5086147-1

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 321

Technical content

Catalog 13078 19 Revised 8 -11 A M PM O D U Interconnection System FO R M O RE IN FO RM ATIO N te.com / products/A M PM O D U System 50 te.com / products/A M PM O D U M TE TE Technical Support Center Internet: te.com / help U SA : +1 (8 00) 522-6 752 Canada: +1 (905) 475-6 222 M exico +52 (0) 55-1106 -08 00 Latin/ S. A m erica: +54 (0) 11-4733-2200 G erm any: +49 (0) 6 251-133-1999 U K: +44 (0) 8 00-26 76 6 6 France: +33 (0) 1-3420-8 6 8 6 N etherlands: +31 (0) 73-6 246 -999 China: +8 6 (0) 400-8 20-6 015 Part num bers in this brochure are RoH S Com pliant*, unless m arked otherw ise. *as defined w w w .te.com / leadfree te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Com pany. A ll Rights Reserved. 13078 19 CIS W R 08 / 2011 A M P, ACTIO N PIN , A M P-LATCH , A M P-O -LECTRIC, A M P-O -M ATIC, A M PLIM ITE, A M PM O D U, A M PO M ATO R, CERTI-CRIM P, CH A M PO M ATO R, PRO -CRIM PER, R-CA M , TE Connectivity and the TE connectivity (logo) are tradem arks. Teflon is a tradem ark of E.I. du Pont de N em ours and Com pany. O ther logos, product and Com pany nam es m entioned herein m ay be tradem arks of their respective ow ners. While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 Table of C ontents AM PM O D U Interconnection System PC /10 4 and PC /10 4- Plus C onnectors .0 50 x .0 50 [1.2 7 x 1.2 7] C enterline .0 50 x .10 0 [1.2 7 x 2 .54] C enterline AM PM OD U 2 m m C onnectors .10 0 x .10 0 [2 .54 x 2 .54] C enterline .12 5 x .12 5 [3.18 x 3.18] C enterline .156 [3.96] C enterline Shunts PC/1 04 and PC/1 04- P lus C onnectors 0.050 [1 .2 7] x 0.050 [1 .2 7] CEN TERLIN E AM PM O D U 50/50 G rid Board-to-Board Vertical Receptacles and H eaders: Board-to-Board Right-Angle H eaders: Right-A ngle Headers, D ouble Row, Latching and N on-Latching …………………… 1 9 Cable-to-Board Connectors: Receptacle C onnectors, D ouble Row, W ith and W ithout Latch ……………………… 21 .050 [1 .2 7] x 0.1 00 [2 .54] CEN TERLIN E Board-to-Board Connectors, Thru-H ole: Board-to-Board Connectors, Surface-M ount: Cable-to-Board Connectors, F F C Cable: Cable-to-Board Connectors, Ribbon Cable:

AM PM O D U 2 m m Connectors Headers, U nshrouded, D ouble Row, Thru-Hole M ount ……………………………… 66, 67 B reakaw ay Headers, U nshrouded, D ouble Row, Thru-Hole M ount ………………… 68-70 B reakaw ay Headers, U nshrouded, D ouble Row, Surface M ount …………………… 71 , 72 Stacking Header, U nshrouded, D ouble Row, Thru-Hole M ount ………………………… 73 Headers, Shrouded, D ouble Row, Thru-Hole, Right-A ngle M ount ………………… 74, 75 Headers, Shrouded, D ouble Row, Thru-Hole M ount w ith C able Shrouds ………… 78, 79 Receptacles, D ouble Row, Thru-Hole, Vertical M ount ………………………………… 80 , 81 Receptacles, D ouble Row, Surface M ount, Right-A ngle M ount ………………………… 82 Receptacles, D ouble Row, Thru-Hole, Right-A ngle M ount ……………………………… 83 Receptacles, D ouble Row, Surface M ount, Vertical M ount ……………………………… 84 .1 00 [2 .54] x .1 00 [2 .54] CEN TERLIN E Board-to-Board Solutions G uides, .1 00[2 .54] Centerline Products ………………… 89 W ire-to-Board Solutions G uide, .1 00[2 .54] Centerline Products ……………………… 89 Parallel Stacking G uide for Board-to-Board Applications …………………………… 91 Board-to-Board Products: B reakaw ay and Retention Headers-U nshrouded ……………………………… 1 0 1 -1 0 5 A pplication Tooling for A C TIO N PIN Posts …………………………………… 1 52, 1 53 A pplication Tooling for A M P A C TIO N PIN Stacking C onnectors ………………… 1 62 Horizontal M ount Receptacle A ssem blies, M od II ……………………………… 1 68-1 73 Vertical M ount Receptacle A ssem blies, M od II & M od IV ……………………… 1 74-1 84 Tw o-Piece Printed C ircuit B oard C onnectors …………………………………… 1 93 -20 2 W ire-to-Board Products: Surface M ount M TE Headers (Right-A ngle & Vertical) ……………………… 251 , 252 Interchangeable C ontacts, W ire C rim p (Snap-In) …………………………… 253 , 254 1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 Table of C ontents (Continued) AM PM O D U Interconnection System .050 x .050 [1.27 x 1.27] Centerline .050 x .100 [1.27 x 2.54] Centerline AMPMODU 2mm Connectors .100 x .100 [2.54 x 2.54] Centerline .125 x .125 [3.18 x 3.18] Centerline .156 [3.96] Centerline Shunts PC/104 and PC/104- Plus Connectors

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 Table of C ontents (Continued) AM PM O D U Interconnection System PC /10 4 and PC /10 4- Plus C onnectors .0 50 x .0 50 [1.2 7 x 1.2 7] C enterline .0 50 x .10 0 [1.2 7 x 2 .54] C enterline AM PM OD U 2 m m C onnectors .10 0 x .10 0 [2 .54 x 2 .54] C enterline .12 5 x .12 5 [3.18 x 3.18] C enterline .156 [3.96] C enterline Shunts .1 2 5 [3.1 8 ] x .1 2 5 [3.1 8 ] CEN TERLIN E W ire-to-Board Product: .1 56 [3.96] CEN TERLIN E M od I 0.031 x 0.062 Interconnection System Receptacles, Vertical and Horizontal B oard M ount …………………………… 285, 286 Receptacle A ssem blies, Vertical and Horizontal B oard M ount ………………… 287-289 Receptacle Housings, Standard Profile-U nkeyed (W ith/W ithout Strain Relief) … 291 , 292 Headers: Locking C lip C ontacts, C rim p Snap-In (W ire A pplied) ……………………………… 298 Locking C lip C onnector Housings, Single Row, C rim p Snap-In …………………… 299 Shunts R estriction on the use of H azardous Substances (R oH S) A t TE C onnectivity (TE) , w e’re ready to support your R oHS requirem ents. W e’ve assessed m ore than 1 .5 m illion end item s/ com ponents for R oHS com pliance, and issued new part num - bers w here any change w as required to elim inate the restricted m aterials. P art num bers in this catalog are identified as: R oH S C om pliant — P art num bers in this catalog are R oHS C om pliant, unless m arked otherw ise. T hese products com ply w ith European Union D irective 2 0 0 2 /95/E C as am ended 1 January 2 006 that restricts the use of lead, m ercury, cadm ium , hexavalent chrom ium , P B B , and P B D E in certain electrical and electronic products sold into the E U as of 1 J uly 2 0 0 6. NOTE: For purposes of this catalog, included w ithin the defini - tion of R oHS C om pliant are products that are clearly “Out of S cope” of the R oHS D irective such as hand tools and other non-electrical accessories. NOTE: Inform ation regarding RoHS com pliance is provided based on reasonable inquiry of our suppliers and represents our current actual know ledge based on the inform ation provided by our suppliers. This inform ation is subject to change. For latest com pliance status, refer to our w ebsite referenced at right. Getting the Inform ation You N eed Our com prehensive on-line R oHS C ustom er S upport C enter provides a forum to answ er your questions and support your R oHS needs. A R oHS FA Q (Frequently A sked Questions) is available w ith links to m ore detailed inform ation. You can also subm it RoHS questions and receive a response w ithin 2 4 hours during a norm al w ork w eek. T he S upport C enter also provides: I C ross-R eference from Non-com pliant to C om pliant P roducts I A bility to brow se R oHS C om pliant P roducts in our on-line catalog I D ow nloadable Technical D ata C ustom er Inform ation P resentation I M ore detailed inform ation regarding the definitions used above I S o w hatever your questions w hen it com es to R oH S , w e have the answ ers at w w w.te.com /leadfree RoHS Customer Support Center

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System PC/104 and PC/104- Plus Connectors PC /10 4 and PC /10 4- P lus C onnectors The PC /1 0 4 and PC /1 0 4- Plus connectors are industry standard product offerings w hich com ply w ith the interconnection require - m ents defined by the PC /1 0 4 organization (http://w w w.pc1 0 4.org) B oth products are designed specifically for “flat-rock” press-fit installation for ease of application. Solder ver - sion is also available. O ptional integral standoffs m inim ize the custom er’s system assem bly tim e. The TE offering of the standard PC /1 0 4 product is a unitized connector rather than the tw o piece, 40 and 64 position connectors currently on the m arket. C ustom er needs to stock and apply only one part num ber rather than tw o. Perform ance Specifications E lectrical C haracteristics M eets requirem ents of P C /1 0 4 and P C /1 0 4 - P lus standards N om inal R esistance — 1 0 m illiohm s m axim um , DR Insulation R esistance — 1 0 0 0 m egohm s m inim um D ielectric W ithstanding Voltage — 50 0 VA C for 1 m in. at sea level M echanical C haracteristics M eets requirem ents of P C /1 0 4 and P C /1 0 4 - P lus standards C urrent — S ignal application only Tem perature — –55° to 1 0 5°C M aterial and Finish H ousing — B lack T herm oplastic, UL

94 V-0

C ontact — P hosphor B ronze, Full G old all over Nickel (stackthrough), G old on m ating end, Tin or Tin-lead on P C B tail all over Nickel (non-stackthrough) N eed m ore inform ation? C all Technical Support 1 -80 0 -522-6752: Technical Support is staffed w ith specialists w ell versed in all TE products. The C enter can provide you w ith: I Technical Support I C atalogs I Technical D ocum ents I TE A uthorized D istributor Locations Technical D ocum ents Product Specifications 1 08-1 956 Application Specifications 1 1 4 -1 30 2 1 Connector Centerline Position P C /104 .1 00 104* 2.54 P C /104- P lus .079 120** 2.0 *Tw o circuits plugged per P C /104 specification. Other options available. ** One circuit plugged per P C /104- P lus specifica - tion. Other options available. Product Facts I Press fit design — elim inates hand soldering I Unitized PC /10 4 connector assem bly — elim inates tw o piece (64 pin & 40 pin) configuration I Integral board spacers w ith captive hardw are — eases & im proves assem bly efficiency w hile m inim izing stocked hardw are I “Flat-rock” insertable — no need for com plex insertion tooling I R ecognized by Underw riters' Laboratories to US and C anadian standards file N o. E 2 8476 I Fully com pliant w ith PC 10 4 & PC 10 4- P lus standards I Solutions available for lead free processes (ie. E N IG and silver im m ersion plated PC B 's)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System PC /10 4 and PC /10 4- P lus C onnectors PC /10 4, Press-Fit Stackthrough, N o Standoffs G old plated contacts* Part N o. 1375795-1 (keyed) , Part N o. 1375795-2 (unkeyed) G old plated contacts w ith Tin plated com pliant pin section** Part N o. 1375795-3 (keyed) , Part N o. 1375795-4 (unkeyed) .390 [9.90] .195 [4.95] Typ. 3.21 [81.60] 2.01 [51.11]Plugged Circuit Plugged Circuit Sq. Typ. .025 [0.64] Typ..100 [2.54] .483±.013 [12.27±0.34] Typ. .435 [11.05] Typ..100 [2.54] .300 [7.62] 3.10 [78.74] Recom m ended PC Board Layout See Custom er D raw ing for H ole G eom etry and Recom m ended Plating. K eyed .300 [7.62] 3.10 [78.74] U nkeyed N on-Stackthrough, N o Standoffs Tin-lead plated tails* Part N o. 1375796-1 (keyed) , Part N o. 1375796-2 (unkeyed) M atte tin plated tails** Part N o. 1375796-3 (keyed) , Part N o. 1375796-4 (unkeyed) Typ..100 [2.54] .119±.013 [3.03±0.34] Typ. .435 [11.05] Typ..100 [2.54] .390 [9.90] .195 [4.95] Typ. 3.21 [81.60] 2.01 [51.11]Plugged Circuit Plugged Circuit M aterial and Finish H ousing — G lass filled therm oplastic, B lack, 94 V-0 rated C ontacts Stackthrough — Phosphor B ronze; plated .00001 5 [0.00038] m in. G old on m ating receptacle end, .000005 [0.0001 30] m in. G old on rem ainder, all over .000050 [0.001 2 7] Nickel or Phosphor B ronze; plated .00001 5 [0.00038] m in. G old on m ating receptacle end, .0001 00-.0002 00 [0.0002 54 -.00508] m atte tin on com pliant section, .000005 {0.0001 30] m in. G old on rem ainder of post, all over .000050 [0.001 2 7] Nickel N on-Stackthrough — P hosphor B ronze; plated .00001 5 [0.00038] m in. G old on m ating receptacle end, .000 1 0 0 [0 .0 0 2 54 ] m atte tin or tin-lead on rem ainder, all over .0 00050 [0.001 2 7] Nickel Screw locks — S teel, C lear C hrom ate over Zinc N ote: A ll part num bers are R oH S com pliant. * For R oH S exem pt Tin-lead processes (including EN IG P lated P C B ’s) ** for S ilver Im m ersion processes or w here a total lead free solution is desired

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System PC/104 and PC/104- Plus Connectors PC /10 4, Press-Fit (Continued) .390 [9.90] .195 [4.95] Typ. 3.21 [81.60] Plugged Circuit Plugged CircuitBreakaway Standoffs 2.01 [51.11] Sq. Typ. .025 [0.64] Typ..100 [2.54] .483±.013 [12.27±0.34] Typ. .435 [11.05] Typ..100 [2.54] Typ..600 [15.24] Typ..100 [2.54] .119±.013 [3.03±0.34] Typ. .435 [11.05] Typ..100 [2.54] Typ..600 [15.24] .390 [9.90] .195 [4.95] Typ. 3.21 [81.60] Plugged Circuit Plugged CircuitBreakaway Standoffs 2.01 [51.11] .390 [9.90] .195 [4.95] Typ. 3.21 [81.60] 2.01 [51.11] Plugged Circuit Plugged Circuit Sq. Typ. .025 [0.64] Typ..100 [2.54] .483±0.13 [12.27±0.34] Typ. .435 [11.05] .100 [2.54] Typ. Typ..600 [15.24] .300 [7.62] .125 [3.18] 3.10 [78.74] 0.05 [1.27] Dia. 2 Plcs. U nkeyed Recom m ended PC Board Layout See Custom er D raw ing for H ole G eom etry and Recom m ended Plating. .300 [7.62] .125 [3.18] 3.10 [78.74] 0.05 [1.27] Dia. 2 Plcs. K eyed Typ..100 [2.54] .119±.013 [3.03±0.34] Typ. .435 [11.05] .100 [2.54] Typ. Typ..600 [15.24] .390 [9.90] .195 [4.95] Typ. 3.21 [81.60] 2.01 [51.11] Plugged Circuit Plugged Circuit Stackthrough, 2 Standoffs G old plated contacts* Part N o. 1375793-1 (keyed) , Part N o. 1375793-2 (unkeyed) G old plated contacts w ith Tin plated com pliant pin section** Part N o. 1375793-3 (keyed) , Part N o. 1375793-4 (unkeyed) N on-Stackthrough, 2 Standoffs Tin-lead plated tails* Part N o. 1375794-1 (keyed) , Part N o. 1375794-2 (unkeyed) M atte tin plated tails** Part N o. 1375794-3 (keyed) , Part N o. 1375794-4 (unkeyed) Stackthrough, 4 Standoffs G old plated contacts* Part N o. 1375791-1 (keyed) , Part N o. 1375791-2 (unkeyed) G old plated contacts w ith Tin plated com pliant pin section** Part N o. 1375791-3 (keyed) , Part N o. 1375791-4 (unkeyed) N on-Stackthrough, 4 Standoffs Tin-lead plated tails* Part N o. 1375792 -1 (keyed) , Part N o. 1375792 -2 (unkeyed) M atte tin plated tails** Part N o. 1375792 -3 (keyed) , Part N o. 1375792 -4 (unkeyed) N ote: A ll part num bers are R oH S com pliant. * For R oH S exem pt Tin-lead processes (including EN IG P lated P C B ’s) ** for S ilver Im m ersion processes or w here a total lead free solution is desired

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System PC /10 4 and PC /10 4- P lus C onnectors PC /10 4- P lus , Press-Fit 2.37 [60.30] .315 [8.00] Plugged Circuit (-3 or -6 only) Plugged Circuit (-2 or -5 only) .015 [0.39] Sq. Typ. .020 [0.51] Typ..079 [2.00] .368 [9.35] .483±.013 [12.27±0.34] Typ. Typ..079 [2.00] .236 [6.00] 2.28 [58.0] Recom m ended PC Board Layout for 1 375799-1 , 1 375799-4, 1 3758 00-1 , 1 3758 00-4 .236 [6.00] 2.28 [58.0] Recom m ended PC Board Layout for 1 375799-2 , 1 375799-5, 1 3758 00-2 , 1 3758 00-5 .236 [6.00] 2.28 [58.0] Recom m ended PC Board Layout for 1 375799-3, 1 375799-6, 1 3758 00-3, 1 3758 00-6 Typ..079 [2.00] .368 [9.35] .112±.013 [2.85±0.34] Typ. Typ..079 [2.00] 2.37 [60.30] .315 [8.00] Plugged Circuit (-3 or -6 only) Plugged Circuit (-2 or -5 only) .015 [0.39] See Custom er D raw ing for H ole G eom etry and Recom m ended Plating. (Including EN IG plated PCB's) Stackthrough, N o Standoffs G old plated contacts* Part N o. 1375799-1 (unkeyed) Part N o. 1375799-2 (keyed-A1 ) per PC/1 0 4 - P lus specification Part N o. 1375799-3 (keyed-D 30 ) per PC/1 0 4 - P lus specification G old plated contacts w ith Tin plated com pliant pin section** Part N o. 1375799-4 (unkeyed) Part N o. 1375799-5 (keyed-A1 ) per PC/1 0 4 - P lus specification Part N o. 1375799-6 (keyed-D 30 ) per PC/1 0 4 - P lus specification N on-Stackthrough, N o Standoffs Tin-lead plated tails* Part N o. 137580 0 -1 (unkeyed) Part N o. 137580 0 -2 (keyed-A1 ) per PC/1 0 4 - P lus specification Part N o. 137580 0 -3 (keyed-D 30 ) per PC/1 0 4 - P lus specification M atte tin plated tails** Part N o. 137580 0 -4 (unkeyed) Part N o. 137580 0 -5 (keyed-A1 ) per PC/1 0 4 - P lus specification Part N o. 137580 0 -6 (keyed-D 30 ) per PC/1 0 4 - P lus specification N ote: A ll part num bers are R oH S com pliant. * For R oH S exem pt Tin-lead processes (including EN IG P lated P C B ’s) ** for S ilver Im m ersion processes or w here a total lead free solution is desired M aterial and Finish H ousing — G lass filled therm oplastic, B lack, 94 V-0 rated C ontacts Stackthrough — Phosphor B ronze; plated .00001 5 [0.00038] m in. G old on m ating receptacle end, .000005 [0.0001 30] m in. G old on rem ainder, all over .000050 [0.001 2 7] Nickel or Phosphor B ronze; plated .00001 5 [0.00038] m in. G old on m ating receptacle end, .0001 00-.0002 00 [0.0002 54 -.00508] m atte tin on com pliant section, .000005 {0.0001 30] m in. G old on rem ainder of post, all over .000050 [0.001 2 7] Nickel N on-Stackthrough — P hosphor B ronze; plated .00001 5 [0.00038] m in. G old on m ating receptacle end, .000 1 0 0 [0 .0 0 2 54 ] m atte tin or tin-lead on rem ainder, all over .0 00050 [0.001 2 7] Nickel Screw locks — S teel, C lear C hrom ate over Zinc

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System PC/104 and PC/104- Plus Connectors PC /10 4- P lus , Press-Fit (Continued) Typ.0.79 [2.00] .112±.013 [2.85±0.34] .600 [15.24] Typ. Typ. .368 [9.35] Typ. 0.79 [2.00] .315 [8.00] .015 [0.39] 2.37 [60.30] Plugged Circuit (-3 and -6 only) Plugged Circuit (-2 and -5 only) Recom m ended PC Board Layout for 1 375797-1 , 1 375797-4, 1 375798 -1 , 1 375798 -4 Recom m ended PC Board Layout for 1 375797-2 , 1 375797-5, 1 375798 -2 , 1 375798 -5 Recom m ended PC Board Layout for 1 375797-3, 1 375797-6, 1 375798 -3, 1 375798 -6 .315 [8.00] .015 [0.39] 2.37 [60.30] Plugged Circuit (-3 and -6 only) Plugged Circuit (-2 and -5 only) Sq. Typ. .020 [0.51] Typ.0.79 [2.00] .483±.013 [12.27±0.34] .600 [15.24] Typ. Typ. .368 [9.35] Typ. .079 [2.00] See Custom er D raw ing for H ole G eom etry and Recom m ended Plating. Stackthrough, 2 Standoffs G old plated contacts* Part N o. 1375797-1 (unkeyed) Part N o. 1375797-2 (keyed-A1 ) per PC/1 0 4 - P lus specification Part N o. 1375797-3 (keyed-D 30 ) per PC/1 0 4 - P lus specification G old plated contacts w ith Tin plated com pliant pin section** Part N o. 1375797-4 (unkeyed) Part N o. 1375797-5 (keyed-A1 ) per PC/1 0 4 - P lus specification Part N o. 1375797-6 (keyed-D 30 ) per PC/1 0 4 - P lus specification N on-Stackthrough, 2 Standoffs Tin-lead plated tails* Part N o. 1375798-1 (unkeyed) Part N o. 1375798-2 (keyed-A1 ) per PC/1 0 4 - P lus specification Part N o. 1375798-3 (keyed-D 30 ) per PC/1 0 4 - P lus specification M atte tin plated tails** Part N o. 1375798-4 (unkeyed) , Part N o. 1375798-5 (keyed-A1 ) per PC/1 0 4 - P lus specification Part N o. 1375798-6 (keyed-D 30 ) per PC/1 0 4 - P lus specification N ote: A ll part num bers are R oH S com pliant. * For R oH S exem pt Tin-lead processes (including EN IG P lated P C B ’s) ** for S ilver Im m ersion processes or w here a total lead free solution is desired

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System PC /10 4 and PC /10 4- P lus C onnectors PC /10 4, Solder N ote: A ll part num bers are R oH S com pliant. .390 [9.90] .195 [4.95] Typ. 3.21 [81.60] 2.01 [51.11] Plugged Circuit Plugged Circuit .300 [7.62] 3.10 [78.74] U nkeyed .300 [7.62] 3.10 [78.74] .041±.003 [1.03±0.08] Dia. 102 Plcs. Plated Through Hole K eyed N on-Stackthrough, N o Standoffs Part N o. 1375963-3 (keyed) Part N o. 1375963-4 (unkeyed) Typ..100 [2.54] .119±.013 [3.03±0.34] Typ. .435 [11.05] Typ..100 [2.54] .390 [9.90] .195 [4.95] Typ. 3.21 [81.60] 2.01 [51.11]Plugged Circuit Plugged Circuit N on-Stackthrough, 4 Standoffs Part N o. 1375959-3 (keyed) Part N o. 1375959-4 (unkeyed) Typ..100 [2.54] .119±.013 [3.03±0.34] Typ. .435 [11.05] Typ..100 [2.54] Typ..600 [15.24] .390 [9.90] .195 [4.95] Typ. 3.21 [81.60] Plugged Circuit Plugged CircuitBreakaway Standoffs 2.01 [51.11] N on-Stackthrough, 2 Standoffs Part N o. 1375961-3 (keyed) Part N o. 1375961-4 (unkeyed) Typ..100 [2.54] .119±.013 [3.03±0.34] Typ. .435 [11.05] .100 [2.54] Typ. Typ..600 [15.24] .300 [7.62] .125 [3.18] 3.10 [78.74] 0.05 [1.27] Dia. 2 Plcs. .040±.003 [1.01±0.08] Dia. 102 Plcs. Plated Through Hole K eyed Recom m ended PC Board Layout Recom m ended PC Board Layout .300 [7.62] .125 [3.18] 3.10 [78.74] 0.05 [1.27] Dia. 2 Plcs. U nkeyed M aterial and Finish H ousing — G lass filled therm oplastic, B lack, 94 V-0 rated C ontacts N on-Stackthrough — P hosphor B ronze; plated .00001 5 [0.00038] m in. G old on m ating receptacle end, .000 1 0 0 [0 .0 0 2 54 ] m atte tin on rem ainder, all over .0 0 0 0 50 [0.001 2 7] Nickel Screw locks — S teel, C lear C hrom ate over Zinc

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System PC/104 and PC/104- Plus Connectors PC /10 4- P lus , Solder N ote: A ll part num bers are R oH S com pliant. N on-Stackthrough, 2 Standoffs Part N o. 1375965-4 (unkeyed) Part N o. 1375965-5 (keyed-A1 ) per PC/1 0 4 - P lus specification Part N o. 1375965-6 (keyed-D 30 ) per PC/1 0 4 - P lus specification .315 [8.00] .015 [0.39] 2.37 [60.30] Plugged Circuit (-6 only) Plugged Circuit (-5 only) Typ..079 [2.00] .112±.013 [2.85±0.34] .600 [15.24] Typ. Typ. .368 [9.35] Typ. 0.79 [2.00] Recom m ended PC Board Layout for 1 375965-5 Recom m ended PC Board Layout for 1 375965-6 .236 [6.00] 2.28 [58.0] .035±.003 [0.88±0.08] Dia. 120 Plcs. Plated Through Hole Recom m ended PC Board Layout for 1 375967-4 .236 [6.00] 2.28 [58.0] .035±.003 [0.88±0.08] Dia. 119 Plcs. Plated Through Hole Recom m ended PC Board Layout for 1 375967-5 .236 [6.00] 2.28 [58.0] .035±.003 [0.88±0.08] Dia. 119 Plcs. Plated Through Hole Recom m ended PC Board Layout for 1 375967-6 N on-Stackthrough, N o Standoffs Part N o. 1375967-4 (unkeyed) Part N o. 1375967-5 (keyed-A1 ) per PC/1 0 4 - P lus specification Part N o. 1375967-6 (keyed-D 30 ) per PC/1 0 4 - P lus specification Typ..079 [2.00] .368 [9.35] .112±.013 [2.85±0.34] Typ. Typ..079 [2.00] 2.37 [60.30] .315 [8.00] Plugged Circuit (-6 only) Plugged Circuit (-5 only) .015 [0.39] .035±.003 [0.88±0.08] Dia. 119 Plcs. Plated Through Hole .035±.003 [0.88±0.08] Dia. 119 Plcs. Plated Through Hole Recom m ended PC Board Layout for 1 375965-4 M aterial and Finish H ousing — G lass filled therm oplastic, B lack, 94 V-0 rated C ontacts N on-Stackthrough — P hosphor B ronze; plated .00001 5 [0.00038] m in. G old on m ating receptacle end, .000 1 0 0 [0 .0 0 2 54 ] m atte tin on rem ainder, all over .0 0 0 0 50 [0.001 2 7] Nickel Screw locks — S teel, C lear C hrom ate over Zinc

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System PC /10 4 and PC /10 4- P lus C onnectors Accessories N ote: A ll part num bers are R oH S com pliant. Shroud, PC /10 4- P lus Part N o. 137580 1-1 M aterial — P B T, B lack Organizer, PC /10 4 Part N um ber 14452 51-1 M aterial — P olyester, P B T, B lack 2.45 [62.34] 2.53 ± 0.10 [64.36 ± 0.25] .450 ± .010 [11.43 ± 0.25] .370 [9.41] Typ..079 [2.00] Typ..039 [1.00].440 ± .003 [11.18 ± 0.08] Typ..255 [6.47] 2.39 [60.76] .333 [8.46] Kit Packaging Part N um bers Keyed Circuits Keyed Circuits Keyed Circuits .10 [2.54] Typ. .05 [1.27] Typ. 2.01 [51.11] 3.21 [81.60] .195 [4.95] Typ. .390 [9.90] Part N o. 1 445441 -3 Part N o. 1 445440-3 Part N o. 1 445439-3 Com ponent Part N um ber Part N um ber Connector Assem bly O rganizer Style 1445441-3 137 57 95-3 1445251-1 Keyed 1445441-4 137 57 95-4 1445251-1 U nkeyed 1445440-3 137 57 93-3 1445251-1 Keyed 1445440-4 137 57 93-4 1445251-1 U nkeyed 1445439-3 137 57 91-3 1445251-1 Keyed 1445439-4 137 57 91-4 1445251-1 U nkeyed

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U 50 /50 Grid C onnector System Board-to-Board Vertical Receptacles and Headers Produced under a Q uality M anagem ent System certi - fied to ISO 90 0 1 A copy of the certificate is available upon request. V ertical H eaders, B oard-to-B oard (Page 16 ) V ertical H eaders, B oard-to-B oard (Page 16 ) R ight-A ngle H eaders, B oard-to-B oard (Page 19) V ertical H eaders, B oard-to-B oard (Page 16 ): .250 [6 .35] S tack H eight .320 [8 .13] S tack H eight .390 [9.91] S tack H eight V ertical R eceptacles, B oard-to-B oard (Page 15) V ertical R eceptacles, B oard-to-B oard (Page 15) R eceptacles, C able-to-B oard, W ith L atch (Page 21) R eceptacles, C able-to-B oard W ithout L atch (Page 21) ISO Certified9001

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System B oard-to-B oard Vertical R eceptacles and H eaders B oard-to-B oard Vertical R eceptacles and H eaders Product Facts I Surface-m ount products for parallel board-to-board applications, as w ell as right-angle board-to-board and cable-to-board

applications

I H igh density .0 50 x .0 50 [1.2 7x1.2 7] centerline grid I Three board-to-board stack heights: .2 50 [6.35], .32 0 I N on-protrusive m etallic holddow ns I R eliable dual beam receptacle contacts for redundant contact I D uplex plated receptacle and post contacts; gold plated on m ating areas, tin plated on tails I C om patible w ith standard surface-m ount processing (VPR and IR ) I R eceptacle and header allow for drainage of processing fluids I Tape and reel packaging available. C ontact TE for details I Polarized header and recep - tacle assem blies I Sizes of 10 , 2 0 , 30 , 40 , 50 , 60 , 70 , 80 and 10 0 positions I R ecognized under the C om ponent Program of Underw riters Laboratories Inc ., File N o. E 2 8476 I C ertified by C anadian Standards Association File N o. LR 7189 A M PM O D U 50 /50 G rid Vertical Headers and Receptacles are designed for parallel board-to-board stacking in high density applications. Right-angle board-to-board and cable-to-board applications are also possible, since the vertical receptacles also m ate w ith non-latching right-angle headers (page 1 9) and the vertical headers also m ate w ith non-latching cable connectors. A vailable are double row, vertical shrouded headers and receptacles in sizes ranging from 1 0 through 1 0 0 positions (in 1 0 position increm ents). Parallel board-to-board stack heights of .250 [6.3 5], .3 20 [8.1 3 ] and .3 90 [9.91 ] are achievable by selection of the appropriate header. The receptacle is the sam e for all three stack height headers. N on-protrusive m etallic holddow ns are designed for use in .0 62 [1 .57] or thicker PC boards and allow surface m ounting to both sides of the board. In addition to providing retention during processing, the holddow ns are soldered during reflow and therefore provide long-term strain relief for the solder joints. A M PM O D U 50 /50 G rid Vertical Headers and Receptacles are designed to be com patible w ith standard surface-m ount processes; IR (infrared) and VPR (vapor phase reflow ). The surface-m ount connectors have been designed so that dim ensioning, tolerances, referenced datum s, holddow n characteristics and packaging m ethods result in a system that is com patible w ith robotic assem bly. The headers and receptacles feature polarization to prevent m isalignm ent. Three B oard Stack H eights N on-Protrusive M etallic H olddow ns .2 50±.006 [6 .35±0.15 ] .32 0±.006 [8 .13±0.15] .390±.006 [9.91±0.15] R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System B oard-to-B oard Vertical R eceptacles, D ouble R ow , .0 50 x .0 50 [1.2 7 x 1.2 7] C enterline N ote: A ll part num bers are R oH S com pliant. Vertical Receptacles, Double Row M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .00 0 0 30 [0 .0 0 0 76] gold in m ating area, .00 0 1 50 [0 .0 0 381 ] tin on solder tail, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel H olddow n — C opper alloy; plated .00 0 1 50 [0 .0 0 381 ] tin over .000050 [0.0 0 1 2 7] nickel R elated Product D ata M ating H eaders — pages 1 6, 1 9 PC B oard Layouts — page 1 7 Perform ance Specifications — page 2 4 Technical D ocum ents — page 2 4 Product Specification 1 08-1 332 Application Specification 1 1 4 -70 1 0 Packaging: Tube or Tape and R eel N o. of D im ension Receptacle Pos. A Part N um bers Tube Tape and Reel* N o H old D ow n w /Vacuum Cover 10 .2 66 [6 .7 5] 5-1046 52-1 5-147 38 4-1 5-147 413-1 20 .51 6 [13.11] 5-1046 52-2 5-147 38 4-2 5-147 413-3 30 .766 [19.46 ] 5-1046 52-3 5-147 38 4-3 5-147 413-4 40 1 .01 6 [25.8 1] 5-1046 52-4 5-147 38 4-4 — 50 1 .2 66 [32.16 ] 5-1046 52-5 5-147 38 4-5 5-147 413-2 6 0 1 .51 6 [38 .51] 5-1046 52-6 5-147 38 4-6 — 7 0 1 .766 [44.8 6 ] 5-1046 52-7 5-147 38 4-7 — 8 0 2 .01 6 [51.21] 5-1046 52-8 5-147 38 4-8 — 100 2 .51 6 [6 3.91] 6 -1046 52-0 5-147 38 4-9 — * Parts packaged in tape and reel have vacuum pick and place cover. S ee P C B oard L ayout on page 17 . Polarizing Tab (For Polarization to M ating H eader) A .02 8 [0.7 1] .1 8 7 [4.7 5] .1 2 0 [3.05] .050 [1.27 ] .050 [1.27 ] .050 [1.27 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Vertical H eaders, D ouble R ow M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .00 0 0 30 [0 .0 0 0 76] gold in m ating area, .00 0 1 50 [0 .0 0 381 ] tin on solder tail, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel H olddow n — C opper alloy; plated .00 0 1 50 [0 .0 0 381 ] tin over .000050 [0.0 0 1 2 7] nickel R elated Product D ata M ating R eceptacles — page 1 5, 2 1 (w ithout latch only) PC B oard Layouts — page 1 7 Perform ance Specifications — page 2 4 Technical D ocum ents — page 2 4 Product Specification 1 0 8-1 332 Application Specification 1 1 4 -70 1 0 Packaging: Tube or Tape and R eel N o. of D im ension H eader Part N um bers Pos. A Tubes Tape & Reel* Tubes Tape & Reel* Tubes Tape & Reel* H old D ow n N o H old D ow n H old D ow n N o H old D ow n 10 .372 [9.44] 5-1046 55-1 5-147 38 1-1 5-147 121-1 5-1046 56 -1 5-147 38 2-1 5-1046 93-1 — 5-147 38 3-1 20 .62 2 [15.7 9] 5-1046 55-3 5-147 38 1-2 5-147 121-2 5-1046 56 -2 5-147 38 2-2 5-1046 93-2 — 5-147 38 3-2 30 .8 72 [22.14] 5-1046 55-4 5-147 38 1-3 — 5-1046 56 -3 5-147 38 2-3 5-1046 93-3 — 5-147 38 3-3 40 1 .1 2 2 [28 .49] 5-1046 55-5 5-147 38 1-4 — 5-1046 56 -4 5-147 38 2-4 5-1046 93-4 — 5-147 38 3-4 50 1 .372 [34.8 4] 5-1046 55-6 5-147 38 1-5 — 5-1046 56 -5 5-147 38 2-5 5-1046 93-5 — 5-147 38 3-5 6 0 1 .62 2 [41.19] 5-1046 55-7 5-147 38 1-6 — 5-1046 56 -6 5-147 38 2-6 5-1046 93-6 — 5-147 38 3-6 7 0 1 .8 72 [47 .54] 5-1046 55-8 5-147 38 1-7 — 5-1046 56 -7 5-147 38 2-7 5-1046 93-7 — 5-147 38 3-7 8 0 2 .1 2 2 [53.8 9] 5-1046 55-9 5-147 38 1-8 — 5-1046 56 -8 5-147 38 2-8 5-1046 93-8 — 5-147 38 3-8 100 2 .62 2 [6 6 .59] 6 -1046 55-1 5-147 38 1-9 — 6 -1046 56 -0 5-147 38 2-9 6 -1046 93-0 5-147 503-1 5-147 38 3-9 *Parts packaged in tape and reel have vacuum pick and place cover. S ee P C B oard L ayout on page 17 . F or .2 50 [6.35] M ated H eight F or .32 0 [8 .1 3] M ated H eight F or .390 [9.91 ] M ated H eight .050 [1.27 ] .050 [1.27 ] .050 [1.27 ] .030 [0.7 6 ] .030 [0.7 6 ] .050 [1.27 ] .2 2 55 [5.7 28 ] .2 2 5 [5.7 1] .2 975 [7 .557 ] .3675 [9.335] A A A .030 [0.7 6 ] .050 [1.27 ] B oard-to-B oard Vertical H eaders, D ouble R ow , .0 50 x .0 50 [1.2 7 x 1.2 7] C enterline

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R ecom m ended PC B oard Layouts for Vertical C onnectors N ote: A ll part num bers are R oH S com pliant. Recommended PC Board Layouts N o. of Receptacle D im ensions H eader D im ensions Pos. BC D B C D D D .02 9 [0.7 4] B S paces at .050 [1.27 ] = C B S paces at .050 [1.27 ] = C C of Pattern D etail A D etail A C of Pattern .061 [1.54] .050 [1.27 ] .1 62 [4.11] .1 8 2 [4.6 2] .091 [2.31] .1 1 0 [2.7 9] .050 [1.27 ] .060 [1.52] .065 [1.6 5] .1 30 [3.30] .02 9 [0.7 4] L L H eaders R eceptacles N ote: R efer to TE C ustom er D raw ings for additional P C board layout inform ation and dim ensional tolerances. .01 0 [0.25] 4 P lc. D etail A

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System B oard-to-B oard R ight-Angle H eaders B oard-to-B oard R ight-Angle H eaders A M PM O D U 50 /50 G rid Right-A ngle Headers w ill accom m odate a variety of high density packaging applications; right-angle board-to-board applications w hen m ated w ith vertical receptacles (page 1 5) and right-angle cable-to-board applications w hen m ated w ith cable connectors (page 21 ). The sm all .0 50 x .0 50 [1 .27 x 1 .27] centerline contact spacing allow s efficient use of the PC board area. M echanical support of the headers to the PC board is provided by non-protrusive m etallic holddow ns designed for .0 62 [1 .57] or thicker PC boards. These holddow ns are of the sam e design as those used in the vertical headers (page 1 6) and receptacles (page 1 5). There are also m etallic tabs that are soldered to the sur - faces of the PC board pads for added support. A M PM O D U 50 /50 G rid Right-A ngle Headers are available in double-row, in either latching or non- latching versions, and in sizes ranging from 1 0 through 1 0 0 positions (in 1 0 position increm ents). The latching version provides positive retention w hen m ated w ith the latching cable connector (page 21 ). A ll headers feature polariza - tion to help prevent m is - alignm ent during m ating. Product Facts I Surface-m ount products for right-angle board-to-board and cable-to-board I D ouble-row , right-angle shrouded headers I H igh density .0 50 x .0 50 [1.2 7 x 1.2 7] centerline grid I Latching and non-latching versions available I N on-protrusive m etallic holddow ns I M etallic tabs, w hen soldered to PC board pad, provide added m echanical support I D uplex plated post contacts; gold plated on m ating area, tin plated on tails I C om patible w ith standard surface-m ount processing (VPR and IR ) I Standoffs on header housings allow for drainage of processing fluids I All headers are polarized I Sizes of 10 , 2 0 , 30 , 40 , 50 , 60 , 70 , 80 and 10 0 positions I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association File N o. LR 7189 R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System B oard-to-B oard R ight-Angle H eaders, D ouble R ow , .0 50 x .0 50 [1.2 7 x 1.2 7] C enterline N ote: A ll part num bers are R oH S com pliant. Right-Angle Headers, Double Row, Latching and Non-Latching M aterial and Finish H ousing — L iquid crystal polym er, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .000381 ] tin on solder tail, w ith entire contact under - plated .0 0 0 0 50 [0 .0 0 1 2 7] nickel H olddow n — C opper alloy; plated .00 0 0 1 50 [0 .0 0 381 ] tin over .000050 [0.0 0 1 2 7] nickel R elated Product D ata M ating R eceptacles — page 1 5, 2 1 Perform ance Specifications — page 2 4 Technical D ocum ents — page 2 4 Product Specification 1 08-1 4 4 3 Application Specification 1 1 4 -70 1 0 Packaging: Tube Recom m ended PC Board Layout N o. of D im ensions H eader Pos. Part N um bers AB C D Latching N on-Latching A .430 [10.92] .340 [8 .6 4] .305 [7 .7 5] B S paces at .02 5 = C[0.6 4] .08 5 [2.16 ] .1 40 [3.56 ] .1 75 [4.45] D .1 00 [2.54] M in .063 [1.57 ] (2 P lc) .1 90 [4.8 3] (2 P lc) .047 D ia [1.19] P lated-Thru H ole (2 P lc) .1 36 [3.45] (2 P lc) .050 [1.27 ] .352 [8 .94] .2 1 3 [5.41] .050 [1.27 ] .050 [1.27 ] Typ. .02 9 [0.7 4] Typ .065 [1.6 5] Typ. N ote: R efer to TE C ustom er D raw ings for additional P C board layout inform ation and dim ensional tolerances. N on-Latching H eader Latching H eader

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 C able-to-B oard C onnectors C able-to-B oard C onnectors Product Facts I D ouble-row receptacle connectors provide cable- to-board connection capabilities for vertical headers (non-latching) and right-angle headers (latching and non-latching) I ID C (Insulation D isplacem ent C rim p) m ass term ination of solid or stranded round conductor .0 50 [1.2 7] centerline ribbon cable w ith PVC or polyethylene insulation I Accom m odates ribbon cable conductor sizes of 2 8 AW G [0 .0 8-0 .0 9 m m 2 ] and 30 AW G [0 .0 5 m m 2 ] and insulation diam eters up to .0 36 [0 .91] m axim um I R eliable single beam receptacle contact design I D uplex plated receptacle contacts; gold plated in m ating area, tin in term ination area I Term inating covers (sold separately) provide both strain relief and protection to the term ination area I Sizes of 10 , 2 0 , 30 , 40 , 50 , 60 , 70 , 80 and 10 0 positions I C onnectors available w ith or w ithout m etal latch I C onnectors w ithout latches are polarized to help prevent m ism ating I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association File N o. LR 7189 These double-row cable connectors, w ith a .0 50 x .0 50 [1 .27 x 1 .27] centerline contact spacing, provide cable-to-board connection capabilities for the A M PM O D U 50 /50 G rid C onnector System . C able connectors w ithout a latch w ill m ate w ith the vertical headers (page 1 6), w hile cable connectors w ith or w ithout a latch can be used to m ate w ith the right-angle headers (page 1 9). The cable connectors feature reliable single- beam ID C (insulation displacem ent crim p) contacts w hich are duplex plated w ith .0 0 0 0 3 0 [0 .0 0 0 76] gold. These contacts can be m ass term inated to either solid or stranded round conductor ribbon cable w ith conductor sizes of 28 A W G [0 .0 8-0 .0 9 m m 2] and 3 0 A W G [0 .0 5 m m 2] and a m axim um insulation diam eter of .0 3 6 [0 .91 ]. D uring term ination, the term inating covers, w hich m ust be purchased separately, assist in guiding the w ire into the ID C contacts, then provide strain relief w hen fully seated. A ctual term ination is accom plished w ith the TE m anual tooling show n on page 23 . The latching version of the cable connector is equipped w ith a m etal latch w hich provides positive retention of the receptacle cable connector w hen m ated w ith a surface- m ounted right-angle header. The cable connector w ithout a m etal latch features polarization to help prevent m ism ating. A ll connectors are available in sizes ranging from 1 0 through 1 0 0 positions (in 1 0 position increm ents). R R AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System C able-to-B oard R eceptacle C onnectors, D ouble R ow , .0 50 x .0 50 [1.2 7 x 1.2 7] C enterline N ote: A ll part num bers are R oH S com pliant. Receptacle Connectors, Double Row, With and Without Latch M aterial and Finish H ousing — T herm oplastic, black,

94 V-0 rated

Latch — S tainless steel C ontacts — P hosphor bronze; duplex plated .0 0 0 0 30 [0 .0 0 0 76] m inim um gold in m ating area, .0 0 01 50 [0.00381 ] m inim um tin on solder tail, w ith entire contact underplated .0 0 0050 [0.001 2 7] m inim um nickel R elated Product D ata M ating H eaders — page 1 6, 1 9 (latching) Term inating C overs (M ust be Purchased Separately, 2 R equired per C onnector) — page 2 2 Term ination Tooling — page 2 3 Perform ance Specifications — page 2 4 Technical D ocum ents — page 2 4 Product Specification 1 08-1 4 4 3 Application Specification 4 0 8-981 7, 4 0 8-990 9 Packaging: Tube A N o. of D im ensions Receptacle Pos. Part N um bers AB C D W ith Latch W ithout Latch .2 8 0 [7 .11] .62 7 [15.94] .690 [17 .56 ] D .1 2 0 [3.05] B S paces at .050 [1.27 ] = C .2 8 4 [7 .21] .32 7 [8 .31] .050 [1.27 ] .050 [1.27 ] Typ

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 Term inating C overs for C able C onnectors N ote: A ll part num bers are R oH S com pliant. C able C onnector Term inating C over, D ouble R ow M aterial G lass-filled therm oplastic, black, 94 V-0 rated R elated Product D ata C onnectors used w ith C overs — page 2 1 Term ination Tooling — page 2 3 Technical D ocum ents — page 2 4 Product Specification 1 08-1 4 4 3 Application Specification 4 0 8-981 7, 4 0 8-990 9 Packaging: P lastic bag N o. of D im ension Term inator Cover Pos. A Part N um bers 10 .565 [14.35] 1048 91-1 20 .8 1 5 [20.7 0] 1048 91-2 30 1 .065 [27 .05] 1048 91-3 40 1 .31 5 [33.8 2] 1048 91-4 50 1 .565 [39.7 5] 1048 91-5 6 0 1 .8 1 5 [46 .10] 1048 91-6 7 0 2 .065 [52.45] 1048 91-7 8 0 2 .31 5 [58 .8 0] 1048 91-8 100 2 .8 1 5 [7 1.50] 1-1048 91-0 N ote: Term inating covers m ust be purchased separately, tw o are required for each cable connector. .2 77 [7 .04] .1 91 [4.8 5] A AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for C able C onnectors N ote: A ll part num bers are R oH S com pliant. IDC (Insulation Displacement Crimp) Tooling M anual M iniature Application F ram e Assem bly 91 2 95-1 w ith Cover Closing K it 54351 8 -1 The M anual M iniature A pplication F ram e A ssem bly 91 295-1 , equipped w ith a C over C losing Kit 543 51 8-1 , is used for the ID C term ina - tion of ribbon cable to the cable connectors show n on page 21 . Prior to term ination, the covers m ust be partially assem bled onto a connec - tor housing, the cable inserted betw een the cov - ers and contacts and the covers preclosed by hand, clam ping the cable in place. In the M anual M iniature A pplication F ram e A ssem bly, the covers are fully seated to com plete the m ass term ination and pro - vide strain relief for the com pleted connection. F or tooling inform ation, call Technical Support C enter 1 -8 00-52 2 -6752 . N ote: R efer to Tyco Electonics Instruction S heets 408 -98 17 (Fram e A ssem bly 91295-1) and 408 -9909 (C over C losing K it 543518 -1) for com plete term ination/tooling infor - m ation.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Perform ance Specifications N ote: A ll part num bers are R oH S com pliant. Perform ance Specifications/ Technical D ocum ents B oard-to-B oard C onnectors, Vertical and R ight-Angle M ating Force: 6.4 oz (1 .78 N ] m ax. per contact Unm ating Force: 1 .0 oz [0.2 8 N ] m in. per contact D urability: Tested to 2 00 cycles m in. C urrent R ating: (30 °C T rise): .5 am pere per contact Operating Tem perature R ange: -65°C to + 1 05°C Term ination R esistance: 1 6 m illiohm s m ax. (initial) Insulation R esistance: 5000 m egohm s m in. (initial) D ielectric W ithstanding Voltage: 300 VA C C able-to-B oard C onnectors M ating Force: 6.4 oz (1 .78 N ] m ax. per contact Unm ating Force W ithout Latch: .5 oz [0.1 4 N ] m in. per contact D urability: Tested to 2 00 cycles m in. C urrent R ating: (1 0 °C T rise): .5 am pere per contact Operating Tem perature R ange: -65°C to + 1 05°C Term ination R esistance: 2 5 m illiohm s m ax. (initial and final) Insulation R esistance: 5000 m egohm s m in. (initial) D ielectric W ithstanding Voltage: 300 VA C Technical D ocum ents Various technical docum ents are available for your use: Product Specifications describe technical perform ance characteristics and verification tests. They are intended for the D esign, C om ponent and Q uality E ngineer. 1 0 8-1 3 3 2 A M PM O D U 50 /50 G rid Vertical B oard-to-B oard C onnectors 1 0 8-1 443 A M PM O D U 50 /50 G rid Right-A ngle B oard-to-B oard and C able C onnectors Application Specifications describe requirem ents for using the product in its intended application and/or crim ping inform ation. They are intended for the Packaging and D esign E ngineer and the M achine Setup Person. 1 1 4-70 1 0 A M PM O D U 50 /50 G rid C onnector System Instruction Sheets provide instructions for assem bling or applying the product. They are intended for the M anufacturing A ssem bler or O perator. 40 8-981 7 M anual M iniature A pplication F ram e A ssem bly 91 295-1 40 8-990 9 C over C losing Kit 543 51 8-1

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U System 50 C onnectors AMPMODU System 50 The A M PM O D U System 50 connector fam ily includes a w ide variety of high density board-to-board (thru-hole and surface-m ount) and cable-to-board connectors. A M PM O D U System 50 is com posed of one- and tw o- row receptacles and post headers on .0 50 x .1 0 0 [1 .27 x 2.54] spacing betw een contacts for extrem e density and efficient use of printed circuit board area. A M PM O D U System 50 receptacles and header assem blies can be categorized in three groups: board-m ount headers, board-m ount receptacles and cable-to-board receptacles. Receptacle contacts and m ating .0 1 5 [0 .3 8] square posts are form ed from high conductivity copper alloy and are selectively plated w ith gold to prom ote higher perform ance and reliability. B oard-m ounted thru-hole post headers and receptacle connectors are available for right-angle and vertical m ating configurations. Surface- m ounted connectors are available in vertical, double row styles for parallel stacking applications. Shrouded post headers provide polarization to m ating cable receptacles and aid alignm ent of m ating connectors. U nshrouded headers allow close stacking of daughter cards. Vertical stacking connectors space parallel m ated boards as show n in the illustration on page 63 . Housings on all board- m ount assem blies are m ade of high tem perature tolerant m aterials and incorporate stand-offs for free drainage of flux cleaning solutions. C able-to-board connectors have integral latches for positive locking to shrouded m ating headers (thru-hole or surface-m ount). Ribbon cable connectors m ass term inate 3 0 A W G [0 .0 5 m m 2] solid and 3 2 A W G [0 .0 3 m m 2] stranded, .0 25 [0 .64] centerline ribbon cable w ith PVC or Teflon ® insulation. C onnectors for m ass term ination to F F C cable or flexible etched circuitry have dual beam contacts; options include shielded cable and solder tabs. B oth types of cable connectors are available as com ponent parts and as com pleted assem blies. The variety of com ponents and application possibilities, com bined w ith sm all size and outstanding quality, m ake A M PM O D U System 50 suitable for high density system s. I R ecognized under the C om ponent Program of Underw riters Laboratories Inc. File N o. E 2 8476 I C ertified by C anadian Standards Association*, File N o. LR 7189 *CSA certification pending on certain products, as noted. D im ensioning: Dim ensions are in inches and m illim eters. Values in brackets are m etric equivalents. M etric sym bols used are: m m (m illim eter) cm (centim eter) m (m eter) m m 2 (square m illim eter) C (Celsius) N (new ton) kg (kilogram ) I Produced under a Q uality M anagem ent System certified to ISO 90 0 1 A copy of the certificate is available upon request. R R ISO Certified9001 Teflon ® is a tradem ark of E.I. du Pont de N em ours and Com pany.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 Thru-H ole H eaders––Shrouded, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard B oard-to-B oard C onnectors, Thru-H ole Product Facts I H igh density; contacts spaced on .0 50 x .10 0 [1.2 7 x 2 .54] centers I Single row ; select sizes 4 thru 50 positions I D ouble row ; select sizes 10 thru 10 0 positions I Stand-offs for ease of cleaning I H igh tem perature tolerant therm oplastic housings I Shrouded and unshrouded headers available in single and double row , vertical and right-angle configurations The A M PM O D U System 50 interconnection system is designed to better m eet industry’s need for a high density interconnect system . The B oard M ounted Thru-Hole Headers are available in shrouded and unshrouded versions. They are com posed of single and double row post headers w ith .0 50 x .1 0 0 [1 .27 x 2.54] spacing betw een contacts for extrem e density and efficient use of printed circuit board area. The headers are available in 4 through 50 positions, in a single row configuration, and 1 0 through 1 0 0 positions, in a double row design. B oard m ounted post headers are available in right-angle and vertical configurations. Shrouded post headers provide polarization and alignm ent features for m ating printed circuit boards and cable connectors, w hile unshrouded headers allow close stacking of daughter cards. Housings for the headers are m ade of black therm oplastic m aterial w ith a 94V-0 rating. The housings have stand-offs for free drainage of flux cleaning solutions. AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 Thru-H ole H eaders––Shrouded, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) N ote: A ll part num bers are R oH S com pliant. Headers, Shrouded and Unshrouded Single R ow , R ight-Angle w ith Solder C lips M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance C haracteristics — page 63 M ateable C onnectors — pages 38, 4 9 & 50 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 N o. of D im ension Part N um bers Pos. A 4 .330 [8 .38 ] 5-10407 4-7 5 .38 0 [9.6 5] 5-10407 4-2 6 .430 [10.92] 5-10407 4-8 8 .530 [13.46 ] 6 -10407 4-0 10 .630 [16 .00] 5-10407 4-1 12 .730 [18 .54] 6 -10407 4-1 15 .8 8 0 [22.35] 5-10407 4-3 20 1 .1 30 [28 .7 0] 5-10407 4-4 22 1 .2 30 [31.24] 6 -10407 4-4 25 1 .38 0 [35.05] 5-10407 4-5 28 1 .530 [38 .8 6 ] 7 -10407 4-0 30 1 .630 [41.40] 5-10407 4-6 36 1 .930 [49.02] 6 -10407 4-6 40 2 .1 30 [54.10] 6 -10407 4-7 45 2 .38 0 [6 0.45] 6 -10407 4-8 50 2 .630 [6 6 .8 0] 6 -10407 4-9 *C ircuit identification feature om itted on 4, 5 and 6 position headers. N otes: 1. S older C lips located as show n for 10 through 30 position headers. 2. S older C lips located as show n for 4 through 8 and 36 through 50 position headers. Circuit Identification F eature* See N ote 2 . See N ote 1 . Solder Clip .1 00 [2.54] .060 [1.52] 2 P lc. AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 N ote: A ll part num bers are R oH S com pliant. H eaders, Shrouded and Unshrouded Single R ow , Vertical M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 50 [0 .0 0 1 2 7] nickel R elated Product D ata Perform ance C haracteristics — page 63 M ateable C onnectors — pages 38, 4 9 & 50 B oard-to-B oard Spacing — page 63 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 Part N um bers 4 .330 [8 .38 ] 5-10407 1-7 — 5 .38 0 [9.6 5] 5-10407 1-2 — 6 .430 [10.92] 5-10407 1-8 — 8 .530 [13.46 ] 6 -10407 1-0 — 10 .630 [16 .00] 5-10407 1-1 — 12 .730 [18 .54] 6 -10407 1-1 5-1048 04-3 13 .78 0 [19.8 1] 6 -10407 1-2 — 15 .8 8 0 [22.35] 5-10407 1-3 5-1048 04-2 17 .98 0 [24.8 9] 6 -10407 1-3 — 20 1 .1 30 [28 .7 0] 5-10407 1-4 — 22 1 .2 30 [31.24] 6 -10407 1-4 — 25 1 .38 0 [35.05] 5-10407 1-5 — 30 1 .630 [41.40] 5-10407 1-6 — 36 1 .930 [49.02] 6 -10407 1-6 — 40 2 .1 30 [54.10] 6 -10407 1-7 — 50 2 .630 [6 6 .8 0] 6 -10407 1-9 — *C ircuit identification feature om itted on 4, 5, and 6 position headers. .060 [1.52] 2 P lc. Circuit Identification F eature* Post Length (S ee chart below ) Thru-H ole H eaders––Shrouded, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 N ote: A ll part num bers are R oH S com pliant. Headers, Shrouded and Unshrouded Thru-H ole H eaders––Shrouded, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) D ouble R ow , R ight-Angle w ith Solder C lips M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance C haracteristics — page 63 M ateable C onnectors — pages 4 0, 4 5, 51 , 52 , & 56 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 Part N um bers 8 .330 [8 .32] 5-10406 9-8 — 10 .38 0 [9.6 5] 5-10406 9-4 6 -10447 7 -2 12 .430 [10.92] — 5-10447 7 -8 14 .48 0 [12.19] 6 -10406 9-0 — 16 .530 [13.46 ] 6 -10406 9-1 — 20 .630 [16 .00] 5- 10406 9-1 5- 10447 7 -2 24 .730 [18 .54] 6 -10406 9-2 6 -10447 7 -0 26 .78 0 [19.8 1] 6 -10406 9-3 — 30 .8 8 0 [22.35] 5-10406 9-5 5-10447 7 -3 34 .98 0 [24.8 9] 6 -10406 9-4 — 40 1 .1 30 [28 .7 0] 5-10406 9-6 5-10447 7 -4 50 1 .38 0 [35.05] 5-10406 9-2 5-10447 7 -5 6 0 1 .630 [41.40] 5-10406 9-7 5-10447 7 -9 6 8 1 .8 30 [46 .48 ] 6 -10406 9-8 — 7 2 1 .930 [49.02] 6 -10406 9-6 5-10447 7 -1 8 0 2 .1 30 [54.10] 5-10406 9-3 5-10447 7 -6 100 2 .630 [6 6 .8 0] 6 -10406 9-7 5-10447 7 -7 *C ircuit identification feature om itted on 8 , 10 and 12 position headers. N otes: 1. S older C lips located as show n for 16 through 100 position headers. 2. S older C lips located as show n for 8 through 12 and 6 0 through 100 position headers. .060 [1.52] 2 P lc. Circuit Identification F eature* Post Length (S ee chart below ) Solder Clip See N ote 2 . See N ote 1 . AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 N ote: A ll part num bers are R oH S com pliant. H eaders, Shrouded and Unshrouded Thru-H ole H eaders––Shrouded, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) D ouble R ow , Vertical M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontact — C opper alloy; duplex plated .00 0 0 30 [0 .0 0 0 76] gold in m ating area, .00 0 1 50 [0 .0 0 381 ] tin on solder posts, w ith entire contact underplated .000050 [0.0 0 1 2 7]nickel R elated Product D ata Perform ance Specifications — page 63 M ateable C onnectors — pages 4 0, 4 5, 51 , 52 , & 56 B oard-to-B oard Spacing — page 63 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 Part N um bers N o. of D im ension Post Length Pos. A 10 .38 0 [9.6 5] 5-10406 8 -2 — 12 .430 [10.92] 5-10406 8 -8 — 14 .48 0 [12.19] 5-10406 8 -9 — 16 .530 [13.46 ] 6 -10406 8 -0 5-1046 6 6 -9 20 .630 [16 .00] 5-10406 8 -1 5-1046 6 6 -1 24 .730 [18 .54] 6 -10406 8 -1 6 -1046 6 6 -0 26 .78 0 [19.8 1] 6 -10406 8 -2 — 30 .8 8 0 [22.35] 5-10406 8 -3 5-1046 6 6 -2 34 .98 0 [24.8 9] 6 -10406 8 -3 — 40 1 .1 30 [28 .7 0] 5-10406 8 -4 5-1046 6 6 -3 44 1 .2 30 [31.24] 6 -10406 8 -4 — 50 1 .38 0 [35.05] 5-10406 8 -5 5-1046 6 6 -4 6 0 1 .630 [41.40] 5-10406 8 -6 5-1046 6 6 -7 6 8 1 .8 30 [46 .48 ] 6 -10406 8 -8 5-1046 6 6 -8 7 2 1 .930 [49.02] 6 -10406 8 -5 — 8 0 2 .1 30 [54.10] 6 -10406 8 -6 5-1046 6 6 -5 100 2 .630 [6 6 .8 0] 6 -10406 8 -7 5-1046 6 6 -6 *C ircuit identification feature om itted on 10 and 12 position headers. .060 [1.52] 2 P lc. Circuit Identification F eature* Post Length (S ee chart below ) AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Headers, Shrouded and Unshrouded Thru-H ole H eaders––Shrouded, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) D ouble R ow , Vertical W ith C ard Slots M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance Specifications — page 63 M ateable C onnectors — page 39 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 N o. of D im ension Part Pos. A N um bers 10 .394 [10.01] 5-10407 6 -5 20 .644 [16 .36 ] 5-10407 6 -1 30 .8 94 [22.7 1] 5-10407 6 -6 40 1 .1 44 [29.06 ] 5-10407 6 -3 50 1 .394 [35.41] 5-10407 6 -7 6 0 1 .644 [41.7 6 ] 5-10407 6 -2 8 0 2 .1 44 [54.46 ] 5-10407 6 -4 100 2 .644 [6 7 .16 ] 5-10407 6 -8 Circuit Identification F eature .1 2 5 [3.18 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. H eaders, Shrouded and Unshrouded Thru-H ole H eaders––Unshrouded, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard Single R ow , R ight-Angle M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance C haracteristics — page 63 M ateable C onnectors — pages 37, 38, 4 9, & 50 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 N o. of D im ension Part Pos. A N um bers 4 .2 1 5 [5.46 ] 5-10418 6 -1 8 .41 5 [10.54] 5-10418 6 -5 12 .61 5 [15.6 2] 5-10418 6 -7 15 .765 [19.43] 5-10418 6 -9 17 .8 65 [21.97 ] 6 -10418 6 -0 20 1 .01 5 [25.7 8 ] 6 -10418 6 -1 25 1 .2 65 [32.13] 6 -10418 6 -3 30 1 .51 5 [38 .48 ] 6 -10418 6 -5 31 1 .565 [39.7 5] 7 -10418 6 -0 40 2 .01 5 [51.18 ] 6 -10418 6 -7

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Headers, Shrouded and Unshrouded Thru-H ole H eaders––Unshrouded, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) Single R ow , Vertical M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance Specifications — page 63 M ateable C onnectors — pages 37, 38, 4 9, & 50 B oard-to-B oard Spacing — page 63 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 N o. of D im ension Part Pos. A N um bers 4 .2 1 5 [5.46 ] 5-10417 8 -1 6 .31 5 [8 .00] 5-10417 8 -3 8 .41 5 [10.54] 5-10417 8 -5 10 .51 5 [13.08 ] 5-10417 8 -6 20 1 .01 5 [25.7 8 ] 6 -10417 8 -1 25 1 .2 65 [32.13] 6 -10417 8 -3 .1 00 [2.54] .1 2 5 [3.18 ] .01 5 [0.38 ] .050 Typ. [1.27 ] A .1 00 [2.54] .048 [1.22] .096 [2.44]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 N ote: A ll part num bers are R oH S com pliant. H eaders, Shrouded and Unshrouded Thru-H ole H eaders––Unshrouded, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) D ouble R ow , R ight-Angle M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance Specifications — page 63 M ateable C onnectors — pages 39, 4 0, 4 5, 51 & 52 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 N o. of D im ension Part Pos. A N um bers 10 .2 65 [6 .7 3] 5-104118 -3 20 .51 5 [13.08 ] 5-104118 -7 30 .765 [19.43] 6 -104118 -0 40 1 .01 5 [25.7 8 ] 6 -104118 -2 50 1 .2 65 [32.13] 5-104118 -1 6 0 1 .51 5 [38 .48 ] 6 -104118 -4 8 0 2 .01 5 [51.18 ] 6 -104118 -6 100 2 .51 5 [6 3.8 8 ] 6 -104118 -7 AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Headers Shrouded and Unshrouded Thru-H ole H eaders––Unshrouded, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) D ouble R ow , Vertical M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance C haracteristics — page 63 M ateable C onnectors — pages 39, 4 0, 4 5, 51 , & 52 B oard-to-B oard Spacing — page 63 PC B oard H ole Layout — page 4 2 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 N o. of D im ension Part Pos. A N um bers 8 .2 1 5 [5.46 ] 5-103916 -3 20 .51 5 [13.08 ] 5-103916 -2 30 .765 [19.43] 5-103916 -9 36 .91 5 [23.24] 6 -103916 -8 40 1 .01 5 [25.7 8 ] 6 -103916 -1 50 1 .2 65 [32.13] 6 -103916 -3 6 0 1 .51 5 [38 .48 ] 6 -103916 -4 8 0 2 .01 5 [51.18 ] 6 -103916 -6 100 2 .51 5 [6 3.8 8 ] 6 -103916 -7 .1 2 5 [3.18 ] .01 5 [0.38 ] .1 00 [2.54] .1 00 [2.54] .050 [1.27 ] Typ. .1 00 [2.54] .1 96 [4.98 ] .048 [1.22]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacles Thru-H ole R eceptacles, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard Product Facts I H igh density; contacts spaced on .0 50 x .10 0 [1.2 7 x 2 .54] centers I R ight-angle and vertical styles I Single row ; select sizes 5 thru 50 positions I D ouble row ; select sizes 10 thru 10 0 positions I C ontacts are selectively plated w ith gold I Stand-offs for rem oval of solder flux The A M PM O D U System 50 thru-hole receptacles offer a w ide variety of high density board-to-board connectors. The .0 50 [1 .27] spacing betw een each contact provides an extrem ely dense interconnect package and results in a m ore efficient use of the printed circuit board space. A M PM O D U System 50 thru-hole receptacles are available in right-angle and vertical configurations and are com posed of single and double row versions. The single row versions are available in select sizes of 5 thru 50 positions and double row in positions from 1 0 thru 1 0 0 . Receptacle contacts and m ating .0 1 5 [0 .3 8] square posts are form ed from high conductivity copper alloy and are selectively plated w ith gold for higher perform ance and reliability. The receptacle housings are m ade of black therm oplastic, w ith a 94V-0 rating to w ithstand high tem peratures of reflow soldering and incorporate stand-offs for free drainage of flux cleaning solutions.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Receptacles Thru-H ole R eceptacles, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) Single R ow , R ight-Angle W ith Solder C lips M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance Specifications — page 63 M ateable C onnectors — pages 32 & 33 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 N o. of D im ension Part Pos. A N um bers 10 .544 [13.8 2] 5-104196 -2 15 .794 [20.17 ] 5-104196 -4 20 1 .044 [26 .52] 5-104196 -5 N otes: 1. S older C lips located as show n for 10 through 25 position receptacles. 2. S older C lips located as show n for 5 and 25 position receptacles. Circuit Identification F eature See N ote 2 . See N ote 1 . Solder Clip

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. R eceptacles Thru-H ole R eceptacles, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) Single R ow , Vertical N o. of D im ension Part Pos. A N um bers 10 .544 [13.8 2] 5-104192-2 12 .644 [16 .35] 5-104192-3 15 .794 [20.17 ] 5-104192-4 20 1 .044 [26 .52] 5-104192-5 30 1 .544 [39.22] 5-104192-7 Circuit Identification F eature M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance Specifications — page 63 M ateable C onnectors — pages 2 7, 2 8, 32 , & 33 B oard-to-B oard Spacing — page 63 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Receptacles Thru-H ole R eceptacles, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) D ouble R ow , R ight-Angle M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance C haracteristics — page 63 M ateable C onnectors — pages 31 , 34 & 35 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31 N o. of D im ension Part Pos. A N um bers 10 .2 94 [7 .47 ] 5-103911-1 20 .544 [13.8 2] 5-103911-2 30 .794 [20.17 ] 5-103911-7 40 1 .044 [26 .52] 5-103911-5 50 1 .2 94 [32.8 7 ] 5-103911-4 6 0 1 .544 [39.22] 5-103911-3 8 0 2 .044 [51.92] 5-103911-6 100 2 .544 [6 4.6 2] 5-103911-8 N otes: 1. S older C lips located as show n for 20 through 100 position receptacles. 2. S older C lips located as show n for 10, 6 0, 8 0 and 100 position receptacles. Circuit Identification F eature See N ote 2 . See N ote 1 . Solder Clip

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. R eceptacles Thru-H ole R eceptacles, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard (Continued) D ouble R ow , Vertical Part N um bers N o. of D im ension Post Length Pos. A 10 .2 94 [7 .47 ] 5-10407 8 -3 — 20 .544 [13.8 2] 5-10407 8 -1 — 24 .644 [16 .36 ] 5-10407 8 -9 — 30 .794 [20.17 ] 5-10407 8 -4 — 34 .8 94 [22.7 1] 6 -10407 8 -0 — 40 1 .044 [26 .52] 5-10407 8 -2 — 50 1 .2 94 [32.8 7 ] 5-10407 8 -5 5-1047 44-7 6 0 1 .544 [39.22] 5-10407 8 -6 — 6 8 1 .744 [44.30] 6 -10407 8 -3 — 8 0 2 .044 [51.92] 5-10407 8 -7 5-1047 44-4 100 2 .544 [6 4.6 2] 5-10407 8 -8 5-1047 44-5 Circuit Identification F eature Post Length (S ee chart below ) M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder posts, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata Perform ance Specifications — page 63 M ateable C onnectors — pages 2 9, 30, 34 , 35 & 4 4 B oard-to-B oard Spacing — page 63 PC B oard H ole Layout — page 4 1 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 31

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R ecom m ended PC B oard H ole Layouts, Thru-H ole B oard-to-B oard C onnectors PC Board Hole Layouts Single R ow , R ight-Angle w ith Solder C lips N ote: C onsult TE for custom er draw ings detailing tolerances. * This dim ension is for S hrouded, S ingle R ow R ight-A ngle H eaders only. ** This dim ension is for S ingle R ow R ight-A ngle R eceptacles only. D ouble R ow , R ight-Angle w ith Solder C lips N ote: C onsult TE for custom er draw ings detailing tolerances. * This dim ension is for S hrouded, D ouble R ow R ight-A ngle H eaders only. This dim ension is for D ouble R ow R ight-A ngle R eceptacles only. N o. of D im ensions Pos. BC D E .037 D ia. [0.94] Typ. (S oldered m echanical solder clip) P lated-Thru H ole .02 2 D ia. [0.56 ] Typ. P lated-Thru H ole P C B oard Edge .02 2 D ia. [0.56 ] Typ. P lated-Thru H ole P C B oard Edge .335 [8 .51] N o. of D im ensions Pos. BC D E .037 D ia. [0.94] Typ. (S oldered m echanical solder clip) P lated-Thru H ole

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R ecom m ended PC B oard H ole Layouts, Thru-H ole B oard-to-B oard C onnectors (Continued) PC B oard H ole Layouts Single R ow W ithout Solder C lips N ote: C onsult TE for custom er draw ings detailing tolerances. D ouble R ow W ithout Solder C lips N ote: C onsult TE for custom er draw ings detailing tolerances. N o. of D im ension Pos. B 4 .1 50 [3.8 1] 5 .2 00 [5.08 ] 6 .2 50 [6 .35] 8 .350 [8 .8 9] 10 .450 [11.43] 12 .550 [13.97 ] 13 .600 [15.24] 15 .700 [17 .7 8 ] N o. of D im ension Pos. B 8 .1 50 [3.8 1] 10 .2 00 [5.08 ] 12 .2 50 [6 .35] 14 .300 [7 .6 2] 16 .350 [8 .8 9] 20 .450 [11.43] 24 .550 [13.97 ] 26 .600 [15.24] 30 .700 [17 .7 8 ] 34 .8 00 [20.32] N o. of D im ension Pos. B 36 .8 50 [21.59] 40 .950 [24.13] 44 1 .050 [26 .6 7 ] 50 1 .2 00 [30.48 ] 6 0 1 .450 [36 .8 3] 6 8 1 .650 [41.91] 7 2 1 .750 [44.45] 8 0 1 .950 [49.53] 100 2 .450 [6 2.23] .02 2 D ia. [0.56 ] TYP . P lated-Thru H ole .02 2 D ia. [0.56 ] TYP . P lated-Thru H ole N o. of D im ension Pos. B 17 .8 00 [20.32] 20 .950 [24.13] 22 1 .050 [26 .6 7 ] 25 1 .2 00 [30.48 ] 30 1 .450 [36 .8 3] 31 1 .500 [38 .10] 36 1 .750 [44.45] 40 1 .950 [49.53] 50 2 .450 [6 2.23]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Surface-M ount C onnectors, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard Board-to-Board Connectors, Surface-Mount Product Facts I Surface-m ount option for parallel board-to-board applications; com pletely interm ateable w ith AM PM OD U System 50 thru-hole board-to-board and cable-to-board system s I D ouble row , vertical, shrouded header and receptacle assem blies I Available in select sizes from 10 through 10 0 positions I H igh D ensity; contacts spaced on .0 50 x .10 0 [1.2 7 x 2 .54] centers; com pact footprint I C om patible w ith standard surface-m ount processes I Stand-offs for free drainage of flux cleaning solutions; visible solder joints for easy inspection I Sim ple, low insertion-force holddow n for process retention and long-term strain relief for solder joints I Available in tape and reel packaging (w ith vacuum covers) for autom atic placem ent. The high-density surface- m ount connector is another m ounting option in the A M PM O D U System 50 connector fam ily. This surface-m ount system is fully interm ateable w ith the A M PM O D U System 50 thru-hole and cable-to- board connectors. A dditionally, the design of the m ating interface has not been changed, m aintaining the sam e high reliability as the thru-hole product. The surface-m ount system includes double row, vertical, shrouded header and receptacle assem blies in select sizes from 1 0 through 1 0 0 positions. It m eets the tight dim ensional requirem ents of surface- m ount technology. The sim ple, low insertion-force holddow n provides both processing retention and long-term strain relief for the solder joints in the headers and receptacles.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Surface-M ount H eaders, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard N ote: A ll part num bers are R oH S com pliant. H eaders D ouble R ow , Vertical M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder tail, w ith entire contact under - plated .0 0 0 0 50 [0 .0 0 1 2 7] nickel H olddow n — C opper alloy, plated .00 0 1 50 [0 .0 0 381 ] tin over .000050 [0.0 0 1 2 7] nickel R elated Product D ata Perform ance C haracteristics — page 63 M ateable C onnectors — pages 4 0, 4 5, 51 , 52 , & 56 B oard-to-B oard Spacing — page 63 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 35 Recom m ended PC Board Layout N o. of D im ensions Part N um bers Pos. Pkg in Pkg in AB C D E Tube Tape & Reel* *Parts packaged in tape and reel are w ithout hold dow ns and include a vacuum pick and place cover .042 ±.003 (P lated-Thru H ole) H oles for holddow ns are not required for parts packaged in tape and reel. A±.003 [.08 ] .057±.01 0 [1.45±.25] .435±.007 [11.05±.18 ] .1 00 [2.54] .050 [1.27 ] Typ. .045 [1.14] R ef. .031 ±.01 0 [.7 9±.25] .2 8 4 .053±.006 [1.35±0.15] .1 2 5 [3.18 ] D etail A

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Surface-M ount R eceptacles, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, B oard-to-B oard N ote: A ll part num bers are R oH S com pliant. Receptacles, Surface Mount D ouble R ow , Vertical M aterial and Finish H ousing — G lass-filled therm polastic, black, 94 V-0 rated C ontacts — P hosphor bronze; duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold in m ating area, .0 0 0 1 50 [0 .00381 ] tin on solder tail, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel H olddow n — C opper alloy; duplex plated .0 0 0 1 50 [0 .0 0 381 ] tin over .00 0 0 50 [0 .0 0 1 2 7] nickel R elated Product D ata Perform ance C haracteristics — page 63 M ateable C onnectors — pages 2 9, 30, 34 , 35 & 4 4 B oard-to-B oard Spacing — page 63 Technical D ocum ents — page 64 Product Specification 1 08-1 093 Application Specification 1 1 4 -2 50 35 N o. of D im ensions Part N um bers Pos. ABC Pkg in Tube Pkg in Tape & Reel* *Parts packaged in tape and reel are w ithout hold dow ns and include a vacuum pick and place cover Recom m ended PC Board Layout .042 ±.003 D ia.Typ. [1.07 ±0.08 ] (P lated-Thru hole) H oles for holddow ns are not required for parts packaged in tape and reel. .02 5 [0.6 4] R ef. .1 2 5±.008 [3.18 ±0.20] 2 P lc. .1 00 [2.54] A .053±.006 [1.35±0.15] .370±.003 [9.40±0.08 ] .050 [1.27 ] .065±.001 [1.6 5±0.03] D ia. Typ. (Pad) .2 8 5 [7 .24] R ef.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System C able-to-B oard C onnectors, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline FFC C able C able-to-B oard C onnectors, FFC C able The cable-to-board .0 50 [1 .27] center F F C receptacle connectors are part of the A M PM O D U System 50 fam ily for term inating flexible flat conductor cable and flexible etched circuitry. The F F C receptacle uses a dual beam contact w ith 3 0 m icroinches of gold plating. The F F C receptacle connectors have an integral latch for positive locking to shrouded m ating headers. F lexible flat conductor cable is a planar parallel conductor cable. It can be used as a one-to-one connector or as a com plex harness, allow ing split-outs and special routing. The cable is com prised of .0 26 [0 .66] w ide x .0 0 3 [0 .0 8] thick conductors m ade of copper per Q Q -C -50 2 and insulated w ith a flam e retardant polyester film . The F F C contacts are available in receptacle and Product Facts I Signal application only, 1.5 am peres m axim um single circuit I Single or double row connectors I Term inates flexible flat conductor cable and flexible etched circuitry I Shielded cable provides for custom izing I C enter latch housing providing positive latching solder tab. Receptacle contacts are m ade of phosphor bronze w ith a finish of plated gold duplex, w hile the solder tab contacts are finished in a bright tin-lead overall. The com plete product line provides solder tabs for board m ounting at low cost and custom shielding of the cable.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System C able-to-B oard C onnectors, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline FFC C able] (Continued) Flexible Flat Conductor Cable C ustom D esigned C able Assem blies TE can supply custom ized flexible flat conductor cable assem blies using the com - ponents show n on pages 48 thru 54. Typical exam - ples of these cable assem - blies are show n to the right. A nd, to m eet the internal shielding requirem ents of today’s com plex electronic equipm ent, custom designed shielded F F C cable assem blies can be m ade to your specific specifications. S ingle R ow R eceptacle H ousing S older Tabs S ingle R ow R eceptacle H ousing D ouble R ow R eceptacle H ousing FFC C able, .050 [1.27 ] C enterline FFC C able, .050 [1.27 ] C enterline S older Tabs

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System FFC C ontacts, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. FC C C ontacts .72 5 [18 .42] .008 5 [0.22] .01 6 [0.41] B D A ccepts .015 [0.38 ] S q. Post M aterial and Finish P hosphor bronze; plated gold duplex or bright tin-lead overall (See chart.) R elated Product D ata Perform ance C haracteristics — page 63 H ousings — pages 4 9-52 Application Tooling — page 60-62 Technical D ocum ents — page 64 Product Specification 1 08-1 602 2 Application Specification 1 1 4 -1 60 0 8 R eceptacle Solder Tab Contacts Application Tooling D im ensions Part N um bers Type Config. Part N o./ M achine M achine W ith F inish B C* D Program m er R eceptacle S trip 1-48 7 547 -1 1 — .52 0 .72 5 [13.21] [18 .42] S trip 48 7 923-4 2 .2 45 .48 0 .68 5 S older Tab S trip 48 7 923-5 3 .2 45 .48 0 .68 5 224910-4 318 6 19-4 S trip 48 7 940-4 2 .1 1 0 .345 .550 224910-6 318 6 19-6 C ontact S plice S trip 48 7 941-4 4 —— .38 5 [9.7 8 ] R eceptacle S trip 1-48 7 547 -2 5 — .52 0 .72 5 [13.21] [18 .42] tact underplated .000050 [0.00127 ] m in. nickel. contact underplated .000050 [0.00127 ] m in. nickel. 5D uplex P lated .000150 [0.00038 ] gold on m ating area, .000100 [0.00254] m in bright tin in crim p area, w ith entire con - tact underplated .000050 [0.00127 ] m in. nickel. *A fter cut-off from carrier strip. Receptacle Strip Solder Tab Strip D .1 00 [2.54] Typ. .2 1 1 [5.36 ] M ax. .008 5±.0005 L ocalized P late A rea 4

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Single R ow R eceptacle H ousings, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, C able-to-B oard Receptacle Housings M aterial and Finish H ousing — B lack therm oplastic, flam e retardant, 94 V-0 rated R elated Product D ata Perform ance C haracteristics — page 63 R eceptacle C ontacts — page 4 8 M ateable H eaders — pages 2 7, 2 8, 32 & 33 Technical D ocum ents — page 64 Product Specification 1 08-1 602 2 Application Specification 1 1 4 -1 60 0 8 Plain Style H ousings Latch Style H ousings .58 5 [14.8 6 ] B B .58 5 [14.8 6 ] .050 Typ [1.27 ] Typ. .047 [1.19] (2 P ls.) .2 75 [6 .98 ] A .2 94 [7 .47 ] .098 [2.49] A .047 [1.19] (2 P ls.) .098 [2.49] .050 Typ [1.27 ] Typ. Plain Style H ousings Latch Style H ousings

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Single R ow R eceptacle H ousings, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, C able-to-B oard (Continued) N ote: A ll part num bers are R oH S com pliant. R eceptacle H ousings L atch S tyle H ousing A M P M OD U S ystem 50 H eader, S hrouded (R ight-A ngle Post show n for ref. only.) A M P M OD U S ystem 50 H eader, U nshrouded (S traight Post show n for ref. only.) Post R em oved P lain H ousings, S tacked S ide-to-S ide (S ee N ote 1 below.) P lain H ousing, S tacked End-to-End (S ee N otes 1 & 2 below.) Typical Cable-to-Board Application of Latch Style Receptacle H ousing Typical Cable-to-Board Application of Plain Receptacle H ousing N otes: 1. P lain housings are side-to-side stackable on either straight or right-angle posted, unshrouded A M P M OD U S ystem 50 headers. N otes: 2. For end-to-end stacking, the posts located betw een the adjoining housings m ust be rem oved to provide housing end clearance. N o. of D im ensions Part N um bers Pos. AB Plain Receptacle H ousing Latch Style Receptacle H ousing 4 .1 50 [3.18 ] .2 44 [6 .20] 48 7 544-1 48 7 545-1 5 .2 00 [5.08 ] .2 94 [7 .47 ] 48 7 544-2 48 7 545-2 6 .2 50 [6 .35] .344 [8 .7 4] 48 7 544-3 48 7 545-3 7 .300 [7 .6 2] .394 [10.01] 48 7 544-4 48 7 545-4 8 .350 [8 .8 9] .444 [11.28 ] 48 7 544-5 48 7 545-5 10 .450 [11.43] .544 [13.8 2] 48 7 544-7 48 7 545-7 12 .550 [13.97 ] .644 [16 .36 ] 48 7 544-9 48 7 545-9 13 .600 [15.24] .694 [17 .6 3] — 1-48 7 545-0 15 .700 [17 .7 8 ] .794 [20.17 ] 1-48 7 544-2 1-48 7 545-2 16 .750 [19.05] .8 44 [21.44] 1-48 7 544-3 — 17 .8 00 [20.32] .8 94 [22.7 1] 1-48 7 544-4 1-48 7 545-4 20 .950 [24.13] 1 .044 [26 .52] 1-48 7 544-7 1-48 7 545-7 22 1 .050 [26 .6 7 ] 1 .1 44 [29.06 ] 1-48 7 544-9 1-48 7 545-9 25 1 .2 00 [30.48 ] 1 .2 94 [32.8 7 ] 2-48 7 544-2 2-48 7 545-2 26 1 .2 50 [31.7 5] 1 .343 [34.11] — 2-48 7 545-3 28 1 .350 [34.29] 1 .443 [36 .6 5] — 2-48 7 545-5 30 1 .450 [36 .8 3] 1 .544 [39.22] — 2-48 7 545-7 36 1 .750 [44.45] 1 .8 44 [46 .8 4] 3-48 7 544-3 3-48 7 545-3 40 1 .950 [49.53] 2 .044 [51.92] — 3-48 7 545-7 45 2 .2 00 [55.8 8 ] 2 .2 94 [58 .27 ] — 4-48 7 545-2 50 2 .450 [6 2.23] 2 .544 [6 4.6 2] 4-48 7 544-7 4-48 7 545-7 N ote: Other sizes of receptacle housings (plain and latch style) can be m ade available, consult TE.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System D ouble R ow R eceptacle H ousings, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, C able-to-B oard Receptacle Housings M aterial B lack therm oplastic, flam e retardant, Perform ance C haracteristics — page 63 R eceptacle C ontacts — page 4 8 M ateable H eaders — pages 2 9, 30, 34 , 35, & 4 4 Technical D ocum ents — page 64 Product Specification 1 08-1 602 2 Application Specification 1 1 4 -1 60 0 8 Plain Style H ousings B .050 Typ [1.27 ] Typ. .047 [1.19] (2 P lc.) .1 00 [2.54] .1 98 [5.03] A .58 5 [14.8 6 ] Plain .050 Typ [1.27 ] Typ. .047 [1.19] (2 P lc.) .1 00 [2.54] .1 98 [5.03] .375 [9.53] A B .58 5 [14.8 6 ] Latch Plain Style H ousings Latch Style H ousings Latch Style H ousings

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System D ouble R ow R eceptacle H ousings, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, C able-to-B oard (Continued) N ote: A ll part num bers are R oH S com pliant. R eceptacle H ousings L atch S tyle H ousing (S how n) A M P M OD U S ystem 50 H eader, S hrouded (R ight-A ngle Post show n for ref. only.) A M P M OD U S ystem 50 H eader, U nshrouded (S traight Post show n for ref. only.) Post R em oved P lain H ousing, S tacked End-to-End (S ee N otes 1 & 2 below.) Typical Cable-to-Board Application of Plain Receptacle H ousing Typical Cable-to-Board Application of Latch Style Receptacle H ousing N otes: 1. P lain housings are end-to-end stackable on either straight or right-angle posted, unshrouded A M P M OD U S ystem 50 headers. N otes: 2. For end-to-end stacking, the tw o posts located betw een the adjoining housings m ust be rem oved to provide housing end clearance. N o. of D im ensions Plain H ousing Latch Style H ousing Pos. AB Part N um bers Part N um bers 8 .1 50 [3.8 1] .2 47 [6 .27 ] 48 7 938 -8 48 7 937 -8 10 .2 00 [5.08 ] .2 97 [7 .54] 1-48 7 938 -0 1-48 7 937 -0 12 .2 50 [6 .35] .374 [8 .8 1] 1-48 7 938 -2 1-48 7 937 -2 14 .300 [7 .6 2] .397 [10.08 ] 1-48 7 938 -4 1-48 7 937 -4 16 .350 [.8 8 9] .447 [11.35] 1-48 7 938 -6 1-48 7 937 -6 20 .450 [11.43] .547 [13.8 9] 2-48 7 938 -0 2-48 7 937 -0 24 .550 [13.97 ] .647 [16 .43] 2-48 7 938 -4 2-48 7 937 -4 26 .600 [15.24] .697 [17 .7 ] 2-48 7 938 -6 2-48 7 937 -6 30 .700 [17 .7 8 ] .797 [20.24] 3-48 7 938 -0 3-48 7 937 -0 34 .8 00 [20.32] .8 97 [22.7 8 ] 3-48 7 938 -4 3-48 7 937 -4 40 .950 [24.13] 1 .047 [26 .59] 4-48 7 938 -0 4-48 7 937 -0 44 1 .050 [26 .6 7 ] 1 .1 47 [29.13] 4-48 7 938 -4 4-48 7 937 -4 50 1 .2 00 [30.48 ] 1 .2 97 [39.94] 5-48 7 938 -0 5-48 7 937 -0 6 0 1 .450 [36 .8 3] 1 .547 [39.29] — 6 -48 7 937 -0 7 2 1 .750 [44.45] 1 .8 47 [46 .91] 7 -48 7 938 -2 7 -48 7 937 -2 8 0 1 .950 [49.53] 2 .047 [51.99] 8 -48 7 938 -0 8 -48 7 937 -0 100 2 .450 [6 2.23] 2 .547 [6 4.6 9] 48 7 938 -1 48 7 937 -1 N ote: Other sizes of receptacle housings, up to 120 positions, can be m ade available, consult TE.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System ZIF-Line C onnectors, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, C able-to-B oard ZIF-Line Connectors M aterial and Finish H ousing and C over — B lack therm oplastic, flam e retardant, C ontacts — P hosphor bronze, plated .00 0 1 50 [0 .0 0 381 ] m in. bright tin over .00 0 0 50 [0 .0 0 1 2 7] m in. nickel on entire contact Perform ance C haracteristic C ontact C urrent R ating — 1 am pere† †1 am pere rating is for single circuit. M ultiple circuits, am bient tem perature and conductor size affect current carrying capacity. R elated Product D ata FFC C able (w ith Tin-Plated Prepared E nds) — C onsult T E . Technical D ocum ents — page 64 Product Specification 1 08-1 602 5 Application Specification 1 1 4 -1 60 1 4 Pos. 1 Identification .2 40 [6 .10] .2 40 [6 .10] .040 [1.02] .01 0 [0.25] .1 05 [2.6 7 ] .31 0 [7 .8 7 ] .1 00 [2.54] .050 [1.27 ] .02 0 [0.508 ] .1 55 [3.94] A B .050 Typ [1.27 ] Typ. .1 00 Typ [2.54] Typ. .2 1 0 Typ [5.33] M in. .004-.01 2 [0.102-0.305] Thk. N ote: ZIF-L ine connector illustrated above w ith cover in closed position. .050±.002 * D ia. Typ [1.27 ±0.05] D ia. Typ. .031 ±.003 D ia. Typ [0.7 9±0.08 ] D ia. Typ. .1 00±.002 [2.54±0.05] Pos. 1 Recom m ended M ounting H ole Pattern ±.002 [±0.05] tolerance not to accum ulate w ithin one m ounting hole pattern. This m ounting hole required for even-num bered connector sizes only. FFC C able or Flexible Etched C ircuitry w ith P repared Ends* ZIF-L ine C onnector (C over Open) ZIF-L ine C onnector (Term ination C om pleted w ith C able Inserted and C over C losed) *FFC cable w ith tin-plated prepared ends can be m ade available, consult TE. N ote: S pecial preparation of cable is required, refer to TE A pplication S pecification N o. 114-16 014. Typical F lexible F lat Conductor Cable-to-Board Application Vertical C able E ntry

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System ZIF-Line C onnectors, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, C able-to-B oard (Continued) N ote: A ll part num bers are R oH S com pliant. ZIF-Line C onnectors N o. of D im ensions Connector Pos. AB Part N um bers 5 .470 [11.94] .41 0 [10.41] 5-48 7 57 6 -0 6 .52 0 [13.21] .460 [11.6 8 ] 5-48 7 57 6 -1 7 .570 [14.48 ] .51 0 [12.95] 4-48 7 57 6 -8 8 .62 0 [15.7 5] .560 [14.22] 4-48 7 57 6 -9 9 .670 [17 .02] .61 0 [15.49] 48 7 57 6 -1 10 .72 0 [18 .29] .660 [16 .7 6 ] 48 7 57 6 -2 11 .770 [19.56 ] .71 0 [18 .03] 48 7 57 6 -3 12 .8 2 0 [20.8 3] .760 [19.30] 48 7 57 6 -4 13 .8 70 [22.10] .8 1 0 [20.57 ] 48 7 57 6 -5 14 .92 0 [23.37 ] .8 60 [21.8 4] 48 7 57 6 -6 15 .970 [24.6 4] .91 0 [23.11] 48 7 57 6 -7 16 1 .02 0 [25.91] .960 [24.38 ] 48 7 57 6 -8 17 1 .070 [27 .18 ] 1 .01 0 [25.6 5] 48 7 57 6 -9 18 1 .1 2 0 [28 .45] 1 .060 [26 .92] 1-48 7 57 6 -0 19 1 .1 70 [29.7 2] 1 .1 1 0 [28 .19] 1-48 7 57 6 -1 20 1 .2 2 0 [30.99] 1 .1 60 [29.46 ] 1-48 7 57 6 -2 21 1 .2 70 [32.26 ] 1 .2 1 0 [30.7 3] 1-48 7 57 6 -3 22 1 .32 0 [33.53] 1 .2 60 [32.00] 1-48 7 57 6 -4 23 1 .370 [34.8 0] 1 .31 0 [33.27 ] 1-48 7 57 6 -5 24 1 .42 0 [36 .07 ] 1 .360 [34.54] 1-48 7 57 6 -6 25 1 .470 [37 .34] 1 .41 0 [35.8 1] 1-48 7 57 6 -7 26 1 .52 0 [38 .6 1] 1 .460 [37 .08 ] 1-48 7 57 6 -8 27 1 .570 [39.8 8 ] 1 .51 0 [38 .35] 1-48 7 57 6 -9 28 1 .62 0 [41.15] 1 .560 [39.6 2] 2-48 7 57 6 -0 29 1 .670 [42.42] 1 .61 0 [40.8 9] 2-48 7 57 6 -1 30 1 .72 0 [43.6 9] 1 .660 [42.16 ] 2-48 7 57 6 -2 N o. of D im ensions Connector Pos. AB Part N um bers 31 1 .770 [44.96 ] 1 .71 0 [43.43] 2-48 7 57 6 -3 32 1 .8 2 0 [46 .23] 1 .760 [44.7 0] 2-48 7 57 6 -4 33 1 .8 70 [47 .50] 1 .8 1 0 [45.97 ] 2-48 7 57 6 -5 34 1 .92 0 [48 .7 7 ] 1 .8 60 [47 .24] 2-48 7 57 6 -6 35 1 .970 [50.04] 1 .91 0 [48 .51] 2-48 7 57 6 -7 36 2 .02 0 [51.31] 1 .960 [49.7 8 ] 2-48 7 57 6 -8 37 2 .070 [52.58 ] 2 .01 0 [51.05] 2-48 7 57 6 -9 38 2 .1 2 0 [53.8 5] 2 .060 [52.32] 3-48 7 57 6 -0 39 2 .1 70 [55.12] 2 .1 1 0 [53.59] 3-48 7 57 6 -1 40 2 .2 2 0 [56 .39] 2 .1 60 [54.8 6 ] 3-48 7 57 6 -2 41 2 .2 70 [57 .6 6 ] 2 .2 1 0 [56 .13] 3-48 7 57 6 -3 42 2 .32 0 [58 .93] 2 .2 60 [57 .40] 3-48 7 57 6 -4 43 2 .370 [6 0.20] 2 .31 0 [58 .6 7 ] 3-48 7 57 6 -5 44 2 .42 0 [6 1.47 ] 2 .360 [59.94] 3-48 7 57 6 -6 45 2 .470 [6 2.7 4] 2 .41 0 [6 1.21] 3-48 7 57 6 -7 46 2 .52 0 [6 4.01] 2 .460 [6 2.48 ] 3-48 7 57 6 -8 47 2 .570 [6 5.28 ] 2 .51 0 [6 3.7 5] 3-48 7 57 6 -9 48 2 .62 0 [6 6 .55] 2 .560 [6 5.02] 4-48 7 57 6 -0 49 2 .670 [6 7 .8 2] 2 .61 0 [6 6 .29] 4-48 7 57 6 -1 50 2 .72 0 [6 9.09] 2 .660 [6 7 .56 ] 4-48 7 57 6 -2 51 2 .770 [7 0.36 ] 2 .71 0 [6 8 .8 3] 4-48 7 57 6 -3 52 2 .8 2 0 [7 1.6 3] 2 .760 [7 0.10] 4-48 7 57 6 -4 53 2 .8 70 [7 2.90] 2 .8 1 0 [7 1.37 ] 4-48 7 57 6 -5 54 2 .92 0 [7 4.17 ] 2 .8 60 [7 2.6 4] 4-48 7 57 6 -6 55 2 .970 [7 5.44] 2 .91 0 [7 3.91] 4-48 7 57 6 -7

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System C able-to-B oard C onnectors, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, R ibbon C able, System 50 Cable-to-Board Connectors, Ribbon Cable The A M P-LA TC H System 50 Ribbon C able connector is a receptacle connector that w ill term inate ribbon cable on .0 25 [0 .64] centerlines. It is available in select sizes from 1 0 to 1 0 0 positions and w ill accom m odate 3 0 A W G [0 .0 5 m m 2] solid or stranded and 3 2 A W G [0 .0 3 m m 2] stranded conductors, w ith PVC cable insulation. The housing and cover (black) have a 94V-0 rating. A copper alloy single m ating beam contact provides the interconnect betw een the conductor and the .0 1 5 [0 .3 8] square posts on the .0 50 x .1 0 0 [1 .27 x 2.54] grid. The contacts are plated w ith 3 0 gold duplex plating. The latching feature is located on the receptacle, not the header, and saves board space and elim inates future problem s of “latch height com patibility.” Product Facts I Preassem bled housing and cover I One step term ination I E nd and daisy chain term ination I Positive end latching of connector to shrouded headers I Term inates 30 AW G [0 .0 5 m m 2 ] solid or stranded and 32 AW G [0 .0 3 m m 2 ]* stranded .0 2 5 [0 .64] centerline ribbon cable w ith PVC insulation I 0 .5 am pere current ratin g (lim ite db ycable)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System D ouble R ow R eceptacles, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, C able-to-B oard, R ibbon C able, System 50 N ote: A ll part num bers are R oH S com pliant. R ibbon C able R eceptacles .2 2 8 [5.8 0] .2 46 [6 .25] .58 0 [14.7 3] B efore Term ination .1 98 [5.03] .1 00 [2.54] M aterial and Finish H ousing — B lack therm oplastic, Latches — S tainless steel C ontacts — C opper alloy, plated gold over nickel w ith tin in term ination area R elated Product D ata Perform ance C haracteristics — page 63 M ateable H eaders — pages 2 9, 30, 34 , 35 & 4 4 Application Tooling — page 60-62 M ates w ith Posts — .01 5 [0 .38] square, .1 2 5 [3.1 8] long, on.0 50 x .1 0 0 [1 .2 7 x 2 .54 ] grid Technical D ocum ents — page 64 Product Specification 1 08-1 1 09 Application Specification 1 1 4 -2 50 2 9 .2 54 [6 .45] .2 2 8 [5.7 9] .054 [1.37 ] .430 [10.92] .1 02 [2.59] .335 [8 .51] .1 00 [2.54] .050 [1.27 ] F E D A C over L atch C ontact H ousing Typ. Position #1 Indicator C B N o. of D im ensions Part Pos. AB C D E F N um bers

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Paddleboard R eceptacles, .0 50 x .10 0 [1.2 7 x 2 .54] C enterline, C able-to-B oard, R ibbon C able, System 50 N ote: A ll part num bers are R oH S com pliant. Paddleboard Receptacles M aterial and Finish H ousing — B lack L C P therm oplastic, C over — B lack polyester, 94 V-0 rated C ontacts — C opper alloy, plated .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 4 5-0.00508] bright tin over .0 0 0 0 50 -.0001 00 [0.0 0 1 2 7-0 .0 0 2 54 ] nickel .02 4 [0.6 1] .1 1 8 [3.00] .040 [1.02] .030 [0.7 6 ] S tandoffs (V arious L ocations) B .1 00 [2.54] A .02 0 [0.51] .045 [1.19] R ef. .050 [1.27 ] N o. of PCB H ole D im ensions Part N um bers Pos. Layout AB 10 1 .436 [11.07 ] .2 00 [5.08 ] 5111595-1 14 1 .536 [13.6 1] .300 [7 .6 2] 5111595-2 16 2 .58 6 [14.8 8 ] .350 [8 .8 9] 5111595-3 20 2 .68 6 [17 .42] .450 [11.43] 5111595-4 24 2 .78 6 [19.96 ] .550 [13.97 ] 5111595-5 26 1 .8 36 [21.23] .600 [15.24] 5111595-6 28 2 .8 8 6 [22.50] .650 [16 .51] 2-5111595-0 30 1 .936 [23.7 7 ] .700 [17 .7 8 ] 5111595-7 34 1 1 .036 [26 .31] .8 00 [20.32] 5111595-8 40 2 1 .1 8 6 [30.12] .950 [24.13] 5111595-9 Typ. .050 [1.27 ] T yp. .1 68 [4.27 ] .075 [1.91] Typ. .304 [7 .7 2] .008 [0.20] Typ. .340 [8 .6 4] (U nterm inated) Position 1 Indicator .2 73 [6 .93] (T erm inated) .050 [1.27 ] T yp. .075 [1.91] T yp. .304 [7 .7 2] .031 [0.7 9] T yp. Recom m ended PC Board Layout 2 N o. of PCB H ole D im ensions Part N um bers Pos. Layout AB 44 2 1 .2 8 6 [32.6 6 ] 1 .050 [26 .6 7 ] 1-5111595-0 46 1 1 .336 [33.93] 1 .1 00 [27 .94] 1-5111595-7 50 1 1 .436 [36 .47 ] 1 .2 00 [30.48 ] 1-5111595-1 6 0 2 1 .68 6 [42.8 2] 1 .450 [36 .8 3] 1-5111595-2 6 4 2 1 .78 6 [45.36 ] 1 .550 [39.37 ] 1-5111595-3 6 8 2 1 .8 8 6 [47 .90] 1 .650 [41.91] 1-5111595-9 7 2 2 1 .98 6 [50.44] 1 .750 [44.45] 1-5111595-4 8 0 2 2 .1 8 6 [55.52] 1 .950 [49.53] 1-5111595-5 100 2 2 .68 6 [6 8 .22] 2 .450 [6 2.23] 1-5111595- 6 B R elated Product D ata Perform ance C haracteristics — page 63 Application Tooling — pages 60-62 Technical D ocum ents — page 64 Product Specification 1 08-1 1 09 Application Specification 1 1 4 -2 50 4 0 .050 [1.27 ] T yp. .075 [1.91] T yp. .304 [7 .7 2] .031 [0.7 9] T yp. Recom m ended PC Board Layout 1 B

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Flat R ibbon C able N o. of D im ensions Part N um bers Conductors AB Length Per Reel* 1 00 ft. [30.48 m ] 500 ft. [1 52 .4 m ] 16 .375 [9.52] .400 [10.16 ] 5-57 013-1 5-57 013-2 20 .475 [12.07 ] .500 [12.7 0] 1-57 013-3 57 013-1 24 .575 [14.6 1] .600 [15.24] 1-57 013-4 57 013-8 26 .62 5 [15.8 8 ] .650 [16 .51] 2-57 013-5 2-57 013-6 28 .675 [17 .14] .700 [17 .7 8 ] 4-57 013-6 4-57 013-7 30 .72 5 [18 .42] .750 [19.05] 1-57 013-5 57 013-6 34 .8 2 5 [20.95] .8 50 [21.59] 4-57 013-9 5-57 013-0 36 .8 75 [22.23] .900 [22.8 6 ] 1-57 013-6 57 013-7 40 .975 [24.7 7 ] 1 .000 [25.40] 1-57 013-7 57 013-2 44 1 .075 [27 .31] 1 .1 00 [27 .94] 1-57 013-8 57 013-9 50 1 .2 2 5 [27 .94] 1 .2 50 [31.7 5] 1-57 013-9 1-57 013-0 6 0 1 .475 [37 .47 ] 1 .500 [38 .10] 2-57 013-0 57 013-3 6 8 1 .675 [42.55] 1 .700 [43.18 ] 2-57 013-1 1-57 013-1 7 2 1 .775 [45.09] 1 .8 00 [45.7 2] 2-57 013-2 1-57 013-2 8 0 1 .975 [50.17 ] 2 .000 [50.8 0] 2-57 013-3 57 013-4 100 2 .475 [6 2.8 7 ] 2 .500 [6 3.50] 2-57 013-4 57 013-5 *R eel m ay contain separate lengths, 20 ft. [6 .1 m ] m in. per length. 30 AW G [0 .0 5 m m 2 ], Solid B are C opper Product Specifications Voltage — 1 50 Volts Im pedance — 80 Ohm s Nom inal (G ND ,S IG , G ND , applies to 30A W G S olid B are C opper) C apacitance — 1 9.2 pf/ft at 1 M Hz nom . Propagation D elay — 1 .51 ns/ft nom . C rosstalk — 1 0 ft sam ple 5 ns rise tim e: Near E nd — 4 .0 % m ax. Far E nd — 6.0 % m ax. UL Listing — S T YL E 2 678 R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 53793 C ertified by C anadian Standards Association, (C SA File N o. LL83498) B A .01 2 5 [0.318 ] .02 5 [0.6 35] Typ. 30 A W G [0.05 m m 2] S olid B are C opper R ed Edge M ark for orientation .006 [0.152] M inim um Insulation Thickness Tem perature R ating — - 20°C to +105°C Insulation— G ray Flam e R etardant Flexible P V C Flam m ability— U L : V W 1 .02 5 [0.6 35] Base Im pedance Capacitance Inductance N om inal N EXT F EXT Part N o. Insulation AW G Voltage Single Ended N om inal N om inal Prop. 1 0 F t 1 0 F t G -S-G G -S-G D elay 5ns Rise Tim e 5ns Rise Tim e Flat R ibbon C able, PVC Insulation E lectrical C haracteristics of .0 2 5 [0 .64] C enterline ID C R ibbon C able R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System C enterline ID C R ibbon C able, PVC Insulation N ote: A ll part num bers are R oH S com pliant. Flat Ribbon Cable Part N um bers N o. of D im ensions Length Per Reel Conductors AB 1 00 ft. [30.5 m ] 500 ft. [1 52 .4 m ] 20 .475 [12.07 ] .500 [12.7 0] 1-57 131-3 57 131-1 40 .975 [24.7 7 ] 1 .000 [25.40] 1-57 131-7 57 131-2 50 1 .2 2 5 [31.12] 1 .2 50 [31.7 5] 1-57 131-9 1-57 131-0 6 8 1 .675 [42.55] 1 .700 [43.18 ] 2-57 131-1 1-57 131-1 8 0 1 .975 [50.17 ] 2 .000 [50.8 0] 2-57 131-3 57 131-4 100 2 .475 [6 2.8 7 ] 2 .500 [6 3.50] 2-57 131-4 57 131-5 Edge M ark A 30 A W G 7 /38 S tranded Tinned C opper .0125 [0.318 ] .025 TYP [0.6 35] .006 [0.152] M inim um Insulation Thickness P V C Insulation .027 [0.6 8 6 ] B Product Specifications Voltage R ating — 1 50 Volts Im pedance — 66 ohm s ( G ND , S IG , G ND ) C apacitance — 2 3 pf/ft. at

1 K Hz

Propagation D elay — 1 .55 ns/ft. [5.6 ns/m ] C rosstalk — 1 0 Ft. sam ple 5 ns rise tim e Near E nd — 2 .8% m ax Near E nd — 4 .5% m ax UL AW M S tyle 2 678 C ertified F or use w ith: A M P -L A TC H S ystem 50, A M P L IM ITE .050 S eries and A M P M OD U S ystem 50 C onnectors Com patible w ith: A M P R -C A M R ibbon C able A ssem bly M achine

30 AW G 7/38 Stranded

R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for Flexible Film C ontacts N ote: A ll part num bers are R oH S com pliant. Application Tooling H and C rim ping Tool Assem blies (for repair purposes) The flexible film sem iautom atic bench m achine for term inating centerline flexible flat conductor cable (F F C ), flexible etched circuitry (F E C ), and flexible printed w iring (F PW ) w ith A M P F F C reel-m ounted contacts. F or each cable or circuitry, the contacts are autom atically applied one-at-a-tim e in a straight sequence. To skip positions, an optional program m er control box is available. C rim p height is easily adjustable in .0 0 0 2 [.0 0 51 ] increm ents. Term ination rates up to 20 0 contacts per m inute. Flexible Film Term ination M achine (Term inates C ontinuous Strip C ontacts Sequentially) Specifications W idth — 2 0 .5 [52 0 ] D epth — 2 7.5 [70 0 ] H eight — 1 8 [4 60 ] (w ith reel support) R eel Size — 2 4 [61 0 ] (m ax.) W eight — 1 0 0 lb. [4 5.4 kg] E lectrical Source — 1 2 0 VA C , 50 /60 Hz, 7.0 A ; 2 4 0 VA C , 50 /60 Hz, 3.5 A Technical D ocum ents C ustom er M anuals 4 0 9 -5835 (P art Num bers 2 2 4 91 0 and 31 861 9) 4 0 9 -5880 Program m er Kit (P art Num ber 3564 84 -1 ) For tooling inform ation, contact the Technical S upport C enter: 1 -8 00-52 2 -6752 . M achine Part N um bers D escription M achine M achine W ith Program m er* .100 [2.54] CL , M ulti-C rim p, 120 V 224910-1 318 6 19-1 .100 [2.54] CL , M ulti-C rim p, 240 V 224910-2 318 6 19-2 .100 [2.54] CL , A R IN C , 120 V 224910-3 318 6 19-3 .050 [1.27 ] CL , M ulti-C rim p, 120 V 224910-4 318 6 19-4 .050 [1.27 ] CL , M ulti-C rim p, 240 V 224910-6 318 6 19-6 *The P rogram m er K it ( Part N o. 35648 4-1 ) m ay be purchased w ith a new m achine, or separately for adding onto an existing m achine. Part N o. 90 2 73-5 — for .1 00 CL M ulti-C rim p C ontacts (4 08-9564 ) E xtraction Tools for .10 0 CL C ontacts Tool N o. 912 0 0 - I*— for R eceptacle Housings w ith Side Locking Lance Slot (4 0 8-791 6) Tool N o. 910 47- I*— for R eceptacle and P in Housings w ith E nd Locking Lance Slot (4 0 8-7384 ) *Consult TE for specific dash nos.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for C om pliant Pin C onnectors Application Tooling N ote: A ll part num bers are R oH S com pliant. BM EP M EP AEP 6T AEP 1 2 T S ystem Type B enchtop S tand-A lone S tand-A lone S tand-A lone or S em i-A utom atic P ress S em i-A utom atic P ress A utom atic P ress Inline A utom atic P ress Force C apability U p to 5 Tons U p to 12 Tons U p to 6 Tons U p to 12 Tons [44 kN ] [107 kN ] [53 kN ] [107 kN ] B oard S ize C apability U p to 18 " x 24" U p to 30" x 36 " U p to 30" x 36 " U p to 36 " x 48 " [46 0x6 10 m m ] [7 6 0x915 m m ] [7 6 0x915 m m ] [915x1220 m m ] P lease contact the Tyco Tooling A ssistance C enter at 1-8 00-7 22-1111 for help w ith choosing the correct press and tooling to m eet your application needs. S ee C atalog 1309329 for m ore inform ation on this equipm ent. ASG Servo E lectric Presses for C om pliant Pin C onnectors E very TE A SG servo press utilizes real-tim e force and distance m onitoring and control. This allow s the press to identify an error and react throughout the press stroke. C om m on problem s such as PC B holes above\\below specifi - cation and som etim es bent pins can be detected by m onitoring both m inim um and m axim um force param - eters. C om m on operator error such as im properly placed connectors, m iss - ing\\incorrect connector or tooling can also be found by m onitoring prem ature or m issing force param eters. In each case, the system can stop during the press cycle to avoid costly scrap and rew ork. Product Line Overview TE offers the A SG line of servo electric presses for the application of com pliant pin products. System s are available in a w ide range of pressing forces, board size capabilities and autom ation levels to m eet alm ost any applications requirem ents. E ach system utilizes a servo electric m otor w ith PC con - trol. C oupled w ith force and distance m onitoring and control, the entire line pro - vides 1 0 0 % quality assur - ance in real-tim e w ith SPC data collection capabilities. A utom atic set up and a graphical operator interface help provide intuitive opera - tion to help reduce com m on and costly operator errors. Press Force M onitoring for Scrap Avoidance

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for R ibbon C able C onnectors N ote: A ll part num bers are R oH S com pliant. Application Tooling M anual Arbor Tool Part N o. 910 85-2 Pneum atic Auto-C ycle Tool Part N o. 91112 -3 These application tools are designed for one-step term ination of ribbon cable connectors to planar, ground plane and shielded/jacketed ribbon cable on .0 25 [0 .64] centers. A com plete set of tooling consists of an A rbor Tool (m anual, Part N o. 91 0 85-2 or pneum atic, Part N o. 91 1 1 2-3 ), a B ase A ssem bly, Part N o. 7683 3 8-4 and a C onnector Specific Kit, Part N o. 6791 67-1 (receptacle). Technical D ocum ents Instruction Sheets 4 0 8-7777 — M anual A rbor Fram e A ssem bly 4 0 8-6732 — P neum atic A uto-C ycle A ssem bly 4 0 8-9 82 7 — Universal B ase A ssem bly, A rbor Tool 4 0 8-9 872 — C onnector S pecific K it for R eceptacle C onnectors (.02 5 [0.64 ] C enterline C able) 4 0 8-9 9 2 8 — C onnector S pecific K it for P addleboard C onnectors (.02 5 [0.64 ] C enterline C able) N ote: Tooling is available for other m anufacturers’ m anual arbor tools. For inform ation contact the TE Technical S upport C enter: 1-8 00-522-6 7 52

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Perform ance Specifications Performance Characteristics Perform ance Specifications Board-to-Board, Board-to-Board, Cable-to-Board, D escription Thru-H ole Surface-M ount, Cable-to-Board, .02 5 [0.64] Centerline H eaders and H eaders and .050 [1 .2 7] Centerline Ribbon Cable Receptacles Receptacles F F C Cable Receptacles Receptacles S ize R ange-S ingle R ow 4 thru 50 — 4 thru 50 — D ouble R ow 10 thru 100 10 thru 100 8 thru 100 10 thru 100 C urrent R ating (per contact) 1.0 am peres 1.0 am peres 1.5 am peres 0.5 am peres D ielectric W ithstanding V oltage 500 V A C 500 V A C 300 V A C 200 V A C Insulation R esistance 5,000 M egohm s 5,000 M egohm s 5,000 M egohm s 5,000 M egohm s D urability (tested to) 200 C ycles 200 C ycles 200 C ycles 150 C ycles Operating Tem perature -6 5°C to +105°C -6 5°C to +105°C -55°C to +105°C -6 5°C to +105°C *W ith latches depressed. N eed m ore inform ation? C all the Technical Support C enter: 1 -8 00-52 2 -6752 . The Technical Support C enter is staffed w ith specialists w ell versed in all TE products. The C enter can provide you w ith: I Technical Support I C atalogs I Technical D ocum ents I Product Sam ples I TE A uthorized D istributor Locations B oard-to-B oard Spacing for Thru-H ole and Surface-M ount C onnector C om binations Thru-H ole R eceptacle– Thru-H ole H eader (S ingle and D ouble R ow, S hrouded and Unshrouded) Thru-H ole R eceptacle– Surface-M ount H eader (D ouble R ow, S hrouded) Surface-M ount R eceptacle– Thru-H ole H eader (D ouble R ow, S hrouded and Unshrouded) Surface-M ount R eceptacle– Surface-M ount H eader (D ouble R ow, S hrouded)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Technical D ocum ents N ote: A ll part num bers are R oH S com pliant. Technical D ocum ents The follow ing is a list of technical docum ents covering the application, perform ance and m aintenance of A M PM O D U System 50 connectors. Product Specifications describe technical perform ance characteristics and verification tests. They are intended for the D esign, C om ponent and Q uality E ngineer. 1 0 8-1 0 93 — A M PM O D U System 50 Interconnection System , B oard-to-B oard 1 0 8-1 1 0 9— A M PLA TC H System 50 Receptacle and Paddleboard C onnector 1 0 8-1 60 22— C onnector System , .0 50 [1 .27] C enterline F F C C able 1 0 8-1 60 25— C onnector, ZIF -Line 50 1 0 8-1 60 29— Shielded F lexible F lat C onductor C able 1 0 8-40 0 0 2— F lexible F lat C onductor C able Application Specifications describe requirem ents for using the product in its intended appli - cation and/or crim ping inform ation. They are intended for the Packaging and D esign E ngineer and the M achine Setup Person. 1 1 4-1 60 0 8— M ultiple C rim p C ontact for .0 50 [1 .27] C enterline F F C and F E C C able 1 1 4-1 60 1 4— A M P ZIF -Line 50 & 1 0 0 PC B C onnectors 1 1 4-250 29— A M PM O D U System 50 Ribbon C able C onnectors 1 1 4-250 3 1 — A M PM O D U System 50 Thru-Hole C onnectors 1 1 4-250 3 5— A M PM O D U Surface-M ount C onnectors 1 1 4-250 40 — A M PM O D U System 50 Paddleboard C onnectors Instruction Sheets provide instructions for assem bling or applying the product. They are intended for the M anufacturing A ssem bler or O perator. 40 8-673 2— Pneum atic A rbor Tool, Part N um ber 91 1 1 2-3 (A uto-C ycle) 40 8-73 84— E xtraction Tool, Part N um ber 91 0 47 40 8-7763 — Pneum atic A rbor Tool, Part N um ber 91 1 1 2-2 40 8-7777— M anual A rbor Tool, Part N um ber 91 0 85-2 40 8-791 6— E xtraction Tool, Part N um ber 91 20 0 40 8-9827— U niversal B ase A ssem bly, A rbor Tool, Part N um ber 7683 3 8-1 40 8-9872— C onnector Specific Kit, Part N um ber 6791 67-1 , A M PM O D U System 50 Receptacle C onnectors (.0 25 [0 .64] C enterline C able) 40 8-9928— C onnector Specific Kit, Part N um ber 6791 76-1 , A M PM O D U System 50 Paddleboard C onnectors (.0 25 [0 .64] C enterline C able) 40 8-9564— Hand C rim ping Tool A ssem bly, Part N um ber 90 273 -5 40 8-971 9— F F C C ontact Positioning Hand Tool Kit, Part N um ber 91 292-1

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches AM PM OD U 2 m m C onnectors (B oard to B oard) AMPMODU 2mm Connectors (Board-to-Board) A M PM O D U 2m m connectors reliably and econom ically m eet the packaging and inter-connection requirem ents of today’s m iniature sophisticated electronics. They are ideal for m obile and portable personal com puters and disk drive applications. In today’s m arketplace, 2m m is expanding over m any other industry segm ents due to space constraints. This versatile double- row connector system is com prised of various straight and right-angle posted headers for thru-hole and surface m ounting and several closed top-entry receptacle assem blies for vertical and horizontal m ounting. Headers and receptacle assem blies are available in selected sizes ranging from 4 through 80 positions. Thru-hole breakaw ay headers feature brass straight or right-angle posts w ith a post length of 4.0 [.1 6] and a lead length of 2.6 [.1 0 ]. The receptacle assem blies em ploy phosphor bronze contacts w ith dual canti- lever beam s and built-in anti-overstress. This feature, coupled w ith duplex (gold/tin-lead) plating of the header posts and receptacle contacts, provide superior electrical perform ance as w ell as excellent solderability. Product Facts I 2 .0 x 2 .0 [.0 8 x .0 8] centerline spacing I Tw o-piece, double-row connector system I Unshrouded header styles include; breakaw ay and surface-m ount I All headers w ith 0 .5 [.0 2 ] square posted contacts I Surface-m ount connectors com patible w ith standard surface-m ount processing (VPR , IR ) I C losed top-entry receptacle assem blies include; vertical m ount and right-angle I R eceptacle contacts em ploy dual cantilever beam s for tw o-point electrical stability I D uplex (gold/tin-lead) plated posted contacts and receptacle contacts I Therm oplastic housing m aterial, UL 94V-0 rated I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 I Produced under a Q uality M anagem ent System certified to ISO 90 0 1 A copy of the certificate is available upon request. R R ISO Certified9001

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches 2 m m H eaders, Unshrouded, D ouble R ow , Thru-H ole, Vertical M ount B reakaw ay H eaders, Unshrouded, D ouble R ow , Thru-H ole M ount 0 .5 [.0 2 ] Square Straight Posts M aterial and Finish H ousing — B lack therm oplastic, UL 94 V-O R ated Posted C ontacts — C opper alloy, duplex plated as follow s: 0.0 0 0 2 0 [.0 0 0 0 0 8] m in. gold on contact area, 0 .0 0 2 54 [.0 0 0 1 0 0 ] m in. tin on solder area, w ith entire contact underplated 0 .0 0 1 2 7 [.0 0 0050] m in. nickel R elated Product D ata M ateable R eceptacles — pages 80 -84 Product Specification 1 08-571 97 Packaging M ethod — L oose piece, bag D im ensions Part N um bers Position A B Reflow 2 40°C 2 65°C 4 4.0 [.16 ] 2 .0 [.08 ] 147 0213-4 17 34508 -4 6 6.0 [.24] 4.0 [.16 ] 147 0213-6 17 34508 -6 8 8 .0 [.32] 6.0 [.24] 147 0213-8 17 34508 -8 10 1 0.0 [.39] 8 .0 [.32] 1-147 0213-0 1-17 34508 -0 12 1 2 .0 [.47 ] 1 0.0 [.39] 1-147 0213-2 1-17 34508 -2 14 1 4.0 [.55] 1 2 .0 [.47 ] 1-147 0213-4 1-17 34508 -4 16 1 6.0 [.6 3] 1 4.0 [.55] 1-147 0213-6 1-17 34508 -6 18 1 8 .0 [.7 1] 1 6.0 [.6 3] 1-147 0213-8 1-17 34508 -8 20 2 0.0 [.7 9] 1 8 .0 [.7 1] 2-147 0213-0 2-17 34508 -0 22 2 2 .0 [.8 7 ] 2 0.0 [.7 9] 2-147 0213-2 2-17 34508 -2 24 2 4.0 [.94] 2 2 .0 [.8 7 ] 2-147 0213-4 2-17 34508 -4 26 2 6.0 [1.02] 2 4.0 [.94] 2-147 0213-6 2-17 34508 -6 28 2 8 .0 [1.10] 2 6.0 [1.02] 2-147 0213-8 2-17 34508 -8 30 30.0 [1.18 ] 2 8 .0 [1.10] 3-147 0213-0 3-17 34508 -0 32 32 .0 [1.26 ] 30.0 [1.18 ] 3-147 0213-2 3-17 34508 -2 34 34.0 [1.34] 32 .0 [1.26 ] 3-147 0213-4 3-17 34508 -4 36 36.0 [1.42] 34.0 [1.34] 3-147 0213-6 3-17 34508 -6 38 38 .0 [1.50] 36.0 [1.42] 3-147 0213-8 3-17 34508 -8 40 40.0 [1.57 ] 38 .0 [1.50] 4-147 0213-0 4-17 34508 -0 42 42 .0 [1.6 5] 40.0 [1.57 ] 4-147 0213-2 4-17 34508 -2 44 44.0 [1.7 3] 42 .0 [1.6 5] 4-147 0213-4 4-17 34508 -4 46 46.0 [1.8 1] 44.0 [1.7 3] 4-147 0213-6 4-17 34508 -6 48 48 .0 [1.8 9] 46.0 [1.8 1] 4-147 0213-8 4-17 34508 -8 50 50.0 [1.97 ] 48 .0 [1.8 9] 5-147 0213-0 5-17 34508 -0 52 52 .0 [2.05] 50.0 [1.97 ] 5-147 0213-2 5-17 34508 -2 54 54.0 [2.13] 52 .0 [2.05] 5-147 0213-4 5-17 34508 -4 56 56.0 [2.20] 54.0 [2.13] 5-147 0213-6 5-17 34508 -6 58 58 .0 [2.28 ] 56.0 [2.20] 5-147 0213-8 5-17 34508 -8 6 0 60.0 [2.36 ] 58 .0 [2.28 ] 6 -147 0213-0 6 -17 34508 -0 6 2 62 .0 [2.44] 60.0 [2.36 ] 6 -147 0213-2 6 -17 34508 -2 6 4 64.0 [2.52] 62 .0 [2.44] 6 -147 0213-4 6 -17 34508 -4 6 6 66.0 [2.6 0] 64.0 [2.52] 6 -147 0213-6 6 -17 34508 -6 6 8 68 .0 [2.6 8 ] 66.0 [2.6 0] 6 -147 0213-8 6 -17 34508 -8 7 0 70.0 [2.7 6 ] 68 .0 [2.6 8 ] 7 -147 0213-0 7 -17 34508 -0 7 2 72 .0 [2.8 3] 70.0 [2.7 6 ] 7 -147 0213-2 7 -17 34508 -2 7 4 74.0 [2.91] 72 .0 [2.8 3] 7 -147 0213-4 7 -17 34508 -4 7 6 76.0 [2.99] 74.0 [2.91] 7 -147 0213-6 7 -17 34508 -6 7 8 78 .0 [3.07 ] 76.0 [2.99] 7 -147 0213-8 7 -17 34508 -8 8 0 8 0.0 [3.15] 78 .0 [3.07 ] 8 -147 0213-0 8 -17 34508 -0 A ±0.50 [±0.02] B ±0.1 0 [±.004] 0.50±0.02 [.02±.001] D IA TYP 4.00±0.1 5 [.157 ±.006 ] 4.00±0.1 5 [.157 ±.006 ] 2 .00±0.1 5 [.07 9±.006 ] 2 .00±0.1 5 [.07 9±.006 ] 2 .60±0.02 [.102±.001] 1 .50±0.1 5 [.059±.006 ] B 2 .00±0.1 5 [.07 9] TYP 0.8 0 [.031] D IA TYP Recom m ended Solder Pad Layout N ote: A ll part num bers are R oH S com pliant.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches 2 m m H eaders, Unshrouded, D ouble R ow , Thru-H ole, R ight-Angle M ount AMPMODU .025 Square Interconnection System 0 .5 [.0 2 ] Square Straight Posts M aterial and Finish H ousing — B lack therm oplastic, UL 94 V-O Rated, 2 65°C Process C apable Posted C ontacts — C opper alloy, duplex plated as follow s: 0.0 0 0 2 0 [.0 0 0 0 0 8] m in. gold on contact area, 0 .0 0 2 54 [.0 0 0 1 0 0 ] m in. tin on solder area, w ith entire contact underplated 0 .0 0 1 2 7 [.0 0 0050] m in. nickel R elated Product D ata M ateable R eceptacles — pages 80 -84 Product Specification 1 08-571 97 Packaging M ethod — L oose piece, bag Position D im ensions Part N um bers A B 4 4.0 [0.16 ] 2 .0 [0.08 ] 17 34507 -4 6 6.0 [0.24] 4.0 [0.16 ] 17 34507 -6 8 8 .0 [0.31] 6.0 [0.24] 17 34507 -8 10 1 0.0 [0.39] 8 .0 [0.31] 1-17 34507 -0 12 1 2 .0 [0.47 ] 1 0.0 [0.39] 1-17 34507 -2 14 1 4.0 [0.55] 1 2 .0 [0.47 ] 1-17 34507 -4 16 1 6.0 [0.6 3] 1 4.0 [0.55] 1-17 34507 -6 18 1 8 .0 [0.7 1] 1 6.0 [0.6 3] 1-17 34507 -8 20 2 0.0 [0.7 9] 1 8 .0 [0.7 1] 2-17 34507 -0 22 2 2 .0 [0.8 7 ] 2 0.0 [0.7 9] 2-17 34507 -2 24 2 4.0 [0.94] 2 2 .0 [0.8 7 ] 2-17 34507 -4 26 2 6.0 [1.02] 2 4.0 [0.94] 2-17 34507 -6 28 2 8 .0 [1.10] 2 6.0 [1.02] 2-17 34507 -8 30 30.0 [1.18 ] 2 8 .0 [1.10] 3-17 34507 -0 32 32 .0 [1.26 ] 30.0 [1.18 ] 3-17 34507 -2 34 34.0 [1.34] 32 .0 [1.26 ] 3-17 34507 -4 36 36.0 [1.42] 34.0 [1.34] 3-17 34507 -6 38 38 .0 [1.50] 36.0 [1.42] 3-17 34507 -8 40 40.0 [1.57 ] 38 .0 [1.50] 4-17 34507 -0 42 42 .0 [1.6 5] 40.0 [1.57 ] 4-17 34507 -2 44 44.0 [1.7 3] 42 .0 [1.6 5] 4-17 34507 -4 46 46.0 [1.8 1] 44.0 [1.7 3] 4-17 34507 -6 48 48 .0 [1.8 9] 46.0 [1.8 1] 4-17 34507 -8 50 50.0 [1.97 ] 48 .0 [1.8 9] 5-17 34507 -0 52 52 .0 [2.05] 50.0 [1.97 ] 5-17 34507 -2 54 54.0 [2.13] 52 .0 [2.05] 5-17 34507 -4 56 56.0 [2.20] 54.0 [2.13] 5-17 34507 -6 58 58 .0 [2.28 ] 56.0 [2.20] 5-17 34507 -8 6 0 60.0 [2.36 ] 58 .0 [2.28 ] 6 -17 34507 -0 6 2 62 .0 [2.44] 60.0 [2.36 ] 6 -17 34507 -2 6 4 64.0 [2.52] 62 .0 [2.44] 6 -17 34507 -4 6 6 66.0 [2.6 0] 64.0 [2.52] 6 -17 34507 -6 6 8 68 .0 [2.6 8 ] 66.0 [2.6 0] 6 -17 34507 -8 7 0 70.0 [2.7 6 ] 68 .0 [2.6 8 ] 7 -17 34507 -0 7 2 72 .0 [2.8 3] 70.0 [2.7 6 ] 7 -17 34507 -2 7 4 74.0 [2.91] 72 .0 [2.8 3] 7 -17 34507 -4 7 6 76.0 [2.99] 74.0 [2.91] 7 -17 34507 -6 7 8 78 .0 [3.07 ] 76.0 [2.99] 7 -17 34507 -8 8 0 8 0.0 [3.15] 78 .0 [3.07 ] 8 -17 34507 -0 A ±0.50 [±0.02] B ±0.1 0 [±.004] 4.00±0.1 5 [.157 ±.006 ] 0.50±0.02 [.02±.001] D IA TYP 4.00±0.2 0 [.157 ±.008 ] 2 .00±0.1 5 [.07 9±.006 ] TYP 2 .00 [.07 9] TYP 2 .00±0.1 5 [.07 9±.006 ] 2 .00±0.2 0 [.07 9±.008 ] B 0.8 0 [.031] D IA TYP 1 .50±0.1 5 [.059±.006 ] 1 .75±0.1 5 [.06 9±.006 ] 2 .60±0.02 [.102±.001] Recom m ended Solder Pad Layout N ote: A ll part num bers are R oH S com pliant.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches 2 m m B reakaw ay H eaders, Unshrouded, D ouble R ow , Thru-H ole, R ight-Angle M ount B reakaw ay H eaders, Unshrouded, D ouble R ow , Thru-H ole M ount 0 .5 [.0 2 ] Square R ight-Angle Posts M aterial and Finish H ousing — B lack therm oplastic, UL 94 V-0 rated Posted C ontacts — B rass, duplex plated as follow s: A — 0 .0 0 0 2 0 [.0 0 0 0 0 8] m in. gold on contact area, 0 .0 0 1 0 0 [.000039] m in. tin on solder area, w ith entire contact underplated 0 .0 0 1 30 [.0 0 0051 ] m in. nickel B — 0 .0 0 0 76 [.0 0 0 0 30 ] m in. gold on contact area, 0 .0 0 1 0 0 [.000039] m in. tin on solder area, w ith entire contact underplated 0 .0 0 1 30 [.0 0 0051 ] m in. nickel R elated Product D ata M ateable R eceptacles — pages 80 -84 Product Specification 1 08-52 96 Packaging M ethod — L oose piece, bag AMP/2247 AMPMODU 2mm Illustration B MPD • 6/10/94 0.5 [.02] DIA TYP 0.5 [.02] TYP L Tin-Lead Plated Area 2.0±0.08* [.08±.003] Typ. Recommended PC Board Hole Layout * Hole centerline to be 2.0±0.08 [.08±.003]; tolerances not to accumulate within one connector pattern. TYP TYP TYP TYP DIA TYP DIA TYP DIA TYP N o. D im ensions Contact Plating of Lead Length L = 2 .6[.1 0]** Positions AB AB 4 4.0 [0.16 ] 2 .0 [0.08 ] 517 6 8 37 -1 2-517 6 8 37 -5 6 6.0 [0.24] 4.0 [0.16 ] 517 6 8 37 -2 2-517 6 8 37 -6 8 8 .0 [0.31] 6.0 [0.24] 517 6 8 37 -3 — 10 1 0.0 [0.39] 8 .0 [0.31] 517 6 8 37 -4 — 12 1 2 .0 [0.47 ] 1 0.0 [0.39] 517 6 8 37 -5 — 14 1 4.0 [0.55] 1 2 .0 [0.47 ] 517 6 8 37 -6 3-517 6 8 37 -0 16 1 6.0 [0.6 3] 1 4.0 [0.55] 517 6 8 37 -7 — 18 1 8 .0 [0.7 1] 1 6.0 [0.6 3] — 3-517 6 8 37 -2 20 2 0.0 [0.7 9] 1 8 .0 [0.7 1] — 3-517 6 8 37 -3 22 2 2 .0 [0.8 7 ] 2 0.0 [0.7 9] — 3-517 6 8 37 -4 26 2 6.0 [1.02] 2 4.0 [0.94] 1-517 6 8 37 -2 — 30 30.0 [1.18 ] 2 8 .0 [1.10] 1-517 6 8 37 -4 — 32 32 .0 [1.26 ] 30.0 [1.18 ] 1-517 6 8 37 -5 3-517 6 8 37 -9 34 34.0 [1.34] 32 .0 [1.26 ] — 4-517 6 8 37 -0 36 36.0 [1.42] 34.0 [1.34] — 4-517 6 8 37 -1 38 38 .0 [1.50] 36.0 [1.42] 1-517 6 8 37 -8 4-517 6 8 37 -2 40 40.0 [1.57 ] 38 .0 [1.50] 1-517 6 8 37 -9 5-517 6 8 37 -2 42 42 .0 [1.6 5] 40.0 [1.57 ] 2-517 6 8 37 -0 4-517 6 8 37 -4 44 44.0 [1.7 3] 42 .0 [1.6 5] 2-517 6 8 37 -1 — 46 46.0 [1.8 1] 44.0 [1.7 3] 2-517 6 8 37 -2 4-517 6 8 37 -6 48 48 .0 [1.8 9] 46.0 [1.8 1] 2-517 6 8 37 -3 4-517 6 8 37 -7 50 50.0 [1.97 ] 48 .0 [1.8 9] 2-517 6 8 37 -4 4-517 6 8 37 -8

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches 2 m m B reakaw ay H eaders, Unshrouded, D ouble R ow , Thru-H ole, Vertical M ount Breakaway Headers, Unshrouded, Double Row, Thru-Hole Mount 0 .5 [.0 2 ] Square Straight Posts M aterial and Finish H ousing — B lack therm oplastic, UL 94 V-0 rated Posted C ontacts — B rass, duplex plated as follow s: Plating A — 0 .0 0 0 2 0 [.000008] m in. gold on contact area, 0 .001 00 [.000039] m in. tin on solder area, w ith entire contact underplated 0 .0 01 30 [.000051 ] m in. nickel Plating B — 0 .0 0 0 76 [.000030] m in. gold on contact area, 0 .001 00 [.000039] m in. tin on solder area, w ith entire contact underplated 0 .0 01 30 [.000051 ] m in. nickel R elated Product D ata M ateable R eceptacles — pages 80 -84 Product Specification 1 08-52 96 Packaging M ethod — L oose piece, bag AMP/2247 AMPMODU 2mm Illustration A MPD • 6/10/94 Dia. Typ. L Tin Plated Area 2.0 ± 0.08* [.08 ± .003 ] Typ. 0.5 [.02] Typ.0.5 [.02] Recommended PC Board Hole Layout * Hole centerline to be 2.0±0.08 [.08±.003]; tolerances not to accumulate within one connector pattern. 4.0 [.16] Dia. Typ.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches N ote: A ll part num bers are R oH S com pliant. 2 m m B reakaw ay H eaders, Unshrouded, D ouble R ow , Thru-H ole, Vertical M ount (Continued) B reakaw ay H eaders, Unshrouded, D ouble R ow , Thru-H ole M ount 0 .5 [.0 2 ] Square Straight Posts N o. D im ensions Contact Plating of A B Lead Length L = 1 .5 [.06] Lead Length L = 2 .6 [.1 0] Positions Plating A Plating B Plating A Plating B 4 4.0 [0.16 ] 2 .0 [0.08 ] 517 8 7 51-1 2-517 8 7 51-5 517 6 26 4-1 1-517 6 26 4-6 6 6.0 [0.24] 4.0 [0.16 ] — 2-517 8 7 51-6 517 6 26 4-2 1-517 6 26 4-7 8 8 .0 [0.31] 6.0 [0.24] — 2-517 8 7 51-7 517 6 26 4-3 1-517 6 26 4-8 10 1 0.0 [0.39] 8 .0 [0.31] 517 8 7 51-4 2-517 8 7 51-8 517 6 26 4-4 1-517 6 26 4-9 12 1 2 .0 [0.47 ] 1 0.0 [0.39] — 2-517 8 7 51-9 517 6 26 4-5 2-517 6 26 4-0 14 1 4.0 [0.55] 1 2 .0 [0.47 ] 517 8 7 51-6 3-517 8 7 51-0 517 6 26 4-6 2-517 6 26 4-1 16 1 6.0 [0.6 3] 1 4.0 [0.55] — 3-517 8 7 51-1 517 6 26 4-7 2-517 6 26 4-2 18 1 8 .0 [0.7 1] 1 6.0 [0.6 3] 517 8 7 51-8 3-517 8 7 51-2 517 6 26 4-8 2-517 6 26 4-3 20 2 0.0 [0.7 9] 1 8 .0 [0.7 1] 517 8 7 51-9 3-517 8 7 51-3 517 6 26 4-9 2-517 6 26 4-4 22 2 2 .0 [0.8 7 ] 2 0.0 [0.7 9] 1-517 8 7 51-0 3-517 8 7 51-4 1-517 6 26 4-0 2-517 6 26 4-5 24 2 4.0 [0.94] 2 2 .0 [0.8 7 ] 1-517 8 7 51-1 3-517 8 7 51-5 1-517 6 26 4-1 2-517 6 26 4-6 26 2 6.0 [1.02] 2 4.0 [0.94] 1-517 8 7 51-2 3-517 8 7 51-6 — — 28 2 8 .0 [1.10] 2 6.0 [1.02] — 3-517 8 7 51-7 1-517 6 26 4-3 — 30 30.0 [1.18 ] 2 8 .0 [1.10] 1-517 8 7 51-4 3-517 8 7 51-8 1-517 6 26 4-4 2-517 6 26 4-9 32 32 .0 [1.26 ] 30.0 [1.18 ] 1-517 8 7 51-5 3-517 8 7 51-9 1-517 6 26 4-5 — 34 34.0 [1.34] 32 .0 [1.26 ] 1-517 8 7 51-6 4-517 8 7 51-0 — 4-517 6 26 4-0 36 36.0 [1.42] 34.0 [1.34] 1-517 8 7 51-7 4-517 8 7 51-1 3-517 6 26 4-2 4-517 6 26 4-1 38 38 .0 [1.50] 36.0 [1.42] 1-517 8 7 51-8 4-517 8 7 51-2 3-517 6 26 4-3 — 40 40.0 [1.57 ] 38 .0 [1.50] 1-517 8 7 51-9 4-517 8 7 51-3 3-517 6 26 4-4 — 42 42 .0 [1.6 5] 40.0 [1.57 ] 2-517 8 7 51-0 4-517 8 7 51-4 —— 44 44.0 [1.7 3] 42 .0 [1.6 5] 2-517 8 7 51-1 4-517 8 7 51-5 3-517 6 26 4-6 4-517 6 26 4-5 46 46.0 [1.8 1] 44.0 [1.7 3] 2-517 8 7 51-2 4-517 8 7 51-6 — 4-517 6 26 4-6 48 48 .0 [1.8 9] 46.0 [1.8 1] 2-517 8 7 51-3 4-517 8 7 51-7 — 4-517 6 26 4-7 50 50.0 [1.97 ] 48 .0 [1.8 9] 2-517 8 7 51-4 4-517 8 7 51-8 3-517 6 26 4-9 4-517 6 26 4-8

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches Header Assembly, AMPMODU 2mm SMT Vertical 2 m m B reakaw ay H eaders, Unshrouded, D ouble R ow , Surface M ount, Vertical M ount N ote: A ll part num bers are R oH S com pliant. 0 .5 [.0 2 ] Square Straight Posts M aterial and Finish H ousing — B lack polyphenylene sulfide, UL 94 V-0 rated Posted C ontacts — P hosphor bronze, plated as follow s, D uplex plated 0.0002 0 [.0 0 0 0 0 8] m in. gold on contact area, 0.0 0 2 0 0 [.0 0 0 0 79] m in. tin on solder area, w ith entire contact underplated 0.0 0 1 30 [.0 0 0 0 51 ] m in. nickel R elated Product D ata M ateable R eceptacles — pages 80 -84 Product Specification 1 08-51 001 Packaging M ethod — Tape & R eel N o. of D im ensions Part Positions ABC N um bers A 0.50±0.03 [.02±.002] TYP B 1 .00 [.04] 0.00 1 .00 [.04] 4.2 0 [.17 ] ±0.05 [.003] -0.00 2 .00 [.08 ] TYP 0.50±0.02 [.02±.001] TYP 0.50±0.02 [.02±.001] TYP 1 .40 M AX [.06 ] TYP C 4.2 0±0.05 [.17 ±.003] 0.50±0.02 [.02±.001] TYP D ±0.2 5 [.01] RO .50 REF Tin-Lead Plating Area Vacuum Cap 1 .50 [.06 ] 1 .00 [.04] 2 .00 [.08 ] 7.00±0.02 [.28 ±.001] 1 .00±0.08 [.04±.003] TYP 1 .50 [.06 ] TYP 2 .60 [.10] TYP 2 .00 [.08 ] TYP Recom m ended Solder Pad Layout 0.1 0 [.004] B±0.08 [.003] Tolerances N on-C um ulative

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 M ETRIC Dim ensions are m illim eters over inches 2 m m B reakaw ay H eaders, Unshrouded, D ouble R ow , Surface M ount, Vertical M ount (Continued) N ote: A ll part num bers are R oH S com pliant. AM PM OD U .0 2 5 Square Interconnection System 0 .5 [.0 2 ] Square Straight Posts M aterial and Finish H ousing — B lack polyphenylene sulfide, UL 94 V-0 rated Posted C ontacts — P hosphor bronze, plated as follow s, D uplex plated 0.0076 [.0 0 0 0 30 ] m in. gold on contact area, 0.0 0 2 54 -0 .0 0 4 0 6 [.0 0 0 1 00-.0001 60] m in. tin on solder area, w ith entire contact underplated 0 .0 01 2 7 [.000050] m in. nickel R elated Product D ata M ateable R eceptacles — pages 80 -84 Product Specification 1 08-1 854 4 Packaging M ethod — Tape & R eel N o. of D im ensions Part Positions ABC N um bers A 6.5±0.2 5 [.256 ±.010] B 3.8 [.150] 2 .00 [.07 9] TYP 3.45 [.136 ] 0.9 [.035] 4.5 [.17 7 ] 0.50 [.02] TYP 1 .00±0.08 [.04±.003] TYP 0.50 [.020] TYP 3.75 [.148 ] TYP 2 .00 [.08 ] TYP Recom m ended Solder Pad Layout B±0.08 [.003] Tolerances N on-C um ulative C AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches 2 m m Stacking H eader, Unshrouded, D ouble R ow , Thru-H ole, Vertical M ount N ote: A ll part num bers are R oH S com pliant.

2.0 Pitch Vertical

0 .5 [.0 2 ] Square Straight Posts

12 Position

H ousing — B lack therm oplastic, UL 94 V-O R ated Posted C ontacts — C opper alloy, duplex plated as follow s: G old flash all over contact underplated 0.0 0 1 2 7 [.0 0 0 0 50 ] m in. nickel R elated Product D ata M ateable R eceptacles — pages 80 -84 Product Specification 1 08-57331 Packaging M ethod — L oose piece, bag 1 2 .0 [.047 ] 1 0.0 [.039] 1 0.0 [.394] 9.75 [.38 4] 0.5±0.03 [0.02±.001] 0.8 ±0.05 [0.31±.002] D IA

12 P laces

2 .0 [.07 9] TYP 2 .0 [.07 9] TYP 2 .0 [.07 9] 2 .0 [.07 9] TYP 2 .0 [.07 9] 4.0 [.157 ] 2 .54 [.100] 2 .54 [.100]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches N ote: A ll part num bers are R oH S com pliant. 2 .0 Pitch R ight-Angle 0 .5 [.0 2 ] Square R ight-Angle Posts 2 6 Position Part N um ber 50 84780 -1 M aterial and Finish H ousing — High tem perature, black therm oplastic, UL 94 V-O R ated Posted C ontacts — C opper alloy, duplex plated as follow s: 0.0 0 0 38 [.0 0 0 0 1 5] m in. gold on contact area, 0 .0 0 2 54 [.0 0 0 1 0 0 ] m in. tin on solder area, w ith entire contact underplated 0 .0 0 1 2 7 [.0 0 0050] m in. nickel R elated Product D ata M ateable R eceptacles — pages 80 and 84 Product Specification 1 08-52 96 Packaging M ethod — Tube 4.1 0 [.16 1] 6.30 [.248 ] 2 .00 [.07 9] 2 .00 [.07 9] 0.75 [.03] 2 .54 [.100] 2 .00 [.07 9] 2 .32 5 [.092] 2 P laces 2 .00 2 4.00 12 S paces x [.07 9] = [.945] 1 .40 [.055] +0.01 -0.05 +.000 -.002 2 .99 [.118 ] +0.51 -0.2 5 +.02 -.01 S oldertail 2 7.1 5 [1.06 9] +0.1 0 -0.05 +.004 -.002 6.65 [.26 2] 3.60 [.142] 2 8 .65 [1.128 ] 0.50±0.03 [0.02±.001] 0.50±0.03 [0.02±.001] 6.40±0.2 0 [.252±.008 ] 2 .00±0.05 [.07 9±.002] TYP

0.50 TYP at

[.07 9] Post Tips [.07 9] Post Tips TYP at Post Tips 2 .00±0.05 [.07 9±.002] TYP 0.90±0.05 [.035±.002] TYP 3.60 [.142] TYP Tolerance N on-C um ulative 0.75 [.03] R ef. 0.50 [.02] R ef. Recom m ended PCB Layout 2 m m H eaders, Shrouded, D ouble R ow , Thru-H ole, R ight-Angle M ount

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches N ote: A ll part num bers are R oH S com pliant.

2.0 Pitch Right-Angle

0 .5 [.0 2 ] Square R ight-Angle Posts M aterial and Finish H ousing — Natural color therm oplastic, UL 94 V-O R ated Posted C ontacts — B rass, plated as follow s: 0.0 0 0 2 0 [.0 0 0 0 0 8] m in. gold on contact area, w ith 0 .0 0 2 54 [.0 0 0 1 0] tin on soldertails, w ith entire contact underplated 0 .0 0 1 2 7 [.0 00050] m in. nickel R elated Product D ata M ateable R eceptacles — pages 80 and 84 Product Specification 1 08-571 97 Packaging M ethod — Tubes N o. of D im ensions Part N um bers Positions AB C A ± 0.10 [± .004] B ± 0.20 [± .008] C ± 0.20 [± .008] 2.00 ± 0.05 [.079 ± .002] 2.00 [.079] A 4.50 ± 0.15 [.177 ± .006] 3.00 ± 0.20 [.118 ± .008] 5.50 ± 0.15 [.217 ± .006] 0.50 ± 0.02 [.020 ± .001] Ø 0.80 [.031] Recommended PCB Layout 2.00 ± 0.10 [.079 ± .004] 5.60 ± 0.15 [.220 ± .006] 3.60 ± 0.20 [.142 ± .008] 6.65 ± 0.20 [.262 ± .008] 2.00 ± 0.10 [.079 ± .004] 2.40 [.094] Sq. Typ. 2.00 [.079] Typ. 2 m m H eaders, Shrouded, D ouble R ow , Thru-H ole, R ight-Angle M ount (Continued)

130 7819 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -522-6752 G erm any: 49-6251-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5-475-6222 China: 86-40 0 -820 -60 15 specified. Values in brackets Specifications subject M exico: 52-55-110 6-0 80 0 Japan: 81-44-844-80 13 AM PM O D U Interconnection System M ETR IC Dim ensions are m illim eters over inches N ote: A ll part num bers are R oH S com pliant. 0.5 [.02] Square Posts M aterial and Finish H ousing — Black color, PA9T (N ylon 9T), U L 94 V-O Rated Posted Contacts — Brass, plated as follow s: 0.00076 [.000003] m in. gold on contact area, w ith 0.00254 [.00010] m atte tin on soldertails, w ith entire contact underplated 0.00127 [.000050] m in. nickel R elated Product D ata M ateable R eceptacles — pages 80, 81, and 84 N o. of D im ensions Part N um bers Positions AB C 5.20 [.205] Ref. 2.40 [.094] C 22.00 [.866] 4.50 [.177] 5.50 [.217] 6.50 [.256] 1.20 [.047]8.00 [.315] Ref. 1.30 [.051] Typ. 2.00 [..079] Pitch 7.50 [1.38] 2.00 ± 0.05 [.079 ± .001] 3.60 ± 0.15 [.142 ± .005] 2.00 ± 0.10 [.079 ± .004] B A Pitch .0.50 [.020] 5.60 ± 0.15 [.220 ± .006] Ref. Cap 2.60 ± 0.15 [.264 ± .010] 1.00 [25.4] 2m m H eaders, Shrouded, D ouble R ow , Surface M ount, Vertical M ount R ecom m ended PC B Layout

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches N ote: A ll part num bers are R oH S com pliant. Receptacle Assemblies, Double Row, Vertical Mount with Vacuum Adapter Cap 0 .5 [.0 2 ] Square Straight Posts M aterial and Finish H ousing — B lack high tem perature therm oplastic, UL 94 V-O R ated Posted C ontacts — P hosphor B ronze, duplex plated as follow s: 0.0 0 0 76[0 .0 0 0 0 30 ] m in. gold on contact area, 0 .0 0 381 [.0 0 0 1 50 ] m in. tin on solder area, w ith entire contact underplated 0 .0 0 1 2 7[.0 00050] m in. nickel Product Specification 1 08-5732 8 Packaging M ethod — Tape and reel N o. of D im ensions Part N um bers Positions ABCD Recom m ended PCB Layout 4.0 [.157 ] 3.6 [.142] 2 .00 [.07 9] 2 .00 [.07 9] 6.2 [.244] 1 .91 ±0.05 [0.7 5±.002] 1 .91 ±0.05 3.02 [.119] 4.50 [.17 7 ] 6.35 [.250] 7.04 [.27 7 ] V acuum A dapter C ap D D A B C 2 .00 [.07 9] TYP 2 .00 [.07 9] TYP 0.51 [.020] TYP 1 .2 [.047 ] TYP 1 .1 4 [.045] TYP 1 .2 0 [.047 ] 2 P lc. 1 .09 [.055] 2 P lc. 7.56 [.298 ] TYP 2 m m H eaders, Shrouded, D ouble R ow , Surface M ount, Vertical M ount (Continued)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches 2 m m H eaders, Shrouded, D ouble R ow , Thru-H ole, Vertical M ount N ote: A ll part num bers are R oH S com pliant. B ox H eader 0 .5 [.0 2 ] Square Straight Posts w ith C able Shroud M aterial and Finish H ousing — B lack therm oplastic, UL 94 V-O R ated Posted C ontacts — B rass, duplex plated as follow s: 0.0 0 2 54 [.0 0 0 1 0 0 ] m in. tin on contact area, w ith entire contact underplated 0.0 0 1 2 7 [.0 0 0 0 50 ] m in. nickel R elated Product D ata M ateable R eceptacles — S ee D raw ings 1 4 70 1 0 6 C ontacts and 1 4 70 1 0 7 Housing Product Specification 1 08-572 1 7 Packaging M ethod — L oose piece, bag N o. of D im ensions Part N um bers Position ABC Recom m ended PCB Layout 2 .00 [.08 ] TYP 0.7±0.1 [.028 ±.004] A 3.0±0.2 [.118 ±.008 ] 0.5±0.05 [.02±.002] 5.00 [1.97 ] 1 .1 5 [.045] 2 .0 [.07 9] TYP 4.3 [.16 9] 6.5 [.256 ] 1 .35 [.053] TYP 2 .0 [.07 9] TYP 0.8 [.031] 3.5 [.138 ] 0.95 [.037 ] TYP 1 .60 [0.6 3] TYP B±0.3 [±.012] A±0.2 5 [+.008 /-.002]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches 2 m m H eaders, Shrouded, D ouble R ow , Thru-H ole, R ight-Angle M ount N ote: A ll part num bers are R oH S com pliant. Pitch Right-Angle Mount 0 .5 [.0 2 ] Square R ight-Angle Posts w ith C able Shroud M aterial and Finish H ousing — B lack therm oplastic, UL 94 V-O R ated Posted C ontacts — B rass, duplex plated as follow s: 0.0 0 2 54 [.0 0 0 1 0 0 ] m in. tin on contact area, w ith entire contact underplated 0.0 0 1 2 7 [.0 0 0 0 50 ] m in. nickel R elated Product D ata M ateable R eceptacles — S ee D raw ings 1 4 70 1 0 6 C ontacts and 1 4 70 1 0 7 Housing Product Specification 1 08-572 1 7 Packaging M ethod — L oose piece, bag N o. of D im ensions Part N um bers Position ABC Recom m ended PCB Layout 2 .00 [.08 ] TYP 0.7±0.1 [.028 ±.004] 3.0±0.2 [.118 ±.008 ] 0.5±0.05 [.02±.002] 2 .0±0.1 [.07 9±.004] 5.00 [1.97 ] 7.00 [.27 6 ] 7.00 [.27 6 ] 1 .1 5 [.045] .079 [2.0] 4.3 [.16 9] 9.5 [.37 4] 1 .35 [.053] TYP 2 .0 [.07 9] TYP 0.8 [.031] 3.5 [.138 ] 0.95 [.037 ] TYP 1 .60 [0.6 3] TYP B±0.3 [±.012] A±0.2 5 [+.008 /-.002]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 M ETRIC Dim ensions are m illim eters over inches 2 m m C enterline R eceptacles, D ouble R ow , Thru-H ole, Vertical M ount N ote: A ll part num bers are R oH S com pliant. 2 .0 M ount Type w /PickUp Part N um bers N o. of D im ensions Plating A Plating B Positions AB D im . L D im . L D im . L D im . L 4 4.0 [.157 ] 2 .0 [.07 9] 147 0209-1 2-147 0209-5 5-147 0209-1 7 -147 0209-5 6 6.0 [.236 ] 4.0 [.157 ] 147 0209-2 2-147 0209-6 5-147 0209-2 7 -147 0209-6 8 8 .0 [.315] 6.0 [.236 ] 147 0209-3 2-147 0209-7 5-147 0209-3 7 -147 0209-7 10 1 0.0 [.394] 8 .0 [.315] 147 0209-4 2-147 0209-8 5-147 0209-4 7 -147 0209-8 12 1 2 .0 [.47 2] 1 0.0 [.394] 147 0209-5 2-147 0209-9 5-147 0209-5 7 -147 0209-9 14 1 4.0 [.551] 1 2 .0 [.47 2] 147 0209-6 3-147 0209-0 5-147 0209-6 8 -147 0209-0 16 1 6.0 [.6 30] 1 4.0 [.551] 147 0209-7 3-147 0209-1 5-147 0209-7 8 -147 0209-1 18 1 8 .0 [.7 09] 1 6.0 [.6 30] 147 0209-8 3-147 0209-2 5-147 0209-8 8 -147 0209-2 20 2 0.0 [.7 8 7 ] 1 8 .0 [.7 09] 147 0209-9 3-147 0209-3 5-147 0209-9 8 -147 0209-3 22 2 2 .0 [.8 6 6 ] 2 0.0 [.7 8 7 ] 1-147 0209-0 3-147 0209-4 6 -147 0209-0 8 -147 0209-4 24 2 4.0 [.945] 2 2 .0 [.8 6 6 ] 1-147 0209-1 3-147 0209-5 6 -147 0209-1 8 -147 0209-5 26 2 6.0 [1.024] 2 4.0 [.945] 1-147 0209-2 3-147 0209-6 6 -147 0209-2 8 -147 0209-6 28 2 8 .0 [1.102] 2 6.0 [1.024] 1-147 0209-3 3-147 0209-7 6 -147 0209-3 8 -147 0209-7 30 30.0 [1.18 1] 2 8 .0 [1.102] 1-147 0209-4 3-147 0209-8 6 -147 0209-4 8 -147 0209-8 32 32 .0 [1.26 0] 30.0 [1.18 1] 1-147 0209-5 3-147 0209-9 6 -147 0209-5 8 -147 0209-9 34 34.0 [1.339] 32 .0 [1.26 0] 1-147 0209-6 4-147 0209-0 6 -147 0209-6 9-147 0209-0 36 36.0 [1.417 ] 34.0 [1.339] 1-147 0209-7 4-147 0209-1 6 -147 0209-7 9-147 0209-1 38 38 .0 [1.496 ] 36.0 [1.417 ] 1-147 0209-8 4-147 0209-2 6 -147 0209-8 9-147 0209-2 40 40.0 [1.57 5] 38 .0 [1.496 ] 1-147 0209-9 4-147 0209-3 6 -147 0209-9 9-147 0209-3 42 42 .0 [1.6 54] 40.0 [1.57 5] 2-147 0209-0 4-147 0209-4 7 -147 0209-0 9-147 0209-4 44 44.0 [1.7 32] 42 .0 [1.6 54] 2-147 0209-1 4-147 0209-5 7 -147 0209-1 9-147 0209-5 46 46.0 [1.8 11] 44.0 [1.7 32] 2-147 0209-2 4-147 0209-6 7 -147 0209-2 9-147 0209-6 48 48 .0 [1.8 90] 46.0 [1.8 11] 2-147 0209-3 4-147 0209-7 7 -147 0209-3 9-147 0209-7 50 50.0 [1.96 9] 48 .0 [1.8 90] 2-147 0209-4 4-147 0209-8 7 -147 0209-4 9-147 0209-8 R eceptacle, Thru-H ole, Vertical M aterial and Finish H ousing — B lack therm oplastic, UL 94 V-O R ated, 2 4 5°C R eflow C ontacts — C opper alloy, plated as follow s: A — 0 .0 0 0 2 0 [.0 0 0 0 0 8] m in. gold on contact area, 0 .0 0 2 0 3 [.000080] m in. tin on solder area, w ith entire contact underplated 0 .0 0 1 2 7 [.0 00050] m in. nickel B — 0 .0 0 0 76 [.0 0 0 0 30 ] m in. gold on contact area, 0 .0 0 2 0 3 [.000080] m in. tin on solder area, w ith entire contact underplated 0 .0 0 1 2 7 [.0 00050] m in. nickel R elated Product D ata M ateable H eaders — pages 66-76, 78, 79 Product Specification 1 08-571 97 Packaging M ethod — Tray 0.5 [.02] 0.5 [.02] 2 .0±0.05 [.07 9±.002] TYP 2 .0±0.1 [.07 9±.004] TYP 0.75±0.05 [.030±.002] TYP 0.2 0 [.008 ] TYP 1 .67 [.06 6 ] R ef. 2 .0±0.05 [.07 9±.002] TYP 2 .0±0.1 [.07 9±.004] 4.00 [.157 ] 4.50 [.17 7 ] 0.36 [.014] B±0.2 [±.008 ] L±0.1 [±.004] A±0.2 5 [±.01] Recom m ended PCB Layout AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches 2 m m C enterline R eceptacles, D ouble R ow, Thru-H ole, Vertical M ount (Continued)

2.0 Mount Type

N ote: A ll part num bers are R oH S com pliant. Part N um bers N o. of D im ensions Plating A Plating B Positions AB D im . L D im . L D im . L D im . L 4 4.0 [.157 ] 2 .0 [.07 9] 17 34506 -1 2-17 34506 -5 5-17 34506 -1 7 -17 34506 -5 6 6.0 [.236 ] 4.0 [.157 ] 17 34506 -2 2-17 34506 -6 5-17 34506 -2 7 -17 34506 -6 8 8 .0 [.315] 6.0 [.236 ] 17 34506 -3 2-17 34506 -7 5-17 34506 -3 7 -17 34506 -7 10 1 0.0 [.394] 8 .0 [.315] 17 34506 -4 2-17 34506 -8 5-17 34506 -4 7 -17 34506 -8 12 1 2 .0 [.47 2] 1 0.0 [.394] 17 34506 -5 2-17 34506 -9 5-17 34506 -5 7 -17 34506 -9 14 1 4.0 [.551] 1 2 .0 [.47 2] 17 34506 -6 3-17 34506 -0 5-17 34506 -6 8 -17 34506 -0 16 1 6.0 [.6 30] 1 4.0 [.551] 17 34506 -7 3-17 34506 -1 5-17 34506 -7 8 -17 34506 -1 18 1 8 .0 [.7 09] 1 6.0 [.6 30] 17 34506 -8 3-17 34506 -2 5-17 34506 -8 8 -17 34506 -2 20 2 0.0 [.7 8 7 ] 1 8 .0 [.7 09] 17 34506 -9 3-17 34506 -3 5-17 34506 -9 8 -17 34506 -3 22 2 2 .0 [.8 6 6 ] 2 0.0 [.7 8 7 ] 1-17 34506 -0 3-17 34506 -4 6 -17 34506 -0 8 -17 34506 -4 24 2 4.0 [.945] 2 2 .0 [.8 6 6 ] 1-17 34506 -1 3-17 34506 -5 6 -17 34506 -1 8 -17 34506 -5 26 2 6.0 [1.024] 2 4.0 [.945] 1-17 34506 -2 3-17 34506 -6 6 -17 34506 -2 8 -17 34506 -6 28 2 8 .0 [1.102] 2 6.0 [1.024] 1-17 34506 -3 3-17 34506 -7 6 -17 34506 -3 8 -17 34506 -7 30 30.0 [1.18 1] 2 8 .0 [1.102] 1-17 34506 -4 3-17 34506 -8 6 -17 34506 -4 8 -17 34506 -8 32 32 .0 [1.26 0] 30.0 [1.18 1] 1-17 34506 -5 3-17 34506 -9 6 -17 34506 -5 8 -17 34506 -9 34 34.0 [1.339] 32 .0 [1.26 0] 1-17 34506 -6 4-17 34506 -0 6 -17 34506 -6 9-17 34506 -0 36 36.0 [1.417 ] 34.0 [1.339] 1-17 34506 -7 4-17 34506 -1 6 -17 34506 -7 9-17 34506 -1 38 38 .0 [1.496 ] 36.0 [1.417 ] 1-17 34506 -8 4-17 34506 -2 6 -17 34506 -8 9-17 34506 -2 40 40.0 [1.57 5] 38 .0 [1.496 ] 1-17 34506 -9 4-17 34506 -3 6 -17 34506 -9 9-17 34506 -3 42 42 .0 [1.6 54] 40.0 [1.57 5] 2-17 34506 -0 4-17 34506 -4 7 -17 34506 -0 9-17 34506 -4 44 44.0 [1.7 32] 42 .0 [1.6 54] 2-17 34506 -1 4-17 34506 -5 7 -17 34506 -1 9-17 34506 -5 46 46.0 [1.8 11] 44.0 [1.7 32] 2-17 34506 -2 4-17 34506 -6 7 -17 34506 -2 9-17 34506 -6 48 48 .0 [1.8 90] 46.0 [1.8 11] 2-17 34506 -3 4-17 34506 -7 7 -17 34506 -3 9-17 34506 -7 50 50.0 [1.96 9] 48 .0 [1.8 90] 2-17 34506 -4 4-17 34506 -8 7 -17 34506 -4 9-17 34506 -8 40* 40.0 [1.57 5] 38 .0 [1.496 ] — 4-17 34506 -9 — 9-17 34506 -9 *Keying position 6 . R eceptacle, Thru-H ole, Vertical M aterial and Finish H ousing — B lack therm oplastic, UL 94 V-O Rated, 2 65°C Process C apable C ontacts — C opper alloy, plated as follow s: A — 0 .0 0 0 2 0 [.0 0 0 0 0 8] m in. gold on contact area, 0 .0 0 2 0 3 [.000080] m in. tin on solder area, w ith entire contact underplated 0 .0 0 1 2 7 [.0 00050] m in. nickel B — 0 .0 0 0 76 [.0 0 0 0 30 ] m in. gold on contact area, 0 .0 0 2 0 3 [.000080] m in. tin on solder area, w ith entire contact underplated 0 .0 0 1 2 7 [.0 00050] m in. nickel R elated Product D ata M ateable H eaders — pages 66-76, 78, 79 Product Specification 1 08-571 97 Packaging M ethod — Tray 0.5 [.02] 0.5 [.02] 2 .0±0.05 [.07 9±.002] TYP 2 .0±0.1 [.030±.002] TYP 0.2 0 [.008 ] TYP 1 .67 [.06 6 ] R ef. 2 .0±0.05 [.07 9±.002] TYP 2 .0±0.1 [.07 9±.004] 4.00 [.157 ] 4.50 [.17 7 ] 0.36 [.014] B±0.2 [±.008 ] L±0.1 [±.004] A±0.2 5 [±.01] Recom m ended PCB Layout

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 M ETRIC Dim ensions are m illim eters over inches Position D im ensions Part N um bers AB 6 6.2 0 [.244] 4.0 [.157 ] 17 346 06 -6 8 8 .2 0 [.323] 6.0 [.236 ] 17 346 06 -8 10 1 0.2 0 [.402] 8 .0 [.315] 1-17 346 06 -0 12 1 2 .2 0 [.48 0] 1 0.0 [.394] 1-17 346 06 -2 14 1 4.2 0 [.559] 1 2 .0 [.47 2] 1-17 346 06 -4 16 1 6.2 0 [.6 38 ] 1 4.0 [.551] 1-17 346 06 -6 18 1 8 .2 0 [.7 17 ] 1 6.0 [.6 30] 1-17 346 06 -8 20 2 0.2 0 [.7 95] 1 8 .0 [.7 09] 2-17 346 06 -0 22 2 2 .2 0 [.8 7 4] 2 0.0 [.7 8 7 ] 2-17 346 06 -2 24 2 4.2 0 [.953] 2 2 .0 [.8 6 6 ] 2-17 346 06 -4 26 2 6.2 0 [1.031] 2 4.0 [.945] 2-17 346 06 -6 28 2 8 .2 0 [1.110] 2 6.0 [1.024] 2-17 346 06 -8 30 30.2 0 [1.18 9] 2 8 .0 [1.102] 3-17 346 06 -0 32 32 .2 0 [1.26 8 ] 30.0 [1.18 1] 3-17 346 06 -2 34 34.2 0 [1.346 ] 32 .0 [1.26 0] 3-17 346 06 -4 36 36.2 0 [1.425] 34.0 [1.339] 3-17 346 06 -6 38 38 .2 0 [1.504] 36.0 [1.417 ] 3-17 346 06 -8 40 40.2 0 [1.58 3] 38 .0 [1.496 ] 4-17 346 06 -0 42 42 .2 0 [1.6 6 1] 40.0 [1.57 5] 4-17 346 06 -2 44 44.2 0 [1.7 40] 42 .0 [1.6 54] 4-17 346 06 -4 46 46.2 0 [1.8 19] 44.0 [1.7 32] 4-17 346 06 -6 48 48 .2 0 [1.8 98 ] 46.0 [1.8 11] 4-17 346 06 -8 50 50.2 0 [1.97 6 ] 48 .0 [1.8 90] 5-17 346 06 -0 2 m m R eceptacle, D ouble R ow , Surface M ount, R ight-Angle M ount N ote: A ll part num bers are R oH S com pliant. 2 m m R eceptacle R eceptacle, Surface M ount, R ight-Angle M aterial and Finish H ousing — B lack T herm oplastic, UL 94 V-0 R ated C ontact — P hosphor B ronze C ontact Finish — 0 .0 0 02 0 [.000008] M in. G old P lated on C ontact A rea, 0.0 0 2 2 9 [.0 0 0 0 90 ] M in. Tin P lated on S older Tail, 0 .0 0 1 2 7 [.0 0 0050] M in. Nickel Underplated Over A ll R elated Product D ata M ateable H eaders — pages 66-73 Product Specification 1 08-571 97 Packaging M ethod — Tape and reel 1 .00 [.039] TYP 0.60±0.05 [.024±.002] TYP 0.1 5±0.03 [.006 ±.001] 5.0±0.2 [.197 ±.008 ] 4.90±0.2 5 [.193±.01] 4.90±0.2 5 [.193±.01] 8 .30±0.5 [.327 ±.02] 2 .00±0.05 [.07 9±.002] 4.00 [.157 ] 2 .00 [.07 9] 4.00 [.157 ] TYP 2 .00 [.07 9] TYP 9.00 [.354] 0.90 [.035] B 1 .1 0 [.042] TYP B±0.1 0 [±.004] A±0.2 5 [±.01] Recom m ended PCB Layout AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches Position D im ensions Part N um bers AB 8 6.0 [.236 ] 8 .50 [.335] 17 34531-8 10 8 .0 [.315] 1 0.50 [.413] 1-17 34531-0 12 1 0.0 [.394] 1 2 .50 [.492] 1-17 34531-2 14 1 2 .0 [.47 2] 1 4.50 [.57 1] 1-17 34531-4 16 1 4.0 [.551] 1 6.50 [.6 50] 1-17 34531-6 18 1 6.0 [.6 30] 1 8 .50 [.7 28 ] 1-17 34531-8 20 1 8 .0 [.7 09] 2 0.50 [.8 07 ] 2-17 34531-0 22 2 0.0 [.7 8 7 ] 2 2 .50 [.8 8 6 ] 2-17 34531-2 24 2 2 .0 [.8 6 6 ] 2 4.50 [.96 5] 2-17 34531-4 26 2 4.0 [.945] 2 6.50 [1.043] 2-17 34531-6 28 2 6.0 [1.024] 2 8 .50 [1.122] 2-17 34531-8 30 2 8 .0 [1.102] 30.50 [1.201] 3-17 34531-0 32 30.0 [1.18 1] 32 .50 [1.28 0] 3-17 34531-2 34 32 .0 [1.26 0] 34.50 [1.358 ] 3-17 34531-4 36 34.0 [1.339] 36.50 [1.437 ] 3-17 34531-6 38 36.0 [1.417 ] 38 .50 [1.516 ] 3-17 34531-8 40 38 .0 [1.496 ] 40.50 [1.594] 4-17 34531-0 42 40.0 [1.57 5] 42 .50 [1.6 7 3] 4-17 34531-2 44 42 .0 [1.6 54] 44.50 [1.7 52] 4-17 34531-4 46 44.0 [1.7 32] 46.50 [1.8 31] 4-17 34531-6 48 46.0 [1.8 11] 48 .50 [1.909] 4-17 34531-8 50 48 .0 [1.8 90] 50.50 [1.98 8 ] 5-17 34531-0 52 50.0 [1.96 9] 52 .50 [2.06 7 ] 5-17 34531-2 54 52 .0 [2.047 ] 54.50 [2.146 ] 5-17 34531-4 56 54.0 [2.123] 56.50 [2.224] 5-17 34531-6 58 56.0 [2.205] 58 .50 [2.303] 5-17 34531-8 6 0 58 .0 [2.28 3] 60.50 [2.38 1] 6 -17 34531-0 6 2 60.0 [2.36 2] 62 .50 [2.46 1] 6 -17 34531-2 6 4 62 .0 [2.441] 64.50 [2.539] 6 -17 34531-4 6 6 64.0 [2.520] 66.50 [2.6 18 ] 6 -17 34531-6 6 8 66.0 [2.598 ] 68 .50 [2.6 97 ] 6 -17 34531-8 7 0 68 .0 [2.6 7 7 ] 70.50 [2.7 7 6 ] 7 -17 34531-0 7 2 70.0 [2.7 56 ] 72 .50 [2.8 54] 7 -17 34531-2 7 4 72 .0 [2.8 34] 74.50 [2.933] 7 -17 34531-4 7 6 74.0 [2.913] 76.50 [3.012] 7 -17 34531-6 7 8 76.0 [2.992] 78 .50 [3.091] 7 -17 34531-8 8 0 78 .0 [3.07 1] 8 0.50 [3.16 9] 8 -17 34531-0 2 m m R eceptacle, D ouble R ow , Thru-H ole, R ight-Angle M ount N ote: A ll part num bers are R oH S com pliant. 2mm Receptacle R eceptacle, Thru-H ole, R ight-Angle M aterial and Finish H ousing — B lack T herm oplastic, UL 94 V-0 R ated C ontact — P hosphor B ronze C ontact Finish — 0 .0 0 02 0 [.000008] M in. G old P lated on C ontact A rea, 0.0 0 2 54 [.0 0 0 1 0 0 ] M in. Tin P lated on S older Tail, 0 .0 0 1 2 7 [.0 0 0050] M in. Nickel Underplated Over A ll R elated Product D ata M ateable H eaders — pages 66-73 Product Specification 1 08-571 97 Packaging M ethod — Tube 2 ±0.1 5 [.07 9±.006 ] 2 ±0.05 [.07 9±.002] 3±0.02 [.118 ±.001] 7.2 ±0.1 5 [.28 3±.006 ] 4.8 5±0.1 5 [.191±.006 ] 1 .5±0.05 [.059±.002] 0.5±0.05 [.008 ±.001] 0.35 [.014] 1 .45 [.057 ] 5.2 [.205] 2 .00 [.07 9] 2 .00 [.07 9] TYP 2 .00 [.07 9] TYP A±0.1 0 [±.004] A A A B±0.2 0 [±.008 ] Recom m ended PCB Layout Section A-A .08 0 [.031] D IA TYP

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ETRIC Dim ensions are m illim eters over inches R eceptacle, Top E ntry, Surface M ount M aterial and Finish H ousing — B lack T herm oplastic, UL 94 V-0 R ated C ontact — C opper A lloy, plated 0.00076 [.0 0 0 0 30 ] M in. G old P lated on C ontact A rea, 0 .0 0 2 54 [.0 0 0 1 0 0 ] Tin P lated on S older Tail, Underplated 0.001 2 7 [.0 0 0 0 50 ] Nickel C ap — T herm oplastic R elated Product D ata M ateable H eaders — pages 66-75, 78, 79 Product Specification 1 08-572 2 7 Packaging M ethod — Tape and reel D im ensions 2 45C Reflow Part N um bers 2 65C Reflow Part N um bers Position AB w ith Alignm ent Peg* w ithout Alignm ent Peg w ith Alignm ent Peg* w ithout Alignm ent Peg 8 6.0 [.236 ] 8 .40 [.331] 17 34516 -8 5-17 34516 -8 204106 9-8 5-204106 9-8 10 8 .0 [.315] 1 0.40 [.409] 1-17 34516 -0 6 -17 34516 -0 1-204106 9-0 6 -204106 9-0 12 1 0.0 [.394] 1 2 .40 [.48 8 ] 1-17 34516 -2 6 -17 34516 -2 1-204106 9-2 6 -204106 9-2 14 1 2 .0 [.47 2] 1 4.40 [.56 7 ] 1-17 34516 -4 6 -17 34516 -4 1-204106 9-4 6 -204106 9-4 16 1 4.0 [.551] 1 6.40 [.6 46 ] 1-17 34516 -6 6 -17 34516 -6 1-204106 9-6 6 -204106 9-6 18 1 6.0 [.6 30] 1 8 .40 [.7 24] 1-17 34516 -8 6 -17 34516 -8 1-204106 9-8 6 -204106 9-8 20 1 8 .0 [.7 09] 2 0.40 [.8 03] 2-17 34516 -0 7 -17 34516 -0 2-204106 9-0 7 -204106 9-0 22 2 0.0 [.7 8 7 ] 2 2 .40 [.8 8 1] 2-17 34516 -2 7 -17 34516 -2 2-204106 9-2 7 -204106 9-2 24 2 2 .0 [.8 6 6 ] 2 4.40 [.96 1] 2-17 34516 -4 7 -17 34516 -4 2-204106 9-4 7 -204106 9-4 26 2 4.0 [.945] 2 6.40 [1.039] 2-17 34516 -6 7 -17 34516 -6 2-204106 9-6 7 -204106 9-6 28 2 6.0 [1.024] 2 8 .40 [1.118 ] 2-17 34516 -8 7 -17 34516 -8 2-204106 9-8 7 -204106 9-8 30 2 8 .0 [1.102] 30.40 [1.197 ] 3-17 34516 -0 8 -17 34516 -0 3-204106 9-0 8 -204106 9-0 32 30.0 [1.18 1] 32 .40 [1.27 6 ] 3-17 34516 -2 8 -17 34516 -2 3-204106 9-2 8 -204106 9-2 34 32 .0 [1.26 0] 34.40 [1.354] 3-17 34516 -4 8 -17 34516 -4 3-204106 9-4 8 -204106 9-4 36 34.0 [1.339] 36.40 [1.433] 3-17 34516 -6 8 -17 34516 -6 3-204106 9-6 8 -204106 9-6 38 36.0 [1.417 ] 38 .40 [1.512] 3-17 34516 -8 8 -17 34516 -8 3-204106 9-8 8 -204106 9-7 40 38 .0 [1.496 ] 40.40 [1.591] 4-17 34516 -0 9-17 34516 -0 4-204106 9-0 9-204106 9-0 *S ee view s 1a and 1b Recom m ended PCB Layout 1 b A 2 .00 [.07 9] TYP 1 .1 2 [.044] 2 .2 5 [.08 9] 6.00 [.236 ] C avity M ark L ocation A lignm ent Peg 2 P lc. R ef. 0.96±0.1 0 [.038 ±.004] 2 .00±0.05 [.07 9±.002] A+2 .00±0.1 0 [.07 9±.004] A+2 .00 [+.07 9] 0.8 5±0.05 [.033±.002] D IA TYP 2 P lc. 8 .00±0.1 5 [.315±.006 ] 4.2 5±0.1 5 [.16 7 ±.006 ] [.315/.07 9±.07 9] 4.8 0±0.1 5 -0.1 3 5.1 0±0.50 [.201±.020] 0.2 0±0.03 [.008 ±.001] 2 .00±0.05 [.07 9±.002] 2 .00 [.07 9] 0.50±0.05 [.020±.002] 0.40±0.05 4.00±0.1 5 [.157 ±.006 ] B±0.2 0 [±.008 ] X X 6.00±0.1 5 [.236 ±.006 ] 0.71 ±0.05 [.028 ±.002] A±0.1 0 [±.004] 1 a Recom m ended PCB Layout (W ithout Alignm ent Peg) A 2 .00 [.07 9] TYP 1 .1 2 [.044] 2 .2 5 [.08 9] 6.00 [.236 ] 2 m m R eceptacle, D ouble R ow , Surface M ount, Vertical M ount N ote: A ll part num bers are R oH S com pliant. 2 m m R eceptacle

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U .0 2 5 [0 .64] Square Interconnection System N ote: A ll part num bers are R oH S com pliant. AMPMODU Interconnection System AM PM O D U H eaders and Receptacles, .1 00 [2 .54] Centerline 1 02 699-4 D R A P 5-1 031 68 -3 D R V T 8 7605-1 B ulkhead H eader 6-1 46490-5 D R S tacking H eader 5-1 031 64-3 3/4 D R R A 5-1 031 66-3 D R R A 1 03577-3 6-5342 37-8 S R Top Entry 6-535541 -0 S R Top Entry 8 72 2 0-8 S R V T 6-1 462 8 1 -0 S R V T B A 6-1 462 93-0 S R V T -R ET B A 8 72 2 7-5 D R V T 1 03336-5 S R A P 1 03542 -9 D R A P 8 72 30-6 D R R A 8 72 32 -9 S R R A Legend: S R S ingle R ow D R D ouble R ow V T V ertical R A R ight A ngle R ET R etention Feature A P A C TION P IN B E B ottom Entry 3/4 3-S ided-S hrouded H eader B A B reakaw ay TR Triple R ow S M T S urface M ount H OR Z H orizontal D E D ual Entry 5-1 0341 4-8 S R V T 5-1 02 2 03-7 S R R A 6-1 462 57-0 D R V T B A 7-1 462 68 -5 D R V T -R ET B A 6-5342 06-0 D R Top Entry 6-534998 -3 D R Top Entry 5-8 78 79-7 S R B ottom Entry 5342 67-1 D R Outrigger D E 5535676-9 S R H OR Z 553551 2 -1 D R H OR Z 5-1 4642 7-5 D R R A -R ET B A 6-1 46306-0 S R R A -R ET B A 5-1 46304-6 S R R A 6-1 46308 -0 D R R A B A For draw ings, technical data or sam ples, contact your TE sales engineer or call the TE P roduct Inform ation C enter: 1-8 00-522-6 7 52

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U .0 2 5 [0 .64] Square Interconnection System (Continued) N ote: A ll part num bers are R oH S com pliant. AM PM OD U Interconnection System For draw ings, technical data or sam ples, contact your TE sales engineer or call the TE P roduct Inform ation C enter: 1-8 00-522-6 7 52 AM PM O D U H eaders and Receptacles, .1 00 [2 .54] Centerline Legend: S R S ingle R ow D R D ouble R ow V T V ertical R A R ight A ngle R ET R etention Feature A P A C TION P IN B E B ottom Entry 3/4 3-S ided-S hrouded H eader B A B reakaw ay TR Triple R ow S M T S urface M ount H OR Z H orizontal D E D ual Entry 6-1 46474-0 SR Stacking H eader 1 -1 47070-1 .045 Sq. Continuous Post 1 -1 47333-1 .02 5 Sq. Continuous Post 5-1 461 32 -4 SR VT SM T 5-535542 -3 D R D E 51 4772 2 -9 SR H O R2 SM T 51 4772 1 -4 SR H O RZ SM T 6-1 471 05-0 D R VT SM T D E 5-1 038 1 7-2 TR VT 5-1 461 34-9 D R VT SM T 5-1 4772 0-9 SR O utrigger D E 5-1 47738 -5 SR VT SM T D E

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U .0 2 5 [0 .64] Square Interconnection System AMPMODU .025 Square Interconnection System The A M PM O D U intercon - nection system provides interconnections w ith a unique m odular concept, utilizing precision form ed receptacle contacts and m ating posts. M ating of the post and receptacle contacts of this system is very tolerant. This is m ade possible by a post w ith a burr-free lead-in and a receptacle contact featuring double cantilever beam s and anti- overstress stops. A M PM O D U receptacle contacts and posts categori - cally fall into three general classifications of products, w hich include: board m ounted posts and recepta - cle assem blies, post headers and w ire-applied contact housings for crim p snap-in pin and receptacle contacts. B oard m ounted receptacle assem blies are available in various geom etries, offering packaging interconnections that include perpendicular, parallel and stacking capabilities. C rim p snap-in pins for 26-22 A W G [0 .1 2-0 .4 m m 2] w ire and crim p snap-in receptacles for 3 2-20 A W G [0 .0 3 -0 .6 m m 2] w ire provide excellent discrete w ire term inations. Housings for these contacts provide ease of handling term inations in high density applications. M achine applied term ina - tions, through m atched application equipm ent, are geared for virtually any pro- duction volum e requirem ent, for the low est possible applied cost. A M PM O D U m ating posts are supplied typically as headers. They are available in various populations to m eet the interconnection and packaging require - m ents of m ost system s. How ever, in instances w here packaging configurations do not lend them selves to the econom ies of headers, TE can provide application equipm ent for the discrete location of individual posts. Looking at the electronic industry's standard “levels of packaging,” the A M PM O D U .0 25 [0 .64] square intercon - nection system is prim arily used in levels three and four. In level three it is used as a connection betw een tw o or m ore printed circuits. A m other/daughter board connection is typical. In level four it is used as a connection betw een tw o subassem blies, such as a pow er supply and an asso - ciated subassem bly. It is also im portant to note this product can serve as an interconnection in m ore than one level, depending on the application. The .0 25 [0 .64] square interconnection system offers the m ost com plete line of post/receptacle pack - aging products available today. This system , rated at 3 am peres per contact, has been used by alm ost every industry and m arketplace over the last decade and is one of the oldest, m ost ver - satile and reliable intercon - nection system s em ploying .0 25 [0 .64] square packag - ing technology. O ffers standard, interm ediate and high pressure contact forces Insulation S upport B arrel W ire C rim p B arrel R ugged— self- supporting one-piece contact body W ire entry for post to receptacle m isalignm ent R eliability— dual cantilever spring contact design and built-in anti-overstress C antilever B eam s W ide M isalignm ent Tolerance A nti-overstress The A M PM O D U receptacle cross-section is prim arily rectangular, w ith rounded corners. Tw o integral canti- lever beam s contact the m ating square or round m ale posts. D eflection of these spring m em bers is lim ited by anti-overstress stops, and excessive per - m anent deform ation is pre - vented. This feature allow s a w ide range for tolerance of m isalignm ent of m ating contacts. The configuration of the receptacle com pletely encloses the spring m em bers preventing dam age during handling and assem bly and m akes the system com pati - ble w ith autom atic applica - tion techniques. N ote: A pplication of a contact lubricant is part of the m anufacturing process of all A M PM OD U tin-plated crim p products. How ever, it is not part of the m anufacturing process of products that custom ers w ill solder, then clean. For these products, T E recom m ends that custom ers use contact lubricant. S ee the T E w eb page for further inform ation. R eceptacle C ontacts R eceptacle-C losed E ntry H ousing D esign The closed entry housing style better elim inates the chance of a m ating post stubbing on the edges of the receptacle contact. Closed Entry C ontact edges enclosed in plastic A ccess W ay C ontact edges enclosed in plastic M etallic post stop Term s E xplained

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System W ire-to-B oard, .10 0 [2 .54] C enterline Products W ire-to-B oard Products W ire Size Product F am ily AW G [m m 2 ] 20 0.5-0.6 L ocking C lip, M od. I V, I V.v, V, M T, S hort Point 22-30 0.3-0.05 L ocking C lip, M od. I V, I V.v, V, M TE, M T, S hort Point 32 0.03 M od. I V, I V.v, V, S hort Point Platings Product F am ily .00001 5 [0.00038 ] M od. I V, I V.v, V, M TE, M T, S hort Point G old .000030 [0.0007 6 ] L ocking C lip, M od. I V, I V.v, V, M TE, M T, S hort Point G old .000050 [0.00127 ] L ocking C lip, M od. I V, I V.v, V, M T G old Tin L ocking C lip, M od. I V, I V.v, V, M TE, M T, S hort Point W ire Sizes C ontact Platings Post Lengths Product F am ily .2 2 2 -.2 73 [5.6 4-6 .93] M T A ssem bly w ith S tandard P ressure C ontacts .2 00-.2 73 [5.08 -6 .93] M T A ssem bly w ith H igh P ressure C ontacts .2 00-.2 50 [5.08 -6 .35] M TE A ssem bly .1 69-.2 59 [4.29-6 .58 ] S hort Point C onnector A ssem bly .2 73-.350 [6 .93-8 .8 9] L ocking C lip (C onnector A ssem bly) .2 00-.2 77 [5.08 -7 .04] L ocking C lip (S ingle C ontact) M ating Post Lengths Application Tooling Application Tooling Product F am ily D escription M od. IV, M T Locking M TE Short Level V IV.v, V Clip Point M anual H and Tools (W ire C rim p) •• • • M anual H and Tools (ID C ) ••• A M P -O-M A TIC S tripper/C rim per •• •M achines w ith A pplicator C H A M P OM A TOR ••M odel 2.5 M achine C H A M P OM A TOR •M odel 3A M achine A M P -O-L EC TR IC •• •M achines w ith A pplicator P neum atic H and Tools •• ••• • ID C Electric Pow er U nit • Tube-Fed R ibbon •C able M achine A M P OM A TOR C L S M achines •• • D iscrete W ire M achine •• M anual A rbor Tool •• P neum atic A rbor Tool ••

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System B oard-to-B oard Solutions Guide, .10 0 [2 .54] C enterline Products .100 [2.54] Centerline Products Custom er Requirem ent TE's Potential Solution Catalog Page(s) M od IV Polarized H ousing 220 A pplication R equires M TE L atched R eceptacle and H eader 230, 231, 244-250 G uidance, Polarization M T w ith Polarizing C overs 256 -258 S hort Point Polarized H ousing 224 W ire-to-W ire A pplication M od IV R eceptacle C ontacts and P ins 211-213 W ire-to-W ire A pplication (L atched) M TE L atched R eceptacle and S hrouded P in A ssem bly 230, 231, 236 , 237 W ire-to-W ire A pplication (Through Panel) M TE Panel M ount 242 H igh V ibration and S hock A pplications L ocking C lip C ontacts and H ousings 207 -209 P rinted C ircuit B oard Polarization M TE H eader w ith P C B oard Orientation Peg 248 , 249 B oard R equires S urface M ount C apability M TE S urface M ount H eaders 251, 252 M TE H igh Tem perature C om patible H eaders 249, 250 N eed to m ate to M od IV Ejection H ousing 220 A M P -L A TC H Eject H eaders N eed to M inim ize S train to C able M T w ith Eject C overs 256 -259 M od IV H ousing w ith S train R elief 218 , 219 A pplication R equires L ocking C lip C ontacts 207 , 298 S elf-R etaining C ontacts H eader S ecured to B oard M TE H eaders w ith Post R etention or H olddow ns 244-250 D uring/P rior to S oldering M ate to U nshrouded H eader M od IV plain H ousing w ith M od V C ontacts 213, 214, 216 w ith R etention R equirem ents M TE w ith H igh P ressure C ontacts 234, 235 M ultiple C ables to be M TE C oupling S hroud, D ouble- or S ingle-R ow 240, 241 C om m on to One H eader R ight-A ngle C able D ress M T w ith H erm aphroditic C overs 229, 256 , 257 , 259 A pplication R equires C rim p S hort Point C ontacts 222 C ontacts and M TE H ousings H ousings and End-to-End and S hort Point D ouble-R ow H ousing, 223, 228 , 229 S ide-to-S ide S tackable M TE P lain H ousing C onnector M ust M ate to S hort Point C ontacts 222 Post L engths of .16 9 [4.29] M in. W ire-to-B oard Solutions Guide, .10 0 [2 .54] C enterline Products Single-Row Single-Row D ouble-Row D ouble-Row Problem or Concern TE's Vertical H eaders Right-Angle H eaders, Vertical H eaders Right-Angle H eaders, Potential Solution and Receptacles H orizontal Receptacles and Receptacles H orizontal Receptacles (Page Ref.) (Page Ref.) (Page Ref.) (Page Ref.) H eaders Float Off B oard H EAD ERS R etention Feature: S oldering Operation U nshrouded 102 103 198 199 S hrouded —— 104, 199 105, 200 H eader C ontacts D am aged S hrouded H EAD ERS: D uring M anufacturing S tandard P rofile 115 116 117 -121 122-128 Operation or In-Field U se P ress-Fit A C TION P IN P OS T H EAD ERS: U nshrouded 146 — 147 — S hroude d— — 148 , 149, 199 — M achine A pplied 16 3, 16 4 Posts B oard/B ackplane R equires S urface-M ount C om patible Thru-H ole: H igh Tem perature S urface- H EAD ERS: M ount C om patibility U nshrouded 102* 103* 104* 105* S hrouded —— 130 *, 137 * 138 * (L ow P rofile) RECEPTACLES —— 196 * 195* S urface-M ount: H EAD ERS 109* — 110 — RECEPTACLES 18 7 , 18 8 17 2 18 9-192 17 3 A pplication R equires B oard Tw o-P iece Fam ily: w /G uide Posts: G uidance, Polarization and/or H EAD ERS —— 198 , 199 200 B lind-M ate C apability RECEPTACLES —— 196 * 195* M od IV L ow P rofile RECEPTACLES: R eduction in Parallel TO P EN TRY: B oard-to-B oard S tack H eight Thru-H ole 17 8 — 17 9, 18 0* — N ecessary (R efer to Parallel S urface-M ount —— — — S tack G uide on Page 6 2.) BO TTO M EN TRY: Thru-H ole 17 7 ——— S urface-M ount —— — — D U AL EN TRY Thru-H ole 18 1 — 18 2-18 4 — S urface M ount 18 7 , 18 8 — 18 9-192 — S oldering P roblem s w ith RECEPTACLES: Thru-H ole B ottom Entry B ottom Entry R eceptacles (M ust M ask Outrigger 18 1 — 18 2 —Post H oles in B oard D uring (S eparate H oles for S oldering Operation) R eceptacle L eads and M ating L eads) End-to-End S tackable: H EAD ERS (U nshrouded): A pplication R equires Thru-H ole 93, 102 94, 95, 103* 96 , 97 , 104* 98 . 99. 105 C onnectors to be End-to-End Thru-H ole* 102* 103* 104* 108 * S tackable on .100 [2.54] G rid S urface-M ount 109* — 110* — RECEPTACLES: Thru-H ole 17 5, 17 7 , 17 8 , 18 1 16 9* 17 6 , 17 9, 18 0*, 18 2*, 18 3, 18 4 17 0 S urface M ount 18 8 17 2 191, 192 17 3 *H igh tem perature com patible version, refer to page ref. listed.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ating Post Selection Guide M ating Post Selection Guide The follow ing selection guide is provided to help in choosing a m ating product after a receptacle, header or post has been selected. In som e instances refer - ences are given on the cat - alog page to specific m at - ing connectors. In other instances the reader is referred here to the selec - tion guide for m ating prod - uct recom m endations. If your application require - m ent is not answ ered here, consult TE for further recom m endations. Posts W ithout Shoulders F or draw n w ire products (ie, A M PM O D U B reakaw ay and Low Profile Headers) and for products having the shoulder of the post below the housing or pc board surface (ie, A M PM O D U M TE and Single Row Shrouded Headers) the effective m ating length starts at the housing or pc board surface. Posts W ith Shoulders F or product having the shoulder of the post extending above the hous - ing or pc board surface (ie, Standard A M PM O D U Shrouded and U nshrouded Headers) the effective m at - ing length starts at the top of the shoulder. Recom m ended Effective Receptacle Type M ating Posts Lengths M inim um M axim um A M P M OD U M od II H orizontal B oard M ount R eceptacle, S ingle and D ouble R ow, S hort .2 30 [5.8 4] .2 8 0 [7 .11] Point-of-C ontact— pages 16 9, 17 0, 17 2, 17 3 A M P M OD U M od II V ertical B oard M ount R eceptacle, S ingle R ow, S tandard P rofile, .1 8 3 [4.6 5] .330 [8 .38 ] Top Entry— page 17 5 A M P M OD U M od II V ertical B oard M ount R eceptacle, S tandard .1 8 3 [4.6 5] .330 [8 .38 ] P rofile, D ouble R ow, Top Entry, 100 x .100 m t.— page 17 6 A M P M OD U M od IV V ertical B oard M ount R eceptacle, L ow .1 8 3 [4.6 5] .2 55 [6 .48 ] P rofile, S ingle R ow, Top Entry, S ingle Tine— page 17 8 A M P M OD U M od IV V ertical B oard M ount R eceptacle, L ow .2 8 0 [7 .11] P rofile, S ingle R ow, B ottom Entry— * page 17 7 A M P M OD U M od IV V ertical B oard M ount R eceptacle, L ow .1 8 3 [4.6 5] .2 55 [6 .48 ] P rofile, D ouble R ow, Top Entry— pages 17 9, 18 0 A M P M OD U S urface-M ount R eceptacle, Top Entry .1 8 3 [4.6 5] * V ertical B oard M ount, S ingle R ow, D ual Entry— page 18 7 , 18 8 B ottom Entry .2 04 [5.18 ] * A M P M OD U M od IV V ertical B oard M ount R eceptacle, L ow Top Entry .1 8 3 [4.6 5] * P rofile, D ouble R ow, D ual Entry— B ottom Entry .2 04 [5.18 ] *page 18 2 A M P M OD U S urface-M ount R eceptacle, Top Entry .1 8 3 [4.6 5] * V ertical B oard M ount, D ouble R ow, D ual Entry— page 18 9-192 B ottom Entry .2 04 [5.18 ] * A M P M OD U .6 00 [15.24] M od IV H ousing w ith S tandard P ressure C ontacts— .2 1 0 [5.33] .2 8 3 [7 .19] pages 211-220 A M P M OD U .6 00 [15.24] M od IV H ousing w ith Interm ediate P ressure C ontacts— .2 05 [5.21] .2 8 3 [7 .19] pages 211-220 A M P M OD U .6 00 [15.24] M od IV H ousing w ith H igh P ressure C ontacts— .1 8 5 [4.7 0] .2 8 3 [7 .19] pages 211-220 A M P M OD U M od IV V ertical B oard M ount R eceptacle, L ow Top Entry .1 8 3 [4.6 5] * P rofile, S ingle R ow, D ual Entry— B ottom Entry .2 04 [5.18 ] *page 18 1 Recom m ended Effective Receptacle Type M ating Posts Lengths M inim um M axim um S hort Point H ousing w ith C ontacts— .1 69 [4.29] .2 59 [6 .58 ] pages 222-224 A M P M OD U M TE U nloaded H ousing w ith .1 69 [4.29] .2 59 [6 .58 ] S hort Point C ontacts— pages 222, 229, 231, 233 A M P M OD U M TE .2 00 [5.08 ] .2 50 [6 .35] ID C A ssem blies A M P M OD U M T ID C A ssem bly w ith .2 2 2 [5.6 4] .2 73 [6 .93] S tandard P ressure C ontacts— page 256 A M P M OD U M T ID C A ssem bly w ith .2 00 [5.08 ] .2 73 [6 .93] H igh P ressure C ontacts— page 257 L ocking C lip H ousing w ith .2 73 [6 .93] .350 [8 .8 9] C ontacts— pages 207 -209 L ocking C lip C ontact w ithout .2 00 [5.08 ] .2 77 [7 .04] H ousing— page 207 Flexible Flat C onductor C able S ingle R ow .2 67 [6 .7 8 ] .32 3 [8 .20] R eceptacle w ith R ound W ire C rim p H igh P ressure C ontact— D ouble R ow .2 8 2 [7 .16 ] .32 3 [8 .20] C atalog 8 2007 Flexible Flat C onductor C able S ingle R ow .2 1 0 [5.33] .32 3 [8 .20] R eceptacle w ith M ultiple W ire C rim p H igh P ressure C ontact— D ouble R ow .2 2 5 [5.7 2] .32 3 [8 .20] C atalog 8 2007 Flexible Flat C onductor C able S ingle R ow .2 67 [6 .7 8 ] .32 3 [8 .20] R eceptacle w ith R ound W ire C rim p S tandard P ressure D ouble R ow .2 8 2 [7 .16 ] .32 3 [8 .20] C ontact— C atalog 8 2007 Flexible Flat C onductor C able S ingle R ow .2 2 0 [5.59] .32 3 [8 .20] R eceptacle w ith M ultiple C rim p S tandard P ressure C ontact— D ouble R ow .2 35 [5.97 ] .32 3 [8 .20] C atalog 8 2007 *M axim um post length is determ ined by custom er’s application; (i.e., available space beyond rear of horizontal receptacle assem bly, or above bottom entry ver - tical receptacle assem bly or below vertical receptacle assem blies used in pass through applications). Effective M ating L ength Effective M ating L ength

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Parallel Stacking Guide for B oard-to-B oard Applications Parallel Stacking Guide See D im ension Product F am ily F igure Betw een H eaders Single-Row D ouble-Row Product F am ily Single-Row D ouble-Row .060 [1.52] B andolier Posts 16 3 N A D ual Entry, M od IV 17 7 , 18 1, 18 2-18 4, 18 7 , 18 8 18 9-192 1 .090 [2.29] B reakaw ay 102 104 D ual Entry, M od IV 17 7 , 18 1, 18 2-18 4, (U nshrouded) 18 7 , 18 8 18 9-192 .1 53 [3.8 9] S urface M ount N A 110 D ual Entry, M od IV 17 7 , 18 1, 18 2-18 4, B reakaw ay (U nshrouded) 18 7 , 18 8 18 9-192 .2 65 [6 .7 3] B andolier Posts 16 3 137 Top Entry, M od IV 17 8 , 18 1 17 9, 18 0, 18 7 , 18 8 18 2-18 4, 18 9-192 2 .355 [9.02] B reakaw ay 102 104 Top Entry, M od IV 17 8 , 18 1 17 9, 18 0, (U nshrouded) 18 7 , 18 8 18 2-18 4, 18 9-192 .38 5 [9.7 8 ] L ow P rofile S hrouded N A 135, 137 Top Entry, M od IV N A 17 9,18 0 3 .41 8 [1.06 ] S urface M ount 109 110 S urface M ount**, M od IV , 18 7 , 18 8 18 9-192 B reakaw ay (U nshrouded) Top Entry 2* .430 [10.92] B reakaw ay 102 104** Top Entry, M od II 17 5 17 6 (U nshrouded) 4* .440 [11.18 ] S hrouded, M od II 115, 116 117 , 119 Top Entry, M od II or M od IV 17 5, 17 8 17 6 , 17 9, 18 0 .52 8 [13.41] S tacking S hroud N A 156 (H ood) Inner B oard R eceptacle N A 157 (S ee N ote 2.) (S ee N ote 2.) .547 [13.8 9] S tacking S hroud N A 16 0 Outer B oard R eceptacle N A 158 (S ee N ote 2.) (S ee N ote 2.) 4 .550 [13.97 ] Tw o-P iece H eader N A 198 , 199 Tw o-P iece R eceptacle N A 196 C onnector S ystem C onnector S ystem .748 [19.00] S tacking S hroud N A 156 (H ood) Inner B oard R eceptacle N A 157 (S ee N ote 2.) (S ee N ote 2.) .768 [19.51] S tacking S hroud N A 16 1 Outer B oard R eceptacle N A 158 (S ee N ote 2.) (S ee N ote 2.) V arious S tacking U nshrouded 112 113 M od II/IV R eceptacles, V arious V arious Top/B ottom Entry **H igh tem perature version available, see page ref. listed. N otes: 1. H eaders listed are standard thru-hole versions. M any headers are available w ith retention feature and A C TION P IN posts. S ee product N otes: 1. specification pages in individual sections for option availability. B oard-to-B oard Stacking H eights (B y R eceptacle/H eader C om bination) F igure 1 D ouble-Row , M od IV, Bottom Entry, Breakaw ay H eader R eceptacle A ssem bly .2 65 [6 .7 3] .090 [2.29] H eader F igure 2 D ouble-Row , M od IV, Top Entry, Breakaw ay H eader *M od II R eceptacle H eight is .340 [8 .6 4] for a total stack height of .430 [10.92] R eceptacle A ssem bly .2 65* [6 .7 3] .090 [2.29] F igure 3 D ouble-Row , M od IV, Surface-M ount, Top Entry, Receptacle and Surface-M ount Breakaw ay H eader R eceptacle A ssem bly .41 8 [10.6 2] .1 53 [3.8 9] H eader .2 65 [6 .7 3] F igure 4 D ouble-Row , Tw o-Piece Receptacle and Tw o-Piece Shrouded H eader *M od II S hrouded H eader H eight is .440 [11.18 ] for a total stack height of .440 [11.18 ] .550* [13.97 ] .355 [9.02] H eader

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard H eaders— Unshrouded Unshrouded H eaders Product Facts I Variety of popular sizes available I Substantial tim e/labor savings— install all posts at one tim e I Vertical and right-angle versions available in single- and double-row configurations I Triple-row version available in vertical configuration w ith .2 30 [5.84] m ating length I C opper alloy posts I C hoice of select gold or tin plated posts I M ating length for single and double row is .318 [8.0 8] (.2 78 [7.0 6] effective m at - ing length-see page 90 ) I Flam e retardant, black therm oplastic housings; 94V-0 rated I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 Perform ance C haracteristics E lectrical Insulation R esistance — 5,0 0 0 m egohm s m inim um initial D ielectric W ithstanding Voltage —

750 V rm s at sea level

Operating Tem perature — -65°C to + 1 05°C (black therm oplastic housings) C urrent — 3 am peres m axim um per contact (dependent upon m ating connector) R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard H eaders— Unshrouded, Single R ow , .10 0 [2 .54] C enterline Unshrouded Headers N o. of D im ensions Post Plating/Part N os. Pos. A B Plating A Plating B 1 .08 4 [2.13] — 8 7 220-1 8 7 224-1 2 .1 8 4 [4.6 7 ] .1 00 [2.54] 8 7 220-2 8 7 224-2 3 .2 8 4 [7 .21] .2 00 [5.08 ] 8 7 220-3 8 7 224-3 4 .38 4 [9.7 5] .300 [7 .6 2] 8 7 220-4 8 7 224-4 5 .48 4 [12.29] .400 [10.16 ] 8 7 220-5 8 7 224-5 6 .58 4 [14.8 3] .500 [12.7 0] 8 7 220-6 8 7 224-6 7 .68 4 [17 .37 ] .600 [15.24] 8 7 220-7 8 7 224-7 8 .78 4 [19.91] .700 [17 .7 8 ] 8 7 220-8 8 7 224-8 9 .8 8 4 [22.45] .8 00 [20.32] 8 7 220-9 8 7 224-9 10 .98 4 [24.99] .900 [22.8 6 ] 1-8 7 220-0 1-8 7 224-0 11 1 .08 4 [27 .53] 1 .000 [25.40] 1-8 7 220-1 1-8 7 224-1 12 1 .1 8 4 [30.07 ] 1 .1 00 [27 .94] 1-8 7 220-2 1-8 7 224-2 13 1 .2 8 4 [32.6 1] 1 .2 00 [30.48 ] 1-8 7 220-3 1-8 7 224-3 14 1 .38 4 [35.15] 1 .300 [33.02] 1-8 7 220-4 1-8 7 224-4 15 1 .48 4 [37 .6 9] 1 .400 [35.56 ] 1-8 7 220-5 1-8 7 224-5 16 1 .58 4 [40.23] 1 .500 [38 .10] 1-8 7 220-6 1-8 7 224-6 17 1 .68 4 [42.7 7 ] 1 .600 [40.6 4] 1-8 7 220-7 1-8 7 224-7 18 1 .78 4 [45.31] 1 .700 [43.18 ] 1-8 7 220-8 1-8 7 224-8 19 1 .8 8 4 [47 .8 5] 1 .8 00 [45.7 2] 1-8 7 220-9 1-8 7 224-9 20 1 .98 4 [50.39] 1 .900 [48 .26 ] 2-8 7 220-0 2-8 7 224-0 21 2 .08 4 [52.93] 2 .000 [50.8 0] 2-8 7 220-1 2-8 7 224-1 22 2 .1 8 4 [55.47 ] 2 .1 00 [53.34] 2-8 7 220-2 2-8 7 224-2 23 2 .2 8 4 [58 .01] 2 .2 00 [55.8 8 ] 2-8 7 220-3 2-8 7 224-3 24 2 .38 4 [6 0.55] 2 .300 [58 .42] 2-8 7 220-4 2-8 7 224-4 25 2 .48 4 [6 3.09] 2 .400 [6 0.96 ] 2-8 7 220-5 2-8 7 224-5 26 2 .58 4 [6 5.6 3] 2 .500 [6 3.50] 2-8 7 220-6 2-8 7 224-6 27 2 .68 4 [6 8 .17 ] 2 .600 [6 6 .04] 2-8 7 220-7 2-8 7 224-7 28 2 .78 4 [7 0.7 1] 2 .700 [6 8 .58 ] 2-8 7 220-8 2-8 7 224-8 29 2 .8 8 4 [7 3.25] 2 .8 00 [7 1.12] 2-8 7 220-9 2-8 7 224-9 30 2 .98 4 [7 5.7 9] 2 .900 [7 3.6 6 ] 3-8 7 220-0 3-8 7 224-0 31 3.08 4 [7 8 .33] 3.000 [7 6 .20] 3-8 7 220-1 3-8 7 224-1 32 3.1 8 4 [8 0.8 7 ] 3.1 00 [7 8 .7 4] 3-8 7 220-2 3-8 7 224-2 33 3.2 8 4 [8 3.41] 3.2 00 [8 1.28 ] 3-8 7 220-3 3-8 7 224-3 34 3.38 4 [8 5.95] 3.300 [8 3.8 2] 3-8 7 220-4 3-8 7 224-4 35 3.48 4 [8 8 .49] 3.400 [8 6 .36 ] 3-8 7 220-5 3-8 7 224-5 36 3.58 4 [91.03] 3.500 [8 8 .90] 3-8 7 220-6 3-8 7 224-6 37 3.68 4 [93.57 ] 3.600 [91.44] 3-8 7 220-7 3-8 7 224-7 38 3.78 4 [96 .11] 3.700 [93.98 ] 3-8 7 220-8 3-8 7 224-8 39 3.8 8 4 [98 .6 5] 3.8 00 [96 .52] 3-8 7 220-9 3-8 7 224-9 40 3.98 4 [101.19] 3.900 [99.06 ] 4-8 7 220-0 4-8 7 224-0 A .2 00 [5.08 ] R ef. (C ontact A rea) B .042 [1.07 ] Typ. .0 2 5 [0 .64] Square Straight Post M aterial and Finish H ousing — B lack therm oplastic, Posts — C opper alloy, plated as fol - low s: Plating A — S electively plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire post Plating B — S electively plated .00 0 0 1 5 [0 .0 0 0 38] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire post Tin/N ickel — P lating option available; m inim um order quantities m ay apply. C onsult T E . R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. .1 2 5 [3.18 ] .31 8 [8 .08 ] .046/.038 [1.17 /0.97 ] B .1 00* [2.54] .035±.003 [0.8 9±0.08 ] D ia. Typ. Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .1 00 [2.54] Typ. .090 [2.29] .050 [1.27 ] M ax. Typ. N ote: A ll part num bers are R oH S com pliant.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard H eaders— Unshrouded, Single R ow, .10 0 [2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Unshrouded H eaders .02 5 [0.6 4] Typ. .1 39 [3.53] R ef. .0 2 5 [0 .64] Square R ight-Angle Post M aterial and Finish H ousing — B lack therm oplastic, Posts — C opper alloy, plated as follow s: Plating A — S electively plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire post Plating B — S electively plated .00 0 0 1 5 [0 .0 0 0 38] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire post Tin/N ickel — P lating option available; m inim um order quantities m ay apply. C onsult T E . R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. B.1 00* [2.54] Typ. .035±.003 [0.8 9±0.08 ] D ia. Typ. Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .1 38 [3.51] R ef. .1 1 0 [2.7 9] R ef. .069 [1.7 5] Typ. .2 00 [5.08 ] C ontact A rea .040 [1.02] R ef. .31 8 [8 .08 ] R ef. .1 00 [2.54] .02 5 [0.6 4] .069 [1.7 5] .1 57 [3.99] N o. of D im ensions Post Plating/Part N os. Pos. AB Plating A Plating B 1 .08 4 [2.13] — 8 7 232-1 8 7 233-1 2 .1 8 4 [4.6 7 ] .1 00 [2.54] 8 7 232-2 8 7 233-2 3 .2 8 4 [7 .21] .2 00 [5.08 ] 8 7 232-3 8 7 233-3 4 .38 4 [9.7 5] .300 [7 .6 2] 8 7 232-4 8 7 233-4 5 .48 4 [12.29] .400 [10.16 ] 8 7 232-5 8 7 233-5 6 .58 4 [14.8 3] .500 [12.7 0] 8 7 232-6 8 7 233-6 7 .68 4 [17 .37 ] .600 [15.24] 8 7 232-7 8 7 233-7 8 .78 4 [19.91] .700 [17 .7 8 ] 8 7 232-8 8 7 233-8 9 .8 8 4 [22.45] .8 00 [20.32] 8 7 232-9 8 7 233-9 10 .98 4 [24.99] .900 [22.8 6 ] 1-8 7 232-0 1-8 7 233-0 11 1 .08 4 [27 .53] 1 .000 [25.40] 1-8 7 232-1 1-8 7 233-1 12 1 .1 8 4 [30.07 ] 1 .1 00 [27 .94] 1-8 7 232-2 1-8 7 233-2 13 1 .2 8 4 [32.6 1] 1 .2 00 [30.48 ] 1-8 7 232-3 1-8 7 233-3 14 1 .38 4 [35.15] 1 .300 [33.02] 1-8 7 232-4 1-8 7 233-4 15 1 .48 4 [37 .6 9] 1 .400 [35.56 ] 1-8 7 232-5 1-8 7 233-5 16 1 .58 4 [40.23] 1 .500 [38 .10] 1-8 7 232-6 1-8 7 233-6 17 1 .68 4 [42.7 7 ] 1 .600 [40.6 4] 1-8 7 232-7 1-8 7 233-7 18 1 .78 4 [45.31] 1 .700 [43.18 ] 1-8 7 232-8 1-8 7 233-8 19 1 .8 8 4 [47 .8 5] 1 .8 00 [45.7 2] 1-8 7 232-9 1-8 7 233-9 20 1 .98 4 [50.39] 1 .900 [48 .26 ] 2-8 7 232-0 2-8 7 233-0 .042 [1.07 ] Typ. A B

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard H eaders— Unshrouded, Single R ow, .10 0 [2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Unshrouded Headers N o. of D im ensions Post Plating/Part N os. Pos. AB Plating A Plating B 21 2 .08 4 [52.93] 2 .000 [50.8 0] 2-8 7 232-1 2-8 7 233-1 22 2 .1 8 4 [55.47 ] 2 .1 00 [53.34] 2-8 7 232-2 2-8 7 233-2 23 2 .2 8 4 [58 .01] 2 .2 00 [55.8 8 ] 2-8 7 232-3 2-8 7 233-3 24 2 .38 4 [6 0.55 2 .300 [58 .42] 2-8 7 232-4 2-8 7 233-4 25 2 .48 4 [6 3.09] 2 .400 [6 0.96 ] 2-8 7 232-5 2-8 7 233-5 26 2 .58 4 [6 5.6 3] 2 .500 [6 3.50] 2-8 7 232-6 2-8 7 233-6 27 2 .68 4 [6 8 .17 ] 2 .600 [6 6 .04] 2-8 7 232-7 2-8 7 233-7 28 2 .78 4 [7 0.7 1] 2 .700 [6 8 .58 ] 2-8 7 232-8 2-8 7 233-8 29 2 .8 8 4 [7 3.25] 2 .8 00 [7 1.12] 2-8 7 232-9 2-8 7 233-9 30 2 .98 4 [7 5.7 9] 2 .900 [7 3.6 6 ] 3-8 7 232-0 3-8 7 233-0 31 3.08 4 [7 8 .33] 3.000 [7 6 .20] 3-8 7 232-1 3-8 7 233-1 32 3.1 8 4 [8 0.8 7 ] 3.1 00 [7 8 .7 4] 3-8 7 232-2 3-8 7 233-2 33 3.2 8 4 [8 3.41] 3.2 00 [8 1.28 ] 3-8 7 232-3 3-8 7 233-3 34 3.38 5 [8 5.95] 3.300 [8 3.8 2] 3-8 7 232-4 3-8 7 233-4 35 3.48 4 [8 8 .49] 3.400 [8 6 .36 ] 3-8 7 232-5 3-8 7 233-5 36 3.58 4 [91.03] 3.500 [8 8 .90] 3-8 7 232-6 3-8 7 233-6 37 3.68 4 [93.57 ] 3.600 [91.44] 3-8 7 232-7 3-8 7 233-7 38 3.78 4 [96 .11] 3.700 [93.98 ] 3-8 7 232-8 3-8 7 233-8 39 3.8 8 4 [98 .6 5] 3.8 00 [96 .52] 3-8 7 232-9 3-8 7 233-9 40 3.98 4 [101.19] 3.900 [99.06 ] 4-8 7 232-0 4-8 7 233-0

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard H eaders— Unshrouded, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Unshrouded H eaders A .2 00 [5.08 ] R ef. (C ontact A rea) B .042 [1.07 ] Typ. .0 2 5 [0 .64] Square Straight Post M aterial and Finish H ousing — B lack therm oplastic, Posts — C opper alloy, plated as follow s: Plating A — S electively plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire post Plating B — S electively plated .00 0 0 1 5 [0 .0 0 0 38] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire post Tin/N ickel — P lating option available; m inim um order quantities m ay apply. C onsult T E . R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. .1 2 5 [3.18 ] .31 8 [8 .08 ] .046/.038 [1.17 /0.97 ] B .1 00* [2.54] .035±.003 [0.8 9±0.08 ] D ia. Typ. Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .1 00 [2.54] .1 00 [2.54] Typ. .1 00* [2.54] .090 [2.29] .050 [1.27 ] M ax. Typ. N o. of D im ensions Post Plating/Part N os. Pos. AB Plating A Plating B 2 .08 4 [2.13] — 1-8 7 215-0 8 7 227 -1 4 .1 8 4 [4.6 7 ] .1 00 [2.54] 1-8 7 215-1 8 7 227 -2 6 .2 8 4 [7 .21] .2 00 [5.08 ] 1-8 7 215-2 8 7 227 -3 8 .38 4 [9.7 5] .300 [7 .6 2] 8 7 215-1 8 7 227 -4 10 .48 4 [12.29] .400 [10.16 ] 8 7 215-2 8 7 227 -5 12 .58 4 [14.8 3] .500 [12.7 0] 8 7 215-3 8 7 227 -6 14 .68 4 [17 .37 ] .600 [15.24] 8 7 215-4 8 7 227 -7 16 .78 4 [19.91] .700 [17 .7 8 ] 8 7 215-5 8 7 227 -8 18 .8 8 4 [22.45] .8 00 [20.32] 8 7 215-6 8 7 227 -9 20 .98 4 [24.99] .900 [22.8 6 ] 8 7 215-7 1-8 7 227 -0 22 1 .08 4 [27 .53] 1 .000 [25.40] 1-8 7 215-3 1-8 7 227 -1 24 1 .1 8 4 [30.07 ] 1 .1 00 [27 .94] 8 7 215-8 1-8 7 227 -2 26 1 .2 8 4 [32.6 1] 1 .2 00 [30.48 ] 8 7 215-9 1-8 7 227 -3 28 1 .38 4 [35.15] 1 .300 [33.02] 1-8 7 215-4 1-8 7 227 -4 30 1 .48 4 [37 .6 9] 1 .400 [35.56 ] 1-8 7 215-5 1-8 7 227 -5 32 1 .58 4 [40.23] 1 .500 [38 .10] 1-8 7 215-6 1-8 7 227 -6 34 1 .68 4 [42.7 7 ] 1 .600 [40.6 4] 1-8 7 215-7 1-8 7 227 -7 36 1 .78 4 [45.31] 1 .700 [43.18 ] 1-8 7 215-8 1-8 7 227 -8 38 1 .8 8 4 [47 .8 5] 1 .8 00 [45.7 2] 1-8 7 215-9 1-8 7 227 -9 40 1 .98 4 [50.39] 1 .900 [48 .26 ] 2-8 7 215-0 2-8 7 227 -0

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard H eaders— Unshrouded, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Unshrouded Headers N o. of D im ensions Post Plating/Part N os. Pos. AB Plating A Plating B 42 2 .08 4 [52.93] 2 .000 [50.8 0] 2-8 7 215-1 2-8 7 227 -1 44 2 .1 8 4 [55.47 ] 2 .1 00 [53.34] 2-8 7 215-2 2-8 7 227 -2 46 2 .2 8 4 [58 .01] 2 .2 00 [55.8 8 ] 2-8 7 215-3 2-8 7 227 -3 48 2 .38 4 [6 0.55] 2 .300 [58 .42] 2-8 7 215-4 2-8 7 227 -4 50 2 .48 4 [6 3.09] 2 .400 [6 0.96 ] 2-8 7 215-5 2-8 7 227 -5 52 2 .58 4 [6 5.6 3] 2 .500 [6 3.50] 2-8 7 215-6 2-8 7 227 -6 54 2 .68 4 [6 8 .17 ] 2 .600 [6 6 .04] 2-8 7 215-7 2-8 7 227 -7 56 2 .78 4 [7 0.7 1] 2 .700 [6 8 .58 ] 2-8 7 215-8 2-8 7 227 -8 58 2 .8 8 4 [7 3.25] 2 .8 00 [7 1.12] 2-8 7 215-9 2-8 7 227 -9 6 0 2 .98 4 [7 5.7 9] 2 .900 [7 3.6 6 ] 3-8 7 215-0 3-8 7 227 -0 6 2 3.08 4 [7 8 .33] 3.000 [7 6 .20] 3-8 7 215-1 3-8 7 227 -1 6 4 3.1 8 4 [8 0.8 7 ] 3.1 00 [7 8 .7 4] 3-8 7 215-2 3-8 7 227 -2 6 6 3.2 8 4 [8 3.41] 3.2 00 [8 1.28 ] 3-8 7 215-3 3-8 7 227 -3 6 8 3.38 4 [8 5.95] 3.300 [8 3.8 2] 3-8 7 215-4 3-8 7 227 -4 7 0 3.48 4 [8 8 .49] 3.400 [8 6 .36 ] 3-8 7 215-5 3-8 7 227 -5 7 2 3.58 4 [91.03] 3.500 [8 8 .90] 3-8 7 215-6 3-8 7 227 -6 7 4 3.68 4 [93.57 ] 3.600 [91.44] 3-8 7 215-7 3-8 7 227 -7 7 6 3.78 4 [96 .11] 3.700 [93.98 ] 3-8 7 215-8 3-8 7 227 -8 7 8 3.8 8 4 [98 .6 5] 3.8 00 [96 .52] 3-8 7 215-9 3-8 7 227 -9 8 0 3.98 4 [101.19] 3.900 [99.06 ] 4-8 7 215-0 4-8 7 227 -0

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard H eaders— Unshrouded, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Unshrouded H eaders B .042 [1.07 ] Typ. .0 2 5 [0 .64] Square R ight-Angle Post M aterial and Finish H ousing — B lack therm oplastic, Posts — C opper alloy, plated as follow s: Plating A — S electively plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire post Plating B — S electively plated .00 0 0 1 5 [0 .0 0 0 38] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire post Tin/N ickel — P lating option available; m inim um order quantities m ay apply. C onsult T E . R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. B .1 00* [2.54] .035±.003 [0.8 9±0.08 ] D ia. Typ. Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. N o. of D im ensions Post Plating/Part N os. Pos. AB Plating A Plating B 2 .08 4 [2.13] — 1-8 6 47 9-3 8 7 230-1 4 .1 8 4 [4.6 7 ] .1 00 [2.54] 1-8 6 47 9-4 8 7 230-2 6 .2 8 4 [7 .21] .2 00 [5.08 ] 1-8 6 47 9-5 8 7 230-3 8 .38 4 [9.7 5] .300 [7 .6 2] 1-8 6 47 9-6 8 7 230-4 10 .48 4 [12.29] .400 [10.16 ] 8 6 47 9-3 8 7 230-5 12 .58 4 [14.8 3] .500 [12.7 0] 8 6 47 9-4 8 7 230-6 14 .68 4 [17 .37 ] .600 [15.24] 8 6 47 9-5 8 7 230-7 16 .78 4 [19.91] .700 [17 .7 8 ] 8 6 47 9-2 8 7 230-8 18 .8 8 4 [22.45] .8 00 [20.32] 8 6 47 9-6 8 7 230-9 20 .98 4 [24.99] .900 [22.8 6 ] 8 6 47 9-1 1-8 7 230-0 22 1 .08 4 [27 .53] 1 .000 [25.40] 1-8 6 47 9-7 1-8 7 230-1 24 1 .1 8 4 [30.07 ] 1 .1 00 [27 .94] 8 6 47 9-7 1-8 7 230-2 26 1 .2 8 4 [32.6 1] 1 .2 00 [30.48 ] 1-8 6 47 9-0 1-8 7 230-3 28 1 .38 4 [35.15] 1 .300 [33.02] 1-8 6 47 9-8 1-8 7 230-4 30 1 .48 4 [37 .6 9] 1 .400 [35.56 ] 1-8 6 47 9-9 1-8 7 230-5 32 1 .58 4 [40.23] 1 .500 [38 .10] 2-8 6 47 9-0 1-8 7 230-6 34 1 .68 4 [42.7 7 ] 1 .600 [40.6 4] 2-8 6 47 9-1 1-8 7 230-7 36 1 .78 4 [45.31] 1 .700 [43.18 ] 2-8 6 47 9-2 1-8 7 230-8 38 1 .8 8 4 [47 .8 5] 1 .8 00 [45.7 2] 2-8 6 47 9-3 1-8 7 230-9 40 1 .98 4 [50.39] 1 .900 [48 .26 ] 2-8 6 47 9-4 2-8 7 230-0 .1 00 [2.54] Typ. .31 8 [8 .08 ] .1 57 [3.99] A .2 00 [5.08 ] R ef. (C ontact A rea) .1 00 [2.54] .1 00 [2.54] .1 1 0 [2.7 9] .042 [1.07 ] .1 00* [2.54] .069 [1.7 5] .2 8 9 [7 .34]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard H eaders— Unshrouded, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Unshrouded Headers N o. of D im ensions Post Plating/Part N os. Pos. AB Plating A Plating B 42 2 .08 4 [52.93] 2 .000 [50.8 0] 2-8 6 47 9-5 2-8 7 230-1 44 2 .1 8 4 [55.47 ] 2 .1 00 [53.34] 2-8 6 47 9-6 2-8 7 230-2 46 2 .2 8 4 [58 .01] 2 .2 00 [55.8 8 ] 2-8 6 47 9-7 2-8 7 230-3 48 2 .38 4 [6 0.55] 2 .300 [58 .42] 2-8 6 47 9-8 2-8 7 230-4 50 2 .48 4 [6 3.09] 2 .400 [6 0.96 ] 2-8 6 47 9-9 2-8 7 230-5 52 2 .58 4 [6 5.6 3] 2 .500 [6 3.50] 3-8 6 47 9-0 2-8 7 230-6 54 2 .68 4 [6 8 .17 ] 2 .600 [6 6 .04] 3-8 6 47 9-1 2-8 7 230-7 56 2 .78 4 [7 0.7 1] 2 .700 [6 8 .58 ] 3-8 6 47 9-2 2-8 7 230-8 58 2 .8 8 4 [7 3.25] 2 .8 00 [7 1.12] 3-8 6 47 9-3 2-8 7 230-9 6 0 2 .98 4 [7 5.7 9] 2 .900 [7 3.6 6 ] 3-8 6 47 9-4 3-8 7 230-0 6 2 3.08 4 [7 8 .33] 3.000 [7 6 .20] 3-8 6 47 9-5 3-8 7 230-1 6 4 3.1 8 4 [8 0.8 7 ] 3.1 00 [7 8 .7 4] 3-8 6 47 9-6 3-8 7 230-2 6 6 3.2 8 4 [8 3.41] 3.2 00 [8 1.28 ] 3-8 6 47 9-7 3-8 7 230-3 6 8 3.38 4 [8 5.95] 3.300 [8 3.8 2] 3-8 6 47 9-8 3-8 7 230-4 7 0 3.48 4 [8 8 .49] 3.400 [8 6 .36 ] 3-8 6 47 9-9 3-8 7 230-5 7 2 3.58 4 [91.03] 3.500 [8 8 .90] 4-8 6 47 9-0 3-8 7 230-6 7 4 3.68 4 [93.57 ] 3.600 [91.44] 4-8 6 47 9-1 3-8 7 230-7 7 6 3.78 4 [96 .11] 3.700 [93.98 ] 4-8 6 47 9-2 3-8 7 230-8 7 8 3.8 8 4 [98 .6 5] 3.8 00 [96 .52] 4-8 6 47 9-3 3-8 7 230-9 8 0 3.98 4 [101.19] 3.900 [99.06 ] 4-8 6 47 9-4 4-8 7 230-0

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard H eaders— Unshrouded, Triple-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Unshrouded H eaders B A .042 [1.07 ] Typ. .0 2 5 [0 .64] Square Straight Post M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, duplex plated 0 0 0 0 30 [0 .0 0 0 76] gold on contact area, .0 0 0 1 0 0 -.0 0 02 00 [0.0 0 2 54 -0 .0 0 50 8] tin on solder area, w ith entire post underplated .000050 [0.001 2 7] nickel Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. B .1 00* [2.54] .035±.003 [0.8 9±0.08 ] D ia. Typ. Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. N o. of D im ensions Part N os. Pos. AB 9 .2 8 4 [7 .21] .2 00 [5.08 ] 5-1038 17 -1 12 .38 4 [9.7 5] .300 [7 .6 2] 5-1038 17 -2 15 .48 4 [12.29] .400 [10.16 ] 5-1038 17 -3 18 .58 4 [14.8 3] .500 [12.7 0] 5-1038 17 -4 21 .68 4 [17 .37 ] .600 [15.24] 5-1038 17 -5 24 .78 4 [19.91] .700 [17 .7 8 ] 5-1038 17 -6 27 .8 8 4 [22.45] .8 00 [20.32] 5-1038 17 -7 30 .98 4 [24.99] .900 [22.8 6 ] 5-1038 17 -8 33 1 .08 4 [27 .53] 1 .000 [25.40] 5- 1038 17 -9 42 1 .38 4 [35.15] 1 .300 [33.02] 6 -1038 17 -2 45 1 .48 4 [37 .6 9] 1 .400 [35.56 ] 6 -1038 17 -3 6 0 1 .98 4 [50.39] 1 .900 [48 .26 ] 6 -1038 17 -8 6 9 2 .2 8 4 [58 .01] 2 .2 00 [55.8 8 ] 7 -1038 17 -1 7 2 2 .38 4 [6 0.55] 2 .300 [58 .42] 7 -1038 17 -2 96 3.1 8 4 [8 0.8 7 ] 3.1 00 [7 8 .7 4] 8 -1038 17 -0 120 3.98 4 [101.19] 3.900 [99.06 ] 8 -1038 17 -8 .1 00 [2.54] Typ. .1 2 0 [3.05] .1 8 5 [4.7 0] R ef. (C ontact A rea) .2 30 [5.8 4] .338 [8 .59] .1 00* [2.54] .1 2 0 [3.05] .1 00 [2.54] Typ. .1 00* [2.54] .069 [1.7 5] Typ.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System B reakaw ay and R etention H eaders— Unshrouded Breakaway and Retention Headers—Unshrouded Product Facts I D esign and inventory versatility— headers can be broken into any size needed I Variety of popular sizes available I Substantial tim e/labor savings can install all posts at one tim e I Vertical and right-angle versions available in single- and double-row configurations I Phosphor bronze posts I C hoice of gold duplex or tin plated posts I Post lengths include .2 30 connector m ating I B oard retention feature available I B lack, glass-filled therm oplastic housings; high tem perature com patible I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 Perform ance C haracteristics E lectrical Insulation R esistance — 5,0 0 0 m egohm s m inim um initial D ielectric W ithstanding Voltage — Operating Tem perature — -65°C to + 1 05°C (black therm oplastic housings) C urrent — 3 am peres m axim um per contact (dependent upon m ating receptacle) R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System B reakaw ay H eaders— Unshrouded, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. B reakaw ay and R etention H eaders-Unshrouded *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. H eaders w ith Solder Tails M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated, high tem perature com patible Posts — Phosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.00076] gold on contact area, .0001 00- .0002 00 [0.002 54 -0.00508] tin on solder tail, w ith entire post underplated .000050 [0.001 2 7] nickel Plating B — D uplex plated .00001 5 [0.00038] gold on contact area, .0001 00- .0002 00 [0.002 54 -0.00508] tin on solder tail, w ith entire post underplated .000050 [0.001 2 7] nickel Plating C — .0001 00-.0002 00 [0.002 54 -0.00508] tin over .000050 [0.001 2 7] nickel Perform ance C haracteristics (B oard R etention Tails) Insertion Force — 1 2 lb [53.4 N] m ax. R etention Force — .2 5 lb [1 .1 1 N] m in. R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. .0 2 5 [0 .64] Square Straight Posts A B E R ef. (C ontact A rea) B .02 5 [0.6 4] Typ. .045 [1.14] Typ. .090±.002 [2.29±0.05] D C .090 [2.29] Style Pos. AB Post Plating/Part N os. Post Plating/Part N os. Post Plating/Part N os. Plating A Plating B Plating C Plating A Plating B Plating C Plating A Plating B Plating C W ith — 5-146 28 5-1 5-146 28 4-1 5-146 28 2-1 5-146 28 1-1 5-146 28 0-1 5-146 27 8 -1 5-146 27 7 -1 5-146 27 6 -1 5-146 27 4-1 S older Tails 1 .08 4 [2.13] W ith B oard 5-146 297 -3 5-146 296 -3 5-146 294-3 5-146 293-3 5-146 292-3 5-146 290-3 5-146 28 9-3 5-146 28 8 -3 5-146 28 6 -3 R etention Tails 3 .2 8 4 [7 .21] .2 00 [5.08 ] N otes: 1. H eaders w ithout retention tails m ay be broken to the desired num ber of positions using Tool K it N o. 31 48 1 8 -1 (not show n) . 2. H eaders are also available in sizes 2 thru 39 positions (w ith S older Tails) and 4 thru 39 positions (w ith B oard R etention Tails). W hen ordering, add the prefix and/or suffix (dash) num bers plus 5- -0 to the base part num ber that corresponds w ith the desired size. For exam ple, the com plete part num ber for an 8 -position header w ith solder tails (C dim ension be 7 -146 292-6 . This part num bering system applies only to this page. H eaders w ith a C dim ension of .090 [2.29] have sw aged tails for all sizes. .030±.002 [0.7 6 ±0.05] .035±.003 [0.8 9±0.08 ] D ia. Typ. (P lated) R ecom m ended H ole S ize B efore P lating .045±.001 [1.14±0.02] D ia. Typ. Recom m ended PC Board M ounting Pattern (for .062 [1 .57] thick PC board; .008 [.2 03] thick stencil) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. A B E R ef. (C ontact A rea) B .02 5 [0.6 4] Typ. .045 [1.14] Typ. .1 50±.002 [3.8 1±0.05] D C (see note 3) .090 [2.29] .030±.002 [0.7 6 ±0.05] .040±.003 [1.02±0.08 ] D ia. Typ. (P lated) R ecom m ended H ole S ize B efore P lating .045±.001 [1.14±0.02] D ia. Typ. Recom m ended PC Board M ounting Pattern (for .062 [1 .57] thick PC board; .008 [.2 03] thick stencil) H eaders w ith B oard R etention Tails .1 00* [2.54] .1 00* [2.54]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System B reakaw ay H eaders— Unshrouded, Single-R ow , .10 0 [2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Breakaway and Retention Headers-Unshrouded A D C E R ef. (C ontact A rea) .1 00* [2.54] B .1 38 [3.51] .042 [1.07 ] (2 P lc.) .090 [2.29] M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated, high tem perature com patible Posts — Phosphor bronze, duplex plated .0 0 0 0 30 [0.00076] gold on con - tact area, .0001 00- .0 0 0 2 0 0 [0.002 54 - 0.0 0 50 8] m atte tin on solder tail, w ith entire post underplated .000050 [0.0 0 1 2 7] nickel Perform ance C haracteristics (B oard R etention Tails) Insertion Force — 1 2 lb [53.4 N] m ax. R etention Force — .2 5 lb [1 .1 1 N] m in. R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. .0 2 5 [0 .64] Square R ight-Angle Posts .1 00 [2.54] Typ. .1 40 [3.56 ] *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. H eaders w ith Solder Tails Recom m ended PC Board M ounting Pattern (for .062 [1 .57] thick PC board; .008 [.2 03] thick stencil) H eaders w ith B oard R etention Tails .045 [1.14] Typ. .090±.002 [2.29±0.05] .030±.002 [0.7 6 ±0.05] .035±.003 [0.8 9±0.08 ] D ia. Typ. (P lated) R ecom m ended H ole S ize B efore P lating .045±.001 [1.14±0.02] D ia. Typ. D C .090 [2.29] .1 40 [3.56 ] E R ef. (C ontact A rea) A B .1 38 [3.51] .042 [1.07 ] (2 P lc.) .1 00 [2.54] Typ. .1 00* [2.54] .045 [1.14] Typ. .030±.002 [0.7 6 ±0.05] .040±.003 [1.02±0.08 ] D ia. Typ. (P lated) R ecom m ended H ole S ize B efore P lating .045±.001 [1.14±0.02] D ia. Typ. .1 50±.002 [3.8 1±0.05] *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. Recom m ended PC Board M ounting Pattern (for .062 [1 .57] thick PC board; .008 [.2 03] thick stencil) Part N os. Part N os. W ith — 5-146 304-1 5-146 305-1 S older Tails 1 .08 4 [2.13] W ith B oard — 5-146 306 -3 5-146 307 -3 R etention Tails 3 .08 4 [2.13] N otes: 1. H eaders w ithout retention tails m ay be broken to the desired num ber of positions using Tool K it N o. 31 48 1 8 -1 (not show n) . N otes: 2. H eaders are also available in sizes 2 thru 39 positions (w ith S older Tails) and 4 thru 39 positions (w ith B oard R etention Tails). W hen ordering, add the prefix and/or suffix (dash) num bers plus 5- -0 to the base part num ber that corresponds w ith the num ber of positions. For exam ple, the com plete part num ber for an 8 -position header w ith solder tails (C dim ension .120 [3.05)] w ould be 5-146 304-8 . The com plete part num ber for a 26 -position header w ith board retention tails (C dim ension .120 [3.05]) w ould be 7 -146 306 -6 . This part num bering system applies only to this page. Board Retention using Sw aged Tails (All H eader Sizes)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System B reakaw ay H eaders— Unshrouded, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. B reakaw ay and R etention H eaders-Unshrouded A .1 00* [2.54] B .02 5 [0.6 4] Typ. .090 [2.29] M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated, high tem perature com patible Posts — Phosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder tail, w ith entire post underplated .000050 [0.001 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder tail, w ith entire post underplated .000050 [0.001 2 7] nickel Plating C — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.001 2 7] nickel Perform ance C haracteristics (B oard R etention Tails) Insertion Force — 1 2 lb [53.4 N] m ax. R etention Force — .2 5 lb [1 .1 1 N] m in. R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. .0 2 5 [0 .64] Square Straight Posts .045 [1.14] R ef. .1 92 [4.8 8 ] .1 00 [2.54] .1 00 [2.54] E R ef. (C ontact A rea) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. H eaders w ith Solder Tails Recom m ended PC Board M ounting Pattern (for .062 [1 .57] thick PC board; .008 [.2 03] thick stencil) H eaders w ith B oard R etention Tails .090±.002 [2.29±0.05] .030±.002 [0.7 6 ±0.05] .035±.003 [0.8 9±0.08 ] D ia. Typ. (P lated) R ecom m ended H ole S ize B efore P lating .045±.001 [1.14±0.02] D ia. Typ. C D ( of H ole Pattern) CL .1 1 0 [2.7 9] ( of S tencil Pattern) CL A .1 00* [2.54] B .02 5 [0.6 4] Typ. .090 [2.29] .075 [1.91] R ef. .1 92 [4.8 8 ] .1 00 [2.54] E R ef. (C ontact A rea) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. Recom m ended PC Board M ounting Pattern (for .062 [1 .57] thick PC board; .008 [.2 03] thick stencil) .1 50±.002 [3.8 1±0.05] .030±.002 [0.7 6 ±0.05] .040±.003 [1.02±0.08 ] D ia. Typ. (P lated) R ecom m ended H ole S ize B efore P lating .045±.001 [1.14±0.02] D ia. Typ. C D ( of H ole Pattern) CL .1 70 [4.32] ( of S tencil Pattern) CL Style Pos. AB Post Plating/Part N os. Post Plating/Part N os. Post Plating/Part N os. Plating A Plating B Plating C Plating A Plating B Plating C Plating A Plating B Plating C W ith — 5-146 26 1-1 5-146 26 0-1 5-146 258 -1 5-146 257 -1 5-146 256 -1 5-146 254-1 5-146 253-1 5-146 252-1 5-146 250-1 S older Tails 2 .08 4 [2.13] W ith B oard — 5-146 27 3-1 5-146 27 2-1 5-146 27 0-1 5-146 26 9-1 5-146 26 8 -1 5-146 26 6 -1 5-146 26 5-1 5-146 26 4-1 5-146 26 2-1 R etention Tails 2 .08 4 [2.13] N otes: 1. H eaders w ithout retention tails m ay be broken to the desired num ber of positions using Tool K it N o. 31 48 1 8 -1 (not show n) . 2. H eaders are also available in sizes 4 thru 7 8 positions. W hen ordering, add the prefix and/or suffix (dash) num bers plus 5- -0 to the base part num ber that corresponds w ith the num ber of positions per row. For exam ple, the com plete part num ber for a 16 -position header w ith solder tails (C dim ension .090 [2.29], post plating A ) w ould be 5-146 26 1-8 . The com plete part num ber for a 40-position header w ith board retention tails (C dim ension .120 [3.05], post plating B ) w ould be 7 -146 26 8 -0. This part num bering system applies only to this page.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System B reakaw ay H eaders— Unshrouded, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Breakaway and Retention Headers-Unshrouded .0 2 5 [0 .64] Square R ight-Angle Posts A D E R ef. (C ontact A rea) .1 00 [2.54] B .2 38 [6 .05] .042 [1.07 ] (2 P lc.) .090 [2.29] M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated, high tem perature com patible Posts — Phosphor bronze, duplex plated .0 0 0 0 30 [0.00076] gold on contact area, .0001 00- .0 002 00 [0.0 0 2 54 -0 .0 0 50 8] tin on solder tail, w ith entire post underplated .000050 [0.0 0 1 2 7] nickel Perform ance C haracteristics (B oard R etention Tails) Insertion Force — 1 2 lb [53.4 N] m ax. R etention Force — .2 5 lb [1 .1 1 N] m in. R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. .1 00 [2.54] Typ. .1 40 [3.56 ] *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. H eaders w ith Solder Tails Recom m ended PC Board M ounting Pattern (for .062 [1 .57] thick PC board; .008 [.2 03] thick stencil) H eaders w ith B oard R etention Tails .045 [1.14] R ef. .090±.002 [0.7 6 ±0.05] .035±.003 [0.8 9±0.08 ] D ia. Typ. (P lated) R ecom m ended H ole S ize B efore P lating .045±.001 [1.14±0.02] D ia. Typ. D .090 [2.29] .1 40 [3.56 ] E R ef. (C ontact A rea) A B .2 38 [6 .05] .042 [1.07 ] (2 P lc.) .1 00* [2.54] .075 [1.91] Typ. .030±.002 [0.7 6 ±0.05] .040±.003 [1.02±0.08 ] D ia. Typ. (P lated) R ecom m ended H ole S ize B efore P lating .045±.001 [1.14±0.02] D ia. Typ. .1 50±.002 [3.8 1±0.05] *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. Recom m ended PC Board M ounting Pattern (for .062 [1 .57] thick PC board; .008 [.2 03] thick stencil) Part N os. Part N os. W ith — 5-146 308 -1 5-146 309-1 S older Tails 2 .08 4 [2.13] W ith B oard — 5-146 310-1 5-146 311-1 R etention Tails 2 .08 4 [2.13] N otes: 1. H eaders w ithout retention tails m ay be broken to the desired num ber of positions using Tool K it N o. 31 48 1 8 -1 (not show n) . N otes: 2. H eaders are also available in sizes 4 thru 7 8 positions. W hen ordering, add the prefix and/or suffix (dash) num bers plus 5- -0 to the base part num ber that corresponds w ith the num ber of positions per row. For exam ple, the com plete part num ber for a 16 - position header w ith solder tails (C dim ension .120 [3.05)] w ould be 5-146 308 -8 . The com plete part num ber for a 40-position header w ith board retention tails (C dim ension .120 [3.05]) w ould be 7 -146 310-0. This part num bering system applies only to this page. Board Retention using Sw aged Tails (All H eader Sizes) .1 00 [2.54] .1 00* [2.54] .1 00 [2.54] .1 1 0 [2.7 9] ( of S tencil Pattern) CL ( of H ole Pattern) CL .1 00 [2.54] .1 00 [2.54] ( of H ole Pattern) CL .1 70 [4.32] ( of S tencil Pattern) CL .1 00 [2.54] C C

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM OD U R eeled B reakaw ay H eaders R eeled B reakaw ay H eaders TE now offers A M PM O D U reeled breakaw ay headers, w hich are used for board- to-board interconnections, on a continuous reel. The reeled breakaw ay headers are an econom y version of the standard breakaw ay headers, and continue to provide the sam e high quality standards that TE is know n for in the connector industry. Reeled breakaw ay headers provide the flexibility to cut the headers to m any different lengths, w hile only having to stock one part num ber. A s a result, the am ount of part num bers that need to be purchased and stored can be greatly reduced. Reeled breakaw ay headers can be purchased in single and double row s w ith tin,

5 A u, 1 5 A u, and 3 0 A u

duplex plating. The low er applied cost also offers .23 0 " and .3 1 8" m ating lengths. (See standard breakaw ay-to-reeled header conversion chart for vertical headers on the reverse side of this sheet) Potential industries include: com puter peripherals, telecom m unications equipm ent, consum er, autom otive, m edical and test equipm ent. Tooling available from : Robo-Pak, Inc. 81 4 Lakeshore D rive E ast B ethel, M N 5590 2 A pin retention and pin rem oval tooling option is also available in addition to cutting. Features of B reakaw ay H eaders I D esign and inventory versatility — headers can easily be m ade into a variety of sizes I H igh Tem perature C om patible I R educed part num ber base I R educed inventory burden I D esktops & w orkstations I Set-top boxes I Televisions I Autom otive instrum ent panels & radios I M edical and test equipm ent B enefits I Off the shelf availability I Various header length capability using the sam e reel I R eduction of inventory costs I E conom y version of the standard breakaw ay headers AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U R eeled B reakaw ay H eaders (Continued) N ote: A ll part num bers are R oH S com pliant. Reeled Breakaway Headers Standard Breakaw ay-to-Reeled H eader Conversion Chart (Vertical) D ouble Row H eaders Single Row H eaders Existing M ake F rom Existing M ake F rom Existing M ake F rom Existing M ake F rom TE P/N Reeled P/N TE P/N Reeled P/N TE P/N Reeled P/N TE P/N Reeled P/N 103322 103328 103321 103327 Tin 5-146 8 53-1 5-146 8 51-1 5-146 8 52-1 5-146 8 50-1 146 250 146 254 146 27 4 146 27 8 10297 3 10318 6 10297 2 10318 5

15 A u D uplex 5-146 8 6 1-1 5-146 8 59-1 5-146 8 6 0-1 5-146 8 58 -1

146 252 146 256 146 27 6 146 28 0 10297 7 103240 10297 6 103239

30 A u D uplex 5-146 8 7 1-1 5-146 8 6 9-1 5-146 8 7 0-1 5-146 8 6 8 -1

146 253 146 257 146 27 7 146 28 1 N ote: R eeled H eaders are a functional substitute for standard breakaw ays, how ever there are visual differences (i.e. housing appearance and bow due to reeling requirem ent). .1 00 [2.54] .1 00 [2.54] .1 00±.003 [2.54±0.08 ] .02 5±.002 (1) [2.7 9±0.38 ] .046±.003 [1.17 ±0.08 ] .2 30 (1) [5.8 4] .1 8 5 [4.7 0] (C ontact A rea) .02 5±.001 [0.6 4±0.03] Typ. .1 92 [4.8 8 ] 3.900 [99.06 ] .1 00 [2.54] .1 00±.003 [2.54±0.08 ] .02 5±.002 (1) [2.7 9±0.38 ] .046±.003 [1.17 ±0.08 ] .2 30 (1) [5.8 4] .1 8 5 [4.7 0] (C ontact A rea) .02 5±.001 [0.6 4±0.03] Typ. .092 [2.34] 3.900 [99.06 ] (1) S ee table for other m ate and tail lengths. Single R ow D ouble R ow

130 7819 D im ensions are in inches and D im ensions are show n for U SA: 1-80 0 -522-6752 G erm any: 49-6251-133-1999 CIS W R 0 8/20 11 m illim eters unless otherw ise reference purposes only. Canada: 1-90 5-475-6222 China: 86-40 0 -820 -60 15 specified. Values in brackets Specifications subject M exico: 52-55-110 6-0 80 0 Japan: 81-44-844-80 13 AM PM O D U Interconnection System Breakaw ay Surface M ount H eaders, .100 x .100 [2.54 x 2.54] Centerline Product Facts I Surface M ount Leads I Contact M aterial: phosphor bronze I H igh tem perature, black therm oplastic housings, 94V-0 rated, capable of w ithstanding IR or vapor- phase reflow I R ecognized under the Com ponent Program of U nderw riters Laboratories Inc. File N o. E28476 I Certified by Canadian Standards Association, File N o. LR 7189 I Choice of gold duplex or tin plated posts I Posts coplanar w ithin .006 [0.15] I Tape and reel packaging available in addition to single tube packaging. Contact TE . I Pick-and-place cap avail - able for vacuum placem ent. Contact TE. An extension of the AM PM O D U Breakaw ay H eader product fam ily are the surface m ount, vertical breakaw ay headers. The AM PM O D U Surface M ount breakaw ay headers (U nshrouded) are available in single- and double-row vertical configurations w ith m ating lengths of .230 [5.84] and .320 [8.13]. Posts are offered w ith a choice of either .000030 [.0007] gold duplex or tin plating. C urrent packaging is in a single tube but tape and reel is available for autom atic pick-and-place. W e also can provide a pick- and-place cap for vacuum placem ent if required. R R Surface M ount Breakaw ay H eaders

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Surface Mount Breakaway Headers B reakaw ay Surface M ount H eaders— Unshrouded Single-R ow , .10 0 [2 .54] C enterline .0 2 5 [0 .64] Square Straight Post M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating B — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel entire post R elated Product D ata M ateable R eceptacle — R efer to M ating P ost S election G uide — page 90 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. Pos. D im ensions Post Plating/Part N os. Post Plating/Part N os. AB Plating A Plating B Plating A Plating B 3 .2 8 4 [7 .21] .2 00 [5.08 ] 5-146 128 -1 5-146 132-1 5-146 129-1 5-146 133-1 4 .38 4 [9.7 5] .300 [7 .6 2] 5-146 128 -2 5-146 132-2 5-146 129-2 5-146 133-2 5 .48 4 [12.29] .400 [10.16 ] 5-146 128 -3 5-146 132-3 5-146 129-3 5-146 133-3 6 .58 4 [14.8 3] .500 [12.7 0] 5-146 128 -4 5-146 132-4 5-146 129-4 5-146 133-4 7 .68 4 [17 .37 ] .600 [15.24] 5-146 128 -5 5-146 132-5 5-146 129-5 5-146 133-5 8 .78 4 [19.91] .700 [17 .7 8 ] 5-146 128 -6 5-146 132-6 5-146 129-6 5-146 133-6 9 .8 8 4 [22.45] .8 00 [20.32] 5-146 128 -7 5-146 132-7 5-146 129-7 5-146 133-7 10 .98 4 [24.99] .900 [22.8 6 ] 5-146 128 -8 5-146 132-8 5-146 129-8 5-146 133-8 11 1 .08 4 [27 .53] 1 .000 [25.40] 5-146 128 -9 5-146 132-9 5-146 129-9 5-146 133-9 12 1 .1 8 4 [30.07 ] 1 .1 00 [27 .94] 6 -146 128 -0 6 -146 132-0 6 -146 129-0 6 -146 133-0 13 1 .2 8 4 [32.6 1] 1 .2 00 [30.48 ] 6 -146 128 -1 6 -146 132-1 6 -146 129-1 6 -146 133-1 14 1 .38 4 [35.15] 1 .300 [33.02] 6 -146 128 -2 6 -146 132-2 6 -146 129-2 6 -146 133-2 15 1 .48 4 [37 .6 9] 1 .400 [35.56 ] 6 -146 128 -3 6 -146 132-3 6 -146 129-3 6 -146 133-3 A C D R ef. (C ontact A rea) B .092 [2.34] .042 [1.07 ] Typ. .02 5 [0.6 3] .1 05 [2.6 7 ] .2 45 [6 .22] .050±.003 [1.27 ±0.08 ] .090 [2.29] .050 [1.27 ] .1 92 [4.8 8 ] .1 00 [2.54] Typ. .1 00 [2.54] Typ. Recom m ended Etched Circuit Layout (U sing .008 [0.2 0] thick stencil) .1 40±.003 [3.56 ±0.08 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Surface M ount B reakaw ay H eaders B reakaw ay Surface M ount H eaders— Unshrouded D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline .0 2 5 [0 .64] Square Straight Post M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating B — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel entire post R elated Product D ata M ateable R eceptacles — R efer to M ating P ost S election G uide — page 90 Pos. D im ensions Post Plating/Part N os. Post Plating/Part N os. AB Plating A Plating B Plating A Plating B 4 .1 8 4 [4.6 7 ] .1 00 [2.54] 5-146 130-1 5-146 134-1 5-146 131-1 5-146 135-1 6 .2 8 4 [7 .21] .2 00 [5.08 ] 5-146 130-2 5-146 134-2 5-146 131-2 1-146 135-6 8 .38 4 [9.7 5] .300 [7 .6 2] 5-146 130-3 5-146 134-3 5-146 131-3 5-146 135-3 10 .48 4 [12.29] .400 [10.16 ] 5-146 130-4 1-146 134-7 5-146 131-4 5-146 135-4 12 .58 4 [14.8 3] .500 [12.7 0] 5-146 130-5 5-146 134-5 5-146 131-5 5-146 135-5 14 .68 4 [17 .37 ] .600 [15.24] 5-146 130-6 5-146 134-6 5-146 131-6 5-146 135-6 16 .78 4 [19.91] .700 [17 .7 8 ] 5-146 130-7 1-146 134-9 5-146 131-7 5-146 135-7 18 .8 8 4 [22.45] .8 00 [20.32] 5-146 130-8 5-146 134-8 5-146 131-8 5-146 135-8 20 .98 4 [24.99] .900 [22.8 6 ] 5-146 130-9 5-146 134-9 5-146 131-9 5-146 135-9 22 1 .08 4 [27 .53] 1 .000 [25.40] 6 -146 130-0 6 -146 134-0 6 -146 131-0 6 -146 135-0 24 1 .1 8 4 [30.07 ] 1 .1 00 [27 .94] 6 -146 130-1 6 -146 134-1 6 -146 131-1 6 -146 135-1 26 1 .2 8 4 [32.6 1] 1 .2 00 [30.48 ] 6 -146 130-2 6 -146 134-2 6 -146 131-2 6 -146 135-2 28 1 .38 4 [35.15] 1 .300 [33.02] 6 -146 130-3 6 -146 134-3 6 -146 131-3 6 -146 135-3 30 1 .48 4 [37 .6 9] 1 .400 [35.56 ] 6 -146 130-4 2-146 134-1 6 -146 131-4 6 -146 135-4 A C D R ef. (C ontact A rea) B B .042 [1.07 ] Typ. .02 5 [0.6 4] .1 00 [2.54] .090 [2.29] .345 [8 .7 6 ] .2 05 [5.21] .065 [1.6 5] .1 40±.003 [3.56 ±0.08 ] .050±.003 [1.27 ±0.08 ] .063 [1.6 0] .050 [1.27 ] .2 92 [7 .42] .1 92 [4.8 8 ] .1 00 [2.54] Typ. .1 00 [2.54] Typ. Recom m ended Etched Circuit Layout (U sing .008 [0.2 0] thick stencil)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Unshrouded Stacking Headers— Breakaway Unshrouded Stacking H eaders— B reakaw ay .10 0 x .10 0 [2 .54 x 2 .54] C enterline Product Facts I Available in single and double row I Parallel PC board stacking w ith num erous stack heights available I D raw n w ire posts allow 4 side m ateability I M ay elim inate the need for additional board spacers I C an be used in conjunction w ith bottom entry receptacles I Gold or tin plated I Up to 1.430 [36.32 ] overall post length I R etention and surface m ount features available upon request I Other header sizes can be m ade upon request I Tape and reel packaging available. C ontact TE . I Pick-and-place cap avail - able for vacuum placem ent. C ontact TE .

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System 1 1 2 N ote: A ll part num bers are R oH S com pliant. Unshrouded Stacking H eaders— B reakaw ay Unshrouded Stacking H eaders — B reakaw ay, Single-R ow , .10 0 [2 .54] C enterline M aterial and Finish H ousing — B lack therm oplastic, Posts — Phosphor bronze, plated as follow s: Plating — A s noted in chart: Tin — .0001 00-.0002 00 [0.002 54 - 0.00508] tin over .000050 [0.001 2 7] nickel entire post 15Au — .00001 5 [0.00038] gold over .000050 [0.001 2 7] nickel entire post R elated Product D ata M ateable R eceptacles — Refer to the M ating Post Selection G uide — page 88 Technical D ocum ents — page 2 76 See m ating connector for applicable product and application specifications. Retention and surface m ount fea - tures available upon request. O ther header sizes can be m ade upon request. .0 2 5 [0 .64] Square Straight Posts .092 [2.34] B .02 5±.001 [0.6 4±0.03] Typ. Recom m ended PC Board H ole Layout Base ABCD B End D End N um ber Stack Tail Post M ating Plating Plating (see note) H eight Length Length Length D .1 00±.003 [2.54±0.08 ] Typ. Tolerance N on-C um ulative .042 ±.008 [1.07 ±0.20]

4 P laces

.090±.003 [2.29±0.08 ] H eader S ize N o. of Pos. x .1 00 [2.54] .046±.003 [1.17 ±0.08 ] A C .035±.003 [0.8 9±0.08 ] D ia. Typ. *N ote: H eaders are available in sizes 1 thru 40. W hen ordering, add the prefix and/or suffix (dash) num bers plus 5- -0 to the base part num ber that corresponds w ith the num ber of positions per row. For exam ple, the com plete part num ber for an 8 -position header is 5-146 455-8 . The com plete part num ber for a 16 -position of the sam e series w ould be 6 -146 455-6 .

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Unshrouded Stacking Headers— Breakaway Unshrouded Stacking H eaders — B reakaw ay, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline M aterial and Finish H ousing — B lack therm oplastic, Posts — Phosphor bronze, plated as follow s: Plating — A s noted in chart: Tin — .0001 00-.0002 00 [0.002 54 - 0.00508] tin over .000050 [0.001 2 7] nickel entire post 15Au — .00001 5 [0.00038] gold over .000050 [0.001 2 7] nickel entire post R elated Product D ata M ateable C onnectors — Refer to the M ating Post Selection G uide — page 90 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. Retention and surface m ount features available upon request. O ther header sizes can be m ade upon request. .0 2 5 [0 .64] Square Straight Posts Recom m ended PC Board H ole Layout Base ABCD B End D End N um ber Stack Tail Post M ating Plating Plating (see note) H eight Length Length Length .1 92 [4.8 8 ] .1 00 [2.54] B .02 5±.001 [0.6 4±0.03] Typ. D .1 00±.003 [2.54±0.08 ] Typ. Tolerance N on-C um ulative .042 ±.008 [1.07 ±0.20] .090±.003 [2.29±0.08 ] .1 00±.003 [2.54±0.08 ] .046±.003 [1.17 ±0.08 ] A C .035±.003 [0.8 9±0.08 ] D ia. Typ. H eader S ize N o. of Pos. x .1 00 [2.54] *N ote: H eaders are available in sizes 2 thru 8 0. W hen ordering, add the prefix and/or suffix (dash) num bers plus 5- -0 to the base part num ber that corresponds w ith the num ber of positions per row. For exam ple, the com plete part num ber for a 16 -position header is 5-146 28 3-8 . The com plete part num ber for a 32-position of the sam e series w ould be 6 -146 28 3-6 .

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard Profile H eaders, Shrouded Standard Profile H eaders— Shrouded Product Facts I Available in several styles— right-angle w ith three- and four-sided pin protection, and straight post w ith pin protection and m ounting ears I Post retention feature available I C an be used for feed-to and feed-thru applications I H ousings are black therm oplastic, flam e retardant 94V-0 rated I C ontacts are copper alloy I Available in gold duplex, gold over nickel and tin over nickel platings I H eaders w ith .0 66 [1.68] and .150 [3.81] end dim en - sions are available in select sizes up to 60 positions I C an be select loaded, consult TE I R ecognized under the C om ponent Program of Underw riters Laboratories Inc. File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 Perform ance C haracteristics E lectrical Insulation R esistance — 5,0 0 0 m egohm s m inim um initial D ielectric W ithstanding Voltage —

750 R M S at sea level

Operating Tem perature — -65°C to + 1 05°C (black therm oplastic housings) C urrent — 3 am peres m axim um per contact R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile Headers, Shrouded Standard Profile H eaders— Shrouded, Single-R ow , .10 0 [2 .54] C enterline N o. of D im ensions Post Plating/Part N os. Pos. AB C Plating A Plating B Plating C M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post under - plated .0 0 0 0 50 [0 .0 0 1 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post under - plated .0 0 0 0 50 [0 .0 0 1 2 7] nickel Plating C — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel on entire post R elated Product D ata M ateable C onnectors — AM PM OD U W ire-Applied R eceptacles — page 2 1 5 AM PM OD U M TE R eceptacles — pages 2 2 8, 2 2 9, 2 34 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .1 00* [2.54] Typ. .035±.003 [0.8 9±0.08 ] D ia. Typ. B .549 [13.94] .1 1 0 [2.7 9] Typ. Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square Straight Post (w ith Standoffs) A C .2 1 4 [5.44] .1 00 [2.54] Typ. .1 34 [3.40] .01 3 [0.33] (S tandoffs) .070 [1.7 8 ] Typ. .040 [1.02] Typ. .2 1 9 [5.56 ] .2 00 [5.08 ] R ef. (C ontact A rea) .1 30 [3.30] .2 40 [6 .10] .330 [8 .38 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile H eaders, Shrouded N o. of D im ensions Post Plating/Part N os. Pos. ABC Plating A Plating B Plating C M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating C — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel on entire post R elated Product D ata M ateable C onnectors — AM PM OD U W ire-Applied R eceptacles — page 2 1 5 AM PM OD U M TE R eceptacles — pages 2 2 8, 2 2 9, 2 34 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .1 00* [2.54] Typ. .035±.003 B .549 [13.94] .1 1 0 [2.7 9] .330 [8 .38 ] Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square R ight-Angle Post (w ith Standoffs) A C .2 1 4 [5.44] .1 00 [2.54] Typ. .1 34 [3.40] .01 3 [0.33] (S tandoffs) .070 [1.7 8 ] Typ. .040 [1.02] Typ. .2 1 9 [5.56 ] .2 00 [5.08 ] R ef. (C ontact A rea) .1 51 [3.8 4] .2 40 [6 .10] Standard Profile H eaders— Shrouded, Single-R ow , .10 0 [2 .54] C enterline (Continued)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile Headers, Shrouded Standard Profile H eaders— Shrouded, w ith .0 66 [1.68] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating C — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel on entire post R elated Product D ata M ateable C onnectors — AM PM OD U B oard M ount R eceptacles — pages 1 76, 1 79, 1 80 AM PM OD U W ire-Applied R eceptacles — pages 2 1 6-2 1 9 AM PM OD U M TE R eceptacles — pages 2 2 8, 2 2 9, 2 34 AM PM OD U M T R eceptacles — pages 2 56, 2 57 Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .1 00* [2.54] .035±.003 [0.8 9±0.08 ] D ia. Typ. A .2 40 [6 .10] Typ. .090 [2.29] .08 0 [2.03] Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square Straight Post (w ith D etent W indow s) B C .400 [10.16 ] .1 00 [2.54] Typ. .066 [1.6 8 ] (2 P lc.) .1 2 5 [3.18 ] .2 00 [5.08 ] R ef. (C ontact A rea) .31 8 [8 .08 ] D E .090 [2.29] (2 P lc.) .1 00 [2.54] .040 [1.02] (3 P lc.) .1 00* [2.54] Typ. .440 [11.18 ] .2 8 0 [7 .11] N o. of D im ensions Post Plating/Part N os. Pos. AB C D E Plating A Plating B Plating C

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard Profile H eaders, Shrouded Standard Profile H eaders— Shrouded, w ith .0 66 [1.68] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N o. of D im ensions Post Plating/Part N os. Positions A BC D E Plating A Plating B Plating C

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile Headers, Shrouded Standard Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating C — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel on entire post R elated Product D ata M ateable C onnectors AM PM OD U M TE R eceptacles — pages 2 32 , 2 33, 2 35 (used w ith coupling shroud on page 2 4 1 ) AM PM OD U W ire-Applied R eceptacles — pages 2 1 6-2 1 9 Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .1 00* [2.54] .035±.003 [0.8 9 ±0.08 ]D ia. Typ. A .2 40 [6 .10] Typ. .090 [2.29] .08 0 [2.03] Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square Straight Post (w ith D etent W indow s) B .400 [10.16 ] .1 00 [2.54] Typ. .1 50 [3.8 1] (2 P lc.) .1 2 5 [3.18 ] .2 00 [5.08 ] R ef. (C ontact A rea) .31 8 [8 .08 ] D E .090 [2.29] (2 P lc.) .1 00 [2.54] .040 [1.02] (3 P lc.) .1 00* [2.54] Typ. .440 [11.18 ] C .2 8 0 [7 .11] N o. of D im ensions Post Plating/Part N os. Pos. AB C D E Plating A Plating B Plating C

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile H eaders, Shrouded Standard Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N o. of D im ensions Post Plating/Part N os. Pos. A BC D E Plating A Plating B Plating C

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile Headers, Shrouded Standard Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, duplex plated .0 0 0 0 1 5 [0 .0 0 0 38] gold on contact area, .0 0 0 1 0 0 -.0 002 00 [0.0 0 2 54 -0 .0 0 50 8] tin on solder area, w ith entire post underplated .000050 [0.0 0 1 2 7] nickel R elated Product D ata M ateable C onnectors AM PM OD U M TE R eceptacles — pages 2 32 , 2 33, 2 35 (used w ith coupling shroud on page 2 4 1 ) AM PM OD U W ire-Applied R eceptacles — pages 2 1 6-2 1 9 Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .1 00* [2.54] .040±.003 [1.02±0.08 ] D ia. Typ. A .090 [2.29] Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square Straight Post (w ith Plastic H olddow ns) B .400 [10.16 ] .1 00 [2.54] Typ. .1 50 [3.8 1] (2 P lc.) .1 2 5 [3.18 ] .2 00 [5.08 ] R ef. (C ontact A rea) .31 8 [8 .08 ] .090 [2.29] (2 P lc.) .1 00 [2.54] .040 [1.02] (3 P lc.) .1 00* [2.54] Typ. .440 [11.18 ] C .050 [1.27 ] (2 P lc.) .1 40 [3.56 ] (2 P lc.) .093 +.004 .09 3-.000 2.36 +0.10 2.3 6 -.000 .01 5 [.020] 0.38 [0.51] [ ] D ia. Typ. .2 8 0 [7 .11] N o. of D im ensions Part N os. Pos. ABC Plating A .1 8 0 [4.57 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile H eaders, Shrouded Standard Profile H eaders— Shrouded, w ith .0 66 [1.68] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating C — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel on entire post R elated Product D ata M ateable C onnectors AM PM OD U B oard M ount R eceptacles — pages 1 76, 1 79, 1 80 AM PM OD U W ire-Applied R eceptacles — pages 2 1 6-2 1 9 AM PM OD U M TE R eceptacles — pages 2 2 8, 2 2 9, 2 34 AM PM OD U M T R eceptacles — pages 2 56, 2 57 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .1 00* [2.54] .035 ±.003 [0.8 9±0.08 ] D ia. Typ. A .1 57 [3.99] Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square R ight-Angle Post (w ith D etent W indow s) B .400 [10.16 ] .1 00 [2.54] Typ. .066 [1.6 8 ] (2 P lc.) .1 35 [3.43] .2 00 [5.08 ] R ef. (C ontact A rea) .31 8 [8 .08 ] .090 [2.29] (2 P lc.) .1 00 [2.54] .040 [1.02] (3 P lc.) .1 00* [2.54] Typ. .48 9 [12.42] C .08 0 [2.03] E .2 40 [6 .10] Typ. D .639 [16 .23] .01 3 [0.33] (S tandoffs) .1 00 [2.54] .2 8 0 [7 .11] N o. of D im ensions Post Plating/Part N os. Pos. ABC DE Plating A Plating B Plating C

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile Headers, Shrouded Standard Profile H eaders— Shrouded, w ith .0 66 [1.68] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N o. of D im ensions Post Plating/Part N os. Pos. ABC DE Plating A Plating B Plating C

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile H eaders, Shrouded Standard Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating C — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel on entire post R elated Product D ata M ateable C onnectors AM PM OD U M TE R eceptacles — pages 2 32 , 2 33, 2 35 (used w ith coupling shroud on page 2 4 1 ) AM PM OD U W ire-Applied R eceptacles — pages 2 1 6-2 1 9 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .1 00* [2.54] .035±.003 [0.8 9±0.08 ] D ia. Typ. A .1 57 [3.99] Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square R ight-Angle Post (w ith D etent W indow s) B .400 [10.16 ] .1 00 [2.54] Typ. .1 50 [3.8 1] (2 P lc.) .1 35 [3.43] .2 00 [5.08 ] R ef. (C ontact A rea) .31 8 [8 .08 ] .090 [2.29] (2 P lc.) .1 00 [2.54] .040 [1.02] (3 P lc.) .1 00* [2.54] Typ. .48 9 [12.42] C .08 0 [2.03] E .2 40 [6 .10] Typ. D .639 [16 .23] .01 3 [0.33] (S tandoffs) .1 00 [2.54] .2 8 9 [7 .34] .2 8 0 [7 .11] N o. of D im ensions Post Plating/Part N os. Pos. ABC DE Plating A Plating B Plating C

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile Headers, Shrouded Standard Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N o. of D im ensions Post Plating/Part N os. Pos. ABC DE Plating A Plating B Plating C

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile H eaders, Shrouded Standard Profile H eaders— Shrouded, w ith .0 66 [1.68] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline .1 00 [2.54] M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating C — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel on entire post R elated Product D ata M ateable C onnectors AM PM OD U B oard M ount R eceptacles — pages 1 76, 1 79, 1 80 AM PM OD U W ire-Applied R eceptacles — pages 2 1 6, 2 1 7 AM PM OD U M TE R eceptacles — pages 2 2 8, 2 2 9, 2 34 AM PM OD U M T R eceptacles — pages 2 56, 2 57 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .035±.003 [0.8 9±0.08 ] D ia. Typ. A .1 57 [3.99] Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square R ight-Angle Post (w ith Pin Protection on 3 Sides) B .066 [1.6 8 ] (2 P lc.) .1 00 [2.54] Typ. .040 [1.02] (2 P lc.) .1 2 5 [3.18 ] .090 [2.29] (2 P lc.) .1 00 [2.54] .1 00* [2.54] .48 9 [12.42] C .361 [9.17 ] .639 [16 .23] .2 00 [5.08 ] R ef. (C ontact A rea) .31 8 [8 .08 ] .1 00 [2.54] .1 00* [2.54] .2 8 9 [7 .34] .2 8 0 [7 .11] N o. of D im ensions Post Plating/Part N os. Pos. ABC Plating A Plating B Plating C

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile Headers, Shrouded Standard Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N o. of D im ensions Post Plating/Part N os. Pos. ABC Plating A Plating B Plating C .1 57 [3.99] .1 2 5 [3.18 ] .2 00 [5.08 ] R ef. (C ontact A rea) .31 8 [8 .08 ] .1 00 [2.54] .2 8 0 [7 .11] .2 8 9 [7 .34] M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0 .0 01 2 7] nickel Plating C — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel on entire post R elated Product D ata M ateable C onnectors AM PM OD U W ire-Applied R eceptacles — pages 2 1 6, 2 1 7 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .035±.003 [0.8 9±0.08 ] D ia. Typ. A Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square R ight-Angle Post (w ith Pin Protection on 3 Sides) B .1 50 [3.8 1] (2 P lc.) .1 00 [2.54] Typ. .040 [1.02] (2 P lc.) .090 [2.29] (2 P lc.) .1 00 [2.54] .1 00* [2.54] Typ. .48 9 [12.42] C .361 [9.17 ] .639 [16 .23] .1 00* [2.54] .361 [9.17 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile H eaders, Shrouded Standard Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N o. of D im ensions Part N os. Pos. AB C M aterial and Finish H ousing — B lack therm oplastic, Posts — P hosphor bronze, duplex plated .0 0 0 0 1 5 [0 .0 0 0 38] gold on contact area, .0 0 0 1 0 0 -.0 002 00 [0.0 0 2 54 -0 .0 0 50 8] tin on solder area, w ith entire post underplated .000050 [0.0 0 1 2 7] nickel R elated Product D ata M ateable C onnectors AM PM OD U M TE R eceptacles — pages 2 32 , 2 33, 2 35 (used w ith coupling shroud on page 2 4 1 ) AM PM OD U W ire-Applied R eceptacles — pages 2 1 6-2 1 9 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .040 ±.003 [1.02 ±0.08 ]D ia. Typ. .451 [11.46 ] Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square R ight-Angle Post (w ith Plastic H olddow ns) B.1 50 [3.8 1] (2 P lc.) .1 00 [2.54] Typ. .040 [1.02] (2 P lc.) .1 35 [3.43] .090 [2.29] (2 P lc.) .48 9 [12.42] C .1 8 0 [4.57 ] .2 00 [5.08 ] R ef. (C ontact A rea) .31 8 [8 .08 ] .1 00 [2.54] .1 00* [2.54] .639 [16 .23] .01 5 [.020] 0.38 [0.51] [ ] .1 00 [2.54] .050 [1.27 ] (2 P lc.) A .1 40 [3.56 ] (2 P lc.) .451 [11.46 ] .093 +.004 .0 9 -.000 2.36 +0.10 2.36 -.000 D ia. (2 P lc.) [ ] (S tandoffs) .1 00 [2.54] Typ. .2 8 9 [7 .34] .2 8 0 [7 .11] .400 [10.16 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile Headers, Shrouded Standard Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) M aterial and Finish H ousing — B lack therm oplastic, Posts — C opper alloy, plated .000030 [0.0 0 0 76] gold over .0 0 0 050 [0.001 2 7] nickel on entire post R elated Product D ata M ateable C onnectors AM PM OD U W ire-Applied R eceptacles — pages 2 1 6-2 1 9 AM PM OD U M TE R eceptacles — pages 2 32 , 2 33, 2 35 (used w ith coupling shroud on page 2 4 1 ) Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. C .035±.003 [0.8 9±0.08 ] D ia. Typ. .31 8 [8 .08 ] Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .0 2 5 [0 .64] Square Straight Post (w ith D etent W indow s and M ounting E ars) B .1 50 [3.8 1] Typ. .1 00 [2.54] Typ. .090 [2.29] Typ. .1 2 5 [3.18 ] .090 [2.29] D .400 [10.16 ] .2 00 [5.08 ] R ef. (C ontact A rea) .1 00* [2.54] .440 [11.18 ] .1 00 [2.54] E .352 [8 .94] .08 0 [2.03] Typ. G A C F .2 2 0 [5.59] Typ. .352 [8 .94] Typ. .047 [1.19] (2 P lc.) .050 [1.27 ] Typ. .1 2 5 [3.18 ] D ia. Typ. D .062 [1.57 ] Typ. R .1 00* [2.54] Typ. .2 8 0 [7 .11] .090 [2.29] .2 40 [6 .10] Typ. N o. of D im ensions Part N os. Pos. ABCDEF G

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile H eaders, Shrouded Standard Profile H eaders— Shrouded B ulkhead Type; w ith .0 66 [1.68] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .45] C enterline M aterial and Finish H ousing — B lack therm oplastic, Posts — C opper alloy, plated .000030 [0.0 0 0 76] gold over .0 0 0 050 [0.001 2 7] nickel on entire post R elated Product D ata M ateable C onnectors AM PM OD U B oard M ount R eceptacles — pages 1 76, 1 79, 1 80 AM PM OD U W ire-Applied R eceptacles — pages 2 1 6-2 1 9 AM PM OD U M TE R eceptacles — pages 2 2 8, 2 2 9, 2 34 AM PM OD U M T R eceptacles — pages 2 56, 2 57 Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. .330 [8 .38 ] Recom m ended Panel Cutout B oth m ating faces have sam e end dim ension. .0 2 5 [0 .64] Square Straight Post (w ith D etent W indow s and M ounting E ars) B .047 [1.19] Typ. .066 [1.6 8 ] Typ. D .400 [10.16 ] N o. of D im ensions Part N os. Pos. ABCDE F G H .8 8 0 [22.35] .1 00 [2.54] E .08 0 [2.03] Typ. G A C F .2 2 0 [5.59] .31 8 [8 .08 ] .062 [1.57 ] Typ. .1 30-.1 35 [3.30-3.43] D ia. Typ. D ±.002 [±0.05 ] .062 [1.57 ] Thick Panel G .2 40 [6 .10] Typ. F .2 8 8 [7 .32] .530 [13.46 ] .040 [1.02] Typ. R .08 0 [2.03] Typ. .1 00 [2.54] Typ. .2 00 [5.08 ] R ef. (C ontact A rea) .090 [2.29] Typ. .090 [2.29] Typ. H ±.002 [±0.05 ] .2 35 ±.002 [5.97 ±0.05] .440±.002 [11.18 ±0.05] .005 [0.13] R M ax. (4 C orners) .352 [8 .94] Typ. .2 8 0 [7 .11]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile Headers, Shrouded Standard Profile H eaders— Shrouded B ulkhead Type; w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .45] C enterline M aterial and Finish H ousing — B lack therm oplastic, Posts — C opper alloy, plated .000030 [0.0 0 0 76] gold over .0 0 0 050 [0.001 2 7] nickel on entire post R elated Product D ata M ateable C onnectors AM PM OD U M TE R eceptacles — pages 2 32 , 2 33, 2 35 (used w ith coupling shroud on page 2 4 1 ) AM PM OD U W ire-Applied R eceptacles — pages 2 1 6-2 1 9 Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 See m ating connector for applicable product and application specifications. .330 [8 .38 ] Recom m ended Panel Cutout B oth m ating faces have sam e end dim ension. .0 2 5 [0 .64] Square Straight Post (w ith D etent W indow s and M ounting E ars) B .047 [1.19] Typ. .1 50 [3.8 1] Typ. D .400 [10.16 ] N o. of D im ensions Part N os. Pos. AB C D E F G H .8 8 0 [22.35] .1 00 [2.54] .08 0 [2.03] Typ. G A C F .2 2 0 [5.59] .31 8 [8 .08 ] .062 [1.57 ] Typ. .1 30-.1 35 [3.30-3.43] D ia. Typ. .062 [1.57 ] Thick Panel G .2 40 [6 .10] Typ. F .2 8 8 [7 .32] .530 [13.46 ] .040 [1.02] Typ. R .08 0 [2.03] Typ. .1 00 [2.54] Typ. .2 00 [5.08 ] R ef. (C ontact A rea) .090 [2.29] Typ. .090 [2.29] Typ. .2 35±.002 [5.97 ±0.05] .440±.002 [11.18 ±0.05] .005 [0.13] R M ax. (4 C orners) .352 [8 .94] Typ. D ±.002 [±0.05] H ±.002 [±0.05] .2 8 0 [7 .11]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard Profile H eaders, Shrouded Standard Profile H eaders— Shrouded B ulkhead Type; w ith .0 66/.150 [1.68/3.81] E nd D im ension, D ouble-R ow, .10 0 x .10 0 [2 .54 x 2 .45] C enterline M aterial and Finish H ousing — B lack therm oplastic, Posts — C opper alloy, plated .000030 [0.0 0 0 76] gold over .0 0 0 050 [0.001 2 7] nickel on entire post R elated Product D ata M ateable C onnectors w ith .0 66 [1.68] E nd D im ension — AM PM OD U B oard M ount R eceptacles — pages 1 76, 1 79, 1 80 AM PM OD U W ire-Applied R eceptacles — pages 2 1 6-2 1 9 AM PM OD U M TE R eceptacles — pages 2 2 8, 2 2 9, 2 34 AM PM OD U M T R eceptacles — pages 2 56, 2 57 M ateable C onnectors w ith .150 [3.81] E nd D im ension — AM PM OD U M TE R eceptacles — pages 2 32 , 2 33, 2 35 (used w ith coupling shroud on page 2 4 1 ) Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. .330 [8 .38 ] Recom m ended Panel Cutout .0 2 5 [0 .64] Square Straight Post (w ith D etent W indow s and M ounting E ars) .047 [1.19] Typ. .1 50 [3.8 1] Typ. D .8 8 0 [22.35] .1 00 [2.54] E .08 0 [2.03] Typ. H A .2 2 0 [5.59] .062 [1.57 ] Typ. .1 30-.1 35 [3.30-3.43] D ia. Typ. D ±.002 [±0.05] .062 [1.57 ] Thick Panel G F .400 [10.16 ] .040 [1.02] Typ. R .08 0 [2.03] .090 [2.29] Typ. M ±.002 [±0.05] .005 [0.13] R M ax. (4 C orners) .352 [8 .94] Typ. .2 8 9 [7 .34] K J .2 40 [6 .10] Typ. B C .31 8 [8 .08 ] .090 [2.29] Typ. .2 00 [5.08 ] R ef. (C ontact A rea) .2 8 0 [7 .11] .2 35±.002 [5.97 ±0.05] .040 [1.02] Typ. .066 [1.6 8 ] Typ. .400 [10.16 ] .2 2 0 [5.59] .352 [8 .94] Typ. D E .08 0 [2.03] C .047 [1.19] Typ. .062 [1.57 ] Typ. R L .44 0±.002 [11.1 8 ±0.05 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Standard Profile Headers, Shrouded Standard Profile H eaders— Shrouded B ulkhead Type; w ith .0 66/.150 [1.68/3.81] E nd D im ension, D ouble-R ow, .10 0 x .10 0 [2 .54 x 2 .45] C enterline (Continued) N o. of D im ensions Pos. AB C D E F Part N os. N o. of D im ensions Pos. G HJ K L M Part N os.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Low Profile H eaders, Shrouded AM P-LATC H Low Profile H eaders––Shrouded Product Facts I Available in selected positions 10 thru 60 I Flam e retardant, therm oplastic housings, 94V-0 rated I Vertical and right-angle versions available in double row configurations I Available in .0 2 5 [0 .64] square draw n w ire posts I W ash out clearance for flux rem oval I M ates w ith AM P-LATC H R ibbon C able C onnectors I Available w ith and w ithout eject latches I Available w ith and w ithout kinked soldertails for PC B retention I R ecognized under the C om ponent Program of Underw riters Laboratories Inc. File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 Perform ance C haracteristics E lectrical Insulation R esistance — 5,0 0 0 m egohm s m inim um initial D ielectric W ithstanding Voltage — 1 ,000 V rm s at sea level E nvironm ental Operating Tem perature — -65°C to + 1 05°C C urrent — 1 am pere m axim um per contact R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Low Profile Headers, Shrouded AM P-LATC H Low Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline M aterial and Finish H ousing — G lass-filled nylon, black, Posts — C opper alloy, plated as follow s: Plating A — G old flash over .000030 [0.0 0 0 76] m in. palladium -nickel plate on the m ating surfaces, .0001 00 [0.0 0 2 54 ] m in. tin plate on soldertails, w ith entire post underplated .000050 [0.0 0 1 2 7] m in. nickel Plating B — G old flash over .00001 5 [0.0 0 0 38] m in. palladium -nickel plate on the m ating surfaces, .0001 00 [0.0 0 2 54 ] m in. tin plate on soldertails, w ith entire post underplated .000050 [0.0 0 1 2 7] m in. nickel R elated Product D ata E lectrical C haracteristics — page 1 34 M ateable C onnectors — AM PM OD U W ire-Applied R eceptacles — page 2 2 0 AM PM OD U B oard M ount R eceptacles — pages 1 79, 1 80 Short Point W ire-Applied C onnectors — page 2 2 4 .0 2 5 [0 .64] Square Straight Post .045 [1.14] .1 65 [4.19] .1 00 [2.54] .075 ±.002 [1.91 ±0.05 ] .02 5 ±.001 [0.6 4 ±0.03 ] .360 [9.14] .1 30 [3.30] A B Typ. (2 P lc.) (2 P lc.) .040 .035 [1.02 ]0.8 9 .02 0 .01 5 [0.51 ]0.38 .38 5 [9.7 8 ] .1 8 5 ±.01 0 [4.7 0 ±0.25 ] .1 8 5 [4.7 0] .1 00 [2.54] .1 2 0 ±.01 5 [3.05 ±0.38 ] .2 00 [5.08 ] .01 5 .01 0 [0.38 ]0.25 .2 40 [6 .10] Typ. Recom m ended PC Board H ole Layout F or M anual Insertion .1 00±.003* [2.54±0.08 ] .040±.003 [1.02±0.08 ] .1 00±.003* [2.54±0.08 ] Typ. D ia. Typ. *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. (C ontact A rea) N o. of D im ensions Post Plating/Part N os. Pos. AB Plating A Plating B 10 .8 00 [20.32] .400 [10.16 ] 5103309-1 5103308 -1 14 1 .000 [25.40] .600 [15.24] 5103309-2 5103308 -2 16 1 .1 00 [27 .94] .700 [17 .7 8 ] 5103309-3 5103308 -3 20 1 .300 [33.02] .900 [22.8 6 ] 5103309-5 5103308 -5 24 1 .400 [35.56 ] 1 .1 00 [27 .94] — 1-5103308 -3 26 1 .600 [40.6 4] 1 .2 00 [30.48 ] 5103309-6 5103308 -6 34 2 .000 [50.8 0] 1 .600 [40.6 4] 5103309-7 5103308 -7 40 2 .300 [58 .42] 1 .900 [48 .26 ] 5103309-8 5103308 -8 50 2 .8 00 [7 1.12] 2 .400 [6 0.96 ] 1-5103309-0 1-5103308 -0 6 0 3.300 [8 3.8 2] 2 .900 [7 3.6 6 ] — 1-5103308 -2

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Low Profile H eaders, Shrouded AM P-LATC H Low Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) M aterial and Finish H ousing — G lass-filled nylon, black, Posts — C opper alloy, plated as follow s: Plating A — G old flash over .000030 [0.0 0 0 76] m in. palladium -nickel plate on the m ating surfaces, .0001 00 [0.0 0 2 54 ] m in. tin plate on soldertails, w ith entire post underplated .000050 [0.0 0 1 2 7] m in. nickel Plating B — G old flash over .00001 5 [0.0 0 0 38] m in. palladium -nickel plate on the m ating surfaces, .0001 00 [0.0 0 2 54 ] m in. tin plate on soldertails, w ith entire post underplated .000050 [0.0 0 1 2 7] m in. nickel R elated Product D ata E lectrical C haracteristics — page 1 34 M ateable C onnectors — AM PM OD U W ire-Applied R eceptacles — page 2 2 0 Short Point W ire-Applied C onnectors — page 2 2 4 .0 2 5 [0 .64] Square R ight-Angle Post Recom m ended PC Board H ole Layout F or M anual Insertion .1 00±.003* [2.54±0.08 ] Typ. D ia. Typ. .1 00±.003* [2.54±0.08 ] .035±.003 [0.8 9±0.08 ] *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. A B Typ. Typ. (contact area) .1 975 [5.016 ] .1 53 +.008 -.005 3.8 8 +.203 -.12 7 .1 35 +.02 0 -.01 0 3.42 +0.51 -0.25 .1 8 5 [4.6 9] .045 [1.14] .360 [9.14] .01 0 [0.25] .2 40 [6 .09] .2 00 [5.08 ] .1 30 [3.30] .02 5 ±.001 [.6 35 ±0.03 ] .1 30 [3.30] .1 8 5 ±.01 0 [4.6 9 ±0.25 ] .075 ±.002 [1.90 ±0.05 ] .1 65 [4.19] .02 5 ±.001 [0.6 4 ±0.03 ] .38 5 [9.7 7 ] .1 00 [2.54] Typ. Typ. Typ. (2 P lc.) 2 P lc. Position N o.1 Indicator .1 00 [2.54] .1 2 3 [3.12] [ ] [ ] N o. of D im ensions Post Plating/Part N os. Pos. AB Plating A Plating B 10 .8 00 [20.32] .400 [10.16 ] 5103311-1 5103310-1 14 1 .000 [25.40] .600 [15.24] 5103311-2 5103310-2 16 1 .1 00 [27 .94] .700 [17 .7 8 ] 5103311-3 5103310-3 20 1 .300 [33.02] .900 [22.8 6 ] 5103311-5 5103310-5 26 1 .600 [40.6 4] 1 .2 00 [30.48 ] 5103311-6 5103310-6 34 2 .000 [50.8 0] 1 .600 [40.6 4] 5103311-7 5103310-7 40 2 .300 [58 .42] 1 .900 [48 .26 ] 5103311-8 5103310-8 50 2 .8 00 [7 1.12] 2 .400 [6 0.96 ] 1-5103311-0 1-5103310-0 6 0 3.300 [8 3.8 2] 2 .900 [7 3.6 6 ] 1-5103311-2 —

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Low Profile Headers, Shrouded AM P-LATC H Low Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline & “Kinked” Soldertails for PC B R etention N o. of D im ensions Post Plating Pos. AB Part N os. 10 .8 00 [20.32] .400 [10.16 ] 5104338 -1 14 1 .000 [25.40] .600 [15.24] 5104338 -2 16 1 .1 00 [27 .94] .700 [17 .7 8 ] 5104338 -3 20 1 .300 [33.02] .900 [22.8 6 ] 5104338 -4 24 1 .400 [35.56 ] 1 .1 00 [27 .94] 5104338 -5 34 2 .000 [50.8 0] 1 .600 [40.6 4] 5104338 -7 40 2 .300 [58 .42] 1 .900 [48 .26 ] 5104338 -8 50 2 .8 00 [7 1.12] 2 .400 [6 0.96 ] 5104338 -9 6 0 3.300 [8 3.8 2] 2 .900 [7 3.6 6 ] 1-5104338 -0 M aterial and Finish H ousing — G lass-filled P PA , black, Posts — C opper alloy, plated w ith gold flash over .0 0 0 0 1 5 [0 .0 0 038] m in. palladium -nickel plate on the m ating surfaces, .0 0 0 1 0 0 [0 .0 0 2 54 ] m in. tin plate on soldertails, w ith entire post underplated .0 0 0 0 50 [0 .001 2 7] m in. nickel R elated Product D ata E lectrical C haracteristics — page 1 34 M ateable C onnectors — AM PM OD U W ire-Applied R eceptacles — page 2 2 0 AM PM OD U B oard M ount R eceptacles — pages 1 79, 1 80 Short Point W ire-Applied C onnectors — page 2 2 4 *Reflow solder process com patible .0 2 5 [0 .64] Square Straight Post (w ith B oard R etention Feature) *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .045 [1.14] .1 65 [4.19] .1 00 [2.54] .075±.002 [1.91±0.05] .02 5±.001 [0.6 4±0.03] .365 [9.27 ] .1 40 [3.56 ] A B.1 53 +.008 .1 53 -.005 3.8 8 +0.20 .15 - 0.13 Typ. (2 P lc.) (2 P lc.) .040 .035 [1.02 ]0.8 9 .02 0 .01 5 [0.51 ]0.38 .38 5 [9.7 8 ] .1 8 5±.01 0 [4.6 9±0.25] .1 8 5 [4.6 9] .1 00 [2.54] .1 2 0±.01 5 [3.05±0.38 ] .2 00 [5.08 ] Recom m ended PC Board H ole Layout F or M anual Insertion .1 00±.003* [2.54±0.08 ] .040±.003 [1.02±0.08 ] .1 00±.003* [2.54±0.08 ] Typ. D ia. Typ. .02 5 .02 0 [0.6 4 ]0.51 .2 40 [6 .10] [ ] (C ontact A rea)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Low Profile H eaders, Shrouded AM P-LATC H Low Profile H eaders— Shrouded, w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline & “Kinked” Soldertails for PC B R etention (Continued) N o. of D im ensions Post Plating Pos. AB Part N os. 10 .8 00 [20.32] .400 [10.16 ] 5104340-1 14 1 .000 [25.40] .600 [15.24] 5104340-2 16 1 .1 00 [27 .94] .700 [17 .7 8 ] 5104340-3 20 1 .300 [33.02] .900 [22.8 6 ] 5104340-4 40 2 .300 [58 .42] 1 .900 [48 .26 ] 5104340-8 50 2 .8 00 [7 1.12] 2 .400 [6 0.96 ] 5104340-9 Recom m ended PC Board H ole Layout F or M anual Insertion *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. M aterial and Finish H ousing — G lass-filled P PA , black, Posts — C opper alloy, plated w ith gold flash over .0 0 0 0 1 5 [0 .0 0 038] m in. palladium -nickel plate on the m ating surfaces, .0 0 0 1 0 0 [0 .0 0 2 54 ] m in. tin plate on soldertails, w ith entire post underplated .0 0 0 0 50 [0 .001 2 7] m in. nickel R elated Product D ata E lectrical C haracteristics — page 1 34 M ateable C onnectors — AM PM OD U W ire-Applied R eceptacles — page 2 2 0 Short Point W ire-Applied C onnectors — page 2 2 4 Typ. .1 65 [4.19] .02 5±.001 [0.6 4±0.03] .38 5 [9.7 7 ] A B Typ. .1 53 +.008 -.005 3.8 8 +0.20 -0.1 3 .1 8 5 [4.6 9] .045 [1.14] .370 [9.40] .1 40 [3.56 ] .1 30 [3.30] .1 8 5 ±.01 0 [4.6 9 ±0.25 ] Typ. .2 00 [5.08 ] .1 00 [2.54] Typ. (2 P lc.) 2 P lc. .02 5 .02 0 [0.6 4 ]0.50 .1 2 5 +.02 0 -.01 0 3.18 +0.51 -0.25 Typ. (contact area) .2 00 [5.08 ] .2 40 [6 .09] .02 5 ±.001 [.6 35 ±0.03 ] .1 2 3 [3.12] .1 00 [2.54] .075 ±.002 [1.90 ±0.05 ] 2 P lc. Position N o.1 Indicator .1 00±.003* [2.54±0.08 ] .040±.003 [1.02±0.08 ] .1 00±.003* [2.54±0.08 ] Typ. D ia. Typ. .0 2 5 [0 .64] Square R ight-Angle Post (w ith B oard R etention Feature) [ ] [ ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Universal Ejection Style Pin Headers Universal E jection Style Pin H eaders, M ilitary, C enter and D ual Polarized, .10 0 x .10 0 [2 .54 x 2 .54] C enters N ote: A ll part num bers are R oH S com pliant. Straight-Thru, 4-Sided .0 2 5 [0 .64] Sq. Posts M aterial and Finish H ousing & Latches — B lack therm oplastic, 94 V-0 rated C ontacts — B rass or phosphor bronze (at T E ’s option); D uplex .000030 [0.0 0 0 76] gold on m ating end, .0001 00 [0.0 0 2 54 ] m in. tin on term ination end, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel R elated Product D ata E lectrical C haracteristics — page 1 34 M ateable C onnectors — AM PM OD U W ire-Applied R eceptacles — page 2 2 0 M ounting Inform ation 4-24 self-tapping screw s and 2-56 bolts and nuts are available for m ounting straight-thru pin headers of pc boards. Typical applica - tions and part nos. for ordering this hardw are are presented below. N ote: 2-56 bolts and nuts m ay be used to m ount pin headers w ith and w ithout latches. If latches are to be used, the bolts m ust be positioned in the pin header before the latches are installed. Pin H eader w ith Latches Pin H eader w ithout Latches N o. of D im ensions Part N um ber Positions ABCD E (W ithout Latches) N otes: 1. P in headers in 10- and 14-position sizes have only one slot for snap-in polarizer (m ilitary polarization), located as show n. N otes: 2. P in headers in 10-position size have only slot for dual polarization, located as show n. .1 00 [2.54] .1 50 [3.8 1] .2 53 [6 .43] .336 [8 .53] .31 5 [8 .00] B C A .1 00 [2.54] .02 5 [0.6 4] D .096 [2.44] D ia. 2 P lc. .1 06 [2.7 4] .02 5 [0.6 4] .549 [13.94] .1 65 [4.19] .1 90 [4.8 3] .2 40 [6 .10] .1 07 [2.7 2] .2 8 9 [7 .34] E S older Tail Typ. .050 [1.27 ] .1 50 [3.8 1] .02 5 [0.6 4] .1 95 [4.95] Position N o.1 Indicator Pin H eader M ounting using 4-2 4 Self-Tapping Screw s: Part N o. 1 91 56-1 (for .062 [1 .57] Thick PC Board) Part N o. 1 91 56-2 (for .093 [2 .36] Thick PC Board) Part N o. 1 91 56-3 (for .1 2 5 [3.1 8 ] Thick PC Board) Pin H eader M ounting w ith 2 -56 Bolts and N uts: Part N o. 74638 3-1 (Bolt O nly) K it N o. 1 02 1 98 -1 (Bolt and N ut, 2 Each per K it) 4-24 S elf-Tapping S crew (2 R eq‘d.) 2-56 B olt & N ut (2 Each R eq‘d.) L atch (S ee N ote at left.) .2 56 [6 .50] N ote: U sed w ith H eader (optional) L atch (sold separately) Part N um ber 18 258 51-1

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Universal E jection Style Pin H eaders Universal E jection Style Pin H eaders, M ilitary, C enter and D ual Polarized, .10 0 x .10 0 [2 .54 x 2 .54] C enters (Continued) R ight-Angle, 4-Sided .0 2 5 [0 .64] Sq. Posts Pin H eader w ith Latches Pin H eader w ithout Latches A .1 00 [2.54] .1 00 [2.54] .1 00 [2.54] .2 40 [6 .10] .038 [0.97 ] .02 5 [0.6 4] .02 5 [0.6 4] .02 5 [0.6 4] D ia. .2 53 [6 .43] .1 07 [2.7 2] .1 50 [3.8 1] .1 50 [3.8 1] .31 5 [8 .00] .336 [8 .53] .050 [1.27 ] .1 90 [4.8 3] .1 08 [2.7 4] .549 [13.94] .1 95 [4.95] .096 [2.44] E Typ. S older Tail C B D Pos. N o. 1 Indicator .2 8 9 [7 .34] .1 65 [4.19] N ote: A ll part num bers are R oH S com pliant. M aterial and Finish H ousing & Latches — B lack therm oplastic, 94 V-0 rated C ontacts — B rass or phosphor bronze (at T E ’s option); D uplex .000030 [0.0 0 0 76] gold on m ating end, .0001 00 [0.0 0 2 54 ] m in. tin on term ination end, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel R elated Product D ata E lectrical C haracteristics — page 1 34 M ateable C onnectors — AM PM OD U W ire-Applied R eceptacles — page 2 2 0 M ounting Inform ation 4-24 self-tapping screw s and 2-56 bolts and nuts are available for m ounting straight-thru pin headers of pc boards. Typical applica - tions and part nos. for ordering this hardw are are presented below. N ote: 2-56 bolts and nuts m ay be used to m ount pin headers w ith and w ithout latches. If latches are to be used, the bolts m ust be positioned in the pin header before the latches are installed. N o. of D im ensions Part N um ber Positions ABCD E (W ithout Latches) N otes: 1. P in headers in 10- and 14-position sizes have only one slot for snap-in polarizer (m ilitary polarization), located as show n. N otes: 2. P in headers in 10-position size have only slot for dual polarization, located as show n. *B lue housing. Pin H eader M ounting using 4-2 4 Self-Tapping Screw s: Part N o. 1 91 56-1 (for .062 [1 .57] Thick PC Board) Part N o. 1 91 56-2 (for .093 [2 .36] Thick PC Board) Part N o. 1 91 56-3 (for .1 2 5 [3.1 8 ] Thick PC Board) Pin H eader M ounting w ith 2 -56 Bolts and N uts: Part N o. 74638 3-1 (Bolt O nly) K it N o. 1 02 1 98 -1 (Bolt and N ut, 2 Each per K it) 4-24 S elf-Tapping S crew (2 R eq‘d.) 2-56 B olt & N ut (2 Each R eq‘d.) L atch (S ee N ote at left.) .2 56 [6 .50] N ote: U sed w ith H eader (optional) L atch (sold separately) Part N um ber 18 258 51-1

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U Stacking C onnectors— Shrouded, .0 2 5 x .0 2 5 [0 .64 x 0 .64] Posts Shrouded Stacking Headers Product Facts I Parallel PC board stacking w ithout use of m other boards I Provides space betw een boards for interference-free routing of w ire-to-board connections I Tw o header heights available: .785 [19.94] and 1.2 0 0 [30 .48] I Vertical m ount headers are fully shrouded I R eceptacle contacts have dual cantilever beam s w ith built-in overstress protection I .0 2 5 [0 .64] sq. posts and receptacle contacts on double-row , .10 0 x .10 0 [2 .54 x 2 .54] centers I H eader posts and receptacle contacts are phosphor bronze, duplex plated I H ousings are m ade of flam e retardant, glass-filled therm oplastic A M PM O D U stacking connectors are a tw o-piece interconnection system designed for parallel stacking printed circuit boards, w ith out the use of m other boards. Vertical m ount headers and receptacle assem blies feature duplex plated posts and receptacle contacts on a double-row, .1 0 0 x .1 0 0 [2.54 x 2.54] grid. The .0 25 [ 0 .64] sq. header posts are m ore protected, and the top-entry receptacle contacts utilize the proven A M PM O D U receptacle contact design; dual cantilever beam s w ith built- in overstress protection. Headers are available in tw o heights: .785 [1 9.94] and 1 .20 0 [3 0 .48]. This allow s the custom er to use the height of the header to keep w ire-to-board connections up and aw ay from other board com ponents, particularly if the com po nents are densely packaged around the header.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacle Assem blies, D ouble-R ow B oard M ounted N ote: A ll part num bers are R oH S com pliant. Shrouded Stacking H eaders Vertical M ount, Top E ntry, H igh Profile, Selectively Loaded (w ith Standoffs) A B .1 00* [2.54] .050 [1.27 ] .035±.003 Recom m ended PC Board H ole Layout *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. N o. of D im ensions Receptacle Assem bly Pos. AB Part N o. 48 * 2 .400 [6 0.96 ] 2 .300 [58 .42] 5-1027 6 6 -1 (40 A ctive) 6 0* 3.000 [7 6 .2] 2 .900 [7 3.6 6 ] 5-1027 6 6 -4 (52 A ctive) *In addition to the active positions, each receptacle has four cavities on each end that are not loaded w ith contacts. These em pty cavities aid in aligning the receptacle w ith header posts during m ating. N otes: 1. Part no. and date code stam ped on housing w here size perm its. N otes: 2. These receptacle assem blies m ate w ith headers of the sam e size as the active positions listed above. R efer to pages 143 and 144. .2 38 [6 .05] .1 00 [2.54] .1 00* [2.54] .1 00 [2.54] .32 0 [8 .13] .02 0 [0.51] (S tandoffs) .02 5 [0.6 4] .1 75 [4.45] .1 00 [2.54] .1 1 5 [2.92] Post Entry Typ. B M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — Phosphor bronze, plated .00001 0 [0.0002 54 ] m in. gold on m ating area, .0001 50-.000300 [0.00381 - 0.00762 ] m atte tin on solder area, w ith entire contact underplated .000050- .0001 00 [0.001 2 7-0.002 54 ] nickel

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System H eaders, D ouble-R ow , .785 [19.94] H eight N ote: A ll part num bers are R oH S com pliant. Shrouded Stacking Headers N o. of D im ensions H eader Pos. AB CD Part N o. N ote: These headers m ate w ith receptacle assem blies having the sam e num ber of active positions. S ee page 142. A .1 03 [2.6 2] D ia. (at S urface) B .2 65 [6 .7 3] .0 2 5 x .0 2 5 [0 .64 x 0 .64] Straight Post (w ith Pin Protection) .1 2 4 [3.15] .1 00 [2.54] C .1 00* [2.54] Recom m ended PC Board H ole Layout *±.003 [±0.08 ] tolerances not to accum u - late w ithin one connector pattern. .1 00 [2.54] Typ. .32 0 [8 .13] .090 [2.29] .099 [2.51] D ia. (at .340 [8 .6 4] D epth) .348 [8 .8 4] .2 50 [3.8 1] .070 [1.7 8 ] .38 0 [9.6 5] M in. .340 [8 .6 4] D .02 5 [0.6 4] S q. Posts .1 03 [2.6 2] .78 5 [19.94] .450 [11.43] .2 75 [6 .99] .08 4 [2.13] .2 68 [6 .8 1] .02 5 [0.6 4] S q. Posts .1 00* [2.54] Typ. .050±.003 [1.27 ±0.08 ] C B .2 50±.003 [1.09±0.13] .1 2 5 [3.18 ] D ia. D ia. M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — Phosphor bronze, plated .00001 5 [0.000381 ] m in. gold on m ating area, .0001 00-.0002 00 [0.002 54 - 0.00508] m atte tin on solder area, w ith entire post underplated .000050 [0.001 2 7] nickel

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System H eaders, D ouble-R ow , 1.2 0 0 [30 .48] H eight N ote: A ll part num bers are R oH S com pliant. Shrouded Stacking H eaders A .077 [1.96 ] D ia. (at S urface) B .2 65 [6 .7 3] .0 2 5 x .0 2 5 [0 .64 x 0 .64] Straight Post (w ith Pin Protection) .1 2 4 [3.15] .1 00 [2.54] C .1 00* [2.54] Recom m ended PC Board H ole Layout *±.003 [±0.08 ] tolerances not to accum u - late w ithin one connector pattern. .1 00 [2.54] Typ. .32 0 [8 .13] .090 [2.29] .073 [1.8 5] D ia. (at .340 [8 .6 4] D epth) .348 [8 .8 4] .040 [1.02] .350 [8 .8 9] M in. .340 [8 .6 4] D .02 5 [0.6 4] S q. Posts .098 [2.49] 1 .2 00 [30.48 ] .8 65 [21.97 ] .2 75 [6 .99] .08 4 [2.13] .2 68 [6 .8 1] .02 5 [0.6 4] S q. Posts .1 00* [2.54] Typ. .050±.003 [1.27 ±0.08 ] C B .2 50±.003 [1.09±0.13] .1 2 5 [3.18 ] D ia. .2 50 [6 .35] .2 50 [6 .35] .060 [1.52] M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — Phosphor bronze, plated .00001 5 [0.000381 ] m in. gold on m ating area, .0001 00-.0002 00 [0.002 54 - 0.00508] m atte tin on solder area, w ith entire post underplated .000050 [0.001 2 7] nickel N o. of D im ensions H eader Pos. AB CD Part N o. N ote: This header m ates w ith receptacle assem bly having the sam e num ber of active positions. S ee page 142.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AC TION PIN H eaders— Shrouded and Unshrouded ACTION PIN Headers Product Facts I Straight posted unshrouded and shrouded versions I .0 2 5 [0 .64] square AC TION PIN posts I AC TION PIN posts m ake a gas-tight, press-fit connec - tion in plated-through holes I D esigned not to dam age plated-through holes I Unshrouded headers available in selected sizes 1 through 40 positions (single-row ) and 4 through 80 positions (double-row ) I Shrouded headers (double- row ) available in selected sizes of 6 through 60 positions I Flam e retardant, black therm oplastic housings, 94V-0 rated I .10 0 [2 .54] C enterline spacing I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 16455 R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AC TION PIN H eaders— Unshrouded, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. AC TION PIN H eaders, Unshrouded A .2 00 [5.08 ] R ef. (C ontact A rea) B .042 [1.07 ] Typ. .0 2 5 [0 .64] Square Straight Post M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated Posts — C opper alloy, duplex plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] m atte tin on term ination end, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 AC TION PIN Posts — pages 1 50, 1 51 Application Tooling — page 1 52 Technical D ocum ents — page 2 76 See m ating connector for applicable product and application specifications .2 50 [6 .35] .32 0 [8 .13] B .1 00* [2.54] S ee page 16 8 for hole dim ensions Recom m ended PC Board H ole Layout *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .1 00 [2.54] Typ. .092 [2.34] .090 [2.29] .050 [1.27 ] M ax. Part N os. N o. of D im ensions F or .062 F or .093-.1 2 5 Thick PC Boards Thick PC Boards 1. 08 4 [2.13] — 8 -103336 -5 8 -1028 98 -5 2 .1 8 4 [4.6 7 ] .1 00 [2.54] 8 -103336 -4 8 -1028 98 -4 3 .2 8 4 [7 .21] .2 00 [5.08 ] 9-103336 -0 9-1028 98 -0 4 .38 4 [9.7 5] .300 [7 .6 2] 8 -103336 -6 8 -1028 98 -6 5 .48 4 [12.29] .400 [10.16 ] 8 -103336 -8 8 -1028 98 -8 6 .58 4 [14.8 3] .500 [12.7 0] 8 -103336 -7 8 -1028 98 -7 7 .68 4 [17 .37 ] .600 [15.24] 8 -103336 -9 8 -1028 98 -9 8 .78 4 [19.91] .700 [17 .7 8 ] 5-103336 -1 5-1028 98 -1 9 .8 8 4 [22.45] .8 00 [20.32] 5-103336 -2 5-1028 98 -2 10 .98 4 [24.99] .900 [22.8 6 ] 5-103336 -3 5-1028 98 -3 11 1 .08 4 [27 .53] 1 .000 [25.40] 5-103336 -4 5-1028 98 -4 12 1 .1 8 4 [30.07 ] 1 .1 00 [27 .94] 5-103336 -5 5-1028 98 -5 13 1 .2 8 4 [32.6 1] 1 .2 00 [30.48 ] 5-103336 -6 5-1028 98 -6 14 1 .38 4 [35.15] 1 .300 [33.02] 5-103336 -7 5-1028 98 -7 15 1 .48 4 [37 .6 9] 1 .400 [35.56 ] 5-103336 -8 5-1028 98 -8 16 1 .58 4 [40.23] 1 .500 [38 .10] 5-103336 -9 5-1028 98 -9 17 1 .68 4 [42.7 7 ] 1 .600 [40.6 4] 6 -103336 -0 6 -1028 98 -0 18 1 .78 4 [45.31] 1 .700 [43.18 ] 6 -103336 -1 6 -1028 98 -1 19 1 .8 8 4 [47 .8 5] 1 .8 00 [45.7 2] 6 -103336 -2 6 -1028 98 -2 20 1 .98 4 [50.39] 1 .900 [48 .26 ] 6 -103336 -3 6 -1028 98 -3 21 2 .08 4 [52.93] 2 .000 [50.8 0] — 6 -1028 98 -4 22 2 .1 8 4 [55.47 ] 2 .1 00 [53.34] — 6 -1028 98 -5 23 2 .2 8 4 [58 .01] 2 .2 00 [55.8 8 ] — 6 -1028 98 -6 24 2 .38 4 [6 0.55] 2 .300 [58 .42] — 6 -1028 98 -7 25 2 .48 4 [6 3.09] 2 .400 [6 0.96 ] 6 -103336 -8 6 -1028 98 -8 26 2 .58 4 [6 5.6 3] 2 .500 [6 3.50] — 6 -1028 98 -9 27 2 .68 4 [6 8 .17 ] 2 .600 [6 6 .04] — 7 -1028 98 -0 28 2 .78 4 [7 0.7 1] 2 .700 [6 8 .58 ] — 7 -1028 98 -1 29 2 .8 8 4 [7 3.25] 2 .8 00 [7 1.12] — 7 -1028 98 -2 30 2 .98 4 [7 5.7 9] 2 .900 [7 3.6 6 ] 7 -103336 -3 7 -1028 98 -3 32 3.1 8 4 [8 0.8 7 ] 3.1 00 [7 8 .7 4] 7 -103336 -5 7 -1028 98 -5 36 3.58 4 [91.03] 3.500 [8 8 .90] 7 -103336 -9 7 -1028 98 -9 40 3.98 4 [101.19] 3.900 [99.06 ] 8 -103336 -3 8 -1028 98 -3 N ote: To insert header into P C board, use seating tool w ith arbor tool or air pow ered m achine— page 152.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AC TION PIN H eaders— Unshrouded, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. ACTION PIN Headers, Unshrouded A .2 00 [5.08 ] R ef. (C ontact A rea) B .042 [1.07 ] (2 P lc.) .0 2 5 [0 .64] Square Straight Post M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated Posts — C opper alloy, duplex plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] m atte tin on term ination end, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 AC TION PIN Posts — pages 1 50, 1 51 Application Tooling — page 1 52 Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 See m ating connector for applicable product and application specifications .2 50 [6 .35] .32 0 [8 .13] B .1 00* [2.54] S ee page 151 for hole dim ensions Recom m ended PC Board H ole Layout *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .1 00 [2.54] .1 00 [2.54] Typ. .1 92 [4.8 8 ] .090 [2.29] Part N os. 4 .1 8 4 [4.6 7 ] .1 00 [2.54] 5-103542-1 5-103233-1 6 .2 8 4 [7 .21] .2 00 [5.08 ] 5-103542-2 5-103233-2 8 .38 4 [9.7 5] .300 [7 .6 2] 5-103542-3 5-103233-3 10 .48 4 [12.29] .400 [10.16 ] 5-103542-4 5-103233-4 12 .58 4 [14.8 3] .500 [12.7 0] 5-103542-5 5-103233-5 14 .68 4 [17 .37 ] .600 [15.24] 5-103542-6 5-103233-6 16 .78 4 [19.91] .700 [17 .7 8 ] 5-103542-7 5-103233-7 18 .8 8 4 [22.45] .8 00 [20.32] 5-103542-8 5-103233-8 20 .98 4 [24.99] .900 [22.8 6 ] 5-103542-9 5-103233-9 22 1 .08 4 [27 .53] 1 .000 [25.40] 6 -103542-0 6 -103233-0 24 1 .1 8 4 [30.07 ] 1 .1 00 [27 .94] 6 -103542-1 6 -103233-1 26 1 .2 8 4 [32.6 1] 1 .2 00 [30.48 ] 6 -103542-2 6 -103233-2 28 1 .38 4 [35.15] 1 .300 [33.02] 6 -103542-3 6 -103233-3 30 1 .48 4 [37 .6 9] 1 .400 [35.56 ] 6 -103542-4 6 -103233-4 32 1 .58 4 [40.23] 1 .500 [38 .10] 6 -103542-5 6 -103233-5 34 1 .68 4 [42.7 7 ] 1 .600 [40.6 4] 6 -103542-6 6 -103233-6 36 1 .78 4 [45.31] 1 .700 [43.18 ] 6 -103542-7 6 -103233-7 38 1 .8 8 4 [47 .8 5] 1 .8 00 [45.7 2] 6 -103542-8 6 -103233-8 40 1 .98 4 [50.39] 1 .900 [48 .26 ] 6 -103542-9 6 -103233-9 42 2 .08 4 [52.39] 2 .000 [50.8 0] 7 -103542-0 7 -103233-0 46 2 .2 8 4 [58 .01] 2 .2 00 [55.8 8 ] 7 -103542-2 — 50 2 .48 4 [6 3.09] 2 .400 [6 0.96 ] 7 -103542-4 7 -103233-4 6 0 2 .98 4 [7 5.7 9] 2 .900 [7 3.6 6 ] 7 -103542-9 7 -103233-9 6 6 3.2 8 4 [8 3.41] 3.2 00 [8 1.28 ] 8 -103542-2 — 8 0 3.98 4 [101.19] 3.900 [99.06 ] 8 -103542-9 8 -103233-9 .1 00* [2.54] .050 [1.27 ] M ax.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AC TION PIN H eaders— Shrouded w ith .0 66 [1.68] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. AC TION PIN H eaders, Shrouded A .2 00 [5.08 ] R ef. (C ontact A rea) B .066 [1.6 8 ] (2 P lc.) .0 2 5 [0 .64] Square Straight Post (w ith D etent W indow s, for .0 93-.12 5 [.2 36-3.18] Thick PC B oard) M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated Posts — C opper alloy, duplex plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] m atte tin on term ination end, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable C onnectors — AM PM OD U B oard M ount R eceptacles — pages 1 76, 1 79, 1 80 AM PM OD U W ire-Applied R eceptacles — pages 2 1 7-2 1 9 AM PM OD U M T R eceptacles — pages 2 56, 2 57 AC TION PIN Posts — pages 1 50, 1 51 Application Tooling — page 1 52 Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 See m ating connector for applicable product and application specifications .2 50 [6 .35] .32 0 [8 .13] B .1 00* [2.54] S ee page 151 for hole dim ensions Recom m ended PC Board H ole Layout *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .1 00 [2.54] Typ. .090 [2.29] N o. of D im ensions H eader Pos. AB C D E Part N os. .1 00* [2.54] C .090 [2.29] (2 P lc.) .1 00 [2.54] .040 [1.02] (3 P lc.) .400 [10.16 ] .440 [11.18 ] .08 5 [2.16 ] .2 40 [6 .10] (2 P lc.) D E

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AC TION PIN H eaders— Shrouded w ith .150 [3.81] E nd D im ension, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. ACTION PIN Headers, Shrouded A .2 00 [5.08 ] R ef. (C ontact A rea) B .1 50 [3.8 1] (2 P lc.) .0 2 5 [0 .64] Square Straight Post (w ith D etent W indow s, for .0 93-.12 5 [.2 36-3.18] Thick PC B oard) M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated Posts — C opper alloy, duplex plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] m atte tin on term ination end, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable C onnectors — AM PM OD U M TE R eceptacles — pages 2 32 , 2 33 AC TION PIN Posts — pages 1 50, 1 51 Application Tooling — page 1 52 Accessories B arrier Insert — page 2 04 Technical D ocum ents — page 2 76 See m ating connector for applicable product and application specifications .2 50 [6 .35] .32 0 [8 .13] B .1 00* [2.54] S ee page 151 for hole dim ensions Recom m ended PC Board H ole Layout *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. .1 00 [2.54] Typ. .090 [2.29] N o. of D im ensions H eader Pos. AB C D E Part N os. .1 00* [2.54] C .090 [2.29] (2 P lc.) .1 00 [2.54] .040 [1.02] (3 P lc.) .400 [10.16 ] .440 [11.18 ] .08 5 [2.16 ] .2 40 [6 .10] (2 P lc.) D E

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AC TION PIN Press-Fit Posts AC TION PIN Press-Fit Posts The R eliable Plated-Through H ole Interconnect Solderless interconnections have been popular in electrical and electronic applications w ith w orld-w ide success for decades. They provide reliable electrical and m echanical stability and offer applied-cost savings across the board. F or PC board applications, com pliant A C TIO N PIN posts provide these features: I Large gas-tight contact zone I High reliability due to stored energy I M ore resistant to dam age to plated-through holes during installation I E specially suited for m ultilayer PC boards I Less costly board m anufacturing due to larger hole tolerances com pared to use of solid pins I A pplication can be m ade by end-user I Repairability— contact can be replaced in the sam e pin location (tw o repairs) I Installation w ith no heat cycling of board I Perm its m ass insertion by m inim izing forces needed to insert pins as com pared to solid pin press-fit application I Significant applied-cost savings in m any applications Since com pliant A C TIO N PIN posts do not have to be soldered, problem s associated w ith solder are elim inated, such as: I F aulty solder joints I Solder fum es; contam inants are deposited on the contacts I Solder spots; short circuits betw een printed circuits I F lux residuals I Therm al strain on printed circuit boards and com ponents I D egassing of plated-through holes Solderless press-fit interconnections using com pliant pins are prim arily integrated in, but not lim ited to, backplanes. Solderless press-fit interconnections are used in racks, especially w here connectors m ust be fixed on the solder side of the PC board and/or com ponent side. In these applications, the holes for A C TIO N PIN post connectors are covered during the soldering process and press-fitting is perform ed after soldering. O ther applications for A C TIO N PIN post interconnections include PC boards that incorporate com ponents using surface m ount technology (SM T). Here, too, press-fit inter connections can be applied after soldering, thus elim inating com plications associated w ith connectors suitable for surface m ounting. Cross-Section Area of ACTIO N PIN Press-F it Post in Printed Circuit Board H oles M inim um H ole D ia. .037 [0.94] M axim um H ole D ia. .043 [1.09] Principle of the C om pliant AC TION PIN Post W hen a com pliant A C TIO N PIN post is inserted into a plated-through hole, tw o spring m em bers are com pressed, exerting force against the hole for a gas-tight connection. The diam eter of the hole is sm aller than the diagonal size of the pin (see cross-section illustration below ). The beam characteristics of the pin are designed so that a plastic, as w ell as an elastic, deform ation takes place during insertion. The tw o spring m em bers com press to different degrees to accom m odate hole tolerances. The com pliant pin also reduces strain on the board. W ith a rigid pin, the elastic strain energy is stored entirely in the board, leading to dam age of the plated-through holes. W ith the com pliant A C TIO N PIN post, the residual force of the elastic deform ation m aintains stored energy to produce a tight contact zone betw een the pin and the plated-through hole. This m aintains long-term electrical and m echanical reliability of the interconnection.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AC TION PIN Press-Fit Posts (Continued) ACTION PIN Press-Fit Posts PC B oard Thickness A C TIO N PIN posts are designed for use in a variety of PC board thicknesses. How ever, certain A C TIO N PIN posts are to be used in specific ranges of board thicknesses. To prom ote optim um perform ance, the recom m ended board thicknesses provided w ith the connector being used m ust be follow ed. A C TIO N PIN posts provide a m ore reliable press-fit connection. Localized pressure in the interface area provides oxide break-through and prevents corrosion better in m any of the harshest environm ents to help provide a reliable connection. A lso, radial and axial distortion are controlled to m eet today’s standards for m ultilayer board applications. Œ A nnular R ing (S ee N ote)  D rilled H ole Ž C opper Thickness  Tin-lead Thickness  P lated-Through H ole ACTIO N PIN Contact D rilled H ole Plating Thicknesses Plated-Through D istortion Specification* M aterial Thickness D iam eter  Copper Ž* Tin-lead  H ole D iam eter  Average M axim um *M axim um hardness of copper layer is 150 K noop. **R adial hole distortion. N ote: R ecom m ended annular ring diam eter is hole diam eter plus .02 0 [0.51]. AC TION PIN Post/PC B oard Applications

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for AM PM OD U H eaders w ith AC TION PIN Posts N ote: A ll part num bers are R oH S com pliant. Application Tooling for AC TION PIN Posts Pin headers w ith A C TIO N PIN posts allow high speed, solderless back-plane construction through press-fit applica - tion. Press fitting connectors to printed circuit boards requires special seating tools w hich transfer applica - tion force directly to the contacts. F orce applied to the tool to seat the connectors can be provided by the TE seating m achines show n on this page. F or tooling inform ation, call the TE A utom ation G roup 1 -80 0 -722-1 1 1 1 . Single-R ow C onnector Seating Tools T ooling A ssem bly N o. 911 71 -1 is used to install single-row A M PM O D U headers w ith A C TIO N PIN posts into PC boards. AC TION PIN Post R eplacem ent Tooling Rear Insertion/Extraction Tool N o. 2 658 71 -7 (Ref. 408 -2 636) Includes: Im pact Tool N o. 38 0392 -8 Rem oval Tool N o. 2 65964-1 Replacem ent Tip N o. 308 554-1 D ouble-Row Connector Seating Tools H eader Size Tool (N o. of Pos.) Assem bly N o. 4 9117 0-1 6 9117 0-1 8 9117 0-2 12 9117 0-5 14 9117 0-6 16 9117 0-7 20 9117 0-9 24 1-9117 0-1 30 1-9117 0-4 36 1-9117 0-7 40 1-9117 0-9 50 2-9117 0-4 6 0 2-9117 0-9 8 0 3-9117 0-2 96 3-9117 0-5 100 3-9117 0-6 120 3-9117 0-8 140 4-9117 0-0 200 4-9117 0-2 Triple-Row Connector Seating Tools H eader Size Tool (N o. of Pos.) Assem bly N o. 96 9116 9-8 105 9116 9-6 120 9116 9-7 150 9116 9-3 195 9116 9-2 204 9116 9-1 210 9116 9-5 300 9116 9-9 Press M odel D escription M ax Pressing F orce M ax Board Size (L x W ) tons [kN ] in [m m ] B M EP 3T S em i-autom atic, benchtop 3 [26 .7 ] 18 x 24 [46 0 x 6 10] servo-electric press B M EP 5T S em i-autom atic, benchtop 5 [44.5] 18 x 24 [46 0 x 6 10] servo-electric press M EP 6 T S em i-autom atic, stand-alone 6 [53.4] 24 x 36 [6 10 x 914] servo-electric press M EP 12T S em i-autom atic, stand-alone 12 [106 .8 ] 30 x 36 [ 7 6 2 x 914] servo-electric press A EP 12T A utom atic, inline 12 [106 .8 ] 36 x 48 [914 x 1219] servo-electric press A EP 6 T A utom atic, stand alone 6 [53.4] 30 x 36 [7 6 2 x 914] servo-electric press ASG Servo E lectric Presses TE offers a w ide range of servo-electric presses for the application of press-fit connectors. System s are available w ith varying force capacity, board size capac - ity and process capability. E ach system features real- tim e force feedback and PC control to allow the highest level of control and trace - ability. E very connector pressed is m onitored to con - firm that m axim um force is not exceeded and m inim um force is m et. E ach system controls force, height and speed to allow term ination of the pressing cycle by force or height param eters. C om plete SPC data is avail - able as each connector press cycle is m onitored and stored. Please see the m atrix below and contact TE A utom ation G roup at 1 -80 0 - 722-1 1 1 1 for assistance in understanding w hich system w ill best m eet your needs. BM EP 5T AEP 6T

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for Post Insertion N ote: A ll part num bers are R oH S com pliant. Application Tooling for ACTION PIN Posts M odular Insertion System B ench M achine N o. 2 1760 0 -1 This m achine uses TE insertion heads to install a variety of printed circuit board products at rates of 2,0 0 0 per hour. The printed circuit board is placed in a B oard Holding F ixture w hich is attached to a tw o-hand controlled m echa - nism . The operator m oves the board over the m achine anvil; a sw itch in the anvil actuates the m achine w hen the printed circuit board is placed on the anvil. A spotlight illum inates the insertion area. C onsult TE for further inform ation on this m achine and the insertion heads. P30 0 and P350 Autom atic Insertion M achines The P3 0 0 and P3 50 are autom atic insertion m achines for the application of reeled com pliant pin and thru-hole products. System s are available as stand alone or fully inline w ith SM E M A com patible conveyor system . U p to 3 different insertion heads can be m ounted on a system allow ing one m achine to apply up to 3 different products. Insertion rates of up to 3 insertions per second on the P3 0 0 and up to 5 insertions per second on a P3 50 are possible (application dependent). PC B s up to 1 5.5" x 23 .5" [40 0 x60 0 m m ] on the P3 0 0 and up to 1 7.5" x 1 7.5" [450 x450 m m ] on the P3 50 can be processed by high speed XY positioning tables. A w ide range of options, including force m onitoring, PC B vision correct, and PC B thickness m easurem ent are available to m eet your perform ance and production flexibility requirem ents. TE offers a w ide range of application tooling solutions ranging from stand alone m anual insertion system s through fully autom atic inline system s. Please contact your local TE repre - sentative or the TE Tooling A ssistance C enter at 1 -80 0 -722-1 1 1 1 for help in finding the right solution to m eet your particular requirem ents.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AC TION PIN Stacking C onnector System (N on-Interm ateable w ith AM PM OD U C onnectors) AC TION PIN Stacking C onnector System A C TIO N PIN Stacking C onnectors are a fam ily of tw o-piece connectors used to stack m ultiple printed circuit boards in parallel. They have been developed to provide a m ore reliable and econom ical m eans of com pact w iring and high- density packaging inside a variety of electronic equipm ent. The connectors have m any advanced features: they can be used to connect bus lines in the shortest possible distance w ithout the need of a m other board, thus perm itting effective utilization of space above the board; com pared w ith other m ethods of jum per connection using cable connectors, they m ake the overall board layout m ore clean and straight for com pact packaging. C ontacts are on 2.54 x 2.54 [.1 0 0 x .1 0 0 ] grid. The connectors are available in sizes of 26, 3 0 , 3 4, 40 , 50 and 60 positions. A C TIO N PIN Stacking C onnectors consist of a receptacle assem bly, a m ating post header and a post hood to protect the post portion of the receptacle assem bly. A com plete description of the A C TIO N PIN Stacking C onnectors is presented on the follow ing page (1 55). Product Facts I C an stack m ultiple printed circuit boards w ithout the need of a m other board I C onnect bus lines in the shortest possible distance I R eceptacle assem bly has AC TION PIN posts for sol - derless board m ounting I C an be m ounted onto the board sim ply by press fitting w ith M ini-Press I R eceptacle assem bly is easy to service and replace (up to 2 tim es) I R eceptacle contacts are of fork design to m ate w ith posts at tw o points. Virtually elim inates danger of scooping at m ating/ unm ating I Stacking dim ensions are w hen using receptacle assem blies together, and w hen using a com bination of receptacle and post header assem blies I Accepts 1.6 [.0 62 ] thick boards I H ousing provided w ith polarization to help prevent m ism ating I H ousing m ade of chem ical- resistant glass-filled PB T, black in color I C ontacts are of copper alloy m aterial w ith high spring characteristics, gold-over- nickel plated I Post hood available to protect the post portion of receptacle contacts. C an be selected depending on stacking dim ensions I C onnectors available in sizes of 2 6, 30 , 34, 40 , 50 and 60 positions I Product specification: 10 8-5197 M ETRIC Dim ensions are m illim eters over inches

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AC TION PIN Stacking C onnector System (N on-Interm ateable w ith AM PM OD U C onnectors) (Continued) N ote: A ll part num bers are R oH S com pliant. ACTION PIN Stacking Connector System R eceptacle Assem bly The receptacle assem bly features reliability and econom y characteristic of this product line. The m ating portion of its built-in receptacle contacts is a fork design, highly resilient and helps prevent dam age to contacts by scooping at m ating/ unm ating. O n the board m ount side of the assem bly are 0 .55 [.0 22] square A C TIO N PIN posts. N o soldering is required to m ount the assem bly on the board, the posts being sim ply, press fit into the board’s 0 .825 [.0 3 2] diam eter holes. Tw o types of receptacle assem blies are available; one is used w ith an outer - m ost board and the other w ith interm ediary boards. A solder version is also avail - able for the outer board m ount assem bly. Post H ood W hen using the interm ediary board m ount receptacle assem bly, this post hood is used to protect the post portion of the assem bly. The post hood is available in tw o types: one w ith the housing height of 1 0 .0 [.3 94 ] and the other w ith the housing height of 1 5.7 [.61 8]. They can be selected, depending on stacking dim ensions. Post H eader The post header is m ounted onto the outer board on the other side of the board to w hich an outer board m ount receptacle assem bly is applied. The post header is preloaded w ith 0 .50 [.0 22] square soldering posts. These posts are protected by the side w alls of the housing. Stacking dim ensions provided by this connector line are as follow s: W hen the outer board receptacle and interm ediary board receptacle assem blies are used W hen the interm ediary board receptacle assem bly and the post header assem bly are used Typical Application R eceptacle A ssem bly (For outer board) (A C TION P IN Type) Part N o.: 1 731 45 Post H ood Part N o.: 1 731 44 R eceptacle A ssem bly (For inner board) (A C TION P IN Type) Part N o.: 1 731 45 Post H eader (S older Type) Part N o.: 1 731 46 P C B oard 1 .6 [.06 2] thickness S tacking D im . R eceptacle + R eceptacle P C B oard 1 .6 [.06 2] thickness S tacking D im . R eceptacle + Post P C B oard 1 .6 [.06 2] thickness M ETRIC Dim ensions are m illim eters over inches

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Post H ood (N on-Interm ateable w ith AM PM OD U C onnectors) N ote: A ll part num bers are R oH S com pliant. Stacking C onnectors, Post H ood The post hood, m ounted onto the post of the interm ediary receptacle assem bly, protects the post and serves as a header assem bly w hen stacking several boards. M aterial B lack glass-filled P B T, 94 V-0 rated Acceptable N o. of D im ensions (See N ote.) Post H ood Post Length Pos. AB C Part N os. 3-17 3144-8 * (For S tacking D im ension) 2 .54 [.100] P itch 2 .54 [.100] 8 .9 [.350] X X B A Y Y C 1 0.0 [.394] 0.75 [.030] H ole D ia. 0.6* [.024] H ole D ia. Section X-X Section Y-Y M ETRIC Dim ensions are m illim eters over inches

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacle Assem blies w ith AC TION PIN Posts and Solder Posts (N on-Interm ateable w ith AM PM OD U C onnectors) N ote: A ll part num bers are R oH S com pliant. Stacking Connectors, Receptacles For Outer B oard Post N o. of D im ensions (See N ote.) Receptacle Type Length Assem bly L Pos. AB Part N os. 26 35.6 [1.402] 30.48 [1.200] 1-17 3145-7 30 40.6 [1.598 ] 35.56 [1.400] 17 3145-2 Post 40 53.3 [2.098 ] 48 .2 6 [1.900] 17 3145-3 50 66.0 [2.598 ] 60.96 [2.400] 17 3145-4 6 0 78 .7 [3.098 ] 73.66 [2.900] 17 3145-5 26 35.6 [1.402] 30.48 [1.200] 2-17 3145-8 30 40.6 [1.598 ] 35.56 [1.400] 2-17 3145-4 34 45.7 [1.7 99] 40.64 [1.6 00] 2-17 3145-9 50 66.0 [2.598 ] 60.96 [2.400] 2-17 3145-6 6 0 78 .7 [3.098 ] 73.66 [2.900] 2-17 3145-7 3-17 3145-0 A fter m ounted receptacle assem bly is on board, dim ension of extrude length from board is 2.6 [.102]. R eceptacle Assem bly for Outer B oard (W ith 0 .55 [.0 2 2 ] Square Post) M aterial and Finish H ousing — B lack glass-filled P B T, C ontacts — C opper alloy, plated 0.0 0 0 2 0 [.0 0 0 0 0 8] gold on contact area and post m ating area, gold flash on A C T ION P IN tail or 0 .0 0 0070 [.000002 7] tin on solder tail, w ith entire contact underplated 0 .0 0 1 30 [.0 0 0050] nickel Application Tooling show n on page 1 62 . PC B oard M ounting D im ensions Thru hole plating C opper 0.02 500-0.05000 [.00098 4-.00196 8 ] L and dia. 1 .4 [.055] M in. B oard Thick 1 .6 [.06 2] Finished hole dia. 0.8 2 5 ±0.05 [.032 ±.002 ] P C B drill hole 0.9 ±0.02 5 [.035 ±.0001 ] ACTIO N PIN Post B oard Thick 1 .6 [.06 2] Finished hole dia. 0.8 ±0.05 [.031 ±.002 ] Solder Post Recom m ended PC Board H ole Layout 7.6 [.300] 2 .54 [.100] P itch 2 .54 [.100] A B Y Y 1 1 .9 [.46 9] 2 .54 [.100] P itch B X X M ating A rea 2 .54 [.100] 2 .54 [.100] 2 .54 [.100] 0.5 [.020] 1 6.5 [.6 50] B lank w idth 0.69** [.027 ] 6.4 [.252] C ontact A rea C ontact A rea 0.5 [.020] 6.4 [.252] 3.7 [.146 ] 0.5 [.020] A C TION P IN A rea L L Section X-X Solder Type 2 .54 ±0.1 [.100 ±.004 ] 2 .54 ±0.1 [.100 ±.004 ] B ±0.1 [±.004] Section X-X ACTIO N PIN Type Section Y-Y 3.7 [.146 ] M ETRIC Dim ensions are m illim eters over inches

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacle Assem blies w ith AC TION PIN Posts (N on-Interm ateable w ith AM PM OD U C onnectors) N ote: A ll part num bers are R oH S com pliant. Stacking C onnectors, R eceptacles Stacking Post N o. of D im ensions (See N ote.) Receptacle Length Assem bly D im ensions L Pos. AB Part N os. 30 40.6 [1.598 ] 35.56 [1.400] 3-17 3145-2 34 45.7 [1.7 99] 40.64 [1.6 00] 3-17 3145-7 .350 3-17 3145-1* 50 66.0 [2.598 ] 60.96 [2.400] 3-17 3145-4 26 35.6 [1.402] 30.48 [1.200] 1-17 3145-9 30 40.6 [1.598 ] 35.56 [1.400] 17 3145-7 50 66.0 [2.598 ] 60.96 [2.400] 17 3145-9 6 0 78 .7 [3.098 ] 73.66 [2.900] 1-17 3145-0 R eceptacle Assem bly for Inner B oard (W ith 0 .55 [.0 2 2 ] Square Post) M aterial and Finish H ousing — B lack glass-filled P B T, C ontacts — C opper alloy, plated 0.0 0 0 2 0 [.0 0 0 0 0 8] gold on contact area and post m ating area, gold flash on A C T ION P IN tail or 0 .0 0 0070 [.000002 7] tin on solder tail, w ith entire contact underplated 0 .0 0 1 30 [.0 0 0050] nickel Application Tooling show n on page 1 62 . PC B oard M ounting D im ensions Thru hole plating C opper 0.02 500-0.05000 [.00098 4-.00196 8 ] L and dia. 1 .4 [.055] M in. B oard Thick 1 .6 [.06 2] Finished hole dia. 0.8 2 5 ±0.05 [.032 ±.002 ] P C B drill hole 0.9 ±0.02 5 [.035 ±.0001 ] Recom m ended PC Board H ole Layout 7.6 [.300] 2 .54 [.100] P itch 2 .54 [.100] A B Y Y 1 1 .9 [.46 9] 2 .54 [.100] P itch B X X M ating A rea 2 .54 [.100] 6.4 [.252] C ontact A rea 0.5 [.020] A C TION P IN A rea L Section X-X 2 .54±0.1 [.100±.004] 2 .54±0.1 [.100±.004] B ±0.1 [±.004] 3.7 [.146 ] Section Y-Y For Inner B oard M ETRIC Dim ensions are m illim eters over inches

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacle Assem blies w ith AC TION PIN Posts (N on-Interm ateable w ith AM PM OD U C onnectors) (Continued) N ote: A ll part num bers are R oH S com pliant. Stacking Connectors, Receptacles Stacking Post N o. of D im ensions (See N ote.) Receptacle Length Assem bly D im ensions L Pos. AB Part N os. 26 35.6 [1.402] 30.48 [1.200] 4-17 3145-2 30 40.6 [1.598 ] 35.56 [1.400] 3-17 3145-8 1 4.5 [.57 1] 34 45.7 [1.7 99] 40.64 [1.6 00] 4-17 3145-3 40 53.3 [2.098 ] 48 .2 6 [1.900] 3-17 3145-9 50 66.0 [2.598 ] 60.96 [2.400] 4-17 3145-0 26 35.6 [1.402] 30.48 [1.200] 2-17 3145-1 30 40.6 [1.598 ] 35.56 [1.400] 1-17 3145-2 40 53.3 [2.098 ] 48 .2 6 [1.900] 1-17 3145-3 50 66.0 [2.598 ] 60.96 [2.400] 1-17 3145-4 6 0 78 .7 [3.098 ] 73.66 [2.900] 1-17 3145-5 For Inner B oard (Continued) M ETRIC Dim ensions are m illim eters over inches

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Post H eaders w ith Solder Posts (N on-Interm ateable w ith AM PM OD U C onnectors) N ote: A ll part num bers are R oH S com pliant. Stacking C onnector Post H eaders Stacking Post N o. of D im ensions (See N ote.) Part N os. of Length Post H eader D im ensions L Pos. AB C Assem bly 3-17 3146 -0* 4-17 3146 -3* Post H eader (W ith 0 .55 [.0 2 2 ] Square Post) M aterial and Finish H ousing — B lack glass-filled P B T, Posts — C opper alloy, plated 0.0002 0 [.0 0 0 0 0 8] gold on contact area, 0.0 0 0 0 70 [.0 0 0 0 0 2 7] m in. tin on solder tail, w ith entire post underplated 0.0 0 1 30 [.0 0 0 0 50 ] nickel PC B oard M ounting D im ensions B oard Thick 1 .6 [.06 2] Finished hole dia. 0.8 ±0.06 [.031 ±.002 ] Recom m ended PC Board H ole Layout 8 .9 [.350] 2 .54 [.100] P itch 2 .54 [.100] A B Y Y X X 8 .5 [.335] 0.5 [.020] C Section X-X 2 .54±0.1 [.100±.004] 2 .54±0.1 [.100±.004] B ±0.1 [±.004] 3.7 [.146 ] B L Section Y-Y 2 .54 [.100] P itch M ETRIC Dim ensions are m illim eters over inches

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Post H eaders w ith Solder Posts (N on-Interm ateable w ith AM PM OD U C onnectors) (Continued) N ote: A ll part num bers are R oH S com pliant. Stacking Connector Post Headers Stacking Post N o. of D im ensions (See N ote.) Part N os. of Length Post H eader D im ensions L Pos. AB C Assem bly M ETRIC Dim ensions are m illim eters over inches

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for AC TION PIN Stacking C onnectors N ote: A ll part num bers are R oH S com pliant. Application Tooling for AC TION PIN Stacking C onnectors M ini-Press N o. of Part N o. Pos. 40 1-7 58 030-1 50 1-7 58 030-2 6 0 1-7 58 030-3 The part num bers above include the M ini-Press unit, insertion support plate and press-fit jig. M ini-Press Unit Part N o. 1-7580 30 -3 W hen ordering a press-fit jig only, consult the table below. Press-fit J ig (separate order) N o. of Part N o. Pos. 26 907 459-1 30 907 459-2 34 907 459-3 40 907 459-4 50 907 459-5 6 0 907 459-6 A lso, optional insertion support plates are obtainable by separate order to m eet your specific requirem ents for im proved board handling. 1. Insert connector into the board tentatively (B e sure that connector is in the right direction). 2. A ttach insertion support plate to the leg portion of con - nector from below. 3. S et insertion support plate in place by butting it against M ini-P ress platform . 4. B y pressing M ini-P ress handle dow n, rest the press-fit jig against connector. 5. P ress handle dow n gently and insert connector into the board. 6 . N ow connector has been m ounted to the board securely. Insertion Support U nit (Option)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System .0 2 5 [0 .64] Square Posts N ote: A ll part num bers are R oH S com pliant. Square Posts Bandolier and Strip Form D im ensions Post Plating/Part N os. Post/Tab AB C Plating A Plating B Plating C Plating D Insertion H ead N otes: 1. A pproxim ate Posts per reel— 20,000. *Point of m easurem ent for plating thickness. 2. Other post lengths are available, consult TE. 3. The Post/Tab Insertion H ead can be used on the C om p-U -S ertor II m achine or the M odular Insertion S ystem B ench m achine (see page 153). 4. For P C B finishes other than tin, contact TE. D im ensions Post Plating/Part N os. Bandolier A BCD Plating A Plating B Plating C Insertion H ead N otes: 1. Posts can be applied using H and Tool 91 41 9-1 . *Point of m easurem ent for plating thickness. 2. A pproxim ate posts per reel— 30,000. 3. The B andolier Insertion head can be used on the C om p-U -S ertor II m achine or the M odular Insertion S ystem B ench m achine (see page 153). 4. For P C B finishes other than tin, contact TE. M aterial and Finish B andolier — B rass Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .0 0 0 0 30 [0.00076] gold on contact area, .0 0 0 1 0 0 - .0 002 00 [0.002 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel Plating B — D uplex plated .0 0 0 0 1 5 [0.00038] gold on contact area, .0 0 0 1 0 0 - .0 002 00 [0.002 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel Plating C — .0001 00-.000 2 0 0 [0 .0 0 2 54 - 0.00508] tin over .000050 [0 .0 0 1 2 7] nickel on entire post R elated Product D ata M ateable C onnectors — R efer to the M ating P ost S election G uide — page 90 Accessories E nd Shrouds — page 2 0 3 Application Tooling — page 1 53 Technical D ocum ents — page 2 76 S ee m ating connector for applicable product and application specifications. Strip Form Posts (Uninsulated) M aterial and Finish Posts — Phosphor bronze, plated as follow s: Plating A — D uplex plated .0 0 0 0 30 [0.00076] gold on contact area, .0 0 0 1 0 0 - .0 002 00 [0.002 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel Plating B — D uplex plated .0 0 0 0 1 5 [0.00038] gold on contact area, .0 0 0 1 0 0 - .0 002 00 [0.002 54 -0.00508] tin on solder area, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel Plating C — .000030 [0.00076] gold over .000050 [0.001 2 7] nickel on entire post Plating D — .0001 00-.00 0 2 0 0 [0 .0 0 2 54 - 0.00508] tin over .000050 [0 .0 0 1 2 7] nickel on entire post B andolier Posts (Uninsulated) .02 0 [0.51] A C B L ocalized Tin P late A rea L ocalized G old P late A rea B C A CL of S tar .02 0 [0.51] Typ. .048 +.006 .06 0 -.003 1.22 +0.15 -0.08 [ ] .097 [2.46 ] M ax. .1 00* [2.54] .1 00 [2.54] .1 00 [2.54] .070 [1.7 8 ] B andolier Post .01 0 [0.25] Typ. .01 0 [0.25] .01 5 [0.38 ] C ustom er B oard P C Pad .036±.002 [0.91±0.05] R ecom m ended P lated H ole S ize for Tin P lated Through H ole Typ. .050 [1.27 ] .1 00 [2.54] .042 [1.07 ] .1 00* [2.54] C ustom er B oard P C Pad D ±.002 [±0.05] R ecom m ended P lated H ole S ize for Tin P lated Through H ole D ia. .08 0 [2.03]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U .0 2 5 [0 .64] Square C ontinuous Posts .0 2 5 Square C ontinuous Posts TE now offers A M PM O D U .0 25 [0 .64] Square C ontinuous Posts. These posts can be used instead of the original posts that com e on a bandolier style carrier strip. These posts are on a reel, but the posts are ‘notched’ at the desired length (no carrier strip is needed). This feature allow s m ore versatility by providing post lengths from .40 0 to 1 .0 0 0 [1 0 .1 6 to 25.40 ], available in increm ents of .0 1 0 [0 .25]. The posts are brass draw n w ire and are inserted into a printed circuit board via application tooling at any centerline configuration. They can be used for w ire w rap applications or m ated to a receptacle. The current rating is 3 am ps. The posts are available plated w ith tin, 1 5µ in. gold, or 3 0 µ in. gold. O ther plat - ings are available upon request. TE application tooling is a m odular head (Part N um ber 90 4641 -1 ) placed on the M odular Insertion System B ench M achine (Part N um ber 21 760 0 -1 .) Features of .0 2 5 [0 .64] Square C ontinuous Posts I B rass draw n w ire for posts I .40 0 to 1.0 0 0 [10 .16 to 2 5.40 ] overall pin length (.0 10 [0 .2 5] increm ents) I Plating Options: Tin 15µ in. gold 30 µ in. gold I Star feature also available B enefits I Less expensive than bandolier style posts I C an be placed on printed circuit boards at any desired centerline I Less scrap m aterial (no carrier strip) Technical D ocum ents — page 2 76 Application Specification 1 1 4 -1 30 1 1 N ote: A ll part num bers are R oH S com pliant.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U .0 2 5 [0 .64] Square C ontinuous Posts (Continued) N ote: A ll part num bers are R oH S com pliant. .025 Square Continuous Posts Pre-Plated Tin Part N um ber D escription Square Square w ith Star Post Length 147 333-1 147 433-1 0.400 [10.16 ] 147 333-2 147 433-2 0.410 [10.41] 147 333-3 147 433-3 0.420 [10.6 7 ] 147 333-4 147 433-4 0.430 [10.92] 147 333-5 147 433-5 0.440 [11.18 ] 147 333-6 147 433-6 0.450 [11.43] 147 333-7 147 433-7 0.46 0 [11.6 8 ] 147 333-8 147 433-8 0.47 0 [11.94] 147 333-9 147 433-9 0.48 0 [12.19] 1-147 333-0 1-147 433-0 0.490 [12.45] 1-147 333-1 1-147 433-1 0.500 [12.7 0] 1-147 333-2 1-147 433-2 0.510 [12.95] 1-147 333-3 1-147 433-3 0.520 [13.21] 1-147 333-4 1-147 433-4 0.530 [13.46 ] 1-147 333-5 1-147 433-5 0.540 [13.7 2] 1-147 333-6 1-147 433-6 0.550 [13.97 ] 1-147 333-7 1-147 433-7 0.56 0 [14.22] 1-147 333-8 1-147 433-8 0.57 0 [14.48 ] 1-147 333-9 1-147 433-9 0.58 0 [14.7 3] 2-147 333-0 2-147 433-0 0.590 [14.99] 2-147 333-1 2-147 433-1 0.6 00 [15.24] Part N um ber D escription Square Square w ith Star Post Length 2-147 333-2 2-147 433-2 0.6 10 [15.49] 2-147 333-3 2-147 433-3 0.6 20 [15.7 5] 2-147 333-4 2-147 433-4 0.6 30 [16 .00] 2-147 333-5 2-147 433-5 0.6 40 [16 .26 ] 2-147 333-6 2-147 433-6 0.6 50 [16 .51] 2-147 333-7 2-147 433-7 0.6 6 0 [16 .7 6 ] 2-147 333-8 2-147 433-8 0.6 7 0 [17 .02] 2-147 333-9 2-147 433-9 0.6 8 0 [17 .27 ] 3-147 333-0 3-147 433-0 0.6 90 [17 .53] 3-147 333-1 3-147 433-1 0.7 00 [17 .7 8 ] 3-147 333-2 3-147 433-2 0.7 10 [18 .03] 3-147 333-3 3-147 433-3 0.7 20 [18 .29] 3-147 333-4 3-147 433-4 0.7 30 [18 .54] 3-147 333-5 3-147 433-5 0.7 40 [18 .8 0] 3-147 333-6 3-147 433-6 0.7 50 [19.05] 3-147 333-7 3-147 433-7 0.7 6 0 [19.30] 3-147 333-8 3-147 433-8 0.7 7 0 [19.56 ] 3-147 333-9 3-147 433-9 0.7 8 0 [19.8 1] 4-147 333-0 4-147 433-0 0.7 90 [20.07 ] 4-147 333-1 4-147 433-1 0.8 00 [20.32] 4-147 333-2 4-147 433-2 0.8 10 [20.57 ] Part N um ber D escription Square Square w ith Star Post Length 4-147 333-3 4-147 433-3 0.8 20 [20.8 3] 4-147 333-4 4-147 433-4 0.8 30 [21.08 ] 4-147 333-5 4-147 433-5 0.8 40 [21.34] 4-147 333-6 4-147 433-6 0.8 50 [21.59] 4-147 333-7 4-147 433-7 0.8 6 0 [21.8 4] 4-147 333-8 4-147 433-8 0.8 7 0 [22.10] 4-147 333-9 4-147 433-9 0.8 8 0 [22.35] 5-147 333-0 5-147 433-0 0.8 90 [22.6 1] 5-147 333-1 5-147 433-1 0.900 [22.8 6 ] 5-147 333-2 5-147 433-2 0.910 [23.11] 5-147 333-3 5-147 433-3 0.920 [23.37 ] 5-147 333-4 5-147 433-4 0.930 [23.6 2] 5-147 333-5 5-147 433-5 0.940 [23.8 8 ] 5-147 333-6 5-147 433-6 0.950 [24.13] 5-147 333-7 5-147 433-7 0.96 0 [24.38 ] 5-147 333-8 5-147 433-8 0.97 0 [24.6 4] 5-147 333-9 5-147 433-9 0.98 0 [24.8 9] 6 -147 333-0 6 -147 433-0 0.990 [25.15] 6 -147 333-1 6 -147 433-1 1.000 [25.40] Pre-Plated 15µ in. Gold Part N um ber D escription Square Square w ith Star Post Length 147 334-1 147 434-1 0.400 [10.16 ] 147 334-2 147 434-2 0.410 [10.41] 147 334-3 147 434-3 0.420 [10.6 7 ] 147 334-4 147 434-4 0.430 [10.92] 147 334-5 147 434-5 0.440 [11.18 ] 147 334-6 147 434-6 0.450 [11.43] 147 334-7 147 434-7 0.46 0 [11.6 8 ] 147 334-8 147 434-8 0.47 0 [11.94] 147 334-9 147 434-9 0.48 0 [12.19] 1-147 334-0 1-147 434-0 0.490 [12.45] 1-147 334-1 1-147 434-1 0.500 [12.7 0] 1-147 334-2 1-147 434-2 0.510 [12.95] 1-147 334-3 1-147 434-3 0.520 [13.21] 1-147 334-4 1-147 434-4 0.530 [13.46 ] 1-147 334-5 1-147 434-5 0.540 [13.7 2] 1-147 334-6 1-147 434-6 0.550 [13.97 ] 1-147 334-7 1-147 434-7 0.56 0 [14.22] 1-147 334-8 1-147 434-8 0.57 0 [14.48 ] 1-147 334-9 1-147 434-9 0.58 0 [14.7 3] 2-147 334-0 2-147 434-0 0.590 [14.99] 2-147 334-1 2-147 434-1 0.6 00 [15.24] Part N um ber D escription Square Square w ith Star Post Length 2-147 334-2 2-147 434-2 0.6 10 [15.49] 2-147 334-3 2-147 434-3 0.6 20 [15.7 5] 2-147 334-4 2-147 434-4 0.6 30 [16 .00] 2-147 334-5 2-147 434-5 0.6 40 [16 .26 ] 2-147 334-6 2-147 434-6 0.6 50 [16 .51] 2-147 334-7 2-147 434-7 0.6 6 0 [16 .7 6 ] 2-147 334-8 2-147 434-8 0.6 7 0 [17 .02] 2-147 334-9 2-147 434-9 0.6 8 0 [17 .27 ] 3-147 334-0 3-147 434-0 0.6 90 [17 .53] 3-147 334-1 3-147 434-1 0.7 00 [17 .7 8 ] 3-147 334-2 3-147 434-2 0.7 10 [18 .03] 3-147 334-3 3-147 434-3 0.7 20 [18 .29] 3-147 334-4 3-147 434-4 0.7 30 [18 .54] 3-147 334-5 3-147 434-5 0.7 40 [18 .8 0] 3-147 334-6 3-147 434-6 0.7 50 [19.05] 3-147 334-7 3-147 434-7 0.7 6 0 [19.30] 3-147 334-8 3-147 434-8 0.7 7 0 [19.56 ] 3-147 334-9 3-147 434-9 0.7 8 0 [19.8 1] 4-147 334-0 4-147 434-0 0.7 90 [20.07 ] 4-147 334-1 4-147 434-1 0.8 00 [20.32] 4-147 334-2 4-147 434-2 0.8 10 [20.57 ] Part N um ber D escription Square Square w ith Star Post Length 4-147 334-3 4-147 434-3 0.8 20 [20.8 3] 4-147 334-4 4-147 434-4 0.8 30 [21.08 ] 4-147 334-5 4-147 434-5 0.8 40 [21.34] 4-147 334-6 4-147 434-6 0.8 50 [21.59] 4-147 334-7 4-147 434-7 0.8 6 0 [21.8 4] 4-147 334-8 4-147 434-8 0.8 7 0 [22.10] 4-147 334-9 4-147 434-9 0.8 8 0 [22.35] 5-147 334-0 5-147 434-0 0.8 90 [22.6 1] 5-147 334-1 5-147 434-1 0.900 [22.8 6 ] 5-147 334-2 5-147 434-2 0.910 [23.11] 5-147 334-3 5-147 434-3 0.920 [23.37 ] 5-147 334-4 5-147 434-4 0.930 [23.6 2] 5-147 334-5 5-147 434-5 0.940 [23.8 8 ] 5-147 334-6 5-147 434-6 0.950 [24.13] 5-147 334-7 5-147 434-7 0.96 0 [24.38 ] 5-147 334-8 5-147 434-8 0.97 0 [24.6 4] 5-147 334-9 5-147 434-9 0.98 0 [24.8 9] 6 -147 334-0 6 -147 434-0 0.990 [25.15] 6 -147 334-1 6 -147 434-1 1.000 [25.40] Pre-Plated 30 µ in. Gold Part N um ber D escription Square Square w ith Star Post Length 147 335-1 147 435-1 0.400 [10.16 ] 147 335-2 147 435-2 0.410 [10.41] 147 335-3 147 435-3 0.420 [10.6 7 ] 147 335-4 147 435-4 0.430 [10.92] 147 335-5 147 435-5 0.440 [11.18 ] 147 335-6 147 435-6 0.450 [11.43] 147 335-7 147 435-7 0.46 0 [11.6 8 ] 147 335-8 147 435-8 0.47 0 [11.94] 147 335-9 147 435-9 0.48 0 [12.19] 1-147 335-0 1-147 435-0 0.490 [12.45] 1-147 335-1 1-147 435-1 0.500 [12.7 0] 1-147 335-2 1-147 435-2 0.510 [12.95] 1-147 335-3 1-147 435-3 0.520 [13.21] 1-147 335-4 1-147 435-4 0.530 [13.46 ] 1-147 335-5 1-147 435-5 0.540 [13.7 2] 1-147 335-6 1-147 435-6 0.550 [13.97 ] 1-147 335-7 1-147 435-7 0.56 0 [14.22] 1-147 335-8 1-147 435-8 0.57 0 [14.48 ] 1-147 335-9 1-147 435-9 0.58 0 [14.7 3] 2-147 335-0 2-147 435-0 0.590 [14.99] 2-147 335-1 2-147 435-1 0.6 00 [15.24] Part N um ber D escription Square Square w ith Star Post Length 2-147 335-2 2-147 435-2 0.6 10 [15.49] 2-147 335-3 2-147 435-3 0.6 20 [15.7 5] 2-147 335-4 2-147 435-4 0.6 30 [16 .00] 2-147 335-5 2-147 435-5 0.6 40 [16 .26 ] 2-147 335-6 2-147 435-6 0.6 50 [16 .51] 2-147 335-7 2-147 435-7 0.6 6 0 [16 .7 6 ] 2-147 335-8 2-147 435-8 0.6 7 0 [17 .02] 2-147 335-9 2-147 435-9 0.6 8 0 [17 .27 ] 3-147 335-0 3-147 435-0 0.6 90 [17 .53] 3-147 335-1 3-147 435-1 0.7 00 [17 .7 8 ] 3-147 335-2 3-147 435-2 0.7 10 [18 .03] 3-147 335-3 3-147 435-3 0.7 20 [18 .29] 3-147 335-4 3-147 435-4 0.7 30 [18 .54] 3-147 335-5 3-147 435-5 0.7 40 [18 .8 0] 3-147 335-6 3-147 435-6 0.7 50 [19.05] 3-147 335-7 3-147 435-7 0.7 6 0 [19.30] 3-147 335-8 3-147 435-8 0.7 7 0 [19.56 ] 3-147 335-9 3-147 435-9 0.7 8 0 [19.8 1] 4-147 335-0 4-147 435-0 0.7 90 [20.07 ] 4-147 335-1 4-147 435-1 0.8 00 [20.32] 4-147 335-2 4-147 435-2 0.8 10 [20.57 ] Part N um ber D escription Square Square w ith Star Post Length 4-147 335-3 4-147 435-3 0.8 20 [20.8 3] 4-147 335-4 4-147 435-4 0.8 30 [21.08 ] 4-147 335-5 4-147 435-5 0.8 40 [21.34] 4-147 335-6 4-147 435-6 0.8 50 [21.59] 4-147 335-7 4-147 435-7 0.8 6 0 [21.8 4] 4-147 335-8 4-147 435-8 0.8 7 0 [22.10] 4-147 335-9 4-147 435-9 0.8 8 0 [22.35] 5-147 335-0 5-147 435-0 0.8 90 [22.6 1] 5-147 335-1 5-147 435-1 0.900 [22.8 6 ] 5-147 335-2 5-147 435-2 0.910 [23.11] 5-147 335-3 5-147 435-3 0.920 [23.37 ] 5-147 335-4 5-147 435-4 0.930 [23.6 2] 5-147 335-5 5-147 435-5 0.940 [23.8 8 ] 5-147 335-6 5-147 435-6 0.950 [24.13] 5-147 335-7 5-147 435-7 0.96 0 [24.38 ] 5-147 335-8 5-147 435-8 0.97 0 [24.6 4] 5-147 335-9 5-147 435-9 0.98 0 [24.8 9] 6 -147 335-0 6 -147 435-0 0.990 [25.15] 6 -147 335-1 6 -147 435-1 1.000 [25.40]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U .0 45 [1.14] Square C ontinuous Posts .0 45 Square C ontinuous Posts TE now offers A M PM O D U .0 45 [1 .1 4] Square C ontinuous Posts. These posts can be used instead of the original posts that com e on a bandolier style carrier strip. These posts are on a reel, but the posts are ‘notched’ at the desired length (no carrier strip is needed). This feature allow s m ore versatility by providing post lengths from .40 0 to 1 .0 0 0 [1 0 .1 6 to 25.40 ], available in increm ents of .0 1 0 [0 .25]. The posts are brass draw n w ire and are inserted into a printed circuit board via application tooling at any centerline configuration. They can be used for w ire w rap applications or m ated to a receptacle. Potential industries include: building system s, com m ercial/hom e equipm ent, household appliances, hom e pow er tools and equipm ent. The current rating is 7 am ps. The posts are available plated w ith tin, 1 5µ in. gold, or 3 0 µ in. gold. O ther plat - ings are available upon request. TE application tooling is a m odular head (Part N um ber 90 4640 -1 ) placed on the M odular Insertion System B ench M achine (Part N um ber 21 760 0 -1 .) Features of .0 45 [1.14] Square C ontinuous Posts I B rass draw n w ire for posts I .40 0 to 1.0 0 0 [10 .16 to 2 5.40 ] overall pin length (.0 10 [0 .2 5] increm ents) I Plating Options: Tin 15µ in. gold 30 µ in. gold I Star feature also available B enefits I Less expensive than bandolier style posts I C an be placed on printed circuit boards at any desired centerline I Less scrap m aterial (no carrier strip) Technical D ocum ents — page 2 76 Application Specification 1 1 4 -1 30 1 1 N ote: A ll part num bers are R oH S com pliant.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U .0 45 [1.14] Square C ontinuous Posts (Continued) N ote: A ll part num bers are R oH S com pliant. .045 Square Continuous Posts Pre-Plated Tin Part N um ber D escription Square Square w ith Star Post Length 147 07 0-1 147 436 -1 0.400 [10.16 ] 147 07 0-2 147 436 -2 0.410 [10.41] 147 07 0-3 147 436 -3 0.420 [10.6 7 ] 147 07 0-4 147 436 -4 0.430 [10.92] 147 07 0-5 147 436 -5 0.440 [11.18 ] 147 07 0-6 147 436 -6 0.450 [11.43] 147 07 0-7 147 436 -7 0.46 0 [11.6 8 ] 147 07 0-8 147 436 -8 0.47 0 [11.94] 147 07 0-9 147 436 -9 0.48 0 [12.19] 1-147 07 0-0 1-147 436 -0 0.490 [12.45] 1-147 07 0-1 1-147 436 -1 0.500 [12.7 0] 1-147 07 0-2 1-147 436 -2 0.510 [12.95] 1-147 07 0-3 1-147 436 -3 0.520 [13.21] 1-147 07 0-4 1-147 436 -4 0.530 [13.46 ] 1-147 07 0-5 1-147 436 -5 0.540 [13.7 2] 1-147 07 0-6 1-147 436 -6 0.550 [13.97 ] 1-147 07 0-7 1-147 436 -7 0.56 0 [14.22] 1-147 07 0-8 1-147 436 -8 0.57 0 [14.48 ] 1-147 07 0-9 1-147 436 -9 0.58 0 [14.7 3] 2-147 07 0-0 2-147 436 -0 0.590 [14.99] 2-147 07 0-1 2-147 436 -1 0.6 00 [15.24] Part N um ber D escription Square Square w ith Star Post Length 2-147 07 0-2 2-147 436 -2 0.6 10 [15.49] 2-147 07 0-3 2-147 436 -3 0.6 20 [15.7 5] 2-147 07 0-4 2-147 436 -4 0.6 30 [16 .00] 2-147 07 0-5 2-147 436 -5 0.6 40 [16 .26 ] 2-147 07 0-6 2-147 436 -6 0.6 50 [16 .51] 2-147 07 0-7 2-147 436 -7 0.6 6 0 [16 .7 6 ] 2-147 07 0-8 2-147 436 -8 0.6 7 0 [17 .02] 2-147 07 0-9 2-147 436 -9 0.6 8 0 [17 .27 ] 3-147 07 0-0 3-147 436 -0 0.6 90 [17 .53] 3-147 07 0-1 3-147 436 -1 0.7 00 [17 .7 8 ] 3-147 07 0-2 3-147 436 -2 0.7 10 [18 .03] 3-147 07 0-3 3-147 436 -3 0.7 20 [18 .29] 3-147 07 0-4 3-147 436 -4 0.7 30 [18 .54] 3-147 07 0-5 3-147 436 -5 0.7 40 [18 .8 0] 3-147 07 0-6 3-147 436 -6 0.7 50 [19.05] 3-147 07 0-7 3-147 436 -7 0.7 6 0 [19.30] 3-147 07 0-8 3-147 436 -8 0.7 7 0 [19.56 ] 3-147 07 0-9 3-147 436 -9 0.7 8 0 [19.8 1] 4-147 07 0-0 4-147 436 -0 0.7 90 [20.07 ] 4-147 07 0-1 4-147 436 -1 0.8 00 [20.32] 4-147 07 0-2 4-147 436 -2 0.8 10 [20.57 ] Part N um ber D escription Square Square w ith Star Post Length 4-147 07 0-3 4-147 436 -3 0.8 20 [20.8 3] 4-147 07 0-4 4-147 436 -4 0.8 30 [21.08 ] 4-147 07 0-5 4-147 436 -5 0.8 40 [21.34] 4-147 07 0-6 4-147 436 -6 0.8 50 [21.59] 4-147 07 0-7 4-147 436 -7 0.8 6 0 [21.8 4] 4-147 07 0-8 4-147 436 -8 0.8 7 0 [22.10] 4-147 07 0-9 4-147 436 -9 0.8 8 0 [22.35] 5-147 07 0-0 5-147 436 -0 0.8 90 [22.6 1] 5-147 07 0-1 5-147 436 -1 0.900 [22.8 6 ] 5-147 07 0-2 5-147 436 -2 0.910 [23.11] 5-147 07 0-3 5-147 436 -3 0.920 [23.37 ] 5-147 07 0-4 5-147 436 -4 0.930 [23.6 2] 5-147 07 0-5 5-147 436 -5 0.940 [23.8 8 ] 5-147 07 0-6 5-147 436 -6 0.950 [24.13] 5-147 07 0-7 5-147 436 -7 0.96 0 [24.38 ] 5-147 07 0-8 5-147 436 -8 0.97 0 [24.6 4] 5-147 07 0-9 5-147 436 -9 0.98 0 [24.8 9] 6 -147 07 0-0 6 -147 436 -0 0.990 [25.15] 6 -147 07 0-1 6 -147 436 -1 1.000 [25.40] Pre-Plated 15µ in. Gold Part N um ber D escription Square Square w ith Star Post Length 147 07 1-1 147 437 -1 0.400 [10.16 ] 147 07 1-2 147 437 -2 0.410 [10.41] 147 07 1-3 147 437 -3 0.420 [10.6 7 ] 147 07 1-4 147 437 -4 0.430 [10.92] 147 07 1-5 147 437 -5 0.440 [11.18 ] 147 07 1-6 147 437 -6 0.450 [11.43] 147 07 1-7 147 437 -7 0.46 0 [11.6 8 ] 147 07 1-8 147 437 -8 0.47 0 [11.94] 147 07 1-9 147 437 -9 0.48 0 [12.19] 1-147 07 1-0 1-147 437 -0 0.490 [12.45] 1-147 07 1-1 1-147 437 -1 0.500 [12.7 0] 1-147 07 1-2 1-147 437 -2 0.510 [12.95] 1-147 07 1-3 1-147 437 -3 0.520 [13.21] 1-147 07 1-4 1-147 437 -4 0.530 [13.46 ] 1-147 07 1-5 1-147 437 -5 0.540 [13.7 2] 1-147 07 1-6 1-147 437 -6 0.550 [13.97 ] 1-147 07 1-7 1-147 437 -7 0.56 0 [14.22] 1-147 07 1-8 1-147 437 -8 0.57 0 [14.48 ] 1-147 07 1-9 1-147 437 -9 0.58 0 [14.7 3] 2-147 07 1-0 2-147 437 -0 0.590 [14.99] 2-147 07 1-1 2-147 437 -1 0.6 00 [15.24] Part N um ber D escription Square Square w ith Star Post Length 2-147 07 1-2 2-147 437 -2 0.6 10 [15.49] 2-147 07 1-3 2-147 437 -3 0.6 20 [15.7 5] 2-147 07 1-4 2-147 437 -4 0.6 30 [16 .00] 2-147 07 1-5 2-147 437 -5 0.6 40 [16 .26 ] 2-147 07 1-6 2-147 437 -6 0.6 50 [16 .51] 2-147 07 1-7 2-147 437 -7 0.6 6 0 [16 .7 6 ] 2-147 07 1-8 2-147 437 -8 0.6 7 0 [17 .02] 2-147 07 1-9 2-147 437 -9 0.6 8 0 [17 .27 ] 3-147 07 1-0 3-147 437 -0 0.6 90 [17 .53] 3-147 07 1-1 3-147 437 -1 0.7 00 [17 .7 8 ] 3-147 07 1-2 3-147 437 -2 0.7 10 [18 .03] 3-147 07 1-3 3-147 437 -3 0.7 20 [18 .29] 3-147 07 1-4 3-147 437 -4 0.7 30 [18 .54] 3-147 07 1-5 3-147 437 -5 0.7 40 [18 .8 0] 3-147 07 1-6 3-147 437 -6 0.7 50 [19.05] 3-147 07 1-7 3-147 437 -7 0.7 6 0 [19.30] 3-147 07 1-8 3-147 437 -8 0.7 7 0 [19.56 ] 3-147 07 1-9 3-147 437 -9 0.7 8 0 [19.8 1] 4-147 07 1-0 4-147 437 -0 0.7 90 [20.07 ] 4-147 07 1-1 4-147 437 -1 0.8 00 [20.32] 4-147 07 1-2 4-147 437 -2 0.8 10 [20.57 ] Part N um ber D escription Square Square w ith Star Post Length 4-147 07 1-3 4-147 437 -3 0.8 20 [20.8 3] 4-147 07 1-4 4-147 437 -4 0.8 30 [21.08 ] 4-147 07 1-5 4-147 437 -5 0.8 40 [21.34] 4-147 07 1-6 4-147 437 -6 0.8 50 [21.59] 4-147 07 1-7 4-147 437 -7 0.8 6 0 [21.8 4] 4-147 07 1-8 4-147 437 -8 0.8 7 0 [22.10] 4-147 07 1-9 4-147 437 -9 0.8 8 0 [22.35] 5-147 07 1-0 5-147 437 -0 0.8 90 [22.6 1] 5-147 07 1-1 5-147 437 -1 0.900 [22.8 6 ] 5-147 07 1-2 5-147 437 -2 0.910 [23.11] 5-147 07 1-3 5-147 437 -3 0.920 [23.37 ] 5-147 07 1-4 5-147 437 -4 0.930 [23.6 2] 5-147 07 1-5 5-147 437 -5 0.940 [23.8 8 ] 5-147 07 1-6 5-147 437 -6 0.950 [24.13] 5-147 07 1-7 5-147 437 -7 0.96 0 [24.38 ] 5-147 07 1-8 5-147 437 -8 0.97 0 [24.6 4] 5-147 07 1-9 5-147 437 -9 0.98 0 [24.8 9] 6 -147 07 1-0 6 -147 437 -0 0.990 [25.15] 6 -147 07 1-1 6 -147 437 -1 1.000 [25.40] Pre-Plated 30 µ in. Gold Part N um ber D escription Square Square w ith Star Post Length 147 07 2-1 147 438 -1 0.400 [10.16 ] 147 07 2-2 147 438 -2 0.410 [10.41] 147 07 2-3 147 438 -3 0.420 [10.6 7 ] 147 07 2-4 147 438 -4 0.430 [10.92] 147 07 2-5 147 438 -5 0.440 [11.18 ] 147 07 2-6 147 438 -6 0.450 [11.43] 147 07 2-7 147 438 -7 0.46 0 [11.6 8 ] 147 07 2-8 147 438 -8 0.47 0 [11.94] 147 07 2-9 147 438 -9 0.48 0 [12.19] 1-147 07 2-0 1-147 438 -0 0.490 [12.45] 1-147 07 2-1 1-147 438 -1 0.500 [12.7 0] 1-147 07 2-2 1-147 438 -2 0.510 [12.95] 1-147 07 2-3 1-147 438 -3 0.520 [13.21] 1-147 07 2-4 1-147 438 -4 0.530 [13.46 ] 1-147 07 2-5 1-147 438 -5 0.540 [13.7 2] 1-147 07 2-6 1-147 438 -6 0.550 [13.97 ] 1-147 07 2-7 1-147 438 -7 0.56 0 [14.22] 1-147 07 2-8 1-147 438 -8 0.57 0 [14.48 ] 1-147 07 2-9 1-147 438 -9 0.58 0 [14.7 3] 2-147 07 2-0 2-147 438 -0 0.590 [14.99] 2-147 07 2-1 2-147 438 -1 0.6 00 [15.24] Part N um ber D escription Square Square w ith Star Post Length 2-147 07 2-2 2-147 438 -2 0.6 10 [15.49] 2-147 07 2-3 2-147 438 -3 0.6 20 [15.7 5] 2-147 07 2-4 2-147 438 -4 0.6 30 [16 .00] 2-147 07 2-5 2-147 438 -5 0.6 40 [16 .26 ] 2-147 07 2-6 2-147 438 -6 0.6 50 [16 .51] 2-147 07 2-7 2-147 438 -7 0.6 6 0 [16 .7 6 ] 2-147 07 2-8 2-147 438 -8 0.6 7 0 [17 .02] 2-147 07 2-9 2-147 438 -9 0.6 8 0 [17 .27 ] 3-147 07 2-0 3-147 438 -0 0.6 90 [17 .53] 3-147 07 2-1 3-147 438 -1 0.7 00 [17 .7 8 ] 3-147 07 2-2 3-147 438 -2 0.7 10 [18 .03] 3-147 07 2-3 3-147 438 -3 0.7 20 [18 .29] 3-147 07 2-4 3-147 438 -4 0.7 30 [18 .54] 3-147 07 2-5 3-147 438 -5 0.7 40 [18 .8 0] 3-147 07 2-6 3-147 438 -6 0.7 50 [19.05] 3-147 07 2-7 3-147 438 -7 0.7 6 0 [19.30] 3-147 07 2-8 3-147 438 -8 0.7 7 0 [19.56 ] 3-147 07 2-9 3-147 438 -9 0.7 8 0 [19.8 1] 4-147 07 2-0 4-147 438 -0 0.7 90 [20.07 ] 4-147 07 2-1 4-147 438 -1 0.8 00 [20.32] 4-147 07 2-2 4-147 438 -2 0.8 10 [20.57 ] Part N um ber D escription Square Square w ith Star Post Length 4-147 07 2-3 4-147 438 -3 0.8 20 [20.8 3] 4-147 07 2-4 4-147 438 -4 0.8 30 [21.08 ] 4-147 07 2-5 4-147 438 -5 0.8 40 [21.34] 4-147 07 2-6 4-147 438 -6 0.8 50 [21.59] 4-147 07 2-7 4-147 438 -7 0.8 6 0 [21.8 4] 4-147 07 2-8 4-147 438 -8 0.8 7 0 [22.10] 4-147 07 2-9 4-147 438 -9 0.8 8 0 [22.35] 5-147 07 2-0 5-147 438 -0 0.8 90 [22.6 1] 5-147 07 2-1 5-147 438 -1 0.900 [22.8 6 ] 5-147 07 2-2 5-147 438 -2 0.910 [23.11] 5-147 07 2-3 5-147 438 -3 0.920 [23.37 ] 5-147 07 2-4 5-147 438 -4 0.930 [23.6 2] 5-147 07 2-5 5-147 438 -5 0.940 [23.8 8 ] 5-147 07 2-6 5-147 438 -6 0.950 [24.13] 5-147 07 2-7 5-147 438 -7 0.96 0 [24.38 ] 5-147 07 2-8 5-147 438 -8 0.97 0 [24.6 4] 5-147 07 2-9 5-147 438 -9 0.98 0 [24.8 9] 6 -147 07 2-0 6 -147 438 -0 0.990 [25.15] 6 -147 07 2-1 6 -147 438 -1 1.000 [25.40]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacle Assem blies, H orizontal M ount H orizontal M ount, R eceptacle Assem blies Product Facts I All receptacle assem blies are end stackable I C ontact design em ploys dual cantilever beam s w ith built-in anti-overstress feature I C losed entry housings help prevent post stubbing I W ide range of sizes available I Other versions available upon request I H ousings m ade of high tem perature, surface m ount com patible therm oplastic m aterial, 94V-O rated I D uplex gold and m atte tin plated contacts have full nickel underplate I H ousings feature PC board standoffs I Solder tails accom m odate a PC board thickness of .0 62 [1.57] I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 Perform ance C haracteristics M echanical C haracteristics M ating Force — 6.0 oz. [1 .67N] per contact (m ax.) Unm ating Force — .75 oz. [0 .2 1 N] per contact (m in.) during third m ating cycle D urability — 2 00 cycles E nvironm ental C haracteristics Operating Tem perature — -65°C to + 1 2 5°C E lectrical C haracteristics C urrent R ating — 3.0 am peres (m ax.) for single contact; 2 .0 am peres (m ax.) per contact w hen connector is fully energized C ontact R esistance — 1 2 m illiohm s (m ax.) Insulation R esistance — 50 0 0 m egohm s (m in.) betw een adjacent contacts D ielectric W ithstanding Voltage (at sea level) — 750 V rm s Horizontal M ount receptacle assem blies are designed to reliably and econom ically m eet the packaging and interconnection require - m ents of today’s electronics industry, generally for appli - cations using the m other/daughter board arrangem ent. This product line is offered in both single and double row configurations. The .1 0 0 [2.54] centerline assem blies are available in a w ide range of position sizes. They have end stacking capability w hich gives the added advantage of flexibility. The housings are m ade of high tem perature, surface m ount com patible therm o - plastic m aterial that is 94V-0 rated. C ontacts are phos - phor bronze, fully under - plated w ith nickel to help prevent corrosion and are available in three plating options. The receptacle contact is an established proven design w ith a fully enclosed, one-piece “box” to protect the contact area. In addition, the receptacle contact has dual cantilever beam s w ith a built-in anti-overstress feature. Standard solder tails accom m odate a board thickness of .0 62 [1 .57]. R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od II R eceptacle Assem blies, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Horizontal Mount, Receptacle Assemblies .32 0 [8 .13] A B .050 [1.27 ] (2 P lc.) .069 [1.7 5] .1 00 [2.54] Typ. .1 37 [3.48 ] Pos. R ef. 1 2 .1 1 5 [2.92] Post Entry .1 2 5 [3.18 ] .31 0 [7 .8 7 ] .1 74 M ax. [4.42] (Point-of-C ontact) (L ocalized G old P late A rea) CL CL B .1 00* Typ. [2.54] P C B oard (R ef.) Recom m ended PC Board H ole Layout (for .062 [1 .57] thick PC board) .035 ±.003 [0.8 9 ±0.08 ] .060 +.005 .06 0 -.000 1.52 +.0.13 -.000 .31 0 [7 .8 7 ] [ ] D ia. Typ. N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 2 .2 00 [5.08 ] .1 00 [2.54] 55356 7 6 -1 5146 139-1 55356 7 7 -1 3 .300 [7 .6 2] .2 00 [5.08 ] 55356 7 6 -2 5146 139-2 55356 7 7 -2 4 .400 [10.16 ] .300 [7 .6 2] 55356 7 6 -3 5146 139-3 55356 7 7 -3 5 .500 [12.7 0] .400 [10.16 ] 55356 7 6 -4 5146 139-4 55356 7 7 -4 6 .600 [15.24] .500 [12.7 0] 55356 7 6 -5 5146 139-5 55356 7 7 -5 7 .700 [17 .7 8 ] .600 [15.24] 55356 7 6 -6 5146 139-6 55356 7 7 -6 8 .8 00 [20.32] .700 [17 .7 8 ] 55356 7 6 -7 5146 139-7 55356 7 7 -7 9 .900 [22.8 6 ] .8 00 [20.32] 55356 7 6 -8 5146 139-8 55356 7 7 -8 10 1 .000 [25.40] .900 [22.8 6 ] 55356 7 6 -9 5146 139-9 55356 7 7 -9 11 1 .1 00 [27 .94] 1 .000 [25.40] 1-55356 7 6 -0 1-5146 139-0 1-55356 7 7 -0 12 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 1-55356 7 6 -1 1-5146 139-1 1-55356 7 7 -1 13 1 .300 [33.02] 1 .2 00 [30.48 ] 1-55356 7 6 -2 1-5146 139-2 1-55356 7 7 -2 14 1 .400 [35.56 ] 1 .300 [33.02] 1-55356 7 6 -3 1-5146 139-3 1-55356 7 7 -3 15 1 .500 [38 .10] 1 .400 [35.56 ] 1-55356 7 6 -4 1-5146 139-4 1-55356 7 7 -4 16 1 .600 [40.6 4] 1 .500 [38 .10] 1-55356 7 6 -5 1-5146 139-5 1-55356 7 7 -5 17 1 .700 [43.18 ] 1 .600 [40.6 4] 1-55356 7 6 -6 1-5146 139-6 1-55356 7 7 -6 18 1 .8 00 [45.7 2] 1 .700 [43.18 ] 1-55356 7 6 -7 1-5146 139-7 1-55356 7 7 -7 19 1 .900 [48 .26 ] 1 .8 00 [45.7 2] 1-55356 7 6 -8 1-5146 139-8 1-55356 7 7 -8 20 2 .000 [50.8 0] 1 .900 [48 .26 ] 1-55356 7 6 -9 1-5146 139-9 1-55356 7 7 -9 30 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 2-55356 7 6 -9 2-5146 139-9 2-55356 7 7 -9 40 4.000 [101.6 0] 3.900 [99.06 ] 3-55356 7 6 -9 3-5146 139-9 3-55356 7 7 -9 N ote: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. C losed E ntry, E nd Stackable, Short Point-of-C ontact, w ith Standoffs Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon Keying Plug M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .000030 [0.00076] gold on contact area, .0 001 50-.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder area all over .0 0 0 0 50 [0 .001 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 68 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 6 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od II R eceptacle Assem blies, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterlines N ote: A ll part num bers are R oH S com pliant. H orizontal M ount, R eceptacle Assem blies M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .000030 [0.00076] gold on contact area, .0 001 50-.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder area all over .0 0 0 0 50 [0 .001 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 68 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 6 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. .32 0 [8 .13] A B .050 [1.27 ] (2 P lc.) .069 [1.7 5] .1 00 [2.54] Typ. 1 2 .1 00 [2.54] .31 0 [7 .8 7 ] .2 38 [6 .05] .1 74 M ax. [4.42] (Point-of-C ontact) (L ocalized G old P late A rea) Post Entry CL CL B .1 00* Typ. [2.54] P C B oard (R ef.) Recom m ended PC Board H ole Layout (for .062 [1 .57] thick PC board) .035 ±.003 [0.8 9 ±0.08 ] .060 +.005 .06 0 -.000 1.52 +0.13 -.000 .31 0 [7 .8 7 ] D ia. Typ. .1 1 5 [2.92] .1 2 5 [3.18 ] (L ocalized G old P late A rea) .1 1 8 [3.00] N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 4 .2 00 [5.08 ] .1 00 [2.54] 6 -5535512-1 5146 140-1 6 -510208 4-4 6 .300 [7 .6 2] .2 00 [5.08 ] 6 -5535512-2 5146 140-2 6 -510208 4-3 8 .400 [10.16 ] .300 [7 .6 2] 6 -5535512-3 5146 140-3 6 -510208 4-2 10 .500 [12.7 0] .400 [10.16 ] 6 -5535512-4 5146 140-4 6 -510208 4-1 12 .600 [15.24] .500 [12.7 0] 5535512-1 5146 140-5 6 -510208 4-0 14 .700 [17 .7 8 ] .600 [15.24] 1-5535512-7 5146 140-6 5-510208 4-9 16 .8 00 [20.32] .700 [17 .7 8 ] 1-5535512-8 5146 140-7 5-510208 4-8 18 .900 [22.8 6 ] .8 00 [20.32] 1-5535512-6 5146 140-8 5-510208 4-7 20 1 .000 [25.40] .900 [22.8 6 ] 5535512-2 5146 140-9 5-510208 4-6 22 1 .1 00 [27 .94] 1 .000 [25.40] 1-5535512-9 1-5146 140-0 5-510208 4-5 24 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 5535512-3 1-5146 140-1 5-510208 4-4 26 1 .300 [33.02] 1 .2 00 [30.48 ] 2-5535512-0 1-5146 140-2 5-510208 4-3 28 1 .400 [35.56 ] 1 .300 [33.02] 2-5535512-1 1-5146 140-3 5-510208 4-2 30 1 .500 [38 .10] 1 .400 [35.56 ] 2-5535512-2 1-5146 140-4 5-510208 4-1 32 1 .600 [40.6 4] 1 .500 [38 .10] 2-5535512-3 1-5146 140-5 5-510208 4-0 34 1 .700 [43.18 ] 1 .600 [40.6 4] 5535512-4 1-5146 140-6 4-510208 4-9 36 1 .8 00 [45.7 2] 1 .700 [43.18 ] 5535512-5 1-5146 140-7 4-510208 4-8 38 1 .900 [48 .26 ] 1 .8 00 [45.7 2] 2-5535512-4 1-5146 140-8 4-510208 4-7 40 2 .000 [50.8 0] 1 .900 [48 .26 ] 2-5535512-5 1-5146 140-9 4-510208 4-6 50 2 .500 [6 3.50] 2 .400 [6 0.96 ] 5535512-7 2-5146 140-0 4-510208 4-1 6 0 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 3-5535512-0 2-5146 140-1 3-510208 4-6 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. .256 [6 .50] m inim um positive pin stop to prevent shorting betw een row. *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. C losed E ntry, E nd Stackable, Short Point-of-C ontact, w ith Standoffs Pos. R ef.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od II Surface M ount H orizontal R eceptacle Assem blies, .10 0 x .10 0 [2 .54 x 2 .54] C enterline Horizontal Mount, Receptacle Assemblies Product Facts I Surface m ount leads I All receptacle assem blies are end stackable I C ontact design em ploys dual cantilever beam s w ith built-in anti-overstress feature I C losed entry housings help prevent post stubbing I H ousings m ade of high tem perature, surface m ount com patible therm oplastic m aterial, 94 V-0 rated I D uplex gold and m atte tin plated contacts have full nickel underplate I H ousings feature PC board standoffs I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 Horizontal surface m ount receptacle assem blies are designed to reliably and econom ically m eet the packaging and interconnec - tion requirem ents of today’s electronics industry as process technologies evolve from w ave soldering to sur - face m ount processing. This broad product line is offered in both single and double row configurations. The .1 0 0 [2.54] centerline assem blies are available in 2-40 (single row ) positions and 4-80 (double row ) positions. Housings are end stackable, w hich gives the advantage of added flexibility. The housings are m ade of high tem perature m aterial that is 94V-0 rated. C ontacts are phosphor bronze, fully underplated w ith nickel to help prevent corrosion and are available in three plating options. The receptacle contact is an established proven design, w ith a fully enclosed one-piece "box" to protect the contact beam s w ith built-in anti-overstress feature. Perform ance C haracteristics M echanical C haracteristics M ating Force — 6.0 oz. [1 .67N] per contact (m ax.) Unm ating Force — .75 oz. [0 .2 1 N] per contact (m in.) during third m ating cycle D urability — 2 00 cycles E nvironm ental C haracteristics Operating Tem perature — -65°C to + 1 2 5°C E lectrical C haracteristics C urrent R ating — 3.0 am peres (m ax.) for single contact; 2 .0 am peres (m ax.) per contact w hen connector is fully energized C ontact R esistance — 1 2 m illiohm s (m ax.) Insulation R esistance — 50 0 0 m egohm s (m in.) betw een adjacent contacts D ielectric W ithstanding Voltage (at sea level) — 750 V rm s R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od II R eceptacle Assem blies, Single-R ow , Surface M ount .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. H orizontal M ount, R eceptacle Assem blies C losed E ntry, E nd Stackable, Short Point-of-C ontact, w ith Standoffs Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon Keying Plug M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .0 00030 [0.0 0 0 76] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 71 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 6 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. A .050 [1.27 ] X Section X–X X .1 00 [2.54] Typ. .008 .005 [0.20] [0.13] Typ. .1 00 [2.54] Typ. .32 0 [8 .13] .1 74 M ax. [4.42] (Point-of-C ontact) .060 Typ. [1.52] .090 Typ. [2.29] .069 [1.7 5] .1 37 [3.48 ] .356 [9.04] .38 8 ±.01 0 R ef. Typ. N o. of D im ension Contact Plating/Part N os. Pos. A Plating A Plating B Plating C 2 .2 00 [5.08 ] 5147 7 21-1 5147 7 32-1 5147 7 33-1 3 .300 [7 .6 2] 5147 7 21-2 5147 7 32-2 5147 7 33-2 4 .400 [10.16 ] 5147 7 21-3 5147 7 32-3 5147 7 33-3 5 .500 [12.7 0] 5147 7 21-4 5147 7 32-4 5147 7 33-4 6 .600 [15.24] 5147 7 21-5 5147 7 32-5 5147 7 33-5 7 .700 [17 .7 8 ] 5147 7 21-6 5147 7 32-6 5147 7 33-6 8 .8 00 [20.32] 5147 7 21-7 5147 7 32-7 5147 7 33-7 9 .900 [22.8 6 ] 5147 7 21-8 5147 7 32-8 5147 7 33-8 10 1 .000 [25.40] 5147 7 21-9 5147 7 32-9 5147 7 33-9 11 1 .1 00 [27 .94] 1-5147 7 21-0 1-5147 7 32-0 1-5147 7 33-0 12 1 .2 00 [30.48 ] 1-5147 7 21-1 1-5147 7 32-1 1-5147 7 33-1 13 1 .300 [33.02] 1-5147 7 21-2 1-5147 7 32-2 1-5147 7 33-2 14 1 .400 [35.56 ] 1-5147 7 21-3 1-5147 7 32-3 1-5147 7 33-3 15 1 .500 [38 .10] 1-5147 7 21-4 1-5147 7 32-4 1-5147 7 33-4 16 1 .600 [40.6 4] 1-5147 7 21-5 1-5147 7 32-5 1-5147 7 33-5 17 1 .700 [43.18 ] 1-5147 7 21-6 1-5147 7 32-6 1-5147 7 33-6 18 1 .8 00 [45.7 2] 1-5147 7 21-7 1-5147 7 32-7 1-5147 7 33-7 19 1 .900 [48 .26 ] 1-5147 7 21-8 1-5147 7 32-8 1-5147 7 33-8 20 2 .000 [50.8 0] 1-5147 7 21-9 1-5147 7 32-9 1-5147 7 33-9 30 3.000 [7 6 .20] 2-5147 7 21-9 2-5147 7 32-9 2-5147 7 33-9 40 4.000 [101.6 0] 3-5147 7 21-9 3-5147 7 32-9 3-5147 7 33-9 Recom m ended Etched Circuit Layout (for .040 [1 .02 ] m in. thick PC Board; .008 [0.2 0] thick stencil) (L ocalized G old P late A rea) .1 2 5 [3.18 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N o. of D im ension Contact Plating/Part N os. Pos. A Plating A Plating B Plating C 4 .2 00 [5.08 ] 5147 7 22-1 5147 7 34-1 5147 7 35-1 6 .300 [7 .6 2] 5147 7 22-2 5147 7 34-2 5147 7 35-2 8 .400 [10.16 ] 5147 7 22-3 5147 7 34-3 5147 7 35-3 10 .500 [12.7 0] 5147 7 22-4 5147 7 34-4 5147 7 35-4 12 .600 [15.24] 5147 7 22-5 5147 7 34-5 5147 7 35-5 14 .700 [17 .7 8 ] 5147 7 22-6 5147 7 34-6 5147 7 35-6 16 .8 00 [20.32] 5147 7 22-7 5147 7 34-7 5147 7 35-7 18 .900 [22.8 6 ] 5147 7 22-8 5147 7 34-8 5147 7 35-8 20 1 .000 [25.40] 5147 7 22-9 5147 7 34-9 5147 7 35-9 22 1 .1 00 [27 .94] 1-5147 7 22-0 1-5147 7 34-0 1-5147 7 35-0 24 1 .2 00 [30.48 ] 1-5147 7 22-1 1-5147 7 34-1 1-5147 7 35-1 26 1 .300 [33.02] 1-5147 7 22-2 1-5147 7 34-2 1-5147 7 35-2 28 1 .400 [35.56 ] 1-5147 7 22-3 1-5147 7 34-3 1-5147 7 35-3 30 1 .500 [38 .10] 1-5147 7 22-4 1-5147 7 34-4 1-5147 7 35-4 32 1 .600 [40.6 4] 1-5147 7 22-5 1-5147 7 34-5 1-5147 7 35-5 34 1 .700 [43.18 ] 1-5147 7 22-6 1-5147 7 34-6 1-5147 7 35-6 36 1 .8 00 [45.7 2] 1-5147 7 22-7 1-5147 7 34-7 1-5147 7 35-7 38 1 .900 [48 .26 ] 1-5147 7 22-8 1-5147 7 34-8 1-5147 7 35-8 40 2 .000 [50.8 0] 1-5147 7 22-9 1-5147 7 34-9 1-5147 7 35-9 50 2 .500 [6 3.50] 2-5147 7 22-4 2-5147 7 34-4 2-5147 7 35-4 6 0 3.000 [7 6 .20] 2-5147 7 22-9 2-5147 7 34-9 2-5147 7 35-9 M od II R eceptacle Assem blies, D ouble-R ow , Surface M ount .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Horizontal Mount, Receptacle Assemblies M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .0 00030 [0.0 0 0 76] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 71 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 6 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. C losed E ntry, E nd Stackable, Short Point-of-C ontact, w ith Standoffs A .050 [1.27 ] R ef. .2 56 [6 .51] Post S top .2 38 [6 .05] .1 00 [2.54] Typ. .008 .005 [0.20] [0.13] Typ. .1 00 [2.54] Typ. .32 0 [8 .13] .1 74 M ax. [4.42] (Point-of-C ontact) .060 Typ. [1.52] .090 Typ. [2.29] .069 [1.7 5] .1 00 [2.54] .356 [9.04] .38 8 ±.01 0 [9.8 5±0.25] (L ocalized G old P late A rea) .1 1 8 [3.00] (L ocalized G old P late A rea) .1 2 5 [3.18 ] Recom m ended Etched Circuit Layout (for .040 [1 .02 ] m in thick PC Board; .008 [0.2 0] thick stencil)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacle Assem blies, Vertical M ount Vertical M ount, R eceptacle Assem blies Product Facts I D ual-cantilever beam contact w ith box design I Single-row assem blies have .10 0 [2 .54] centerline contact spacing; double-row assem blies have .10 0 x .10 0 [2 .54 x 2 .54] centerline contact spacing I 3 through 40 positions in single-row assem blies; 2 through 80 positions in double-row assem blies I M od II Standard .340 [8.64] and M od IV low .2 65 [6.73] profiles I M od II and M od IV profiles available in dual entry I D uplex gold and m atte tin plated contacts have full nickel underplate I Therm oplastic housings, 94V-0 rated I Standoffs for easy flux cleaning I All throughhole assem blies are end stackable I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 Perform ance C haracteristics M echanical C haracteristics M ating Force — 9.0 oz. [2 .5N] per contact (m ax.) Unm ating Force — 1 .5 oz. [0.4 2 N] per contact (m in.) D urability (Tested to) — 2 00 cycles E nvironm ental C haracteristics Operating Tem perature — -65°C to + 1 2 5°C E lectrical C haracteristics C urrent R ating — 3.0 am peres (m ax.) for single contact; 2 .0 am peres (m ax.) per contact w hen connector is fully energized C ontact R esistance — 1 2 m illiohm s (m ax.) Insulation R esistance — 50 0 0 m egohm s (m in.) betw een adjacent contacts D ielectric W ithstanding Voltage (at sea level) — 750 V rm s Vertical receptacle assem blies are designed to reliably and econom ically m eet the packaging and interconnection requirem ents of today’s electronics industry. This broad product line offers a w ide variety of assem bly styles and features. They are available in dual entry style, in both single and double row configurations. The .1 0 0 [2.54] centerline assem blies are available in 3 -40 (single row ) positions and 2-80 (double row ) positions. Standard and low profile housings w hich are end stackable also enhance the product line giving the advantage of added flexibility. The housings are m ade of flam e retardant m aterial that is 94 V-0 rated. C ontacts are phosphor bronze, fully underplated w ith nickel to help prevent corrosion and are available in three plating options. The receptacle contact is an established proven design, w ith a fully enclosed one-piece “box” to protect the contact beam s. These assem blies are offered in .265 [6.73 ] (M od IV) and .3 40 [8.64] (M od II) high profiles. Standard solder tails accom m odate board thickness of .0 62 [1 .57]. Product styles include single and dual tine variations. O utrigger tine styles are also available for bottom entry parallel board stacking applications. R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od II R eceptacle Assem blies, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Vertical Mount, Receptacle Assemblies N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 3 .300 [7 .6 2] .2 00 [5.08 ] 5-534237 -1 5-146 38 6 -1 5-146 7 6 3-5 4 .400 [10.16 ] .300 [7 .6 2] 5-534237 -2 6 -146 38 6 -9 5-146 7 6 3-6 5 .500 [12.7 0] .400 [10.16 ] 5-534237 -3 5-146 38 6 -2 5-146 7 6 3-7 6 .600 [15.24] .500 [12.7 0] 5-534237 -4 5-146 38 6 -3 5-146 7 6 3-8 7 .700 [17 .7 8 ] .600 [15.24] 5-534237 -5 5-146 38 6 -4 5-146 7 6 3-1 8 .8 00 [20.32] .700 [17 .7 8 ] 5-534237 -6 5-146 38 6 -5 5-146 7 6 3-2 9 .900 [22.8 6 ] .8 00 [20.32] 5-534237 -7 5-146 38 6 -6 5-146 7 6 3-9 10 1 .000 [25.40] .900 [22.8 6 ] 5-534237 -8 5-146 38 6 -7 5-146 7 6 3-3 11 1 .1 00 [27 .94] 1 .000 [25.40] 5-534237 -9 5-146 38 6 -8 6 -146 7 6 3-0 12 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 6 -534237 -0 5-146 38 6 -9 6 -146 7 6 3-1 13 1 .300 [33.02] 1 .2 00 [30.48 ] 6 -534237 -1 6 -146 38 6 -0 6 -146 7 6 3-2 14 1 .400 [35.56 ] 1 .300 [33.02] 6 -534237 -2 6 -146 38 6 -1 6 -146 7 6 3-3 15 1 .500 [38 .10] 1 .400 [35.56 ] 6 -534237 -3 7 -146 38 6 -0 6 -146 7 6 3-4 16 1 .600 [40.6 4] 1 .500 [38 .10] 6 -534237 -4 7 -146 38 6 -1 6 -146 7 6 3-5 17 1 .700 [43.18 ] 1 .600 [40.6 4] 6 -534237 -5 7 -146 38 6 -2 6 -146 7 6 3-6 18 1 .8 00 [45.7 2] 1 .700 [43.18 ] 6 -534237 -6 7 -146 38 6 -3 6 -146 7 6 3-7 19 1 .900 [48 .26 ] 1 .8 00 [45.7 2] 6 -534237 -7 7 -146 38 6 -4 6 -146 7 6 3-8 20 2 .000 [50.8 0] 1 .900 [48 .26 ] 6 -534237 -8 6 -146 38 6 -2 6 -146 7 6 3-9 30 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 7 -534237 -8 6 -146 38 6 -8 7 -146 7 6 3-8 40 4.000 [101.6 0] 3.900 [99.06 ] 8 -534237 -8 8 -146 38 6 -8 8 -146 7 6 3-8 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension. Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon C losed Top E ntry, E nd Stackable, w ith Single Tine C ontacts .340 [8 .6 4] A B .1 00±.003 [2.54±0.08 ] .1 40 [3.56 ] .050 [1.27 ] M ax. Typ. .1 1 5 [2.92] R ef. .1 07 [2.7 2] (L ocalized G old P late A rea) Point of C ontact .1 48 [3.7 6 ] X X Recom m ended PC Board H ole Layout .1 00 [2.54] .035±.003 [0.8 9±0.08 ] .02 0 [0.51] (S tandoffs) D ia. Typ. M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .0 0 0030 [0.0 0 0 76] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 74 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 2 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. Keying Plug

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od II R eceptacle Assem blies, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Vertical M ount, R eceptacle Assem blies N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 2 .1 00 [2.54] — 5-534206 -1 5-147 424-1 5-146 7 6 2-8 4 .2 00 [5.08 ] .1 00 [2.54] 5-534206 -2 5-147 424-2 5-146 7 6 2-9 6 .300 [7 .6 2] .2 00 [5.08 ] 5-534206 -3 5-147 424-3 6 -146 7 6 2-0 8 .400 [10.16 ] .300 [7 .6 2] 5-534206 -4 5-147 424-4 5-146 7 6 2-1 10 .500 [12.7 0] .400 [10.16 ] 5-534206 -5 5-147 424-5 5-146 7 6 2-2 12 .600 [15.24] .500 [12.7 0] 5-534206 -6 5-147 424-6 6 -146 7 6 2-1 14 .700 [17 .7 8 ] .600 [15.24] 5-534206 -7 5-147 424-7 6 -146 7 6 2-2 16 .8 00 [20.32] .700 [17 .7 8 ] 5-534206 -8 5-147 424-8 6 -146 7 6 2-3 18 .900 [22.8 6 ] .8 00 [20.32] 5-534206 -9 5-147 424-9 5-146 7 6 2-3 20 1 .000 [25.40] .900 [22.8 6 ] 6 -534206 -0 6 -147 424-0 5-146 7 6 2-7 22 1 .1 00 [27 .94] 1 .000 [25.40] 6 -534206 -1 6 -147 424-1 6 -146 7 6 2-4 24 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 6 -534206 -2 6 -147 424-2 6 -146 7 6 2-5 26 1 .300 [33.02] 1 .2 00 [30.48 ] 6 -534206 -3 6 -147 424-3 6 -146 7 6 2-6 28 1 .400 [35.56 ] 1 .300 [33.02] 6 -534206 -4 6 -147 424-4 6 -146 7 6 2-7 30 1 .500 [38 .10] 1 .400 [35.56 ] 6 -534206 -5 6 -147 424-5 5-146 7 6 2-4 32 1 .600 [40.6 4] 1 .500 [38 .10] 6 -534206 -6 6 -147 424-6 6 -146 7 6 2-8 34 1 .700 [43.18 ] 1 .600 [40.6 4] 6 -534206 -7 6 -147 424-7 6 -146 7 6 2-9 36 1 .8 00 [45.7 2] 1 .700 [43.18 ] 6 -534206 -8 6 -147 424-8 7 -146 7 6 2-0 38 1 .900 [48 .26 ] 1 .8 00 [45.7 2] 6 -534206 -9 6 -147 424-9 7 -146 7 6 2-1 40 2 .000 [50.8 0] 1 .900 [48 .26 ] 7 -534206 -0 7 -147 424-0 5-146 7 6 2-5 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension. Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon C losed Top E ntry, Side and E nd Stackable .10 0 x .10 0 [2 .54 x 2 .54] C enterline, .10 0 [2 .54] Tine Spacing .340 [8 .6 4] A .1 00±.003 [2.54±0.08 ] .050 [1.27 ] M ax. Typ. .1 48 [3.7 7 ] Typ. .1 07 [2.7 2] Typ. B Recom m ended PC Board H ole Layout (for .062 [1 .57] thick PC board) .035±.003 [0.8 9±0.08 ] .02 0 [0.51] (S tandoffs) D ia. .1 00 [2.54] Typ. .1 98 [5.03] .1 00 [2.54] Typ. .1 00 [2.54] Typ. .1 00 [2.54] Typ. .1 1 5±.01 0 [2.92±0.25] R ef. Keying Plug M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .0 0 0030 [0.0 0 0 76] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 74 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 2 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. (L ocalized G old P late A rea) Point of C ontact

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV R eceptacle Assem blies, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Vertical Mount, Receptacle Assemblies N o. of D im ensions C ontact P lating/Part N os. Pos. AB P lating A P lating B P lating C 3 .300 [7 .6 2] .2 00 [5.08 ] 8 -8 7 8 7 9-7 5-147 326 -1 5-1027 42-4 4 .400 [10.16 ] .300 [7 .6 2] 8 -8 7 8 7 9-6 5-147 326 -2 5-1027 42-8 5 .500 [12.7 0] .400 [10.16 ] 8 -8 7 8 7 9-8 5-147 326 -3 5-1027 42-9 6 .600 [15.24] .500 [12.7 0] 5-8 7 8 7 9-3 5-147 326 -4 6 -1027 42-0 7 .700 [17 .7 8 ] .600 [15.24] 5-8 7 8 7 9-4 5-147 326 -5 5-1027 42-7 8 .8 00 [20.32] .700 [17 .7 8 ] 5-8 7 8 7 9-1 5-147 326 -6 5-1027 42-3 9 .900 [22.8 6 ] .8 00 [20.32] 5-8 7 8 7 9-5 5-147 326 -7 5-1027 42-6 10 1 .000 [25.40] .900 [22.8 6 ] 5-8 7 8 7 9-2 5-147 326 -8 6 -1027 42-1 11 1 .1 00 [27 .94] 1 .000 [25.40] 5-8 7 8 7 9-6 5-147 326 -9 5-1027 42-1 12 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 5-8 7 8 7 9-7 6 -147 326 -0 5-1027 42-2 13 1 .300 [33.02] 1 .2 00 [30.48 ] 5-8 7 8 7 9-8 6 -147 326 -1 6 -1027 42-2 14 1 .400 [35.56 ] 1 .300 [33.02] 5-8 7 8 7 9-9 6 -147 326 -2 6 -1027 42-3 15 1 .500 [38 .10] 1 .400 [35.56 ] 6 -8 7 8 7 9-0 6 -147 326 -3 6 -1027 42-4 16 1 .600 [40.6 4] 1 .500 [38 .10] 6 -8 7 8 7 9-1 6 -147 326 -4 5-1027 42-5 17 1 .700 [43.18 ] 1 .600 [40.6 4] 6 -8 7 8 7 9-2 6 -147 326 -5 6 -1027 42-5 18 1 .8 00 [45.7 2] 1 .700 [43.18 ] 6 -8 7 8 7 9-3 6 -147 326 -6 6 -1027 42-6 19 1 .900 [48 .26 ] 1 .8 00 [45.7 2] 6 -8 7 8 7 9-4 6 -147 326 -7 6 -1027 42-7 20 2 .000 [50.8 0] 1 .900 [48 .26 ] 6 -8 7 8 7 9-5 6 -147 326 -8 6 -1027 42-8 30 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 7 -8 7 8 7 9-5 7 -147 326 -8 7 -1027 42-8 40 4.000 [101.6 0] 3.900 [99.06 ] 8 -8 7 8 7 9-5 8 -147 326 -8 8 -1027 42-8 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension and .06 2 for recom m ended board thickness. M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .0 0 0030 [0.0 0 0 76] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 74 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 2 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon D ual E ntry, E nd Stackable, Low Profile w ith D ual Tine C ontacts Keying Plug .2 47 [6 .29] .2 68 [6 .7 9] R ef. Typ. .02 0 [0.51] Typ. .050 [1.27 ] 2 P lcs. .1 40 [3.56 ] B A .1 00 [2.54] A A .1 1 5 [2.92] Typ. .1 08 [2.7 4] Typ. .1 48 [3.7 6 ] Typ. C ontact Typ. Section A-A Ø .067-.064 [1.7 0-1.6 3] Typ. Recom m ended PC Board H ole Layout

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV R eceptacle Assem blies, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Vertical M ount, R eceptacle Assem blies M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .000030 [0.00076] gold on contact area, .0 001 50-.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder area all over .0 0 0 0 50 [0 .001 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 74 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 2 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. C losed Top E ntry, E nd Stackable, Low Profile w ith Single Tine C ontacts .2 45 [6 .22] A .1 00±.003 [2.54±0.08 ] .1 48 [3.7 6 ] .1 07 [2.7 2] (L ocalized G old P late A rea) .1 2 5 [3.18 ] R ef. B Recom m ended PC Board H ole Layout (for .062 [1 .57] thick PC board) .02 0 [0.51] (S tandoffs) .1 40 [3.56 ] .1 00 [2.54] N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 3 .300 [7 .6 2] .2 00 [5.08 ] 5-535541-1 5-146 138 -1 5-53558 4-3 4 .400 [10.16 ] .300 [7 .6 2] 5-535541-2 5-146 138 -2 5-53558 4-4 5 .500 [12.7 0] .400 [10.16 ] 5-535541-3 5-146 138 -3 5-53558 4-5 6 .600 [15.24] .500 [12.7 0] 5-535541-4 5-146 138 -4 5-53558 4-1 7 .700 [17 .7 8 ] .600 [15.24] 5-535541-5 5-146 138 -5 5-53558 4-6 8 .8 00 [20.32] .700 [17 .7 8 ] 5-535541-6 5-146 138 -6 5-53558 4-7 9 .900 [22.8 6 ] .8 00 [20.32] 5-535541-7 5-146 138 -7 5-53558 4-8 10 1 .000 [25.40] .900 [22.8 6 ] 5-535541-8 5-146 138 -8 5-53558 4-9 11 1 .1 00 [27 .94] 1 .000 [25.40] 5-535541-9 5-146 138 -9 6 -53558 4-0 12 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 6 -535541-0 6 -146 138 -0 6 -53558 4-1 13 1 .300 [33.02] 1 .2 00 [30.48 ] 6 -535541-1 6 -146 138 -1 6 -53558 4-2 14 1 .400 [35.56 ] 1 .300 [33.02] 6 -535541-2 6 -146 138 -2 6 -53558 4-3 15 1 .500 [38 .10] 1 .400 [35.56 ] 6 -535541-3 6 -146 138 -3 6 -53558 4-4 16 1 .600 [40.6 4] 1 .500 [38 .10] 6 -535541-4 6 -146 138 -4 6 -53558 4-5 17 1 .700 [43.18 ] 1 .600 [40.6 4] 6 -535541-5 6 -146 138 -5 6 -53558 4-6 18 1 .8 00 [45.7 2] 1 .700 [43.18 ] 6 -535541-6 6 -146 138 -6 5-53558 4-2 19 1 .900 [48 .26 ] 1 .8 00 [45.7 2] 6 -535541-7 6 -146 138 -7 6 -53558 4-7 20 2 .000 [50.8 0] 1 .900 [48 .26 ] 6 -535541-8 6 -146 138 -8 6 -53558 4-8 30 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 7 -535541-9 7 -146 138 -9 6 -53558 4-9 40 4.000 [101.6 0] 3.900 [99.06 ] 8 -535541-9 8 -146 138 -9 7 -53558 4-0 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith select gold plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension. .050 [1.27 ] M ax. Typ. .035±.003 [0.8 8 ±0.08 ] D ia. Typ. X X Section XX Point of C ontact

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV R eceptacle Assem blies, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Vertical Mount, Receptacle Assemblies N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 2 .1 00 [2.54] — 5- 534998 -1 5- 535598 -2 5- 53558 5-3 4 .2 00 [5.08 ] .1 00 [2.54] 5- 534998 -2 5- 535598 -3 5- 53558 5-4 6 .300 [7 .6 2] .2 00 [5.08 ] 5- 534998 -3 5- 535598 -4 5- 53558 5-5 8 .400 [10.16 ] .300 [7 .6 2] 5- 534998 -4 5- 535598 -5 5- 53558 5-6 10 .500 [12.7 0] .400 [10.16 ] 5- 534998 -5 5- 535598 -6 5- 53558 5-1 12 .600 [15.24] .500 [12.7 0] 5- 534998 -6 5- 535598 -7 5- 53558 5-2 14 .700 [17 .7 8 ] .600 [15.24] 5- 534998 -7 5- 535598 -1 5- 53558 5-7 16 .8 00 [20.32] .700 [17 .7 8 ] 5- 534998 -8 5- 535598 -8 5- 53558 5-8 18 .900 [22.8 6 ] .8 00 [20.32] 5- 534998 -9 5- 535598 -9 5- 53558 5-9 20 1 .000 [25.40] .900 [22.8 6 ] 6 -534998 -0 6 -535598 -0 6 -53558 5-0 22 1 .1 00 [27 .94] 1 .000 [25.40] 6 -534998 -1 6 -535598 -1 6 -53558 5-1 24 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 6 -534998 -2 6 -535598 -2 6 -53558 5-2 26 1 .300 [33.02] 1 .2 00 [30.48 ] 6 -534998 -3 6 -535598 -3 6 -53558 5-3 28 1 .400 [35.56 ] 1 .300 [33.02] 6 -534998 -4 6 -535598 -4 6 -53558 5-4 30 1 .500 [38 .10] 1 .400 [35.56 ] 6 -534998 -5 6 -535598 -5 6 -53558 5-5 32 1 .600 [40.6 4] 1 .500 [38 .10] 6 -534998 -6 6 -535598 -6 6 -53558 5-6 34 1 .700 [43.18 ] 1 .600 [40.6 4] 6 -534998 -7 6 -535598 -7 6 -53558 5-7 36 1 .8 00 [45.7 2] 1 .700 [43.18 ] 6 -534998 -8 6 -535598 -8 6 -53558 5-8 38 1 .900 [48 .26 ] 1 .8 00 [45.7 2] 6 -534998 -9 6 -535598 -9 6 -53558 5-9 40 2 .000 [50.8 0] 1 .900 [48 .26 ] 7 -534998 -0 7 -535598 -0 7 -53558 5-0 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension. M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .000030 [0.00076] gold on contact area, .0 001 50-.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder area all over .0 0 0 0 50 [0 .001 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 74 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 2 Application Specification 1 1 4 -2 50 1 8 C losed Top E ntry, E nd and Side Stackable, Low Profile, .10 0 x .10 0 [2 .54 x 2 .54] C enterline, .10 0 [2 .54] Tine Spacing .2 45 [6 .22] .1 00±.003 [2.540.08 ] .1 98 [5.03] Recom m ended PC Board H ole Layout .02 0 [0.51] (S tandoffs) B .1 00 [2.54] Typ. .1 00 [2.54] Typ. .1 00 [2.54] Typ. .050 [1.27 ] M ax. Typ. .035±.003 .1 48 [3.7 7 ] Typ. .1 2 5±.01 0 [3.18 ±0.25] Typ. .1 07 [2.7 2] Typ. .1 00 [2.54] Typ. (L ocalized G old P late A rea) A Point of C ontact

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 M od IV R eceptacle Assem blies, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Vertical M ount, R eceptacle Assem blies N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 42 2 .1 00 [53.34] 2 .000 [50.8 0] 7 -534998 -1 7 -535598 -4 7 -53558 5-4 44 2 .2 00 [55.8 8 ] 2 .1 00 [53.34] 7 -534998 -2 7 -535598 -5 7 -53558 5-5 46 2 .300 [58 .42] 2 .2 00 [55.8 8 ] 7 -534998 -3 7 -535598 -6 7 -53558 5-6 48 2 .400 [6 0.96 ] 2 .300 [58 .42] 7 -534998 -4 7 -535598 -7 7 -53558 5-7 50 2 .500 [6 3.50] 2 .400 [6 0.96 ] 7 -534998 -5 7 -535598 -1 7 -53558 5-1 52 2 .600 [6 6 .04] 2 .500 [6 3.50] 7 -534998 -6 7 -535598 -8 7 -53558 5-8 54 2 .700 [6 8 .58 ] 2 .600 [6 6 .04] 7 -534998 -7 7 -535598 -9 7 -53558 5-9 56 2 .8 00 [7 1.12] 2 .700 [6 8 .58 ] 7 -534998 -8 8 -535598 -0 8 -53558 5-0 58 2 .900 [7 3.6 6 ] 2 .8 00 [7 1.12] 7 -534998 -9 8 -535598 -1 8 -53558 5-1 6 0 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 8 -534998 -0 7 -535598 -2 7 -53558 5-2 6 2 3.1 00 [7 8 .7 4] 3.000 [7 6 .20] 8 -534998 -1 8 -535598 -2 8 -53558 5-2 6 4 3.2 00 [8 1.28 ] 3.1 00 [7 8 .7 4] 8 -534998 -2 8 -535598 -3 8 -53558 5-3 6 6 3.300 [8 3.8 2] 3.2 00 [8 1.28 ] 8 -534998 -3 8 -535598 -4 8 -53558 5-4 6 8 3.400 [8 6 .36 ] 3.300 [8 3.8 2] 8 -534998 -4 8 -535598 -5 8 -53558 5-5 7 0 3.500 [8 8 .90] 3.400 [8 6 .36 ] 8 -534998 -5 8 -535598 -6 8 -53558 5-6 7 2 3.600 [91.44] 3.500 [8 8 .90] 8 -534998 -6 8 -535598 -7 8 -53558 5-7 7 4 3.700 [93.98 ] 3.600 [91.44] 8 -534998 -7 8 -535598 -8 8 -53558 5-8 7 6 3.8 00 [96 .52] 3.700 [93.98 ] 8 -534998 -8 8 -535598 -9 8 -53558 5-9 7 8 3.900 [99.06 ] 3.8 00 [96 .52] 8 -534998 -9 9-535598 -0 9-53558 5-0 8 0 4.000 [101.6 0] 3.900 [99.06 ] 9-534998 -0 7 -535598 -3 7 -53558 5-3 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension. Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon Keying Plug AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV R eceptacle Assem blies, Single-R ow , Outrigger D esign .10 0 x .10 0 [2 .54 x 2 .54] C enterline, E nd To E nd Stackable Vertical Mount, Receptacle Assemblies N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 3 .300 [7 .6 2] .2 00 [5.08 ] 5-147 7 20-2 5-147 7 26 -2 5-147 7 27 -2 4 .400 [10.16 ] .300 [7 .6 2] 5-147 7 20-3 5-147 7 26 -3 5-147 7 27 -3 5 .500 [12.7 0] .400 [10.16 ] 5-147 7 20-4 5-147 7 26 -4 5-147 7 27 -4 6 .600 [15.24] .500 [12.7 0] 5-147 7 20-5 5-147 7 26 -5 5-147 7 27 -5 7 .700 [17 .7 8 ] .600 [15.24] 5-147 7 20-6 5-147 7 26 -6 5-147 7 27 -6 8 .8 00 [20.32] .700 [17 .7 8 ] 5-147 7 20-7 5-147 7 26 -7 5-147 7 27 -7 9 .900 [22.8 6 ] .8 00 [20.32] 5-147 7 20-8 5-147 7 26 -8 5-147 7 27 -8 10 1 .000 [25.40] .900 [22.8 6 ] 5-147 7 20-9 5-147 7 26 -9 5-147 7 27 -9 11 1 .1 00 [27 .94] 1 .000 [25.40] 6 -147 7 20-0 6 -147 7 26 -0 6 -147 7 27 -0 12 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 6 -147 7 20-1 6 -147 7 26 -1 6 -147 7 27 -1 13 1 .300 [33.02] 1 .2 00 [30.48 ] 6 -147 7 20-2 6 -147 7 26 -2 6 -147 7 27 -2 14 1 .400 [35.56 ] 1 .300 [33.02] 6 -147 7 20-3 6 -147 7 26 -3 6 -147 7 27 -3 15 1 .500 [38 .10] 1 .400 [35.56 ] 6 -147 7 20-4 6 -147 7 26 -4 6 -147 7 27 -4 16 1 .600 [40.6 4] 1 .500 [38 .10] 6 -147 7 20-5 6 -147 7 26 -5 6 -147 7 27 -5 17 1 .700 [43.18 ] 1 .600 [40.6 4] 6 -147 7 20-6 6 -147 7 26 -6 6 -147 7 27 -6 18 1 .8 00 [45.7 2] 1 .700 [43.18 ] 6 -147 7 20-7 6 -147 7 26 -7 6 -147 7 27 -7 19 1 .900 [48 .26 ] 1 .8 00 [45.7 2] 6 -147 7 20-8 6 -147 7 26 -8 6 -147 7 27 -8 20 2 .000 [50.8 0] 1 .900 [48 .26 ] 7 -147 7 20-8 7 -147 7 26 -8 7 -147 7 27 -8 30 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 8 -147 7 20-8 8 -147 7 26 -8 8 -147 7 27 -8 40 4.000 [101.6 0] 3.900 [99.06 ] 8 -147 7 20-9 8 -147 7 26 -9 8 -147 7 27 -9 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension and add .06 2 [1.57 ] for recom m ended board thickness if used in bottom entry application. M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated Plating A — D uplex .000030 [0.00076] gold on contact area, .0 001 50-0.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder area all over .0 0 0 0 50 [0 .001 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel .2 45 [6 .22] .1 40 [3.56 ] .075 +.005 -.000 [1.90 +0.13 ]-.000 .1 40 [3.56 ] .1 2 5±.01 0 [3.17 ±0.25] Typ. Recom m ended PC Board H ole Layout .02 0 [0.51] (S tandoffs) B .1 00 [2.54] Typ. .053 [1.34] Typ. .2 00 [5.08 ] .035±.003 .2 00±.003 [5.08 ±0.08 ] Typ. .1 00 [2.54] Typ. A D ual E ntry, E nd Stackable, Low Profile, .10 0 x .10 0 [2 .54 x 2 .54] C enterline, .2 0 0 [5.0 8] Tine Spacing .1 07 [2.7 2] (L ocalized G old P late A rea) .1 48 [3.7 7 ] Typ. Point of C ontact N ote: A ll part num bers are R oH S com pliant.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV R eceptacle Assem blies, D ouble-R ow , Outrigger D esign, .10 0 x .10 0 [2 .54 x 2 .54] C enterline, E nd to E nd Stackable N ote: A ll part num bers are R oH S com pliant. Vertical M ount, R eceptacle Assem blies N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 2 .1 00 [2.54] — 6 -53426 7 -3 5-147 099-1 8 -147 100-9 4 .2 00 [5.08 ] .1 00 [2.54] 6 -53426 7 -7 5-147 099-2 9-147 100-0 6 .300 [7 .6 2] .2 00 [5.08 ] 6 -53426 7 -4 5-147 099-3 5-147 100-1 8 .400 [10.16 ] .300 [7 .6 2] 5-53426 7 -5 5-147 099-4 5-147 100-2 14 .700 [17 .7 8 ] .600 [15.24] 5-53426 7 -1 5-147 099-7 5-147 100-5 18 .900 [22.8 6 ] .8 00 [20.32] 6 -53426 7 -0 5-147 099-9 5-147 100-7 20 1 .000 [25.40] .900 [22.8 6 ] 5-53426 7 -2 6 -147 099-0 5-147 100-8 24 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 5-53426 7 -9 6 -147 099-2 6 -147 100-0 30 1 .500 [38 .10] 1 .400 [35.56 ] 6 -53426 7 -2 6 -147 099-5 6 -147 100-3 36 1 .8 00 [45.7 2] 1 .700 [43.18 ] 6 -53426 7 -5 6 -147 099-8 6 -147 100-6 40 2 .000 [50.8 0] 1 .900 [48 .26 ] 5-53426 7 -7 7 -147 099-0 6 -147 100-8 48 2 .400 [6 0.96 ] 2 .300 [58 .42] 6 -53426 7 -1 7 -147 099-4 7 -147 100-2 50 2 .500 [6 3.50] 2 .400 [6 0.96 ] 6 -53426 7 -8 7 -147 099-5 7 -147 100-3 6 0 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 5-53426 7 -8 8 -147 099-0 7 -147 100-8 7 6 3.8 00 [96 .52] 3.700 [93.98 ] 6 -53426 7 -6 8 -147 099-8 8 -147 100-6 8 0 4.000 [101.6 0] 3.900 [99.06 ] 5-53426 7 -4 9-147 099-0 8 -147 100-8 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension and .06 2 for recom m ended board thickness if used in bottom entry application. M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .000030 [0.00076] gold on contact area, .0 0 01 50-.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder area all over .0 0 0 0 50 [0 .001 2 7] nickel Plating B — D uplex .00001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 74 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 2 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon D ual E ntry, E nd Stackable, Low Profile, .10 0 x .10 0 [2 .54 x 2 .54] C enterline, .30 0 [7.62 ] Tine Spacing .2 45 [6 .22] Typ. .300 [7 .6 2] Typ. A .1 00±.003 [2.54±0.08 ] .1 2 5±.01 0 [3.17 ±0.25] .050 [1.27 ] M ax. Typ. Recom m ended PC Board H ole Layout .035 ±.003 [0.8 9 ±0.08 ] .02 0 [0.51] (S tandoffs) B D ia. Typ. .1 00 [2.54] Typ. .1 00 [2.54] Typ. .1 00 [2.54] Typ. .1 48 [3.7 7 ] Typ. .1 00 [2.54] Typ. .1 00 [2.54] Typ. .1 98 [5.03] D ia. Typ. .075 +.005 .06 0 -0.00 1.90 +0.13 -0.00 [ ] Keying Plug .1 07 [2.7 2] Typ. (L ocalized G old P late A rea) Point of C ontact

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od. IV R eceptacle Assem blies, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline Vertical Mount, Receptacle Assemblies M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .000030 [0.00076] gold on contact area, .0 001 50-.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder area all over .0 0 0 0 50 [0 .001 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to the M ating P ost S election G uide — page 90 Perform ance C haracteristics — page 1 74 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 2 Application Specification 1 1 4 -2 50 1 8 C losed D ual E ntry, Side and E nd Stackable Low Profile, .10 0 x .10 0 [2 .54 x 2 .54] C enterline, .150 [3.81] Tine Spacing .1 00±.003 [2.54±0.08 ] .2 45 [6 .22] Typ. .02 0 [0.51] Typ. (S tandoffs) A .1 98 [5.03] .050 [1.27 ] M ax. Typ. .1 50 [3.8 1] Typ. .1 30±.01 0 [3.30±0.25] Typ. .1 48 [3.7 7 ] Typ. Point of C ontact .1 07 [2.7 2] Typ. (L ocalized G old P late A rea) N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 2 .1 00 [2.54] — 5-535542-1 5-147 095-1 5-147 096 -1 4 .2 00 [5.08 ] .1 00 [2.54] 5-535542-2 5-147 095-2 5-147 096 -2 6 .300 [7 .6 2] .2 00 [5.08 ] 5-535542-3 5-147 095-3 5-147 096 -3 8 .400 [10.16 ] .300 [7 .6 2] 5-535542-4 5-147 095-4 5-147 096 -4 10 .500 [12.7 0] .400 [10.16 ] 5-535542-5 5-147 095-5 5-147 096 -5 12 .600 [15.24] .500 [12.7 0] 5-535542-6 5-147 095-6 5-147 096 -6 14 .700 [17 .7 8 ] .600 [15.24] 5-535542-7 5-147 095-7 5-147 096 -7 16 .8 00 [20.32] .700 [17 .7 8 ] 5-535542-8 5-147 095-8 5-147 096 -8 18 .900 [22.8 6 ] .8 00 [20.32] 5-535542-9 5-147 095-9 5-147 096 -9 20 1 .000 [25.40] .900 [22.8 6 ] 6 -535542-0 6 -147 095-0 6 -147 096 -0 22 1 .1 00 [27 .94] 1 .000 [25.40] 6 -535542-1 6 -147 095-1 6 -147 096 -1 24 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 6 -535542-2 6 -147 095-2 6 -147 096 -2 26 1 .300 [33.02] 1 .2 00 [30.48 ] 6 -535542-3 6 -147 095-3 6 -147 096 -3 28 1 .400 [35.56 ] 1 .300 [33.02] 6 -535542-4 6 -147 095-4 6 -147 096 -4 30 1 .500 [38 .10] 1 .400 [35.56 ] 6 -535542-5 6 -147 095-5 6 -147 096 -5 32 1 .600 [40.6 4] 1 .500 [38 .10] 6 -535542-6 6 -147 095-6 6 -147 096 -6 34 1 .700 [43.18 ] 1 .600 [40.6 4] 6 -535542-7 6 -147 095-7 6 -147 096 -7 36 1 .8 00 [45.7 2] 1 .700 [43.18 ] 6 -535542-8 6 -147 095-8 6 -147 096 -8 38 1 .900 [48 .26 ] 1 .8 00 [45.7 2] 6 -535542-9 6 -147 095-9 6 -147 096 -9 40 2 .000 [50.8 0] 1 .900 [48 .26 ] 7 -535542-0 7 -147 095-0 7 -147 096 -0 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension, and .06 2 [1.57 ] for recom m ended board thickness if used in bot - tom entry application. .1 00 [2.54] .1 00* [2.54] Typ. .1 00 [2.54] Typ. B Recom m ended PC Board H ole Layout for Bottom Entry or Pass Through Applications *±.003 [±0.08 ] tolerances not to accum ulate w ithin one connector pattern. Recom m ended PC Board H ole Layout for Top Entry .035±.003 [0.8 9±0.08 ] D ia. Typ. B D ia. Typ. .075 +.005 .06 0 -.000 .1 00 [2.54] Typ. .1 50 [3.8 1] Typ. N ote: A ll part num bers are R oH S com pliant.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od. IV R eceptacle Assem blies, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Vertical M ount, R eceptacle Assem blies N o. of D im ensions Contact Plating/Part N os. Pos. AB Plating A Plating B Plating C 42 2 .1 00 [53.34] 2 .000 [50.8 0] 7 -535542-1 7 -147 095-1 7 -147 096 -1 44 2 .2 00 [55.8 8 ] 2 .1 00 [53.34] 7 -535542-2 7 -147 095-2 7 -147 096 -2 46 2 .300 [58 .42] 2 .2 00 [55.8 8 ] 7 -535542-3 7 -147 095-3 7 -147 096 -3 48 2 .400 [6 0.96 ] 2 .300 [58 .42] 7 -535542-4 7 -147 095-4 7 -147 096 -4 50 2 .500 [6 3.50] 2 .400 [6 0.96 ] 7 -535542-5 7 -147 095-5 7 -147 096 -5 52 2 .600 [6 6 .04] 2 .500 [6 3.50] 7 -535542-6 7 -147 095-6 7 -147 096 -6 54 2 .700 [6 8 .58 ] 2 .600 [6 6 .04] 7 -535542-7 7 -147 095-7 7 -147 096 -7 56 2 .8 00 [7 1.12] 2 .700 [6 8 .58 ] 7 -535542-8 7 -147 095-8 7 -147 096 -8 58 2 .900 [7 3.6 6 ] 2 .8 00 [7 1.12] 7 -535542-9 7 -147 095-9 7 -147 096 -9 6 0 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 8 -535542-0 8 -147 095-0 8 -147 096 -0 6 2 3.1 00 [7 8 .7 4] 3.000 [7 6 .20] 8 -535542-1 8 -147 095-1 8 -147 096 -1 6 4 3.2 00 [8 1.28 ] 3.1 00 [7 8 .7 4] 8 -535542-2 8 -147 095-2 8 -147 096 -2 6 6 3.300 [8 3.8 2] 3.2 00 [8 1.28 ] 8 -535542-3 8 -147 095-3 8 -147 096 -3 6 8 3.400 [8 6 .36 ] 3.300 [8 3.8 2] 8 -535542-4 8 -147 095-4 8 -147 096 -4 7 0 3.500 [8 8 .90] 3.400 [8 6 .36 ] 8 -535542-5 8 -147 095-5 8 -147 096 -5 7 2 3.600 [91.44] 3.500 [8 8 .90] 8 -535542-6 8 -147 095-6 8 -147 096 -6 7 4 3.700 [93.98 ] 3.600 [91.44] 8 -535542-7 8 -147 095-7 8 -147 096 -7 7 6 3.8 00 [96 .52] 3.700 [93.98 ] 8 -535542-8 8 -147 095-8 8 -147 096 -8 7 8 3.900 [99.06 ] 3.8 00 [96 .52] 8 -535542-9 8 -147 095-9 8 -147 096 -9 8 0 4.000 [101.6 0] 3.900 [99.06 ] 9-535542-0 9-147 095-0 9-147 096 -0

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV Surface M ount Vertical R eceptacle Assem blies, .10 0 x .10 0 [2 .54 x 2 .54] C enterline Surface Mount Receptacle Assemblies The A M PM O D U 0 .0 25 [0 .64] square interconnection system is an industry standard that has provided level III and IV thru-hole interconnections to alm ost every industry and m arketplace for years. A s technology advances, so has the A M PM O D U product line. Surface m ount vertical receptacle assem blies are available to m eet your level II packaging needs as process technologies evolve from w ave soldering to surface m ount reflow (infrared and vapor-phase) processes. A M PM O D U surface m ount receptacle assem blies are offered in vertical dual entry configurations. These receptacles are available in single-row and double-row configurations w ith a contact centerline spacing A M PM O D U surface m ount vertical receptacle assem blies continue to provide the proven features and benefits of their thru-hole counterparts in the A M PM O D U product fam ily. C losed-entry style housing design provides a lead-in ram p for positive m ating of contacts, virtually elim inating the possibility of stubbing. The dual-beam receptacle contact design, coupled w ith gold plating in the contact area, provides a reliable interface. Tin plating on the solder tails also enhances solderability. The incorporation of com pliant m etallic hold dow ns on receptacle assem blies offers m ultiple benefits. The hold dow ns provide for proper lead-to- pad registration and provide retention to the PC board prior to and during processing. U sed w ith a plated thru-hole, the hold dow ns are soldered during the reflow process and serve as a strain relief for the solder joints during m ating/unm ating. The design of the hold dow ns results in an excellent ratio of insertion/extraction forces (into the PC board); 20 lb. [89 N ] m axim um insertion force per pair and 1 0 lb. [44.5 N ] m inim um extraction force per pair (unsoldered). N o tools are required for insertion. Product Facts I Surface M ount Leads I C ontact M aterial: phosphor bronze I H igh tem perature, black therm oplastic housings, 94V-0 rated, capable of w ithstanding IR or vapor- phase reflow I Gold/tin duplex plating for reliable m ating interconnection and solder interface I M etallic hold dow ns provide retention in the PC board prior to and during the reflow process … and strain relief after soldering I H old dow ns provide for proper lead-to-pad registration I C losed-entry receptacle housings provide lead-in ram p for positive m ating I R eceptacle contacts em ploy dual cantilever beam s for reliable connections I R ecognized under the C om ponent Program of Underw riters Laboratories Inc. File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 M od IV Surface M ount Vertical R eceptacle Assem blies, .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) Surface M ount R eceptacle Assem blies Perform ance Specifications Voltage R ating: 250 VA C C urrent R ating: 3 .0 am peres (m ax.) for single contact; 2.0 am peres (m ax.) per contact w hen connector is fully energized Operating Tem perature R ange (R eceptacle Assem blies): –65°C to +1 25°C Operating Tem perature R ange (H eaders): -65°C to +1 0 5°C D ielectric W ithstanding Voltage: 750 VA C Term ination R esistance: 1 2 m illiohm s (m ax.) Insulation R esistance: 50 0 0 m egohm s (m in.) M ating Force (R eceptacle Assem blies): 9.0 oz. [2.50 N ] (m ax.) per contact Unm ating Force (R eceptacle Assem blies): 1 .5 oz. [0 .42N ] (m in.) per contact D urability: Tested to 20 0 cycles (m in.) for .0 0 0 0 3 0 [0 .0 0 0 76] gold plated contacts AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV R eceptacle Assem blies, Single-R ow , Surface M ount, .10 0 [2 .54] C enterline w ith C om pliant Pin H old D ow ns N ote: A ll part num bers are R oH S com pliant. Surface Mount Receptacle Assemblies Surface M ount, Single-R ow , D ual E ntry w ith C om pliant Pin H olddow ns M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .0 0 0030 [0.0 0 0 76] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating B — D uplex .0 0001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to M ating P ost S election G uide — page 90 Perform ance Specifications — page 1 86 .2 65 [6 .7 3] Typ. .038 [0.97 ] .02 0 [0.51] .03 0 0.7 6 .02 5 [0.6 4] Typ. .1 40 [3.56 ] .1 00 [2.54] Typ. .1 07 [2.7 2] (L ocalized G old P late A rea) .2 08 [5.28 ] M ax. (D epressed) .1 48 [3.7 7 ] Point of C ontact D C A D B C P .C . B oard .069 [1.7 5] .090 [2.28 ] Typ. .060 [1.52] M in. .1 00 [2.54] .040±.003 [1.02±0.08 ] D ia. Typ. (For bottom entry or pass thru applica - tions) .042 ±.003 .075 [1.91] .1 1 0 [2.7 9] .2 2 8 [5.7 8 ] Recom m ended PC Board Pad Pattern (.008 [0.2 0] thick stencil) Packaged in Tubes Packaged in Tape & Reel N o. of D im ensions Contact Plating/ Part N os. Contact Plating/ Part N os. Pos. AB C D Plating A Plating B Plating C Plating A Plating B Plating C N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension, and .06 2 [1.57 ] for recom m ended board thickness if used in bottom entry application 3. N o center hold dow n. .042 ±.003 .042 ±.003 S tandoffs Typ.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV R eceptacle Assem blies, Single-R ow , Surface M ount, .10 0 [2 .54] x .10 0 [2 .54] C enterline E nd To E nd Stackable w ithout C om pliant Pin H olddow ns N ote: A ll part num bers are R oH S com pliant. Surface M ount R eceptacle Assem blies Surface M ount,Single-R ow , D ual E ntry, E nd to E nd Stackable M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .0 0 0030 [0.0 0 0 76] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating B — D uplex .0 0001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to M ating P ost S election G uide — page 90 Perform ance Specifications — page 1 86 Packaged in Tubes Packaged in Tape & Reel N o. of D im ensions Contact Plating/ Part N os. Contact Plating/ Part N os. Pos. AB Plating A Plating B Plating C Plating A Plating B Plating C 3 .300 [7 .6 2] .2 00 [5.08 ] 5-147 7 38 -2 5-147 7 37 -2 5-147 7 36 -2 5-147 7 23-2 5-147 7 28 -2 5-147 7 29-2 4 .400 [10.16 ] .300 [7 .6 2] 5-147 7 38 -3 5-147 7 37 -3 5-147 7 36 -3 5-147 7 23-3 5-147 7 28 -3 5-147 7 29-3 5 .500 [12.7 0] .400 [10.16 ] 5-147 7 38 -4 5-147 7 37 -4 5-147 7 36 -4 5-147 7 23-4 5-147 7 28 -4 5-147 7 29-4 6 .600 [15.24] .500 [12.7 0] 5-147 7 38 -5 5-147 7 37 -5 5-147 7 36 -5 5-147 7 23-5 5-147 7 28 -5 5-147 7 29-5 7 .700 [17 .7 8 ] .600 [15.24] 5-147 7 38 -6 5-147 7 37 -6 5-147 7 36 -6 5-147 7 23-6 5-147 7 28 -6 5-147 7 29-6 8 .8 00 [20.32] .700 [17 .7 8 ] 5-147 7 38 -7 5-147 7 37 -7 5-147 7 36 -7 5-147 7 23-7 5-147 7 28 -7 5-147 7 29-7 9 .900 [22.8 6 ]] .8 00 [20.32] 5-147 7 38 -8 5-147 7 37 -8 5-147 7 36 -8 5-147 7 23-8 5-147 7 28 -8 5-147 7 29-8 10 1 .000 [25.40] .900 [22.8 6 ] 5-147 7 38 -9 5-147 7 37 -9 5-147 7 36 -9 5-147 7 23-9 5-147 7 28 -9 5-147 7 29-9 11 1 .1 00 [27 .94] 1 .000 [25.40] 6 -147 7 38 -0 6 -147 7 37 -0 6 -147 7 36 -0 6 -147 7 23-0 6 -147 7 28 -0 6 -147 7 29-0 12 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 6 -147 7 38 -1 6 -147 7 37 -1 6 -147 7 36 -1 6 -147 7 23-1 6 -147 7 28 -1 6 -147 7 29-1 13 1 .300 [33.02] 1 .2 00 [30.48 ] 6 -147 7 38 -2 6 -147 7 37 -2 6 -147 7 36 -2 6 -147 7 23-2 6 -147 7 28 -2 6 -147 7 29-2 14 1 .400 [35.56 ] 1 .300 [33.02] 6 -147 7 38 -3 6 -147 7 37 -3 6 -147 7 36 -3 6 -147 7 23-3 6 -147 7 28 -3 6 -147 7 29-3 15 1 .500 [38 .10] 1 .400 [35.56 ] 6 -147 7 38 -4 6 -147 7 37 -4 6 -147 7 36 -4 6 -147 7 23-4 6 -147 7 28 -4 6 -147 7 29-4 16 1 .600 [40.6 4] 1 .500 [38 .10] 6 -147 7 38 -5 6 -147 7 37 -5 6 -147 7 36 -5 6 -147 7 23-5 6 -147 7 28 -5 6 -147 7 29-5 17 1 .700 [43.18 ] 1 .600 [40.6 4] 6 -147 7 38 -6 6 -147 7 37 -6 6 -147 7 36 -6 6 -147 7 23-6 6 -147 7 28 -6 6 -147 7 29-6 18 1 .8 00 [45.7 2] 1 .700 [43.18 ] 6 -147 7 38 -7 6 -147 7 37 -7 6 -147 7 36 -7 6 -147 7 23-7 6 -147 7 28 -7 6 -147 7 29-7 19 1 .900 [48 .26 ] 1 .8 00 [45.7 2] 6 -147 7 38 -8 6 -147 7 37 -8 6 -147 7 36 -8 6 -147 7 23-8 6 -147 7 28 -8 6 -147 7 29-8 20 2 .000 [50.8 0] 1 .900 [48 .26 ] 6 -147 7 38 -9 6 -147 7 37 -9 6 -147 7 36 -9 6 -147 7 23-9 6 -147 7 28 -9 6 -147 7 29-9 30 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 7 -147 7 38 -9 7 -147 7 37 -9 7 -147 7 36 -9 7 -147 7 23-9 7 -147 7 28 -9 7 -147 7 29-9 40 4.000 [101.6 0] 3.900 [99.06 ] 8 -147 7 38 -9 8 -147 7 37 -9 8 -147 7 36 -9 8 -147 7 23-9 8 -147 7 28 -9 8 -147 7 29-9 N otes: 1. TE recom m ends m ating gold or duplex plated headers w ith duplex plated receptacle assem blies. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension, and .06 2 [1.57 ] for recom m ended board thickness if used in bottom entry application. A B .2 65 [6 .7 3] .1 00 [2.54] .2 2 8 [5.7 8 ] .02 0 [0.51] S tandoff Typ. .060 [1.52] M in. .090 [2.28 ] .1 48 [3.7 7 ] .2 08 [5.28 ] M ax. .1 07 [2.7 2] Typ. .1 00 [2.54] Typ. .1 40 [3.56 ] .040±.003 [1.02±0.08 ] D ia. Typ. Recom m ended PC Board Pad Pattern (.008 [0.2 0] thick stencil) (For bottom entry or pass through applications) (L ocalized G old P late A rea) Point of C ontact

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV Surface M ount R eceptacle Assem blies, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enters N ote: A ll part num bers are R oH S com pliant. Surface Mount Receptacle Assemblies Surface M ount,D ouble R ow , D ual E ntry w ith H olddow ns M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .000030 [0.00076] gold on contact area, .0 001 50-.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder area all over .0 0 0 0 50 [0 .001 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder leads, all over .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — R efer to M ating P ost S election G uide — page 90 Perform ance Specifications — page 1 86 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 2 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. .1 00 [2.54] Typ. .050 [1.27 ] Typ. .1 98 [5.03] A .02 0 [0.51] Typ. .2 65 [6 .7 3] Typ. .08 3 [2.12] Typ. .2 66 [6 .7 5] .1 07 [2.7 2] Typ. .1 48 [3.7 6 ] Typ. B D C .1 1 0 [2.7 9] Typ. .2 38 [6 .05] Typ. .1 00 [2.54] Typ. .075 [1.91] Typ. .090 [2.29] Typ. .040±.003 [1.02±0.08 ] .040±.003 [1.02±0.08 ] .004 [0.10] Typ. .02 7±.002 [0.6 9±0.05] Typ. .060 [1.52] Typ. .040 [1.02] Typ. .1 00 [2.54] Typ. Recom m ended PC Board Layout (.008 [0.2 0] thick stencil) Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon Keying Plug Part N o. 8 62 8 6-1 (P lugs into receptacle contact) (For bottom entry or pass thru applications) (L ocalized G old P late A rea) Point of C ontact

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 M od IV Surface M ount R eceptacle Assem blies, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enters (Continued) N ote: A ll part num bers are R oH S com pliant. Surface M ount R eceptacle Assem blies Packaged in Tubes Packaged in Tape and Reel N o. of D im ensions Contact Plating/Part N os. Contact Plating/Part N os. Pos. A BCD Plating A Plating B Plating C Plating A Plating B Plating C N otes: 1. N o center holddow n. 2. To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension and .06 2 [1.57 ] for recom m ended board thickness in bottom entry applications. AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV Surface M ount R eceptacle Assem blies, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Surface Mount Receptacle Assemblies Surface M ount,D ouble R ow , D ual E ntry E nd to E nd Stackable M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex .000030 [0.00076] gold on contact area, .0 001 50-.000300 [0.0 0 381 -0 .0 0 762 ] m atte tin on solder area all over .0 0 0 0 50 [0 .001 2 7] nickel Plating B — D uplex .0 0 001 0 [0.0 0 0 2 54 ] gold on contact area, .00 0 1 50 -.0 0 0 30 0 [0 .0 0 381 -0.00762 ] m atte tin on solder area all over .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 50 -.000300 [0.0 0 381 -0 .0 0 762 ] tin-lead over .00 0 0 50 [0 .0 0 1 2 7] nickel R elated Product D ata M ateable H eaders — R efer to M ating P ost S election G uide — page 90 Perform ance Specifications — page 1 86 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 2 2 Application Specification 1 1 4 -2 50 1 8 Additional receptacle assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. .050 [1.27 ] M ax. .2 65 [6 .7 3] Typ. A .02 7±.002 [0.51] Typ. .060 [1.52] Typ. .1 00 [2.54] Typ. .1 00 [2.54] Typ. .2 38 [6 .05] Typ. .1 00 [2.54] Typ. .2 66 [6 .7 5] .1 98 ±.002 [5.03±0.05] .090 [2.29] .1 48 [3.7 6 ] .1 07 [2.7 2] B .040 [1.02] Typ. .1 00 [2.54] Typ. .004 [0.10] Typ. Recom m ended PC Board Pad Layout (.008 [0.2 0] thick stencil) (for Bottom Entry and Pass Through applications) Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon Keying Plug Part N o. 8 62 8 6-1 (P lugs into receptacle contact) (L ocalized G old P late A rea) Point of C ontact

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV Surface M ount R eceptacle Assem blies, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Surface M ount R eceptacle Assem blies Packaged in Tubes Packaged in Tape & Reel N o. of D im ensions Contact Plating/ Part N os. Contact Plating/ Part N os. Pos. AB Plating A Plating B Plating C Plating A Plating B Plating C 10 .500 [12.7 0] .400 [10.16 ] 5-147 7 41-5 5-147 7 40-5 5-147 7 39-5 5-147 105-5 5-147 104-5 5-147 106 -5 14 .700 [17 .7 8 ] .600 [15.24] 5-147 7 41-7 5-147 7 40-7 5-147 7 39-7 5-147 105-7 5-147 104-7 5-147 106 -7 20 1 .000 [25.40] .900 [22.8 6 ] 6 -147 7 41-0 6 -147 7 40-0 6 -147 7 39-0 6 -147 105-0 6 -147 104-0 6 -147 106 -0 22 1 .1 00 [27 .94] 1 .000 [25.40] 6 -147 7 41-1 6 -147 7 40-1 6 -147 7 39-1 6 -147 105-1 6 -147 104-1 6 -147 106 -1 26 1 .300 [33.02] 1 .2 00 [30.48 ] 6 -147 7 41-3 6 -147 7 40-3 6 -147 7 39-3 6 -147 105-3 6 -147 104-3 6 -147 106 -3 30 1 .500 [38 .10] 1 .400 [35.56 ] 6 -147 7 41-5 6 -147 7 40-5 6 -147 7 39-5 6 -147 105-5 6 -147 104-5 6 -147 106 -5 34 1 .700 [43.18 ] 1 .600 [40.6 4] 6 -147 7 41-7 6 -147 7 40-7 6 -147 7 39-7 6 -147 105-7 6 -147 104-7 6 -147 106 -7 36 1 .8 00 [45.7 2] 1 .700 [43.18 ] 6 -147 7 41-8 6 -147 7 40-8 6 -147 7 39-8 6 -147 105-8 6 -147 104-8 6 -147 106 -8 40 2 .000 [50.8 0] 1 .900 [48 .26 ] 7 -147 7 41-0 7 -147 7 40-0 7 -147 7 39-0 7 -147 105-0 7 -147 104-0 7 -147 106 -0 46 2 .300 [58 .42] 2 .2 00 [55.8 8 ] 7 -147 7 41-3 7 -147 7 40-3 7 -147 7 39-3 7 -147 105-3 7 -147 104-3 7 -147 106 -3 50 2 .500 [6 3.50] 2 .400 [6 0.96 ] 7 -147 7 41-5 7 -147 7 40-5 7 -147 7 39-5 7 -147 105-5 7 -147 104-5 7 -147 106 -5 6 2 3.1 00 [7 8 .7 4] 3.000 [7 6 .20] 8 -147 7 41-1 8 -147 7 40-1 8 -147 7 39-1 8 -147 105-1 8 -147 104-1 8 -147 106 -1 6 4 3.2 00 [8 1.28 ] 3.1 00 [7 8 .7 4] 8 -147 7 41-2 8 -147 7 40-2 8 -147 7 39-2 8 -147 105-2 8 -147 104-2 8 -147 106 -2 6 6 3.300 [8 3.8 2] 3.2 00 [8 1.28 ] 8 -147 7 41-3 8 -147 7 40-3 8 -147 7 39-3 8 -147 105-3 8 -147 104-3 8 -147 106 -3 7 0 3.500 [8 8 .90] 3.400 [8 6 .36 ] 8 -147 7 41-5 8 -147 7 40-5 8 -147 7 39-5 8 -147 105-5 8 -147 104-5 8 -147 106 -5 8 0 4.000 [101.6 0] 3.900 [99.06 ] 9-147 7 41-0 9-147 7 40-0 9-147 7 39-0 9-147 105-0 9-147 104-0 9-147 106 -0 N otes: 1.To obtain the m inim um m ating post length, add .020 [0.51] (not including the post lead in cham fer) to the m axim um point-of-contact dim ension and .06 2 [1.57 ] for recom m ended board thickness in bottom entry applications.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Tw o-Piece Printed C ircuit B oard C onnectors N ote: A ll part num bers are R oH S com pliant. Printed Circuit Board Connectors Product Facts I Tw o-Piece reliability I Tw o- and three-row system s available I Short signal path for VLSI I R eceptacles em ploy dual cantilever beam s and built- in anti-overstress to provide reliable connections I B uilt-in guides provide alignm ent before contact engagem ent I C losed entry receptacle housings provide lead-in ram p for positive m ating of contacts I Shrouded headers provide full pin protection I Polarized headers I Vertical headers available w ith AC TION PIN posts or .0 2 5 [0 .64] square solder posts I R epairable AC TION PIN posts I Sim ple seating tooling for headers w ith AC TION PIN posts I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 3-R ow H eader 5-1 032 64-3 A C TION P IN Posts S older Posts R eceptacle C ontact (D ouble B eam w ith A nti-Overstress) B oard R etention Feature A vailable D ouble-R ow M ake First/B reak L ast H eader (Part N os. available upon request) 3-R ow C losed Entry R eceptacle 5-534974-8 5-1 02 690-3 V ertical H eader w ith A C TION P IN Posts 5-534972 -2 V ertical R eceptacle 5-532 956-3 H orizontal R eceptacle 5-532 956-3 H orizontal R eceptacle 6-1 02 58 9-2 3/4 S hroud, R ight A ngle H eader For draw ings, technical data or sam ples, contact your T E sales engineer or call the T E P roduct Inform ation C enter: 1 -80 0 -52 2 -6752 R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Tw o-Piece Printed C ircuit B oard C onnectors (Continued) Printed C ircuit B oard C onnectors Tem perature R ating — Headers and R eceptacles — –65°C to + 1 2 5°C (black therm oplastic housings, 94 V-0 rated) D urability (Tested to) — 2 0 0 cycles for .0 0 0 0 30 [0 .0 0 0 76] gold plating; 75 cycles for .0 0 0 0 1 5 [0 .0 0 0 38] gold plating M ating Force — 8 oz. [2 .2 2 N] m axim um per contact Unm ating Force — .75 oz. [0 .2 N] m inim um per contact during third m ating cycle Perform ance Specifications C urrent R ating — 3 am peres m ax. for single contact; 2 am peres m ax. per contact for fully energized connector Voltage R ating — 2 50 VA C D ielectric R ating — 750 VA C rm s betw een contacts for one m inute Term ination R esistance — 1 2 m illiohm s m ax. at 1 00 m illiam peres test current, and 50 m illivolts open cir - cuit voltage Insulation R esistance — 1 0 0 0 m egohm s after tem perature/hum idity cycling A M PM O D U Tw o-Piece Printed C ircuit B oard connectors are designed to reliably and econom ically m eet the packaging and interconnection requirem ents of today’s sophisticated electronics. The double row system is produced in 1 0 thru 20 0 positions in the vertical headers and horizontal receptacles, and 1 0 thru 1 60 positions in the right angle headers and vertical receptacles. The A M PM O D U three-row connector system is produced in 3 0 through 3 0 0 positions (straight post headers and m ating horizontal receptacles). B oth tw o- and three-row vertical headers are available w ith press-fit A C TIO N PIN posts or standard .0 25 [0 .64] square solder posts. There is a sim ple seating tool for headers w ith A C TIO N PIN posts. A board retention feature is offered in the tw o-row horizontal receptacles, tw o-row right angle headers and tw o- and three-row vertical headers. B uilt-in guides assure accurate header and receptacle alignm ent before contact engagem ent. C losed entry receptacle housings provide a lead-in ram p for positive m ating of contacts.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacle Assem blies, B oard M ount, D ouble-R ow , C losed E ntry, .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Printed Circuit Board Connectors M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.00076] gold on contact area, .000050- .0001 00 [0.001 2 7-0.002 54 ] m atte tin on solder area, w ith entire contact under - plated .000050 [0.001 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 0 50 -.0 0 0 1 0 0 [0 .0 0 1 2 7-0.002 54 ] m atte tin on solder area, w ith entire con - tact underplated .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — pages 1 98, 1 99 Perform ance Specifications — page 1 94 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 1 7 Application Specification 1 1 4 -90 0 9 Additional receptacle assem bly sizes and solder tail lengths are available; m inim um order quantities m ay apply. Consult TE. Receptacle Assem bly Part N os. Receptacle Assem bly Part N os. Pos. AB Standard Solder Tails Board Retention Tails Standard Solder Tails Plating A Plating B Plating A Plating B Plating A 12 .8 58 [21.7 9] .500 [12.7 0] 5-532956 -1 5-532955-1 5-534204-2 5-53497 5-5 5-533009-1 16 1 .058 [26 .8 7 ] .700 [17 .7 8 ] 5-532956 -2 — 6 -534204-0 6 -53497 5-5 — 20 1 .2 58 [31.95] .900 [22.8 6 ] 5-532956 -3 5-532955-3 5-534204-9 5-53497 5-6 — 24 1 .458 [37 .03] 1 .1 00 [27 .94] 5-532956 -4 5-532955-4 6 -534204-1 5-53497 5-7 — 30 1 .758 [44.6 5] 1 .400 [35.56 ] 5-532956 -5 5-532955-5 5-534204-4 5-53497 5-8 5-533009-5 36 2 .058 [52.27 ] 1 .700 [43.18 ] 5-532956 -6 5-532955-6 5-534204-3 5-53497 5-9 — 40 2 .2 58 [57 .35] 1 .900 [48 .26 ] 5-532956 -7 5-532955-7 6 -534204-2 6 -53497 5-0 — 50 2 .758 [7 0.05] 2 .400 [6 0.96 ] 5-532956 -8 5-532955-8 5-534204-1 6 -53497 5-1 5-533009-8 6 0 3.2 58 [8 2.7 5] 2 .900 [7 3.6 6 ] 5-532956 -9 5-532955-9 5-534204-5 6 -53497 5-2 5-533009-9 7 0 3.758 [95.45] 3.400 [8 6 .36 ] 6 -532956 -0 6 -532955-0 6 -534204-3 6 -53497 5-3 6 -533009-0 7 2 3.8 58 [97 .99] 3.500 [8 8 .90] 6 -532956 -1 6 -532955-1 6 -534204-4 —— 8 0 4.2 58 [108 .15] 3.900 [99.06 ] 6 -532956 -2 6 -532955-2 5-534204-8 6 -53497 5-4 6 -533009-2 8 6 4.558 [115.7 7 ] 4.2 00 [106 .6 8 ] 6 -532956 -3 6 -532955-3 —— 6 -533009-3 90 4.758 [120.8 5] 4.400 [111.7 6 ] 6 -532956 -4 6 -532955-4 —— — 96 5.058 [128 .47 ] 4.700 [119.38 ] 6 -532956 -5 6 -532955-5 6 -534204-5 — 6 -533009-5 100 5.2 58 [133.55] 4.900 [124.46 ] 6 -532956 -6 6 -532955-6 5-534204-6 5-53497 5-1 6 -533009-6 110 5.758 [146 .25] 5.400 [137 .16 ] 6 -532956 -7 6 -532955-7 6 -534204-6 —— 120 6.2 58 [158 .95] 5.900 [149.8 6 ] 6 -532956 -8 6 -532955-8 5-534204-7 5-53497 5-2 6 -533009-8 130 6.758 [17 1.6 5] 6.400 [16 2.56 ] 7 -532956 -0 7 -532955-0 6 -534204-7 —— 200 1 0.2 58 [26 0.55] 9.900 [251.46 ] 7 -532956 -3 7 -532955-3 7 -534204-0 5-53497 5-4 — N otes: 2. R eceptacle assem blies w ith low force contacts are available, consult TE. 3. .256 [6 .50] m inim um positive pin stop to prevent shorting betw een row s. .32 0 [8 .13] .1 44 [3.6 6 ] D ia. (2 P lc.) .1 79 [4.55] Typ. .1 00 [2.54] .1 2 5 [3.17 ] (L ocalized G old P late A rea) .2 56 [6 .50] (S ee N ote 3.) .1 1 5 [2.92] (S ee N ote 2) .2 38 [6 .05] CL CL .31 0±.01 0 [7 .8 8 ±0.25] .065±.005 [1.6 5±0.13] to .1 00±.005 [2.54±0.13] .31 0±.002 [7 .8 7 ±0.05] .035±.003 [0.8 9±0.08 ] Typ. D ia. (Finished H ole) .1 00±.003 [2.54±0.08 ] .069 [1.7 5] .1 1 5 or .1 45 [2.92 or 3.6 8 ] (S ee N ote 1) .1 1 5 or .1 45 [2.92 or 3.6 8 ] (S ee N ote 2) A B Standard Solder Tails Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) Board Retention Tails Tolerances not to accum ulate w ithin one connector pattern. M aterial — Natural color nylon Keying Plug M in. .1 74 [4.42] (Point of C ontact) M ax. Part N o. 8 62 8 6-1 (P lugs into receptacle contact) H orizontal M ount (w ith Guide Pin Slots and Standoffs)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacle Assem blies, B oard M ount, D ouble-R ow , C losed E ntry, .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Printed C ircuit B oard C onnectors Vertical M ount (w ith Guide Pin Slots and Standoffs) M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold on contact area, .0 0 0 0 50 -.0 001 00 [0.0 0 1 2 7-0 .0 0 2 54 ] m atte tin on solder area, w ith entire contact underplated .00 0 0 50 [0 .0 0 1 2 7] nickel R elated Product D ata M ateable H eaders — pages 1 98, 1 99 Perform ance Specifications — page 1 94 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 1 7 Application Specification 1 1 4 -90 0 9 Additional receptacle assem bly sizes and solder tail lengths are available; m inim um order quantities m ay apply. Consult TE. .1 1 5 [2.92] .1 2 9 [3.28 ] Typ. .32 0 [8 .13] .41 0 [10.41] .2 38 [6 .05] .1 00 [2.54] Typ. .1 79 [4.55] Typ. .1 2 5 [3.18 ] (L ocalized G old P late A rea) .1 00 [2.54] .1 00 [2.54] .1 44 [3.6 8 ] D ia. .069 [1.7 5] Typ. A B ±.008 [±0.20] .1 00±.003 [2.54±0.08 ] .1 00±.003 [2.54±0.08 ] .035±.003 [0.8 9±0.08 ] Typ. D ia. Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) Tolerances not to accum ulate w ithin one connector pattern. Keying Plug N o. of D im ensions Receptacle Assem bly Pos. AB Part N os. 30 1 .758 [44.6 5] 1 .400 [35.56 ] 5-53497 2-1 40 2 .2 58 [57 .35] 1 .900 [48 .26 ] 5-53497 2-2 50 2 .758 [7 0.05] 2 .400 [6 0.96 ] 5-53497 2-3 6 0 3.2 58 [8 2.7 5] 2 .900 [7 3.6 6 ] 5-53497 2-4 7 0 3.758 [95.45] 3.400 [8 6 .36 ] 5-53497 2-5 8 0 4.2 58 [108 .15] 3.900 [99.06 ] 5-53497 2-6 90 4.758 [120.8 5] 4.400 [111.7 6 ] 5-53497 2-7 100 5.2 58 [133.55] 4.900 [124.46 ] 5-53497 2-8 120 6.2 58 [158 .95] 5.900 [149.8 6 ] 6 -53497 2-0 M aterial — Natural color nylon Part N o. 8 62 8 6-1 (P lugs into receptacle contact)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacle Assem blies, B oard M ount, Triple-R ow , C losed E ntry, .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Printed Circuit Board Connectors H orizontal M ount (w ith Guide Pin Slots and Standoffs) M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — P hosphor bronze, plated .00 0 0 30 [0 .0 0 0 76] gold in m ating area, .00 0 0 50 -.0 0 0 1 0 0 [0 .0 0 1 2 7-0.002 54 ] m atte tin on solder area, w ith entire contact underplated .0 0 0050 [0.001 2 7] nickel R elated Product D ata M ateable H eaders — page 2 01 Perform ance Specifications — page 1 94 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 1 7 Application Specification 1 1 4 -90 0 9 Additional receptacle assem bly sizes and solder tail lengths are available; m inim um order quantities m ay apply. Consult TE. .41 0 [10.41] .1 45 [3.6 8 ] .1 45 [3.6 8 ] .1 2 5 [3.18 ] (L ocalized G old P late A rea) .1 1 5 [2.92] .1 1 5 [2.92] .400 [10.16 ] .400 [10.16 ] .1 00 [2.54] .1 00 [2.54] .069 [1.7 5] .338 [8 .59] .1 44 [3.6 6 ] D ia. Typ. .1 00 [2.54] Typ. .1 79 [4.55] Typ. .300 [7 .6 2] .300 [7 .6 2] B A .035±.003 [0.8 9±0.08 ] Typ. D ia. Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) Tail Length Tolerances not to accum ulate w ithin one connector pattern. Keying Plug N o. of D im ensions Receptacle Assem bly Part N os. Pos. AB Plating A 7 2 2 .658 [6 7 .51] 2 .300 [58 .42] 5-53497 4-3 93 3.358 [8 5.29] 3.000 [7 6 .20] 15-53497 4-4 96 3.458 [8 7 .8 3] 3.1 00 [7 8 .7 4] 1- 5-53497 4-5 150 5.2 58 [133.55] 4.900 [124.46 ] 1- 5-53497 4-8 210 7.2 58 [18 4.35] 6.900 [17 5.26 ] 6 -53497 4-1 .065±.005 [1.6 5±0.13] M aterial — Natural color nylon Part N o. 8 62 8 6-1 (P lugs into receptacle contact) .1 00±.003 [2.54±0.08 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System H eaders, Straight Post, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Printed C ircuit B oard C onnectors Solder Posts and AC TION PIN Posts (w ith Pin Protection and Guide Pins) M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] m atte tin on term ination end, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] m atte tin on term ination end, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel Plating C — Selectively plated .000030 [0.0 0 0 76] gold on contact area and .00 0 0 1 5 [0 .0 0 0 38] gold on term ination end, w ith gold flash over .000050 [0.0 0 1 2 7] nickel on entire post R elated Product D ata M ateable R eceptacles — pages 1 95, 1 96 Perform ance Specifications — page 1 94 AC TION PIN Posts — pages 1 50, 1 51 Application Tooling — pages 1 52 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 1 7 Application Specification 1 1 4 -90 0 9 Additional header sizes are available; m inim um order quantities m ay apply. Consult TE. .08 5 [2.16 ] .065 [1.6 6 ] R (2 P lc.) .1 30 [3.30] (2 P lc.) .040 [1.02] (4 S ides) .1 00 [2.54] Pos. R ef. B oard R etention Tails (w here indicated) .51 5 [13.08 ] .040±.003 [1.02±0.08 ] (Finished H ole) .0453±.001 [1.02±0.03] (D rilled H ole) .2 00 [5.08 ] .1 1 0 [2.7 9] .440 [11.18 ] .1 30 [3.30] .32 0 [8 .13] .1 8 0 [4.57 ] .090 [2.29] .2 00 [5.08 ] (L ocalized G old P late A rea) A B Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) Tolerances not to accum ulate w ithin one connector pattern. H eader Part N os. w ith .1 8 0 [4.57] Tail Length N o. of D im ensions Standard Solder Tails Board Retention Tails Pos. AB Plating A Plating B Plating A Plating B 12 .98 0 [24.8 9] .500 [12.7 0] 5-1026 92-1 5-10256 7 -1 6 -53497 8 -6 5-534257 -5 16 1 .1 8 0 [29.97 ] .700 [17 .7 8 ] 6 -1026 92-5 — 5-53497 8 -2 6 -534257 -4 20 1 .38 0 [35.05] .900 [22.8 6 ] 6 -1026 92-6 6 -10256 7 -1 5-53497 8 -3 5-534257 -6 24 1 .58 0 [40.13] 1 .1 00 [27 .94] 5-1026 92-2 5-10256 7 -2 5-53497 8 -4 5-534257 -7 30 1 .8 8 0 [47 .7 5] 1 .400 [35.56 ] 6 -1026 92-7 6 -10256 7 -3 5-53497 8 -5 5-534257 -8 36 2 .1 8 0 [55.37 ] 1 .700 [43.18 ] 5-1026 92-3 5-10256 7 -3 5-53497 8 -6 5-534257 -9 40 2 .38 0 [6 0.45] 1 .900 [48 .26 ] 6 -1026 92-3 6 -10256 7 -2 5-53497 8 -7 6 -534257 -0 50 2 .8 8 0 [7 3.15] 2 .400 [6 0.96 ] 5-1026 92-4 5-10256 7 -6 5-53497 8 -8 6 -534257 -5 6 0 3.38 0 [8 5.8 5] 2 .900 [7 3.6 6 ] 5-1026 92-5 5-10256 7 -4 5-53497 8 -9 6 -534257 -1 7 0 3.8 8 0 [98 .55] 3.400 [8 6 .36 ] 6 -1026 92-4 6 -10256 7 -0 6 -53497 8 -5 6 -534257 -2 7 2 3.98 0 [101.09] 3.500 [8 8 .90] 6 -1026 92-8 6 -10256 7 -6 6 -53497 8 -0 — 8 0 4.38 0 [111.25] 3.900 [99.06 ] 5-1026 92-6 5-10256 7 -8 6 -53497 8 -1 5-534257 -1 8 6 4.68 0 [118 .8 7 ] 4.2 00 [106 .6 8 ] 6 -1026 92-9 6 -10256 7 -7 —— 90 4.8 8 0 [123.95] 4.400 [111.7 6 ] 6 -1026 92-2 6 -10256 7 -4 —— 96 5.1 8 0 [131.57 ] 4.700 [119.38 ] 5-1026 92-7 5-10256 7 -5 6 -53497 8 -7 — 100 5.38 0 [136 .6 5] 4.900 [124.46 ] 5-1026 92-8 5-10256 7 -9 6 -53497 8 -8 5-534257 -2 110 5.8 8 0 [149.35] 5.400 [137 .16 ] 6 -1026 92-0 6 -10256 7 -5 6 -53497 8 -2 — 120 6.38 0 [16 2.05] 5.900 [149.8 6 ] 5-1026 92-9 5-10256 7 -7 6 -53497 8 -3 5-534257 -3 130 6.8 8 0 [17 4.7 5] 6.400 [16 2.56 ] 7 -1026 92-0 6 -10256 7 -9 6 -53497 8 -9 — 200 1 0.38 0 [26 3.6 5] 9.900 [251.46 ] 6 -1026 92-1 7 -10256 7 -1 5-53497 8 -1 6 -534257 -9 N ote: H eaders w ith m ake first/break last posts can be m ade available, consult TE. .02 5 [0.64] Square Board Retention Tails .1 8 0 [4.57 ] .1 00±.003 [2.54±0.08 ] 1 2 3 .1 00±.003 [2.54±0.08 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System H eaders, Straight Post, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Printed Circuit Board Connectors S ee chart below .02 5 [0.64] Square ACTIO N PIN Tails H eader Part N os. w ith ACTIO N PIN Posts 20 1 .38 0 [35.05] .900 [22.8 6 ] 6 -1026 90-3 5-103291-6 —— — 24 1 .58 0 [40.13] 1 .1 00 [27 .94] 5-1026 90-2 5-103291-7 —— — 36 2 .1 8 0 [55.37 ] 1 .700 [43.18 ] 5-1026 90-3 5-103291-9 —— — 40 2 .38 0 [6 0.45] 1 .900 [48 .26 ] 6 -1026 90-6 5-103291-2 —— — 50 2 .8 8 0 [7 3.15] 2 .400 [6 0.96 ] 5-1026 90-4 6 -103291-0 —— — 6 0 3.38 0 [8 5.8 5] 2 .900 [7 3.6 6 ] 5-1026 90-5 6 -103291-1 —— — 7 0 3.8 8 0 [98 .55] 3.400 [8 6 .36 ] 6 -1026 90-7 6 -103291-2 —— — 8 0 4.38 0 [111.25] 3.900 [99.06 ] 5-1026 90-6 6 -103291-4 —— — 90 4.8 8 0 [123.95] 4.400 [111.7 6 ] 6 -1026 90-1 6 -103291-6 —— — 96 5.1 8 0 [131.57 ] 4.700 [119.38 ] 5-1026 90-7 6 -103291-8 —— — 100 5.38 0 [136 .6 5] 4.900 [124.46 ] 5-1026 90-8 6 -103291-9 —— 1027 7 7 -3 120 6.38 0 [16 2.05] 5.900 [149.8 6 ] 5-1026 90-9 7 -103291-1 5-1026 91-9 1-1026 6 6 -1 1027 7 7 -1 130 6.8 8 0 [17 4.7 5] 6.400 [16 2.56 ] —— — 1026 6 6 -9 — N otes: 1. Other header sizes can be m ade available upon request. H eaders w ith A C TION P IN posts are for use w ith .093 [2.36 ] nom inal or thicker P C boards. 2. A pplication tooling for installing headers w ith A C TION P IN posts is show n on pages 152 and 153. 3. H eaders w ith .250 [6 .35] tail length can be m ade available w ith m ake first/break last contacts, consult TE. 4. P lated through holes to be prepared per recom m endations found on page 151.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System H eaders, R ight-Angle Post, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Printed C ircuit B oard C onnectors C ard E xtender (w ith Pin Protection and Guide Pins) M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] m atte tin on term ination end, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] m atte tin on term ination end, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable R eceptacles — pages 1 95, 1 96 Perform ance Specifications — page 1 94 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 1 7 Application Specification 1 1 4 -90 0 9 Additional header sizes are available; m inim um order quantities m ay apply. Consult TE. .065 [1.6 5] R (2 P lc.) .040 [1.02] Typ. .2 00 [5.08 ] Typ. .1 8 5 [4.7 0] Typ. .1 00 [2.54] Pos. R ef. B oard R etention Tails (w here indicated) .599 [15.21] .762 [19.35] M ax. .035±.003 [0.8 9±0.08 ] D ia. Typ. (S tandard Finished H ole) .1 57 [3.99] .1 57 [3.99] .32 0 [8 .13] .32 0 [8 .13] .1 00 [2.54] .1 2 5 [3.18 ] .1 2 5 [3.18 ] .1 00 [2.54] (L ocalized G old P late A rea) .040±.003 [1.02±0.08 ] (Finished H ole w /B d. R et.) A B Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) Tolerances not to accum ulate w ithin one connector pattern. .02 5 [0.64] Square Board Retention Tails .1 00±.003 [2.54±0.08 ] H eader Part N os. w ith .1 2 5 [3.1 8 ] Tail Length N o. of D im ensions Standard Solder Tails Board Retention Tails Pos. AB Plating A Plating B Plating A 12 .98 0 [24.8 9] .500 [12.7 0] 6 -1028 02-2 5-10258 9-8 5-534245-5 16 1 .1 8 0 [29.97 ] .700 [17 .7 8 ] 6 -1028 02-4 — 5-534245-4 20 1 .38 0 [35.05] .900 [22.8 6 ] 6 -1028 02-5 6 -10258 9-2 5-534245-6 24 1 .58 0 [40.13] 1 .1 00 [27 .94] 6 -1028 02-3 5-10258 9-6 5-534245-7 30 1 .8 8 0 [47 .7 5] 1 .400 [35.56 ] 6 -1028 02-6 5-10258 9-4 5-534245-2 36 2 .1 8 0 [55.37 ] 1 .700 [43.18 ] 5-1028 02-3 5-10258 9-2 5-534245-8 40 2 .38 0 [6 0.45] 1 .900 [48 .26 ] 5-1028 02-8 6 -10258 9-3 — 50 2 .8 8 0 [7 3.15] 2 .400 [6 0.96 ] 5-1028 02-4 5-10258 9-5 5-534245-1 6 0 3.38 0 [8 5.8 5] 2 .900 [7 3.6 6 ] 5-1028 02-9 5-10258 9-7 — 7 2 3.98 0 [101.09] 3.500 [8 8 .90] 6 -1028 02-7 6 -10258 9-7 — 8 0 4.38 0 [111.25] 3.900 [99.06 ] 5-1028 02-5 5-10258 9-1 6 -534245-0 90 4.8 8 0 [123.95] 4.400 [111.7 6 ] 6 -1028 02-0 6 -10258 9-4 — 100 5.38 0 [136 .6 5] 4.900 [124.46 ] 5-1028 02-6 5-10258 9-3 6 -534245-1 120 6.38 0 [16 2.05] 5.900 [149.8 6 ] 5-1028 02-2 6 -10258 9-1 5-534245-3 130 6.8 8 0 [17 4.7 5] 6.400 [16 2.56 ] 6 -1028 02-9 6 -10258 9-9 6 -534245-3 N ote: H eaders w ith m ake first/break last posts can be m ade available, consult TE. 2 3 4 .1 00±.003 [2.54±0.08 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System H eaders, Straight Post, Triple-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Printed Circuit Board Connectors H eader Part N os. w ith .1 8 0 [4.57] Tail Length Standard Board N o. of D im ensions Solder Tails Retention Tails Pos. AB Plating A Plating A 7 2 2 .78 0 [7 0.6 1] 2 .300 [58 .42] 5-10326 4-1 5-534258 -1 96 3.48 0 [8 8 .39] 3.000 [7 6 .20] — 5-534258 -3 150 5.38 0 [136 .6 5] 4.900 [124.46 ] 5-10326 4-3 — 210 7.38 0 [18 7 .45] 6.900 [17 5.26 ] 5-10326 4-4 — Solder Posts (w ith Pin Protection and Guide Pins) M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated Posts — P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] m atte tin on term ination end, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable R eceptacles — page 1 97 Perform ance Specifications — page 1 94 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 1 7 Application Specification 1 1 4 -90 0 9 Additional header assem bly sizes are available; m inim um order quantities m ay apply. Consult TE. .065 [1.6 5] R (2 P lc.) .040 [1.02] (4 S ides) .2 00 [5.08 ] .2 00 [5.08 ] (L ocalized G old P late A rea) .1 00 [2.54] Pos. R ef. B oard R etention Tails (w here indicated) .61 5 [15.6 2] .2 1 0 [5.33] .1 00 [2.54] .2 00 [5.08 ] .440 [11.18 ] .08 5 [2.16 ] .1 8 0 [4.57 ] .1 00 [2.54] .0453±.001 [1.151±0.03] (D rilled H ole) .040±.003 [1.6 6 ±0.08 ] (Finished H ole) A B Recom m ended PC Board H ole Layout (for .055 [1 .40] m in. thick PC board) Tolerances not to accum ulate w ithin one connector pattern. .02 5 [0.64] Square Board Retention Tails 1 2 3 .32 0 [8 .13] .090 [2.29] .1 8 0 [4.57 ] .1 00±.003 [2.54±0.08 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System H eaders, VR M (Voltage R egulator M odule), .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Printed C ircuit B oard C onnectors N o D im ensions of AB H eader Part N o. Pos Standard Solder Tails .2 50 Length ACTIO N PIN Tails 30 2.450 [6 2.23] 1.400 [35.56 ] 5-146 205-1 — 40 3.095 [7 8 .6 2] 1.900 [48 .26 ] — 5-147 254-1 3.100 [7 8 .7 4] 1.900 [48 .26 ] 5-146 315-1 — Solder Posts and AC TION PIN Posts (w ith Pin Protection, Guide R ibs, and Latching) M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated Posts — C opper alloy, duplex plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, .00 0 1 0 0 -.0 0 0 2 0 0 [0 .0 0 2 54 -0.00508] m atte tin on term ination end, w ith entire post underplated .0 0 0 0 50 [0.001 2 7] nickel R elated Product D ata M ateable R eceptacles — pages 1 95, 1 96 Perform ance Specifications — page 1 94 AC TION PIN Posts — page 1 50 , 1 51 Application Tooling — pages 1 52 Technical D ocum ents — page 2 76 Product Specification 1 08-2 50 1 7 Application Specification 1 1 4 -90 0 9 .440 [11.18 ] .51 5 [13.08 ] .1 2 0 [3.05] .32 0 [8 .13] .2 90 [7 .37 ] .040 +.003 [1.02 +.08 ] .1 2 5 [3.18 ] .1 00 [2.54] .52 5 [13.33] .1 00 [2.54] H ousing Outline .1 1 0 [2.7 9] A B B Recom m ended PC Board H ole Layout

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Accessories: E nd Shrouds for M achine-Applied Posts N ote: A ll part num bers are R oH S com pliant. Printed Circuit Board Connectors Technical D ocum ents — page 2 76 M aterial — B lack therm oplastic, flam e retardant Typical Assem bly Single-R ow , .10 0 [2 .54] C enters Part N o. 10 2 338-1 M aterial — B lack glass-filled polyester D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enters Part N o. 10 2 114-1 .066 [1.6 8 ] .2 90 [7 .37 ] .1 64 [4.17 ] .050 [1.27 ] .71 2 [18 .08 ] .059 [1.50] M ax. .350 [8 .8 9] .066 [1.6 8 ] .02 9 [0.7 4] D ia. .405 [10.29] .2 8 0 [7 .11] .1 50 [3.8 1] .050 [1.27 ] .8 90 [22.6 1] .059 [1.50] M ax. .350 [8 .8 9] .066 [1.6 8 ] .02 9 [0.7 4] D ia. M ating Polarized H ousing End S hroud B oard M ounted S traight Posts B reak L ine for 7 Pos. or L arger H eader P C B oard B reak L ine for 14 Pos. or L arger H eader

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Accessories: B arrier Insert, Part N o. 87743-1 N ote: A ll part num bers are R oH S com pliant. Printed C ircuit B oard C onnectors M aterial B lack polyester Technical D ocum ents — page 2 76 The barrier insert can be used on double row headers (.1 0 0 x .1 0 0 [2.54 x 2.54] centers), including shrouded versions— 3 and 4 sides, as w ell as unshrouded straight post headers. W ith one barrier insert several configurations can be obtained, providing headers w ith capabilities of accept - ing various com binations of polarized and non-polarized A M PM O D U connectors. F or unshrouded headers, the barrier insert is used to establish polarization and to com partm entalize the header. F or shrouded headers, the barrier insert is used to com partm entalize the header, w hile m aintaining polarization. The barrier insert itself is notched to facilitate cutting off the ends w ith a sim ple tool such as tin snips or scissors to achieve the desired configuration. B arrier Insert C utoffs F ig. 1 Partial Cutoff (L eft and R ight S ides) F ig. 2 Partial Cutoff (L eft S ide) Com plete Cutoff (R ight S ide) F ig. 3 Com plete Cutoff (L eft S ide) Partial Cutoff (R ight S ide) F ig. 4 Com plete Cutoff (L eft and R ight S ides) Typical B arrier Insert Applications For Unshrouded D ouble-R ow , Straight Post H eaders, .10 0 x .10 0 [2 .54 x 2 .54] C enters For Shrouded D ouble-R ow , 3 and 4 Sided H eaders, .10 0 x .10 0 [2 .54 x 2 .54] C enters N ote: A ll configurations of barrier inserts com partm entalize headers and m aintain polarization, except bar (Fig. 4) configuration, w hich is used prim arily for com partm entalizing headers. N ote: R ight-angle (Figs. 2 and 3) and “T” (Fig. 1) configurations of barrier insert establish polarization; bar (Fig. 4) configuration of barrier insert com partm entalizes header. .446 [11.33] .037 [0.94] .31 4 [7 .98 ] .1 2 7 [3.23] .340 [8 .6 4] .030 [0.7 6 ] 45° .030 [0.7 6 ] .090 [2.29] .1 00 [2.54] .08 7 [2.21] .047 [1.19] .094 [2.39] S ee Fig. 3 S ee Fig. 4 S ee Fig. 1 S ee Fig. 2 S ee Fig. 2 S ee Fig. 4 S ee Fig. 1 S ee Fig. 3 .031 -.043 [0.7 9-1.09] D ia. x .2 50 [ [6 .35] D eep— rem ainder .02 9±.001 [0.7 4±0.03] D ia. Thru T yp. (2)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Accessories: Snap-In Polarizer for Low Profile H eaders N ote: A ll part num bers are R oH S com pliant. Printed Circuit Board Connectors M aterial B lack therm oplastic, flam e retardant Part N um bers 499991-2 (P ackaged 50 per bag) 499991-3 (P ackaged 1 000 per bag) R elated Product D ata Low Profile H eaders used w ith — pages 1 35-1 4 0 Orient the polarizer so that the polarizer latch is on the sam e side as the inner w all (post side) of the header housing. S lide the polarizer over the polarizing slot of the housing until the latch engages the hole. S nap off the tab at the break line next to the housing. U sing the rem aining polarizer, repeat the process for the other housing location. The snap-in polarizer provides m ilitary polarization for low profile headers. Installation of the polarizer is as follow s: N ote: For Post S hunts, contact TE. .335 [8 .51] .1 34 [3.40] .335 [8 .51] .1 34 [3.40] B reak L ine (S ee below.) B reak L ine (S ee below.) B reak L ine

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Locking C lip C ontacts and H ousings Locking C lip C ontacts and H ousings .1 00 x .1 00 [2.54 x 2.54] C ontact C learance H ole Product Facts I Self-retaining contacts provide perm anent connection w ith quick connect and disconnect I Fast, easy installation w ith no additional locking hardw are required I M ates w ith .0 2 5 [0 .64] square posts in a variety of configurations I Single- and double-row configurations in up to 2 0 positions on .10 0 [2 .54] centers I M odular design perm its end-to-end stacking (double- row only) for circuit grouping I C hoice of tin or select gold plating I H ousings m ade of 94V-0 rated glass-filled polyester I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 .2 73/.350* [6 .93/8 .8 9] (w ith housing) Extraction Tool S lot .2 00/.2 77* [5.08 /7 .04] (w ithout housing P C B oard S ingle R ow B oth Ends C losed (Page 208 ) S ingle C ontact (Page 207 ) B oth Ends C losed (for specified no. of circuits— housing size) (Page 209) R ight End Open (for stacking to right side) (Page 209) L eft End Open (for stacking to left side) (Page 209) Typical Application *If post is longer than m axim um specified, post tip m ay butt against w ire ends. Perform ance C haracteristics C ontact C urrent R ating — 3 am peres Term ination R esistance — 1 2 m illiohm s (m ax.) — G old plated contacts 1 6 m illiohm s (m ax.) — Tin plated contacts D urability — R ef. P roduct S pecification 1 0 8-360 2 8 and 1 08-360 2 8-1 .02 5 [0.6 4] S q. Posts R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Locking Clip Contacts and Housings Locking C lip C ontacts N ote: A ll part num bers are R oH S com pliant. W ire C rim p C ontacts w ith Insulation Support M aterial and Finish C ontact Spring — S tainless steel Pating A — S electively plated .00 0 0 50 [0.001 2 7] gold on contact area, w ith gold flash over .0 0 0 050 [0.001 2 7] nickel on entire contact Pating B — S electively plated .00 0 0 30 [0.00076] gold on contact area, w ith gold flash over .0 0 0 050 [0.001 2 7] nickel on entire contact Pating C — .0 0 0 1 0 0 -.0002 00 [0.002 54 -0.00508] bright tin over .00 0 0 50 [0 .0 0 1 2 7] nickel on entire contact W ire H arnessing If necessary, w ires can be grouped w ith cable ties and secured to a panel w ith fixed clam ps. How ever, locking clip contacts m ust be free to float w ithin the connector housings to allow proper extraction. Therefore, harnessing hardw are or the use of m ultiple term inations per contact m ust not restrict the free-floating action of contacts in the housing. F or m ore inform ation request Insulation and B undling Products C atalog 1 241 3 2. Extraction Tool N o. 91 08 4-1 Fixed C lam p C able Tie U nrestricted W ires for Free-Floating C ontacts Ins. H eavy D uty M iniature W ire Size D ia. D im ension Part N os. Applicator for H and Range Range A F inish Strip F orm Loose Piece AM P-O -LECTRIC Tool AW G [m m 2 ] M achine* N o. P lating A 8 7 124-3 8 7 16 5-3 P lating C 5-8 7 124-2 5-8 7 16 5-2 *For use w ith A M P -O-L EC TR IC M odel “K ” m achines. C all the Technical S upport C enter (1-8 00-522 -6 7 52) for part nos. of applicators for use w ith the A M P -O-L EC TR IC M odel “G ” m achines (show n on page 27 0), as w ell as other bench m achines and fully autom atic A M P OM A TOR lead m aking m achines. N otes: 1. These contacts m ust be crim ped in accordance w ith TE S pecification N o. 1 1 4-2 5006 in order to function properly in a connector housing. 2. Extraction Tool N o. 91 08 4-1 is used for rem oving individual contacts from connector housings and for detaching contacts from m ating posts. S pring B ody A R elated Product D ata H ousings Used W ith — pages 2 0 8, 2 0 9 Application Tooling — page 2 72 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-360 2 8, 1 0 8-360 2 8-1 Application Specification 1 1 4 -2 50 0 6

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System W ire-Applied H ousings for Locking C lip C ontacts, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Locking C lip C ontacts and H ousings Single-R ow M aterial G lass-filled polyester, 94 V-0 rated R elated Product D ata C ontacts — page 2 0 7 M ateable H eaders and Posts — R efer to the M ating P ost S election G uide — page 90 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-360 2 8, 1 0 8-360 2 8-1 Application Specification 1 1 4 -2 50 0 6 .1 2 5 [3.1 8 ] centerline single-row , 2 and 3 position housings are available, Base Part N o. 1 04905. They are designed to be stackable end-to-end and side-by-side. Consult TE. Keying Plug Part N o. 8 71 79-1 (P lugs directly into housings for .025 [0.6 4] square post contacts) M aterial — Yellow, nylon A C Typ. B .08 5 [2.16 ] .1 00 [2.54] Typ. .1 75 [4.44] .700 [17 .7 8 ] .02 5 [0.6 4] S q. Post (S how n for R ef. only) .350 .2 73 8 .8 9 6 .93 .1 45 [3.6 8 ] .060 [1.52] (Post L ength) N o. of D im ensions H ousing Part N o. Pos. AB C U nstam ped Stam ped N ote: H ousing illustrated above is the “B oth Ends C losed” version.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System W ire-Applied H ousings for Locking C lip C ontacts, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Locking Clip Contacts and Housings D ouble-R ow M aterial G lass-filled polyester, 94 V-0 rated R elated Product D ata C ontacts — page 2 0 7 M ateable H eaders and Posts — R efer to the M ating P ost S election G uide — page 90 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-360 2 8, 1 0 8-360 2 8-1 Application Specification 1 1 4 -2 50 0 6 Keying Plug Part N o. 8 71 79-1 (P lugs directly into housings for .025 [0.6 4] square post contacts) M aterial — Yellow, nylon A B .350 [8 .8 9] (Post L ength) .1 00 [2.54] Typ. .700 [17 .7 8 ] .02 5 [0.6 4] S q. Post (S how n for R ef. only) .300 [7 .6 2] Both Ends Closed H ousing N o. of D im ensions H ousing Part N o. Configuration Pos. AB U nstam ped Stam ped 2 .1 1 6 [2.95] — 8 7 17 6 -2 — 4 .2 1 6 [5.49] .1 00 [2.54] 8 7 133-1 — 6 .31 6 [8 .03] .2 00 [5.08 ] 8 7 133-7 8 7 133-8 8 .41 6 [10.57 ] .300 [7 .6 2] 8 7 133-9 1-8 7 133-0 B oth Ends C losed 10 .51 6 [13.11] .400 [10.16 ] 8 7 133-2 8 7 133-5 12 .61 6 [15.6 5] .500 [12.7 0] 1-8 7 133-1 1-8 7 133-2 16 .8 1 6 [20.7 3] .700 [17 .7 8 ] 1-8 7 133-3 1-8 7 133-4 18 .91 6 [23.27 ] .8 00 [20.32] 1-8 7 133-5 1-8 7 133-6 20 1 .01 6 [25.8 1] .900 [22.8 6 ] 8 7 133-3 8 7 133-6 4 .2 1 6 [5.49] .1 00 [2.54] 8 7 132-1 — R ight End Open 10 .51 6 [13.11] .400 [10.16 ] 8 7 132-2 8 7 132-5 20 1 .01 6 [25.8 1] .900 [22.8 6 ] 8 7 132-3 8 7 132-6 4 .2 1 6 [5.49] .1 00 [2.54] 8 7 131-1 — L eft End Open 10 .51 6 [13.11] .400 [10.16 ] 8 7 131-2 8 7 131-5 20 1 .01 6 [25.8 1] .900 [22.8 6 ] 8 7 131-3 8 7 131-6 N ote: H ousing illustrated above is the “B oth Ends C losed” version. .2 70 [6 .8 6 ] M ax. .1 00 [2.54] .058 [1.47 ] Right End O pen Left End O pen Key Keyw ay

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV W ire-Applied C ontacts and H ousings N ote: A ll part num bers are R oH S com pliant. M od IV W ire-Applied C ontacts and H ousings Product Facts I Term inates 32 -2 0 AW G [0 .0 3-0 .6m m 2 ] discrete w ire I C ontacts have insulation support I C hoice of three contact m ating pressures I Available in a variety of gold and tin platings I R eceptacles m ate w ith .0 2 5 [0 .64] square or round posts I D ual cantilever contact beam w ith built-in anti-overstress feature for reliable m atings I H ousings accept a variety of receptacle and pin contacts I H ousing sizes range up to 10 0 positions I H ousing configurations include single- and double- row s on .10 0 [2 .54] centerlines I H ousing options include detent latching, polarization and bonded strain relief/ pull tabs I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 Perform ance C haracteristics C ontact C urrent R ating — 3 am peres Term ination R esistance — 1 2 m illiohm s (m ax.) — B eryllium copper contacts 2 0 m illiohm s (m ax.) — C opper-tin- phosphor bronze contacts D urability — R ef. P roduct S pecification 1 0 8-2 50 2 0 W ire-to-B oard 1 -8 7631 -5 D -R H ousing, Polarized w ith D etent 6-8 7756-6 S td. P ressure C ontacts 3-8 7977-5 D -R H ousing, Polarized 6-8 7756-6 S td. P ressure C ontacts 1 -8 7499-8 S -R H ousing, P lain 1 02 1 2 8 -1 H igh P ressure C ontacts 1 02 38 7-1 D -R Ejection H ousing, C enter Polarized 6-8 7756-6 S td. P ressure C ontacts 1 -8 7456-5 D -R H ousing , P lain 6-8 7756-6 S td. P ressure C ontacts 1 -8 7756-6 S td. P ressure P lain 6-8 7456-6 D -R H ousing, C ontacts 8 748 3-3 D -R H ousing w ith M ounting Ears 6-8 7756-6 S td. P ressure C ontacts 1 8 2 58 51 -1 L atch 1 02 2 41 -8 S -R H ousing Polarized w ith D etent 1 02 1 2 8 -1 H igh P ressure C ontacts 5-1 031 66-8 H dr 5-1 02 2 02 -7 H dr 51 02 1 54-1 H dr 1 -8 72 32 -0 H dr 5-1 031 66-8 H dr 1 031 68 -8 H dr R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV Pin and R eceptacle C ontacts N ote: A ll part num bers are R oH S com pliant. Mod IV Contacts Standard Pressure Configuration M aterial and Finish B eryllium copper, phosphor bronze, or copper-tin-phosphor bronze (see charts), plated as follow s: Plating A — Selectively plated .000030 [0.00076] gold on contact area, w ith gold flash over .000050 [0.001 2 7] nickel on entire contact Plating B — Selectively plated .00001 5 [0.00038] gold on contact area, w ith gold flash over .000050 [0.001 2 7] nickel on entire contact Plating C — .0001 00-.0002 00 [0.002 54 -0.00508] tin over .000030 [0.00076] nickel on entire contact R elated Product D ata H ousings Used W ith — pages 2 1 4 -2 2 0 Perform ance C haracteristics — page 2 1 0 Application Tooling — page 2 70-2 72 Technical D ocum ents — pages 2 76-2 78 Product Specification 1 08-2 5007, 1 08-2 501 9, 1 08-2 502 0, 1 08-2 502 1 Application Specification 1 1 4 -2 5003, 1 1 4 -2 501 6 Additional header sizes are available; m inim um order quantities m ay apply. Consult TE. C rim p Snap-In (N o-strip) R eceptacles and C rim p Snap-In Pins w ith Insulation Support (Standard Pressure) .068 [1.7 3] Ins. Part N os. H eavy D uty M iniature H and D ia. Applicator N o. Tool Range F inish Strip F orm Loose Piece for AM P-O -LECTRIC Part N o. M achine* .040-.055 [1.02-1.40] P lating A 8 7 107 -5 102348 -2 56 7 307 -2 9038 1-1 P lating C 8 7 107 -6 102348 -3 .058 [1.47 ] .01 6 [0.41] G ap M ax. .1 65 [4.19] .470 [11.94] .8 1 5 [20.7 0] N o-Strip Receptacle Pin w ith Insulation Support C rim p Snap-In (N o-strip) R eceptacles W ire Ins. Part N os. H eavy D uty M iniature H and Size D ia. Applicator N o. Tool Range (M ax.) F inish Strip F orm Loose Piece for AM P-O -LECTRIC Part N o. AW G [m m 2 ] M achine* Prem ium Com m ercial .061 P lating A 102095-3 102107 -2 26 -22 0.12-0.4 [1.55] P lating B 102095-2 102107 -1 46 6 8 12-2 91517 -1 58 6 41-1 † P lating C 5-102095-4 5- 102107 -3 *For use w ith A M P -O-L EC TR IC M odel “K ” m achines. C all the Technical S upport C enter (1-8 00-522 -6 7 52) for part nos. of applicators for use w ith the A M P -O-L EC TR IC M odel “G ” m achines (show n on page 27 0), as w ell as other bench m achines and fully autom atic A M P OM A TOR lead m aking m achines. †P R O-C R IM P ER II hand tool fram e w ith die set assem bly. D ie S et Part N o. 58 6 41-2 C rim p Snap-In Pins w ith Insulation Support

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV R eceptacle C ontacts M od IV C ontacts C rim p Snap-In R eceptacles w ith Insulation Support (Standard, Interm ediate and H igh Pressure) M aterial and Finish B eryllium copper, phosphor bronze or copper-tin-phosphor bronze (see charts, on follow ing page), plated as follow s: Plating A — D uplex plated .000030 [0.00076] gold on contact area, .0001 00- .0002 00 [0.002 54 -0.00508] tin on crim p area, w ith entire contact underplated .000050 [0.001 2 7] nickel Plating B — D uplex plated .00001 5 [0.00038] gold on contact area, .0001 00- .0002 00 [0.002 54 -0.00508] tin on crim p area, w ith entire contact underplated .000050 [0.001 2 7] nickel Plating D — Selectively plated .000050 [0.001 2 7] gold on contact area, w ith gold flash over .000050 [0.001 2 7] nickel on entire contact Plating E — Selectively plated .000030 [0.00076] gold on contact area, w ith gold flash over .000050 [0.001 2 7] nickel on entire contact Plating F — Selectively plated .00001 5 [0.00038] gold on contact area, w ith gold flash over .000050 [0.001 2 7] nickel on entire contact Plating G — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000030 [0.0 0 0 76] nickel on entire contact R elated Product D ata H ousings Used W ith — pages 2 1 4 -2 2 0 Perform ance C haracteristics — page 2 1 0 Application Tooling — pages 2 70 -2 72 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 5007, 1 08-2 501 9, 1 08-2 502 0, 1 08-2 502 1 Application Specification 1 1 4 -2 5003, 1 1 4 -2 501 6 .058 [1.47 ] .068 [1.7 3] .1 65 [4.19] Standard Pressure Interm ediate Pressure H igh Pressure A A A A M ating F orce U nm ating F orce A-G ap D im ension

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV R eceptacle C ontacts (Continued) N ote: A ll part num bers are R oH S com pliant. Mod IV Contacts W ire Ins. Part N os. H eavy D uty M iniature Applicator for H and Size D ia. D im ension M aterial F inish Applicator for Stripper/ Tool Range (M ax.) A AM P-O -LECTRIC Crim per Part N os. AW G [m m 2 ] Strip F orm Loose Piece M achine* M achine Prem ium Com m ercial C u-S n-P h B z P lating A 5-102316 -8 6 -102316 -4 C u-S n-P h B z P lating B 5- 102316 -6 6 -102316 -3 B e C u P lating F 102917 -5 102917 -6 C u-S n-P h B z P lating G 102316 -5 1-102316 -2 C u-S n-P h B z P lating A 6 -8 7 7 56 -7 6 -8 7 7 56 -8 C u-S n-P h B z P lating B 6 -8 7 7 56 -2 6 -8 7 7 56 -6 C u-S n-P h B r P lating G 8 7 7 56 -6 8 7 7 56 -7 26 -22 0.12-0.4 B e C u P lating D 1-8 7 6 6 6 -6 8 7 6 6 7 -5 46 6 57 1-2 46 6 918 -1 91517 -1 58 6 41-1 † B e C u P lating E 8 7 6 6 6 -2 8 7 6 6 7 -2 B e C u P lating F 8 7 6 6 6 -5 8 7 6 6 7 -5 B e C u P lating G 8 7 6 6 6 -3 8 7 6 6 7 -3 C u-S n-P h B z P lating A 6 -8 7 523-8 6 -8 7 523-9 C u-S n-P h B z P lating B 2-8 7 523-3 2-8 7 523-4 C u-S n-P h B r P lating G 8 7 523-5 8 7 523-6 B e C u P lating G 8 596 9-9 8 6 016 -3 Standard Pressure (M od IV) W ire Ins. Part N os. H eavy D uty M iniature Applicator for H and Size D ia. D im ension M aterial F inish Applicator for Stripper/ Tool Range (M ax.) A AM P-O -LECTRIC Crim per Part N os. AW G [m m 2 ] Strip F orm Loose Piece M achine* M achine Prem ium Com m ercial C u-S n-P h B z P lating A 5- 10317 1-4 5- 10317 1-5 B e C u P lating E 102548 -5 102548 -6 B e C u P lating F 102548 -1 102548 -3 C u-S n-P h B z P lating A 2-8 7 195-3 2-8 7 195-6 C u-S n-P h B z P lating B 2-8 7 195-4 2-8 7 195-5 24-20 0.2-0.6 B e C u P lating E 8 6 492-6 8 7 046 -3 46 6 56 2-2 46 6 905-1 91516 -1 — B e C u P lating F 8 6 492-2 8 7 046 -1 B e C u P lating G 8 6 492-9 8 7 046 -4 Interm ediate Pressure (M od IV.v) W ire Ins. Part N os. H eavy D uty M iniature Applicator for H and Size D ia . D im ension M aterial F inish Applicator for AM P-O -M ATIC Tool Range (M ax.) A AM P-O -LECTRIC Stripper/Crim per Part N os. AW G [m m 2 ] Strip F orm Loose Piece M achine* M achine For use w ith A M P -O-L EC TR IC M odel “K ” m achines. C all the Technical S upport C enter (1-8 00-522 -6 7 52) for part nos. of applicators for use w ith the A M P -O-L EC TR IC M odel “G ” m achines (show n on page 27 0), as w ell as other bench m achines and fully autom atic A M P OM A TOR lead m aking m achines. C ontact m aterial is phosphor bronze. †P R O-C R IM P ER II hand tool fram e w ith die set assem bly. D ie S et Part N o. 58 6 41-2 H igh Pressure (M od V)**

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV W ire-Applied H ousings, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. M od IV W ire-Applied H ousings N on-Polarized M aterial B lack therm oplastic, flam e retardant R elated Product D ata C ontacts — pages 2 1 1 -2 1 3 M ateable H eaders and Posts — pages 93-95, 1 0 1 -1 0 3 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 5007, 1 08-2 501 9, 1 08-2 502 0, 1 08-2 502 1 Application Specification 1 1 4 -2 5003, 1 1 4 -2 501 6 .600 [15.24] .1 75 [4.45] ±.003 [±0.08 ] B .1 40 [3.56 ] .1 00 [2.54] ±.003 [±0.08 ] C X X A M ax. .072 [1.8 3] Typ. N o. of D im ensions Part N o. Pos. AB C Stam ped* U nstam ped 2 .2 05 [5.21] .1 00 [2.54] — 8 7 499-3 8 7 499-4 C avity identification, part num ber and date code stam ped on housing w here size perm its. **N o m arking on housing. N otes: 1. S train reliefs are available and m ay be purchased separately. C onsult TE. N otes: 2. C ontact Extraction/Lance Reset Tool N o. 8 43996-3. Part N o. 8 62 8 6-1 (P lugs into standard or interm ediate pressure receptacle contact) M aterial — Natural color nylon Keying Plugs Part N o. 8 7077-2 (P lugs directly into housing) Section X-X .050 [1.27 ] Typ. .070 [1.7 8 ] Typ.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV W ire-Applied H ousings, Single-R ow , .10 0 [2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Mod IV Wire-Applied Housings Polarized (w ith D etent Latching) A .056 [1.42] .050 [1.27 ] .071 [1.8 0] .1 8 2 [4.6 2] .1 00 [2.54] Typ. .1 2 7 [3.23] Part N o. 8 62 8 6-1 (P lugs into standard or interm ediate pressure receptacle contact) M aterial — Natural color nylon Keying Plugs Part N o. 8 7077-2 (P lugs directly into housing) R ecessed A rea .1 75 [4.45] ±.003 [±0.08 ] B ±.003 [±0.08 ] C X X .072 [1.8 3] .600 [15.24] .1 00 [2.54] Typ. Typ. N o. of D im ensions Part N os. Pos. ABC U nstam ped* *N o m arking on housing. N ote: C ontact Extraction/Lance Reset Tool N o. 8 43996-3. M aterial B lack therm oplastic, flam e retardant R elated Product D ata C ontacts — pages 2 1 1 -2 1 3 M ateable H eaders and Posts — pages 1 1 5, 1 1 6 Flexible Film C onnectors, Single-R ow Pin Assem blies — C atalog 82 007 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 5007, 1 08-2 501 9, 1 08-2 502 0, 1 08-2 502 1 Application Specification 1 1 4 -2 5003, 1 1 4 -2 501 6 Section X-X

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV W ire-Applied H ousings, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. M od IV W ire-Applied H ousings N o. Part N os. of D im ensions C = .600 [1 5.2 4] C = .645 [1 6.38 ] Pos. AB Stam ped* U nstam ped U nstam ped 4 .2 00 [5.08 ] .1 00 [2.54] 5-8 7 456 -0 4-8 7 456 -9 2-8 6 17 7 -5 6 .300 [7 .6 2] .2 00 [5.08 ] 8 7 456 -2 8 7 456 -1 1-8 6 17 7 -8 8 .400 [10.16 ] .300 [7 .6 2] 8 7 456 -4 8 7 456 -3 2-8 6 17 7 -0 10 .500 [12.7 0] .400 [10.16 ] 8 7 456 -6 8 7 456 -5 1-8 6 17 7 -2 12 .600 [15.24] .500 [12.7 0] 8 7 456 -8 8 7 456 -7 1-8 6 17 7 -3 14 .700 [17 .7 8 ] .600 [15.24] 1-8 7 456 -0 8 7 456 -9 1-8 6 17 7 -4 16 .8 00 [20.32] .700 [17 .7 8 ] 1-8 7 456 -2 1-8 7 456 -1 1-8 6 17 7 -5 18 .900 [22.8 6 ] .8 00 [20.32] 1-8 7 456 -4 1-8 7 456 -3 1-8 6 17 7 -6 20 1 .000 [25.40] .900 [22.8 6 ] 1-8 7 456 -6 1-8 7 456 -5 8 6 17 7 -1 22 1 .1 00 [27 .94] 1 .000 [25.40] — 1-8 7 456 -7 8 6 17 7 -2 24 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 2-8 7 456 -0 1-8 7 456 -9 8 6 17 7 -3 26 1 .300 [33.02] 1 .2 00 [30.48 ] 2-8 7 456 -2 2-8 7 456 -1 8 6 17 7 -4 28 1 .400 [35.56 ] 1 .300 [33.02] 2-8 7 456 -4 2-8 7 456 -3 8 6 17 7 -5 30 1 .500 [38 .10] 1 .400 [35.56 ] 2-8 7 456 -6 2-8 7 456 -5 8 6 17 7 -6 32 1 .600 [40.6 4] 1 .500 [38 .10] 2-8 7 456 -8 2-8 7 456 -7 8 6 17 7 -7 34 1 .700 [43.18 ] 1 .600 [40.6 4] 3-8 7 456 -0 2-8 7 456 -9 8 6 17 7 -8 36 1 .8 00 [45.7 2] 1 .700 [43.18 ] 3-8 7 456 -2 3-8 7 456 -1 8 6 17 7 -9 38 1 .900 [48 .26 ] 1 .8 00 [45.7 2] — 3-8 7 456 -3 1-8 6 17 7 -0 40 2 .000 [50.8 0] 1 .900 [48 .26 ] 3-8 7 456 -6 3-8 7 456 -5 1-8 6 17 7 -1 42 2 .1 00 [53.34] 2 .000 [50.8 0] 4-8 7 456 -4 4-8 7 456 -3 — 44 2 .2 00 [55.8 8 ] 2 .1 00 [53.34] 3-8 7 456 -8 3-8 7 456 -7 1-8 6 17 7 -7 48 2 .400 [6 0.96 ] 2 .300 [58 .42] 6 -8 7 456 -0 5-8 7 456 -9 2-8 6 17 7 -3 50 2 .500 [6 3.50] 2 .400 [6 0.96 ] 4-8 7 456 -0 3-8 7 456 -9 2-8 6 17 7 -1 52 2 .600 [6 6 .04] 2 .500 [6 3.50] 4-8 7 456 -2 4-8 7 456 -1 1-8 6 17 7 -9 54 2 .700 [6 8 .58 ] 2 .600 [6 6 .04] — 4-8 7 456 -5 — 56 2 .8 00 [7 1.12] 2 .700 [6 8 .58 ] — 6 -8 7 456 -1 — 58 2 .900 [7 3.6 6 ] 2 .8 00 [7 1.12] — 6 -8 7 456 -3 — 6 0 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 5-8 7 456 -2 5-8 7 456 -1 — 6 4 3.2 00 [8 1.28 ] 3.1 00 [7 8 .7 4] 6 -8 7 456 -6 6 -8 7 456 -5 — 6 6 3.300 [8 3.8 2] 3.2 00 [8 1.28 ] 5-8 7 456 -4 5-8 7 456 -7 — 7 0 3.500 [8 8 .90] 3.400 [8 6 .36 ] — 5-8 7 456 -5 2-8 6 17 7 -4 7 2 3.600 [91.44] 3.500 [8 8 .90] 4-8 7 456 -8 4-8 7 456 -7 — C avity identification, part num ber and date code stam ped on housing w here size perm its. N o m arking on housing. N otes: 1. S train reliefs are available and m ay be purchased separately. C onsult TE. N otes: 2. C ontact Extraction/Lance Reset Tool N o. 8 43996-3. B N on-Polarized .1 00 [2.54] X .1 00 [2.54] Typ. .1 75 [4.45] A .2 40 [6 .10] .070 [1.7 8 ] .050 [1.27 ] Typ. .072 [1.8 3] Part N o. 8 62 8 6-1 (P lugs into standard or interm ediate pressure receptacle contact) M aterial — Natural color nylon Keying Plugs Part N o. 8 7077-1 (for .6 45 high housings) Part N o. 8 7077-2 (for .6 00 high housings) (P lugs directly into housing) M aterial B lack therm oplastic, flam e retardant R elated Product D ata C ontacts — pages 2 1 1 -2 1 3 M ateable H eaders and Posts — pages 96-99, 1 04 , 1 05, 1 1 7-1 2 0 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 5007, 1 08-2 501 9, 1 08-2 502 0, 1 08-2 502 1 Application Specification 1 1 4 -2 5003, 1 1 4 -2 501 6 Section X-X X C R Optional

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od IV W ire-Applied H ousings, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Mod IV Wire-Applied Housings N o. of D im ensions Part N os. Pos. ABC Stam ped* U nstam ped C avity identification, part num ber and date code stam ped on housing w here size perm its. **N o m arking on housing or strain relief. N otes: 1. S train reliefs are available and m ay be purchased separately. C onsult TE. N otes: 2. C ontact Extraction/Lance Reset Tool N o. 8 43996-3. A Polarized .1 75 [4.45] .600 [15.24] .2 40 [6 .10] M aterial B lack therm oplastic, flam e retardant R elated Product D ata C ontacts — pages 2 1 1 -2 1 3 M ateable H eaders and Posts — pages 1 1 7-1 31 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 5007, 1 08-2 501 9, 1 08-2 502 0, 1 08-2 502 1 Application Specification 1 1 4 -2 5003, 1 1 4 -2 501 6 Part N o. 8 62 8 6-1 (P lugs into standard or interm ediate pressure receptacle contact) M aterial — Natural color nylon Keying Plugs Part N o. 8 7077-2 (P lugs directly into housing) S train R elief L ocators (on H ousings 20 Positions and L arger) .1 00 [2.54] .070 [1.7 8 ] .1 00 [2.54] Typ. ±.003 [±0.08 ] B ±.003 [±0.08 ] C X X .1 00 [2.54] Typ. Typ. Section X-X R Optional .050 [1.27 ] Typ.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. M od IV W ire-Applied H ousings M od IV W ire-Applied H ousings, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) Polarized (w ith D etent Latching, w ith and w ithout Strain R elief/Pull Tab) .1 00 [2.54] X .1 00 [2.54] Typ. .1 75 [4.45] A .2 40 [6 .10] .070 [1.7 8 ] Typ. .050 [1.27 ] Typ. Part N o. 8 62 8 6-1 (P lugs into standard or interm ediate pressure receptacle contact) M aterial — Natural color nylon Keying Plugs Part N o. 8 7077-2 (P lugs directly into housing) M aterial B lack therm oplastic, flam e retardant R elated Product D ata C ontacts — pages 2 1 1 -2 1 3 M ateable H eaders and Posts — pages 1 1 7-1 2 5, 1 2 7-1 33 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 5007, 1 08-2 501 9, 1 08-2 502 0, 1 08-2 502 1 Application Specification 1 1 4 -2 5003, 1 1 4 -2 501 6 Section X-X X .600 [15.24] R Optional .1 00 [2.54] Typ. ±.003 [±0.08 ] B ±.003 [±0.08 ] C .095 [2.41] D ia. .500 [12.7 0] 1 .1 50 [29.21] .095 [2.41] D ia. 1 .000 [25.40] 1 .900 [48 .26 ] S train R elief L ocators (on H ousings 20 Positions and L arger) H ousing w ith Strain Relief/Pull Tab Strain Relief Part N o. 8 792 1 -1 (10 thru 18 positions) H ousing w ith Strain Relief/Pull Tab Strain Relief Part N o. 8 771 0-1 (20 positions and larger) Part N os. N o. of D im ensions N o. of W ithout Strain Relief W ith Strain Relief Pos. ABC D etents Stam ped* U nstam ped** Stam ped* C avity identification, part num ber and date code stam ped on housing and/or strain relief w here size perm its. N o m arking on housing or strain relief. N otes: 1. The S train R elief/P ull Tab can be bonded to any therm oplastic connector housing. N otes: 2. S train reliefs m ay be purchased separately. N otes: 3. C ontact Extraction/Lance Reset Tool N o. 8 43996-3.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Mod IV Wire-Applied Housings M od IV W ire-Applied H ousings, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) Part N os. N o. of D im ensions N o. of W ithout Strain Relief W ith Strain Relief Pos. A BC D etents Stam ped* U nstam ped** Stam ped* C avity identification, part num ber and date code stam ped on housing and/or strain relief w here size perm its. N o m arking on housing or strain relief. N otes: 1. The S train R elief/P ull Tab can be bonded to any therm oplastic connector housing. N otes: 2. S train reliefs m ay be purchased separately. N otes: 3. C ontact Extraction/Lance Reset Tool N o. 8 43996-3.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. M od IV W ire-Applied H ousings M od IV W ire-Applied H ousings, D ouble-R ow , .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) C enter Polarized M aterial B lack therm oplastic, flam e retardant R elated Product D ata C ontacts — pages 2 1 1 -2 1 3 M ateable H eaders and Posts — AM P-LATC H Low Profile H eaders, Shrouded — pages 1 35-1 4 0 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 5007, 1 08-2 501 9, 1 08-2 502 0, 1 08-2 502 1 Application Specification 1 1 4 -2 5003, 1 1 4 -2 501 6 Part N o. 8 62 8 6-1 (P lugs into standard or interm ediate pressure receptacle contact) M aterial — Natural color nylon Keying Plugs Part N o. 8 7077-2 (P lugs directly into housing) Position N o. 1 Indicator ROptional Section X-X .030 [0.7 6 ] .1 30 [3.30] .2 8 5 [7 .24] .072 [1.8 3] .600 [15.24] .1 2 0 [3.05] .1 00 [2.54] .2 2 7 [5.7 7 ] .1 30 [3.30] B A C X X N o. of D im ensions Part N os. Pos. ABC (Stam ped*) *C avity identification and TE stam ped on housing. †N on-functional slot is used for gating purposes during injection m olding process. This gating feature is not inherent in all production m olds. Therefore, the depicted slot w ill only be present on housings produced on m old tooling requiring this gating feature. N ote: C ontact Extraction/Lance Reset Tool N o. 8 43996-3. .570 [14.8 8 ] .1 50† [3.8 1]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Short Point, C rim p Snap-In W ire-Applied C ontacts and H ousings N ote: A ll part num bers are R oH S com pliant. Short Point, Crimp Snap-In Wire- Applied Contacts and Housings W ire-to-B oard 1 0368 8 -9 M TE R ecept. H ousing 1 -1 04479-1 S hort Point C ontact 1 042 57-5 M TE R ecept. H ousing 1 -1 0448 0-5 S hort Point C ontact 1 0448 2 -9 S hort Point R ecept. H ousing 5-1 0448 1 -6 S hort Point C ontact 1 042 57-3 M TE R ecept. H ousing 1 -1 0448 0-4 S hort Point C ontact 5-1 04450-3 M TE H dr 1 -8 72 32 -0 H dr Product Facts I Short point of contact m ates w ith .169 [4.2 9] to .2 59 [6.58] long post I D ouble-row housings are end-to-end and side-to-side stackable I Term inates 32 -2 0 AW G [0 .0 3-0 .6 m m 2 ] discrete w ire I C ontacts have insulation support to accept a m axim um insulation diam eter of .0 60 [1.52 ] I Available w ith .0 0 0 0 15 [0 .0 0 0 38] or .0 0 0 0 30 [0 .0 0 0 76] gold duplex, or tin plating I M ates w ith .0 2 5 [0 .64] square posts I D ual cantilever contact beam s for reliable m atings I Locking retention latch provides approxim ately 3 lb [13.34 N ] of retention force I Unique locking latch design helps prevent latch from protruding through latch w indow I C ontacts snap into AM PM OD U M TE single-row housings I D ouble-row housing configurations include .10 0 [2 .54] centerline, plain and polarized I H ousing sizes range from 4 to 52 positions I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 I Produced under a Q uality M anagem ent System certified to ISO 90 0 1 A copy of the certificate is available upon request A M PM O D U Short Point receptacle contacts are designed to m ate w ith .0 25 [0 .64] square posts. They w ill m ate w ith posts as short as .1 69 [4.29]. Short Point double-row housings are end-to-end and side-to-side stackable on .1 0 0 [2.54] centers. C ontacts also can be used in single-row A M PM O D U M TE housings to provide a com plete w ire-crim p system , or to serve as replacem ent contacts. Perform ance C haracteristics C ontact C urrent R ating — 3 am peres Term ination R esistance — 1 2 m illiohm s (m ax.) D urability — R ef. P roduct S pecification 1 0 8-1 4 72 R R ISO Certified9001

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Short Point C rim p Snap-In R eceptacle C ontacts N ote: A ll part num bers are R oH S com pliant. Short Point C ontacts .068 [1.7 3] C C .060 [1.52] .460 [11.6 8 ] Section C - C .01 2 [0.30] G ap Q uick-Change W ire Size Applicator for Applicator for Range Ins. F inish Contact Part N o. AM P-O -M ATIC H and AW G [m m 2 ] D ia. (Standard Pressure) AM P-O -LECTRIC Stripper/Crim per Tool Range Strip F orm Loose Piece M achine* M achine N os. P lating A 1-10448 1-1 1-10448 1-3 P lating C 5- 10448 1-2 5- 10448 1-6 . P lating A 1- 10448 0-3 1- 10448 0-6 P lating C 1- 10448 0-7 1- 10448 0-4 . P lating A 1- 10447 9-0 1- 10447 9-3 P lating C 10447 9-8 1- 10447 9-1 *For use w ith M odel “K ” m achines. C all the Tooling/Technical A ssistance C enter (1-8 00-7 22 -111 1) for part nos. of applicators for use w ith the M odel “G ” m achines (show n on page 28 8 ), as w ell as other bench m achines and fully autom atic A M P OM A TOR lead m aking m achines. K eying Plug Part N o. 1 04072 -1 Ten plugs are supplied per strip. Order quantity reflects the num ber of strips required. Extraction/Lance Reset Tool N o. 8 43477-1 M aterial and Finish C opper alloy C 70 2 5, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] m in. gold on contact area, .00 0 0 50 [0 .0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .00 0 0 50 [0 .0 0 1 2 7] m in. nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] m in. gold on contact area, .00 0 0 50 [0 .0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .00 0 0 50 [0 .0 0 1 2 7] m in. nickel Plating C — .0 0 0 1 0 0 [0.002 54 ] m in. tin over .0 0 0 0 50 [0 .0 0 1 2 7] m in. nickel on entire contact R elated Product D ata Perform ance C haracteristics — page 2 2 1 H ousings used in — S hort P oint— pages 2 2 3, 2 2 4 AM PM OD U M TE Unloaded H ousings — pages 2 2 8-2 33 Application Tooling — page 2 70 -2 72 Technical D ocum ents — pages 2 76-2 78 Product Specification 1 08-1 4 72 Application Specification 1 1 4 -2 50 38

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Short Point W ire-Applied H ousings, D ouble-R ow , N on-Polarized, .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Short Point Wire-Applied Housings N o. of D im ensions H ousing Pos. AB Part N o. 4 .1 98 [5.03] .1 00 [2.54] 10448 2-1 6 .2 98 [7 .57 ] .2 00 [5.08 ] 10448 2-2 8 .398 [10.11] .300 [7 .6 2] 10448 2-3 10 .498 [12.6 5] .400 [10.16 ] 10448 2-4 12 .598 [15.19] .500 [12.7 0] 10448 2-5 14 .698 [17 .7 3] .600 [15.24] 10448 2-6 16 .798 [20.27 ] .700 [17 .7 8 ] 10448 2-7 18 .8 98 [22.8 1] .8 00 [20.32] 10448 2-8 20 .998 [25.35] .900 [22.8 6 ] 10448 2-9 22 1 .098 [27 .8 9] 1 .000 [25.40] 1-10448 2-0 26 1 .2 98 [32.97 ] 1 .2 00 [30.48 ] 1-10448 2-1 28 1 .398 [35.51] 1 .300 [33.02] 1-10448 2-2 30 1 .498 [38 .05] 1 .400 [35.56 ] 1-10448 2-3 32 1 .598 [40.59] 1 .500 [38 .10] 1-10448 2-4 34 1 .698 [43.13] 1 .600 [40.6 4] 1-10448 2-5 36 1 .798 [45.6 7 ] 1 .700 [43.18 ] 1-10448 2-6 38 1 .8 98 [48 .21] 1 .8 00 [45.7 2] 1-10448 2-7 40 1 .998 [50.7 5] 1 .900 [48 .26 ] 1-10448 2-8 44 2 .1 98 [55.8 3] 2 .1 00 [53.34] 1-10448 2-9 52 2 .598 [6 5.99] 2 .500 [6 3.50] 2-10448 2-0 M aterial B lack therm oplastic, flam e retardant, Perform ance C haracteristics — page 2 2 1 C ontacts — page 2 2 2 M ateable H eaders — pages 1 0 4 , 1 0 5 Technical D ocum ents — pages 2 76-2 78 Product Specification 1 08-1 4 72 Application Specification 1 1 4 -2 50 38 B X X Section X-X A .049 [1.24] .1 00 Typ. [2.54] .1 98 [5.03] .036 [0.91] 0.72 [1.8 3] .600 [15.24] .1 00 [2.54]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Short Point W ire-Applied H ousings, D ouble-R ow , Polarized, .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. Short Point W ire-Applied H ousings M aterial B lack therm oplastic, flam e retardant, Perform ance C haracteristics — page 2 2 1 C ontacts — page 2 2 2 M ateable H eaders — pages 1 0 4 , 1 0 5, 1 35-1 38 Technical D ocum ents — pages 2 76-2 78 Product Specification 1 08-1 4 72 Application Specification 1 1 4 -2 50 38 B A X X .049 [1.24] .1 00 Typ. [2.54] .1 98 [5.03] .1 00 [2.54] .1 00 [2.54] .095 [2.41] .1 00 [2.54] Section X-X .036 [0.91] 0.72 [1.8 3] .600 [15.24] N o.of D im ensions H ousing Pos. AB Part N o. 8 .398 [10.11] .300 [7 .6 2] 10448 3-1 10 .498 [12.6 5] .400 [10.16 ] 1-10448 3-1 12 .598 [15.19] .500 [12.7 0] 1-10448 3-2 14 .698 [17 .7 3] .600 [15.24] 10448 3-9 18 .8 98 [22.8 1] .8 00 [20.32] 10448 3-2 20 .998 [25.35] .900 [22.8 6 ] 10448 3-3 26 1 .2 98 [32.97 ] 1 .2 00 [30.48 ] 10448 3-4 30 1 .498 [38 .05] 1 .400 [35.56 ] 10448 3-5 38 1 .8 98 [48 .21] 1 .8 00 [45.7 2] 10448 3-6 50 2 .498 [6 3.45] 2 .400 [6 0.96 ] 1-10448 3-3 52 2 .598 [6 5.99] 2 .500 [6 3.50] 1-10448 3-0 54 2 .698 [6 8 .53] 2 .600 [6 6 .04] 10448 3-7 6 4 3.1 98 [8 1.23] 3.1 00 [7 8 .7 4] 10448 3-8 N ote: Other sizes can be m ade available on request.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE Interconnection System MTE Interconnection System Perform ance Specifications E lectrical C haracteristics C ontact C urrent R ating — 3 am peres for single contact in free air (A m perage could vary due to am bient tem perature, w ire size and duty cycles.) C ontact Term ination R esistance — 1 5 m illiohm s (m ax.) D ielectric W ithstanding Voltage — A t S ea L evel–60 0 VA C , rm s A t 70 ,0 0 0 Ft. [2 1 336 m ]–2 2 5 VA C , rm s Insulation R esistance — 5,0 0 0 m egohm s (m in.) E nvironm ental C haracteristics Operating Tem perature — -65°C to + 1 0 5°C Vibration — 1 5 G ’s (gold), 1 0 G ’s (tin) Physical Shock — 50 G ’s Industrial M ixed Flow Gasing — C lass 1 (2 0 days) (gold) Product Specification 1 0 8-2 50 34 Application Specification 1 1 4 -2 50 2 6 Product Facts I R eceptacle assem blies m ate w ith .0 2 5 [0 .64] sq. posts; m ating post length is .2 0 0 I Proven AM PM OD U receptacle contact design; dual cantilever beam s, built-in anti-overstress, com pletely enclosed “box” design, standard or high-pressure I Insulation displacem ent technology I Tw o contact sizes for term inating 30 -2 2 AW G [0 .0 5- 0 .3 m m 2 ] w ire range; .0 54 [1.37] m ax. insulation diam - eter w ith an insulation w all thickness of .0 15 [0 .38] m ax. I C hoice of gold duplex or tin plated contacts I Interchangeable crim p snap-in pin and receptacle contacts available I H ousing sizes 2 through 2 5 positions, single-row .10 0 [2 .54] centers I Plain housings are end-to-end and/or back-to-back stackable for open pin field applications I Optional header w ith “sw aged tail” feature helps prevent m ovem ent prior to flow soldering I Integral latch provides positive retention betw een header and receptacle housing I C oupling shrouds perm it ganging of sm aller connectors w ith guide ribs to form larger single- or double-row latching connectors I M ass term inating tooling provides low est applied cost for m ost production needs I SM T and SM T com patible, high-tem p headers available I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 The A M PM O D U M TE Interconnection System offers both w ire-to-board and w ire-to-w ire connectors using .0 25 [0 .64] sq. post technology. The A M PM O D U M TE Interconnection System consists of single-row housings w ith contacts preloaded on .1 0 0 [2.54] centers. Housings are furnished w ith contacts partially inserted, leaving the term ination areas exposed. F inal contact insertion can be accom plished autom atically w ith TE application equipm ent, and m anually w hen term inated w ith the TE pistol grip hand tool. The heart of the system is the insulation displacem ent contact design, featured in both pin and receptacle contacts. The receptacle contact, available in either standard or high-pressure, features dual cantilever beam s in an enclosed “box.” The post stop helps prevent a m ating post from disturbing the w ire term ination and also lim its the m ating depth of a long post to protect a w rap-type term ination at the base of the post. The forw ard contact stop helps prevent contact overinsertion prior to term ination. A ll contacts are furnished on carrier strips w hich are interlocked for stability and positive location during term ination. Single-row housings are available in sizes 2 through 25 positions. Included are three styles of receptacle housings— plain, polarized/ latching and ribbed and tw o styles of pin housings, shrouded w ith polarizing/ latching feature and ribbed. R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE Interconnection System (Continued) M TE Interconnection System R eceptacle A ssem blies w ith G uide R ibs (S ee pages 232 & 233) R eceptacle A ssem blies Polarized/L atching (S ee pages 230 & 231) D ouble-R ow C oupling S hroud (S ee page 241) A M P M OD U S hrouded H eaders, D ouble-R ow, S traight or R ight A ngle Post 1 (S ee pages 119-121, 124, 125, 127 , 128 , 131-133 & 149) R eceptacle A ssem blies w ith G uide R ibs (S ee pages 232 & 233) R eceptacle C ontact, Insulation D isplacem ent (U sed in all R eceptacle A ssem blies) A M P M OD U B reakaw ay H eaders, S ingle- or D ouble-R ow, S traight or R ight–A ngle Post, w ith or w ithout B oard R etention Feature (S ee pages 102-105) R eceptacle A ssem blies P lain (S ee pages 228 and 229) H igh P ressure R eceptacle A ssem blies, P lain (S ee page 234) R eceptacle A ssem blies, Polarized/L atching (S ee pages 230 & 231) H igh-Tem p H eaders, Polarized/L atching, S traight and R ight A ngle Post, w ith or w ithout H olddow n (S ee pages 249 & 250) H eaders, Polarized/L atching, S traight Post, w ith or w ithout S w aged Tail (S ee pages 244 & 245) H eaders, Polarized/L atching, R ight A ngle Post, w ith or w ithout H olddow n (S ee pages 246 & 247 ) 1M ating A M P M OD U D ouble-R ow S hrouded H eader A ssem blies m ust have .318 [8 .08 ] m ating post length and .150 [3.8 1] dim ension from centerline of last 1post to inside of end shroud w all. 2S urface M ount R ight-A ngle and V ertical H eaders are also available (see pages 251 and 252) W ire-to-B oard S ingle-R ow C oupling S hroud (S ee page 240)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE Interconnection System (Continued) MTE Interconnection System R eceptacle C ontact, Insulation D isplacem ent (U sed in all R eceptacle A ssem blies) C rim p S nap-In R eceptacle C ontact (U sed w ith U nloaded H ousings— S ee page 253) C rim p S nap-In P in C ontact (U sed w ith U nloaded H ousings— S ee page 254) P in C ontact, Insulation D isplacem ent (U sed in all P in A ssem blies) P in A ssem blies, S hrouded Polarized/L atching (S ee pages 236 & 237 ) R eceptacle A ssem blies, Polarized/L atching (S ee pages 230 & 231) R eceptacle A ssem blies w ith G uide R ibs (S ee pages 232 & 233) S ingle-R ow C oupling S hroud (S ee page 240) Panel M ount P in S hroud (S ee page 242) P in A ssem blies w ith G uide R ibs (S ee pages 238 & 239) N ote: For w ire-to-w ire applications show n above, all pin and receptacle assem bly com binations are interm ateable. W ire-to-W ire

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE R eceptacle Assem blies— Plain, Single-R ow , .10 0 [2 .54] C enterline M TE R eceptacle Assem blies Preassem bled housings in strip form are available in positions 2 thru 1 2 . F or ease of handling, positions 2 thru 5 are recom - m ended w hen using the TE M anual Pistol G rip Tool. M aterial and Finish H ousing — B lack therm oplastic, C ontacts — P hosphor B ronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .000050 [0.0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .000050 [0.0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 0 0 [0.002 54 ] tin over .0 0 0 0 50 [0 .0 0 1 2 7] nickel on entire contact N ote: Insulation displacem ent contacts accept an insulation diam eter of .030 [0.76] m in. to .0 54 [1 .37] m ax. w ith an insula - tion w all thickness of .0 1 5 [0.38] m ax. M ating post length for preloaded housings R elated Product D ata M ateable AM PM OD U Products B reakaw ay H eaders — pages 1 02 - 1 1 0 (w ith .2 30 m ating length) R eeled B reakaw ay H eaders — pages 1 0 6, 1 0 7 (w ith .2 30 m ating length) M achine Applied B andolier Posts — page 1 63 Single-R ow Shrouded H eaders w ith .0 66 [1.68] E nd D im ension — pages 1 1 5, 1 1 6 Interchangeable C rim p C ontacts (Short P oint) — page 2 53 Application Tooling — page 2 73 Perform ance Specifications — page 2 2 5 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 R eceptacle C ontacts (S ee N ote 1) Position N o. 1 Indicator (Farside) 1 .1 2 0 [28 .45] .600 [15.24] .098 [2.49] .1 00 [2.54] Typ. B Typ. A .52 0 [13.21] These receptacle assem blies w ith plain housings can be stacked end-to-end and/or side- to-side for single or double-row connections to an open pin field w ith a .1 00 [2 .54] centerline grid.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE R eceptacle Assem blies— Strip Form Plain, Single-R ow , .10 0 [2 .54] C enterline (Continued) M TE R eceptacle Assem blies— Individual Form Plain, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. MTE Receptacle Assemblies H ousing Strip F orm Receptacle Assem bly Strip F orm Receptacle Assem bly Pos. AB Per Strip Plating A Plating B Plating C Plating A Plating B Plating C H ousings Segm ent 2 2 .000 [50.8 0] .1 98 [5.03] 10 5-10397 9-1 5-10397 8 -1 5-10397 7 -1 5-10397 6 -1 5-10397 5-1 5-10397 4-1 1036 8 8 -1 3 2 .400 [6 0.96 ] .2 98 [7 .57 ] 8 5-10397 9-2 5-10397 8 -2 5-10397 7 -2 5-10397 6 -2 5-10397 5-2 5-10397 4-2 1036 8 8 -2 4 1 .990 [50.55] .398 [10.11] 5 5-10397 9-3 5-10397 8 -3 5-10397 7 -3 5-10397 6 -3 5-10397 5-3 5-10397 4-3 1036 8 8 -3 5 1 .990 [50.55] .498 [12.6 5] 4 5-10397 9-4 5-10397 8 -4 5-10397 7 -4 5-10397 6 -4 5-10397 5-4 5-10397 4-4 1036 8 8 -4 6 2 .390 [6 0.7 1] .598 [15.19] 4 5-10397 9-5 5-10397 8 -5 5-10397 7 -5 5-10397 6 -5 5-10397 5-5 5-10397 4-5 1036 8 8 -5 7 1 .400 [35.56 ] .698 [17 .7 3] 2 5-10397 9-6 5-10397 8 -6 5-10397 7 -6 5-10397 6 -6 5-10397 5-6 5-10397 4-6 1036 8 8 -6 8 1 .600 [40.6 4] .798 [20.27 ] 2 5-10397 9-7 5-10397 8 -7 5-10397 7 -7 5-10397 6 -7 5-10397 5-7 5-10397 4-7 1036 8 8 -7 9 1 .8 00 [45.7 2] .8 98 [22.8 1] 2 5-10397 9-8 5-10397 8 -8 5-10397 7 -8 5-10397 6 -8 5-10397 5-8 5-10397 4-8 1036 8 8 -8 10 2 .000 [50.8 0] .998 [23.35] 2 5-10397 9-9 5-10397 8 -9 5-10397 7 -9 5-10397 6 -9 5-10397 5-9 5-10397 4-9 1036 8 8 -9 11 2 .2 00 [55.8 8 ] 1 .098 [27 .8 9] 2 6 -10397 9-0 6 -10397 8 -0 6 -10397 7 -0 6 -10397 6 -0 6 -10397 5-0 6 -10397 4-0 1-1036 8 8 -0 12 2 .400 [6 0.96 ] 1 .1 98 [30.43] 2 6 -10397 9-1 6 -10397 8 -1 6 -10397 7 -1 6 -10397 6 -1 6 -10397 5-1 6 -10397 4-1 1-1036 8 8 -1 N o. of D im ensions Individual Receptacle Assem bly Individual Receptacle Assem bly U nloaded Pos. B 30-2 6 AW G [0.05-0.1 5m m 2 ] W ire 2 6-2 2 AW G [0.1 2 -0.3m m 2 ] W ire H ousings Plating A Plating B Plating C Plating A Plating B Plating C 13 1 .2 98 [32.96 ] 6 -103903-2 6 -1036 8 4-2 6 -1036 8 5-2 6 -103902-2 6 -1036 8 6 -2 6 -1036 8 7 -2 1-1036 8 8 -2 14 1 .398 [35.51] 6 -103903-3 6 -1036 8 4-3 6 -1036 8 5-3 6 -103902-3 6 -1036 8 6 -3 6 -1036 8 7 -3 1-1036 8 8 -3 15 1 .498 [38 .05] 6 -103903-4 6 -1036 8 4-4 6 -1036 8 5-4 6 -103902-4 6 -1036 8 6 -4 6 -1036 8 7 -4 1-1036 8 8 -4 16 1 .598 [40.59] 6 -103903-5 6 -1036 8 4-5 6 -1036 8 5-5 6 -103902-5 6 -1036 8 6 -5 6 -1036 8 7 -5 1-1036 8 8 -5 17 1 .698 [43.13] 6 -103903-6 6 -1036 8 4-6 6 -1036 8 5-6 6 -103902-6 6 -1036 8 6 -6 6 -1036 8 7 -6 1-1036 8 8 -6 18 1 .798 [45.6 7 ] 6 -103903-7 6 -1036 8 4-7 6 -1036 8 5-7 6 -103902-7 6 -1036 8 6 -7 6 -1036 8 7 -7 1-1036 8 8 -7 19 1 .8 98 [48 .20] 6 -103903-8 6 -1036 8 4-8 6 -1036 8 5-8 6 -103902-8 6 -1036 8 6 -8 6 -1036 8 7 -8 1-1036 8 8 -8 20 1 .998 [50.7 5] 6 -103903-9 6 -1036 8 4-9 6 -1036 8 5-9 6 -103902-9 6 -1036 8 6 -9 6 -1036 8 7 -9 1-1036 8 8 -9 21 2 .098 [53.29] 7 -103903-0 7 -1036 8 4-0 7 -1036 8 5-0 7 -103902-0 7 -1036 8 6 -0 7 -1036 8 7 -0 2-1036 8 8 -0 22 2 .1 98 [55.8 3] 7 -103903-1 7 -1036 8 4-1 7 -1036 8 5-1 7 -103902-1 7 -1036 8 6 -1 7 -1036 8 7 -1 2-1036 8 8 -1 23 2 .2 98 [58 .37 ] 7 -103903-2 7 -1036 8 4-2 7 -1036 8 5-2 7 -103902-2 7 -1036 8 6 -2 7 -1036 8 7 -2 2-1036 8 8 -2 24 2 .398 [6 0.91] 7 -103903-3 7 -1036 8 4-3 7 -1036 8 5-3 7 -103902-3 7 -1036 8 6 -3 7 -1036 8 7 -3 2-1036 8 8 -3 25 2 .498 [6 3.45] 7 -103903-4 7 -1036 8 4-4 7 -1036 8 5-4 7 -103902-4 7 -1036 8 6 -4 7 -1036 8 7 -4 2-1036 8 8 -4 N otes: 1. R eceptacle assem blies are furnished w ith strip contacts partially inserted into housing— contacts latched into “preload” w indow s. C ontacts are fully inserted into housings autom atically w hen term inated w ith TE application m achines, or m anually w hen term inated w ith TE pistol grip hand tool. 2. U se Extraction/Lance Reset Tool N o. 8 43477-1 to rem ove receptacle contacts. 3. Keying plugs are available, see page 253.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE R eceptacle Assem blies— Polarized/Latching, Single-R ow , .10 0 [2 .54] C enterline M TE R eceptacle Assem blies M aterial and Finish H ousing — B lack therm oplastic, C ontacts — P hosphor B ronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .000050 [0.0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .000050 [0.0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 0 0 [0.002 54 ] tin over .0 0 0 0 50 [0 .0 0 1 2 7] nickel on entire contact N ote: Insulation displacem ent contacts accept an insulation diam eter of .030 [0.76] m in. to .0 54 [1 .37] m ax. w ith an insula - tion w all thickness of .0 1 5 [0.38] m ax. M ating post length for preloaded housings R elated Product D ata M ateable AM PM OD U Products Pin Assem blies (Polarized/ Latching) — pages 2 36, 2 37 Pin Assem blies w ith Guide R ibs (installed in Panel M ount Pin Shroud) — pages 2 38, 2 39, 2 4 2 H eaders (Polarized/Latching) — pages 2 4 4 -2 52 Interchangeable C rim p C ontacts (Short P oint) — page 2 53 Application Tooling — page 2 73 Perform ance Specifications — page 2 2 5 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 R eceptacle C ontacts (S ee N ote 1) Position N o. 1 Indicator (Farside) 1 .1 2 0 [28 .45] .600 [15.24] .098 [2.49] .1 00 [2.54] Typ. B Typ. A .52 0 [13.21] Preassem bled housings in strip form are available in positions 2 thru 1 2 . F or ease of handling, positions 2 thru 5 are recom m ended w hen using the TE M anual Pistol G rip Tool.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE R eceptacle Assem blies— Strip Form Polarized/Latching, Single-R ow , .10 0 [2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. MTE Receptacle Assemblies H ousing Strip F orm Receptacle Assem bly Strip F orm Receptacle Assem bly Pos. AB Per Strip Plating A Plating B Plating C Plating A Plating B Plating C H ousings Segm ent 2 2 .000 [50.8 0] .1 98 [5.03] 10 5-10396 1-1 5-10396 0-1 5-103959-1 5-103958 -1 5-103957 -1 5-103956 -1 104257 -1 3 2 .400 [6 0.96 ] .2 98 [7 .57 ] 8 5-10396 1-2 5-10396 0-2 5-103959-2 5-103958 -2 5-103957 -2 5-103956 -2 104257 -2 4 1 .990 [50.55] .398 [10.11] 5 5-10396 1-3 5-10396 0-3 5-103959-3 5-103958 -3 5-103957 -3 5-103956 -3 104257 -3 5 1 .990 [50.55] .498 [12.6 5] 4 5-10396 1-4 5-10396 0-4 5-103959-4 5-103958 -4 5-103957 -4 5-103956 -4 104257 -4 6 2 .390 [6 0.7 1] .598 [15.19] 4 5-10396 1-5 5-10396 0-5 5-103959-5 5-103958 -5 5-103957 -5 5-103956 -5 104257 -5 7 1 .400 [35.56 ] .698 [17 .7 3] 2 5-10396 1-6 5-10396 0-6 5-103959-6 5-103958 -6 5-103957 -6 5-103956 -6 104257 -6 8 1 .600 [40.6 4] .798 [20.27 ] 2 5-10396 1-7 5-10396 0-7 5-103959-7 5-103958 -7 5-103957 -7 5-103956 -7 104257 -7 9 1 .8 00 [45.7 2] .8 98 [22.8 1] 2 5-10396 1-8 5-10396 0-8 5-103959-8 5-103958 -8 5-103957 -8 5-103956 -8 104257 -8 10 2 .000 [50.8 0] .998 [23.35] 2 5-10396 1-9 5-10396 0-9 5-103959-9 5-103958 -9 5-103957 -9 5-103956 -9 104257 -9 11 2 .2 00 [55.8 8 ] 1 .098 [27 .8 9] 2 6 -10396 1-0 6 -10396 0-0 6 -103959-0 6 -103958 -0 6 -103957 -0 6 -103956 -0 1-104257 -0 12 2 .400 [6 0.96 ] 1 .1 98 [30.43] 2 6 -10396 1-1 6 -10396 0-1 6 -103959-1 6 -103958 -1 6 -103957 -1 6 -103956 -1 1-104257 -1 M TE R eceptacle Assem blies— Individual Form Polarized/Latching, Single-R ow , .10 0 [2 .54] C enterline N o. of D im ensions Individual Receptacle Assem bly Individual Receptacle Assem bly U nloaded Pos. B 30-2 6 AW G [0.05-0.1 5m m 2 ] W ire 2 6-2 2 AW G [0.1 2 -0.3m m 2 ] W ire H ousings Plating A Plating B Plating C Plating A Plating B Plating C 13 1 .2 98 [32.96 ] 6 -1038 97 -2 6 -1036 40-2 6 -1036 41-2 6 -1037 34-2 6 -1036 44-2 6 -1036 45-2 1-104257 -2 14 1 .398 [35.51] 6 -1038 97 -3 6 -1036 40-3 6 -1036 41-3 6 -1037 34-3 6 -1036 44-3 6 -1036 45-3 1-104257 -3 15 1 .498 [38 .05] 6 -1038 97 -4 6 -1036 40-4 6 -1036 41-4 6 -1037 34-4 6 -1036 44-4 6 -1036 45-4 1-104257 -4 16 1 .598 [40.59] 6 -1038 97 -5 6 -1036 40-5 6 -1036 41-5 6 -1037 34-5 6 -1036 44-5 6 -1036 45-5 1-104257 -5 17 1 .698 [43.13] 6 -1038 97 -6 6 -1036 40-6 6 -1036 41-6 6 -1037 34-6 6 -1036 44-6 6 -1036 45-6 1-104257 -6 18 1 .798 [45.6 7 ] 6 -1038 97 -7 6 -1036 40-7 6 -1036 41-7 6 -1037 34-7 6 -1036 44-7 6 -1036 45-7 1-104257 -7 19 1 .8 98 [48 .20] 6 -1038 97 -8 6 -1036 40-8 6 -1036 41-8 6 -1037 34-8 6 -1036 44-8 6 -1036 45-8 1-104257 -8 20 1 .998 [50.7 5] 6 -1038 97 -9 6 -1036 40-9 6 -1036 41-9 6 -1037 34-9 6 -1036 44-9 6 -1036 45-9 1-104257 -9 21 2 .098 [53.29] 7 -1038 97 -0 7 -1036 40-0 7 -1036 41-0 7 -1037 34-0 7 -1036 44-0 7 -1036 45-0 2-104257 -0 22 2 .1 98 [55.8 3] 7 -1038 97 -1 7 -1036 40-1 7 -1036 41-1 7 -1037 34-1 7 -1036 44-1 7 -1036 45-1 2-104257 -1 23 2 .2 98 [58 .37 ] 7 -1038 97 -2 7 -1036 40-2 7 -1036 41-2 7 -1037 34-2 7 -1036 44-2 7 -1036 45-2 2-104257 -2 24 2 .398 [6 0.91] 7 -1038 97 -3 7 -1036 40-3 7 -1036 41-3 7 -1037 34-3 7 -1036 44-3 7 -1036 45-3 2-104257 -3 25 2 .498 [6 3.45] 7 -1038 97 -4 7 -1036 40-4 7 -1036 41-4 7 -1037 34-4 7 -1036 44-4 7 -1036 45-4 2-104257 -4 N otes: 1. R eceptacle assem blies are furnished w ith strip contacts partially inserted into housing— contacts latched into “preload” w indow s. C ontacts are fully inserted into housings autom atically w hen term inated w ith TE application m achines, or m anually w hen term inated w ith TE pistol grip hand tool. 2. U se Extraction/Lance Reset Tool N o. 8 43477-1 to rem ove receptacle contacts. 3. Keying plugs are available, see page 253.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE R eceptacle Assem blies— Guide R ibs, Single-R ow , .10 0 [2 .54] C enterline M TE R eceptacle Assem blies Preassem bled housings in strip form are available in positions 2 thru 1 2 . F or ease of handling, positions 2 thru 5 are recom m ended w hen using the TE M anual Pistol G rip Tool. M aterial and Finish H ousing — B lack therm oplastic, C ontacts — P hosphor B ronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .000050 [0.0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .000050 [0.0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 0 0 [0.002 54 ] tin over .0 0 0 0 50 [0 .0 0 1 2 7] nickel on entire contact N ote: Insulation displacem ent contacts accept an insulation diam eter of .030 [0.76] m in. to .0 54 [1 .37] m ax. w ith an insula - tion w all thickness of .0 1 5 [0.38] m ax. M ating post length for preloaded housings R elated Product D ata C oupling Shrouds used w ith — Single-R ow — page 2 4 0 D ouble-R ow — page 2 4 1 M ateable AM PM OD U Products (w ith R eceptacle Assem blies Installed in Single-R ow C oupling Shrouds) — Pin Assem blies (Polarized/ Latching) — pages 2 36, 2 37 Pin Assem blies w ith Guide R ibs (installed in Panel M ount Pin Shroud) — pages 2 38, 2 39, 2 4 2 H eaders (Polarized/Latching) — pages 2 4 4 -2 52 M ateable AM PM OD U Products (w ith R eceptacle Assem blies Installed in D ouble-R ow C oupling Shrouds) — H eaders, Shrouded, D ouble-R ow (.318 [8.0 8] m ating post length, .150 [3.81] end dim ension) — pages 1 1 9-1 2 1 , 1 2 4 , 1 2 5, 1 2 8, 1 2 9, 1 31 -1 33 R eceptacle C ontacts (S ee N ote 1) Position N o. 1 Indicator (Farside) 1 .1 2 0 [28 .45] .600 [15.24] .098 [2.49] .1 00 [2.54] Typ B Typ. A .52 0 [13.21] Interchangeable C rim p C ontacts — (S hort P oint) — page 2 53 Application Tooling — page 2 73 Perform ance Specifications — page 2 2 5 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 5034 Application Specification 1 1 4 -2 502 6

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE R eceptacle Assem blies— Strip Form w ith Guide R ibs, Single-R ow , .10 0 [2 .54] C enterline (Continued) M TE R eceptacle Assem blies— Individual Form w ith Guide R ibs, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. MTE Receptacle Assemblies H ousing Strip F orm Receptacle Assem bly Strip F orm Receptacle Assem bly Pos. AB Per Strip Plating A Plating B Plating C Plating A Plating B Plating C H ousings Segm ent 2 2 .000 [50.8 0] .1 98 [5.03] 10 5-10397 3-1 5-10397 2-1 5-10397 1-1 5-10397 0-1 5-10396 9-1 5-10396 8 -1 1036 48 -1 3 2 .400 [6 0.96 ] .2 98 [7 .57 ] 8 5-10397 3-2 5-10397 2-2 5-10397 1-2 5-10397 0-2 5-10396 9-2 5-10396 8 -2 1036 48 -2 4 1 .990 [50.55] .398 [10.11] 5 5-10397 3-3 5-10397 2-3 5-10397 1-3 5-10397 0-3 5-10396 9-3 5-10396 8 -3 1036 48 -3 5 1 .990 [50.55] .498 [12.6 5] 4 5-10397 3-4 5-10397 2-4 5-10397 1-4 5-10397 0-4 5-10396 9-4 5-10396 8 -4 1036 48 -4 6 2 .390 [6 0.7 1] .598 [15.19] 4 5-10397 3-5 5-10397 2-5 5-10397 1-5 5-10397 0-5 5-10396 9-5 5-10396 8 -5 1036 48 -5 7 1 .400 [35.56 ] .698 [17 .7 3] 2 5-10397 3-6 5-10397 2-6 5-10397 1-6 5-10397 0-6 5-10396 9-6 5-10396 8 -6 1036 48 -6 8 1 .600 [40.6 4] .798 [20.27 ] 2 5-10397 3-7 5-10397 2-7 5-10397 1-7 5-10397 0-7 5-10396 9-7 5-10396 8 -7 1036 48 -7 9 1 .8 00 [45.7 2] .8 98 [22.8 1] 2 5-10397 3-8 5-10397 2-8 5-10397 1-8 5-10397 0-8 5-10396 9-8 5-10396 8 -8 1036 48 -8 10 2 .000 [50.8 0] .998 [23.35] 2 5-10397 3-9 5-10397 2-9 5-10397 1-9 5-10397 0-9 5-10396 9-9 5-10396 8 -9 1036 48 -9 11 2 .2 00 [55.8 8 ] 1 .098 [27 .8 9] 2 6 -10397 3-0 6 -10397 2-0 6 -10397 1-0 6 -10397 0-0 6 -10396 9-0 6 -10396 8 -0 1-1036 48 -0 12 2 .400 [6 0.96 ] 1 .1 98 [30.43] 2 6 -10397 3-1 6 -10397 2-1 6 -10397 1-1 6 -10397 0-1 6 -10396 9-1 6 -10396 8 -1 1-1036 48 -1 N o. of D im ensions Individual Receptacle Assem bly Individual Receptacle Assem bly U nloaded Pos. B 30-2 6 AW G [0.05-0.1 5m m 2 ] W ire 2 6-2 2 AW G [0.1 2 -0.3m m 2 ] W ire H ousings Plating A Plating B Plating C Plating A Plating B Plating C 13 1 .2 98 [32.96 ] 6 -103901-2 6 -1036 49-2 6 -1036 50-2 6 -103900-2 6 -1036 51-2 6 -1036 52-2 1-1036 48 -2 14 1 .398 [35.51] 6 -103901-3 6 -1036 49-3 6 -1036 50-3 6 -103900-3 6 -1036 51-3 6 -1036 52-3 1-1036 48 -3 15 1 .498 [38 .05] 6 -103901-4 6 -1036 49-4 6 -1036 50-4 6 -103900-4 6 -1036 51-4 6 -1036 52-4 1-1036 48 -4 16 1 .598 [40.59] 6 -103901-5 6 -1036 49-5 6 -1036 50-5 6 -103900-5 6 -1036 51-5 6 -1036 52-5 1-1036 48 -5 17 1 .698 [43.13] 6 -103901-6 6 -1036 49-6 6 -1036 50-6 6 -103900-6 6 -1036 51-6 6 -1036 52-6 1-1036 48 -6 18 1 .798 [45.6 7 ] 6 -103901-7 6 -1036 49-7 6 -1036 50-7 6 -103900-7 6 -1036 51-7 6 -1036 52-7 1-1036 48 -7 19 1 .8 98 [48 .20] 6 -103901-8 6 -1036 49-8 6 -1036 50-8 6 -103900-8 6 -1036 51-8 6 -1036 52-8 1-1036 48 -8 20 1 .998 [50.7 5] 6 -103901-9 6 -1036 49-9 6 -1036 50-9 6 -103900-9 6 -1036 51-9 6 -1036 52-9 1-1036 48 -9 21 2 .098 [53.29] 7 -103901-0 7 -1036 49-0 7 -1036 50-0 7 -103900-0 7 -1036 51-0 7 -1036 52-0 2-1036 48 -0 22 2 .1 98 [55.8 3] 7 -103901-1 7 -1036 49-1 7 -1036 50-1 7 -103900-1 7 -1036 51-1 7 -1036 52-1 2-1036 48 -1 23 2 .2 98 [58 .37 ] 7 -103901-2 7 -1036 49-2 7 -1036 50-2 7 -103900-2 7 -1036 51-2 7 -1036 52-2 2-1036 48 -2 24 2 .398 [6 0.91] 7 -103901-3 7 -1036 49-3 7 -1036 50-3 7 -103900-3 7 -1036 51-3 7 -1036 52-3 2-1036 48 -3 25 2 .498 [6 3.45] 7 -103901-4 7 -1036 49-4 7 -1036 50-4 7 -103900-4 7 -1036 51-4 7 -1036 52-4 2-1036 48 -4 N otes: 1. R eceptacle assem blies are furnished w ith strip contacts partially inserted into housing— contacts latched into “preload” w indow s. C ontacts are fully inserted into housings autom atically w hen term inated w ith TE application m achines, or m anually w hen term inated w ith TE pistol grip hand tool. 2. U se Extraction/Lance Reset Tool N o. 8 43477-1 to rem ove receptacle contacts. 3. Keying plugs are available, see page 253.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE H igh Pressure R eceptacle Assem blies— Plain, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. M TE R eceptacle Assem blies R eceptacle C ontacts (S ee N ote 1) Position N o. 1 Indicator (Farside) 1 .1 2 0 [28 .45] .600 [15.24] .098 [2.49] .1 00 [2.54] Typ. B Typ. A .52 0 [13.21] Strip F orm Strip F orm N o. of D im ensions H ousings Receptacle Receptacle Pos. Q uantities Per Assem bly Assem bly AB Strip Segm ent 30-2 6 AW G 2 6-2 2 AW G [.05-.1 5m m 2 ] W ire [.1 2 -.30m m 2 ] W ire 2 1 .98 0 [50.29] .1 98 [5.03] 10 5-104438 -1 5-104439-1 3 1 .490 [37 .8 5] .2 98 [7 .57 ] 5 5-104438 -2 5-104439-2 4 1 .990 [50.55] .398 [10.11] 5 5-104438 -3 5-104439-3 5 1 .990 [50.55] .498 [12.6 5] 4 5-104438 -4 5-104439-4 6 2 .390 [6 0.7 1] .598 [15.19] 4 5-104438 -5 5-104439-5 7 1 .400 [35.56 ] .698 [17 .7 3] 2 5-104438 -6 5-104439-6 8 1 .600 [40.6 4] .798 [20.27 ] 2 5-104438 -7 5-104439-7 9 1 .8 00 [45.7 2] .8 98 [22.8 1] 2 5-104438 -8 5-104439-8 10 2 .000 [50.8 0] .998 [23.35] 2 5-104438 -9 5-104439-9 11 2 .2 00 [55.8 8 ] 1 .098 [27 .8 9] 2 6 -104438 -0 6 -104439-0 12 2 .400 [6 0.96 ] 1 .1 98 [30.43] 2 6 -104438 -1 6 -104439-1 N otes: 1. R eceptacle assem blies are furnished w ith strip contacts partially inserted into housing— contacts latched into “preload” w indow s. C ontacts are fully inserted into housings autom atically w hen term inated w ith TE application m achines, or m anually w hen term inated w ith TE pistol grip hand tool. 2. H igh pressure receptacle contacts can be m ade available in other housing styles and position sizes. C ontact your TE sales representative. Preassem bled housings in strip form are available in positions 2 thru 1 2 . F or ease of handling, positions 2 thru 5 are recom - m ended w hen using the TE M anual Pistol G rip Tool. M aterial and Finish H ousing — B lack therm oplastic, C ontacts — P hosphor B ronze, duplex plated .0 0 0 0 30 [0 .0 0 0 76] gold on contact area, .0 0 0 0 50 [0 .001 2 7] m in. tin in crim p area, w ith entire contact underplated .0 0 0 0 50 [0 .001 2 7] nickel N ote: Insulation displacem ent contacts accept an insulation diam eter of .030 [0.76] m in. to .0 54 [1 .37] m ax. w ith an insulation w all thickness of .01 5 [0.38] m ax. M ating post length for preloaded m ax. R elated Product D ata M ateable AM PM OD U Products B reakaw ay H eaders — pages 1 02 - 1 1 0 , (w ith .2 30 m ating length) R eeled B reakaw ay H eaders — pages 1 0 6, 1 0 7 (w ith .2 30 m ating length) M achine Applied B andolier Posts — page 1 63 Application Tooling — page 2 73 Perform ance Specifications — page 2 2 5 Technical D ocum ents — pages 2 77, 2 78) Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE H igh Pressure R eceptacle Assem blies – Guide R ibs N ote: A ll part num bers are R oH S com pliant. MTE Pin Assemblies Preassem bled housings in strip form are available in positions 2 thru 1 2 . F or ease of handling, positions 2 thru 5 are recom - m ended w hen using the TE M anual Pistol G rip Tool. M aterial and Finish H ousing — T herm oplastic, black, C ontacts — P hosphor B ronze, duplex plated .0 0 0 0 30 [0.00076] gold on contact area, .0 0 0 0 50 [0.001 2 7] m in. tin on crim p area, w ith entire contact underplated .0 0 0 0 50 [0 .0 01 2 7] nickel. R elated Product D ata C oupling Shrouds used w ith — Single-R ow — page 2 4 0 D ouble-R ow — page 2 4 1 M ateable AM PM OD U Products (w ith R eceptacle Assem blies Installed in Single-R ow C oupling Shrouds) — Pin Assem blies (Polarized/ Latching) — pages 2 36, 2 37 Pin Assem blies w ith Guide R ibs (installed in Panel M ount Pin Shroud) — pages 2 38, 2 39, 2 4 2 H eaders (Polarized/Latching) — pages 2 4 4 -2 52 M ateable AM PM OD U Products (w ith R eceptacle Assem blies Installed in D ouble-R ow C oupling Shrouds) — H eaders, Shrouded, D ouble-R ow (.318 [8.0 8] m ating post length, .150 [3.81] end dim ension) — pages 1 1 9-1 2 1 , 1 2 4 , 1 2 5, 1 2 8, 1 2 9, 1 31 -1 33 Application Tooling — page 2 73 Perform ance Specifications — page 2 2 5 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 R eceptacle C ontacts (S ee N ote 1) Position N o. 1 Indicator (Farside) 1 .1 2 0 [28 .45] .600 [15.24] .098 [2.49] .1 00 [2.54] Typ B Typ. A .52 0 [13.21] Strip F orm Strip F orm N o. of D im ensions H ousings Receptacle Receptacle Pos. Q uantities Per Assem bly Assem bly AB Strip Segm ent 30-2 6 AW G 2 6-2 2 AW G [.05-.1 5m m 2 ] W ire [.1 2 -.30m m 2 ] W ire 2 1 .98 0 [50.29] .1 98 [5.03] 10 5-147 396 -1 5-147 030-3 3 1 .490 [37 .8 5] .2 98 [7 .57 ] 5 5-147 396 -2 5-147 030-4 4 1 .990 [50.55] .398 [10.11] 5 5-147 396 -3 5-147 030-1 5 1 .990 [50.55] .498 [12.6 5] 4 5-147 396 -4 5-147 030-2 6 2 .390 [6 0.7 1] .598 [15.19] 4 5-147 396 -5 5-147 030-5 7 1 .400 [35.56 ] .698 [17 .7 3] 2 5-147 396 -6 5-147 030-6 8 1 .600 [40.6 4] .798 [20.27 ] 2 5-147 396 -7 5-147 030-7 9 1 .8 00 [45.7 2] .8 98 [22.8 1] 2 5-147 396 -8 5-147 030-8 10 2 .000 [50.8 0] .998 [23.35] 2 5-147 396 -9 5-147 030-9 11 2 .2 00 [55.8 8 ] 1 .098 [27 .8 9] 2 6 -147 396 -0 6 -147 030-0 12 2 .400 [6 0.96 ] 1 .1 98 [30.43] 2 6 -147 396 -1 6 -147 030-1

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE Pin Assem blies, Shrouded— Polarized/Latching, Single-R ow , .10 0 [2 .54] C enterline M TE Pin Assem blies Preassem bled housings in strip form are available in positions 2 thru 1 2 . F or ease of handling, positions 2 thru 5 are recom - m ended w hen using the TE M anual Pistol G rip Tool. M aterial and Finish H ousing — B lack therm oplastic, C ontacts — P hosphor B ronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .000050 [0.0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .000050 [0.0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 0 0 [0.002 54 ] tin over .0 0 0 0 50 [0 .0 0 1 2 7] nickel on entire contact N ote: Insulation displacem ent contacts accept an insulation diam eter of .030 [0.76] m in. to .0 54 [1 .37] m ax. w ith an insula - tion w all thickness of .0 1 5 [0.38] m ax. R elated Product D ata M ateable AM PM OD U Products — R eceptacle Assem blies (Polarized/Latching) — pages 2 30 , 2 31 R eceptacle Assem blies w ith Guide R ibs (installed in Single-R ow C oupling Shroud) — pages 2 32 , 2 33, 2 35, 2 4 0 Interchangeable C rim p C ontacts — page 2 54 Application Tooling — page 2 73 Perform ance Specifications — page 2 2 5 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 .2 00 [5.08 ] .1 00 [2.54] Typ. Position N o. 1 Indicator 1 .470 [37 .34] .950 [24.13] B Typ. A .52 0 [13.21] .2 60 [6 .6 0] P in C ontacts (S ee N ote 1)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE Pin Assem blies, Shrouded— Strip Form Polarized/Latching, Single-R ow , .10 0 [2 .54] C enterline (Continued) M TE Pin Assem blies, Shrouded— Individual Form Polarized/Latching, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. MTE Pin Assemblies H ousing Strip F orm Pin Assem bly Strip F orm Pin Assem bly Pos. AB Per Strip Plating A Plating B Plating C Plating A Plating B Plating C H ousings Segm ent 2 2 .360 [59.94] .2 95 [7 .49] 8 5-103949-1 5-103948 -1 5-103947 -1 5-103946 -1 5-103945-1 5-103944-1 1036 53-1 3 1 .98 0 [50.29] .395 [10.03] 5 5-103949-2 5-103948 -2 5-103947 -2 5-103946 -2 5-103945-2 5-103944-2 1036 53-2 4 1 .98 0 [50.29] .495 [12.57 ] 4 5-103949-3 5-103948 -3 5-103947 -3 5-103946 -3 5-103945-3 5-103944-3 1036 53-3 5 2 .38 0 [6 0.45] .595 [15.11] 4 5-103949-4 5-103948 -4 5-103947 -4 5-103946 -4 5-103945-4 5-103944-4 1036 53-4 6 1 .390 [35.31] .695 [17 .6 5] 2 5-103949-5 5-103948 -5 5-103947 -5 5-103946 -5 5-103945-5 5-103944-5 1036 53-5 7 2 .390 [6 0.7 1] .795 [20.19] 3 5-103949-6 5-103948 -6 5-103947 -6 5-103946 -6 5-103945-6 5-103944-6 1036 53-6 8 1 .790 [45.47 ] .8 95 [22.7 3] 2 5-103949-7 5-103948 -7 5-103947 -7 5-103946 -7 5-103945-7 5-103944-7 1036 53-7 9 1 .990 [50.57 ] .995 [25.27 ] 2 5-103949-8 5-103948 -8 5-103947 -8 5-103946 -8 5-103945-8 5-103944-8 1036 53-8 10 2 .1 90 [55.6 3] 1 .095 [27 .8 1] 2 5-103949-9 5-103948 -9 5-103947 -9 5-103946 -9 5-103945-9 5-103944-9 1036 53-9 11 2 .390 [6 0.7 1] 1 .1 95 [30.35] 2 6 -103949-0 6 -103948 -0 6 -103947 -0 6 -103946 -0 6 -103945-0 6 -103944-0 1-1036 53-0 12 2 .590 [6 5.7 9] 1 .2 95 [32.8 9] 2 6 -103949-1 6 -103948 -1 6 -103947 -1 6 -103946 -1 6 -103945-1 6 -103944-1 1-1036 53-1 N o. of D im ensions Individual Pin Assem bly Individual Pin Assem bly U nloaded Pos. B 30-2 6 AW G [0.05-0.1 5m m 2 ] W ire 2 6-2 2 AW G [0.1 2 -0.3m m 2 ] W ire H ousings Plating A Plating B Plating C Plating A Plating B Plating C 13 1 .395 [35.43] 6 -1038 94-2 6 -1036 58 -2 6 -1036 59-2 6 -1038 93-2 6 -1036 6 0-2 6 -1036 6 1-2 1-1036 53-2 14 1 .495 [37 .97 ] 6 -1038 94-3 6 -1036 58 -3 6 -1036 59-3 6 -1038 93-3 6 -1036 6 0-3 6 -1036 6 1-3 1-1036 53-3 15 1 .595 [40.51] 6 -1038 94-4 6 -1036 58 -4 6 -1036 59-4 6 -1038 93-4 6 -1036 6 0-4 6 -1036 6 1-4 1-1036 53-4 16 1 .695 [43.05] 6 -1038 94-5 6 -1036 58 -5 6 -1036 59-5 6 -1038 93-5 6 -1036 6 0-5 6 -1036 6 1-5 1-1036 53-5 17 1 .795 [45.59] 6 -1038 94-6 6 -1036 58 -6 6 -1036 59-6 6 -1038 93-6 6 -1036 6 0-6 6 -1036 6 1-6 1-1036 53-6 18 1 .8 95 [48 .13] 6 -1038 94-7 6 -1036 58 -7 6 -1036 59-7 6 -1038 93-7 6 -1036 6 0-7 6 -1036 6 1-7 1-1036 53-7 19 1 .995 [50.6 7 ] 6 -1038 94-8 6 -1036 58 -8 6 -1036 59-8 6 -1038 93-8 6 -1036 6 0-8 6 -1036 6 1-8 1-1036 53-8 20 2 .095 [53.21] 6 -1038 94-9 6 -1036 58 -9 6 -1036 59-9 6 -1038 93-9 6 -1036 6 0-9 6 -1036 6 1-9 1-1036 53-9 21 2 .1 95 [55.7 5] 7 -1038 94-0 7 -1036 58 -0 7 -1036 59-0 7 -1038 93-0 7 -1036 6 0-0 7 -1036 6 1-0 2-1036 53-0 22 2 .2 95 [58 .29] 7 -1038 94-1 7 -1036 58 -1 7 -1036 59-1 7 -1038 93-1 7 -1036 6 0-1 7 -1036 6 1-1 2-1036 53-1 23 2 .395 [6 0.8 3] 7 -1038 94-2 7 -1036 58 -2 7 -1036 59-2 7 -1038 93-2 7 -1036 6 0-2 7 -1036 6 1-2 2-1036 53-2 24 2 .495 [6 3.37 ] 7 -1038 94-3 7 -1036 58 -3 7 -1036 59-3 7 -1038 93-3 7 -1036 6 0-3 7 -1036 6 1-3 2-1036 53-3 25 2 .595 [6 5.91] 7 -1038 94-4 7 -1036 58 -4 7 -1036 59-4 7 -1038 93-4 7 -1036 6 0-4 7 -1036 6 1-4 2-1036 53-4 N otes: 1. P in assem blies are furnished w ith strip contacts partially inserted into housing— contacts latched into “preload” w indow s. C ontacts are fully inserted into housings autom atically w hen term inated w ith TE application m achines, or m anually w hen term inated w ith TE pistol grip hand tool. 2. U se Extraction/Lance Reset Tool N o. 8 43477-1 to rem ove pin contacts.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE Pin Assem blies— Guide R ibs, Single-R ow , .10 0 [2 .54] C enterline M TE Pin Assem blies Preassem bled housings in strip form are available in positions 2 thru 1 2 . F or ease of handling, positions 2 thru 5 are recom - m ended w hen using the TE M anual Pistol G rip Tool. M aterial and Finish H ousing — B lack therm oplastic, C ontacts — P hosphor B ronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .000050 [0.0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .000050 [0.0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 0 0 [0.002 54 ] tin over .0 0 0 0 50 [0 .0 0 1 2 7] nickel on entire contact N ote: Insulation displacem ent contacts accept an insulation diam eter of .030 [0.76] m in. to .0 54 [1 .37] m ax. w ith an insula - tion w all thickness of .0 1 5 [0.38] m ax. R elated Product D ata M ateable AM PM OD U M TE Products (w ith Pin Assem bly Installed in Panel M ount Pin Shroud) — pages 2 4 2 , 2 4 3 R eceptacle Assem blies (Polarized/Latching) — pages 2 30 , 2 31 R eceptacle Assem blies w ith Guide R ibs (installed in Single R ow C oupling Shroud) — pages 2 32 , 2 33, 2 35, 2 4 0 Interchangeable C rim p C ontacts — page 2 54 Application Tooling — page 2 73 Perform ance Specifications — page 2 2 5 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 .098 [2.49] .1 00 [2.54] Typ. P in C ontacts (S ee N ote 1) Position N o. 1 Indicator (Farside) 1 .1 2 0 [28 .45] .600 [15.24] B Typ. A .52 0 [13.21]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE Pin Assem blies— Strip Form w ith Guide R ibs, Single-R ow , .10 0 [2 .54] C enterline (Continued) M TE Pin Assem blies— Individual Form w ith Guide R ibs, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. MTE Pin Assemblies N o. of D im ensions Individual Pin Assem bly Individual Pin Assem bly U nloaded Pos. B 30-2 6 AW G [0.05-0.1 5m m 2 ] W ire 2 6-2 2 AW G [0.1 2 -0.3m m 2 ] W ire H ousings Plating A Plating B Plating C Plating A Plating B Plating C 13 1 .398 [35.51] 6 -1038 96 -2 6 -1036 57 -2 6 -1036 56 -2 6 -1038 95-2 6 -1036 55-2 6 -1036 54-2 1-104503-2 14 1 .498 [38 .05] 6 -1038 96 -3 6 -1036 57 -3 6 -1036 56 -3 6 -1038 95-3 6 -1036 55-3 6 -1036 54-3 1-104503-3 15 1 .598 [40.59] 6 -1038 96 -4 6 -1036 57 -4 6 -1036 56 -4 6 -1038 95-4 6 -1036 55-4 6 -1036 54-4 1-104503-4 16 1 .698 [43.13] 6 -1038 96 -5 6 -1036 57 -5 6 -1036 56 -5 6 -1038 95-5 6 -1036 55-5 6 -1036 54-5 1-104503-5 17 1 .798 [45.6 7 ] 6 -1038 96 -6 6 -1036 57 -6 6 -1036 56 -6 6 -1038 95-6 6 -1036 55-6 6 -1036 54-6 1-104503-6 18 1 .8 98 [48 .20] 6 -1038 96 -7 6 -1036 57 -7 6 -1036 56 -7 6 -1038 95-7 6 -1036 55-7 6 -1036 54-7 1-104503-7 19 1 .998 [50.7 5] 6 -1038 96 -8 6 -1036 57 -8 6 -1036 56 -8 6 -1038 95-8 6 -1036 55-8 6 -1036 54-8 1-104503-8 20 2 .098 [53.29] 6 -1038 96 -9 6 -1036 57 -9 6 -1036 56 -9 6 -1038 95-9 6 -1036 55-9 6 -1036 54-9 1-104503-9 21 2 .1 98 [55.8 3] 7 -1038 96 -0 7 -1036 57 -0 7 -1036 56 -0 7 -1038 95-0 7 -1036 55-0 7 -1036 54-0 2-104503-0 22 2 .2 98 [58 .37 ] 7 -1038 96 -1 7 -1036 57 -1 7 -1036 56 -1 7 -1038 95-1 7 -1036 55-1 7 -1036 54-1 2-104503-1 23 2 .398 [6 0.91] 7 -1038 96 -2 7 -1036 57 -2 7 -1036 56 -2 7 -1038 95-2 7 -1036 55-2 7 -1036 54-2 2-104503-2 24 2 .498 [6 3.45] 7 -1038 96 -3 7 -1036 57 -3 7 -1036 56 -3 7 -1038 95-3 7 -1036 55-3 7 -1036 54-3 2-104503-3 25 2 .598 [6 5.99] 7 -1038 96 -4 7 -1036 57 -4 7 -1036 56 -4 7 -1038 95-4 7 -1036 55-4 7 -1036 54-4 2-104503-4 N otes: 1. P in assem blies are furnished w ith strip contacts partially inserted into housing— contacts latched into “preload” w indow s. C ontacts are fully inserted into housings autom atically w hen term inated w ith TE application m achines, or m anually w hen term inated w ith TE pistol grip hand tool. 2. U se Extraction/Lance Reset Tool N o. 8 43477-1 to rem ove pin contacts. H ousing Strip F orm Pin Assem bly Strip F orm Pin Assem bly Pos. AB Per Strip Plating A Plating B Plating C Plating A Plating B Plating C H ousings Segm ent 2 1 .98 0 [50.29] 0.1 98 [5.03] 10 5-103955-1 5-103954-1 5-103953-1 5-103952-1 5-103951-1 5-103950-1 104503-1 3 1 .490 [37 .8 5] 0.2 98 [7 .57 ] 5 5-103955-2 5-103954-2 5-103953-2 5-103952-2 5-103951-2 5-103950-2 104503-2 4 1 .990 [50.55] 0.398 [10.11] 5 5-103955-3 5-103954-3 5-103953-3 5-103952-3 5-103951-3 5-103950-3 104503-3 5 1 .990 [50.55] 0.498 [12.6 5] 4 5-103955-4 5-103954-4 5-103953-4 5-103952-4 5-103951-4 5-103950-4 104503-4 6 2 .390 [6 0.7 1] 0.598 [15.19] 4 5-103955-5 5-103954-5 5-103953-5 5-103952-5 5-103951-5 5-103950-5 104503-5 7 1 .400 [35.56 ] 0.698 [17 .7 3] 2 5-103955-6 5-103954-6 5-103953-6 5-103952-6 5-103951-6 5-103950-6 104503-6 8 1 .600 [40.6 4] 0.798 [20.27 ] 2 5-103955-7 5-103954-7 5-103953-7 5-103952-7 5-103951-7 5-103950-7 104503-7 9 1 .8 00 [45.7 2] 0.8 98 [22.8 1] 2 5-103955-8 5-103954-8 5-103953-8 5-103952-8 5-103951-8 5-103950-8 104503-8 10 2 .000 [50.8 0] 0.998 [25.35] 2 5-103955-9 5-103954-9 5-103953-9 5-103952-9 5-103951-9 5-103950-9 104503-9 11 2 .2 00 [55.8 8 ] 1 .098 [27 .8 9] 2 6 -103955-0 6 -103954-0 6 -103953-0 6 -103952-0 6 -103951-0 6 -103950-0 1-104503-0 12 2 .400 [6 0.96 ] 1 .1 98 [30.43] 2 6 -103955-1 6 -103954-1 6 -103953-1 6 -103952-1 6 -103951-1 6 -103950-1 1-104503-1

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System C oupling Shrouds for M TE R eceptacle Assem blies w ith Guide R ibs N ote: A ll part num bers are R oH S com pliant. M TE C oupling Shrouds P in A ssem bly, S hrouded Polarized/L atching (R efer to pages 236 & 237 ) R eceptacle A ssem blies w ith G uide R ibs (R efer to pages 232, 233, 235) H eaders, Polarized/L atching, S traight and R ight A ngle Post, w ith or w ithout H olddow n (S ee pages 244-252) Single-R ow M aterial B lack therm oplastic, 94 V-0 rated S ingle-R ow C oupling S hroud .58 2 [14.7 8 ] A .307 [7 .8 0] P in A ssem blies w ith G uide R ibs, Installed in Panel M ount P in S hroud (R efer to pages 238 , 239 & 242) N o. of D im ension Single-Row Pos. A Coupling Shroud 4 .48 5 [12.32] 1036 8 0-1 5 .58 5 [14.8 6 ] 1036 8 0-2 6 .68 5 [17 .40] 1036 8 0-3 7 .78 5 [19.94] 1036 8 0-4 8 .8 8 5 [22.48 ] 1036 8 0-5 9 .98 5 [25.02] 1036 8 0-6 10 1 .08 5 [27 .56 ] 1036 8 0-7 11 1 .1 8 5 [30.10] 1036 8 0-8 12 1 .2 8 5 [32.6 4] 1036 8 0-9 13 1 .38 5 [35.18 ] 1-1036 8 0-0 14 1 .48 5 [37 .7 2] 1-1036 8 0-1 N o. of D im ension Single-Row Pos. A Coupling Shroud 15 1 .58 5 [40.26 ] 1-1036 8 0-2 16 1 .68 5 [42.8 0] 1-1036 8 0-3 17 1 .78 5 [45.34] 1-1036 8 0-4 18 1 .8 8 5 [47 .8 8 ] 1-1036 8 0-5 19 1 .98 5 [50.42] 1-1036 8 0-6 20 2 .08 5 [52.96 ] 1-1036 8 0-7 21 2 .1 8 5 [55.50] 1-1036 8 0-8 22 2 .2 8 5 [58 .04] 1-1036 8 0-9 23 2 .38 5 [6 0.58 ] 2-1036 8 0-0 24 2 .48 5 [6 3.12] 2-1036 8 0-1 25 2 .58 5 [6 5.6 6 ] 2-1036 8 0-2 Typical Application of Single-R ow C oupling Shroud and M ating AM PM OD U M TE Products Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System C oupling Shrouds for M TE R eceptacle Assem blies w ith Guide R ibs (Continued) N ote: A ll part num bers are R oH S com pliant. MTE Coupling Shrouds A M P M OD U S hrouded H eaders D ouble-R ow, S traight or R ight–A ngle Post 1 R eceptacle A ssem blies w ith G uide R ibs (R efer to pages 232, 233 & 235) 1M ating A M P M OD U D ouble-R ow S hrouded H eaders m ust have .318 [8 .08 ] m ating post length and .150 [3.8 1] dim ension from centerline 1of last post to inside of end shroud w all. D ouble-R ow M aterial B lack therm oplastic, 94 V-0 rated D ouble-R ow C oupling S hroud .735 [18 .6 7 ] A Position N o. 1 Identification N o. of D im ension D ouble-Row Pos. A Coupling Shroud 8 .58 5 [14.8 6 ] 1036 8 1-1 10 .68 5 [17 .40] 1036 8 1-2 12 .78 5 [19.94] 1036 8 1-3 14 .8 8 5 [22.48 ] 1036 8 1-4 16 .98 5 [25.02] 1036 8 1-5 18 1 .08 5 [27 .56 ] 104500-1 20 1 .1 8 5 [30.10] 104500-2 22 1 .2 8 5 [32.6 4] 104500-3 24 1 .38 5 [35.18 ] 104500-4 26 1 .48 5 [37 .7 2] 104500-5 28 1 .58 5 [40.26 ] 104500-6 30 1 .68 5 [42.8 0] 104500-7 32 1 .78 5 [45.34] 104500-8 34 1 .8 8 5 [47 .8 8 ] 104500-9 40 2 .1 8 5 [55.50] 1-104500-0 50 2 .68 5 [6 8 .20] 1-104500-1 Typical Application of D ouble-R ow C oupling Shroud and M ating AM PM OD U Products Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Panel M ount Pin Shrouds for M TE Pin Assem blies w ith Guide R ibs, Single-R ow N ote: A ll part num bers are R oH S com pliant. M TE Panel M ount Pin Shrouds M aterial B lack therm oplastic, 94 V-0 rated .990 [25.15] A Position N o. 1 Identification N o. of D im ensions Panel M ount Pos. AB Pin Shroud 2 .735 [18 .6 7 ] .62 5 [15.8 8 ] 1036 8 2-1 3 .8 35 [21.21] .72 5 [18 .42] 1036 8 2-2 4 .935 [23.7 5] .8 2 5 [20.96 ] 1036 8 2-3 5 1 .035 [26 .29] .92 5 [23.50] 1036 8 2-4 6 1 .1 35 [28 .8 3] 1 .02 5 [26 .04] 1036 8 2-5 7 1 .2 35 [31.37 ] 1 .1 2 5 [28 .58 ] 1036 8 2-6 8 1 .335 [33.91] 1 .2 2 5 [31.12] 1036 8 2-7 9 1 .435 [36 .45] 1 .32 5 [33.6 6 ] 1036 8 2-8 10 1 .535 [38 .99] 1 .42 5 [36 .20] 1036 8 2-9 11 1 .635 [41.53] 1 .52 5 [38 .7 4] 1-1036 8 2-0 12 1 .735 [44.07 ] 1 .62 5 [41.28 ] 1-1036 8 2-1 13 1 .8 35 [46 .6 1] 1 .72 5 [43.8 2] 1-1036 8 2-2 .2 50 [6 .35] .31 0 [7 .8 7 ] .32 0 [8 .13] .2 70 [6 .8 6 ] .32 0 [8 .13] B N o. of D im ensions Panel M ount Pos. AB Pin Shroud 14 1 .935 [49.15] 1 .8 2 5 [46 .36 ] 1-1036 8 2-3 15 2 .035 [51.6 9] 1 .92 5 [48 .90] 1-1036 8 2-4 16 2 .1 35 [54.23] 2 .02 5 [51.44] 1-1036 8 2-5 17 2 .2 35 [56 .7 7 ] 2 .1 2 5 [53.98 ] 1-1036 8 2-6 18 2 .335 [59.31] 2 .2 2 5 [56 .52] 1-1036 8 2-7 19 2 .435 [6 1.8 5] 2 .32 5 [59.06 ] 1-1036 8 2-8 20 2 .535 [6 4.39] 2 .42 5 [6 1.6 0] 1-1036 8 2-9 21 2 .635 [6 6 .93] 2 .52 5 [6 4.14] 2-1036 8 2-0 22 2 .735 [6 9.47 ] 2 .62 5 [6 6 .6 8 ] 2-1036 8 2-1 23 2 .8 35 [7 2.01] 2 .72 5 [6 9.22] 2-1036 8 2-2 24 2 .935 [7 4.55] 2 .8 2 5 [7 1.7 6 ] 2-1036 8 2-3 25 3.035 [7 7 .09] 2 .92 5 [7 4.30] 2-1036 8 2-4 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Panel M ount Pin Shrouds for M TE Pin Assem blies w ith Guide R ibs, Single-R ow (Continued) MTE Panel Mount Pin Shrouds M aterial B lack therm oplastic, 94 V-0 rated Typical Application of Panel M ount Pin Shroud and M ating AM PM OD U Products P in A ssem bly w ith G uide R ibs (R efer to pages 238 & 239) R eceptacle A ssem blies w ith G uide R ibs, Installed in S ingle-R ow C oupling S hroud (R efer to pages 232, 233, 235 & 240) R eceptacle A ssem bly, Polarized/L atching (R efer to pages 230 & 231) Panel M ount P in S hroud R ear of Panel Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE H eaders, Shrouded Polarized/Latching, Single-R ow .10 0 [2 .54] C enterline M TE H eaders .0 2 5 [0 .64] Square Straight Post (W ith or W ithout Sw aged Tail) M aterial and Finish H ousing — B lack therm oplastic, Posts — B rass, plated as follow s: Plating A — D uplex plated .000030 [0.00076] gold on contact area, .0001 00 [0.002 54 ] m in. tin on solder area, w ith entire post underplated .000050 [0.001 2 7] nickel Plating B — D uplex plated .00001 5 [0.00038] gold on contact area, .0001 00 [0.002 54 ] m in. tin on solder area, w ith entire post underplated .000050 [0.001 2 7] nickel Plating C — .0001 00 [0.002 54 ] tin over .000050 [0.001 2 7] nickel on entire post R elated Product D ata M ateable AM PM OD U M TE Products — R eceptacle Assem blies (Polarized/Latching) — pages 2 30 , 2 31 R eceptacle Assem blies w ith Guide R ibs (installed in Single-R ow C oupling Shroud) — pages 2 32 , 2 33, 2 35, 2 4 0 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 .060 [1.52] .535 [13.59] Position N o. 1 Indicator .1 2 0 [3.05] .2 00 [5.08 ] .1 30 [3.30] .060 [1.52] .1 00 [2.54] .1 00 [2.54] Typ. .2 00 [5.08 ] R ef. (C ontact A rea) .2 30 [5.8 4] .350 [8 .8 9] *±.003 [±0.08 ]; tolerances not to accum ulate w ithin one connector pattern. N ote: S w aged retention tails are provided in a m inim um of tw o locations per header. Recom m ended PC Board H ole Layout or (for R etention Tails) A B C X X .2 75 [6 .98 ] .1 00* [2.54] Typ. C S w aged R etention Tail (S ee N ote) Section X-X

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE H eaders, Shrouded Polarized/Latching, Single-R ow .10 0 [2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. MTE Headers N o. of D im ensions Polarized/Latching H eader W ith Sw age Polarized/Latching H eader W ithout Sw age Pos. ABC Plating A Plating B Plating C Plating A Plating B Plating C N otes: 1. S electively loaded headers are available, consult TE. 2. U se K eying Tool N o. 91 41 7-1 to rem ove post for keying.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE H eaders, Shrouded Latching, Single-R ow .10 0 [2 .54] C enterline M TE H eaders .0 2 5 [0 .64] Square R ight-Angle Post M aterial and Finish H ousing — B lack therm oplastic, Posts — B rass, plated as follow s: Plating A — D uplex plated .000030 [0.00076] gold on contact area, .0001 00 [0.002 54 ] m in. tin on solder area, w ith entire post underplated .000050 [0.001 2 7] nickel Plating B — D uplex plated .00001 5 [0.00038] gold on contact area, .0001 00 [0.002 54 ] m in. tin on solder area, w ith entire post underplated .000050 [0.001 2 7] nickel Plating C — .0001 00 [0.002 54 ] tin over .000050 [0.001 2 7] nickel on entire post Recom m ended PC Board H ole Layout *±.003 [±0.08 ]; tolerance not to accum ulate w ithin one connector pattern. Recom m ended PC Board H ole Layout (PC board thickness (for H olddow n F eature) is .062 ±.008 [1 .57±0.2 0]) *±.003 [±0.08 ]; tolerance not to accum ulate w ithin one connector pattern. .535 [13.59] W ith H olddow n .060 [1.52] .1 2 0 [3.05] .2 00 [5.08 ] .1 30 [3.30] .060 [1.52] .1 00 [2.54] .1 00 [2.54] Typ. .2 00 [5.08 ] R ef. (C ontact A rea) .2 30 [5.8 4] .350 [8 .8 9] A B C X X .2 75 [6 .99] .365 [9.27 ] .1 45 [3.6 8 ] .1 00* [2.54] Typ. .340±.003 [1.40±0.08 ] Typ. C .035±.003 [0.8 9±0.08 ] D ia. Typ. .1 34±.003 [3.40±0.08 ] D ia. (2 P lc.) .535 [13.59] .060 [1.52] .1 2 0 [3.05] .2 00 [5.08 ] .1 30 [3.30] .060 [1.52] .1 00 [2.54] .1 00 [2.54] Typ. .2 00 [5.08 ] R ef. (C ontact A rea) .2 30 [5.8 4] .350 [8 .8 9] A B C X X .2 75 [6 .99] .1 45 [3.6 8 ] .1 00* [2.54] Typ. C .035±.003 [0.8 9±0.08 ] D ia. Typ. Section X-X Section X-X Position N o. 1 Indicator Position N o. 1 Indicator W ithout H olddow n R elated Product D ata M ateable AM PM OD U M TE Products — R eceptacle Assem blies (Latching) — pages 2 30, 2 31 R eceptacle Assem blies w ith Guide R ibs (installed in Single-R ow C oupling Shroud) — pages 2 32 , 2 33, 2 35, 2 4 0 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE H eaders, Shrouded Latching, Single-R ow .10 0 [2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. MTE Headers N o. of D im ensions Latching H eader W ith H old D ow n Latching H eader W ithout H old D ow n Pos. AB C Plating A Plating B Plating C Plating A Plating B Plating C N otes: 1. S electively loaded headers are available, consult TE. 2. U se K eying Tool N o. 91 41 7-1 to rem ove post for keying.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE H eaders, Shrouded Latching, Single-R ow .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. M TE H eaders .0 2 5 [0 .64] Square Straight Post (W ith Sw aged Tails and PC B oard Orientation) M aterial and Finish H ousing — B lack therm oplastic, Posts — B rass, plated .0001 00 [0.0 0 2 54 ] tin over .0 0 0 0 50 [0.001 2 7] nickel on entire post R elated Product D ata M ateable AM PM OD U M TE Products — R eceptacle Assem blies (Polarized/Latching) — pages 2 30 , 2 31 R eceptacle Assem blies w ith Guide R ibs (installed in Single-R ow C oupling Shroud) — pages 2 32 , 2 33, 2 35, 2 4 0 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 .535 [13.59] .1 2 0 [3.05] .1 00* [2.54] X X A .2 60 [6 .6 0] Typ. N o. of D im ensions Latching Pos. ABC H eader Section X-X .060 [1.52] (2 P lc.) .2 00 [5.08 ] B C .060 [1.52] .1 00 [2.54] Typ. .050 [1.27 ] .1 00 [2.54] .070 [1.7 8 ] .050 [1.27 ] D ia. C .065±.003 .1 35±.003 [3.43±0.08 ] .075±.003 (for R etention Tails) .2 30 [5.8 4] .1 30 [3.30] .350 [8 .8 9] S w aged R etention Tail (S ee N ote) *±.003 [±0.08 ]; tolerances not to accum ulate w ithin one connector pattern. N ote: S w aged retention tails are provided in a m inim um of tw o locations per header. Recom m ended PC Board H ole Layout Position N o. 1 Indicator

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE H eaders, Through-hole, Surface M ount C om patible, Shrouded Polarized/Latching, Single-R ow .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. MTE Headers .0 2 5 [0 .64] Square Straight Post (W ith Sw aged Tails and PC B oard Orientation) .1 2 0 [3.05] .1 00 [2.54] .1 30 [3.30] .060 [1.52] .2 30 [5.8 4] .060 [1.52] .535 [13.59] B C X X .2 62 [6 .6 5] .350 [8 .8 9] .2 00 [5.08 ] R ef. Typ. N o. of D im ensions Polarized/Latching Pos. AB C H eader, H igh-Tem p M aterial and Finish H ousing — B lack therm oplastic, Posts — B rass, duplex plated .00001 5 [0.0 0 0 38] gold on contact area, .0001 00 [0.0 0 2 54 ] m in tin on solder tail, w ith entire post underplated .0 00050 [0.0 0 1 2 7] nickel R elated Product D ata M ateable AM PM OD U M TE Products — R eceptacle Assem blies w ith Guide R ibs (installed in Single-R ow C oupling Shroud) — pages 2 32 , 2 33, 2 35, 2 4 0 R eceptacle Assem blies (Polarized Latching) — pages 2 30, 2 31 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 Section X-X A (C ontact A rea) .1 00 [2.54] .2 00 [5.08 ] .1 00* [2.54] Typ. S w aged R etention Tail (S ee N ote) Position N o. 1 Indicator .02 0±.002 [0.51±0.05] Typ. H eader P rofile (S how n for orientation purposes only) .040±.002 [1.02±0.05] Typ. P lated-Thru H ole Recom m ended PC Board H ole Layout (Stencil Thickness = .01 0 [0.2 5]) *±.003 [±0.08 ] tolerance not to accum ulate w ithin one connector pattern .1 35±.003 [3.43±0.08 ] .065±.003 [1.6 5±0.08 ] .075±.003 [1.90±0.08 ] .1 8 0±.002 [4.57 ±0.05]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE H eaders, Polarized/Latching, Through-H ole, Surface M ount C om patible, Single-R ow , .10 0 [2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. M TE H eaders Section X-X B X .535 [13.59] A .2 62 [6 .6 5] .2 00 [5.08 ] R ef. (C ontact A rea) .060 [1.52] (2 P lc.) .1 2 0 [3.05] .060 [1.52] .1 00 [2.54] .1 8 0 [4.57 ] .350 [8 .8 9] .1 45 [3.6 8 ] .2 30 [5.8 4] .1 00* [2.54] Typ. .058 ±.003 [1.47 ±0.08 ] (2 P lc.) .340±.003 [2.29±0.05] P lated-Thru H ole *±.003 [±0.08 ]; tolerance is not to accum ulate w ithin one connector pattern. Recom m ended PC Board (Stencil Thickness = .01 0 [0.2 5]) .0 2 5 [0 .64] Square R ight-Angle Post (W ith H olddow n) M aterial and Finish H ousing — B lack therm oplastic, Posts — B rass, duplex plated .00001 5 [0.0 0 0 38] gold on contact area, .0001 00 [0.0 0 2 54 ] m in. tin on solder tail, w ith entire post underplated .0 00050 [0.0 0 1 2 7] nickel R elated Product D ata M ateable AM PM OD U M TE Products — R eceptacle Assem blies (Polarized/ Latching) — pages 2 30 , 2 31 R eceptacle Assem blies w ith Guide R ibs (installed in Single-R ow C oupling Shroud) — pages 2 32 , 2 33, 2 35, 2 4 0 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 X C .1 00 [2.54] Typ. .093 +.003 .09 3-.000 2.36 +0.08 .09 3 -.000 .1 45 [3.6 8 ] .2 00 [5.08 ] .070±.002 [1.7 8 ±0.51] Typ. D ia. (2 P lc.) C N o. of D im ensions Right-Angle H eader Pos. ABC w ith H old D ow n N o. of D im ensions Right-Angle H eader Pos. ABC w ith H old D ow n Position N o. 1 Indicator

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System MTE Headers N ote: A ll part num bers are R oH S com pliant. N o. of D im ensions Right-Angle Latching SM T H eaders Pos. AB CD E Plating A Plating B Plating C M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated Posts — B rass, plated as follow s: Plating A — D uplex plated .000030 [.0 0 0 76] gold on contact area, .0001 00 [.0 0 2 54 ] m in. tin on solder area, w ith entire post underplated .0 00050 [.0 0 1 2 7] nickel. Plating B — D uplex plated .00001 5 [.0 0 0 38] gold on contact area, .0001 00 [.0 0 2 54 ] m in. tin on solder area, w ith entire post underplated .0 00050 [.0 0 1 2 7] nickel. Plating C — .0 0 0 1 0 0 [.002 54 ] tin over .00 0 0 50 [.0 0 1 2 7] nickel on entire post R ecom m ended PC B oard Layout (R efer to M T E A pplication S pec. 1 1 4 -2 50 2 6 for S tencil A perture L ayout Using .0 0 6 [0 .1 52 ] or .0 0 8 [0.2 03] S tencil T hickness) R elated Product D ata M ateable AM PM OD U M TE Products — R eceptacle Assem blies (Polarized/ Latching) — pages 2 30 , 2 31 R eceptacle Assem blies w ith Guide R ibs (installed in Single-R ow C oupling Shroud) — pages 2 32 , 2 33, 2 35, 2 4 0 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 .535 [13.59] .1 40 [3.56 ] .1 65±.003 [4.19±0.07 ] .1 33 [3.38 ] .2 65 [6 .7 3] D E C .054/.039 [1.37 /0.99] Ø .08 5±.002 [2.16 ±0.05] .1 36±.001 [3.45±0.02]

2 P lc

.1 90±.001 [4.8 3±0.02] .065 M in Pad on [1.6 5] U nderside 2 P lc .038 2 P lc [0.97 ] .1 2 0 [3.05] A B C K K .1 2 0 [3.05] .350 [8 .8 9] .2 00 [5.08 ] R ef C ontact A rea .2 00 [5.08 ] .002 [0.05] See L View L .076 [1.93] .2 8 8 [7 .32] R ef .2 62 [6 .6 5] .457 [11.6 1] R ef Position N o. 1 Indicator Ø .047 + .002 -.003 [1.19 + 0.05 - 0.07 ] .1 40±.002 [3.56 ±0.05] (Tangent of heel) (P lated thru hole) .02 5 [0.6 4] Typ. Section K -K Recom m ended PC Board Layout M TE H eaders, R ight-Angle, Polarized/Latching, Surface M ount

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M TE H eaders, Vertical, Polarized/Latching, Surface M ount M TE H eaders .075 [1.90] .535 [13.59] .063 [1.52] E .02 5 Typ. [0.6 2] .31 3 [7 .6 2] A B K K .02 5 [0.6 4] Typ. .1 00 [2.54] .2 00 [5.08 ] .1 2 0 [3.05] .2 30 [5.8 4] P ick and P lace C ap Position N o. 1 Indicator Position N o. 1 .1 00 [2.54] Typ. .055±.003 – .003 [1.32 + 0.05 – 0.07 ] .070±.002 [1.7 8 ±0.05] .08 8 ±.003 [2.25±0.08 ] D C 0.06 [1.53] .1 1 3 [2.8 8 ] .2 2 7 [5.7 6 ] N o. of D im ensions Vertical SM T H eaders Pos. AB CD E Plating A Plating B Plating C M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated Posts — B rass, plated as follow s: Plating A — D uplex plated .000030 [.0 0 0 76] gold on contact area, .0001 00 [.0 0 2 54 ] m in. tin on solder area, w ith entire post underplated .0 00050 [.0 0 1 2 7] nickel. Plating B — D uplex plated .00001 5 [.0 0 0 38] gold on contact area, .0001 00 [.0 0 2 54 ] m in. tin on solder area, w ith entire post underplated .0 00050 [.0 0 1 2 7] nickel. Plating C — .0 0 0 1 0 0 [.002 54 ] tin over .0 0 0 0 50 [.0 0 1 2 7] nickel on entire post R ecom m ended PC B oard Layout (R efer to M T E A pplication S pec. 1 1 4 -2 50 2 6 for S tencil A perature L ayout using .0 0 6 [0 .1 52 ] or .0 0 8 [0.2 03] stencil thickness R elated Product D ata M ateable AM PM OD U M TE Products — R eceptacle Assem blies (Polarized/ Latching) — pages 2 30 , 2 31 R eceptacle Assem blies w ith Guide R ibs (installed in Single-R ow C oupling Shroud) — pages 2 32 , 2 33, 2 35, 2 4 0 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6 Ø P lated Thru-H ole Section K -K N ote: A ll part num bers are R oH S com pliant. Recom m ended PC Board Layout

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Interchangeable C ontacts, W ire C rim p (Snap-In) MTE Headers M aterial and Finish C opper alloy C 70 2 5, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] m in. gold on contact area, .00 0 0 50 [0 .0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .00 0 0 50 [0 .0 0 1 2 7] m in. nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] m in. gold on contact area, .00 0 0 50 [0 .0 0 1 2 7] m in. tin in crim p area, w ith entire contact underplated .00 0 0 50 [0 .0 0 1 2 7] m in. nickel Plating C — .0 0 0 1 0 0 [0.002 54 ] m in. tin over .0 0 0 0 50 [0 .0 0 1 2 7] m in. nickel on entire contact .068 [1.7 3] C C .060 [1.52] .460 [11.6 8 ] Section C - C .01 2 [0.30] G ap H eavy D uty M iniature W ire Size Applicator for Applicator for Range Ins. F inish Contact Part N o. AM P-O -M ATIC H and AW G [m m 2 ] D ia. (Standard Pressure) AM P-O -LECTRIC Stripper/Crim per Tool Range Strip F orm Loose Piece M achine* M achine N os. .02 5-.060 P lating A 1-10448 1-1 1-10448 1-3 32-28 0.03-0.08 0.6 4-1.52 P lating B 1-10448 1-0 1-10448 1-2 56 7 296 -2 46 6 98 0-1 91518 -1 P lating C 5- 10448 1-2 5- 10448 1-6 .02 5-.060 P lating A 1- 10448 0-3 1- 10448 0-6 26 -22 0.13-0.3 0.6 4-1.52 P lating B 1- 10448 0-2 1- 10448 0-5 56 7 297 -2 46 6 98 1-1 91518 -1 P lating C 1- 10448 0-7 1- 10448 0-4 .02 5-.060 P lating A 1- 10447 9-0 1- 10447 9-3 24-20 0.2-0.5 0.6 4-1.52 P lating B 10447 9-9 1- 10447 9-2 56 7 298 -2 46 6 98 2-1 91551-1 P lating C 10447 9-8 1- 10447 9-1 *For use w ith M odel “K ” m achines. C all the Technical S upport C enter (1-8 00-522 -6 7 52) for part nos. of applicators for use w ith the M odel “G ” m achines (show n on page 27 0), as w ell as other bench m achines and fully autom atic A M P OM A TOR lead m aking m achines. N ote: These w ire crim p contacts can be interm ixed w ith insulation displacem ent crim p contacts. K eying Plug Part N o. 1 04072 -1 Ten plugs are supplied per strip. Order quantity reflects the num ber of strips required. Extraction/Lance Reset Tool N o. 8 43477-1 Short Point R eceptacles R elated Product D ata Perform ance C haracteristics — page 2 2 1 H ousings used in — S hort P oint— pages 2 2 3, 2 2 4 AM PM OD U M TE Unloaded H ousings — pages 2 2 8-2 33 Application Tooling — pages 2 70 -2 72 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-1 4 72 , 1 08-1 4 72 -1 Application Specification 1 1 4 -2 5038 N ote: A ll part num bers are R oH S com pliant.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Interchangeable C ontacts, W ire C rim p (Snap-In) (Continued) N ote: A ll part num bers are R oH S com pliant. M TE C ontacts M aterial and Finish P hosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.0 0 0 76] gold on contact area, .000030 [0.0 0 0 76] m in. tin in crim p area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating B — D uplex plated .00001 5 [0.0 0 0 38] gold on contact area, .000030 [0.0 0 0 76] m in. tin on solder area, w ith entire contact underplated .000050 [0.0 0 1 2 7] nickel Plating C — .0 0 0 1 0 0 [0.002 54 ] tin over .0 0 0 0 50 [0 .0 0 1 2 7] nickel on entire contact Extraction/Lance Reset Tool N o. 8 43477-1 Contact H eavy D uty Applicator for W ire Size Ins. D ia. Part N o. M iniature Applicator AM P-O -M ATIC H and Range Range F inish (Standard Pressure) for AM P-O -LECTRIC Stripper/ Tool AW G [m m 2 ] Strip Loose M achine* Crim per N os. F orm Piece M achine .02 5-.054 P lating A 5-104506 -6 5-104506 -7 32-28 0.03-0.08 0.6 4-1.37 P lating B 5-104506 -4 5-104506 -5 —— 58 342-2 P lating C 5-104506 -2 5-104506 -3 .036-.054 P lating A 5- 104505-6 5- 104505-7 26 -22 0.14-0.32 0.91-1.37 P lating B 5- 104505-4 5- 104505-5 56 7 239-2 46 6 98 3-1 91531-1 P lating C 5- 104505-2 5- 104505-3 *For use w ith A M P -O-L EC TR IC M odel “K ” m achines. C all Technical S upport C enter (1-8 00-522 -6 7 52) for part nos. of applicators for use w ith the A M P -O-L EC TR IC M odel “G ” m achines (show n on page 27 0), as w ell as other bench m achines and fully autom atic A M P OM A TOR lead m aking m achines. N ote: These w ire crim p contacts can be interm ixed w ith insulation displacem ent crim p contacts. .02 5 [0.6 4] .8 1 0 [20.57 ] .02 5 [0.6 4] Pins R elated Product D ata Perform ance C haracteristics — page 2 2 1 AM PM OD U M TE Unloaded H ousings — pages 2 2 8-2 33 Application Tooling — pages 2 70 -2 72 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 34 Application Specification 1 1 4 -2 50 2 6

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M T and Shielded M T Interconnection System N ote: A ll part num bers are R oH S com pliant. MT and Shielded MT Interconnection System W ire-to-B oard 5-1 02 398 -8 D -R A ssem bly 1 02 396-8 H erm aphroditic C overs 5-1 02 398 -8 D -R A ssem bly 1 02 396-8 H erm aphroditic C overs 5-1 02 398 -8 D -R A ssem bly 1 02 537-8 Ejection C over 1 02 536-8 B ack C over 5-1 02 398 -8 D -R A ssem bly 1 02 68 1 -5 L atching C over 1 02 536-8 B ack C over 5-1 02 398 -8 D -R A ssem bly 1 02 540-8 Polarizing C over 1 02 536-8 B ack C over 5-1 02 398 -8 D -R A ssem bly 1 02 541 -8 N on-Polarizing C over 1 02 536-8 B ack C over 1 02 1 8 5-2 L atch 51 02 1 54-4 H eader 5-1 031 68 -8 H dr 5-1 031 66-8 H eader 5-1 031 66-8 H eader Perform ance C haracteristics C ontact C urrent R ating — 3 am peres for single contact in free air. (A m perage could vary due to am bient tem perature, w ire size and duty cycles.) Operating Tem perature — -65°C to + 1 0 5°C Term ination R esistance — 1 2 m illiohm s m ax. M ax. M ating Force — High pressure - 2 6 oz. [7.2 3 N ] S tandard pressure - 9 oz. [2 .50 N ] M in. Unm ating Force — High pressure — 5 oz. [1 .39 N ] S tandard pressure — 1 .5 oz. [0 .4 1 7 N ] C ontact R etention in H ousing — 5 lb. [2 2 .2 4 N] per contact m in. Product Facts I Full line of m ass term ination tooling offers low est installed cost for m ost production needs I D ual cantilever beam s w ith anti-overstress features provide redundant contact of m ating post and lim it beam deflection, preventing perm anent deform ation I R edundant insulation displacem ent slots provide for m axim um reliability I Integral w ire strain relief on contact can prevent w ire m otion from being transm itted to w ire term ination areas I B uilt-in contact post stop can protect term inated w ire from being disturbed by over-insertion of m ating post, prevents w ire from entering contact area and positively lim its m ating connector dept h I Insulation displacem ent contacts and crim p, snap-in contacts are interchangeable I C om plete serviceability w ith replacem ent contacts I C over styles include low profile (polarized, non-polarized, latching and ejection) and standard profile (herm aphroditic and ejection) I C onnector housings m ay be stacked end-to-end w ithin one pair of covers. All varieties of covers in this catalog are suitable for m ultiple housing stacking applications sim ilar to the exam ple illustrated in the photograph to the right I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 The A M PM O D U M T and Shielded M T Interconnection System offers labor and cost savings through m ass term ination technology, w hile m aintaining the tim e- proven reliability of the A M PM O D U product fam ily. The M T system is com prised of preloaded, double-row receptacle assem blies w ith snap-on covers and a variety of shielding hardw are and accessories. The system is supported by a full line of m ass term ination tooling to m eet virtually m ost produc - tion needs. The insulation displacem ent contact, the heart of the M T system , features a m ating interface that is the sam e as the conventional A M PM O D U crim p, snap-in contact, fea - turing dual cantilever beam s, built-in overstress protection and a com pletely enclosed “box” design. To reduce E M I/E SD (electro - m agnetic interference/ electrostatic discharge) at the input-output interface, add-on m etal shields can be used to convert standard M T connectors to shielded M T connectors. Typical Application of End-to-End Stacking R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M T R eceptacle Assem blies, D ouble-R ow .10 0 x .10 0 [2 .54 x 2 .54] C enterline N ote: A ll part num bers are R oH S com pliant. M T R eceptacle Assem blies M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy, duplex plated .000030 [0.00076] gold in m ating area, .000050 [0.001 2 7] tin on solder tail, w ith entire contact underplated .000050 [0.001 2 7] nickel R elated Product D ata M ateable C onnectors — pages 1 1 7, 1 2 2 , 1 2 6, 1 30 , 2 64 C able Insulation W all Thickness — .0 1 5 [0 .39] m ax. C able Insulation D iam eter — M ating Post Length — Perform ance C haracteristics — page 2 55 R eplacem ent C ontacts — page 2 65 C onnector C overs — pages 2 58, 2 59 Application Tooling — pages 2 73-2 75 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 1 5, 1 0 8-2 50 1 8, 1 08-2 5030 Application Specification 1 1 4 -2 50 32 Instruction Sheet 4 0 8-6532 H ousings Pre-loaded w ith Standard Pressure C ontacts A M ax. B .1 00 [2.54] .600 [15.24] .1 2 5 [3.18 ] .1 00 [2.54] Typ. .2 70 [6 .8 6 ] Part N os. (Stam ped) N o. of D im ensions W ire Size Range U nloaded Pos. AB 30-2 6 AW G 2 6-2 2 AW G 2 2 -2 0 AW G H ousings 6 .300 [7 .6 2] .2 00 [5.08 ] 5-102393-1 5-102398 -1 5-102448 -1 102394-1 8 .400 [10.16 ] .300 [7 .6 2] 5-102393-2 5-102398 -2 5-102448 -2 102394-2 10 .500 [12.7 0] .400 [10.16 ] 5-102393-3 5-102398 -3 5-102448 -3 102394-3 12 .600 [15.24] .500 [12.7 0] 5-102393-4 5-102398 -4 5-102448 -4 102394-4 14 .700 [17 .7 8 ] .600 [15.24] 5-102393-5 5-102398 -5 5-102448 -5 102394-5 16 .8 00 [20.32] .700 [17 .7 8 ] 5-102393-6 5-102398 -6 5-102448 -6 102394-6 18 .900 [22.8 6 ] .8 00 [20.32] 5-102393-7 5-102398 -7 5-102448 -7 102394-7 20 1 .000 [25.40] .900 [22.8 6 ] 5-102393-8 5-102398 -8 5-102448 -8 102394-8 22 1 .1 00 [27 .94] 1 .000 [25.40] 5-102393-9 5-102398 -9 5-102448 -9 102394-9 24 1 .2 00 [30.48 ] 1 .1 00 [27 .94] 6 -102393-0 6 -102398 -0 6 -102448 -0 1-102394-0 26 1 .300 [33.02] 1 .2 00 [30.48 ] 6 -102393-1 6 -102398 -1 6 -102448 -1 1-102394-1 28 1 .400 [35.56 ] 1 .300 [33.02] 6 -102393-2 6 -102398 -2 6 -102448 -2 1-102394-2 30 1 .500 [38 .10] 1 .400 [35.56 ] 6 -102393-3 6 -102398 -3 6 -102448 -3 1-102394-3 32 1 .600 [40.6 4] 1 .500 [38 .10] 6 -102393-4 6 -102398 -4 6 -102448 -4 1-102394-4 34 1 .700 [43.18 ] 1 .600 [40.6 4] 6 -102393-5 6 -102398 -5 6 -102448 -5 1-102394-5 40 2 .000 [50.8 0] 1 .900 [48 .26 ] 6 -102393-8 6 -102398 -8 6 -102448 -8 1-102394-8 50 2 .500 [6 3.50] 2 .400 [6 0.96 ] 7 -102393-3 7 -102398 -3 7 -102448 -3 2-102394-3 6 0 3.000 [7 6 .20] 2 .900 [7 3.6 6 ] 7 -102393-8 7 -102398 -8 7 -102448 -8 2-102394-8 6 4 3.2 00 [8 1.28 ] 3.1 00 [7 8 .7 4] 8 -102393-0 8 -102398 -0 8 -102448 -0 3-102394-0 N ote: C ontact Extraction/Lance Reset Tool N o. 8 43477-3 , see page 26 5. Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon Keying Plugs Part N o. 8 7077-2 (P lugs directly into housing) 11111 C ircuit N o. 1 Identifier C ontact I.D . N o. .050 [1.27 ] .070 [1.7 8 ] .2 40 [6 .10] R ight-A ngle H eader M T R eceptacle A ssem bly P C B oard .2 70 [6 .8 6 ] .300 [7 .6 2]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M T R eceptacle Assem blies, D ouble-R ow .10 0 x .10 0 [2 .54 x 2 .54] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. MT Receptacle Assemblies M aterial and Finish H ousing — G lass-filled therm oplastic, black, 94 V-0 rated C ontacts — C opper alloy, duplex plated .000030 [0.00076] gold in m ating area, .000050 [0.001 2 7] tin on solder tails, w ith entire contact underplated .000050 [0.001 2 7] nickel R elated Product D ata M ateable C onnectors — pages 1 1 7, 1 2 2 , 1 2 6, 1 30 , 2 64 C able Insulation W all Thickness — .0 1 5 [0 .39] m ax. C able Insulation D iam eter — M ating Post Length — Perform ance C haracteristics — page 2 55 R eplacem ent C ontacts — page 2 65 C onnector C overs — pages 2 58, 2 59 Application Tooling — pages 2 73-2 75 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 1 5, 1 0 8-2 50 1 8, 1 08-2 5030 Application Specification 1 1 4 -2 50 32 Instruction Sheet 4 0 8-6532 H ousings Pre-loaded w ith H igh Pressure C ontacts A M ax. B .1 00 [2.54] .600 [15.24] .1 2 5 [3.18 ] .1 00 [2.54] Typ. .2 70 [6 .8 6 ] Part N os. (Stam ped*) N o. of D im ensions W ire Size Range Pos. AB 30-2 6 AW G 2 6-2 2 AW G 2 2 -2 0 AW G 6 .300 [7 .6 2] .2 00 [5.08 ] 5-1026 93-1 5-1026 94-1 5-1026 95-1 8 .400 [10.16 ] .300 [7 .6 2] 5-1026 93-2 5-1026 94-2 5-1026 95-2 10 .500 [12.7 0] .400 [10.16 ] 5-1026 93-3 5-1026 94-3 5-1026 95-3 12 .600 [15.24] .500 [12.7 0] 5-1026 93-4 5-1026 94-4 5-1026 95-4 14 .700 [17 .7 8 ] .600 [15.24] 5-1026 93-5 5-1026 94-5 5-1026 95-5 16 .8 00 [20.32] .700 [17 .7 8 ] 5-1026 93-6 5-1026 94-6 5-1026 95-6 18 .900 [22.8 6 ] .8 00 [20.32] 5-1026 93-7 5-1026 94-7 5-1026 95-7 20 1 .000 [25.40] .900 [22.8 6 ] 5-1026 93-8 5-1026 94-8 5-1026 95-8 *C avity identification — first cavity (one side); TE Part N o. and date code stam ped on housing w here size perm its. N ote: C ontact Extraction/Lance Reset Tool N o. 8 43477-3 , see page 26 5. Part N o. 8 62 8 6-1 (P lugs into receptacle contact) M aterial — Natural color nylon Keying Plugs Part N o. 8 7077-2 (P lugs directly into housing) C ircuit N o. 1 Identifier C ontact I.D . N o. .050 [1.27 ] .2 40 [6 .10] R ight-A ngle H eader M T R eceptacle A ssem bly P C B oard .2 70 [6 .8 6 ] .300 [7 .6 2] 444 4444 4 4

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Low Profile C overs for D ouble-R ow M T R eceptacle Assem blies N ote: A ll part num bers are R oH S com pliant. M T Low Profile C overs LL .750 [19.05] M aterial B lack therm oplastic, flam e retardant R elated Product D ata For use on D ouble-R ow M T R eceptacle A ssem blies — pages 2 56, 2 57 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 1 5, 1 0 8-2 50 1 8, 1 08-2 5030 Application Specification 1 1 4 -2 50 32 Instruction Sheet 4 0 8-6532 N ote: S ee page 259 for L ow P rofile C over Part N os. Front C overs .095 [2.41] Typ. .468 [11.8 9] .1 50 [3.8 1] .750 [19.05] .750 [19.05] .750 [19.05] A ssem bled* L L .48 0 [12.19] A - Polarizing Cover (M ates w ith A M P M OD U 4-sided shrouded headers. R efer to pages 117 , 122, 126 , 130.) B - Latching Cover (M ates w ith A M P M OD U 4-sided shrouded headers w ith extraction slot. R efer to pages 117 , 122, 126 , 130.) C - Ejection Cover (M ates w ith A M P -L A TC H universal ejection style pin headers equipped w ith latching ears, Part N o. 10218 5-2 (w ith push tabs) or Part N o. 102312-2 (w ithout push tabs), see TE C atalog 8 2012. D - N on-Polarizing Cover (D esigned for use w ith shielded connectors, pages 26 1 & 26 2; or for non-polarizing applications.) *D im ension applies to cover w hen installed on connector housing. B ack C overs E - F or Shielding and N on-Shielding Applications (For use w ith any low profile cover.) F - F or Shielding Applications (For use w ith N on-Polarizing C over only.)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Standard Profile C overs for D ouble-R ow M T R eceptacle Assem blies N ote: A ll part num bers are R oH S com pliant. MT Standard Profile Covers .8 50 [21.59] M aterial B lack therm oplastic, flam e retardant R elated Product D ata For use on D ouble-R ow M T R eceptacle A ssem blies — pages 2 56, 2 57 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 1 5, 1 0 8-2 50 1 8, 1 08-2 5030 Application Specification 1 1 4 -2 50 32 Instruction Sheet 4 0 8-6532 .095 [2.41] Typ. .1 50 [3.8 1] 1 .1 2 0 [28 .45] .468 [11.8 9] A ssem bled* Top V iew B ottom V iew 1 .1 2 0 [28 .45] L G - H erm aphroditic Cover (Tw o herm aphroditic covers can be used or one herm aphroditic cover can be used w ith an H Ejection C over. ) H - Ejection Cover (M ates w ith A M P -L A TC H universal ejection style pin headers equipped w ith latching ears, Part N o. 10218 5-2 (w ith push tabs) or Part N o. 102312-2 (w ithout push tabs), see TE C atalog 8 2012 . *D im ension applies to cover w hen installed on connector housing. Low Profile Covers Standard Profile Covers F ront Covers Back Covers N o. of D im ension EG HPos. L ABCD Shielding and F H erm aphroditic Ejection Polarizing Latching Ejection N on-Polarizing N on-Shielding Shielding Applications Applications 6 .300 [7 .6 2] 102540-1 — 102537 -1 102541-1 102536 -1 — 102396 -1 — 8 .400 [10.16 ] 102540-2 — 102537 -2 102541-2 102536 -2 — 102396 -2 — 10 .500 [12.7 0] 102540-3 — 102537 -3 102541-3 102536 -3 — 102396 -3 — 12 .600 [15.24] 102540-4 1026 8 1-1 102537 -4 102541-4 102536 -4 1028 23-5 102396 -4 — 14 .700 [17 .7 8 ] 102540-5 1026 8 1-2 102537 -5 102541-5 102536 -5 1028 23-6 102396 -5 — 16 .8 00 [20.32] 102540-6 1026 8 1-3 102537 -6 102541-6 102536 -6 1028 23-7 102396 -6 — 18 .900 [22.8 6 ] 102540-7 1026 8 1-4 102537 -7 102541-7 102536 -7 1028 23-1 102396 -7 — 20 1 .000 [25.40] 102540-8 1026 8 1-5 102537 -8 102541-8 102536 -8 1028 23-4 102396 -8 10326 8 -6 22 1 .1 00 [27 .94] 102540-9 1026 8 1-6 102537 -9 102541-9 102536 -9 1028 23-8 102396 -9 — 24 1 .2 00 [30.48 ] 1-102540-0 1026 8 1-7 1-102537 -0 1-102541-0 1-102536 -0 1028 23-9 1-102396 -0 10326 8 -7 26 1 .300 [33.02] 1-102540-1 1026 8 1-8 1-102537 -1 1-102541-1 1-102536 -1 1-1028 23-0 1-102396 -1 10326 8 -8 28 1 .400 [35.56 ] 1-102540-2 1026 8 1-9 1-102537 -2 1-102541-2 1-102536 -2 1-1028 23-1 1-102396 -2 — 30 1 .500 [38 .10] 1-102540-3 1-1026 8 1-0 1-102537 -3 1-102541-3 1-102536 -3 1-1028 23-2 1-102396 -3 10326 8 -9 32 1 .600 [40.6 4] — 1-1026 8 1-1 1-102537 -4 1-102541-4 1-102536 -4 1-1028 23-3 1-102396 -4 — 34 1 .700 [43.18 ] — 1-1026 8 1-2 1-102537 -5 1-102541-5 1-102536 -5 1-1028 23-4 1-102396 -5 1-10326 8 -0 40 2 .000 [50.8 0] — 1-1026 8 1-5 1-102537 -8 1-102541-8 1-102536 -8 1028 23-2 1-102396 -8 — 50 2 .500 [6 3.50] — 2-1026 8 1-0 2-102537 -3 2-102541-3 2-102536 -3 1028 23-3 2-102396 -3 1-10326 8 -3 6 0 3.000 [7 6 .20] —— 2-102537 -8 2-102541-8 2-102536 -8 — 2-102396 -8 — 6 4 3.2 00 [8 1.28 ] —— 3-102537 -0 3-102541-0 3-102536 -0 — 3-102396 -0 —

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Shielding H ardw are and Accessories for M T Interconnection System M T Shielding H ardw are and Accessories Product Facts I Add-on shielding accessories for existing AM PM OD U Standard M T and PC board m ounted headers I C om pact design I Tin plated copper alloy m aterial I R edundant cantilever beam s provide for good peripheral contact, elim inating the need for a separate R F gasket I Polarized m ating I 360 ° cable braid term ination w ith cable jacket support I C able shielding hardw are perm its m olded cable term inations after assem bly I M ust be used w ith braided shielded cables I Solder tabs on right-angle header shields are self-retaining in a PC board Shielded M T Receptacles Shielded Right-Angle H eaders The shielded A M PM O D U M T system features add-on m etal shielding kits for double-row standard M T receptacle assem blies and double-row right-angle headers. C able shielding hardw are consists of a ferrule and tw o stam ped and form ed shell halves. The inner shell half has a series of integral cantilever beam s to provide good peripheral contact w ith the m ating outer shell half. This feature also elim inates the need for a separate RF gasket. D etents in the cantilever beam provide a positive lock w hen the tw o halves are m ated. D uring assem bly the inner and outer shell halves are snapped together over a term inated standard M T connector. Shields for right-angle headers have integral cantilever beam s w hich provide good contact w ith the m ating shielded M T receptacle assem bly, w ithout the use of a separate RF gasket.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Shielding H ardw are and Accessories for D ouble-R ow M T R eceptacle Assem blies N ote: A ll part num bers are R oH S com pliant. MT Shielding Hardware and Accessories D im ensions Part N os. N o. of AB C O uter Inner Pos. Shell Shell N ote: M atch shield size to num ber of connector positions. Outer S hell H alf Flare braid over assem bled shells for crim ping under ferrule Ferrule P urchased separately (S ee page 26 3) S tandard M T R eceptacle A ssem bly P urchased separately (R efer to pages 256 & 257 ) Tw o-Piece Shields— Straight E xit M aterial and Finish Shell H alves — C opper alloy, .02 0 [0.51 ] thick; pretinned .0 00030 [0.0 0 0 76] m in. R elated Product D ata D ouble-R ow M T R eceptacle Assem blies — pages 2 56, 2 57 N on-Polarizing C overs (Part N o. Series 10 2 541 w ith back cover 10 2 536 or 10 2 82 3) — pages 2 58, 2 59 Shield Ferrules — page 2 63 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 1 5, 1 0 8-2 50 1 8, 1 08-2 5030 Application Specification 1 1 4 -2 50 32 Instruction Sheet 4 0 8-6532 A B C .32 6 [8 .28 ] Inner S hell H alf

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Shielding H ardw are and Accessories for D ouble-R ow M T R eceptacle Assem blies (Continued) N ote: A ll part num bers are R oH S com pliant. M T Shielding H ardw are and Accessories Outer S hell H alf Flare braid over assem bled shells for crim ping under ferrule Ferrule P urchased separately (S ee page 26 3) S tandard M T R eceptacle A ssem bly P urchased separately (R efer to pages 256 & 257 ) Tw o-Piece Shields— R ight-Angle E xit M aterial and Finish Shell H alves — C opper alloy, .02 0 [0.51 ] thick; pretinned .0 00030 [0.0 0 0 76] m in. R elated Product D ata D ouble-R ow M T R eceptacle Assem blies — pages 2 56, 2 57 N on-Polarizing C overs (Part N o. Series 10 2 541 w ith back cover 10 2 536 or 10 2 82 3) — pages 2 58, 2 59 Shield Ferrules — page 2 63 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 1 5, 1 0 8-2 50 1 8, 1 08-2 5030 Application Specification 1 1 4 -2 50 32 Instruction Sheet 4 0 8-6532 A B C .32 6 [8 .28 ] Inner S hell H alf N o. of D im ensions Part N os. Pos. AB C O uter Shell Inner Shell N otes: 1. M atch shield size to num ber of connector positions. 2. H ole is provided in 26 through 6 0-position cable shields for application of optional cable tie pull ring after assem bly. .1 2 5 [3.18 ] D ia. (S ee N ote 2)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. MT Shielding Hardware and Accessories Shielding H ardw are and Accessories for D ouble-R ow M T R eceptacle Assem blies (Continued) Ferrules for Shielding Kits M aterial and Finish S oft copper, tin plated R elated Product D ata Used w ith Shielding Kits — pages 2 61 , 2 62 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 1 5, 1 0 8-2 50 1 8, 1 08-2 5030 Application Specification 1 1 4 -2 50 32 Instruction Sheet 4 0 8-6532 AM P-O -LECTRIC M odel “G ” Term inating M achine TE H and Tool 91 41 0-1 (D ie Set required, see table below ) Application Tooling N o. of Straight-Exit Shields Right-Angle Exit Shields Cable D ia. F errule Applicator D ie* H and Tool D ie Sets Pos. O uter Inner O uter Inner Range Part N um ber Assem bly Part N o. Insulation Braid 6 10298 8 -2 10298 7 -6 —— 0.2 00 -0.2 50 [5.08 -6 .35] 10298 5-4 8 126 6 5-2 1-527 116 -8 527 116 -4 0.2 50-0.300 [6 .35-7 .6 2] 5-102903-2 8 126 6 5-5 1-527 116 -6 527 116 -3 10 103137 -2 103136 -2 —— 0.31 0-0.360 [7 .8 7 -9.14] 5-102903-1 8 126 6 5-4 1-527 116 -5 527 116 -3 0.370-0.42 0 [9.40-10.6 7 ] 5-1027 8 9-1 8 126 6 5-3 1-527 116 -4 527 116 -3 0.1 90-0.2 40 [4.8 3-6 .10] 5-102903-3 8 126 6 5-6 1-527 116 -7 527 116 -3 16 103153-2 103152-2 —— 0.2 50-0.300 [6 .35-7 .6 2] 5-102903-2 8 126 6 5-5 1-527 116 -6 527 116 -3 0.31 0-0.360 [7 .8 7 -9.14] 5-102903-1 8 126 6 5-4 1-527 116 -5 527 116 -3 0.370-0.42 0 [9.40-10.6 7 ] 5-1027 8 9-1 8 126 6 5-3 1-527 116 -4 527 116 -3 0.1 90-0.2 40 [4.8 3-6 .10] 5-102903-3 8 126 6 5-6 1-527 116 -7 527 116 -3 18 —— 1027 8 4-2 1027 8 3-2 0.2 50-0.300 [6 .35-7 .6 2] 5-102903-2 8 126 6 5-5 1-527 116 -6 527 116 -3 0.31 0-0.360 [7 .8 7 -9.14] 5-102903-1 8 126 6 5-4 1-527 116 -5 527 116 -3 0.370-0.42 0 [9.40-10.6 7 ] 5-102903-1 8 126 6 5-3 1-527 116 -4 527 116 -3 0.38 0-0.42 0 [9.6 5-10.6 7 ] 5-102903-6 1-8 126 6 5-5 1-527 116 -2 527 116 -1 50 103158 -2 103157 -2 1027 8 8 -2 1027 8 7 -2 0.430-0.460 [10.92-11.6 8 ] 5-102903-5 1-8 126 6 5-4 1-527 116 -1 527 116 -1 0.470-0.52 0 [11.94-13.21] 5-1027 8 9-3 1-8 126 6 5-3 1-527 116 -0 527 116 -1 6 0 —— 103141-2 103140-2 0.500-0.545 [12.7 0-13.8 4] 5-102903-7 1-8 126 6 5-7 —— 0.550-0.600 [13.97 -15.24] 5-1027 8 9-4 1-8 126 6 5-6 —— *For use w ith M odel “K ” m achines. C all the TE Technical S upport C enter (1-8 00-522 -6 7 52) for part nos. of applicators for use w ith the A M P -O-L EC TR IC M odel “G ” m achines (also show n on page 27 0), as w ell as other bench m achines and fully autom atic A M P OM A TOR lead m aking m achines. N otes: 1. Ferrules are used w ith shielding kits show n on pages 26 1 & 26 2, and are purchased separately. 2. Individual anvils and crim pers also m ay be purchased separately. 3. Ferrule Part N um ber 1-102903-8 also requires S pacer Part N um ber 527 116 -9.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Shielded M T H eaders for use w ith Shielded M T R eceptacle Assem blies N ote: A ll part num bers are R oH S com pliant. M T Shielded H eaders AM PM OD U R ight-Angle H eaders PC B oard M ounted M aterial and Finish H ousing — B lack therm oplastic, flam e retardant Posts — C opper alloy, plated .000030 [0.0 0 0 76] gold over .0 0 0 050 [0.001 2 7] nickel on entire post Shield — C opper alloy, .02 0 [0.51 ] thick; pretinned .0 0 0 0 30 [0.00076] m in. R elated Product D ata M ating C onnectors — D ouble-R ow M T R eceptacle A ssem blies w ith S hielding Hardw are — pages 2 56-2 63 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 1 5, 1 0 8-2 50 1 8, 1 08-2 5030 Application Specification 1 1 4 -2 50 32 . Instruction Sheet 4 0 8-6532 .460 [11.6 8 ] .550 [13.97 ] .1 2 5 [3.18 ] .02 5 [0.6 4] S q. Posts B A .755 [19.18 ] .2 90 [7 .37 ] C S hield .030 [0.7 6 ] .31 8 [8 .08 ] .1 35 [3.43] .434 [11.02] R ight-A ngle H eader AA .72 5 [18 .45] .1 45±.003 [3.6 8 ±0.08 ] 2 P lc. .1 45±.003 [3.6 8 ±0.08 ] 2 P lc. .1 00±.003 [2.54±0.08 ] .550±.003 [13.97 ±0.08 ] .040±.003 [1.02±0.08 ] D ia. (A ll holes) D ±.003 [±0.08 ] 2 D ±.003 [±0.08 ] D ±.003 [±0.08 ] 2 D ±.003 [±0.08 ] .1 00±.003 [2.54±0.08 ] .050±.003 [1.27 ±0.08 ] Recom m ended PC Board H ole Layout for 6, 8 and 1 0 Positions Recom m ended PC Board H ole Layout for 1 6 thru 50 Positions D - C ontact centerline is .100 [2.54]; ±.003 [0.08 ] tolerances not to accum ulate w ithin one connector pattern. N o. of D im ensions H eader Shield Pos. ABC Part N os. Part N os.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eplacem ent M T R eceptacle C ontacts N ote: A ll part num bers are R oH S com pliant. MT Contacts W ire Size Range Standard Pressure H igh Pressure Receptacle Receptacle AW G [m m 2 ] Contact Ident. Part N o. Contact Ident. Part N o. 30-26 0.05-0.15 1 5-102395-2 4 5-1026 41-6 26 -22 0.12-0.3 2 5-102399-1 5 5-1026 42-6 N ote: Term ination tooling for M T receptacle insulation displacem ent contacts is show n on pages 27 3-27 5. Insulation D isplacem ent C ontacts M aterial and Finish C opper alloy, duplex plated .000030 [0.0 0 0 76] gold in m ating area, .0001 00- .00 0 2 0 0 [0 .0 0 2 54 -0 .0 0 508] tin in crim p area, w ith entire contact underplated .00 0 0 50 [0 .0 0 1 2 7] nickel R elated Product D ata Perform ance C haracteristics — page 2 55 Application Tooling — pages 2 73-2 75 Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 1 5, 1 0 8-2 50 1 8, 1 08-2 5030 Application Specification 1 1 4 -2 50 32 Instruction Sheet 4 0 8-6532 .050 [1.27 ] M ax. Insulation D iam eter C ontact Identification M T receptacle contacts incorporate the follow ing features. C antilever B eam s W ide M isalignm ent Tolerance A nti- overstress The M T receptacle contact cross-section is prim arily rectangular, w ith rounded corners. Tw o integral cantilever beam s contact the m ating square m ale posts. D eflection of these spring m em bers is lim ited by anti-overstress and excessive perm anent deform ation is prevented. This feature allow s a w ide range for tolerance of m isalignm ent of m ating contacts. Extraction/Lance Reset Tool N o. 8 43477-3 The configuration of the receptacle com pletely encloses the spring m em bers helping to prevent dam age during handling and assem bly, and m akes the system com patible w ith autom atic application techniques.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ini-Tandem Spring R eceptacle H ousings and C ontacts M ini Tandem Spring H ousings and C ontacts Specifications C ontact C urrent R ating — 3 am peres Term ination R esistance — 1 2 m illiohm s (m ax.) — gold plated contacts 1 8 m illiohm s (m ax.) — tin plated contacts D urability — R ef. P roduct S pecification 1 0 8-2 50 31 Product Facts I Individual contacts m ate w ith .0 2 5 [0 .64] sq. posts, .12 5 [3.18] long I C rim p snap-in contacts accept 32 -2 2 AW G [0 .0 3-0 .32 m m 2 ] w ire I R etention latch provides for positive installation I N o insertion tool required I H igh durability design provides long life I Available w ith .0 0 0 0 15 [0 .0 0 0 38] or .0 0 0 0 30 [0 .0 0 0 76] thick gold inlay in contact areas, or bright tin plated I C losed-entry housings I M ini-contact box size: .0 60 [1.52 ] sq. I M ini-Tandem Spring H ousings can be stacked on .10 0 [2 .54] centers in either direction I M ini-Tandem Spring H ousings are R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 M ini-Tandem Spring Receptacle C ontacts are designed to m ate w ith .0 25 [0 .64] posts. W hen used individually, they w ill m ate w ith posts as short as .1 25 [3 .1 8] and w hen used in a housing, they w ill m ate w ith .1 40 [3 .55] long posts. These versatile contacts m ay be used for interconnecting posted pc panels, I/O w iring and cross-connecting pin arrays. The receptacle contact's box configuration provides for long contact life w ith controlled contact m ating forces w hich m inim ize w ear. A n external retention spring facilitates quick assem bly and provides firm seating in a contact housing. M ini-Tandem Spring Receptacle C ontacts are used in single- or double- row housings w ith .1 0 0 [2.54] centerline spacing. Single-row housings can be converted into double-row connectors on .1 0 0 x .20 0 [2.54 x 5.0 8] centers w ith the use of stacking clips. M ini-Tandem Spring Housings can be stacked side-by-side or end-to-end on .1 0 0 [2.54] centers. R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ini-Tandem Spring H ousings, Single-R ow N ote: A ll part num bers are R oH S com pliant. Spring Housings .10 0 [2 .54] C enterline M aterial — B lack glass-filled poly - ester, 94 V-0 rated A M ax. .550 [13.97 ] N o. of D im ensions H ousing Pos. ABC Part N o. 2 .2 00 [5.08 ] 1 .1 00 [2.54] 530554-1 4 .400 [10.16 ] 3 .300 [7 .6 2] 530554-3 8 .8 00 [20.32] 7 .700 [17 .7 8 ] 530554-7 12 1 .2 00 [30.48 ] 11 1 .1 00 [27 .94] 1-530554-1 16 1 .600 [40.6 4] 15 1 .500 [38 .10] 1-530554-5 18 1 .8 00 [45.7 2] 17 1 .700 [43.18 ] 1-530554-7 20 2 .000 [50.8 0] 19 1 .900 [48 .26 ] 1-530554-9 22 2 .2 00 [55.8 8 ] 21 2 .1 00 [53.34] 2-530554-1 N ote: M ini-Tandem S pring contacts for use in these housings are show n on page 26 9. .030 [0.7 6 ] .050 [1.27 ] .1 00 [2.54] M ax. .1 00 [2.54] B S paces @ .1 00 [2.54] = C M aterial — Natural color nylon,

94 V-2 rated

Part N o. 531 2 2 6-1 (P lugs directly into housing) .036 [0.91] .066 [1.6 8 ] .050 [1.27 ] M inim um m ating post length is .1 40 [3.55]. Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 31 Application Specification 1 1 4 -2 50 2 1

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ini-Tandem Spring H ousings, D ouble-R ow N ote: A ll part num bers are R oH S com pliant. M ini-Tandem Spring C ontacts .10 0 [2 .54] C enterline M aterial — B lack glass-filled polyester, 94 V-0 rated* A M ax. .550 [13.97 ] N o. of D im ensions H ousing Pos. ABC Part N o. 6 .300 [7 .6 2] 2 .2 00 [5.08 ] 530902-1 8 .400 [10.16 ] 3 .300 [7 .6 2] 530902-6 12 .600 [15.24] 5 .500 [12.7 0] 2-530902-0 16 .8 00 [20.32] 7 .700 [17 .7 8 ] 3-530902-0 N ote: M ini-Tandem S pring contacts for use in these housings are show n on page 26 9. .030 [0.7 6 ] .2 00 [5.08 ] .1 00 [2.54] B S paces @ .1 00 [2.54] = C M aterial — Natural color nylon, Part N o. 531 2 2 6-1 (P lugs directly into housing) *C onsult TE for specific U L recognition. .036 [0.91] .066 [1.6 8 ] .050 [1.27 ] M inim um m ating post length is .1 40 [3.55]. .1 00 [2.54] M ax. Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 31 Application Specification 1 1 4 -2 50 2 1

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M ini-Tandem Spring C ontacts N ote: A ll part num bers are R oH S com pliant. Mini-Tandem Spring Housings R eceptacle C ontacts M aterial and Finish Phosphor bronze, plated as follow s: Plating A — D uplex plated .000030 [0.00076] gold inlay on contact area, m atte tin in crim p area, w ith entire contact underplated .000050 [0.001 2 7] nickel Plating B — D uplex plated .00001 5 [0.00038] gold inlay on contact area, m atte tin in crim p area, w ith entire contact underplated .000050 [0.001 2 7] nickel Plating C — D uplex plated .000050 [0.001 2 7] over m atte tin in contact area, over .000030 [0.00076] nickel on entire contact Plating D — .0001 00 [0.002 54 ] m in. m atte tin over .000030 [0.00076] nickel on entire contact Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 0 8-2 5031 Application Specification 1 1 4 -2 502 1 .060 [1.52] .08 5 [2.15] M in. C ontact A rea w ith G old Inlay .060 [1.52] Low Pressure C ontacts M iniature Applicator for W ire Size Range Ins. D ia. Contact Part N o. Applicator for AM P-O -M ATIC AW G m m 2 Range F inish Strip F orm Loose Piece AM P-O -LECTRIC Stripper/Crim per M achine* M achine Standard Pressure C ontacts M iniature Applicator for W ire Size Range Ins. D ia. Contact Part N o. Applicator for AM P-O -M ATIC AW G m m 2 Range F inish Strip F orm Loose Piece AM P-O -LECTRIC Stripper/Crim per M achine* M achine .02 5-.054 P lating B 530901-2 530901-3 32-28 0.03-0.08 [0.6 4-1.37 ] P lating C 5530901-6 5530901-7 46 6 7 23-1 46 6 952-1 P lating D 5530901-4 5530901-5 .036-.054 P lating B 5530553-4 — 26 -22 0.14-0.32 [0.91-1.37 ] P lating C 5530553-6 — 46 6 8 19-2 46 6 943-1 P lating D 5530553-2 — H igh Pressure C ontacts M iniature Applicator for W ire Size Range Ins. D ia. Contact Part N o. Applicator for AM P-O -M ATIC AW G m m 2 Range F inish Strip F orm Loose Piece AM P-O -LECTRIC Stripper/Crim per M achine* M achine *For use w ith A M P -O-L EC TR IC M odel “K ” m achines. C all the Tooling/Technical A ssistance C enter (1-8 00-522-6 7 52) for part nos. of applicators for use w ith the A M P -O-L EC TR IC M odel “G ” m achines (show n on page 27 0), as w ell as other bench m achines and fully autom atic A M P OM A TOR lead m aking m achines. N otes: 1. M ini-Tandem S pring R eceptacle C ontacts are for use only in the housings show n on pages 26 7 & 26 8 . They cannot be used in A M P M OD U M od IV H ousings. 2. U se H and Tool N o. 91540-1 for crim ping loose-piece receptacles to all w ire sizes listed above. 3. A pplication tooling is described on pages 27 0 & 27 5.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for W ire C rim p C ontacts Application Tooling Tooling show n on this page is designed to term inate w ire crim p contacts used in various A M PM O D U w ire-to- board connectors. Refer to page 88 to determ ine the applicable connectors. This m achine autom atically strips as w ell as term inates individual w ires. Sim ilar to the A M P-O -LE C TRIC M odel “G ” m achine, applicators are quickly interchangeable, and it includes precision adjustm ent for crim p height. A ll adjustm ents can be m ade from the front of the m achine, w ithout special tools. F or further details, request TE C atalog 650 0 4. AM P-O-M ATIC Stripper/C rim per M achine Applicators Several term inating m achines, including the A M P-O -LE C TRIC M odel “G ”, A M P-O -M A TIC Stripper/ C rim per and A M PO M A TO R C LS m achines, are designed for use w ith interchangeable applicators. B asic styles are quickly interchangeable to m inim ize costly dow ntim es, and feature dial-in w ire and insulation crim p height settings. Special applicators are available for use w ith the C rim p F orce M onitor (see page 272), for m easuring the crim p height of each term ination as it is m ade, plus evaluating the quality of each crim p. E D GE , E lectronic Applicator C ounter The new versatile E D G E applicator counter tracks w earable tool usage for the m ost effective m aintenance planning. The com pletely electronic counter w ith clear LC D display, indicates cycles since installation. B y perform ing m aintenance at m easured intervals w ith pre-set lim its, operators avoid breakdow ns and rejects caused by tool w ear or m id-adjustm ent. F or m ore inform ation, request catalog 1 773 3 85. A totally new design of our m ost popular m achine for bench-top operation. It features a quiet and reliable direct m otor drive, electronic controls for easy setup and operation, and im proved guarding and lighting for operator convenience and safety. A ll versions include either m anual or autom atic precision adjustm ent for crim p height. F or further details, request TE C atalog 65828. H eavy D uty M iniature Applicators AM P-O-LE C TR IC M odel “G” Term inating M achine (Show n w ith Optional C rim p Force M onitor)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for W ire C rim p C ontacts (Continued) Application Tooling A s a value oriented term inator, the A M P 3 K/40 and A M P 5K/40 are designed for custom ers that require the increased output and quality of a sem iautom atic m achine at a com petitive price. B y incorporating the m ost com m only requested features as standard and offering a long list of optional equipm ent, these term inators offer flexibility to m eet the specific needs of various applications at the low est possible cost. AM P 3K/40 and AM P 5K/40 Term inators The com bination of the Stripping M odule w ith the A M P-O -LE C TRIC M odel G Term inator or the A M P

3 K/40 , 5K/40 provides an

econom ical, proficient m ethod of stripping w ire and crim ping term inals on the sam e m achine. W ires are stripped m om ents before crim ping, m eaning there is virtually no chance of dam aging w ire conductors during handling or storage. O nce the w ire is fed into the start sensor, the Stripping M odule does the rest, im proving placem ent accuracy. F or m ore inform ation, request catalog 1 3 0 90 85. Optional Stripping M odule for the AM P 3K/40 , AM P 5K/40 and the AM P-O-LE C TR IC M odel G AM P 5K /40 Term inator

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for W ire C rim p C ontacts (Continued) Application Tooling Tooling show n on this page is designed to term inate w ire crim p contacts used in various A M PM O D U w ire-to- board connectors. Refer to page 88 to determ ine the applicable connectors. The A M PO M A TO R System III is an autom atic m achine for the production of term inated w ire leads. The m achine com bines state of the art technology to process single and double w ire application utilizing the w ire processing industry’s best and m ost friendly subsystem s and accessories available to m eet the latest m arket requirem ents for w ire lead production. The new m achine incorporates a servo-driven, softw are-controlled A M P-O -LE C TRIC ST III term inator and the next generation System III A pplicator. See catalog 1 654956-5 for m ore inform ation. C om m ercial grade hand tool for crim ping various products. F eatures ratchet control to provide com plete crim p cycle. A ccepts both pinned- and shouldered- style die sets. Locators are provided w ith pinned-style die sets for proper contact and w ire positioning, and to help m inim ize contact rota - tion and bending during crim ping. A pproxim ate w eight 1 .3 lb [0 .60 kg]. Your quality program calls for m ore than a good crim ping system . It dem ands proof - the proof you get w ith the SLE C rim p F orce M onitor. It has high- resolution piezo-quartz sensor technology for a m ore precise identification of typical crim ping faults. The m onitor features Zone & Peak F orce A nalysis, 1 28x1 28 D ot M atrix, F orce Trigger and E ncoder Proxim ity Trigger, and A bsolute F orce M easurem ent for real-tim e m onitoring of every crim p. The C F M can be used w ith bench or fully-autom atic m achines. Special applicators are not required. Sure, you can sam ple and test crim p height w ith a m icrom eter. In fact, that’s how you standardize your process. B ut for ongoing quality control, testing every crim p, SLE is the choice. It’s know n w orldw ide, and m eets our standards for a high perform ance term inating system . That’s how you can be sure. High quality crim ping - w ith verification - m eans higher production and productivity. AM POM ATOR System III Leadm aker C rim p Force M onitor (C FM ) Prem ium C E R TI-C R IM P Straight Action H and Tool (SAH T) C om m ercial PR O-C R IM PE R III H and Tool TE hand tools are ideal for sm all production and proto - type applications. They fea - ture ratchet control to help elim inate partial crim ps, straight-line die closure, ter - m inal locator and support, and insulation crim p adjust - m ent. TE hand tools also can be adapted for use w ith pneum atic tooling assem - blies, providing air operated crim ping capabilities. F or further details on TE straight action hand tools, request TE C atalog 65780 . F or m ore details on TE pneum atic tooling assem - blies, call the TE Technical Support C enter, 1 -80 0 -522-6752.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling for Insulation D isplacem ent C rim p (ID C ) C ontacts and C onnectors N ote: A ll part num bers are R oH S com pliant. Application Tooling Pistol Grip M anual and Air Pow ered Tools The m anual pistol grip tool features an interchange- able m odular term inating head w hich also can be used in the pneum atic ver - sion, the B ench M ount Pneum atic Pow er A ssem bly and the ID C E lectric Pow er U nit. The head term inates one unstripped w ire per cycle and indexes the con - nector to the next term inat - ing position. The head rotates to perm it optim um access to the w iring area. The B ench M ount Pneum atic Pow er A ssem bly is air actu - ated w ith either a foot or knee sw itch. This capability frees the operator’s hands for optim um positioning. M odular H eads: 580 62 -1 (for M T connectors) 58336-1 (for M TE connectors) 58395-1 (for L evel V ID C connectors) 58540 -1 (for M TE connectors, discrete w ire or flat ribbon cable) Tooling show n on this page is designed to term inate ID C contacts for various A M PM O D U w ire-to-board connectors. Refer to page 88 to determ ine the applica - ble connectors. Bench M ounted Pneum atic Pow er Assem bly N o. 58 338 -1 ID C E lectric Pow er Unit This electrically pow ered sem iautom atic bench m achine is designed for applying A M PM O D U M TE and M T connectors to dis - crete w ires. It is portable and com pact and uses existing pistol grip m odular heads. The heads are easily interchanged to run different products. *The ID C E lectric Pow er U nit’s cycle rate is approxim ately 7,20 0 cycles per hour, w ith exact produc - tion rates depending upon operator dexterity. M odular H eads: 580 62 -1 (for M T connectors) 58336-1 (for M T E connectors) Pneum atic Pistol G rip Tool N o. 58 075-1 M anual Pistol G rip Tool N o. 58 074-1 ID C Electric Pow er U nit N o. 931 8 00-1 *A tube-fed track assem bly, Part N o. 8 56 6 7 5-1, also can be used w ith M TE C onnectors. This m odular head tool can be used on any pistol grip tool. It w as designed for dis - crete w ire or flat ribbon cable applications. M odular H ead Tool N o. 58540 -1

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Application Tooling Tooling show n on this page is designed to term inate ID C contacts for various A M PM O D U w ire-to-board connectors. Refer to page 88 to determ ine the appli - cable connectors. Tube-Fed R ibbon C able M achine 2 70 0 lb. Pow er Unit W ith C able N otching D ie E quipped w ith a cable notching die an adapter kit, this fully pneum atic bench m achine provides the 270 0 lb [1 2 0 1 0 N ] force required for end-notching ribbon cable. It features a grooved cable support plate, a pressure plate and a cable stop to facilitate cable alignm ent and positioning during the notching process. N otching D ies: 854449-1 (for 2 4 -2 2 A W G [0 .2 -0 .6 m m 2 ] W ire 854449-2 (for 2 8-2 6 A W G [0 .0 8-0 .1 5 m m 2 ] W ire Tube-F ed Ribbon Cable M achine N o. 8 56002 -1 2 700 lb. Pow er U nit N o. 31 2 52 2 -1 spring-driven unit w hich conveys connectors through the product tube to the term inating station. The air-operated term inating sta - tion positions and term i - nates contacts onto the notched cable. The seating station is m anually operated and seats connector hous - ings onto the term inated contacts. D esigned for bench appli - cations, this m achine is pneum atically operated and controlled by a foot pedal. It term inates connectors onto end-notched ribbon cable. *The connectors are sup - plied in strip form and in plastic tubes. The m achine consists of three basic sub - assem blies: a feed track, a term inating station and a seating station. The feed track is a constant force, *A t a rate of 13-25 positions at a tim e. Application Tooling for Insulation D isplacem ent C rim p (ID C ) C ontacts and C onnectors (Continued)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. Application Tooling Application Tooling for Insulation D isplacem ent C rim p (ID C ) C ontacts and C onnectors (Continued) Tooling show n on this page is designed to term inate ID C contacts for various A M PM O D U w ire-to-board connectors. Refer to page 88 to determ ine the applica - ble connectors. C H AM POM ATOR M odel 2 .5 Term inating M achine N o. 354786-(*) This com pact bench m achine term inates w ires m anually sorted from m ulticonductor cables. Term ination sequence m ay include full term ination of all contacts, or selective term i - nation. D esigned for easy program m ing, the m achine is m icroprocessor controlled and program m ed by a m em brane sw itch key - board. It also has an inter - nal storage capability for retaining up to 3 50 cable assem blies. C onnectors can be term inated w ith either straight or right-angle w ire dress. *F or applicable dash nos., call the Technical Support C enter: 1 -80 0 -522-6752. F or further details, request TE C atalog 82247 This floor m odel m achine autom atically sorts w ires from m ulticonductor jack - eted cable and term inates them in a user-determ ined sequence; either full term ina - tion of all contacts, or selec - tive term ination. D esigned for easy program m ing, the m achine is m icroprocessor controlled and program m ed by a touchscreen. It also has an internal storage capability for retaining up to 50 cable assem blies. C onnectors can be term inated w ith either straight or right- angle w ire dress. A ll cable assem blies are tested for continuity and shorts. *F or applicable dash nos., call the Technical Support C enter: 1 -80 0 -522-6752. F or further details, request TE C atalog 82247 C H AM POM ATOR M odel 3A Term inating M achine N o. 76142 0 -(*)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Technical D ocum ents for B oard-to-B oard Products N ote: A ll part num bers are R oH S com pliant. Technical D ocum ents Product Specifications describe technical perform ance characteristics and verification tests. They are intended for the D esign, C om ponent and Q uality E ngineers. PC /10 4 and PC /10 4- P lus C onnectors — Pages 5-12 : 1 0 8-1 956 PC /1 0 4 and PC /1 0 4- Plus C onnector System s R eceptacle Assem blies and Unshrouded B reakaw ay H eaders, Surface-M ount — Pages 10 9, 110 , 185-192 : 1 0 8-250 1 7 A M PM O D U Interconnection System , Tw o-Piece 1 0 8-250 22 A M PM O D U M od. IV Interconnection System , Vertical A ssem blies 1 0 8-250 26 A M PM O D U M od. II Interconnection System , Standard Pressure Receptacle A ssem bly and Header Tw o-Piece Printed C ircuit B oard C onnectors — Pages 193-2 0 2 : 1 0 8-1 6 A C TIO N PIN C ontacts 1 0 8-250 1 7 A M PM O D U Interconnection System , Tw o-Piece 1 0 8-250 27 A M PM O D U M od. II Interconnection System , Short-Point Receptacle A ssem bly and Header R eceptacle Assem blies, H orizontal and Vertical B oard M ount — Pages 168-192 : 1 0 8-250 22 A M PM O D U M od. IV Interconnection System , Vertical A ssem blies 1 0 8-250 26 A M PM O D U M od. II Interconnection System , Standard Pressure Receptacle A ssem bly and Header 1 0 8-250 27 A M PM O D U M od. II Interconnection System , Short-Point Receptacle A ssem bly and Header .0 2 5 [0 .64] Square Posts, H eaders, Accessories and Tooling — Pages 92 -10 5, 114-140 , 145-153, 163: 1 0 8-1 6 A C TIO N PIN C ontacts 1 0 8-250 26 A M PM O D U M od. II Interconnection System , Standard Pressure Receptacle A ssem bly and Header Application Specifications describe requirem ents for using the product in its intended application, and/or crim ping inform ation. They are intended for the Packaging and D esign E ngineers and the Setup person. PC /10 4 and PC /10 4- P lus C onnectors — Pages 5-12 : 1 1 4-1 3 0 21 PC /1 0 4 and PC /1 0 4- Plus C onnectors Tw o-Piece Printed C ircuit B oard C onnectors — Pages 193-2 0 2 : 1 1 4-90 0 9 A M PM O D U Header, Tw o-Piece, D ouble Row, A pplication of R eceptacle Assem blies, H orizontal and Vertical B oard M ount — Pages 168-192 : 1 1 4-250 1 8 A M PM O D U M od. II and IV Receptacle A ssem bly, PC B oard M ounted, Vertical, A pplication of .0 2 5 [0 .64] Square Posts, H eaders, Accessories and Tooling — Pages 92 -10 5, 114-140 , 145-153, 163-167: 1 1 4-250 28 A C TIO N PIN C ontacts w ith TE Headers, A pplication 1 1 4-1 3 0 1 1 A M PM O D U .0 25 and .0 45 Square C ontinuous Posts Instruction Sheets provide instructions for assem bling or applying the product. They are intended for the M anufacturing A ssem bler or O perator. PC /10 4 and PC /10 4- P lus C onnectors — Pages 5-12 : 40 8-850 2 F uture B oard A ssem bly 1 424685 for PC /1 0 4 and PC /1 0 4- Plus C onnectors 40 8-850 3 Seating Tool A ssem bly 1 424686 for PC /1 0 4 and PC /1 0 4- Plus C onnectors 40 8-850 4 Pneum atic Seating Tool A ssem bly 1 42493 0 -1 for PC /1 0 4 and PC /1 0 4- Plus C onnectors 40 8-850 5 M anual Seating Tool A ssem bly 1 42493 1 -1 for PC /1 0 4 and PC /1 0 4- Plus C onnectors Tw o-Piece Printed C ircuit B oard C onnectors — Pages 193-2 0 2 : 40 8-263 6 A C TIO N PIN C ontact Rear Insertion/E xtraction Tool 265871 -7 40 8-90 54 Seating Tools R eceptacle Assem blies, H orizontal and Vertical B oard M ount — Pages 168-192 : 40 8-741 1 Suggestions for W ave Soldering Vertical A M PM O D U Receptacles .0 2 5 [0 .64] Square Posts, H eaders, Accessories and Tooling — Pages 92 -10 5, 114-140 , 145-153, 163: 40 8-263 6 A C TIO N PIN C ontact Rear Insertion/E xtraction Tool 265871 -7 40 8-6944 TE U ninsulated B andolier Post Insertion Tool 91 41 9-1 40 8-7977 A M PM O D U D ouble Row, Straight Posts, E nd Shrouds .1 0 0 x .1 0 0 [0 .64 x 0 .64] C enters 40 8-7878 A M PM O D U Header B arrier Inserts 40 8-90 54 A C TIO N PIN C ontact Headers Seating Tool, 91 1 70 Series 40 8-970 7 Tool Kit 3 1 481 8-1 for B reakaw ay Headers H andbook Guide to Application of AC TION PIN C ontact C onnectors 5697 Various technical docum ents are available for your use.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Technical D ocum ents for W ire-to-B oard Products N ote: A ll part num bers are R oH S com pliant. Technical Documents Product Specifications describe technical perform ance characteristics and verification tests. They are intended for the D esign, C om ponent and Q uality E ngineers. Locking C lip C ontacts and H ousings — Pages 2 0 6-2 0 9: 1 0 8-3 60 28 C onnector, Locking C lip, .0 25 [0 .64] Square, G old 1 0 8-3 60 28-1 C onnector, Locking C lip, .0 25 [0 .64] Square, Tin M od. IV W ire-Applied C ontacts and H ousings — Pages 2 10 -2 2 0 : 1 0 8-250 0 7 A M PM O D U M od. V Interconnection System , W ire-A pplied (High Pressure) 1 0 8-250 1 9 A M PM O D U M od. IV M ale C onnectors 1 0 8-250 20 A M PM O D U M od. IV Interconnection System , (Standard Pressure) 1 0 8-250 21 A M PM O D U M od. IV.V Interconnection System , (Interm ediate Pressure) Short-Point W ire-Applied C ontacts and H ousings — Pages 2 2 1-2 2 4: 1 0 8-1 472 Short-Point C ontacts and Housings AM PM OD U M TE Interconnection System — Pages 2 2 5-2 52 : 1 0 8-250 3 4 A M PM O D U M TE C onnectors AM PM OD U M T and Shielded M T Interconnection System — Pages 2 55-2 65: 1 0 8-250 1 5 A M PM O D U M T Standard Pressure C onnectors 1 0 8-250 1 8 A M PM O D U M T High Pressure C onnectors 1 0 8-250 3 0 A M PM O D U M T Shielding A ccessories AM PM OD U Level V, ID C C onnectors — 1 0 8-250 28 Interconnection System , Insulation D isplacem ent C onnector, ID C Level M ini-Tandem Spring R eceptacle C ontacts — Pages 2 66-2 69: 1 0 8-250 3 1 Tandem Spring Receptacle C ontact Application Specifications describe requirem ents for using the product in its intended application, and/or crim ping inform ation. They are intended for the Packaging and D esign E ngineers and the Setup person. Locking C lip C ontacts and H ousings — Pages 2 0 6-2 0 9: 1 1 4-250 0 6 C ontact, Locking C lip, .0 25 [0 .64] Square, A pplication of M od. IV W ire-Applied C ontacts and H ousings — Pages 2 10 -2 2 0 : 1 1 4-250 0 3 A M PM O D U M od. IV (Standard Pressure), A M PM O D U M od. IV.V (Interm ediate Pressure) and A M PM O D U M od. V (High Pressure) Receptacle C ontacts, A pplication of 1 1 4-250 1 6 A M PM O D U M od. IV C rim p Pin C ontact Short-Point W ire-Applied C ontacts and H ousings — Pages 2 2 1-2 2 4: 1 1 4-250 3 8 Short-Point C ontacts and Housings AM PM OD U M TE Interconnection System — Pages 2 2 5-2 52 : 1 1 4-250 26 A M PM O D U M TE Interconnection System AM PM OD U M T and Shielded M T Interconnection System — Pages 2 55-2 65: 1 1 4-250 3 2 A M PM O D U M T Interconnection System and Shielding A ccessories, A pplication of AM PM OD U Level V, ID C C onnectors — 1 1 4-250 20 Interconnection System , ID C Level V, A pplication of M ini-Tandem Spring R eceptacle C ontacts — Pages 2 66-2 69: 1 1 4-250 21 Tandem Spring Receptacle C ontact, A pplication of Various technical docum ents are available for your use.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Technical D ocum ents for W ire-to-B oard Products (Continued) N ote: A ll part num bers are R oH S com pliant. Technical D ocum ents Instruction Sheets provide instructions for assem bling or applying the product. They are intended for the M anufacturing A ssem bler or O perator. Locking C lip C ontacts and H ousings — Pages 2 0 6-2 0 9: 40 8-760 4 TE E xtraction Tool 91 0 84-1 40 8-760 6 TE Locking C lip C ontacts and C onnectors 40 8-7627 TE Hand C rim p Tool 90 295-1 , 28-3 0 A W G W ire 40 8-8547 TE Hand C rim p Tool 91 53 3 -1 , 22-26 A W G W ire 40 8-93 88 TE Hand C rim p Tool 90 43 1 -1 , 20 A W G W ire M od. IV W ire-Applied C ontacts and H ousings — Pages 2 10 -2 2 0 : 40 8-43 79 TE PRO -C RIM PE R II Hand Tool 40 8-793 5 A M PM O D U Receptacle C onnectors w ith Strain Relief/Pull Tabs 40 8-8547 TE Hand Tool 91 51 6-1 , 91 51 7-1 and 91 541 -1 40 8-9451 TE E xtraction Tool 843 473 -1 for A M PM O D U W ire-A pplied Housings 863 0 8 40 8-9453 TE E xtraction Tools 843 996 and 843 477 for Rem oving A M PM O D U C rim p Snap-In Receptacle C ontacts from W ire-A pplied Housings AM PM OD U M TE Interconnection System — Pages 2 2 5-2 52 : 40 9-5746 TE E lectric Pow er U nit 93 1 80 0 -1 40 9-583 2 M TE Ribbon C able Term inator 8560 0 2-1 40 8-6789 TE Pneum atic Pistol Handle 580 75-1 40 8-6790 TE M anual Pistol Handle 580 74-1 40 8-691 9 A M PM O D U M TE C onnectors 40 8-8547 TE Hand C rim p Tool 91 51 8-1 and 91 551 -1 40 8-923 0 TE Keying Tool 91 41 7-1 40 8-93 59 M TE M odular Term inating Head 583 3 6-1 40 8-93 93 TE Pneum atic B ench A ssy. 583 3 8-1 40 8-940 7 TE Hand C rim p Tool 91 53 1 -1 and 583 42-2 40 8-9453 TE E xtraction Tools 843 996 and 843 477 for Rem oving A M PM O D U C rim p Snap-In Receptacle C ontacts from W ire-A pplied Housings 40 8-951 5 Ribbon C able N otcher 854449-[] AM PM OD U M T and Shielded M T Interconnection System — Pages 2 55-2 65: 40 8-653 2 A M PM O D U M T C onnectors AM PM OD U Level V, ID C C onnectors — 40 8-6843 TE E xtraction Tool 91 40 9-1 Standard Tandem Spring and M ini-Tandem Spring R eceptacle C ontacts — Pages 2 66-2 69: 40 8-790 9 TE Hand C rim ping Tool 91 540 -1

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Level V ID C C onnectors, .12 5 x .12 5 [3.18 x 3.18] C enterline Centerline Product Facts I Term ination of discrete w ire sizes 2 6-2 2 AW G [0 .12 -0 .3 m m 2 ] as w ell as jacketed cable and bonded ribbon cable (conductors separated) I C onnectors stackable end- to-end and side-to-side on .12 5 [3.18] centers I C onnectors preloaded w ith insulation displacem ent receptacle contacts I C ontact design em ploys dual cantilever beam s, redundant insulation displacem ent slots, built-in post stop and w ire support crim p I C opper alloy contacts are duplex plated I Snap-on covers w ith or w ithout cable tie paddles I Full line of m ass term ination tooling offers low est installed costs for m ost production needs I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 7189 A M PM O D U Level V ID C connectors provide cost effective discrete w ire con nections that are com patible w ith today's telecom m unica tions packaging techniques. These connectors are designed to m ate w ith .0 25 [0 .64] sq. posts on .1 25 x .1 25 [3 .1 8 x 3 .1 8] centers and are com prised of double-row housings preloaded w ith insulation displacem ent receptacle contacts, snap-on herm aphroditic covers, and a full line of m ass term ination tooling to m eet virtually every production need. F or m odular flexibility, connectors can be stacked end-to-end or side-to-side, m aintaining a .1 25 x .1 25 [3 .1 8 x 3 .1 8] centerline spacing. C overs can be furnished w ith and w ithout a cable tie paddle. The covers are sim ply snapped onto a housing after the connector has been term inated. The receptacle contacts feature the TE insulation displacem ent crim p technique for achieving top quality, low cost term inations. These contacts em ploy dual cantilever beam s for redundant interface w ith a m ating post, an integral post stop to lim it post m ating depth and protect the crim p term ination, and a w ire support (strain relief) crim p to prevent accidental w ire pull-out. The contacts are m ade of high conductivity copper alloy and are duplex plated. Perform ance C haracteristics C ontact C urrent R ating — 3 am peres Term ination R esistance — 1 2 m illiohm s (m ax.) D urability — R ef. P roduct S pecification 1 0 8-2 50 2 8 (Interconnection S ystem , Insulation D isplacem ent C onnector, ID C L evel) Application Specification 1 1 4 -2 50 2 0 (Interconnection S ystem , ID C L evel V, A pplication of) R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System R eceptacle Assem blies, D ouble-R ow , .12 5 x .12 5 [3.18 x 3.18] C enterline N ote: A ll part num bers are R oH S com pliant. C enterline H ousings Preloaded w ith Insulation D isplacem ent C rim p R eceptacle C ontacts M aterial and Finish H ousing — B lack therm oplastic, flam e retardant C ontacts — C opper alloy, duplex plated .0 0 0 0 50 [0 .0 0 1 2 7] gold on contact area, .0 0 0 1 0 0 [0 .002 54 ] m in. tin in crim p area, w ith entire contact underplated .0 0 0 0 50 [0 .001 2 7] nickel N ote: P reloaded contacts accept m ax. insulation dia. of .0 50 [1 .2 7]. The m ini - m um point of contact, as m easured from front edge of housing, is .095 [2 .4 1 ]. Technical D ocum ents — pages 2 77, 2 78 Product Specification 1 08-2 50 2 8 Application Specification 1 1 4 -2 50 2 0 Receptacle assem blies can be stacked end-to-end and side-to- side on .1 2 5 x .1 2 5 [3.1 8 x 3.1 8 ] centers. A B .8 00 [20.32] N o. of D im ensions Receptacle Assem bly (Stam ped 1 ) Pos. for 2 6-2 2 AW G AB [0.1 2 -0.3 m m 2 ] W ire 10 .61 8 [15.7 0] .500 [12.7 0] 102935-6 12 .743 [18 .8 7 ] .62 5 [15.8 8 ] 102935-8 16 .993 [25.22] .8 75 [22.23] 1-102935-2 20 1 .2 43 [31.57 ] 1 .1 2 5 [28 .58 ] 1-102935-6 24 1 .493 [37 .92] 1 .375 [34.93] 1-102935-9 30 1 .8 68 [47 .45] 1 .750 [44.45] 1-102935-3 32 1 .993 [50.6 2] 1 .8 75 [47 .6 3] 2-102935-8 40 2 .493 [6 3.32] 2 .375 [6 0.33] 3-102935-6 1W hite ink stam ped, one side— 8 - thru 12-position w ith A M P and arrow ; 14- and 16 -position w ith A M P , part no., and arrow ; 18 - thru 40-position w ith A M P , part no., date code and arrow. N otes: 1. C overs for these housings are show n on pages 28 1 & 28 2. 2. Term ination tooling for these connectors are show n on page 27 3-27 5. 3. 14- and 18 -position receptacle assem blies, as w ell as other sizes, can be m ade available upon request. C onsult TE. .2 98 [7 .57 ] .059 [1.50] .2 43 [6 .17 ] .1 2 5 [3.18 ] .1 2 5 [3.18 ] Typ.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System H erm aphroditic C overs for Level V ID C R eceptacle Assem blies, D ouble-R ow , .12 5 x .12 5 [3.18 x 3.18] C enterline N ote: A ll part num bers are R oH S com pliant. Centerline N o. of D im ensions Cover Part N os. Pos. W ithout W ith W ith W ide W ith W ide (H ousing AB C D E Cable Tie Cable Tie Cable Tie Cable Tie Size) Paddle Paddle Paddle Paddle and Polarization 6 4 S ee page 28 2 for D ouble C able Tie Paddle versions. N otes: 1. Tw o herm aphroditic covers of any style can be installed on a double-row connector housing. 2. Other sizes can be m ade available upon request. A ll covers illustrated here and on the follow ing page can be used on the double- row Level V ID C connectors show n on page 280 . M aterial B lack therm oplastic, flam e retardant, w ith W ide Cable Tie Paddle A .603 [15.32] .1 2 5 [3.18 ] Typ. A .603 [15.32] A .605 [15.37 ] 1 .1 05 [28 .07 ] C able Tie Paddle B C .1 2 5 [3.18 ] Typ. A .605 [15.37 ] .1 2 5 [3.18 ] Typ. .1 2 5 [3.18 ] Typ. Cover 1 03350 Series w ith W ide Cable Tie Paddle and Polarization .1 00 [2.54] (2 P lc.) C able Tie Paddle D

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System N ote: A ll part num bers are R oH S com pliant. C enterline H erm aphroditic C overs for Level V ID C R eceptacle Assem blies, D ouble-R ow , .12 5 x .12 5 [3.18 x 3.18] C enterline (Continued) .603 [15.32] .1 00 [2.54] Typ. 1 .1 03 [28 .02] C able Tie Paddle .1 2 5 [3.18 ] Typ. 1 .31 2 [33.32] Typ. .600 [15.24] Typ. 3.991 [101.37 ] Cover Part N o. 1 0458 3-1 , 64-Position w ith D ouble Cable Tie Paddle .603 [15.32] .1 00 [2.54] Typ. 1 .1 03 [28 .02] C able Tie Paddle .1 2 5 [3.18 ] Typ. 1 .31 2 [33.32] Typ. .600 [15.24] Typ. 3.991 [101.37 ] Cover Part N o. 1 0458 4-1 , 64-Position w ith D ouble Cable Tie Paddle and Polarization .91 6 [23.27 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U .0 31 x .0 62 [0 .79 x 1.57] Interconnection System Mod I 0.031 x 0.062 Interconnection System The .0 3 1 x .0 62 [0 .79 x 1 .57] interconnection system has served as an industry standard for m odular packaging for over three decades. It is a rugged, large scale system designed for board-to-board and board-to-w ire or cable applications that has offered m illions of reliable interconnections and countless m ating cycles. This versatile interconnection system successfully m eets the requirem ents for m ost m odular pow er supply packaging. B oard m ounted receptacles and receptacle assem blies are available in various geom etries, offering packaging interconnections that include perpendicular, parallel and stacking capabilities. M achine applied term inations, through m atched application equipm ent, are geared to virtually any production requirem ent, assuring the low est possible applied cost. C rim p snap-in receptacles for 26-1 8 A W G [0 .1 2 – 0 .9m m 2] w ire provide excellent discrete w ire term inations. Housings for these contacts provide for ease of handling term inations in high density applications. A M PM O D U m ating posts are supplied typically as header assem blies. They are available in various sizes to m eet the interconnection and packaging requirem ents of your system . How ever, in instances w here packaging configurations do not lend them selves to the econom ies of assem blies, TE can provide for the discrete location of individual posts and receptacles. If your interconnections require Top E ntry, B ottom E ntry and/or Side E ntry for perpendicular, parallel and stacked configurations, the .0 3 1 x .0 62 [0 .79 x 1 .57] interconnection system can fulfill your needs w ith the low est applied cost through efficient interconnections and supporting application equipm ent. Product Facts I R ugged connector system featuring .0 31 x .0 62 [0 .79 x 1.57] posts w ith m ating receptacles I C urrent rating 5 am ps m ax per contact. Varies due to am bient tem perature, w ire size and duty cycles. I Available for board-to-board and w ire-to-board I Posts available on strip for m achine application directly to pc board or in housings for board m ounting I R eceptacles available for board m ounting or w ire crim ping I C ontacts available in both tin and gold plating I Flam e retardant therm oplastic housings 94V-0 rated I Locking C lip contacts available to m ate w ith .0 31 x .0 62 [0 .79 x 1.57] posts I R ecognized under the C om ponent Program of Underw riters Laboratories Inc., File N o. E 2 8476 I C ertified by C anadian Standards Association, File N o. LR 16455 R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System AM PM OD U .0 31 x .0 62 [0 .79 x 1.57] Interconnection System (Continued) M od I 0 .0 31 x 0 .0 62 Interconnection System The A M PM O D U receptacle cross-section is prim arily rectangular, w ith rounded corners. Tw o integral cantilever beam s contact the m ating square or rectangular posts. D eflection of these spring m em bers is lim ited by anti- overstress and excessive perm anent deform ation is prevented. This feature allow s a w ide range of tolerances for m isalignm ent of m ating contacts. The configuration of the receptacle com pletely encloses the spring m em bers preventing dam age during handling and assem bly and m akes the system com patible w ith autom atic application techniques. This design also perm its the use of the receptacles w ithout housings or encapsulation. N ote: A pplication of a contact lubricant is part of the m anufacturing process of all A M PM O D U tin-plated crim p products. How ever, it is not part of the m anufacturing process of products that custom ers w ill solder, then clean. F or these products, TE recom m ends that custom ers purchase a contact lubricant. (See application specification 1 1 4-250 0 4 for further inform ation.) R ugged-self supporting, one- piece contact body R eliability-dual cantilever spring contact design and built-in anti-overstress Offers high or low contact forces C antilever B eam s W ide M isalignm ent Tolerance W ide entry for post to receptacle m isalignm ent A nti-overstress Insulation S upport B arrel W ire Crim p Receptacle S tandard P rofile H ousing, U nkeyed for C rim p S nap-In R eceptacles (Page 291 & 292) L ocking C lip C ontacts (Page 298 ) L ocking C lip C onnector (Page 299) H eader, R ight-A ngle Post, Keyed (Page 297 ) H eader, R ight-A ngle Post, Keyed (Page 297 ) R eceptacles, C rim p S nap-In (Page 290) L ow P rofile H ousing, Keyed (Page 293) S traight Posts M achine A pplied (Page 294) S traight Posts M achine A pplied (Page 294) B oard M ount R eceptacle A ssem bly, H orizontal (Pages 28 8 & 28 9) B oard M ount R eceptacle A ssem bly, V ertical (Page 28 7 ) H eader, S traight Post (Pages 295 & 296 ) B oard M ount R eceptacles, H orizontal and V ertical S tyles (Pages 28 5 & 28 6 ) H eader, R ight-A ngle Post, Keyed (Page 297 )

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I R eceptacles, B oard M ount, .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. Mod I Receptacles, Board Mount R elated Product D ata R ecom m ended B oard Layout for Type C — page 2 88 M ates w ith — M achine Applied Posts — page 2 94 H eaders — pages 2 95-2 97 Application Tooling — pages 30 0 -30 4 Perform ance Specifications — page 30 5 Technical D ocum ents — page 30 5 R ecom m ended B oard Layout for R eceptacle Assem blies and Individual R eceptacles (Type A and B ) J -R eceptacle centers m ay vary depending on requirem ents. For individual receptacles, m inim um nom inal centerline spacing betw een adjacent receptacles is .150 [3.8 1]; for receptacle assem blies, centerline spacing betw een adjacent TE Instruction S heet 408 -7 411. N ote: D raw ings depict norm al use of the contact in a one or tw o-sided circuit board. W hen using plated thru-holes, refer to TE Engineering R eport ER -001 and TE Instruction S heet 408 -7 411. For solder m ask, see TE Instruction S heet 408 -7 411. Vertical and H orizontal B oard M ount Part N o. 8 61 8 1 -2 U se in Board M ount Receptacles Keying Plug Round H ole (Post Entry Type A or B) Bottom Post Entry Type A Top Post Entry Type B H orizontal Post Entry Type C .093 M ax. [0.99] .093 M ax. [2.36 ] .1 2 5 M ax. [3.18 ] .1 00 M in. [2.54] .1 2 5 M ax. [3.18 ] .1 2 5 M ax. [3.18 ] .300 [7 .6 2] .1 2 5 [3.18 ] J ±.003 [±0.08 ] 2 J ±.003 [±0.08 ] .055 [1.40] M in. .1 2 5±.002 [3.18 ±0.05] .300 [7 .6 2] .300 [7 .6 2] .093 M ax. [0.99] R eceptacle Styles

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I R eceptacles, B oard M ount, .0 31 x .0 62 [0 .79 x 1.57] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. M od I R eceptacles, B oard M ount Board D im ension Standard Pressure H igh Pressure Insertion Type Thickness T F inish Part N os. Part N os. Applicator N o. for Range (R ef. P g. 28 5 ) Strip F orm Loose Piece Strip F orm Loose Piece “U ” F ram e M achine P lating A 8 6 47 7 -2 8 6 48 0-2 —— 46 6 37 6 -1 P lating C (S older R esist) 8 7 7 7 2-2 —— — 46 6 37 6 -1 P lating A 8 7 003-1 8 7 105-1 —— 46 6 37 6 -1 P lating C (S older R esist) 8 7 7 7 4-2 —— — 46 6 37 6 -1 C N otes: 1. A ll strip form parts in packaged quantities of 5,000 each. 2. A ll loose piece parts in packaged quantities of 500 each. M aterial and Finish C opper alloy, plated as follow s: Plating A — S electively plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire contact Plating B — .0 0 0 0 79 [0.002 01 ] m in. tin on entire contact Plating C — (S older R esist) — .00 0 0 30 [0 .0 0 0 76] gold over .000050 [0.0 0 1 2 7] nickel on contact area, .00 0 50 0 [0 .0 1 2 70 ] alum inum on inside area of solder tines; rem ainder of contact unfinished Standard Pressure Receptacle H igh Pressure Receptacle .01 0 [0.25] M ax. .02 0 [0.51] M ax. .2 1 0 [5.33] .2 1 0 [5.33]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I R eceptacle Assem blies, Vertical B oard M ount, .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. Mod I Receptacles, Vertical Board Mount N o. D im ensions Type A Type B of Standard Pressure High Pressure Standard Pressure Pos. AB Plating A Plating B Plating C Plating B Plating A Plating B Plating C 2 .1 56 [3.96 ] .31 2 [7 .92] 8 7 98 4-2 8 7 98 3-2 8 7 98 9-2 8 7 993-2 8 7 98 6 -2 8 7 98 5-2 8 7 990-2 3 .31 2 [7 .92] .468 [11.8 9] 8 7 98 4-3 8 7 98 3-3 8 7 98 9-3 8 7 993-3 8 7 98 6 -3 8 7 98 5-3 8 7 990-3 4 .468 [11.8 9] .62 4 [15.8 5] 8 7 98 4-4 8 7 98 3-4 8 7 98 9-4 8 7 993-4 8 7 98 6 -4 8 7 98 5-4 8 7 990-4 5 .62 4 [15.8 5] .78 0 [19.8 1] 8 7 98 4-5 8 7 98 3-5 8 7 98 9-5 8 7 993-5 8 7 98 6 -5 8 7 98 5-5 8 7 990-5 6 .78 0 [19.8 1] .936 [23.7 7 ] 8 7 98 4-6 8 7 98 3-6 8 7 98 9-6 8 7 993-6 8 7 98 6 -6 8 7 98 5-6 8 7 990-6 7 .936 [23.7 7 ] 1 .092 [27 .7 4] 8 7 98 4-7 8 7 98 3-7 8 7 98 9-7 8 7 993-7 8 7 98 6 -7 8 7 98 5-7 8 7 990-7 8 1 .092 [27 .7 4] 1 .2 48 [31.7 0] 8 7 98 4-8 8 7 98 3-8 8 7 98 9-8 8 7 993-8 8 7 98 6 -8 8 7 98 5-8 8 7 990-8 9 1 .2 48 [31.7 0] 1 .404 [35.6 6 ] 8 7 98 4-9 8 7 98 3-9 8 7 98 9-9 8 7 993-9 8 7 98 6 -9 8 7 98 5-9 8 7 990-9 10 1 .404 [35.6 6 ] 1 .560 [39.6 2] 1-8 7 98 4-0 1-8 7 98 3-0 1-8 7 98 9-0 1-8 7 993-0 1-8 7 98 6 -0 1-8 7 98 5-0 1-8 7 990-0 11 1 .560 [39.6 2 1 .71 6 [43.59] 1-8 7 98 4-1 1-8 7 98 3-1 1-8 7 98 9-1 1-8 7 993-1 1-8 7 98 6 -1 1-8 7 98 5-1 1-8 7 990-1 12 1 .71 6 [43.59] 1 .8 72 [47 .55] 1-8 7 98 4-2 1-8 7 98 3-2 1-8 7 98 9-2 1-8 7 993-2 1-8 7 98 6 -2 1-8 7 98 5-2 1-8 7 990-2 13 1 .8 72 [47 .55] 2 .02 8 [51.51] 1-8 7 98 4-3 1-8 7 98 3-3 1-8 7 98 9-3 1-8 7 993-3 1-8 7 98 6 -3 1-8 7 98 5-3 1-8 7 990-3 14 2 .02 8 [51.51] 2 .1 8 4 [55.47 ] 1-8 7 98 4-4 1-8 7 98 3-4 1-8 7 98 9-4 1-8 7 993-4 1-8 7 98 6 -4 1-8 7 98 5-4 1-8 7 990-4 15 2 .1 8 4 [55.47 ] 2 .340 [59.44] 1-8 7 98 4-5 1-8 7 98 3-5 1-8 7 98 9-5 1-8 7 993-5 1-8 7 98 6 -5 1-8 7 98 5-5 1-8 7 990-5 16 2 .340 [59.44] 2 .496 [6 3.40] 1-8 7 98 4-6 1-8 7 98 3-6 1-8 7 98 9-6 1-8 7 993-6 1-8 7 98 6 -6 1-8 7 98 5-6 1-8 7 990-6 17 2 .496 [6 3.40] 2 .652 [6 7 .36 ] 1-8 7 98 4-7 1-8 7 98 3-7 1-8 7 98 9-7 1-8 7 993-7 1-8 7 98 6 -7 1-8 7 98 5-7 1-8 7 990-7 18 2 .652 [6 7 .36 ] 2 .8 08 [7 1.32] 1-8 7 98 4-8 1-8 7 98 3-8 1-8 7 98 9-8 1-8 7 993-8 1-8 7 98 6 -8 1-8 7 98 5-8 1-8 7 990-8 19 2 .8 08 [7 1.32] 2 .964 [7 5.29] 1-8 7 98 4-9 1-8 7 98 3-9 1-8 7 98 9-9 1-8 7 993-9 1-8 7 98 6 -9 1-8 7 98 5-9 1-8 7 990-9 20 2 .964 [7 5.29] 3.1 2 0 [7 9.25] 2-8 7 98 4-0 2-8 7 98 3-0 2-8 7 98 9-0 2-8 7 993-0 2-8 7 98 6 -0 2-8 7 98 5-0 2-8 7 990-0 Single R ow .156 [3.96] C enterline M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated C ontacts — C opper alloy, plated as follow s: Plating A — S electively plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire contact Plating B — .0 0 0 0 79 [0.002 01 ] m in. tin on entire contact Plating C — (S older R esist) — .00 0 0 30 [0 .0 0 0 76] gold over .000050 [0.0 0 1 2 7] nickel on contact area, .00 0 50 0 [0 .0 1 2 70 ] alum inum on inside area of solder tines; rem ainder of contact unfinished R elated Product D ata R ecom m ended B oard Layout — page 2 88 M ates w ith — M achine Applied Posts — page 2 94 H eaders — pages 2 95-2 97 Perform ance Specifications — page 30 5 Technical D ocum ents — page 30 5 Part N o. 8 61 8 1 -2 (U se in B oard M ount R eceptacles) Post Entry Type A Post Entry Type B Keying Plug X-X X X .1 8 2 [4.6 2] .01 8 [0.46 ] .1 75±.007 [4.45±0.18 ] .300±.003 [7 .6 2±0.08 ] .046 [1.17 ] C ontact A rea B ±.01 5 [±0.38 ] A .1 56 [3.96 ] Typ. The letter A stam ped on contact indicates m ating end of receptacle. .1 1 2 -.000 [2.8 4±0.00] +.01 0 +0.25

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I R eceptacle Assem blies, H orizontal B oard M ount, .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. M od I R eceptacles, H orizontal B oard M ount Single R ow .156 [3.96] C enters M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated C ontacts — C opper alloy, plated as follow s: Plating A — S electively plated .00 0 0 30 [0 .0 0 0 76] gold contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire contact Plating B — .0 0 0 0 79 [0.002 01 ] m in. tin on entire contact R elated Product D ata M ates w ith — M achine Applied Posts — page 2 94 H eaders — pages 2 95-2 97 Perform ance Specifications — page 30 5 Technical D ocum ents — page 30 5 R ecom m ended B oard Layouts for R eceptacle Assem blies and Individual R eceptacles (Type C ) The m ating post length is depicted by the A dim ension on page 294 (m achine applied posts) and the C dim ension on pages 295-297 (headers). H -R eceptacle centers m ay vary depending on requirem ents. For individual receptacles, m inim um nom inal centerline spacing betw een adjacent receptacles is .125 [3.18 ] for receptacle assem blies, centerline spacing betw een adjacent This configuration recom m ended for use w ith m achine applied posts or headers w ith a .500 [12.7 0] m inim um m ating end post length.* This configuration recom m ended for use w ith m achine applied posts or headers w ith a .345 [18 .7 6 ] m inim um m ating end post length.* This configuration recom m ended for use w ith m achine applied posts or headers w ith a .405 [10.29] m inim um m ating end post length.* Post Entry Type C Part N o. 8 61 8 1 -2 (U se in B oard M ount R eceptacles) Keying Plug H ±.003 [±0.08 ] .055±.005 [1.40±0.13] .340 +.005 -.000 ] 2 H ±.003 [±0.08 ] [8 .6 4+0.13] H ±.003 [±0.08 ] .340 +.005 -.000 ] 2 H ±.003 [±0.08 ] [8 .6 4+0.13] H ±.003 [±0.08 ] .073±.003 [1.8 5±0.08 ] Typ. D ia. .1 00 [2.54] M ax. .073±.003 [1.8 5±0.08 ] Typ. D ia. .073±.003 [1.8 5±0.08 ] Typ. D ia. .340 +.005 -.000 ] 2 H ±.003 [±0.08 ] [8 .6 4+0.13] X-X X X .1 8 2 [4.6 2] .1 45 [3.6 8 ] .300±.003 [7 .6 2±0.08 ] .1 75±.007 [4.45±0.18 ] .333±.01 0 [8 .46 ±0.25] .01 8 [0.46 ] .046 [1.17 ] C ontact A rea B ±.01 5 [±0.38 ] A .1 56 [3.96 ] Typ. The letter A stam ped on contact indicates m ating end of recep - tacle.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I R eceptacle Assem blies, H orizontal B oard M ount, .0 31 x .0 62 [0 .79 x 1.57] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. Mod I Receptacles, Horizontal Board Mount N o. of D im ensions Standard Pressure H igh Pressure Pos. AB Plating A Plating B Plating B 2 .1 56 [3.96 ] .31 2 [7 .92] 8 7 98 8 -2 8 7 98 7 -2 8 7 995-2 3 .31 2 [7 .92] .468 [11.8 9] 8 7 98 8 -3 8 7 98 7 -3 8 7 995-3 4 .468 [11.8 9] .62 4 [15.8 5] 8 7 98 8 -4 8 7 98 7 -4 8 7 995-4 5 .62 4 [15.8 5] .78 0 [19.8 1] 8 7 98 8 -5 8 7 98 7 -5 8 7 995-5 6 .78 0 [19.8 1] .936 [23.7 7 ] 8 7 98 8 -6 8 7 98 7 -6 8 7 995-6 7 .936 [23.7 7 ] 1 .092 [27 .7 4] 8 7 98 8 -7 8 7 98 7 -7 8 7 995-7 8 1 .092 [27 .7 4] 1 .2 48 [31.7 0] 8 7 98 8 -8 8 7 98 7 -8 8 7 995-8 9 1 .2 48 [31.7 0] 1 .404 [35.6 6 ] 8 7 98 8 -9 8 7 98 7 -9 8 7 995-9 10 1 .404 [35.6 6 ] 1 .560 [39.6 2] 1-8 7 98 8 -0 1-8 7 98 7 -0 1-8 7 995-0 11 1 .560 [39.6 2] 1 .71 6 [43.59] 1-8 7 98 8 -1 1-8 7 98 7 -1 1-8 7 995-1 12 1 .71 6 [43.59] 1 .8 72 [47 .55] 1-8 7 98 8 -2 1-8 7 98 7 -2 1-8 7 995-2 13 1 .8 72 [47 .54] 2 .02 8 [51.51] 1-8 7 98 8 -3 1-8 7 98 7 -3 1-8 7 995-3 14 2 .02 8 [51.51] 2 .1 8 4 [55.47 ] 1-8 7 98 8 -4 1-8 7 98 7 -4 1-8 7 995-4 15 2 .1 8 4 [55.47 ] 2 .340 [59.44] 1-8 7 98 8 -5 1-8 7 98 7 -5 1-8 7 995-5 16 2 .340 [59.44] 2 .496 [6 3.40] 1-8 7 98 8 -6 1-8 7 98 7 -6 1-8 7 995-6 17 2 .496 [6 3.40] 2 .652 [6 7 .36 ] 1-8 7 98 8 -7 1-8 7 98 7 -7 1-8 7 995-7 18 2 .652 [6 7 .36 ] 2 .8 08 [7 1.32] 1-8 7 98 8 -8 1-8 7 98 7 -8 1-8 7 995-8 19 2 .8 08 [7 1.32] 2 .964 [7 5.29] 1-8 7 98 8 -9 1-8 7 98 7 -9 1-8 7 995-9 20 2 .964 [7 5.29] 3.1 2 0 [7 9.25] 2-8 7 98 8 -0 2-8 7 98 7 -0 2-8 7 995-0

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 M od I R eceptacles, C rim p Snap-In (W ire Applied), .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. M od I R eceptacles, C rim p Snap-In Standard Pressure W ire Size Range Ins. D ia. F inish Strip F orm Loose Piece AW G [m m 2 ] Range Packaged Part Packaged Part Q uantities N os. Q uantities N os. P lating B 5,000 102099-5 500 102103-3 W ire Size Range Applicator (H igh Pressure) Prem ium AW G [m m 2 ] Part U sed W ith CERTI-CRIM P N um ber Type M achine H and Tool Part N um ber 46 6 7 6 4-3 H D M M odel "G " (A M P -O-L EC TR IC ) 2 2 -1 8 [0.3-0.9] 46 6 7 6 4-2 H D M M odel "K " (A M P -O-L EC TR IC ) 9027 4-2 46 6 7 6 4-1 H D M C L S IV + (A M P OM A TOR ) 46 6 937 -1 S C A S tripper-C rim per (A M P -O-M A TIC ) 2 6-2 2 [0.12-0.4] 46 6 7 6 3-2 H D M M odel "K " (A M P -O-L EC TR IC ) 90328 -1 46 6 7 6 3-1 H D M C L S IV + (A M P OM A TOR ) A M P -O-L EC TR IC K II M achine. A pplicators also available for A M P OM A TOR L ead M aking M achines and S tripper/C rim per M achines. C onsult TE. H igh Pressure W ire Size Range Ins. D ia. F inish Strip F orm Loose Piece AW G [m m 2 ] Range Packaged Part Packaged Part Q uantities N os. Q uantities N os. P lating B 5,000 102100-5 500 102104-3 P lating B 5,000 102102-5 500 102106 -3 Applicator (Standard Pressure) Prem ium W ire Size Range Part U sed W ith CERTI-CRIM P AW G [m m 2 ] N um ber Type M achine H and Tool Part N um ber 46 6 7 6 4-3 H D M M odel "G " (A M P -O-L EC TR IC ) 2 2 -1 8 46 6 7 6 4-2 H D M M odel "K " (A M P -O-L EC TR IC ) [0.3-0.9] 46 6 7 6 4-1 H D M C L S IV + (A M P OM A TOR ) 9027 4-2 46 6 937 -1 S C A S tripper-C rim per (A M P -O-M A TIC ) A M P -O-L EC TR IC K II M achine. A pplicators also available for A M P OM A TOR L ead M aking M achines and S tripper/C rim per M achines. C onsult TE. M aterial and Finish C opper alloy, plated as follow s: Plating A — S electively plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire contact Plating B — .0 0 0 0 1 6 [0.0004 1 ] m in. tin on entire contact R elated Product D ata H ousings used in — pages 2 91 -2 93 M ate w ith M achine Applied Posts — page 2 94 H eaders — pages 2 95-2 97 Application Tooling — page 300-304 Perform ance Specification — page 30 5 Technical D ocum ents — page 30 5 .01 4 [0.36 ] M ax. .02 0 [0.51] M ax. .2 1 0 [5.33] .2 1 0 [5.33] H igh Pressure Receptacle Standard Pressure Receptacle E xtraction Tool P art No. 84 34 73-1 P art Instruction S heet 4 0 8-94 51 .1 2 5 [3.18 ] M ax. .093 [2.36 ] M ax. .2 8 0 [7 .11] .58 0 [14.7 3] AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I R eceptacle H ousings, Standard Profile, Unkeyed, .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. Mod I Receptacle Housings N o. of D im ensions H ousing Part N os. Pos. AB L Stam ped 1 U nstam ped 2 21 .1 56 [3.96 ] .31 2 [7 .92] — 2-8 7 025-5 32 .31 2 [7 .92] .468 [11.8 9] — 2-8 7 025-1 43 .468 [11.8 9] .62 4 [15.8 5] — 1-8 7 025-3 54 .62 4 [15.8 5] .78 0 [19.8 1] — 2-8 7 025-3 65 .78 0 [19.8 1] .936 [23.7 7 ] 8 7 025-1 8 7 025-2 76 .936 [23.7 7 ] 1 .092 [27 .7 4] — 3-8 7 025-4 87 1 .092 [27 .7 4] 1 .2 48 [31.7 0] — 1-8 7 025-6 98 1 .2 48 [31.7 0] 1 .404 [35.6 6 ] 8 7 025-9 1-8 7 025-0 10 9 1 .404 [35.6 6 ] 1 .560 [39.6 2] 1-8 7 025-7 1-8 7 025-8 11 10 1 .560 [39.6 2] 1 .71 6 [43.59] — 3-8 7 025-6 12 11 1 .71 6 [43.59] 1 .8 72 [47 .55] 1-8 7 025-1 1-8 7 025-2 13 12 1 .8 72 [47 .55] 2 .02 8 [51.51] — 3-8 7 025-0 14 13 2 .02 8 [51.51] 2 .1 8 4 [55.47 ] — 3-8 7 025-8 15 14 2 .1 8 4 [55.47 ] 2 .340 [59.44] — 3-8 7 025-2 16 15 2 .340 [59.44] 2 .496 [6 3.40] — 2-8 7 025-0 17 16 2 .496 [6 3.40] 2 .652 [6 7 .36 ] — 4-8 7 025-0 18 17 2 .652 [6 7 .36 ] 2 .8 08 [7 1.32] — 8 7 025-4 19 18 2 .8 08 [7 1.32] 2 .964 [7 5.29] — 8 7 025-6 20 19 2 .964 [7 5.29] 3.1 2 0 [7 9.25] — 8 7 025-8 25 24 3.744 [95.10] 3.900 [99.06 ] — 5-8 7 025-0 N otes: 1M arkings on housing. 2N o m arkings on housing. Single R ow , .156 [3.96] C enters, W ithout Strain R elief M aterial B lack therm oplastic, flam e retardant, C ontacts used w ith — page 2 90 M ate w ith — M achine Applied Posts — page 2 94 H eaders — pages 2 95-2 97 Perform ance Specifications — page 30 5 Technical D ocum ents — page 30 5 L ocking L edge Identification Identifiers on ends of housing are optional at A M P ’s discretion .030±.01 0 [0.7 6 ±0.25] .790 [20.07 ] A spaces @ .1 56±.003 = B ±.003 .077 [1.96 ] .1 56 [3.96 ] Typ. .1 2 0 [3.05] Typ. .2 50 [6 .35] M ax. L ±.01 5 [±0.38 ] Y Y Y-Y

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I R eceptacle H ousings, Standard Profile, Unkeyed, .0 31 x .0 62 [0 .79 x 1.57] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. M od I R eceptacle H ousings Single R ow , .156 [3.96] C enters, W ith Strain R elief M aterial B lack therm oplastic, flam e retardant, C ontacts used w ith — page 2 90 M ate w ith — M achine Applied Posts — page 2 94 H eaders — pages 2 95-2 97 Perform ance Specifications — page 30 5 Technical D ocum ents — page 30 5 1 0 Position Receptacle H ousing, Part N o. 1 -1 02 090-0 .992 [25.20] .397 [10.08 ] .446 .2 06±.02 0 [5.23±0.51] .694 [17 .6 3] .8 43 [21.41] .040 [1.02] .2 90 [7 .37 ] .094 [2.39] D ia. 4 P lc. 1 .640 [41.6 6 ] 1 .560 [39.6 2]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I R eceptacle H ousings, Low Profile, Keyed, .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. Mod I Receptacle Housings Keying Plug R eferences W ire Exit Face W ire Exit Face Post M ating Face Post M ating Face Keying Plug M aterial — Natural C olor Nylon Single R ow , .156 [3.96] C enters M aterial B lack therm oplastic, flam e retardant, C ontacts used w ith — page 2 90 M ate w ith — H eaders — pages 2 95-2 97 Perform ance Specifications — page 30 5 Technical D ocum ents — page 30 5 Fits through .1 2 5 [3.18 ] D ia. H ole .050 [1.27 ] .1 60 [4.06 ] Keying P lug 8 71 1 6-2 (Flush) Keying P lug 8 71 1 6-2 (Flush) F or Standard H ousings F or Low Profile H ousings L ocking L edge Identification Identifiers on ends of housing are optional at A M P ’s discretion .030±.01 0 [0.7 6 ±0.25] .640 [16 .26 ] A spaces @ .1 56±.003 = B ±.003 .077 [1.96 ] .040 [1.02] .1 2 5 [3.18 ] .075 [1.91] Typ. .1 56 [3.96 ] Typ. .1 2 0 [3.05] Typ. .2 50 [6 .35] M ax. L ±.01 5 [±0.38 ] N o. of D im ensions N o. of H ousing Part N os. K ey Pos. K eys (U nstam ped) 1 Locations AB L 21 .1 56 [3.96 ] .31 2 [7 .92] 1 8 7 159-3 A 32 .31 2 [7 .92] .468 [11.8 9] 1 8 7 159-4 A 43 .468 [11.8 9] .62 4 [15.8 5] 2 8 7 159-5 A ,C 54 .62 4 [15.8 5] .78 0 [19.8 1] 2 8 7 159-1 A ,D 65 .78 0 [19.8 1] .936 [23.7 7 ] 3 8 7 159-6 A ,C ,E 76 .936 [23.7 7 ] 1 .092 [27 .7 4] 3 8 7 159-7 A ,C ,E 87 1 .092 [27 .7 4] 1 .2 48 [31.7 0] 4 8 7 159-8 A ,C ,E,G 98 1 .2 48 [31.7 0] 1 .404 [35.6 6 ] 3 8 7 159-9 A ,D ,G 10 9 1 .404 [35.6 6 ] 1 .560 [39.6 2] 5 1-8 7 159-0 A ,C ,E,G ,J 11 10 1 .560 [39.6 2] 1 .71 6 [43.59] 4 1-8 7 159-1 A ,D ,G ,K 12 11 1 .71 6 [43.59] 1 .8 72 [47 .55] 6 1-8 7 159-2 A ,C ,E,G ,J,L 13 12 1 .8 72 [47 .55] 2 .02 8 [51.51] 4 8 7 159-2 A ,D ,J,M 14 13 2 .02 8 [51.51] 2 .1 8 4 [55.47 ] 7 1-8 7 159-3 A ,C ,E,G ,J,L ,N 15 14 2 .1 8 4 [55.47 ] 2 .340 [59.44] 5 1-8 7 159-4 A ,D ,G ,K ,N 16 15 2 .340 [59.44] 2 .496 [6 3.40] 8 1-8 7 159-5 A ,C ,E,G ,J,L ,N ,Q 17 16 2 .496 [6 3.40] 2 .652 [6 7 .36 ] 6 1-8 7 159-6 A ,D ,G ,K ,N ,R 18 17 2 .652 [6 7 .36 ] 2 .8 08 [7 1.32] 6 1-8 7 159-7 A ,D ,F ,J,P ,S 19 18 2 .8 08 [7 1.32] 2 .964 [7 5.29] 8 1-8 7 159-8 B ,D ,F ,J,L ,N ,Q ,S 20 19 2 .964 [7 5.29] 3.1 2 0 [7 9.25] 10 1-8 7 159-9 A ,C ,E,G ,J,L ,N ,Q ,S ,U 1N o m arking on housing. Part N o. 8 71 1 6-2

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I Posts, M achine Applied, .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. M od I Posts, M achine Applied D im ensions F inish Part N os. ABC Strip F orm 1 Loose Piece 2 P lating B 508 6 147 -2 508 6 18 2-2 P lating B 508 6 147 -9 508 6 18 2-9 P lating B 3-508 6 147 -7 2-508 6 18 2-5 P lating B 2-508 6 147 -2 2-508 6 18 2-2 P lating B 508 6 147 -1 508 6 18 2-1 P lating B 1-508 6 147 -0 1-508 6 18 2-0 1 Packaging quantity of 20,000 per reel. 2 Packaging quantity of 1,000 per bag. N ote: S trip form posts applied w ith Insertion M achine N o. 3-45738 2 -1 , includes pow er unit and applicator. Typical Assem bly Straight Posts M aterial and Finish B rass, plated .0 0 0 0 30 [0 .00076] gold over .0 0 0 0 50 [0 .0 0 1 2 7] nickel on entire post R elated Product D ata M ate w ith — B oard M ount R eceptacles — pages 2 85, 2 86 B oard M ount R eceptacle Assem blies — pages 2 87-2 89 C rim p Snap-In R eceptacles and H ousings — pages 2 90-2 92 Locking C lip C ontacts & H ousings — pages 2 98, 2 99 (see page 2 98 for recom m ended post length). Application Tooling — pages 30 0 -30 4 Perform ance Specifications — page 30 5 Technical D ocum ents — page 30 5 D — Post centers m ay vary depending on requirem ents. M inim um nom inal centerline spacing betw een adjacent contacts is .125 [3.18 ]; .003 [0.08 ] tolerances not to accum ulate over length of board. E— Post center location from edge of board m ay vary to satisfy application. Recom m ended M ounting H oles .048 [1.22] .08 0 [2.03] .062 [1.57 ] .031 [0.7 8 ] .078 ±.002 [1.98 ±0.05] D ia. (D rilled H ole) .1 50 [3.8 1] .1 50 [3.8 1] C ut Off D ±.003 [±0.08 ] E A B C 2 D ±.003 [±0.08 ]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I H eaders, Straight Post, Keyed, .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. Mod I Headers Single R ow , .156 [3.96] C enters M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated Posts — B rass, plated as follow s: Plating A — S electively plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] m in. nickel on entire post Plating B — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000030 [0.0 0 762 ] nickel on entire post R elated Product D ata M ate w ith — B oard M ount R eceptacles — pages 2 85, 2 86 B oard M ount R eceptacle Assem blies — pages 2 87-2 89 C rim p Snap-In R eceptacles and H ousings — pages 2 90 -2 92 Locking C lip C ontacts & H ousings — pages 2 98 & 2 99 (see page 2 98 for recom m ended post length). Perform ance Specifications — page 30 5 Technical D ocum ents — page 30 5 N o. of D im ensions N o. of Post H eight Post H eight K eyw ay Locations ABC Slots Plating A Plating B Plating A Plating B 21 .1 56 [3.96 ] .2 67 [6 .7 8 ] 1 8 58 29-2 5-8 7 16 0-4 8 7 247 -2 5-8 7 26 2-2 A 32 .31 2 [7 .92] .42 3 [10.7 4] 1 8 58 29-3 5-8 7 16 0-5 8 7 247 -3 5-8 7 26 2-3 A 43 .468 [11.8 9] .579 [14.7 1] 2 8 58 29-4 5-8 7 16 0-6 8 7 247 -4 5-8 7 26 2-4 A ,C 54 .62 4 [15.8 5] .735 [18 .6 7 ] 2 8 58 29-5 5-8 7 16 0-1 8 7 247 -5 5-8 7 26 2-5 A ,D 65 .78 0 [19.8 1] .8 91 [22.6 3] 3 8 58 29-6 5-8 7 16 0-7 8 7 247 -6 5-8 7 26 2-6 A ,C ,E 76 .936 [23.7 7 ] 1 .047 [26 .59] 3 8 58 29-7 5-8 7 16 0-8 8 7 247 -7 5-8 7 26 2-7 A ,C ,E, 87 1 .092 [27 .7 4] 1 .2 03 [30.56 ] 4 8 58 29-8 5-8 7 16 0-9 8 7 247 -8 5-8 7 26 2-8 A ,C ,E,G 98 1 .2 48 [31.7 0] 1 .359 [34.52] 3 8 58 29-9 6 -8 7 16 0-0 8 7 247 -9 5-8 7 26 2-9 A ,D ,G 10 9 1 .404 [35.6 6 ] 1 .51 5 [38 .48 ] 5 1-8 58 29-0 6 -8 7 16 0-1 1-8 7 247 -0 6 -8 7 26 2-0 A ,C ,E,G ,J 11 10 1 .560 [39.6 2] 1 .671 [42.44] 4 1-8 58 29-1 6 -8 7 16 0-2 1-8 7 247 -1 6 -8 7 26 2-1 A ,D ,G ,K 12 11 1 .71 6 [43.59] 1 .8 2 7 [46 .41] 6 1-8 58 29-2 6 -8 7 16 0-3 1-8 7 247 -2 6 -8 7 26 2-2 A ,C ,E,G ,J,L 13 12 1 .8 72 [47 .55] 1 .98 3 [50.37 ] 4 1-8 58 29-3 5-8 7 16 0-2 1-8 7 247 -3 6 -8 7 26 2-3 A ,D ,J,M 14 13 2 .02 8 [51.51] 2 .1 39 [54.33] 7 1-8 58 29-4 6 -8 7 16 0-4 1-8 7 247 -4 6 -8 7 26 2-4 A ,C ,E,G ,J,L ,N 15 14 2 .1 8 4 [55.47 ] 2 .2 95 [58 .29] 5 1-8 58 29-5 6 -8 7 16 0-5 1-8 7 247 -5 6 -8 7 26 2-5 A ,D ,G ,K ,N 16 15 2 .340 [59.44] 2 .451 [6 2.26 ] 8 1-8 58 29-6 6 -8 7 16 0-6 1-8 7 247 -6 6 -8 7 26 2-6 A ,C ,E,G ,J,L ,N ,Q 17 16 2 .496 [6 3.40] 2 .607 [6 6 .22] 6 1-8 58 29-7 6 -8 7 16 0-7 1-8 7 247 -7 6 -8 7 26 2-7 A ,D ,G ,K ,N ,R 18 17 2 .652 [6 7 .36 ] 2 .763 [7 0.18 ] 7 1-8 58 29-8 6 -8 7 16 0-8 1-8 7 247 -8 6 -8 7 26 2-8 A ,D ,F ,J,M ,P ,S 19 18 2 .8 08 [7 1.32] 2 .91 9 [7 4.14] 8 1-8 58 29-9 6 -8 7 16 0-9 1-8 7 247 -9 6 -8 7 26 2-9 B ,D ,F ,J,L ,N ,Q ,S 20 19 2 .964 [7 5.29] 3.075 [7 8 .11] 10 2-8 58 29-0 7 -8 7 16 0-0 2-8 7 247 -0 7 -8 7 26 2-0 A ,C ,E,G ,J,L ,N ,Q ,S ,U 21 20 3.1 2 0 [7 9.25] 3.2 31 [8 2.07 ] 7 2-8 58 29-1 7 -8 7 16 0-1 2-8 7 247 -1 7 -8 7 26 2-1 A ,D ,G ,K ,N ,R ,U 22 21 3.2 76 [8 3.21] 3.38 7 [8 6 .03] 11 2-8 58 29-2 7 -8 7 16 0-2 2-8 7 247 -2 7 -8 7 26 2-2 A ,C ,E,G ,J,L ,N ,Q ,S ,U,W 23 22 3.432 [8 7 .17 ] 3.543 [8 9.99] 8 2-8 58 29-3 7 -8 7 16 0-3 2-8 7 247 -3 7 -8 7 26 2-3 A ,D ,G ,K ,N ,R ,U,X 24 23 3.58 8 [91.14] 3.699 [93.95] 12 2-8 58 29-4 7 -8 7 16 0-4 2-8 7 247 -4 7 -8 7 26 2-4 A ,C ,E,G ,J,L ,N ,Q ,S ,U,W ,Y 25 24 3.744 [95.10] 3.8 55 [97 .92] 11 2-8 58 29-5 7 -8 7 16 0-5 2-8 7 247 -5 7 -8 7 26 2-5 A ,C ,E,H ,K ,M ,Q ,S ,U,W ,Y Recom m ended Board Layout .31 2 ±.003 [7 .92±0.08 ] .1 56±.003 [3.96 ±0.08 ] .1 2 5 [3.18 ] .055±.003 [1.40±0.08 ] D ia. .2 50±.01 0 [6 .35±0.25] S ee chart for locations .2 50±.01 0 [6 .35±0.25] .405±.01 0 [10.29±0.25] C 1 .00 [2.54] Typ. Keyw ay A spaces @ .1 56±.003 = B ±.003 .031 [0.7 9] .062 [1.57 ] .1 2 5±.01 0 [3.18 ±0.25] .031 ±.001 [1.6 0±0.05] .1 2 5 [3.18 ] .035 [0.8 9] .08 5 [2.16 ] M ax. .040-.01 5 [1.02±0.38 ] +.000 +0.00 Typ. K eyw ay Locations (Ref only)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 M od I H eaders, Straight Post, Keyed, .0 31 x .0 62 [0 .79 x 1.57] C enterline (Continued) N ote: A ll part num bers are R oH S com pliant. M od I H eaders N o. of D im ensions N o. of Post H eight Post H eight Post H eight Pos. AB C Slots Plating A Plating B Plating A Plating B Plating A Plating B Locations 21 .1 56 [3.96 ] .2 67 [6 .7 8 ] 1 8 5923-2 5-8 58 7 5-7 8 7 28 3-2 — 8 58 39-2 5-8 58 40-2 A 3 2 .31 2 [7 .92] .42 3 [10.7 4] 1 8 5923-3 5-8 58 7 5-8 8 7 28 3-3 5-8 6 207 -2 8 58 39-3 5-8 58 40-3 A 43 .468 [11.8 9] .579 [14.7 1] 2 8 5923-4 5-8 58 7 5-1 8 7 28 3-4 5-8 6 207 -9 8 58 39-4 5-8 58 40-4 A ,C 54 .62 4 [15.8 5] .735 [18 .6 7 ] 2 8 5923-5 5-8 58 7 5-2 8 7 28 3-5 5-8 6 207 -3 8 58 39-5 5-8 58 40-5 A ,D 6 5 .78 0 [19.8 1] .8 91 [22.6 3] 3 8 5923-6 5-8 58 7 5-9 8 7 28 3-6 — 8 58 39-6 5-8 58 40-6 A ,C ,E 76 .936 [23.7 7 ] 1 .047 [26 .59] 3 8 5923-7 6 -8 58 7 5-0 8 7 28 3-7 — 8 58 39-7 5-8 58 40-7 A ,C ,E, 87 1 .092 [27 .7 4] 1 .2 03 [30.56 ] 4 8 5923-8 6 -8 58 7 5-1 8 7 28 3-8 — 8 58 39-8 5-8 58 40-8 A ,C ,E,G 9 8 1 .2 48 [31.7 0] 1 .359 [34.52] 3 8 5923-9 5-8 58 7 5-3 8 7 28 3-9 — 8 58 39-9 5-8 58 40-9 A ,D ,G 10 9 1 .404 [35.6 6 ] 1 .51 5 [38 .48 ] 5 1-8 5923-0 6 -8 58 7 5-2 1-8 7 28 3-0 — 1-8 58 39-0 6 -8 58 40-0 A ,C ,E,G ,J 11 10 1 .560 [39.6 2] 1 .671 [42.44] 4 1-8 5923-1 6 -8 58 7 5-3 1-8 7 28 3-1 — 1-8 58 39-1 6 -8 58 40-1 A ,D ,G ,K 12 11 1 .71 6 [43.59] 1 .8 2 7 [46 .41] 6 1-8 5923-2 5-8 58 7 5-4 1-8 7 28 3-2 — 1-8 58 39-2 6 -8 58 40-2 A ,C ,E,G ,J,L 13 12 1 .8 72 [47 .55] 1 .98 3 [50.37 ] 4 1-8 5923-3 6 -8 58 7 5-4 1-8 7 28 3-3 — 1-8 58 39-3 6 -8 58 40-3 A ,D ,J,M 14 13 2 .02 8 [51.51] 2 .1 39 [54.33] 7 1-8 5923-4 6 -8 58 7 5-5 1-8 7 28 3-4 — 1-8 58 39-4 6 -8 58 40-4 A ,C ,E,G ,J,L ,N 15 14 2 .1 8 4 [55.47 ] 2 .2 95 [58 .29] 5 1-8 5923-5 6 -8 58 7 5-6 1-8 7 28 3-5 — 1-8 58 39-5 6 -8 58 40-5 A ,D ,G ,K ,N 16 15 2 .340 [59.44] 2 .451 [6 2.26 ] 8 1-8 5923-6 6 -8 58 7 5-7 1-8 7 28 3-6 — 1-8 58 39-6 6 -8 58 40-6 A ,C ,E,G ,J,L ,N ,Q 17 16 2 .496 [6 3.40] 2 .607 [6 6 .22] 6 1-8 5923-7 6 -8 58 7 5-8 1-8 7 28 3-7 — 1-8 58 39-7 6 -8 58 40-7 A ,D ,G ,K ,N ,R 18 17 2 .652 [6 7 .36 ] 2 .763 [7 0.18 ] 7 1-8 5923-8 6 -8 58 7 5-9 1-8 7 28 3-8 — 1-8 58 39-8 6 -8 58 40-8 A ,D ,F ,J,M ,P ,S 19 18 2 .8 08 [7 1.32] 2 .91 9 [7 4.14] 8 1-8 5923-9 7 -8 58 7 5-0 1-8 7 28 3-9 — 1-8 58 39-9 6 -8 58 40-9 B ,D ,F ,J,L ,N ,Q ,S 20 19 2 .964 [7 5.29] 3.075 [7 8 .11] 10 2-8 5923-0 7 -8 58 7 5-1 2-8 7 28 3-0 — 2-8 58 39-0 7 -8 58 40-0 A ,C ,E,G ,J,L ,N ,Q ,S ,U 21 20 3.1 2 0 [7 9.25] 3.2 31 [8 2.07 ] 7 2-8 5923-1 7 -8 58 7 5-2 2-8 7 28 3-1 — 2-8 58 39-1 7 -8 58 40-1 A ,D ,G ,K ,N ,R ,U 22 21 3.2 76 [8 3.21] 3.38 7 [8 6 .03] 11 2-8 5923-2 7 -8 58 7 5-3 2-8 7 28 3-2 — 2-8 58 39-2 7 -8 58 40-2 A ,C ,E,G ,J,L ,N ,Q ,S ,U,W 23 22 3.432 [8 7 .17 ] 3.543 [8 9.99] 8 2-8 5923-3 5-8 58 7 5-5 2-8 7 28 3-3 — 2-8 58 39-3 7 -8 58 40-3 A ,D ,G ,K ,N ,R ,U,X 24 23 3.58 8 [91.14] 3.699 [93.95] 12 2-8 5923-4 7 -8 58 7 5-4 2-8 7 28 3-4 — 2-8 58 39-4 7 -8 58 40-4 A ,C ,E,G ,J,L ,N ,Q ,S ,U,W ,Y 25 24 3.744 [95.10] 3.8 55 [97 .92] 11 2-8 5923-5 7 -8 58 7 5-5 2-8 7 28 3-5 — 2-8 58 39-5 7 -8 58 40-5 A ,C ,E,H ,K ,M ,Q ,S ,U,W ,Y AM PM O D U Interconnection System

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System M od I H eaders, R ight-Angle Post, Keyed, .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. Mod I Headers N o. of D im ensions N o. of Post H eight Post H eight K eyw ay Locations Slots Plating A Plating C Plating B Plating C 21 .1 56 [3.96 ] .2 67 [6 .7 8 ] 1 8 7 6 54-2 5-8 7 6 55-2 8 7 258 -2 5-8 7 194-1 A 32 .31 2 [7 .92] .42 3 [10.7 4] 1 8 7 6 54-3 5-8 7 6 55-3 8 7 258 -3 5-8 7 194-2 A 43 .468 [11.8 9] .579 [14.7 1] 2 8 7 6 54-4 5-8 7 6 55-4 8 7 258 -4 5-8 7 194-3 A ,C 54 .62 4 [15.8 5] .735 [18 .6 7 ] 2 8 7 6 54-5 5-8 7 6 55-5 8 7 258 -5 5-8 7 194-4 A ,D 65 .78 0 [19.8 1] .8 91 [22.6 3] 3 8 7 6 54-6 5-8 7 6 55-6 8 7 258 -6 5-8 7 194-5 A ,C ,E 76 .936 [23.7 7 ] 1 .047 [26 .59] 3 8 7 6 54-7 5-8 7 6 55-7 8 7 258 -7 5-8 7 194-6 A ,C ,E 87 1 .092 [27 .7 4] 1 .2 03 [30.56 ] 4 8 7 6 54-8 5-8 7 6 55-8 8 7 258 -8 5-8 7 194-7 A ,C ,E,G 98 1 .2 48 [31.7 0] 1 .359 [34.52] 3 8 7 6 54-9 5-8 7 6 55-9 8 7 258 -9 5-8 7 194-8 A ,D ,G 10 9 1 .404 [35.6 6 ] 1 .51 5 [38 .48 ] 5 1-8 7 6 54-0 6 -8 7 6 55-0 1-8 7 258 -0 5-8 7 194-9 A ,C ,E,G ,J 11 10 1 .560 [39.6 2] 1 .671 [42.44] 4 1-8 7 6 54-1 6 -8 7 6 55-1 1-8 7 258 -1 6 -8 7 194-0 A ,D ,G ,K 12 11 1 .71 6 [43.59] 1 .8 2 7 [46 .41] 6 1-8 7 6 54-2 6 -8 7 6 55-2 1-8 7 258 -2 6 -8 7 194-1 A ,C ,E,G ,J,L 13 12 1 .8 72 [47 .55] 1 .98 3 [50.37 ] 4 1-8 7 6 54-3 6 -8 7 6 55-3 1-8 7 258 -3 6 -8 7 194-2 A ,D ,J,M 14 13 2 .02 8 [51.51] 2 .1 39 [54.33] 7 1-8 7 6 54-4 6 -8 7 6 55-4 1-8 7 258 -4 6 -8 7 194-3 A ,C ,E,G ,J,L ,N , 15 14 2 .1 8 4 [55.47 ] 2 .2 95 [58 .29] 5 1-8 7 6 54-5 6 -8 7 6 55-5 1-8 7 258 -5 6 -8 7 194-4 A ,D ,G ,K ,N 16 15 2 .340 [59.44] 2 .451 [6 2.26 ] 8 1-8 7 6 54-6 6 -8 7 6 55-6 1-8 7 258 -6 6 -8 7 194-5 A ,C ,E,G ,J,L ,N ,Q 17 16 2 .496 [6 3.40] 2 .607 [6 6 .22] 6 1-8 7 6 54-7 6 -8 7 6 55-7 1-8 7 258 -7 6 -8 7 194-6 A ,D ,G ,K ,N ,R 18 17 2 .652 [6 7 .36 ] 2 .763 [7 0.18 ] 7 1-8 7 6 54-8 6 -8 7 6 55-8 1-8 7 258 -8 6 -8 7 194-7 A ,D ,F ,J,M ,P ,S 19 18 2 .8 08 [7 1.32] 2 .91 9 [7 4.14] 8 1-8 7 6 54-9 6 -8 7 6 55-9 1-8 7 258 -9 6 -8 7 194-8 B ,D ,F ,J,L ,N ,Q ,S 20 19 2 .964 [7 5.29] 3.075 [7 8 .11] 10 2-8 7 6 54-0 7 -8 7 6 55-0 2-8 7 258 -0 6 -8 7 194-9 A ,C ,E,G ,J,L ,N ,Q ,S ,U 21 20 3.1 2 0 [7 9.25] 3.2 31 [8 2.07 ] 7 2-8 7 6 54-1 7 -8 7 6 55-1 2-8 7 258 -1 7 -8 7 194-0 A ,D ,G ,K ,N ,R ,U 22 21 3.2 76 [8 3.21] 3.38 7 [8 6 .03] 11 2-8 7 6 54-2 7 -8 7 6 55-2 2-8 7 258 -2 7 -8 7 194-1 A ,C ,E,G ,J,L ,N ,Q ,S ,U,W 23 22 3.432 [8 7 .17 ] 3.543 [8 9.99] 8 2-8 7 6 54-3 7 -8 7 6 55-3 2-8 7 258 -3 7 -8 7 194-2 A ,D ,G ,K ,N ,R ,U,X 24 23 3.58 8 [91.14] 3.699 [93.95] 12 2-8 7 6 54-4 7 -8 7 6 55-4 2-8 7 258 -4 7 -8 7 194-3 A ,C ,E,G ,J,L ,N ,Q ,S ,U,W ,Y 25 24 3.744 [95.10] 3.8 55 [97 .92] 11 2-8 7 6 54-5 7 -8 7 6 55-5 2-8 7 258 -5 7 -8 7 194-4 A ,C ,E,H ,K ,M ,Q ,S ,U,W ,Y Single R ow , .156 [3.96] C enters M aterial and Finish H ousing — B lack therm oplastic, 94 V-0 rated Posts — B rass, plated as follow s: Plating A — S electively plated .00 0 0 30 [0 .0 0 0 76] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire post Plating B — .0 0 0 0 1 5 [0.00038] gold over .0 0 0 0 50 [0 .0 0 1 2 7] nickel on entire post Plating C — .0 0 0 1 0 0 -.0002 00 [0.0 0 2 54 -0 .0 0 50 8] tin over .000050 [0.0 0 1 2 7] nickel on entire post R elated Product D ata M ate w ith — B oard M ount R eceptacles — pages 2 85, 2 86 B oard M ount R eceptacle Assem blies — pages 2 87-2 89 C rim p Snap-In R eceptacles and H ousings — pages 2 90 -2 92 Locking C lip C ontacts and H ousings — pages 2 98 & 2 99 (see page 2 98 for recom m ended post length). Perform ance Specifications — page 30 5 Technical D ocum ents — page 30 5 E D im ension .345 [8.76] Post H eight — .2 50 [6.35] for m ounting header flush w ith board edge; .595 [1 5.1 1 ] for supporting m ating connector on board. .50 0 [12 .70 ] Post H eight — .2 50 [6.35] for m ounting header flush w ith board edge; .750 [1 9.05] for supporting m ating connector on board. Recom m ended Board Layout .31 2 ±.003 [3.96 ±0.08 ] E .078 ±.002 [1.98 ±0.05] D ia. K eyw ay Locations (Ref O nly) C .031 ±.001 [0.7 9±0.03] Typ. .040-.01 5 2 P lc. [1.02-0.38 ] .031 [0.7 9] S ee Table for L ocations .1 31 [3.33] .1 2 5 [3.18 ] .1 2 5±.01 0 [3.18 ±0.25] .2 50±.01 0 [6 .35±0.25] .062 ±.001 [1.57 ±0.03] .345±.01 0 [8 .7 6 ±0.25] .2 75±.01 5 [6 .99±0.38 ] A S paces @ 1 .56 = B[3.96 ] .1 00 [2.54] Typ. Keyw ay +.000 +0.00

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Locking C lip C ontacts for .0 31 x .0 62 [0 .79 x 1.57] Posts, .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. Locking C lip C ontacts W ire H arnessing If necessary, w ires can be grouped w ith cable ties and secured to a panel w ith fixed clam ps. How ever, locking clip contacts m ust be free to float w ithin the connector housings to allow proper extraction. Therefore, harnessing hardw are or the use of m ultiple term inations per contact m ust not restrict the free-floating action of contacts in the housing. F or m ore inform ation, request Insulating and B undling Products C atalog 1 241 3 2. W ire C rim p C ontacts w ith Insulation Support M aterial and Finish C ontact B ody — P hosphor bronze, plated as follow s: Plating A — S electively plated .00 0 0 1 5 [0 .0 0 0 38] gold on contact area, w ith gold flash over .0 0 0050 [0.001 2 7] nickel on entire post Plating B — .0 0 0 1 0 0 [0.002 54 ] m in. tin over .0 0 0 0 50 [0 .0 0 1 2 7] nickel on entire contact C ontact Spring — S tainless steel R elated Product D ata M ate w ith — M achine Applied Posts — page 2 94 H eaders (.50 0 Post H eight Only) — pages 2 95-2 97 (see recom m ended post length below )* H ousings used in — page 2 99 Application Tooling — pages 30 0 -30 4 Perform ance Specification — page 305 Technical D ocum ents — page 30 5 Extraction Tool Part N o. 91 1 04-1 Instruction Sheet 4 0 8-7678 W ire Size Ins. D ia. Contact Part N os. Range Range F inish Strip F orm Loose Piece AW G [m m 2 ] P lating B 5-8 7 26 9-1 5-8 7 27 8 -1 W ire Size Applicator Prem ium Range Part U sed W ith CERTI-CRIM P AW G [m m 2 ] N um ber Type M achine H and Tool Part N um ber 2 2 -1 8 [0.3-0.9] 46 6 007 -2 H D M M odel "K " (A M P -O-L EC TR IC ) 1 90308 -1 46 6 950-2 S C A S tripper/C rim per (A M P -O-M A TIC ) C able Tie Fixed C lam p M ating Post S pring B ody U nrestricted W ire for Free-Floating C ontacts 1A M P -O-L EC TR IC K II M achine. A pplicators also available for A M P OM A TOR L ead M aking M achines. C onsult TE. N ote: These contacts m ust be crim ped in accordance w ith TE S pecification N o. 114-25008 in order to function properly in a connector housing. Extraction Tool Part N o. 91 1 04-1 is used for rem oving individual contacts from connector housings and for detaching contacts from m ating posts. If post is longer than m axim um specified, post tip m ay butt against w ire ends. (w ithout housing) (w ith housing)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Locking C lip C onnector H ousings, .0 31 x .0 62 [0 .79 x 1.57] C enterline N ote: A ll part num bers are R oH S com pliant. Locking Clip Connector Housing N o. of D im ensions H ousing Part N os. K eyed Positions Pos. ABC U nK eyed K eyed on M ating F ace 4 8 7 27 0-4 —— 5 1-8 7 27 0-4 —— 6 8 7 27 0-5 —— 7 1-8 7 27 0-5 —— IIndicates "closed cavity". N o post entry hole in this position. N otes: 1. A ll housings listed above w ill accept L ocking C lip C ontacts N o. 8 7 26 9 and 8 7 27 8 , refer to page 298 2. R efer to TE Instruction S heet 408 -7 6 7 6 for proper contact orientation w ithin the housings. Single R ow , .156 [3.96] C enters M aterial and Finish B lack therm oplastic, 94 V-0 rated R elated Product D ata C ontacts used w ith — page 2 98 M ate w ith — M achine Applied Posts — page 2 94 H eaders — pages 2 95-2 97 (see page 2 98 for recom m ended post length) Perform ance Specifications — page 30 5 Technical D ocum ents — page 30 5 C A B .8 60 [21.8 4] .2 2 0 [5.59] .060 [1.52] .031 x .062 [0.7 9 x 1.57 ] Post (R ef only) .433/.370 [11.00/9.40] .1 94 [4.93] .1 1 0 [2.7 9] Typ. .1 56 [3.96 ] Typ. .1 1 0 [2.7 9] M in. Typ.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling N ote: A ll part num bers are R oH S com pliant. Application Tooling For C rim p Snap-In R eceptacles and Locking C lip C ontacts N ote: For additional tooling options, contact TE or reference the TE w eb site. Side-Feed H eavy-D uty M iniature Applicators (C oded H D M ) Interchangeable applicators for crim ping products reeled side-by-side on single or dual carrier strips (prim arily closed-barrel term inals and open-barrel contacts). Sim ilar design as the end- feed version. A ll side-feed applicators include a w ire stop to help correctly position the w ire end in the crim ping target area. For m ore inform ation, request Instruction S heet 40 8-80 40 . AM P-O-LE C TR IC M odel “G” Term inating M achines, Sem iautom atic bench m achines for crim ping reeled term inals and contacts, featuring a quiet and reliable direct m otor drive, m icroprocessor controls for ease of setup and operation, and guarding and lighting designed for operator convenience and safety. A ll m odels are equipped w ith either m anual or autom atic precision adjustm ent of crim p height. M achine-m ounted sensors are available for crim p quality m onitoring using conventional m iniature-style applicators. Specifications W idth — 1 8.7-2 5.3 [4 75-64 3] depending on applicator type D epth — 2 1 .5-2 8.1 [54 6-71 3] depending on applicator type H eight — 2 0 [508] W eight — 2 4 0 lb [1 1 0 kg] E lectrical — 1 2 0 or 2 2 0 VA C , 50 or 60 H z; 31 0 VA Air — 90-1 1 0 psi [6.2 1 -7.59 bar], 6 scfm [0.002 82 m 3/s] w hen required w ith air-feed applicators W ire R ange — 2 6-1 0 A W G [0.1 2 -6 m m 2 ] solid or stranded, depending on product applied For m ore inform ation, request C atalog 6582 8 , Video 198116 , C atalog 82 2 75 [C rim p Q uality M onitor (C Q M )], Video 1980 94. AM POM ATOR C LS IV+ Lead-M aking M achines, 35650 0 -1, -2 , 12 1340 0 -1, -2 F ully-autom atic m achines that m easure, cut, strip and term inate single leads. M icroprocessor-controlled, and program m ed and operated using an easy-to- follow, m enu-driven touchscreen. F eatures include direct-drive term inating units w ith precision crim p height adjustm ent, fully program m able setups, w ire runout and splice detection, and m otorized pre-feed w ith w ire straightener. C rim p quality m onitoring is also available. Specifications W idth — 1 59 [4 04 0] D epth — 68 [1 730] H eight — 86 [2 1 85] w ith 2 4 [61 0] dia. reel W eight — 2 000 lb [907 kg] E lectrical — 2 2 0 VA C , 50 or

60 H z, single phase , 2 5 A , w ith

Air — 90 psi [6.2 1 bar], 1 5 scfm [0.0071 m 3/s] sustained W ire R ange — 2 6-1 0 A W G [0.1 2 -6 m m 2 ] stranded, 2 6-1 6 A W G [0.1 2 -1 .4 m m 2 ] solid Lead Lengths — 3-90 [76.2 -2 2 85], 90-1 000 [2 2 85-2 5 4 00] w ith long lead conveyors For m ore inform ation, request C atalog 12 432 4 , Video 198142 (N TS C ) , 19960 9 (PA L ).

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling (Continued) Application Tooling Stripper-C rim per Applicators (coded SC A) Interchangeable applicators for crim ping products in A M P-O -M A TIC Stripper- C rim per M achines. C onsist of separate ram and low er tooling assem blies. Sim ilar dial-in settings for different w ire sizes and insulation diam eters as HD M applicators. A vailable w ith sensors for use w ith the C rim p Q uality M onitor. For m ore inform ation, request C atalog 650 0 4 (AM P-O-M ATIC Stripper-C rim per M achines) , C atalog 82 2 75 [C rim p Q uality M onitor (C Q M )] . Kappa 2 35, Autom atic C ut and Strip, 3-547178-1 The Kappa 23 5 has the capability of processing w ires w ith a cross section of up to 4 A W G and an outside diam eter of 0 .59 inch. O ptions include an inner conductor processing kit for m ulticonductor cables and a flat ribbon cable kit. Specifications W idth — 2 5 [630] D epth — 1 6 [4 90] H eight — 1 3.4 [370] W eight — 95 lb [4 4 kg] W ire C ross-Sections — 2 4 -4 A W G [0.2 2 -2 5 m m 2 ] Flat R ibbon C ables — w idth up to 4 0m m Length R ange — 0.04 ”-32 8ft E lectrical — 1 1 0/2 30 V - 50/60H z, sw itches autom atically AM P-O-M ATIC Stripper- C rim per M achines, 8540 40 -3, -4 Sem iautom atic bench crim ping m achines that also strip the w ire, and are therefore used for term inating jacketed cable. F eature m anual precision adjustm ent of crim p height, keyed strip blades for faster, m ore accurate setups, and an efficient scrap rem oval system . A ll adjustm ents can be m ade from the front of the m achines w ithout special tools. A vailable w ith crim p quality m onitoring. Specifications W idth — 1 4 [355] D epth — 1 8 [4 57] H eight — 33 [838] w ithout reel W eight — 1 50 lb [68 kg] E lectrical — 1 2 0 VA C , 50 or 60 H z, .5 A Air — 80-1 00 psi [5.52 -6.90 bar], 3.5 scfm [0.001 65 m 3/s] W ire R ange — 32 -1 4 A W G [0.03-2 m m 2 ] For m ore inform ation, request C atalog 650 0 4 , Video 1980 75, C atalog 82 2 75 [C rim p Q uality M onitor (C Q M )], Video 1980 94. For C rim p Snap-In R eceptacles and Locking C lip C ontacts (Continued) C osm ic 92 7R M icro-C able Stripper The C osm ic 927R M icro-C able Stripper w as developed to reliably strip various insulation m aterials and m icro-cable. F rom conductor diam eter 3 6 A W G to 1 0 A W G , the stripping diam eter display can be set to w ithin 0 .1 m m increm ents. Thus optim al stripping quality is guaranteed and dam age to the conductor is elim inated. N ote: A ll part num bers are R oH S com pliant. N ote: For additional tooling options, contact TE or reference the TE w eb site.

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling (Continued) Application Tooling N ote: For additional tooling options, contact TE or reference the TE w eb site. A ll C E RTI-C RIM P head assem blies / dies, have m ultiple pow er options available. The accom panying diagram outlines those pow er options. See catalogs 1 65471 4 (SD E E lectric Term inator), 1 2420 8 (626 Pneum atic Tool System ) and 1 773 3 81 (B attery-Pow ered C rim p Tool Kits) for m ore inform ation. For m ore inform ation, request C atalog 65780 . C E R TI-C R IM P Straight Action H and Tools (SAH T) Prem ium grade hand tools. F eature ratchet control to provide com plete crim p cycle. D ie sets close in a straight line. Include a contact locator and w ire stop, plus an insulation crim p adjustm ent lever, w hen applicable. A pproxim ate w eight 1 .3 lb [0 .59 kg] A ll PRO -C RIM PE R head assem blies / dies, have m ultiple pow er options available. The accom panying diagram outlines those pow er options. See catalogs 1 65471 4 (SD E E lectric Term inator), 1 2420 8 (626 Pneum atic Tool System ) and 1 773 3 81 (B attery-Pow ered C rim p Tool Kits) for m ore inform ation. Instruction Sheet 4 08-9930 PR O-C R IM PE R III H and Tool C om m ercial grade hand tool for crim ping various products. F eatures ratchet control to provide com plete crim p cycle. A ccepts both pinned- and shouldered- style die sets. Locators are provided w ith pinned-style die sets for proper contact and w ire positioning, and to help m inim ize contact rotation and bending during crim ping. A pproxim ate w eight 1 .3 lb [0 .60 kg]. For C rim p Snap-In R eceptacles and Locking C lip C ontacts (Continued)

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling (Continued) Application Tooling N ote: A ll part num bers are R oH S com pliant. N ote: For additional tooling options, contact TE or reference the TE w eb site. For B oard M ount R eceptacles and M achine Applied Posts B ench m achines for insert - ing a variety of products into pc boards. U ses the sam e interchangeable insertion heads as the C om p-U -Sertor II M achines. Series 21 760 0 m achines feature a m anually-operated X-Y positioning fixture, plus a locator spotlight. The m achine cycles w hen the board hole is placed on the anvil and both triggers on the dual handles attached to the X-Y fixture are depressed. Series 662820 m achines, w ithout board fixturing, cycle autom atically w hen the hole is properly located. A stabilizing disk over the anvil helps keep the board level. This benchtop insertion m achine installs contacts into PC boards at rates to 20 0 0 per hour. A spotlight highlights the insertion area, and low er tooling assures precise board location. The m achine is activated by a foot pedal. Specifications W idth — 1 8 [4 57] D epth — 2 4 [61 0] H eight — 1 8 [4 57] W eight — 2 50 lb [1 1 3 kg] E lectrical — 1 2 0 to 2 2 0 VA C , 50 or 60 H z (2 1 7600); 1 2 0 or 2 4 0 VA C , 60 H z, single phase, 1 2 0 VA (662 82 0) Air — 80 psi [5.52 bar] m in., 1 5 scfm [0.00708 m 3/s] m in. Insertable Area — 1 8 x 2 2 [4 57 x 559] m ax. For m ore inform ation, request C atalog 2 960 59 . M odular Insertion System (M IS) B ench M achines, 2 1760 0 Series, 662 82 0 Series (show n) F or Board M ount Receptacles A utom atic m achine for inserting a variety of con - tacts into pc boards (PC B s). E quipped w ith an insertion tool (com prised of a prod - uct-specific insertion head, an anvil, and a product feed m echanism ). Stepper-m otor driven X-Y table positions PC B s under insertion head. Surface M ount E quipm ent M anufacturers A ssociation (SM E M A ) com patible inline PC B Insertion Station for posts, tabs, receptacles or sockets. Stand-alone unit is field upgradeable to Pass Through. M ounts up to four TE pneum atic insertion heads. M odem diagnostics standard, vision system optional. C ontrol panel used to program and m onitor entire insertion process. Specifications W idth — 57.5 [1 4 60] D epth — 64 .5 [1 64 0] H eight — 60 [1 52 0] W eight — D epending on configuration E lectrical — 1 1 0 V, 60 H z Air — 87 psi [6 bar] Insertable Area — 2 4 x 1 6 [600 x 4 00] For m ore inform ation, contact TE. P30 0 Autom atic Insertion M achine

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Application Tooling (Continued) Application Tooling For B oard M ount R eceptacles and M achine Applied Posts (Continued) P350 Pin Insertion M achine The P3 50 is a fully autom atic inline pin insertion m achine capable of applying reeled pins, tabs, receptacles and sim ilar products into PC B s. W ith inline operation, an autom atic tool changer and insertion rates up to 5 per second, it is focused at fully autom atic high speed operation to m axim ize throughput w hile m inim izing costly scrap. A servo pow ered XY table positions the PC B under a central drive station at high speed. The tool changer can hold up to 3 insertion heads each capable of applying a different product. A unique rotary insertion finger allow s the application of products at up to 7 different angles w ithout rotating the PC B . This allow s the P3 50 to apply product at different angles w ithout a reduction in insertion rate or the potential positioning error associated w ith PC B rotation. Icon driven softw are w ith touch screen provides a sim ple to use, intuitive operator interface. The P3 50 provides a w ide range of solutions for pin insertion applications. Q uick change tooling packs, and a w ide range of options m ake it a flexible high speed platform . Specifications W idth — 1 02 [2 600] D epth — 1 1 8 [3000] H eight — 87 [2 2 00] W eight — approx 3500 lb [1 600 kg] E lectrical — 2 30 V, 50-60 H z, 1 0 A Air — 600 kP a dried air M ax. B oard Size — 1 7.5 x 1 7.5 [4 50 x 4 50]

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Perform ance Specifications N ote: A ll part num bers are R oH S com pliant. Product Specifications M echanical C haracteristics C ontact D urability Receptacles Locking Plating Standard H igh Clip Pressure Pressure Contacts .00001 6 [0.00041] M in. Tin 7 5 C ycles 25 C ycles N /A .000079 [0.00201] M in. Tin 7 5 C ycles 25 C ycles N /A .0001 00 [0.00254] M in. Tin N /A N /A 25 C ycles .00001 5 [0.00038 ] G old 7 5 C ycles 50 C ycles 25 C ycles .000030 [0.0007 6 ] G old 200 C ycles 100 C ycles N /A C onnector D urability Receptacles M ating – 16 oz. [4.45N ] m ax. per contact after 3 m ating cycles (standard pressure) –30 oz. [8 .34N ] m ax. per contact after 3 m ating cycles (high pressure, gold) –6 0 oz. [16 .6 8 N ] m ax. per contact after 3 m ating cycles (high pressure, tin) U nm ating – 1 oz. [0.28 N ] m in. per contact after 3 m ating cycles (standard pressure) 3 oz. [0.8 3N ] m in. per contact after 3 m ating cycles (high pressure) Locking Clip Contacts M ating – 4 lb. [17 .7 9N ] m ax. per contact after 3 m ating cycles U nm ating – 2 lb. [8 .90N ] m in. per contact after 3 m ating cycles E nvironm ental C haracteristics Operating Tem perature — -65°C to 1 0 5°C [-85°F to 2 2 1 °F] (G old P lated) -65°C to 60 °C [-85°F to 1 4 0 °F] (Tin P lated) The electrical, m echanical and environm ental charac - teristics of the A M PM O D U .0 3 1 x .0 62 [0 .79 x 1 .57] Interconnection System are listed below : E lectrical C haracteristics C ontact C urrent R ating — 5 am peres m ax. for single contact in free air, could vary due to am bient tem pera - ture, w ire size and duty cycles. C ontact R esistance — 1 2 m illiohm s at 1 00 m a and 50 m v open circuit. D ielectric R ating — A t S ea L evel – 1 2 00 VA C betw een con - tacts on .1 56 [3.96] centers for 1 m inute. Insulation R esistance — 5 x 1 0 3 m egohm s (initial) Various technical docu - m ents are available for your use: Product Specifications describe technical perform - ance characteristics and verification tests. They are intended for the D esign, C om ponent and Q uality E ngineer. 10 8-2 50 16 Interconnection S ystem , S tandard P ressure 10 8-2 50 2 5 Interconnection S ystem , High P ressure, G old 10 8-2 50 2 5-1 Interconnection S ystem , High P ressure, Tin 10 8-360 2 9 L ocking C lip C onnectors Application Specifications describe requirem ents for using the product in its intended application and/or crim ping inform ation. They are intended for the Packaging and D esign E ngineer and the M achine Setup Person. 114-2 50 0 0 C rim p S nap-In R eceptacle C ontacts 114-2 50 0 4 B oard M ount R eceptacle C ontacts 114-2 50 0 8 L ocking C lip C ontacts 114-2 50 11 M achine A pplied S traight P osts Instruction Sheets provide instructions for assem bling or applying the product. They are intended for the M anufacturing A ssem bler or O perator. 40 8-730 8 C linching P rocedures for Header A ssem blies 40 8-7411 S uggestions for W ave S oldering A M P M O D U R eceptacles 40 8-7594 T E Hand Tool 90 2 74 -2 for C rim ping C rim p S nap-In 1 8-2 2 A W G C ontacts 40 8-7750 T E Hand Tool 90 32 8-1 for C rim ping C rim p S nap-In C ontacts (2 2 -2 6 A W G ) 40 8-7676 A M P M OD U L ocking C lip C onnectors and C ontacts 40 8-7671 T E Hand Tool 90 30 8-1 for C rim ping L ocking C lip C ontacts 40 8-7678 T E E xtraction Tool 91 1 0 4 -1 for L ocking C lip C ontacts 40 8-7981 C linching P rocedures for R eceptacle A ssem blies 40 8-9451 T E E xtraction Tool 84 34 73-1 for C rim p S nap-In R eceptacles Technical D ocum ents

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Shunts Shunts TE offers a variety of high quality shunts for low cost m anual program m ing. TE 760 0 Series Program m able Shunts are designed on the standard .1 0 0 x .3 0 0 [2.54 x 7.62] D IP spacing. TE D IP Shunts are a highly reliable, low cost m eans of m anually program m ing various types of electrical/electronic equipm ent. The shunt consists of a series of conductive straps packaged in a D IP configuration. The straps can be retained intact for a closed circuit or broken w ith a hand tool to produce an open circuit. TE Post Shunts m ate w ith any com m on pairs of square, rectangular and round posts. Post shunts com e in tw o-position low profile, 2 m m m iniature, tandem spring, dual beam , and m ultiposition versions. A m ong the options available are choices of gold or tin plating, beryllium copper or phosphor bronze contact m aterial and shunts w ith 94V-0 rated housing spaces on .0 79 [2.0 0 ], centers w ith the low profile series requiring only .250 [6.3 5] clearance from the pc board. A ll TE shunts feature one- piece construction for high reliability. A ll have high norm al forces for excellent electrical continuity. F or added reliability, Tandem Spring and D ual B eam Shunts have tw o points of contact in each receptacle. Product Facts I 760 0 Series Program m able Shunts use conventional .10 0 x .30 0 [2 .54x7.62 ] D IP leg spacing I Post Shunts are used to com m on pairs of .0 2 5 [0 .64] square posts, .0 2 5 [0 .64] diam eter round posts and .0 2 2 x .0 2 6 [0 .56 x 0 .66] form ed posts

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Shunts D ual In-Line Package (D IP) Shunts — 760 0 Series N ote: A ll part num bers are R oH S com pliant. Standard Shunt Standard Pressure M aterial and Finish H ousing — G lass-filled polyester, UL C ontacts — B rass Finish — S electively plated .0001 00 m in. tin on solder area over .000050 m in. nickel on entire contact C ontact Lead Spacing — .1 0 0 x .30 0 [2 .54 x7.62 ] Lead Length — .1 4 0 [3.56] below m ounting surface H ousing C olor — B lack Program m ing Tool — S ee below Program m ing H and Tool P art No. 4 35862 -1 This tool provides a reliable m eans of program m ing D IP shunts. It is rugged, light-w eight and dependable. No special skills are required to use this tool. .290 [7.37] 15° Max. Typ. .079 [2.01] 41582B IL p.17A .300 [7.62 ] ± .005 ± 0.13 .100 [2.54 ] ± .005 ± 0.13 .035 [0.89 ] ± .005 ± 0.13 41582B IL p.17B Typ. Dia. Typ. N o. of D im ension A Standard Shunt Pos. inch m m Standard Pressure 4 .400 10.16 18 25190-4 6 .6 00 15.24 18 25190-6 7 .7 00 17 .7 8 18 25190-7 8 .8 00 20.32 18 25190-8 9 .900 22.8 6 18 25190-9 10 1.000 25.40 1-18 25190-0 12 1.200 30.48 1-18 25190-2

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Post Shunts N ote: A ll part num bers are R oH S com pliant. Shunts Part N um bers Configuration H ousing G old Plate 1 G old Plate 1 Tin Plate Color .00001 5 .000030 .0001 00 S trip of 10 B lack 531230-2 531230-3 531230-1 1In contact area Product Facts I One-piece contact construction I H igh norm al forces I 94V-0 rated housings I Gold inlay, gold plate or tin plate over nickel I Stackable I Those post shunts indicated are recognized under the com ponent program of Underw riters Laboratories Inc., File N o. E 2 8476 and certified by the C anadian Standards Association File N o. LR 7189 Tandem Spring Shunts I Tw o points of contact provide extra reliability I Shunts accept posts as short as .175 [4.45]; posts bottom at .330 [8.38] 2 m m M ini Shunts I Stackable on 2 m m contact centerline I Low profile I Available in strips of 10 M aterial and Finish — Low Profile and 2 m m Shunts H ousing — G lass-filled therm oplastic, black, UL 94 V-0 rated C ontacts — B eryllium copper or phosphor bronze, plated .000050 [0.0 0 1 2 7] nickel underplate w ith gold plate in contact area or tin overall M aterial and Finish — Tandem Spring Shunts H ousing — Nylon, UL 94 V-0 rated C ontacts — P hosphor B ronze Finish — .0 0 0 0 30 [0 .0 0 076] nickel underplate w ith gold inlay in the contact area or tin overall Standard H ousing Shunt .2 0 0 [5.0 8] C enterline Part N um bers Configuration H ousing G old Plate 1 G old F lash 1 Tin Plate G old Plate Color .00001 5 .000005 .0001 00 .000030 S trip of 10 B lue 38 28 11-2 —— — S trip of 10 B lack 38 28 11-6 38 28 11-8 38 28 11-5 2-38 28 11-0 S trip of 10 R ed 38 28 11-9 —— — L oose P iece B lack 1-38 28 11-6 1-38 28 11-8 —— 1In contact area 2 .498 [6 3.45] 3.453 [8 7 .7 0] R R R R 2 -Position, Low Profile Shunts E conom y Shunt .10 0 [2 .54] C enterline

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Post Shunts (Continued) N ote: A ll part num bers are R oH S com pliant. Shunts Part N um bers Configuration H ousing G old Plate 1 G old Plate 1 Color .00001 5 .000030 S trip of 10 B lack 38 257 5-2 38 257 5-3 1In contact area 2 -Position, Low Profile Shunts (N ovo) (Continued) H andle Shunt .10 0 [2 .54] C enterline 2 m m M ini-Shunt .0 79 [2 .0 0 ] C enterline D ual B eam Shunt Loose Piece Part N um bers H ousing G old Plate 1 G old Plate 1 G old Plate 1 Tin Plate Type Color .00001 5 .000030 .000050 .0001 00 B lack 8 8 1545-1 8 8 1545-2 8 8 1545-3 4-8 8 1545-2 Open Top B lack 8 8 058 4-1 8 8 058 4-2 8 8 058 4-3 8 8 058 4-4 C losed Top 1In contact area Part N um bers Configuration H ousing G old Plate 1 G old Plate 1 Type Color .00001 5 .000030 S trip of 10 B lack 39008 8 -2 39008 8 -1 Open Top S trip of 10 B lue 39008 8 -4 39008 8 -3 Open Top S trip of 10 Y ellow — 39008 8 -5 Open Top 1In contact area .096 [2.44] 2 .500 [6 3.5] R ef. .1 96 [4.98 ] R ef. .2 47 [6 .27 ] R ef. R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Post Shunts (Continued) N ote: A ll part num bers are R oH S com pliant. Shunts Tandem Spring Shunt .10 0 [2 .54] C enterline M ultiposition Shunts for.0 2 5 [0 .64] Square Posts .2 0 0 [5.0 8] C enterline Part N um bers H ousing G old Inlay 1 TinPlate Color .000030 .0001 00 B lack 530153-2 4-530153-1 1In contact area H ousing — G lass-filled polyester C ontacts — B eryllium C opper Finish — .0 0 0 0 30 [.0 0 0 76] gold in contact area over .0 0 0 0 50 [.001 2 7] nickel on entire contact C urrent R ating — 2 .5 am ps D im ension A H ousing Part Size inch m m Color N um ber 2x2 .246 6 .25 B lack 390102-1 2x2 .246 6 .25 R ed 390102-3 2x3 .396 10.01 B lack 390102-2 .2 50 [6 .35] M A X .048 [1.22] R EF .1 50 [3.8 1] R EF A .550 [13.97 ] .300 [7 .6 2] M A X .2 00 [5.08 ] R R R R

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Perform ance Specifications Shunts D ual In-Line Package (D IP) Shunts — 760 0 Series C urrent R ating — S tandard pressure — 2 am peres for + 2 0˚C rise above am bient (one conductor per shunt M achine insertable — 1 am pere for + 2 0˚C rise above am bient (one conductor per shunt) Insulation R esistance — 1 x 1 0 1 0 ohm s m in. at 1 00 VD C D ielectric W ithstanding Voltage — 500 VD C m in. C apacitance — 2 picofarads m ax. betw een adjacent straps Tem perature R ating — -55˚C to + 1 05˚C Term inal Strength (B end Test) — Tw o 4 5˚ bend cycles per M IL -S TD -2 02 , M ethod 2 1 1 , C ondition B Solder B ridging — C ut straps can be reconnected by solder bridging. S older bridging recom m endations are:

• U se low tem perature solder (60/4 0 tin/lead)
• U se solder tip approxim ately 1 /32 [0.79] in diam eter
• D o not let solder tip com e in contact w ith plastic m aterial Post Shunts C urrent R ating — 3 am peres m ax. unless otherw ise noted Tem perature R ating — -65˚C to + 1 05˚C (gold) -4 0˚C to + 85˚C (tin) Technical D ocum ents Various technical docum ents are available for your use: Product Specifications describe technical perform ance characteristics and verification tests. They are intended for the D esign, C om ponent and Q uality E ngineer. 1 0 8-753 3 D ual In-Line Package (D IP) Shunts 1 0 8-1 445 2m m M ini Shunt 1 0 8-1 476 E conom y Shunt, M ultiposition Shunt 1 0 8-1 674 D ual B eam Shunt 1 0 8-90 57 Low Profile Shunt 1 0 8-90 62 Tandem Spring Shunt 1 0 8-3 70 0 6 N ovo Shunt w ith Handle Application Specifications describe requirem ents for using the product in its intended application and/or crim ping inform ation. They are intended for the Packaging and D esign E ngineer and the M achine Setup Person. 1 1 4-1 0 45 Tandem Spring Shunt 1 1 4-1 0 54 D ual In-Line Package (D IP) Shunts 1 1 4-1 0 59 E conom y Shunt, D ual B eam Shunt, Low Profile Shunt, M ultiposition Shunt 1 1 4-1 0 74 2m m M ini Shunt Instruction Sheets provide instructions for assem bling or applying the product. They are intended for the M anufacturing A ssem bler or O perator. 40 8-7768 D ual In-Line Package (D IP) Shunts 40 8-3 20 8 Tandem Spring Shunt 40 8-3 23 0 E conom y Shunt, D ual B eam Shunt, Low Profile Shunt 40 8-3 251 M ultiposition Shunt 40 8-3 276 2m m M ini Shunt

AM PM O D U Interconnection System 31 2 1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 E ngineering N otes

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Part Number Index Part N um ber Index N ote: This index lists all cataloged parts by base no. only. Com plete part nos. (w ith prefixes and/or suffixes) are show n on the page(s) indicated. Part N o. Page 102104 290 102106 290 102107 211 102114 203 102128 210, 213 10218 5 255, 258 , 259 102198 139, 140 102202 115, 210 102203 8 5, 116 102241 210, 215 102312 258 , 259 102316 213 102338 203 102348 211 10238 7 210, 220 102393 256 102394 256 102395 26 5 102396 255, 259 102398 255, 256 102399 26 5 102448 256 102449 26 5 102523 116 102536 255, 259 102537 255, 259 102540 255, 259 102541 255, 259 102548 213 102557 149 10256 7 198 10257 0 124, 125 10258 9 193, 200 1026 17 122, 123 1026 18 117 , 118 1026 19 119, 120 1026 20 127 1026 41 26 5 1026 42 26 5 1026 6 6 199 1026 8 1 255, 259 1026 90 193, 199 1026 91 199 1026 92 198 1026 93 257 1026 94 257 1026 95 257 1026 99 8 5, 148 1027 42 17 7 1027 6 6 142 1027 7 7 199 1027 8 3 26 2, 26 3 1027 8 4 26 2, 26 3 1027 8 5 26 2, 26 3 1027 8 6 26 2, 26 3 1027 8 7 26 2, 26 3 1027 8 8 26 2, 26 3 1027 8 9 26 3 1027 91 26 4 1027 92 26 4 1028 02 200 1028 23 259 Part N o. Page 8 7 227 8 5, 96 , 97 8 7 230 8 5, 98 , 99 8 7 232 8 5, 94, 95, 210, 221 8 7 233 94, 95 8 7 247 295 8 7 258 297 8 7 26 2 295 8 7 26 9 298 8 7 27 0 299 8 7 27 8 298 8 7 28 3 296 8 7 309 213 8 7 316 28 6 8 7 456 210, 216 8 7 47 4 129 8 7 48 3 210 8 7 496 133 8 7 499 210, 214 8 7 523 213 8 7 56 8 127 8 7 57 2 126 8 7 57 7 124, 125 8 7 57 9 122, 123 8 7 58 7 119, 120 8 7 58 9 117 , 118 8 7 6 05 8 5, 131 8 7 6 08 130 8 7 6 23 16 3 8 7 6 31 210, 218 , 219 8 7 6 54 297 8 7 6 55 297 8 7 6 6 6 213 8 7 6 6 7 213 8 7 7 10 218 8 7 7 33 219 8 7 7 43 204 8 7 7 56 210, 213 8 7 7 7 2 28 6 8 7 7 7 4 28 6 8 7 8 09 213 8 7 8 7 8 16 3 8 7 8 7 9 8 5, 17 7 8 7 921 218 8 7 922 218 , 219 8 7 97 7 210, 217 8 7 98 3 28 7 8 7 98 4 28 7 8 7 98 5 28 7 8 7 98 6 28 7 8 7 98 7 28 9 8 7 98 8 28 9 8 7 98 9 28 7 8 7 990 28 7 8 7 993 28 7 8 7 995 28 9 102055 126 102090 292 102095 211 102099 290 102100 290 102102 290 102103 290 Part N o. Page 19156 139, 140 57 013 58 57 038 58 57 118 58 57 119 58 57 131 58 , 59 57 138 58 57 139 58 57 144 58 57 145 58 57 28 8 58 57 28 9 58 57 290 58 8 548 7 28 6 8 5493 28 6 8 58 29 295 8 58 39 296 8 58 40 296 8 58 7 5 296 8 5923 296 8 596 9 213 8 6 016 213 8 6 147 294 8 6 17 7 216 8 6 18 1 28 5, 28 7 , 28 8 8 6 18 2 294 8 6 207 296 8 6 28 6 16 9, 17 2, 17 5-17 7 , 18 0, 18 2, 18 9, 191, 195-197 , 214-218 , 220, 256 , 257 8 6 432 28 6 8 6 434 28 6 8 6 47 7 28 6 8 6 47 9 98 , 99 8 6 48 0 28 6 8 6 492 213 8 7 003 28 6 8 7 022 16 3 8 7 025 291 8 7 046 213 8 7 07 7 214-218 , 220, 256 , 257 8 7 105 28 6 8 7 107 211 8 7 116 293 8 7 124 207 8 7 131 209 8 7 132 209 8 7 133 209 8 7 159 293 8 7 16 0 295 8 7 16 5 207 8 7 17 5 208 8 7 17 6 209 8 7 17 9 208 , 209 8 7 190 207 8 7 191 207 8 7 194 297 8 7 195 213 8 7 215 96 , 97 8 7 220 8 5, 93 8 7 224 93

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Part N um ber Index Part N um ber Index (C ontinued) 31 4 Part N o. Page 1048 95 19 104905 208 104909 245 104910 245 104935 247 111196 56 146 07 9 16 3 146 128 109 146 129 109 146 130 110 146 131 110 146 132 8 6 , 109 146 133 109 146 134 8 6 , 110 146 135 110 146 138 17 8 146 205 202 146 250 104, 107 146 252 104, 107 146 253 104, 107 146 254 104, 107 146 256 104, 107 146 257 8 5, 104, 107 146 258 104 146 26 0 104 146 26 1 104 146 26 2 104 146 26 4 104 146 26 5 104 146 26 6 104 146 26 8 8 5, 104 146 26 9 104 146 27 0 104 146 27 2 104 146 27 3 104 146 27 4 102, 107 146 27 6 102, 107 146 27 7 102, 107 146 27 8 102, 107 146 28 0 102, 107 146 28 1 8 5, 102, 107 146 28 2 102 146 28 4 102 146 28 5 102 146 28 6 102 146 28 8 102 146 28 9 102 146 290 102 146 292 102 146 293 8 5, 102 146 294 102 146 296 102 146 297 102 146 304 8 5, 103 146 305 103 146 306 8 5, 103 146 307 103 146 308 8 5, 105 146 309 105 146 310 105 146 311 105 146 315 202 Part N o. Page 10396 0 231 10396 1 231 10396 8 233 10396 9 233 10397 0 233 10397 1 233 10397 2 233 10397 3 233 10397 4 229 10397 5 229 10397 6 229 10397 7 229 10397 8 229 10397 9 229 10406 8 30 10406 9 29 10407 1 28 10407 4 27 10407 6 31 10407 8 40 104118 34 10417 8 33 10418 6 32 104192 38 104196 37 104257 221, 231 10427 1 26 1, 26 3 10427 2 26 1, 26 3 104317 121 104319 128 10436 1 250 10436 2 245 10436 3 245 104438 234 104439 234 104450 221, 248 10447 7 29 10447 9 221, 222, 253 10448 0 221, 222, 253 10448 1 221, 222, 253 10448 2 221, 223 10448 3 224 104500 241 104503 239 104505 254 104506 254 104549 44 104550 45 10458 3 28 2 10458 4 28 2 1046 52 15 1046 55 16 1046 56 16 1046 6 6 30 1046 93 16 1047 44 40 1048 04 28 1048 09 249 1048 91 22 1048 92 21 1048 93 21 1048 94 19 Part N o. Page 1028 26 144 1028 7 1 143 1028 98 146 102903 26 3 102917 213 102918 213 102920 213 102935 28 0 10297 2 107 10297 3 107 10297 6 107 10297 7 107 10298 5 26 3 10298 7 26 1, 26 3 10298 8 26 1, 26 3 102991 26 4 103056 28 1 103058 28 1 10308 0 115 103136 26 1, 26 3 103137 26 1, 26 3 103138 26 2, 26 3 103139 26 2, 26 3 103140 26 2, 26 3 103141 26 2, 26 3 103152 26 1, 26 3 103153 26 1, 26 3 103157 26 1, 26 3 103158 26 1, 26 3 10316 4 8 5, 126 10316 5 127 10316 6 8 5, 122, 123, 210, 255 10316 7 124, 125 10316 8 8 5, 117 , 118 , 210, 255 10316 9 119, 120 10317 1 213 10318 5 107 10318 6 107 103233 147 103239 107 103240 107 10326 4 193, 201 10326 8 259 103291 199 103321 107 103322 107 103327 107 103328 107 103336 8 5, 146 103340 26 1, 26 3 103341 26 1, 26 3 103349 28 1 103350 28 1 10336 1 116 103414 8 5, 115 103455 213 103542 8 5, 147 10357 7 8 5, 16 3 1036 34 247 1036 35 247 Part N o. Page 1036 39 245 1036 40 231 1036 41 231 1036 44 231 1036 45 231 1036 48 233 1036 49 233 1036 50 233 1036 51 233 1036 52 233 1036 53 237 1036 54 239 1036 55 239 1036 56 239 1036 57 239 1036 58 237 1036 59 237 1036 6 0 237 1036 6 1 237 1036 6 9 245 1036 7 2 247 1036 7 3 247 1036 8 0 240 1036 8 1 241 1036 8 2 242 1036 8 4 229 1036 8 5 229 1036 8 6 229 1036 8 7 229 1036 8 8 221, 229 1037 34 231 1037 35 245 1038 17 8 6 , 100 1038 93 237 1038 94 237 1038 95 239 1038 96 239 1038 97 231 103900 233 103901 233 103902 229 103903 229 103904 247 103908 245 103911 39 103916 35 103944 237 103945 237 103946 237 103947 237 103948 237 103949 237 103950 239 103951 239 103952 239 103953 239 103954 239 103955 239 103956 231 103957 231 103958 231 103959 231

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Part Number Index Part N um ber Index (C ontinued) Part N o. Page 137 558 2 252 137 558 3 252 137 57 91 7 , 12 137 57 92 7 137 57 93 7 , 12 137 57 94 7 137 57 95 6 , 12 137 57 96 6 137 57 97 9 137 57 98 9 137 57 99 8 137 58 00 8 137 58 01 12 137 5959 10 137 596 1 10 137 596 3 10 137 596 5 11 137 596 7 11 1445251 12 1445439 12 1445440 12 1445441 12 147 0108 7 9 147 0109 7 8 147 0209 8 0 147 0213 6 6 17 34493 7 5 17 34506 8 1 17 34507 6 7 17 34508 6 6 17 34516 8 4 17 34531 8 3 17 3456 9 7 7 17 346 06 8 2 17 347 7 0 7 3 18 25190 307 18 258 51 139, 140, 210 204106 8 7 6 204106 9 8 4 508 447 6 7 1 508 47 8 0 7 4 508 6 147 294 508 6 18 2 294 510208 4 17 0 5102154 139, 210, 255 5102156 139 510216 0 140 510216 2 140 5103308 135 5103309 135 5103310 136 5103311 136 5104338 137 5104340 138 5111595 57 5146 139 16 9 5146 140 17 0 5147 7 21 8 6 , 17 2 5147 7 22 8 6 , 17 3 5147 7 32 17 2 5147 7 33 17 2 5147 7 34 17 3 Part N o. Page 147 7 40 192 147 7 41 192 147 7 42 18 7 147 7 43 18 7 147 7 44 18 7 147 7 45 190 147 7 46 190 147 7 47 190 17 3144 155, 156 17 3145 155, 157 , 158 , 159 17 3146 155, 16 0, 16 1 219054 58 219055 58 219137 58 219138 58 219253 58 38 257 5 309 38 28 11 308 39008 8 309 390102 310 48 7 544 50 48 7 545 50 48 7 547 48 48 7 57 6 54 48 7 923 48 48 7 937 52 48 7 938 52 48 7 940 48 48 7 941 48 499991 205 530153 310 530554 26 7 530901 26 9 530902 26 8 531226 26 7 , 26 8 531230 308 532955 195 532956 193, 195 533009 195 534204 195 534206 8 5, 17 6 534237 8 5, 17 5 534245 200 534257 198 534258 201 53426 7 8 5, 18 2 53497 2 193, 196 53497 4 193, 197 53497 5 195 53497 8 198 534998 8 5, 17 9, 18 0 535541 8 5, 17 8 535542 8 6 , 18 3, 18 4 53558 4 17 8 53558 5 17 9, 18 0 535598 17 9, 18 0 7 46 38 3 139, 140 8 6 7 052 207 8 8 058 4 309 8 8 1545 309 96 6 926 7 2 137 5549 252 Part N o. Page 146 8 52 107 146 8 53 107 146 8 58 107 146 8 59 107 146 8 6 0 107 146 8 6 1 107 146 8 6 8 107 146 8 6 9 107 146 8 7 0 107 146 8 7 1 107 147 030 235 147 07 0 8 6 , 16 7 147 07 1 16 7 147 07 2 16 7 147 095 18 3, 18 4 147 096 18 3, 18 4 147 099 18 2 147 100 18 2 147 101 190 147 102 190 147 103 190 147 104 192 147 105 8 6 , 192 147 106 192 147 121 16 147 254 202 147 27 8 251 147 323 251 147 324 251 147 326 17 7 147 333 8 6 , 16 5 147 334 16 5 147 335 16 5 147 37 7 44 147 37 8 45 147 38 1 16 147 38 2 16 147 38 3 16 147 38 4 15 147 396 235 147 413 15 147 424 17 6 147 433 16 5 147 434 16 5 147 435 16 5 147 436 16 7 147 437 16 7 147 438 16 7 147 503 16 147 7 20 8 6 , 18 1 147 7 23 18 8 147 7 24 18 7 147 7 26 18 1 147 7 27 18 1 147 7 28 18 8 147 7 29 18 8 147 7 30 18 7 147 7 31 18 7 147 7 36 18 8 147 7 37 18 8 147 7 38 8 6 , 18 8 147 7 39 192 Part N o. Page 146 38 6 17 5 146 427 8 5 146 455 112 146 456 112 146 457 112 146 458 112 146 459 112 146 46 0 112 146 46 1 112 146 46 2 112 146 46 3 112 146 46 4 112 146 46 5 112 146 46 6 112 146 46 7 112 146 46 8 112 146 46 9 112 146 47 0 112 146 47 1 112 146 47 2 112 146 47 3 112 146 47 4 8 6 , 112 146 47 5 112 146 47 6 112 146 47 7 112 146 47 8 112 146 47 9 112 146 48 0 112 146 48 1 112 146 48 2 112 146 48 3 113 146 48 4 113 146 48 5 113 146 48 6 113 146 48 7 113 146 48 8 113 146 48 9 113 146 490 8 5, 113 146 491 113 146 492 113 146 493 113 146 494 113 146 495 113 146 496 113 146 497 113 146 498 113 146 499 113 146 500 113 146 501 113 146 502 113 146 503 113 146 504 113 146 505 113 146 506 113 146 507 113 146 508 113 146 509 113 146 510 113 146 7 6 2 17 6 146 7 6 3 17 5 146 8 50 107 146 8 51 107

1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 AM PM O D U Interconnection System Part N um ber Index 58 06 2 27 3 58 07 4 27 3 58 07 5 27 3 58 336 27 3 58 338 27 3 58 342 254 58 395 27 3 58 540 27 3 58 6 41 211 , 213 9027 3 6 0 9027 4 290 90295 207 90308 298 90328 290 9038 1 211 90431 207 91047 6 0 9108 4 207 9108 5 6 2 91104 298 91112 6 2 9116 9 152 9117 0 152 9117 1 152 91200 6 0 91295 23 91410 26 3 91419 16 3 91516 213 91517 211 , 213 91518 222 , 253 91531 254 91533 207 91541 213 91551 222 , 253 Part N o. Page 10407 2 253 217 6 00 153 , 16 4 , 16 6 , 303 224910 48 , 6 0 26 58 7 1 152 26 596 4 152 308 554 152 312522 27 4 318 6 19 48 , 6 0 354500 300 3547 8 6 27 5 356 48 4 6 0 356 500 300 38 0392 152 46 6 007 298 46 6 37 6 28 6 46 6 56 2 213 46 6 57 1 213 46 6 6 55 213 46 6 7 21 207 46 6 7 23 26 9 46 6 7 6 3 290 46 6 7 6 4 290 46 6 8 12 211 46 6 8 19 26 9 46 6 905 213 46 6 918 213 46 6 921 213 46 6 937 290 46 6 943 26 9 46 6 950 298 46 6 952 26 9 46 6 98 0 222 , 253 46 6 98 1 222 , 253 46 6 98 2 222 , 253 46 6 98 3 254 Part N o. Page 527 116 26 3 543518 23 547 17 8 301 56 596 7 28 6 56 7 239 254 56 7 296 222 , 253 56 7 297 222 , 253 56 7 298 222 , 253 56 7 307 211 56 7 310 207 6 6 28 20 303 6 7 916 7 6 2 6 7 9996 207 7 58 030 16 2 7 6 1420 27 5 7 6 8 338 6 2 8 126 6 5 26 3 8 4347 3 290 8 4347 7 253 , 254 , 26 5 8 43996 214 , 215 , 216 , 217 , 218 , 219 , 220 8 54040 301 8 54449 27 4 8 56 002 27 4 8 56 6 7 5 27 3 904507 16 3 904590 16 3 904591 16 3 904592 16 3 9046 40 16 6 9046 41 16 4 907 459 16 2 9318 00 27 3 1213400 300 Part N o. Page N ote: This index lists all cataloged parts by base no. only. Com plete part nos. (w ith prefixes and/or suffixes) are show n on the page(s) indicated. Tooling Part N um ber Index Part N um ber Index (C ontinued) Part N o. Page 5535512 8 5, 17 0 55356 7 6 8 5, 16 9 55356 7 7 16 9 Part N o. Page 5531216 26 9 5531224 26 9 5531225 26 9 Part N o. Page 5147 7 35 17 3 517 6 26 4 7 0 517 6 8 37 6 8 Part N o. Page 517 8 7 51 7 0 5530553 26 9 5530901 26 9

AM PM O D U Interconnection System 31 7 1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 E ngineering N otes

AM PM O D U Interconnection System 31 8 1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 E ngineering N otes

AM PM O D U Interconnection System 31 9 1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 E ngineering N otes

AM PM O D U Interconnection System 32 0 1 30 781 9 D im ensions are in inches and D im ensions are show n for U SA: 1 -80 0 -52 2 -6752 G erm any: 4 9 -62 51 -1 33-1 9 9 9 CIS W R 0 8/2 0 1 1 m illim eters unless otherw ise reference purposes only. Canada: 1 -9 0 5-4 75-62 2 2 China: 86-4 0 0 -82 0 -60 1 5 specified. Values in brackets Specifications subject M exico: 52 -55-1 1 0 6-0 80 0 Japan: 81 -4 4 -84 4 -80 1 3 E ngineering N otes

Catalog 13078 19 Revised 8 -11 A M PM O D U Interconnection System FO R M O RE IN FO RM ATIO N te.com / products/A M PM O D U System 50 te.com / products/A M PM O D U M TE TE Technical Support Center Internet: te.com / help U SA : +1 (8 00) 522-6 752 Canada: +1 (905) 475-6 222 M exico +52 (0) 55-1106 -08 00 Latin/ S. A m erica: +54 (0) 11-4733-2200 G erm any: +49 (0) 6 251-133-1999 U K: +44 (0) 8 00-26 76 6 6 France: +33 (0) 1-3420-8 6 8 6 N etherlands: +31 (0) 73-6 246 -999 China: +8 6 (0) 400-8 20-6 015 Part num bers in this brochure are RoH S Com pliant*, unless m arked otherw ise. *as defined w w w .te.com / leadfree te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Com pany. A ll Rights Reserved. 13078 19 CIS W R 08 / 2011 A M P, ACTIO N PIN , A M P-LATCH , A M P-O -LECTRIC, A M P-O -M ATIC, A M PLIM ITE, A M PM O D U, A M PO M ATO R, CERTI-CRIM P, CH A M PO M ATO R, PRO -CRIM PER, R-CA M , TE Connectivity and the TE connectivity (logo) are tradem arks. Teflon is a tradem ark of E.I. du Pont de N em ours and Com pany. O ther logos, product and Com pany nam es m entioned herein m ay be tradem arks of their respective ow ners. While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.