DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

www.vishay.com Vishay Sfernice Revision: 25-Jul-12 1 Document Number: 57104 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Single Turn Servo Mount Hall Effect Sensor in Size 05 (12.7 mm)

FEATURES

  • Accurate linearity down to: ± 0.5 %
  • All electrical angles available up to: 360° (no dead band)
  • Long life: Greater than 50M cycles
  • Non contacting technology: Hall effect
  • Smallest size available
  • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Sensor type ROTATIONAL, single turn hall effect Output type Wires Market appliance Professional Dimensions ½" (12.7 mm) dia. ELECTRICAL SPECIFICATIONS PARAMETER STANDARD SPECIAL Electrical angle 90°, 180°, 270°, 360° Any other angle upon request Linearity ± 1 % ± 0.5 % Supply voltage 5 V DC ± 10 % Other upon request Supply current 10 mA typical/16 mA max. 16 mA for PWM output Output signal Analog ratiometric 10 % to 90 % of Vsupply or PWM 1 kHz, 10 % to 90 % duty cycle Other upon request Over voltage protection + 20 V DC Reverse voltage protection - 10 V DC Load resistance recommended Min. 1 k : for analog output and PWM output Hysteresis static < 0.2° max. MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel 360° continuous Bearing type 2 ball bearings Standard IP 51; other on request ORDERING INFORMATION/DESCRIPTION

50 SHE 1 A 1 W A 2S16 XXXX BO 10 e1

OF CUP LINEARITY ELECTRICAL ANGLE OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST PACKAGING LEAD FINISH 1:1 Cup A: ± 1 % B: ± 0.5 % 1: 90° 2: 180° 3: 270° 4: 360° 9: Other angles W: Wires Custom A: Analog CW B: Analog CCW C: PWM CW D: PWM CCW Z: Other output 2: 3.175 mm 9: Special P: Plain S: Slotted Z: Other type Box of 10 pieces Shaft length from mounting face, standard: 16 mm SAP PART NUMBERINGGUIDELINES

50 SHE 1 B 9 Z C 2P22 XXXX

1: 1 cup OUTPUT SIGNAL LINEARITY ELECTRICAL ANGLE OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST

www.vishay.com Vishay Sfernice Revision: 25-Jul-12 2 Document Number: 57104 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VOUT ANALOG Operating temperature 85 °C 125 °C Diagnostic high level 96 % min. 96 % min. Diagnostic low level 2 % max. 4 % max. VOUT PWM CW Vout (% Vsupply) Vout (% Vsupply) Diag High Level Diag High Level 90 % 90 % 10 % Diag Low Level 10 % Diag Low Level

0 Theta (Position) 0 Theta (Position)

(% Vsupply) 97 % min. 1.5 % max. T low T: periodicity T high Duty Cycle = Thigh T Time (μs)

www.vishay.com Vishay Sfernice Revision: 25-Jul-12 3 Document Number: 57104 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIAGNOSTIC MODES FAILURE Vout ANALOG Rpull-up Vout ANALOG Rpull-down Vout PWM Rpull-up = 1 k: Vpull-up = Vsupply = 5 V 1: Broken GND Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation 2: Broken Vout Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation 3: Broken Vsupply Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation Over Voltage Vsupply > 7 V Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation Under Voltage Vsupply < 2.7 V Diagnostic high area Di agnostic low area > 97 % Vsupply without modulation ENVIRONMENTAL SPECIFICATIONS Vibrations 20 g from 10 Hz to 2000 Hz, EN 60068-2-6 Shocks 3 shocks/axis; 50 g half a sine 11 ms, EN 60068-2-7 Operating temperature range - 40 °C; + 125 °C Life > 50M of cycles Rotational speed (max.) 120 rpm Immunity to radiated electromagnetic disturbances 200 V/m 150 kHz/1 GHz, IEC 62132-2 part 2 (level A) Immunity to power frequency magnetic field 200 A/m 50 Hz/60 Hz, EN 61000-4-8 (level A) Radiated electromagnetic emissions 30 MHz/1 GHz < 30 dBμV/m, EN 61000-6-4 (level A) Electrostatic discharges Contact discharges: ± 4 kV Air discharges: ± 8 kV, EN 61000-4-2 MATERIALS Housing Aluminum Shaft Stainless steel Output 3 lead wires (AWG 24) Vsupply Vpull-up Rpull-up VoutGND Cut off Sensor Vpull-up can be independent to Vsupply

www.vishay.com Vishay Sfernice Revision: 25-Jul-12 4 Document Number: 57104 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in millimeters Ø 3.175 max. - 0.013 CW or CCW according to output mode choice V supply = Green wire Vout = Red wire GND = Y ellow wire View from shaft sideGeneral tolerance: ± 0.5 mm 1:1 Ø 9.5 ± 0.013 Ø 12.6 ± 0.1 Ø 12.6 ± 0.1 Ø 11 ± 0.1 19.5 ± 0.5 1.6 ± 0.1 1.6 ± 0.1 1.6 ± 0.1 12.7 ± 0.8 0.4 x 45° AWG 24 l = 300 mm 3 wires