52464 ETC2 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
52464 Micro (Pick and Place) Photovoltaic
Hi Voltage Output Optocoupler Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Features:
- 12V min. / 14V typical output at 25°C
- Input/Output Isolation Tested to 1000 VDC
- Mil Temp Range
- Pick and Place mounting
- Solderable terminations Applications:
- FET and IGBT drivers
DESCRIPTION
The 52464 Photovoltaic Optocoupler is designed for Pick and Place applications using solder or conductive epoxy attachment. It is a single channel optocoupler consisti ng of optically coupled LED light to photovoltaic detector. Each micro- coupler is 100% DC tested at 25 °C. (+125 °C testing or 100% element evaluat ion available upon request). All couplers are designed to operate over the full military temperature range. The 52464 is optimized for gate drive of FETs and IGBTs requiring full modulation. ABSOLUTE MAXIMUM RATINGS RECOMMENDED OPERATING CONDITIONS: Parameter Symbol Min. Max. Units Input Current IF (ON) 1 20 mA Operating Case Temperature TC -55 +125 °C
52464 Micro Photovoltaic Optocoupler
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: microsales@micropac.com 1/23/04 Page 1 of 3
TC= 25°C to +125°C unless otherwise specified Parameter Sym. Min. Typ.* Max. Units Test Conditions Notes Input Forward Voltage VF 2.2 3.0 VDC IF = 10 mA Input Reverse Breakdown Voltage VR 6 40 VDC IR = 100 µA Input-to-Output Capacitance CIO 4 7 pF Inputs and Outputs shorted Output open circuit Voltage Vopen 12 14 V IF= 10mA Output Voltage Temperature change Vtemp -2.2 mV/°C IF=10 Output short circuit Current Ishort 10 15 µA IF=10mA Input-Output Leakage II-O 1 µA RH ≤ 45%, t = 5 s VI-O = 1000 VDC TC = 25°C Notes: 1. This parameter is measured between both Output terminals shorted together and both Input terminals shorted together. 2. Dot on top of package indicates LED Anode, Pin 1. Schematic Diagram Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: microsales@micropac.com 1/23/04 Page 2 of 3
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: microsales@micropac.com 1/23/04 Page 3 of 3