5406-0 POMONA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- Designed to fit on the end of any 22 AWG to 18 AWG wire.
- Cross hole wire entry fits wires up to .12” (3mm) diameter.
- Available with tarnish resistant nickel or gold plating for very low contact resistance.
- Model 5230 is rated to temperatures up to +302°F (+150°C).
- Set screw simplifies assembly of test leads and jumpers by using a flat blade screwdriver.
- Fits standard panel and binding post banana jacks .161” to .166” (4,0mm to 4,2mm) dia Materials Banana Jack: Beryllium Copper, Gold Plated Banana Plug: Body – Brass, Nickel Plated (Model 5406 is Gold Plated) Spring – Beryllium Copper, Nickel Plated (Model 5406 Gold Plated) Insulation: Polypropylene (Model 5230 is Polyphenylene Sulfide) Set Screw: Steel, Zinc Plated, 8-32 Single Slot Ratings Voltage: For CE compliance and for personal safety, do not hold in hand when voltages exceed 33 Vrms/70 Vdc. Maximum voltage for hands free use in controlled testing environments: 5000 Vrms Max. Do not use on circuits where transient stresses can exceed the rated voltage. Current: 15 Amps Maximum Operating Temperature: +122ºF (+50 ºC) max. (Model 5230: +302ºF (+150ºC) max.)
Ordering Information
Model: 1325- color Nickel Plated Banana with Polypropylene Insulation Color: 0=Black, 1=Brown, 2=Red, 3=Orange, 4=Yellow, 5=Green, 6=Blue, 7=Violet, 8=Gray, 9=White, 02=set of Black and Red Ordering example: 1325-5 (1325 with Green Polypropylene Insulation) Model: 5406-0 Gold Plated Banana Plug with Polypropylene Black Insulation Model: 5406-2 Gold Plated Banana Plug with Polypropylene Red Insulation Model: 5230-0 Nickel Plated Banana with High Temp erature Black Insulation (Polyphenylene Sulfide) Model: 5230-6 Nickel Plated Banana with High Te mperature Blue Insulation (Polyphenylene Sulfide) Model: 6546 Package of ten 1325, one of each color. Model: 4914 Replacement Set Screws, package of 100.