5320 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Extended Operating Life 1 million plus operational cycles
  • Fully Sealed Construction Meets or exceeds IP66/IP67 standards
  • Extended Temperature Range Operating: -40º to +125ºC Storage: -55º to +150ºC
  • High Quality, Rugged Construction Stainless Steel Shaft, Nickel Plated Brass Bushing
  • Wide Range of Configurations (see ordering info) Shaft and Bushing Lengths Linearity (accuracy) Tolerance Limits With or Without Detent Function Total Resistance Custom Options Available The 5320 Series offers a highly reliable rotary potentiometer sensor that can be easily integrated or re-packaged into a wide variety of existing and new applications. The 5320 Series is ideally suited for tight packaging constraints while providing superior durability, long service life and repeatable accuracy. The sensor is fully sealed and impervious to contamination and moisture. A wide variety of standard and non-standard options are available including detent functions, electrical/mechanical angles, shaft/bushing sizes, lengths and configurations, resistance values, etc. The 5320 Series standard termination offers gold plated through holes for direct soldering. Options are also available for custom termination methods The 5320 series sensors offer all of the advantages of a cost effective, traditional potentiometer while providing a rugged, compact, low-profile design to survive the harshest conditions. Mechanical Total Travel (stop to stop) 250 degrees Stop Strength 1350 Nmm (190 in-oz) Shaft Pull Out Strength 200N (45lbs) Shaft Operating Torque 5-25 Nmm (0.7-3.5 in-oz) Shaft Starting Torque 35 Nmm (5 in-oz) Max. Cycle Life 1 Million cycles Detent Life 10,000 cycles Detent Torque 35-120 Nmm (5-17 in-oz) Detent Release Position 20 degrees Max.

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. Environmental Materials Basic Configurations: Shaft & Bushing Lengths Moisure & Dust Resistant Sealed, IP66/IP67 Vibration 15g, 10 to 2000 Hz Temperature -40°C to +125ºC operating, -55º to +150ºC storage Shock 30g Salt Spray 96 hours Resistance to Solder Heat 350ºC (660ºF) for 5 sec. (at termination points) Shaft Stainless Steel Bushing Nickel Plated Brass Housing (Package) Nylon 6 (Akulon) PCB 4101/21 (FR-4) Family Total Resistance Independent Linearity Detent 532X: 5321 5322 5323 Standard: 1K 10K LX.X: +/-2.0% Blank: None D: Included ORDERING OPTIONS Example : 5321 R5K L2.0 No Detent Function, Standard +/-2.0% Linearity, 5K Total Resistance 5321 5322 5323 Electrical Electrical Travel 240 degrees Active Electrical Travel 216 degrees (5%-95%) PowerRating at 70C 0.25W (derating to 0 at 125C) Resistance Tolerance ±20% Linearity, Independent ±2% (Active) RGV 100% Max. (Output Smoothness) (0.2%) Max.

BE0018-9850GII-1001 Rev.01/29/18 Americas +1 (800) 350 2727 sensors@sensata.com Europe, Middle East & Africa +33 (3) 88 20 8080 position-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Page 3 www.sensata.com CONTACT US Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. DIMENSIONS SHAFT FLAT SHOWN IN THE FULLY CCW POSITION Dimensions are shown in millimeters (in)