509169 SENNHEISER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

PRODUCT SPECIFICATION (V1.4) SPECTERA DAD (UHF) | DAD (1G4) Digital Antenna Directional DELIVERY INCLUDES

  • SPECTERA DAD (UHF) or SPECTERA DAD (1G4)
  • Quick guide
  • Safet y guide
  • Manufactur er declaration sheet The transceiving Spectera Digital Antenna Directional (DAD) manages IEM signals, mic/line signals and data simultaneously. It provides continuous interference management and remote control, and is equipped with a ruggedized RJ45 connector, IP54 protection, and PoE.

FEATURES

  • Transceiving antenna manages IEM signals, mic/line signals, and data simultaneously Av ailable variants: UHF (470 – 608 MHz and 630 – 698 MHz) or 1G4 (1350 – 1400 MHz and 1435 –

1525 MHz)

ed RF components eliminate the need for addi- tional dedicated RF gear such as combiners, splitters, or boosters Ruggedized RJ45 connect or for standard network cable CAT 5e or higher (point to point)

  • Continuous interf erence management and remote control
  • IP54 prot ection
  • Optional use as dedicated f ast and high-quality scanning device
  • Po wered over ethernet (standard PoE) ACCESSORIES Antenna cable cat 5e (10 m) with NEUTRIK® etherCON® connectors Art. no. 700068 Antenna cable cat 5e (25 m) with NEUTRIK® etherCON® connectors Art. no. 700069 Antenna cable cat 5e (50 m) with NEUTRIK® etherCON® connectors Art. no. 700070 PRODUCT VARIANTS SPECTERA DAD (UHF) 470 – 608 MHz, 630 – 698 MHz Art. no. 509169 SPECTERA DAD (1G4) 1350 – 1400 MHz 1435 – 1525 MHz Art. no. 509170 SPECTERA DAD (UHF) SPECTERA DAD (1G4)

PRODUCT SPECIFICATION (V1.4) SPECTERA DAD (UHF) | DAD (1G4) Digital Antenna Directional SPECIFICATIONS System Transmission scheme Multicarrier, TDMA, TDD RF channel Bandwidth: 6 or 8 MHz countrywise limited Mobiles devices: up to 128 per RF channel Audio links: up to 128 per RF channel Radio frequency range UHF: 470 - 608 MHz, 630 - 698 MHz 1G4: 1350 - 1400 MHz, 1435 - 1525 MHz countrywise limited Audio frequency response 20 Hz to 20,000 Hz (±1 dB) (Audio link modes with audio codecs SeDAC and PCM only) Encryption AES 256 CTR Mode exp. >10k years Audio link modes MIC/LINE Mono Max links per RF carrier Utilized % of RF carrier Audio codec Latency Range Raw Low Latency Mono 8 12.50 % PCM 1.0 ms Reduced Raw Mono 16 6.25 % PCM 1.6 ms Reduced Live Low Latency Mono 8 12.50 % SeDAC 1.0 ms Extended Live Mono 16 6.25 % SeDAC 1.6 ms Extended Live Link Density Mono 32 3.13 % SeDAC 2.7 ms Standard Max Range Mono 16 6.25 % OPUS 9.9 ms Maximum Max Link density Mono 128* 0.78 % OPUS 15.2 ms Reduced IEM/IFB Mono/ Stereo Max links per RF carrier Utilized % of RF carrier Audio codec Latency Range Live Mono 16 6.25 % SeDAC 1.6 ms Extended Live Link Density Mono 32 3.13 % SeDAC 2.7 ms Standard Max Range Mono 16 6.25 % OPUS 9.9 ms Maximum Max Link density Mono 128* 0.78 % OPUS 15.2 ms Reduced Live Ultra Low Latency Stereo 4 (8 ch) 25 % SeDAC 0.7 ms Extended Live Low Latency Stereo 8 (16 ch) 12.50 % SeDAC 1.1 ms Extended Live Stereo 16 (32 ch) 6.25 % SeDAC 1.6 ms Standard Live Link Density Stereo 32 (64 ch)** 3.13 % SeDAC 2.7 ms Reduced * Base Stations have 32 audio outputs, for 128 links in a single RF channel, 4 Base Stations and firmware update with cascade port function are required (future release) ** Base Stations have 32 audio inputs, for 32 stereo links (64 ch) in a single RF channel, 2 Base Stations and firmware update with cascade port function are required (future release)

PRODUCT SPECIFICATION (V1.4) SPECTERA DAD (UHF) | DAD (1G4) Digital Antenna Directional SPECTERA DAD (UHF) | DAD (1G4) RF transmission power up to 100 mW; countrywise limited RF channels 1 Base Station connection Ruggedized RJ45 including PoE, max. 100 m cable, CAT5e or better, 1 Gbit/s Power consumption PoE class 2 (<6.5 W) Apex angle vertical horizontal UHF: 65 ° 1G4: 62 ° UHF: 109 ° 1G4: 93 ° Front to back ratio UHF: 15 dB 1G4: 17 dB Gain UHF: 5 dB 1G4: 6.5 dB Threads for tripod mounting yes / Adapter 3/8" to 5/8" Dimensions UHF: 349 x 292 x 39 mm (13.74" x 11.5" x 1.54") 1G4: 231 x 205 x 39 mm (9.09" x 8.07" x 1.54") Weight UHF: approx. 676 g (1.49 lbs) 1G4: approx. 534 g (1.18 lbs) Temperature Operation: −10 °C to +60 °C (14 °F to 140 °F) Storage: −25 °C to +80 °C (−13 °F to 176 °F) Relative humidity 25 % to 95 % (non-condensing) IP class IP54 SPECIFICATIONS

PRODUCT SPECIFICATION (V1.4) SPECTERA DAD (UHF) | DAD (1G4) Digital Antenna Directional DIMENSIONS DAD (UHF) 3.54 349 13.74 101.9 4.01 292.17 11.5 0.12 Buchse RJ45 (robuste Ausführung) / jack RJ45 (ruggedized) Stativgewindeeinsatz 3/8"- 5/8" UNC / tripod thread insert 3/8"- 5/8" UNC 39.33 1.55 37.18 1.46

PRODUCT SPECIFICATION (V1.4) SPECTERA DAD (UHF) | DAD (1G4) Digital Antenna Directional DAD (1G4) 231.08 9.1" 205.3 8.08" 3.54" 101.9 4.01" 0.12" Buchse RJ45 (robuste Ausführung) / jack RJ45 (ruggedized) Stativgewindeeinsatz 3/8"- 5/8" UNC / tripod thread insert 3/8"- 5/8" UNC 37.18 1.46" 39.33 1.55"

PRODUCT SPECIFICATION (V1.4) SPECTERA DAD (UHF) | DAD (1G4) Digital Antenna Directional ARCHITECT‘S SPECIFICATION Sennheiser Spectera/ System description / Intro text Digital bidirectional (uplink/ downlink) multicarrier/ TDMA/ TDD wireless system for simultaneous transmission of up to 32 audio input and output channels. The system shall use digital broadband transmission technology for this purpose. It shall be based on wireless multichannel audio systems technology (WMAS) and its combination of modulation and multi- plexing methods. Data and audio transmission, as well as remote control and monitoring data, shall be carried out via a single RF carrier, avoiding the 2.4 ISM band. The system shall operate in the TV UHF band or the 1.4/1.5 GHz band. It shall operate with an RF channel bandwidth of 6 or 8 MHz and shall pair up to 128 mobile devices per RF channel. It shall provide a switching bandwidth of 194 MHz (UHF) or 128 MHz (1.4 GHz), which shall be identical for all RF compo- nents in the system; the base station shall be frequency-independent and both frequency bands shall be operated simul- taneously by a single base station. The system shall consist of the following components: Base Station in 19" /1U format (shall allow up to two independent wideband RF carriers in UHF or 1G4 band). The base station shall process only digital audio signals without any analog components (compander, RF emphasis, etc.).

  • Bodypacks f or simultaneous use as both in-ear monitoring receiver and transmitter for microphone/line audio signals.
  • Digital bidirectional ant enna with integrated RF components (up to four pieces shall be used simultaneously).
  • Proprietar y desktop application for comprehensive system management.
  • Handheld microphone (in de velopment). The system can be operated with only one antenna. Up to four antennas can be connected to a single base station and operated in multi-zone mode with improved antenna coverage and optimized signal-to-noise ratio. The connection bet- ween the base station and antennas shall be a digital 1 Gb/s connection via a CAT5e (or higher) cable with a maximum length of 100 m. For all system components, data and audio shall be transmitted via a single RF carrier. The system shall support up to 128 audio channels per RF channel, with each channel individually configurable (audio codec, latency, operating range). The audio frequency response of the system shall be 20 Hz to 20,000 Hz, the system latency shall be min. 0.7 ms for stereo audio links/ 1 ms for mono audio links. The system shall offer 11 audio link/transmission modes, including a mode for linear PCM format. Each channel can be operated in a different mode; Modes can be changed at any time and without rebooting. The internal audio processing shall be done in 32-bit float format. 100 – 240 V power supply units, Dante and optional MADI connectors shall be redundant; a total of up to four antennas can be operated simultaneously. The system shall have AES 256 end-to-end encryption. The system shall be remotely controlled and monitored via Windows, macOS native software and a WebUI. The system shall comply with all relevant international standards and regulations for wireless audio transmission. It shall be certified for use in a wide variety of regions (including the EU, USA and Canada).

PRODUCT SPECIFICATION (V1.4) SPECTERA DAD (UHF) | DAD (1G4) Digital Antenna Directional Sennheiser electronic SE & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · www.sennheiser.com Digital bidirectional antenna (Sennheiser Spectera DAD UHF) Digital bidirectional transceiver directional antenna for simultaneous wireless transmission of IEM/IFB, Mic/Line, control and monitoring data matching the wireless system described in the system description. The antenna shall provide continuous interference ma- nagement for the RF channel in use without interruption or interference with the audio signal; the antenna shall offer the option to be used as a spectrum scanning device for the full bandwidth. The antenna shall be powered by PoE Class 2. Technical requirements Specifications: Fr equency range: 470 – 608 MHz/ 630 – 698 MHz

  • RF pow er: 10 – 100 mW
  • Apex angle (f x h): 65° x 109° Connections: 1 x RJ45
  • 1 x thread incl. 3 /8" to 5/8" adapter Physical Properties: Dimensions: 349 x 292 x 39 mm
  • Weight : 676 g
  • Operating temperatur e: approx. −10 °C – +60 °C
  • Relativ e humidity: 25 % – 95 %
  • Po wer supply: PoE Class 2
  • Po wer consumption: < 6.5 W
  • IP Class: IP54 Digital bidirectional antenna (Sennheiser Spectera DAD 1G4) Digital bidirectional transceiver directional antenna for simultaneous wireless transmission of IEM/IFB, Mic/Line, control and monitoring data matching the wireless system described in the system description. The antenna shall provide continuous interference ma- nagement for the RF channel in use without interruption or interference with the audio signal; the antenna shall offer the option to be used as a spectrum scanning device for the full bandwidth. The antenna shall be powered by PoE Class 2. Technical requirements: Specifications: Fr equency range: 1350 – 1400 MHz/ 1435 – 1525 MHz
  • RF pow er: 10 – 100 mW
  • Apex angle (f x h): 62° x 93° Connections: 1 x RJ45
  • 1 x thread incl. 3 /8" to 5/8" adapter Physical Properties: Dimensions: 231 x 205 x 39 mm
  • Weight : 534 g
  • Operating temperatur e: approx. −10 °C – +60 °C
  • Relativ e humidity: 25 % – 95 %
  • Po wer supply: PoE Class 2
  • Po wer consumption: < 6.5 W
  • IP Class: IP54