50SMDJ MERITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
For surface mounted applications in order to optimize board space. Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Excellent clamping capability. Repetition Rate (duty cycle): 0.01%. Fast response time: typically less than 1.0ps from 0 volt to BV for unidirectional types. Typical IRless than 1µA. High Temperature soldering: 260°C/10 seconds at terminals. M Case: JEDEC DO-214AB. Molded plastic over glass passivated junction. Terminal: Solder plated, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotes cathode except Bidirectional. Standard Packaging: 16mm tape (EIASTD RS-481). Weight: 0.007 ounce, 0.21 grams. M Ng. 2. . Mounted on 8.0mm x 8.0mm Copper Pads to each terminal. 3.es maximum. SMC/DO-214AB Ratings at 25 ambient temperature unless otherwise specified. Transient Voltage Suppressors 60'- Series MERITEK
FEATURES
MAXIMUM RATINGS AND CHARACTERISTICS Notes:/g3/g31. Non-repetitive current pulse, per Fig. 3 and derated above T A =2 5/g3/g3/g3/g3/g83er Fig. 2. 2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum. RATING SYMBOL VALUE UNIT Peak Pulse Power Dissipation on 10/1000 s waveform. (Note 1, Note 2, Fig. 1) PPPM Minimum 5,000 Watts Peak Pulse Current on 10/1000 s waveform. (Note 1, Fig. 3) IPPM See Table Amps Steady State Power Dissipation at TL =75 , Lead lengths .375” (9.5mm). (Note 2, Fig. 5) PM(AV) 6.5 Watts Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load. (JEDEC Method) (Note 3, Fig. 6) IFSM 300 Amps Operating junction and Storage Temperature Range. TJ ,T STG -65 to +150 /g131/g38 /g131/g38 /g131/g38 All specifications are subject to change without notice. Rev 7
@IT Breakdown Voltage @IT Test Current Maximum Clamping Voltage @IPP Peak Pulse Current Reverse Leakage @VRWM UNI-POLAR BI-POLAR UNI BI VRWM(V) V BR MIN.(V) V BR MAX.(V) I T(mA) V C(V) I PP(A) I R(µA) Millimeters InchesItem Min. Max. Min. Max. L 6.60 7.11 0.260 0.280 D 5.59 6.22 0.220 0.245 D1 2.90 3.20 0.114 0.126 T 7.75 8.13 0.305 0.320 T1 0.76 1.52 0.030 0.060 d - 0.203 - 0.008 s 2.06 2.62 0.079 0.103 t 0.152 0.305 0.006 0.012 t s T1d T D1 D L Cathode Band SMC/DO-214AB Transient Voltage Suppressors 60'- Series MERITEK PACKAGE DIMENSIONS SPECIFICATIONS Rev 7
@IT Breakdown Voltage @IT Test Current Maximum Clamping Voltage @IPP Peak Pulse Current Reverse Leakage @VRWM UNI-POLAR BI-POLAR UNI BI VRWM(V) V BR MIN.(V) V BR MAX.(V) I T(mA) V C(V) I PP(A) I R(µA) Note: For Bidirectional type having VRWM of 10 volts and less, the IR limit doubles. Transient Voltage Suppressors 60'- Series MERITEK Rev 7