509342 SENNHEISER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

PRODUCT SPECIFICATION (V1.54) Evolution Wireless Digital EW-DX EM 2 | Rack Receiver DELIVERY INCLUDES

  • EW-DX EM 2 rack receiver
  • 2 rod ant ennas
  • pow er supply with country adapters
  • GA 3 rackmount set
  • 4 rubber feet
  • quick guide
  • safet y guide
  • manufactur er declaration sheet Half-rack (9.5") receiver for use with Evolution Wireless Digital handheld, bodypack and tablestand transmitters.

FEATURES

  • 2 channel half rack (9.5")
  • Up to 88 MHz s witching bandwidth
  • PoE IEEE 802 .3af Class 0
  • Equidistant Channel Spacing: 146 channels in standar d mode; 293 channels in Link Density Mode
  • Netw ork enabled for control with Sennheiser Control Cockpit/ media control system through a number of 3rd party modules
  • Clear and easy f ocused user interface with OLED display
  • Ethernet connectivity (IP v4 and IPv6)
  • Secure AES 256 encr yption
  • External PSU 12 V /1 A
  • All-metal housing SPECIFICATIONS EW-DX EM 2 (Rack Receiver) Input voltage 11 - 13 V DC or PoE IEEE 802.3af Class 0 (CAT5e or higher) Input current ≤ 1 A Power consumption max. 12 W Transmit power (radiated) BLE: max. 10 mW EIRP Audio output power 18 dBu max. Headphone output 2x 70 mW @ 32 Ω Ethernet RJ-45 socket, IEEE802.3 100Base-TX (half+full duplex) 10Base-T (half+full duplex) (CAT5e or higher) Dimensions 212 x 44 x 189 mm Weight approx. 1000 g (2.2 lbs) (without antennas and power supply) System Audio link frequency ranges Q1-9 R1-9 S1-10 S2-10 S4-10 U1/5 V3-4 V5-7 W5-6 Y1-3 470.2 - 550 MHz 520 - 607.8 MHz 606.2 - 693.8 MHz 614.2 - 693.8 MHz 630 - 693.8 MHz 823.2 - 831.8 MHz & 863.2 - 864.8 MHz 925.2 - 937.3 MHz 941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz 1240.1 - 1251.875 MHz & 1253.125 - 1259.9 MHz 1785.2 - 1799.8 MHz Bluetooth® Low Energy (BLE) frequency range 2402 - 2480 MHz Audio frequency response

20 Hz - 20 kHz (-3 dB)

Audio THD ≤ -60 dB for 1 kHz @ -3 dBfs input level Dynamic range 134 dB System latency 1.9 ms Operating temperature -10 °C - +50 °C (14 °F - 122 °F) Relative humidity 5 - 95 % (non-condensing)

PRODUCT SPECIFICATION (V1.54) Evolution Wireless Digital EW-DX EM 2 | Rack Receiver ACCESSORIES EW-D ASA (Q-R-S) Active Antenna Splitter 470 - 694 MHz Art. no. 508879 EW-D ASA (T-U-V) Active Antenna Splitter 694 - 1075 MHz Art. no. 508880 EW-D ASA (W) Active Antenna Splitter 1240 - 1260 MHz Art. no. 700714 EW-D ASA (X-Y) Active Antenna Splitter 1350 - 1805 MHz Art. no. 508881 EW-D ASA CN/ANZ (Q-R-S) Active Antenna Splitter 470 - 694 MHz Art. no. 508998 EW-D AB (Q) Antenna Booster 470 - 550 MHz Art. no. 508873 EW-D AB (R) Antenna Booster 520 - 608 MHz Art. no. 508874 EW-D AB (S) Antenna Booster 606 - 694 MHz Art. no. 508875 EW-D AB (U) Antenna Booster 823 - 865 MHz Art. no. 508876 EW-D AB (V) Antenna Booster 902 - 960 MHz Art. no. 508877 EW-D AB (W) Antenna Booster 1240 - 1260 MHz Art. no. 700715 EW-D AB (Y) Antenna Booster 1785 - 1805 MHz Art. no. 508878 ADP UHF (470 - 1075 MHz) Passive directional antenna 470 - 1075 MHz Art. no. 508863 BA 70 Rechargeable battery pack for SK and SKM Art. no. 508860 L 70 USB Charger for BA 70 rechargeable battery pack Art. no. 508861 EW-D CHARGING SET Set of L 70 USB charger and 2 BA 70 rechargeable battery packs Art. no. 508862 CHG 70N-C Network-enabled charger for SK, SKM and BA 70 Art. no. 700332 CHG 70N-C + PSU KIT CHG 70N-C charger with NT 12-35 CS power supply unit Art. no. 700333 PRODUCT VARIANTS EW-DX EM 2 (Q1-9) 470.2 - 550 MHz Art. no. 509342 EW-DX EM 2 (R1-9) 520 - 607.8 MHz Art. no. 509343 EW-DX EM 2 (S1-10) 606.2 - 693.8 MHz Art. no. 509344 EW-DX EM 2 (S2-10) 614.2 - 693.8 MHz Art. no. 509347 EW-DX EM 2 (S4-10) 630 - 693.8 MHz Art. no. 509348 EW-DX EM 2 (V3-4) 925.2 - 937.3 MHz Art. no. 509351 EW-DX EM 2 (Y1-3) 1785.2 - 1799.8 MHz Art. no. 509355

PRODUCT SPECIFICATION (V1.54) Evolution Wireless Digital EW-DX EM 2 | Rack Receiver DIMENSIONS 44.2 1.74 212.1 8.35 1.65 33.13 1.3 72.88 2.87 91.38 3.6 59.63 2.35 79.5 3.13 92.75 3.65 23.2 0.91 0.55 6.3mm Klinkenbuchse 6.3mm Phone-Jack 13.4 0.53 20.7 0.81 14.9 0.59 8.4 0.33 169 6.65 90.5 3.56 2.2 0.55 17.5 0.69 31.2 1.23 17.45 0.69 23.45 0.92 33.95 1.34 21.5 0.85 3.46 0.04 25.5 148 1.89 Zugentlastung Cable Grip XLR-3 Steckverbinder XLR-3 Connector 6.3mm Klinkenbuchse 6.3mm Phone-Jack DC-Power-Jack BNC-Jack RJ45 Buchse RJ45 Jack

PRODUCT SPECIFICATION (V1.54) Evolution Wireless Digital EW-DX EM 2 | Rack Receiver Sennheiser electronic SE & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · www.sennheiser.com ARCHITECT‘S SPECIFICATION EW-DX EM 2 rack receiver The stationary two-channel receiver with switching diver- sity technology shall be for use with up to two companion transmitters as part of a digital wireless RF transmission system. The receiver shall operate within the following UHF frequency ranges, with a switching bandwidth of up to 88 MHz: 470.2 – 550 MHz, 520 – 607.8, 606.2 – 693.8 MHz, MHz, 614.2 – 693.8 MHz, 630 – 693.8 MHz, 823.2 – 1799.8 MHz. Different frequency variants shall be available depending on country-specific regulations. The receiver shall feature Bluetooth® Low Energy (BLE) at a frequency range between 2402 and 2480 MHz for remote controlling the devices via a control App for iOS and And- roid. The receiver shall feature an automatic frequency setup function with spectrum scan functionality in order to es- tablish an equidistant frequency grid with 146 channels in standard mode and 293 channels in Link Density Mode. The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB). Audio total harmonic distortion (THD) shall be ≤ -60 dB for 1 kHz @ -3 dBfs input level. Dynamic range shall be 134 dB. System latency shall be 1.9 ms. The receiver shall be menu-driven with an OLED display showing the current frequency, channel number, metering of RF level, metering of AF level, lock status, muting fun- ction, antenna switching diversity, app connection, gain, audio output level, menu and battery status for each of the two associated transmitters. An auto-lock feature shall be provided to prevent settings from being accidentally altered. The following settings shall be configurable by function buttons and an encoder for each channel in the menu: frequency, channel name, gain, trim, AF output, low cut, AES 256 encryption, test tone, network settings, integrated antenna booster settings, display brightness, device name, auto setup settings for automatic frequency setup. For each of the two channels the receiver shall feature a balanced XLR-3M audio output with a maximum output of +18 dBu along with an unbalanced 6.3 mm (¼") audio output with a maximum output of +12 dBu. For secure transmission the receiver shall feature AES 256 encryption. The receiver shall provide a walktest mode for monitoring the RF and AF signal status in the location over time. Two BNC-type input sockets shall be provided for connec- ting the antennas. The receiver shall be usable with active and passive wide range UHF antennas for the entire sup- ported RF spectrum. A headphone output with headphone volume control shall be provided and shall utilize a 6.3 mm stereo jack socket. The receiver shall have an Ethernet port (RJ-45) for remote network-based monitoring and control using the Sennhei- ser Control Cockpit software or the Sennheiser Wireless Systems Manager software. The receiver shall operate on 12 V DC power supplied from the power supply unit or on Power over Ethernet (PoE IEEE 802.af Class 0). Power consumption shall be ≤ 1 A. The receiver shall have a rugged metal housing; dimensi- ons shall be approximately 212 x 44 x 206 mm (8.35" x 1.73" x 8.11"). Weight shall be approximately 1000 grams (2.2 lbs) without antennas and power supply. Operating tempera- ture shall range from −10 °C to +50 °C (+14 °F to +122 °F). The receiver shall be the Sennheiser EW-DX EM 2.