527-025 GLENAIR | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
www.glenair.com E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 © 2004 Glenair, Inc. Printed in U.S.A. F-6 CAGE Code 06324 “F” Entry “E” Entry “D” Entry “A” Entry “C” Entry “K” Entry “B” Entry “J” Entry “H” Entry “L” Entry “G” Entry 3 Ring Term. Shown (Note 2) 2 Ring Term. Shown (Note 2) 5.355 (136.0) 5.345 (135.8) 3.770 (95.8) 3.760 (95.5) 2.004 (50.9) 1.994 (50.6) 1.258 (32.0) 1.248 (31.7) 1.415 (35.9) 1.405 (35.7) 2.54 (64.5) Max 1.79 (45.5) 1.082 (27.5) 1.067 (27.1) .125 (3.2) Dia
10 Places
.168 (4.3) .158 (4.0) Typ. Cable Range Typ. B Typ. 5.61 (142.5) 2.09 (53.1) A 527-025 NF P1 A08 C12 D12 T S Basic Part No. Finish (Table II) Connector Designator (Table III) Entry Location (A, B, C, D, E, F , G, H, J, K, L) and Dash No. (Table I), 3 Entry Combinations Max S = Safety Wire Holes on Hex Locknuts, Omit For None Termination Style (Note 2) D = 2 Ring, T = 3 Ring 527-025 Strain Relief Backshell for Size 2 ARINC 600 Series Connectors Metric dimensions (mm) are indicated in parentheses.
www.glenair.com E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 © 2004 Glenair, Inc. Printed in U.S.A. F-7 CAGE Code 06324 1. Metric dimensions (mm) are indicated in parentheses. 2. Designate Symbol “T” (3 ring termination) for termination of individual and overall braid. Designate symbol “D” (2 ring termination) for termination of individual or overall braid. 3. Material/Finish: Backshell, Nuts, Clamps, Ferrule = Al Alloy/See Table II Hardware = SST/Passivate 527-025 Strain Relief Backshell for Size 2 ARINC 600 Series Connectors Dash No. TABLE I: CABLE ENTRY A Max .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) 1.073 (27.3) Min .157 (4.0) .187 (4.7) .281 (7.1) .344 (8.7) .375 (9.5) .438 (11.1) .562 (14.3) Max .250 (6.4) .312 (7.9) .437 (11.1) .562 (14.3) .625 (15.9) .750 (19.1) .938 (23.8) Cable Range B Max .844 (21.4) .906 (23.0) 1.093 (27.8) 1.187 (30.1) 1.281 (32.5) 1.500 (38.1) 1.719 (43.7) Symbol B J LF M N Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel TABLE II: FINISH OPTIONS *Anodize finish is not suitable for EMI shielding or grounding applications. Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. Finish Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab Symbol NC NF T U ZN TABLE III: CONNECTOR DESIGNATOR ARINC 600 series connector backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. The following should be used to determine if a backshell modification is required. Prior to ordering, consult factory with connector part numbers not shown to ensure a proper fit. Connector Designator P Connector Description All Manufacturer’s Plug and Receptacle Shells, Except for Those Listed Below (Prior to ordering, consult factory with connector part numbers not listed below to ensure a proper fit.) Cannon BKAD****322 Series Plug Cannon/Radiall Environmental Plug Cannon/Boeing BACC 66 Plug Radiall/Boeing BACC66 Plug Cannon BKAC & BKAE XXX322 Series Environmental Plug