MS-95 GAMEWELL-FCI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Compatible with the Gamewell-FCI 600 Series analog addressable control panels. Field programmable. Durable construction. Compact design, blends with surroundings. Recessed pull lever prevents accidental operation. Surface or semi-flush installation. Double action option. Key reset option. Meets ADA requirements. Visible status LED. Terminal block model available (MS-95T). CS-2053ph1.wmf MS-95 An ISO 9000-2000 Company SIGNALING S281 7150-1288:148
12 Clintonville Road, Northford, CT 06472-1610 USA Tel: (203) 484-7161 Fax: (203) 484-7118
CS-2053 Rev. A page 2 of 2 www.gamewell-fci.com Operations (Continued) occurs when the pull station is addressed by the control panel and either reports back a trouble response or does not respond at all. With the standard priority interrupt feature, the MS-95 will report its condition virtually instanta- neously to the Gamewell-FCI FACP. Programming Programming of the MS-95 manual station address is accomplished by setting a single DIP switch easily accessible on the device’s printed circuit board. All other programming is accomplished at the FACP . Engineer’s Specifictions The analog addressable manual pull station shall contain the electronic interface circuitry required for individual device identification, alarm reporting andtrouble supervi- sion. It shall communicate to the main control panel via the analog addressable circuit. The single-action station shall consist of a die-cast aluminum housing fitted with a pull out lever which, when operated, locks in position after activat- ing an alarm initiating contact. Specifications Standby Current: 0.0005 A Alarm Current: 0.0015 A Operating Temperature: 0° C to 49° C (32° F to 120° F) Relative Humidity: 85%, non-condensing Material: Die-cast aluminum Finish: Fire alarm red, smooth gloss enamel. Raised cast letters are highlighted. Target background for pull lever is white glossed enamel. Dimensions MS-95: 4 .625" high x 3.25" wide x 2.0" deep (11.75 H x 8.26 W x 5.08 D cm)( from the backplate). MS-95T: 4.625" high x 3.25" wide x 1.625" deep (11.75 H x 8.26 W x 4.13 cm) (from the backplate). MS-95 with key reset option: 6.25" high x 3.25" wide x 2.0" deep (15.88 H x 8.26 W x 5.08 D cm) (from backplate) with Cat 60 Key. Surface Backbox P/N 28762: 4.625" high x 3.25" wide x 2.375" deep (11.75 H x 8.26 W x 6.03 D cm) tapped for 3/4" conduit. Surface Backbox 71961: 6.25" high x 3.0" wide x 3.25" (15.88 H x 7.6 W x 8.26 D cm) deep.
Ordering Information
MS-95 Analog addressable manual pull station. MS-95T Analog addressable manual pull station with terminals. 30653 Double action option. 30653-01 Key reset option. 30653-02 Key reset/double action option. 27060 Breakglass rod. 28762 Surface backbox. 50397G Weather proof gasket for MS-95 station.
72198 NYC backplate manual station backplate with
1" (2.54 cm) white stripe. 71961 Backbox, surface for key reset options.