5180 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

General Purpose PTFE Skived Film Tape 5180 • 5181 Product Description 3M™ General Purpose PTFE Skived Film Tapes are film backing with a silicone adhesive. Technical Data August, 2010 ASTM Test Method 3M™ Tape 5180 Adhesion to Steel: 25 oz./in. width (28 N/100 mm) D-3330 Tensile Strength: 30 lbs./in. width (525 N/100 mm) D-3759 Elongation at Break: 100% D-3759 Backing Thickness: 2.0 mils (0.05 mm) D-3652 Total Tape Thickness: 3.5 mils (0.09 mm) D-3652 Temperature Use Range: -65° to 500°F (-54° to 260°C) 3M™ Tape 5181 Adhesion to Steel: 35 oz./in. width (39 N/100 mm) D-3330 Tensile Strength: 75 lbs./in. width (1300 N/100 mm) D-3759 Elongation at Break: 100% D-3759 Backing Thickness: 5.0 mils (0.13 mm) D-3652 Total Tape Thickness: 6.5 mils (0.17 mm) D-3652 Temperature Use Range: -65° to 500°F (-54° to 260°C) Product Construction Backing Adhesive Color Standard Roll Length Skived PTFE Silicone Gray 36 yds. (33 m) (polytetrafluorethylene) Features • Demonstrate good conformability when wrapping rollers.

  • Provide excellent chemical resistance except to organic solvents. Note: The silicone adhesive will be attached by commercial organic solvents; therefore tapes are NOT recommended for applications requiring organic resistance. CAUTION: When PTFE film tape is exposed to temperatures above 600°F (316°C), small quantities of hazardous vapors may be released. INHALATION OF THESE V APORS MAY BE HARMFUL OR MAY CAUSE RESPIRATORY TRACT IRRITATION. Do not heat or expose PTFE film tapes to temperatures above 600°F (316°C). Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

3M ™ General Purpose PTFE Skived Film Tape 5180 • 5181 Shelf Life To obtain best performance, use this product within 24 months from date of manufacture. Storage Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in the original carton. Application Ideas • Wrapping rubber laminating rollers on hot polyethylene extruders to create a release surface to help minimize clean-up.

  • Easy release surface provided by wrapping rollers, plates, belts, etc. where build- up of sticky materials and inks can occur.
  • Chemical resistant surface for sealing and masking. The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Technical Information Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Warranty, Limited Remedy, and Disclaimer Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Limitation of Liability This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards. ISO 9001:2000 Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Product Use 3M is a trademark of 3M Company. Printed in U.S.A. ©3M 2010 70-0709-4788-5 (8/10) Recycled Paper 40% pre-consumer 10% post-consumer Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 800-362-3550 • 877-369-2923 (Fax) www.3M.com/industrial