EMMT-AS-80-S-LS-RS FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Part number: 5255425 Data sheet Feature Value Electrical connection 1, connection technology M23x1 Electrical connection 1, connection type Hybrid plug Electrical connection for input 1, connection pattern 00995913 Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N Detent torque < 1.0% of peak torque Mounting position Any Rotor position sensor for manufacturer designation ECI 1118 Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m Contamination level 2 Note on degree of protection IP40 for motor shaft without rotary shaft seal IP65 for motor shaft with rotary shaft seal IP67 for motor housing, incl. connection technology Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Measuring flange 250 x 250 x 15 mm, steel Balancing quality G 2.5 Motor type as per EN 60034-7 IM B5 IM V1 IM V3 Certificate issuing authority UL E342973 Electrical connection 1, number of pins/wires 15 Max. winding temperature 155 °C Max. installation height 4000 m Rotor position encoder for DC operating voltage 5 V Max. mechanical speed 14000 1/min Number of pole pairs 5 Storage lifetime, under nominal conditions 20000 h Electric time constant 4.9 ms Cross inductivity Lq (phase) 12.2 mH Winding longitudinal inductivity Ld (phase) 10.2 mH Rotor position encoder for DC operating voltage range 3.6 V ... 14 V Standstill torque constant 0.57 Nm/A Rotor position encoder for absolutely detectable revolutions 1 12/21/20 - Subject to change - Festo AG & Co. KG 1/2
Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec Thermal resistance 0.95 K/W Rotor position encoder for positional values per revolution 262144 Thermal time constant 42 min Type code EMMT-AS Rotor position sensor Absolute encoder, single-turn Rotor position sensor interface EnDat® 22 Rotor position sensor measuring principle Inductive Temperature monitoring Digital motor temperature transmission via EnDat® 2.2 Max. rotational speed 6700 1/min Nominal rotary speed 3000 1/min Continuous stall current 3.1 A Motor constants 0.48 Nm/A Nominal operating voltage DC 325 V Motor nominal power 408 W Motor nominal current 2.7 A Rotor position sensor resolution 18 bit Phase-phase winding resistance 4.93 Ohm Winding inductance phase-phase 16.3 mH Type of winding switch Star inside Peak current 8.4 A Voltage constant, phase-to-phase 34.3 mVmin Rating class according to EN 60034-1 S1 CE marking (see declaration of conformity) As per EU EMC directive As per EU low voltage directive As per EU RoHS directive Corrosion resistance class (CRC) 0 - No corrosion stress Storage temperature -20 °C ... 70 °C Relative air humidity 0 - 90 % Degree of protection IP40 Ambient temperature -15 °C ... 40 °C Thermal class according to EN 60034-1 F Certification RCM compliance mark c UL us - Recognized (OL) Total output inertia moment 1.33 kgcm² Nominal torque 1.3 Nm Peak torque 2.8 Nm Stall torque 1.46 Nm Permissible axial shaft load 120 N Permissible radial shaft load 620 N MTTF, subcomponent 190 years, rotor position sensor MTTFd, subcomponent 380 years, rotor position sensor Product weight 2020 g Interface code, motor out 80P Note on materials Contains paint-wetting impairment substances RoHS-compliant Conforms to standard IEC 60034 12/21/20 - Subject to change - Festo AG & Co. KG 2/2