50SHE_V01 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

www.vishay.com Vishay Sfernice Revision: 27-Mar-15 1 Document Number: 57104 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Single Turn Servo Mount Hall Effect Sensor in Size 05 (12.7 mm)

FEATURES

  • Accurate linearity down to: ± 0.5 %
  • All electrical angles available up to: 360° (no dead band)
  • Long life: Greater than 50M cycles
  • Non contacting technology: Hall effect
  • Smallest size available
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Sensor type ROTATIONAL, single turn hall effect Output type Wires Market appliance Professional Dimensions ½" (12.7 mm) dia. ELECTRICAL SPECIFICATIONS PARAMETER STANDARD SPECIAL Electrical angle 90°, 180°, 270°, 360° Any other angle upon request Linearity ± 1 % ± 0.5 % Supply voltage 5 V DC ± 10 % Other upon request Supply current 10 mA typical/16 mA max. 16 mA for PWM output Output signal Analog ratiometric 10 % to 90 % of Vsupply or PWM 1 kHz, 10 % to 90 % duty cycle Other upon request Over voltage protection +20 V DC Reverse voltage protection -10 V DC Load resistance recommended Min. 1 k  for analog output and PWM output Hysteresis static < 0.2° max. MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel 360° continuous Bearing type 2 ball bearings Standard IP 51; other on request ORDERING INFORMATION/DESCRIPTION

50 SHE 1 A 1 W A 2S13 XXXX BO 10 e1

OF CUP LINEARITY ELECTRICAL ANGLE OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST PACKAGING LEAD FINISH 1:1 Cup A: ± 1 % B: ± 0.5 % 1: 90° 2: 180° 3: 270° 4: 360° 9: Other angles W: Wires Custom A: Analog CW B: Analog CCW C: PWM CW D: PWM CCW Z: Other output 2: 3.175 mm 9: Special P: Plain S: Slotted Z: Other type Box of 10 pieces Shaft length from mounting face, standard: 13 mm SAP PART NUMBERINGGUIDELINES

50 SHE 1 B 9 Z C 2P22 XXXX

1: 1 cup OUTPUT SIGNAL LINEARITY ELECTRICAL ANGLE OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST

www.vishay.com Vishay Sfernice Revision: 27-Mar-15 2 Document Number: 57104 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOUT ANALOG Operating temperature 85 °C 125 °C Diagnostic high level 96 % min. 96 % min. Diagnostic low level 2 % max. 4 % max. VOUT PWM CW Vout (% Vsupply) Vout (% Vsupply) Diag High Level Diag High Level 90 % 90 % 10 % Diag Low Level 10 % Diag Low Level

0 Theta (Position) 0 Theta (Position)

(% Vsupply) 97 % min. 1.5 % max. T low T: periodicity T high Duty Cycle = Thigh T Time (µs)

www.vishay.com Vishay Sfernice Revision: 27-Mar-15 3 Document Number: 57104 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Nothing stated herein shall be construed as a guarantee of quality or durability. DIAGNOSTIC MODES FAILURE Vout ANALOG Rpull-up Vout ANALOG Rpull-down Vout PWM Rpull-up = 1 k Vpull-up = Vsupply = 5 V 1: Broken GND Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation 2: Broken Vout Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation 3: Broken Vsupply Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation Over Voltage Vsupply > 7 V Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation Under Voltage Vsupply < 2.7 V Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation ENVIRONMENTAL SPECIFICATIONS Vibrations 20 g from 10 Hz to 2000 Hz, EN 60068-2-6 Shocks 3 shocks/axis; 50 g half a sine 11 ms, EN 60068-2-7 Operating temperature range -40 °C; +125 °C Life > 50M of cycles Rotational speed (max.) 120 rpm Immunity to radiated electromagnetic disturbances 200 V/m 150 kHz/1 GHz, IEC 62132-2 part 2 (level A) Immunity to power frequency magnetic field 200 A/m 50 Hz/60 Hz, EN 61000-4-8 (level A) Radiated electromagnetic emissions 30 MHz/1 GHz < 30 dB μV/m, EN 61000-6-4 (level A) Electrostatic discharges Contact discharges: ± 4 kV Air discharges: ± 8 kV, EN 61000-4-2 MATERIALS Housing Aluminum Shaft Stainless steel Output 3 lead wires (AWG 24) Vsupply Vpull-up Rpull-up VoutGND Cut off Sensor Vpull-up can be independent to Vsupply

www.vishay.com Vishay Sfernice Revision: 27-Mar-15 4 Document Number: 57104 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in millimeters Ø 3.175 max. - 0.013 CW or CCW according to output mode choice V supply = Green wire Vout = Red wire GND = Y ellow wire View from shaft sideGeneral tolerance: ± 0.5 mm 1:1 Ø 9.5 ± 0.013 Ø 12.6 ± 0.1 Ø 12.6 ± 0.1 Ø 11 ± 0.1 19.5 ± 0.5 1.6 ± 0.1 1.6 ± 0.1 1.6 ± 0.1 12.7 ± 0.8 0.4 x 45° AWG 24 l = 300 mm 3 wires

www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED