5100 EMCORE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
TVRO Broadcast Earth Stations Headends VSAT GPS Radios
Applications
950 MHz – 2050 MHz Up to eight plug-in cards per 3u chassis Up to four flange-mount modules per 1u chassis 50 ohm SMA and 75 ohm Type Options Affordable replacement for coaxial systems Performance Highlights The 5100-Series fiber optic inter-facility links (IFLs) are a high performance, cost-effective alternative to coaxial cable for 950 MHz to 2050 MHz L-Band satellite communications applications. EMCORE’s fiber optic IFLs, function as transparent links between satellite antennas and Network Operations Centers (NOC). These IFLs eliminate the limitations of copper systems by enabling longer transmission distance while retaining the highest level of signal quality. In addition, EMCORE’s fiber optics provide several other significant network ad- vantages, including simplified network design, ease of installation, and immunity from EMI/RFI and lightning. They are available either in a flange-mount package for outdoor applications or as a plug-in for integration with EMCORE’s System 10000 rack-mount chassis. Minimum Typical Maximum Units Wavelength - 1310 - nm Transmitter Optical Output Power - 0 - dBm Receiver Optical Input Power - -12 - dBm Link Gain @ 1 dB optical loss Standard High dB Temperature Range Flange Mount Rack Mount -40 +65 +50 Frequency Range 950 - 2050 MHz See following pages for complete specifications and conditions. Package Options Transmitter Receiver Rack Mount1 950 - 1450 MHz 950 - 1750 MHz 950 - 2150 MHz 10346A 10346B 10347A 10446A 10446B 10447A Flange Mount 950 - 1450 MHz 950 - 1750 MHz 950 - 2150 MHz 3110A 3111A 3112A 4110A 4111A 4112A 1. Rack mount package for System 10000 platform only
SATCOMDATASHEET | OCTOBER 2012 © 2012 EMCORE Corporation | REV 2012.10 626-293-3400 satcom-sales@emcore.com www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
5100 Series
Electrical / Optical Characteristics Parameter Symbol Condition Min Max Units Operating Temperature Range Flange-mount Rack-mount TOP - -40 +65 +50 Storage Temperature Flange-mount Rack-mount T STG - -40 -40 +85 +85 DC Voltage - - - 24 VDC DC Current (Transmitter) - +8VDC 250 - mA DC Current (Receiver) - +8 VDC 200 - mA Parameter Symbol Condition Min Type Max Units Wavelength (Transmitter) - - 1290 - 1340 nm Optical Output Power (Transmitter) - - - 1 - mW dc Responsivity (Receiver) - - 0.75 - - A/W Fiber - Corning SMF-28 or equivalent - - - - Connector FC/APC Tight Fit, (Seikoh Giken or equivalent) - - - - Connector Return Loss - - 60 - - dB RF Characteristics, Tx Parameter Performance Tx Gain Option - Std. -002 (high) Tx Gain (TG) - 50 Ohm - -19.50 dB -2.50 dB Tx Gain (TG) - 75 Ohm - -17.75 dB -0.75 dB Noise figure, max - 45 dB 28 dB Input IP3, min. -20° C -40° C +7.5 dBm +4.5 dBm -9.5 dBm -12.5 dBm Input 1 dB compression, typical –20° C -40° C ≥ 0 dBm ≥ -3 dBm ≥ -17 dBm ≥ -20 dBm Max RF input (Tx) - +3 dBm -14 dBm Amplitude flatness any 500 MHz any 40 MHz ± 0.75 dB ± 0.20 dB VSWR Input 2.0:1 Input Impedance - 75 Ohm F , (50 Ohm SMA, option –001) Parameter Performance Rx gain option - Std. -002 (low) Rx Gain (RG) - 50Ohm - +21.00 dB +4.00 dB Rx Gain (RG) - 75 Ohm - +19.25 dB +2.25 dB Amplitude flatness any 500 MHz any 40 MHz ± 0.75 dB ± 0.15 dB VSWR Output 1.8:1 Output Impedance - 75 Ohm F , (50 Ohm SMA, option –001) RF Characteristics, Rx Parameter L-Band Performance Link Gain - Std. Low High 50 Ohm (At 25° C), min. - -4.00 dB -15.00 dB +13.00 dB 75 Ohm (At 25° C), min. - -4.00 dB -15.00 dB +13.00 dB Amplitude flatness any 500 MHz any 40 MHz ± 1.50 dB ± 0.35 dB Link Characteristics, 1 dB Optical Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operation- al sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. Figure 1. Receiver Electrical Schematic for Power Alarm Figure 2. Schematic for DC Power Monitor
- Applies to All Versions Except –003)
4 GND GND
5 GND GND
84 LNB DC Output nc
94 Connects to RF center pin for
- Powered from 10901G, or equivalent power supply
- Accessible via connector on back panel of 10990A chassis
- Ripple and noise: 100 mVp-p >100 kHz; 200 mVp-p <100 kHz
SATCOMDATASHEET | OCTOBER 2012 © 2012 EMCORE Corporation | REV 2012.10 626-293-3400 satcom-sales@emcore.com www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. Part / Number Model Description Capacity 1260-001-001 NEMA enclosure (12” x 12” x4”) Up to 2 flange-mount modules 1260-001-001 1U 19” rack mount chassis (1.75” x19” x 18”) Up to 4 flange-mount modules 1261-002-001 1U 19” rack mount chassis & internal power supply Up to 4 flange-mount modules 10990A 10901G 10901G 3U 19” rack mount chassis 3U, plug-in power supply (90-260 VAC input) 3U, auxiliary plug-in power supply (90-260 VAC input) Up to 8 plug-in modules Laser Safety This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1 laser product. This device has been classified with the FDA/CDRH under accession number 0220191. All versions of this laser are Class 1 laser product, tested according to IEC 60825-1:2007 / EN 60825-1:2007. Wavelength = 1.3 μm. Maximum power = 30 mW. Caution: Use of controls, adjustments and procedures other than those specified herein may result in hazardous laser radiation exposure. Ordering Code Definitions - Transmitters Option Option Availability Option Description Standard Configuration Flange Mount Plug-in -001 X X 50 Ω SMA, female 75 Ω F-type connector, female -002 X X Two-stage RF Pre-amp Single stage RF Pre-amp -003 X Unit to run from + 5.0 V ± 0.2V No internal DC regulator Internal DC regulator operates from +8V to +24 V input -004 X No LNB voltage on center pin DC voltage on center pin for LNB powering -006 X 75 Ω CANARE BNC, female 75 Ω F-type connector, female Option Option Availability Option Description Standard Configuration Flange Mount Plug-in -001 X X 50 Ω SMA, female 75 Ω F-type connector, female -002 X X Single stage RF Post-amp Two-stage RF Post-amp. -003 X Unit to run from + 5.0 V ± 0.2V No internal DC regulator Internal DC regulator operates from +8V to +24 V input -004 X No DC voltage on center pin DC voltage on center pin -006 X 75 Ω CANARE BNC, female 75 Ω F-type connector, female Ordering Code Definitions - Receivers
SATCOMDATASHEET | OCTOBER 2012 © 2012 EMCORE Corporation | REV 2012.10 626-293-3400 satcom-sales@emcore.com www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. Receiver package depicted below. Transmitter plug-in has only “Power On” indicator LED. Flange Mount Package