525113 FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Part number: 525113 Data sheet Feature Value Valve function 5/2, monostable Actuation type Electrical Width 10 mm Standard nominal flow rate 90 l/min Pneumatic working port M7 Operating voltage 24V DC Operating pressure -0.9 bar ... 8 bar Structural design Pressure-relieved poppet valve Reset method Mechanical spring Degree of protection IP65 Certification RCM compliance mark c UL us - Recognized (OL) KC characters KC EMC CE marking (see declaration of conformity) As per EU EMC directive Nominal width 2 mm Width dimension 14 mm Note on grid dimension Minimum distance between the valves is 4 mm Type code MH2 Exhaust air function With flow control option Sealing principle Soft Mounting position Any Manual override Non-detenting Type of control Direct Flow direction Non-reversible Symbol 00991129 Lap Underlap Reverse polarity protection Bipolar Additional functions Spark suppression Holding current reduction Protective circuit Max. switching frequency 300 Hz Switching time off 1.7 ms On switching time 1.9 ms Tolerance for switching time off +10 %/-30 % Tolerance for ON switching time +10%/-30% 11/15/21 - Subject to change - Festo AG & Co. KG 1/2
Switching time variation at 1 Hz and above 0.2 ms Duty cycle 100% Coil characteristics 24 V DC: low-current phase 1.625 W, high-current phase 6.5 W Permissible voltage fluctuations +/- 10 % Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication possible (required for further use) Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Restricted ambient and media temperature Depending on the switching frequency (see diagram) Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 Corrosion resistance class (CRC) 2 - Moderate corrosion stress Temperature of medium -5 °C ... 60 °C Ambient temperature -5 °C ... 60 °C Max. tightening torque of pneumatic fitting 2 Nm Product weight 70 g Electrical connection 2-pin Plug Type of mounting With through-hole Pneumatic connection 1 M7 Pneumatic connection 2 M7 Pneumatic connection 3 M7 Pneumatic connection 4 M7 Pneumatic connection 5 M7 Note on materials Free of copper and PTFE RoHS-compliant Seals material HNBR NBR Housing material Die-cast zinc Coated Material of screws Steel Galvanized 11/15/21 - Subject to change - Festo AG & Co. KG 2/2