltage 4.5 3.15 V or V CC − 0.1V 5.5 3.85 VIL Maximum Low Level 3.0 0.9 V OUT = 0.1V Input Voltage 4.5 1.35 V or V CC − 0.1V 5.5 1.65 VOH Minimum High Level 3.0 2.9 I OUT = −50 µA Output Voltage 4.5 4.4 V 5.5 5.4 (Note 2) VIN = VIL or VIH 3.0 2.4 I OH = −12 mA 4.5 3.7 V I OH = −24 mA 5.5 4.7 I OH = −24 mA VOL Maximum Low Level 3.0 0.1 I OUT = 50 µA Output Voltage 4.5 0.1 V 5.5 0.1 (Note 2) VIN = VIL or VIH 3.0 0.50 I OL = 12 mA 4.5 0.50 V I OL = 24 mA 5.5 0.50 I OL = 24 mA IIN Maximum Input 5.5 ±1.0 µA V I = VCC , GND Leakage Current IOLD Minimum Dynamic Output Current (Note 3) 5.5 50 mA V OLD = 1.65V Max IOHD 5.5 −50 mA V OHD = 3.85V Min 3 www.national.com

DC Characteristics for ’AC Family Devices(Continued) 54AC Symbol Parameter V CC TA = Units Conditions (V) −55˚C to +125˚C Guaranteed Limits ICC Maximum Quiescent 5.5 80.0 µA V IN = VCC Supply Current or GND Note 2:All outputs loaded; thresholds on input associated with output under test. Note 3:Maximum test duration 2.0 ms, one output loaded at a time. Note 4:IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit@ 5.5V VCC . ICC for 54AC@ 25˚C is identical to 74AC@ 25˚C. DC Characteristics for ’ACT Family Devices 54ACT Symbol Parameter V CC TA = Units Conditions (V) −55˚C to +125˚C Guaranteed Limits VIH Minimum High Level 4.5 2.0 V V OUT = 0.1V Input Voltage 5.5 2.0 or V CC − 0.1V VIL Maximum Low Level 4.5 0.8 V V OUT = 0.1V Input Voltage 5.5 0.8 or V CC − 0.1V VOH Minimum High Level 4.5 4.4 V I OUT = −50 µA Output Voltage 5.5 5.4 (Note 5) VIN = VIL or VIH 4.5 3.70 V I OH = −24 mA 5.5 4.70 I OH = −24 mA VOL Maximum Low Level 4.5 0.1 V I OUT = 50 µA Output Voltage 5.5 0.1 (Note 5) VIN = VIL or VIH 4.5 0.50 V I OL = 24 mA 5.5 0.50 I OL = 24 mA IIN Maximum Input 5.5 ±1.0 µA V I = VCC , GND Leakage Current ICCT Maximum 5.5 1.6 mA V I = VCC − 2.1V ICC /Input IOLD Minimum Dynamic 5.5 50 mA V OLD = 1.65V Max IOHD Output Current (Note 6) 5.5 −50 mA V OHD = 3.85V Min ICC Maximum Quiescent 5.5 80.0 µA V IN = VCC Supply Current or GND Note 5:All outputs loaded; thresholds on input associated with output under test. Note 6:Maximum test duration 2.0 ms, one output loaded at a time. Note 7:ICC for 54ACT@ 25˚C is identical to 74ACT@ 25˚C. www.national.com 4

VCC TA = −55˚C Symbol Parameter (V) to +125˚C Units (Note 8) C L = 50 pF Min Max tPLH Propagation Delay 3.3 1.0 16.0 ns St oZ n 5.0 1.0 12.0 tPHL Propagation Delay 3.3 1.0 14.0 ns St oZ n 5.0 1.0 11.5 tPLH Propagation Delay 3.3 1.0 16.0 ns Et oZ n 5.0 1.0 12.0 tPHL Propagation Delay 3.3 1.0 14.0 ns Et oZ n 5.0 1.0 11.5 tPLH Propagation Delay 3.3 1.0 11.0 ns I n to Zn 5.0 1.0 9.0 tPHL Propagation Delay 3.3 1.0 11.0 ns I n to Zn 5.0 1.0 9.0 Note 8:Voltage Range 3.3 is 3.3V±0.3V Voltage Range 5.0 is 5.0V±0.5V 54ACT VCC TA = −55˚C Symbol Parameter (V) to +125˚C Units (Note 9) C L = 50 pF Min Max tPLH Propagation Delay 5.0 1.0 11.5 ns St oZ n tPHL Propagation Delay 5.0 1.0 11.5 ns St oZ n tPLH Propagation Delay 5.0 1.0 12.0 ns Et oZ n tPHL Propagation Delay 5.0 1.0 10.0 ns Et oZ n tPLH Propagation Delay 5.0 1.0 8.5 ns I n to Zn tPHL Propagation Delay 5.0 1.0 9.0 ns I n to Zn Note 9:Voltage Range 5.0 is 5.0V±0.5V Capacitance Symbol Parameter Typ Units Conditions C IN Input Capacitance 4.5 pF V CC = OPEN C PD Power Dissipation 50.0 pF V CC = 5.0V Capacitance 5 www.national.com

Physical Dimensionsinches (millimeters) unless otherwise noted

20 Terminal Ceramic Leadless Chip Carrier (L)

16-Lead Ceramic Dual-In-Line Package (D) 7 www.national.com

Physical Dimensionsinches (millimeters) unless otherwise noted (Continued) LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE- VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMI- CONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or sys- tems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose fail- ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 16-Lead Ceramic Flatpak (F) 54AC157 • 54ACT157 Quad 2-Input Multiplexer National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.