501S41N102JF4E

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 36

Technical content

Ceramic Capacitor Solutions X2Y Low ESL High Voltage High Capacitance AC Safety Stacked SMPS Mini-SMPS High Temperature Radial Leaded

The mission of the Johanson Companies is to translate our customer needs into quality electronic components, produced in factories that are models of excellence, supported by innovative service. With over 30 years of experience, Johanson Dielectrics provides both stand- ard and custom technology solutions tailored to your specific electronic applications. Our standard product range includes High V oltage and AC Safety Capacitors providing solutions for Light- ing, IT and Business Equipment designs. Our X2Y Capacitor line provides advanced EMI filtering and IC decoupling solutions and our High Capacitance Tanceram ® products provide the highest capacitance values in the smallest cases sizes. Customized solutions in the areas of High Temperature and High AC power ceramic capacitors are available to customers who require a partnered technology solu- tion. Johanson Dielectrics design and manufacturing opera- tions are located in Sylmar, California and Zhoaqing, PRC. Our quality minded management system uti- lizes continuous improvement programs focused on increased product reliability, manufacturing through- put, and product performance. Our broad experience, applications support, and responsive service enhance our ability to drive down your total cost of procure- ment and speed your time to market. Your Technology Partner 15191 Bledsoe St., Sylmar, California 91342  Tel (818) 364-9800  Fax (818) 364-6100 Johanson Dielectrics, Inc. reserves the right to make design and price changes without notice. All sales are subject to the terms and conditions printed on the back side of our sales order acknowledgment forms, including a limited warranty and remedies for non-conforming goods or defective goods. We will be pleased to provide a copy of these terms and conditions for your review. www.johansondielectrics.com HIGH FREQUENCY CERAMIC SOLUTIONS are offered by our sister company, Johanson Technol- ogy Inc., Camarillo CA. Products include High Q Capacitors, Ceramic and Wire-wound Chip Inductors, and a broad range of LTCC based RF IPCs such as Antennas, Filters, Baluns, Couplers, Matched Filter Baluns, etc. www.johansontechnology.com

3www.johansondielectrics.com SURFACE MOUNT CERAMIC CAPACITORS Ceramic Capacitor Prototyping Kits 4-5 High Voltage Capacitors 250 - 6,000 VDC 6-7 Safety Capacitors 250 VAC, Y2, Y3, Japan Standard 8-9 Low Inductance X2Y Capacitors 10-13 Low Inductance Capacitors 14 Chip Feedthru Filter Capacitors 15 High Power AC Capacitors 16 High Temperature - 200°C Capacitors 17 High Capacitance Tanceram® Capacitors 18-19 SMT Multi-layer Ceramic Capacitors 10 - 200 VDC 20-21 LEADED CERAMIC CAPACITORS SMPS Stacked Capacitors, 125°C & 200°C versions 22-23 Mini-SMPS Stacked Capacitors 24-25 Maxi-Cap TM SMPS Capacitors 26-27 X2Y Low ESL SMPS Stacked Capacitors 28-29 Switch-mode Radial Leaded Capacitors 30-31 High Voltage Radial Leaded Capacitors, 125°C, 200°C, 250°C versions 32-33 Part Number, Dielectric, Packaging Specifications 34-35 ON-LINE PRODUCTS ON-LINE INFORMATION N2200 Chip Capacitors Dielectric Characteristics 200°C Radial Leaded Capacitors Packaging & Marking Tin-Lead Termination Capacitors Environmental Compliance Policies Polyterm® Termination Capacitors Lead-Free Reflow Processing Large Size Multi-layer Ceramic Capacitors High Voltage PCB Design X2Y Filter Eval. & PCB Design Guide Capacitor Power Handling

4 www.johansondielectrics.com Johanson may from time-time adjust actual kit contents based on design demand trends. Check the Johanson web site for design kit updates and kit content changes. CERAMIC CAPACITOR ENGINEERING DESIGN KITS Johanson Dielectrics, Inc. offers a variety of multi-layer chip capacitor sample kits for proto-type design work. Each kit is grouped by type, size, or voltage and contains a selection of popular values and tolerances. The chips are individually packaged in labeled plastic compartments for easy access. The general range of kit contents is described below. Specific part number details may be found at JohansonDielectrics.com

0402 CERAMIC CHIP CAPACITOR KIT P/N: S-0402

1400 piece sample assortment of selected values from 1.0pF to 0.1µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0402 50 VDC - 6.3 VDC NPO, X7R,Y5V 1.0pF to 0.22µF 50 pcs 1400 pcs

0603 CERAMIC CHIP CAPACITOR KIT P/N: S-0603

1400 piece sample assortment of selected values from 1.0pF to 0.1µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0603 50 VDC - 16 VDC NPO, X7R,Y5V 10pF to 0.22µF 50 pcs 1400 pcs

0805 CERAMIC CHIP CAPACITOR KIT P/N: S-0805

1400 piece sample assortment of selected values from 1.0pF to 0.1µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0805 100 VDC - 16 VDC NPO, X7R 10pF to 0.47µF 50 pcs 1400 pcs TANCERAM® HIGH CAPACITANCE CERAMIC CHIP CAPACITOR KIT P/N: S-TAN-X5R 500 piece sample assortment of selected values from 1.0µF to 100µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0402, 0603, 0805 1206, 1210 25 VDC - 6.3 VDC X5R 1.0µF - 100µF 10 - 25 pcs 500 pcs

500 VDC CERAMIC CHIP CAPACITOR KIT P/N: S-500

400 piece sample assortment of selected values from 33pF to 0.1µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0805 - 1812 500 VDC NPO, X7R 33pF to 0.1µF 10-20 pcs 400 pcs

1000 VDC CERAMIC CHIP CAPACITOR KIT P/N: S-1KV

400 piece sample assortment of selected values from 22pF to 0.1µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0805 - 2225 1000 VDC NPO, X7R 22pF to 0.1µF 10-20 pcs 400 pcs

5www.johansondielectrics.com CERAMIC CAPACITOR ENGINEERING DESIGN KITS

2000 VDC CERAMIC CHIP CAPACITOR KIT P/N: S-2KV

300 piece sample assortment of selected values from 22pF to 0.022µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 1206 - 2225 2000 VDC NPO, X7R 22pF to 0.022µF 10-20 pcs 300 pcs X2/Y3 SAFETY CERTIFIED CERAMIC CHIP CAPACITOR KIT P/N: S-SY3 240 piece sample assortment of selected values from 10pF to 1500 pF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 1808 3KV DC / 250 AC NPO, X7R 10pF to 1500 pF 20 pcs 240 pcs X1/Y2 SAFETY CERTIFIED CERAMIC CHIP CAPACITOR KIT P/N: S-SY2 200 piece sample assortment of selected values from 10pF to 2200 pF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 1808 - 2220 5KV DC / 250 AC NPO, X7R 10pF to 2200pF 20 pcs 200 pcs X2Y® EMI FILTER CAPACITOR KIT - 0402 SIZE P/N: S-X07CBK 600 piece sample assortment of selected values from 1.0pF to 0.01µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0402 10 - 50 VDC NPO, X7R 1.0pF to 0.01µF 50 pcs 600 pcs X2Y® EMI FILTER CAPACITOR KIT - 0603 SIZE P/N: S-X14CBK 700 piece sample assortment of selected values from 1.0pF to 0.01µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0603 50 - 100 VDC NPO, X7R 1.0pF to 0.01µF 50 pcs 700 pcs X2Y® EMI FILTER CAPACITOR KIT - 0805 SIZE P/N: S-X15-EMI 300 piece sample assortment of selected values from 1.0pF to 0.01µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0805 50 - 100 VDC NPO, X7R 1.0pF to 0.01µF 20 pcs 300 pcs X2Y® POWER BYPASS CAPACITOR KIT - 0603 SIZE P/N: S-X14-PBP 300 piece sample assortment of selected values from 1.0nF to 1.0µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0603 6.3 - 100 VDC X7R, X5R 1.0nF to 1.0µF 20 pcs 300 pcs X2Y® DC MOTOR FILTER CAPACITOR KIT P/N: S-X2Y-MTR 300 piece sample assortment of selected values from 0.10µF to 0.47µF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 1206 - 1812 100 VDC X7R 0.10µF to 0.47µF 30 pcs 300 pcs Johanson may from time-time adjust actual kit contents based on design demand trends. Check the Johanson web site for design kit updates and kit content changes.

6 www.johansondielectrics.com CASE SIZE C APACITANCE SELECTION JDI /EIA Rated Voltage NPO Dielectric X7R Dielectric Inches (mm) Minimum Maximum Minimum Maximum R15/0805 L W T E/B .080 ±.010 .050 ±.010 .055 Max. .020 ±.010 (2.03 ±.25) (1.27 ±.25) (1.40) (0.51±.25) 250 VDC - - 1000 pF 0.022 µF 500 VDC 10 pF 680 pF 1000 pF 0.010 µF

630 VDC 10 pF 560 pF 1000 pF 6800 pF

1000 VDC 10 pF 390 pF 100 pF 4700 pF

W T E/B .125 ±.010 .062 ±.010 .067 Max. .020 ±.010 (3.17 ±.25) (1.57 ±.25) (1.70) (0.51±.25) 250 VDC - - 1000 pF 0.068 µF 500 VDC 10 pF 1500 pF 1000 pF 0.047 µF 630 VDC 10 pF 1200 pF 1000 pF 0.027 µF 1000 VDC 10 pF 1000 pF 100 pF 0.018 µF

2000 VDC 10 pF 220 pF 100 pF 4700 pF

3000 VDC 10 pF 82 pF 100 pF 1000 pF

W T E/B .125 ±.010 .095 ±.010 .080 Max. .020 ±.010 (3.18 ±.25) (2.41 ±.25) (2.03) (0.51±.25) 250 VDC - - 1000 pF 0.220 µF 500 VDC 10 pF 3900 pF 1000 pF 0.100 µF 630 VDC 10 pF 2700 pF 1000 pF 0.056 µF 1000 VDC 10 pF 1800 pF 100 pF 0.047 µF

2000 VDC 10 pF 560 pF 100 pF 3900 pF

3000 VDC 10 pF 220 pF 100 pF 2700 pF

L W T E/B .189 ±.010 .080 ±.010 .085 Max. .020 ±.010 (4.80 ±.25) (2.03 ±.25) (2.16) (0.51±.25) 500 VDC 10 pF 4700 pF 1000 pF 0.100 µF 630 VDC 10 pF 3300 pF 1000 pF 0.068 µF 1000 VDC 1.0 pF 2200 pF 100 pF 0.047 µF 2000 VDC 1.0 pF 820 pF 100 pF 8200 pF 3000 VDC 1.0 pF 470 pF 100 pF 3900 pF 4000 VDC 1.0 pF 180 pF 100 pF 2200 pF 5000 VDC 1.0 pF 75 pF 47 pF 1000 pF 6000 VDC 1.0 pF 75 pF 47 pF 100 pF ( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown. HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC These high voltage capacitors feature a special internal electrode design which reduces voltage concentrations by distributing voltage gradients throughout the entire capacitor. This unique design also affords increased capacitance values in a given case size and voltage rating. The capacitors are designed and manufactured to the general requirement of EIA198 and are subjected to a 100% electrical testing making them well suited for a wide variety of telecommunication, commercial, and industrial applications.

APPLICATIONS

 Analog & Digital Modems  LAN/WAN Interface  Lighting Ballast Circuits  Voltage Multipliers  DC-DC Converters  Back-lighting Inverters NOW AVAILABLE with Polyterm® soft termination option for demanding environments & processes. Visit our website for full details.

7www.johansondielectrics.com CASE SIZE C APACITANCE SELECTION JDI /EIA Rated Voltage NPO Dielectric X7R Dielectric Inches (mm) Minimum Maximum Minimum Maximum S43 / 1812 L W T E/B .180 ±.010 .125 ±.010 .110 Max. .025 ±.015 (4.57 ±.25) (3.17 ±.25) (2.80) (0.64±.38) 250 VDC - - 0.010 µF 0.470 uF 500 VDC 100 pF 8200 pF 1000 pF 0.330 uF 630 VDC 100 pF 6800 pF 1000 pF 0.180 µF 1000 VDC 10 pF 5600 pF 1000 pF 0.100 µF 2000 VDC 10 pF 1800 pF 100 pF 0.010 µF

3000 VDC 10 pF 1000 pF 100 pF 6800 pF

4000 VDC 10 pF 390 pF 100 pF 2200 pF

5000 VDC 10 pF 150 pF 100 pF 1000 pF

6000 VDC 10 pF 150 pF 10 pF 680 pF

L W T E/B .180 ±.010 .250 ±.010 .140 Max. .025 ±.015 (4.57 ±.25) (6.35 ±.25) (3.56) (0.64±.38) 500 VDC 100 pF 0.018 µF 0.01 µF 1.000 µF 630 VDC 100 pF 0.015 µF 0.01 µF 0.270 µF 1000 VDC 10 pF 0.012 µF 1000 pF 0.047 µF 2000 VDC 10 pF 5600 pF 100 pF 0.022 µF 3000 VDC 10 pF 2200 pF 100 pF 0.010 µF

4000 VDC 10 pF 1200 pF 100 pF 2700 pF

5000 VDC 10 pF 390 pF 100 pF 1200 pF

6000 VDC 10 pF 390 pF 100 pF 820 pF

L W T E/B .225 ±.015 .200 ±.015 .150 Max. .025 ±.015 (5.72 ±.38) (5.08 ±.38) (3.81) (0.64±.38) 500 VDC 1000 pF 0.018 µF 0.01 µF 0.680 µF 630 VDC 1000 pF 0.018 µF 0.01 µF 0.470 µF 1000 VDC 100 pF 0.015 µF 1000 pF 0.100 µF 2000 VDC 100 pF 5600 pF 1000 pF 0.047 µF 3000 VDC 10 pF 2700 pF 100 pF 0.015 µF

4000 VDC 10 pF 1500 pF 100 pF 3300 pF

5000 VDC 10 pF 470 pF 100 pF 2200 pF

6000 VDC 10 pF 470 pF 100 pF 1500 pF

L W T E/B .225 ±.010 .255 ±.015 .160 Max. .025 ±.015 (5.72 ±.25) (6.48 ±.38) (4.06) (0.64±.38) 500 VDC 1000 pF 0.027 µF 0.01 µF 1.000 µF 630 VDC 1000 pF 0.022 µF 0.01 µF 0.680 µF 1000 VDC 100 pF 0.018 µF 1000 pF 0.220 µF 2000 VDC 100 pF 8200 pF 1000 pF 0.100 µF 3000 VDC 10 pF 3300 pF 100 pF 0.022 µF 4000 VDC 10 pF 1800 pF 100 pF 0.010 µF

5000 VDC 10 pF 470 pF 100 pF 3300 pF

( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown.

ELECTRICAL CHARACTERISTICS

Meets the standard NPO & X7R dielectric specifications listed on page 20 Dielectric Withstanding Voltage DWV = 1.5 X rated WVDC for ratings ≤ 500 WVDC, DWV = 1.2 X rated WVDC for ratings ≥ 1,000 WVDC NOTE: Capacitors may require a surface coating to prevent external arcing. Solder mask should not be used beneath capacitors. For more information see JDI Tech Note “Surface Arc Season” HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC LW T E/B HOW TO ORDER HIGH VOLTAGE SURFACE MOUNT P/N written: 202R18W102KV4E

202 R18 W 102 K V 4 E

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 501 = 500 V 631 = 630 V 102 = 1000 V 202 = 2000 V 302 = 3000 V 402 = 4000 V 502 = 5000 V 602 = 6000 V R15=0805 R18=1206 R29=1808 S41=1210 S43=1812 S47=2220 S48=2225 S49=1825 N = NPO W = X7R 1st two digits are significant; third digit denotes number of zeros. 102 = 1000 pF 104 = 0.10 µF J = ± 5% K = ± 10% M = ± 20% V = NI Barrier with 100% Sn Plating (Matte) F = Polyterm flexible termination T = SnPb 4 = Unmarked 6 = EIA Code E =Embossed 7” T =Punched 7” No code = bulk Tape specs. per EIA RS481

8 www.johansondielectrics.com AC SAFETY CAPACITORS Johanson Dielectrics Type SC ceramic chip capacitors are designed for AC voltage surge and lightning protection in line-to-ground interface applications in computer networks, modem, facsimile and other equipment. Johanson’s safety capacitor offering includes four different case sizes and NPO and X7R dielectric materials. These devices are surface mount ready with barrier terminations and tape and reel packaging. Information on capacitor safety ratings and certification details may be found below. LW T E/B SAFETY RATING VOLTAGE RATING WITHSTANDING VOLTAGE IMPULSE VOLTAGE CASE SIZE JOHANSON ORDERING P/N X2/Y3 250 VAC 1,500 VAC 2,500 V 1808 302R29______V3E-**-SC STANDARDS: EN 60384-14:2005, EN 60950 2001  UL 60950-01 CERTIFICATIONS: TUV Rheinland T72110251  UL File E212609  Semko 0026092-1 & 0003222-1 Y3 250 VAC 1,500 VAC 2,500 V 1812 302S43______V3E--SC STANDARDS: EN 60384-14:2005, EN 60950:2001 CERTIFICATIONS: TUV Rheinland T72110251 X1/Y2 250 VAC 1,500 VAC 5,000 V 1808 502R29______V3E--SC STANDARDS: EN 60384-14:2005  UL 60950-01 CERTIFICATIONS: TUV Rheinland T72110897 / UL File E212609-A1-UL-1 Y2 250 VAC 1,500 VAC 5,000 V 2211 502R30______V3E--SC STANDARDS: EN 60384-14:2005  UL 60950-01 CERTIFICATIONS: TUV Rheinland T72110897  UL File: E212609-A1-UL-1 X1/Y2 250 VAC 1,500 VAC 5,000 V 2220 502S47______V3E--SC STANDARDS: EN 60384-14:2005  UL 60950-01 CERTIFICATIONS: TUV Rheinland T72110897  UL File: E212609-A1-UL-1 STANDARDS: JIS-C-5102  JIS-C-5150 CERTIFICATIONS: N/A X Capacitors are defined as suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Y Capacitors are defined as suitable for use in situations where failure of the capacitor could lead to danger of electric shoc k. Polyterm® soft termination option available for demanding environments & processes. HOW TO ORDER AC SAFETY CAPACITORS P/N written: 302R29W102MV3E-**-SC

302 R29 W 102 M V 3 E -****-SC

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING TYPE 302 = 250VAC [3000V Impulse] 502 = 250VAC [5000V Impulse] AC2 =250VAC [N/A] R29=1808 R30=2211 S43=1812 S47=2220 AC2=2220 N = NPO W = X7R 1st two digits are significant; third digit denotes number of zeros, R = decimal. 102 = 1000 pF 104 = 0.10 µF 5R0 = 5.0pF J = ± 5% K = ± 10% M = ± 20% V = NI Barrier with 100% Sn Plating (Matte) F = Polyterm flexible termination 3 = Special 4 = Unmarked E = Embossed 7” No code = bulk Tape specs. per EIA RS481 SC = Safety Certified JS = Japan Safety

9www.johansondielectrics.com AC SAFETY CAPACITORS R29 / 1808 X2/Y3 INCHES (mm) .085 Max. (2.16) L W T E/B 5 pF10 pF12 pF15 pF18 pF22 pF27 pF33 pF47 pF56 pF68 pF100 pF 120 pF150 pF180 pF220 pF270 pF330 pF470 pF560 pF680 pF1000 pF1200 pF1500 pF1800 pF2200 pF2700 pF3300 pF4700 pF INCHES (mm) .115 Max. (2.92) L W T E/B S43 / 1812 INCHES (mm) .085 Max. (2.16) L W T E/B R29 / 1808 X1/Y2 INCHES (mm) .115 Max. (2.92) L W T E/B R30 / 2211 INCHES (mm) .150 Max. (3.81) L W T E/B S47 / 2220 X1/Y2 DIELECTRIC NPO X7R J29 / 1808 Japan Safety INCHES (mm) .085 Max. (2.16) L W T E/B INCHES (mm) .115 Max. (2.92) L W T E/B J43 / 1812 Japan Safety INCHES (mm) .150 Max. (3.81) L W T E/B J47 / 2220 Japan Safety SAFETY CERTIFIED JAPAN STANDARD 470pF 1000pF 2200pF 3300pF 4700pF 0.01µF 0.022µF 0.047µF 0.10µF

10 www.johansondielectrics.com X2Y® FILTER & DECOUPLING CAPACITORS X2Y® filter capacitors employ a unique, patented low inductance design featuring two balanced capacitors that are immune to temperature, voltage and aging performance differences. These components offer superior decoupling and EMI filtering performance, virtually eliminate parasitics, and can replace multiple capacitors and inductors saving board space and reducing assembly costs. ADVANTAGES  One device for EMI suppression or decoupling  Replace up to 7 components with one X2Y  Differential and common mode attenuation  Matched capacitance line to ground, both lines  Low inductance due to cancellation effect  Amplifier FIlter & Decoupling  High Speed Data Filtering  EMC I/O Filtering  FPGA / ASIC / µ-P Decoupling  DDR Memory Decoupling X2Y® technology patents and registered trademark under license from X2Y ATTENUATORS, LLC EMI Filtering (1 Y-Cap.) <10pF 10pF 22pF 27pF 33pF 47pF 100pF 220pF 470pF 1000pF 1500pF 2200pF 4700pF .010µF .015µF .022µF .039µF .047µF 0.10µF 0.18µF 0.22µF 0.33µF 0.40µF 0.47µF 1.0µF Power Bypass (2 Y-Caps.) <20pF 20pF 44pF 54pF 66pF 94pF 200pF 440pF 940pF 2000pF 3000pF 4400pF 9400pF .020µF .030µF .044µF .078µF .094µF 0.20µF 0.36µF 0.44µF 0.68µF 0.80µF 0.94µF 2.0µF SIZE CAP . CODE XRX 100 220 270 330 470 101 221 471 102 152 222 472 103 153 223 393 473 104 184 224 334 404 474 105 0402 (X07) NPO 50 50 50 50 50 50 50 X7R 50 50 50 50 50 50 16 0603 (X14) NPO 100 100 100 100 100 50 50 50 X7R 100 100 100 100 100 100 100 100 50 25 25 16 10 6.3 X5R 16 10 10 10 0805 (X15) NPO 100 100 100 100 100 100 100 50 X7R 100 100 100 100 100 100 100 100 50 50 50 25 10 1206 (X18 NPO VOLTAGE RATINGS 6.3 = 6.3 VDC 10 = 10 VDC 16 = 16 VDC 25 = 25 VDC 50 = 50 VDC 100 = 100 VDC 500 = 500 VDC 100 X7R 100 100 100 100 100 16 16 10 1210 (X41) X7R 500 100 100 100 25 16 1410 (X44) X7R 500 100 1812 (X43) X7R 500 100 Contact factory for part combinations not shown. Filtering capacitance is specified as Line-to-Ground ( Terminal A or B to G) Power Bypass capacitance is specified Power-to-Ground (A + B to G) Rated voltage is from line to ground in Circuit 1, power to ground in Circuit 2 . HOW TO ORDER X2Y® FILTER & DECOUPLING CAPACITORS P/N written: 101X14W102MV4T

100 X14 W 102 M V 4 T

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 6R3 = 6.3 V 100 = 10 V 160 = 16 V 250 = 25 V 500 = 50 V 101 = 100 V 501 = 500 V X07=0402 X14=0603 X15=0805 X18=1206 X41=1210 X44=1410 X43=1812 N = NPO W = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros, R = decimal. 102 = 1000 pF 104 = 0.10 µF 5R6 = 5.6pF M = ± 20% * D = ± 0.50 pF *Values < 10 pF only V = NI Barrier with 100% Tin Plating (Matte) F = Polyterm flexible termination T = SnPb 4 = Unmarked (Not available) E =Embossed 7” T =Punched 7” No code = bulk Tape specs. per EIA RS481

11www.johansondielectrics.com Dimensional ViewCross-sectional View G G A B Equivalent Circuits A B CB W EB L T X2Y® FILTER & DECOUPLING CAPACITORS CASE SIZE 0402 (X07) 0603 (X14) 0805 (X15) 1206 (X18) 1210 (X41) 1410 (X44) 1812 (X43) IN mm IN mm IN mm IN mm IN mm IN mm IN mm L 0.045 ± 0.003 1.143 ± 0.076 0.064 ± 0.005 1.626 ± 0.127 0.080 ± 0.008 2.032 ± 0.203 0.124 ± 0.010 3.150 ± 0.254 0.125 ± 0.010 3.175 ± 0.254 0.140 ± 0.010 3.556 ± 0.254 0.174 ± 0.010 4.420 ± 0.254 W 0.025 ± 0.003 0.635 ± 0.076 0.035 ± 0.005 0.889 ± 0.127 0.050 ± 0.008 1.270 ± 0.203 0.063 ± 0.010 1.600 ± 0.254 0.098 ± 0.010 2.489 ± 0.254 0.098 ± 0.010 2.490 ± 0.254 0.125 ± 0.010 3.175 ± 0.254 T 0.020 max 0.508 max 0.026 max 0.660 max 0.040 max 1.016 max 0.050 max 1.270 max 0.070 max 1.778 max 0.070 max 1.778 max 0.090 max 2.286 max EB 0.008 ± 0.003 0.203 ± 0.076 0.010 ± 0.006 0.254 ± 0.152 0.012 ± 0.008 0.305 ± 0.203 0.016 ± 0.010 0.406 ± 0.254 0.018 ± 0.010 0.457 ± 0.254 0.018 ± 0.010 0.457 ± 0.254 0.022 ± 0.012 0.559 ± 0.305 CB 0.012 ± 0.003 0.305 ± 0.076 0.018 ± 0.004 0.457 ± 0.102 0.022 ± 0.005 0.559 ± 0.127 0.040 ± 0.005 1.016 ± 0.127 0.045 ± 0.005 1.143 ± 0.127 0.045 ± 0.005 1.143 ± 0.127 0.045 ± 0.005 1.143 ± 0.127 ELECTRICAL CHARACTERISTICS NPO X7R X5R Temperature Coefficient: ±15% (-55 to +125°C) ±15% (-55 to +125°C) ±15% (-55 to +85°C) Dielectric Strength: Vrated ≤100VDC: DWV = 2.5 X WVDC, 25°C, 50mA max. Vrated = 500VDC: DWV = 1.5 X WVDC, 25°C, 50mA max. Dissipation Factor: 0.1% max. WVDC ≥ 50 VDC: 2.5% max. WVDC = 25 VDC: 3.5% max. WVDC = 10-16 VDC: 5.0% max. WVDC = 6.3 VDC: 10% max. WVDC ≥ 50 VDC: 5% max. WVDC ≤ 25 VDC: 10% max. Insulation Resistance (Min. @ 25°C, WVDC) C≤ 0.047µF: 1000 ΩF or 100 GΩ, whichever is less C> 0.047µF: 500 ΩF or 10 GΩ, whichever is less Test Conditions: C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS Other: See main catalog page 35 for additional dielectric specifications. Power Ground G1 G2 A B EMI Filtering S21 Signal-to-Ground Power Bypass S21 Power-to-Ground G1 G2 A B Signal 1 Signal 2 Ground 10.0Ω 1.00Ω 0.10Ω 0.01Ω Approximate Impedance ( Ω) 10.0Ω 1.00Ω 0.10Ω 0.01Ω Approximate Impedance ( Ω) Labeled capacitance values below follow the P/N order code (single Y cap value) Effective capacitance measured in Circuit 2 is 2X of the labled single Y cap value.

12 www.johansondielectrics.com The X2Y® Design - A Balanced, Low ESL, “Capacitor Circuit” The X2Y® capacitor design starts with standard 2 terminal MLC capacitor’s opposing electrode sets, A & B, and adds a third electrode set (G) which surround each A & B electrode. The result is a highly vesatile three node capacitive circuit containing two tightly matched, low inductance capacitors in a compact, four- terminal SMT chip. Amplifier Input Filter Example In this example, a single Johanson X2Y® component was used to filter noise at the input of a DC instrumentation amplifier. This reduced component count by 3-to-1 and costs by over 70% vs. conventional filter components that included 1% film Y-capacitors. Parameter X2Y ® 10nF Discrete 10nF, 2 @ 220 pF Comments DC offset shift < 0.1 µV < 0.1 µV Referred to input Common mode rejection 91 dB 92 dB Source: Analog Devices, “A Designer’s Guide to Instrumentation Amplifiers (2nd Edition)” by Charles Kitchin and Lew Counts EMI Filtering: The X2Y ® component contains two shunt or “line-to-ground” Y capacitors. Ultra-low ESL (equivalent series inductance) and tightly matched inductance of these capacitors provides unequaled high frequency Common-Mode noise filtering with low noise mode conversion. X2Y ® components reduce EMI emissions far better than unbalanced discrete shunt capacitors or series inductive filters. Differential signal loss is determined by the cut off frequency of the single line-to-ground (Y) capacitor value of an X2Y . G1 G2 A B Signal 1 Signal 2 Ground X2Y® FILTER & DECOUPLING CAPACITORS Power Bypass / Decoupling For Power Bypass applications, X2Ys ® two “Y” capacitors are connected in parallel. This doubles the total capacitance and reduces their mounted inductance by 80% or 1/5th the mounted inductance of similar sized MLC capacitors enabling high-performance bypass networks with far fewer components and vias. Low ESL delivers improved High Frequency performance into the GHz range. Power Ground G1 G2 A B GSM RFI Attenuation in Audio & Analog GSM handsets transmit in the 850 and 1850 MHz bands using a TDMA pulse rate of 217Hz. These signals cause the GSM buzz heard in a wide range of audio products from headphones to concert hall PA systems or “silent” signal errors created in medical, industrial process control, and security applications. Testing was conducted where an 840MHz GSM handset signal was delivered to the inputs of three different amplifier test circuit configurations shown below whose outputs were measured on a HF spectrum analyzer. 1) No input filter, 2 discrete MLC 100nF power bypass caps. 2) 2 discrete MLC 1nF input filter, 2 discrete MLC 100nF power bypass caps. 3) A single X2Y 1nF input filter, a single X2Y 100nF power bypass cap. X2Y configuration provided a nearly flat response above the ambient and up to 10 dB imrpoved rejection than the conventional MLCC configuration.

13www.johansondielectrics.com X2Y High Performance Power Bypass - Improve Performance, Reduce Space & Vias Actual measured performance of two high performance SerDes FPGA designs demonstrate how a 13 component X2Y bypass network signi ficantly out performs a 38 component MLC network. For more information see http://johansondielectrics.com/pdfs/JDI_X2Y_STXII.pdf Common Mode Choke Replacement  Superior High Frequency Emissions Reduction  Smaller Sizes, Lighter Weight  No Current Limitation  Vibration Resistant  No Saturation Concerns See our website for a detailed application note with component test comparisons and circuit emissions measurements. X2Y® FILTER & DECOUPLING CAPACITORS Parallel Capacitor Solution A common design practice is to parallel decade capacitance values to extend the high frequency performance of the filter network. This causes an unintended and often over-looked effect of anti-resonant peaks in the filter networks combined impedance. X2Y’s very low mounted inductance allows designers to use a single, higher value part and completely avoid the anti-resonance problem. The impedance graph on right shows the combined mounted impedance of a 1nF , 10nF & 100nF 0402 MLC in parrallel in RED. The MLC networks anti-resonance peaks are nearly 10 times the desired impedance. A 100nF and 47nF X2Y are plotted in BLUE and GREEN. (The total capacitance of X2Y (Circuit 2) is twice the value, or 200nF and 98nF in this example.) The sigle X2Y is clearly superior to the three paralleled MLCs. Measured Common Mode Rejection

14 www.johansondielectrics.com LOW INDUCTANCE CHIP CAPACITORS (LICC) LICC capacitors are specially designed to exhibit lower inductance by altering the aspect ratio of the terminations. The smaller current loop length results in Equivalent Series Inductance (ESL) that is typically 60% lower then standard MLCs of the same size. This ESL improvement is extremely advantageous in the high frequency power decoupling of high speed digital MPU, FPGA, DSP , etc..

FEATURES

 Low Inductance  Surface Mount  High Series Resonant Frequency  RoHS Compliant  Small Size  Sn-Pb and Polyterm ® Termination Options CASE SIZE AVAILABLE CAPACITANCE 0306 B14 L W T EB .032 ±.008 .063 ±.008 .035 Max. .010±.005 (0.81 ±.20) (1.60 ±.20) (0.90) (0.25±.13) X7R 25V 25V 25V 16V 6.3V X5R 10V 10V 6.3V 6.3V 6.3V 0508 B15 L W T EB .050 ±.010 .080 ±.010 .060 Max. .020±.010 (1.27 ±.25) (2.03 ±.25) (1.52) (0.51±.25) X7R 50V 50V 25V 25V 16V 6.3V 6.3V X5R 10V 10V 6.3V 0612 B18 L W T EB .062 ±.010 .125 ±.010 .060 Max. .010±.005 (1.57 ±.25) (3.17 ±.25) (1.52) (0.25±.13) X7R 50V 50V 50V 50V 25V 16V 6.3V X5R 10V 10V 6.3V 6.3V Please visit our website for additional product details and ordering information W MLC L L LICC W

15www.johansondielectrics.com CHIP FILTER / FEED-THRU CAPACITORS Our Feed-Thru Capacitors provide excellent EMI, I/O & Power Line filtering exhibiting much lower inductance than standard SMT capacitors which results in broader frequency response. These are Precious Metal Electrode (PME) products with higher current ratings than comparable Base Metal Electrode (BME) parts.  1 Amp Current Rating  Low Inductance, High SRF  Surface Mount Non-polarized  Sn-Pb and Polyterm ® Termination Options  DC Power Line EMI Filter  RF Immunity FIlter  RF Amplifier Gain Filter CASE SIZE AVAILABLE CAPACITANCE VDC 22pF 47pF 100pF 220pF 470pF 1.0nF 2.2nF 4.7nF 10nF 22nF 47nF 100nF 220nFEIA / JDI Inches (mm) 0603 F14 L W T EB CB .064 ± .005 .035 ± .005 .026 Max. .009 ± .004 .018 ± .004 (1.60 ± 0.20) (0.81 ± 0.20) (0.66) (0.23± 0.10) (0.46 ± 0.10) 0805 F15 L W T EB CB .080 ± .080 .050 ± .080 .040 Max. .009 ± .004 .020 ± .005 (2.03 ± 0.25) (1.27 ± 0.25) (1.02) (0.23 ± 0.10 ) (0.56 ± 0.12) 100 1206 F18 L W T EB CB .124 ± .010 .063 ± .010 .050 Max. .009 ± .004 .040 ± .005 (3.15 ± 0.25) (1.60 ± 0.25) (1.27) (0.23 ± 0.10) (1.02 ± 0.13) 100 Please visit our website for additional product details and ordering information

16 www.johansondielectrics.com HIGH VOLTAGE AC POWER CERAMIC CAPACITORS CASE SIZE RATED VOLTAGE AVAILABLE CAPACITANCE DC AC NPO Dielectric X7R Dielectric Inches (mm) Minimum Maximum Minimum Maximum R18/1206 L W T E/B .125 ±.010 .062 ±.010 .067 Max. .020 ±.010 (3.17 ±.25) (1.57 ±.25) (1.70) (0.51±.25) 250 VDC 141 Vrms - - 1000 pF 0.068 µF 500 VDC 283 Vrms 10 pF 1500 pF 1000 pF 0.027 µF 630 VDC 356 Vrms 10 pF 1200 pF 1000 pF 0.010 µF

1000 VDC 566 Vrms 10 pF 1000 pF 100 pF 5600 pF

W T E/B .125 ±.010 .095 ±.010 .080 Max. .020 ±.010 (3.18 ±.25) (2.41 ±.25) (2.03) (0.51±.25) 250 VDC 141 Vrms - - 1000 pF 0.120 µF 500 VDC 283 Vrms 10 pF 3900 pF 1000 pF 0.047 µF 630 VDC 356 Vrms 10 pF 2700 pF 1000 pF 0.027 µF 1000 VDC 566 Vrms 10 pF 1800 pF 100 pF 0.010 µF S43/1812 L W T E/B .180 ±.010 .125 ±.010 .110 Max. .025 ±.015 (4.57 ±.25) (3.17 ±.25) (2.80) (0.64±.38) 250 VDC 141 Vrms - - 0.010 µF 0.220 uF 500 VDC 283 Vrms 100 pF 8200 pF 1000 pF 0.150 uF 630 VDC 356 Vrms 100 pF 6800 pF 1000 pF 0.100 µF 1000 VDC 566 Vrms 10 pF 5600 pF 1000 pF 0.022 µF Please visit our website for additional product details and ordering information TYPICAL POWER RATINGS VS CHIP SIZE EIA Size JDI Size Rated Power 1206 R18 0.08 W 1210 S41 0.20 W 1812 S43 0.40 W This capacitor series was developed for applications requiring AC power handling. Because ceramic chips have an MSL (moisture sensitivity level) of 1.0, they exhibit far better lead-free solder reflow performance than competing FILM caps. This series is also available with Polyterm ® flexible terminations which increases their resistance to cracking from excessive PCB flexure.  Film Cap Replacement  Florescent and HID Lighting Ballasts  Industrial Controls  Networking

17www.johansondielectrics.com HIGH TEMPERATURE SURFACE MOUNT MLCCS 200°C Johanson’s high temperature MLCC series exhibit stable perfor- mance across an extended operating temperature range of -55°C to +200°C. Both Class I and Class II parts are available with DC voltage ratings of 50,100 and 200V satisfying a wide range of demanding applications. FEATURES APPLICATIONS  Stable 200°C Operation  Deep Hole Drilling Electronics  Compact SMD Chip  High Temperature Modules  Polyterm® Termination Option  Industrial Equipment  Sn-Pb Termination Option  Automotive  Avionics ELECTRICAL CHARACTERISTICS TEMPERATURE - VOLTAGE COEFFICIENT NPO X7R OPERATING RANGE: -55 to +200°C -55 to +200°C TEMP . COEFFICIENT: 0±30ppm/°C +15% -45% AGING RATE: None <1.0% per decade INSULATION RESISTANCE: 25°C IR >100GΩ or 1000 ΩF whichever 200°C IR >10 ΩF or 100 ΩF is less WITHSTANDING VOLTAGE:

2.5 X WVDC for ratings ≤ 200 VDC

1.5 X WVDC for ratings 201-500 VDC

TEST CONDITIONS: C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS C ≤ 100 pF; 1Mhz ±50kHz; 1.0±0.2 VRMS X7R Temp. Only X7R Temp. & Rated Voltage (100%) NPO Temp. & Rated Voltage (100%) CASE SIZE Inches (mm) Rated Voltage NPO Dielectric X7R Dielectric Minimum Maximum Minimum Maximum T14/0603 L W T E/B .063 ±.008 .032 ±.008 .035 Max. .010±.005 (1.60 ±.20) (0.81 ±.20) (0.89) (.25±.13) 50 VDC 10 pF 330 pF 100 pF 0.010 pF

100 VDC 10 pF 220 pF 100 pF 2200 pF

200 VDC 10 pF 120 pF 100 pF 5600 pF

L W T E/B .080 ±.010 .050 ±.010 .055 Max. .020±.010 (2.03 ±.25) (1.27 ±.25) (1.40) (0.51±.25 ) 50 VDC 10 pF 1500 pF 1000 pF 0.033 µF 100 VDC 10 pF 1000 pF 1000 pF 0.010 µF

200 VDC 10 pF 680 pF 1000 pF 2200 pF

L W T E/B .125 ±.010 .062 ±.010 .067 Max. .020±.010 (3.17 ±.25) (1.57 ±.25) (1.70) (0.51±.25 ) 50 VDC 10 pF 3300 pF 1000 pF 0.100 µF 100 VDC 1.0 pF 2200 pF 1000 pF 0.022 µF 200 VDC 1.0 pF 1500 pF 1000 pF 5600 pF T41/1210 L W T E/B .125 ±.010 .095 ±.010 .090 Max. .020±.010 (3.18 ±.25) (2.41 ±.25) (2.03) (0.51±.25 ) 50 VDC 10 pF 5600 pF 0.047 µF 0.220 µF 100 VDC 10 pF 4700 pF 0.047 µF 0.056 µF 200 VDC 10 pF 3300 pF 0.047 µF 0.015 µF T43/1812 L W T E/B .175 ±.010 .125 ±.010 .110 Max. .025±.015 (4.45 ±.25) (3.17 ±.25) (2.80) (0.64±.38) 50 VDC 1000 pF 0.012 µF 0.047 µF 0.470 µF 100 VDC 1000 pF 0.010 µF 0.047 µF 0.180 µF 200 VDC 1000 pF 8200 pF 0.047 µF 0.047 µF Please visit our website for additional product details and ordering information

18 www.johansondielectrics.com TANCERAM® CHIP CAPACITORS TANCERAM® chip capacitors can replace tantalum capacitors in many applications and offer several key advantages over traditional tantalums. Because Tanceram ® capacitors exhibit extremely low ESR, equivalent circuit performance can often be achieved using considerably lower capacitance values. Low DC leakage reduces current drain, extending the battery life of portable products. Tancerams ® high DC breakdown voltage ratings offer improved reliability and eliminate large voltage de-rating common when designing with tantalums. ADVANTAGES  Low ESR  Low DC Leakage  Higher Surge Voltage  Non-polarized Devices  Reduced CHIP Size  Improved Reliability  Higher Insulation Resistance  Higher Ripple Current 0.01 0.1 0.001 0.01 0.1 1 10 10 0 ESR (Ohms) Frequency (MHz) Typical ESR Comparison 1.0 μF / 16V Tantalum 1.0 μF / 16V TANCERAM ® 25% 50% 75% 100% 0 100 200 300 400 50 % Distribution DC Breakdown Voltage Typical Breakdown Voltage Comparison 1.0 μF / 16V Tantalum 1.0 μF / 16V TANCERAM ®  Switching Power Supply Smoothing (Input/Output)  Backlighting Inverters  DC/DC Converter Smoothing (Input/Output)  General Digital Circuits HOW TO ORDER TANCERAM® Part number written: 100R15X106MV4E

100 R15 X 106 M V 4 E

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 6R3 = 6.3 V 100 = 10 V 160 = 16 V 250 = 25 V 500 = 50 V 101 = 100 V See Chart W = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros. 105 = 1.00 µF 476 = 4.70 µF 107 = 10.0 µF K = ±10% M = ±20% V = Nickel Barrier with 100% Tin Plating (Matte) T = SnPb* (*available on select parts) 4 = Unmarked Code Type Reel E Plastic 7” T Paper 7” Tape specifications conform to EIA RS481

19www.johansondielectrics.com Dielectric: X7R X5R Temperature Coefficient: ±15% (-55 to +125°C) ±15% (-55 to +85°C) Dissipation Factor: For ≥ 50 VDC: 5% max. For ≤ 25 VDC: 10% max. For ≥ 50 VDC: 5% max. For ≤ 25 VDC: 10% max. Insulation Resistance (Min. @ 25°C, Wvdc) 100 ΩF or 10 GΩ, whichever is less Dielectric Strength: 2.5 X WVDC, 25°C, 50mA max. Test Conditions: Capacitance values ≤ 22 µF: 1.0kHz±50Hz @ 1.0±0.2 Vrms Capacitance values > 22 µF: 120Hz±10Hz @ 0.5V±0.1 Vrms Other: See page 35 for additional dielectric specifications. TANCERAM® CHIP CAPACITORS CASE SIZE CAPACITANCE SELECTION EIA / JDI Inches (mm) VDC 1.0 µF 2.2 µF 3.3 µF 4.7 µF 10 µF 22 µF 47 µF 100 µF 0402 R07 L W T EB .040 ±.004 .020 ±.004 .025 Max. .008 ±.004 (1.02 ±.10) (0.51 ±.10) (0.64) (0.20±.10) 6.3 0603 R14 L W T EB .063 ±.008 .032 ±.008 .035 Max. .010±.005 (1.60 ±.20) (0.81 ±.20) (0.89) (.25±.13) 6.3 0805 R15 L W T EB .080 ±.010 .050 ±.010 .060 Max. .020±.010 (2.03 ±.25) (1.27 ±.25) (1.52) (0.51±.25 ) 6.3 1206 R18 L W T EB .125 ±.010 .062 ±.010 .070 Max. .020 +.015-0.01 (3.17 ±.25) (1.57 ±.25) (1.78) (0.51+.38-.25) 100 6.3 1210 S41 L W T EB .125 ±.010 .095 ±.010 .110 Max. .020 +.015-.010 (3.18 ±.25) (2.41 ±.25) (2.8) (0.51+.38-.25) 100 6.3 1812 S43 L W T EB .175 ±.010 .125 ±.010 .140 Max. .035 ±.020 (4.45 ±.25) (3.17 ±.25) (3.55) (0.89 ±0.51) 100 6.3 WXWXWXWXWXWXWXWX LW T E/B DIELECTRIC W (X7R) X (X5R)

20 www.johansondielectrics.com CASE SIZE Voltage AVAILABLE CAPACITANCE CODE JDI Inches mm 0R5 XRX 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 R05 0201 (0603) 25V L W T EB .024 ±.001 .012 ±.001 .012 ±.001 .006 ±.002 (0.60 ±.03) (0.30 ±.03) (0.30 ±.03) (0.15±.05) 16V 10V R07 0402 (1005) 50V L W T EB .040 ±.004 .020 ±.004 .025 Max. .008 ±.004 (1.02 ±.10) (0.51 ±.10) (0.64) (0.20±.10) 25V 16V 10V R14 0603 (1608) 200V 100V L W T EB .063 ±.008 .032 ±.008 .035 Max. .010±.005 (1.60 ±.20) (0.81 ±.20) (0.89) (.25±.13) 50V 25V 16V R15 0805 (2012) 200V 100V L W T EB .080 ±.010 .050 ±.010 .050 Max. .020±.010 (2.03 ±.25) (1.27 ±.25) (1.27) (0.51±.25 ) 50V 25V 16V R18 1206 (3216) 200V 100V L W T EB .125 ±.010 .062 ±.010 .050 Max. .020 ±.010 (3.17 ±.25) (1.57 ±.25) (1.27) (0.51 ±.25) 50V 25V 16V S41 1210 (3224) 200V 100V L W T EB .125 ±.010 .095 ±.010 .065 Max. .020 ±.010 (3.18 ±.25) (2.41 ±.25) (1.65) (0.51 ±.25) 50V LW T E/B 25V 16V S43 1812 (4532) 200V 100V NPO L W T EB .175 ±.010 .125 ±.010 .085 Max. .025 ±.015 (4.45 ±.25) (3.17 ±.25) (2.16) (0.64 ±.38) 50V X7R 25V X5R 16V 0R5 XRX 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 SURFACE MOUNT MLCCS 10 - 200 VDC

21www.johansondielectrics.com AVAILABLE CAPACITANCE CODE Voltage CASE SIZE 122 152 182 222 272 332 392 472 562 822 103 123 153 183 223 273 333 473 563 683 823 104 224 334 474 105 225 335 475 106 476 107 0201 R05 NPO 25V X7R 16V X5R 10V 0402 R07 50V 25V 16V 10V See Tanceram High Capacitance Series for values ≥ 1.0µF 200V 0603 R14 100V 50V 25V 16V See Tanceram High Capacitance Series for values ≥ 1.0µF 200V 0805 R15 100V 50V 25V 16V See Tanceram High Capacitance Series for values ≥ 1.0µF 200V 1206 R18 100V 50V 25V 16V See Tanceram High Capacitance Series for values ≥ 1.0µF 200V 1210 S41 100V 50V 25V 16V See Tanceram High Capacitance Series for values ≥ 1.0µF 200V 1812 S43 100V 50V 25V 16V 122 152 182 222 272 332 392 472 562 822 103 123 153 183 223 273 333 473 563 683 823 104 224 334 474 105 225 335 475 106 476 107 SURFACE MOUNT MLCCS 10 - 200 VDC

22 www.johansondielectrics.com CASE SIZE E C D B A .250" MIN .100" MAX .025" MIN .100" TYP .055" ± .010 .020" ± .002 F .010" ± .002 Straight Lead L-Lead J-Lead .050" min .070" ± .010 .050" min STACKED SMPS CERAMIC CAPACITORS Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and high frequency applications where tantalum or aluminum electrolytic capacitors may not be suitable. The P-Series feature mechanical and pin-out configurations per DSCC 87106 and 88011 drawings while the E-Series feature mechanical and pin-out configurations more common in European design applications. KEY FEATURES  P-Series Approved to DSCC Drawings 87106 & 88011 MIL-PRF-49470  New T-Series 200°C for downhole tools and aircraft engine control applications.  E-Series Common European Lead Styles available to MIL-PRF-49470 requirements.  NPO & X7R Dielectrics, 50 to 500 VDC Ratings  Low ESR / Low ESL, Ideal for SMPS Filtering Applications  Custom Sizes, Voltages, and Values Available HOW TO ORDER STACKED SMPS Part number written: 201P03W275KJ4H

201 P03 W 275 K J 4 H

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 500 = 50 V 101 = 100 V 201 = 200 V 501 = 500 V See Chart N = NPO B = BX W = X7R 1st two digits are significant; third digit denotes number of zeros. 101 = 100 pF 102 = 1000 pF 103 = 0.01 µF 105 = 1.00 µF J = ±5% K= ±10% L = ±15% M = ±20% N = ±30% Z = +80% -20% P = +100% -0% J = “J” Leads (formed in) L = “L” Leads (formed out) M = “L” Leads with reduced height of .045” +/- .010” N = Straight Lead 4 = Standard 3 = Specified T = Tape and Reel H = High Reliability testing per customer requirements S = Special Part

23www.johansondielectrics.com STACKED SMPS CERAMIC CAPACITORS P-SERIES DSCC STYLE X7R CAPACITANCE / VOLTAGE SELECTION CASE SIZE NO. CHIPS LEADS /SIDE Mechanical Size Range (In.) X7R Max Capacitance (µF) Length (D) Width (E) Tmax (B) 50V 100V 200V 500V P55 5 .715 15 11 5.0 2.5 P04 1 4 0.425 0.440 P54 5 .715 45 32 15 7.5 P03 1 10 1.075 0.500 .185 28 20 9.5 4.7 P53 5 .715 140 100 47 23 P01 1 20 2.075 0.500 .185 50 40 19 9.4 P51 5 .715 250 200 95 46 P02 1 15 1.535 0.870 .185 75 55 25 14 P52 5 .715 370 270 125 70 P06 1 20 2.075 1.350 .185 160 110 50 25 P56 5 .715 800 550 250 125 Partial product line listing, please refer to our website for complete offering including NPO & BX capacitance ranges. . E-SERIES EUROPEAN STYLE X7R CAPACITANCE / VOLTAGE SELECTION CASE SIZE NO. CHIPS LEADS /SIDE Mechanical Size Range (mm) X7R Max Capacitance (µF) Length (D) Width (E) Tmax (B) 50V 100V 200V 500V E54 4 14.8 20 16 10 4.0 E56 4 14.8 64 48 30 13 E21 1 6 16.6 21.6 3.8 30 22 14 6.0 E51 4 14.8 120 88 56 24 E28 1 14 38.2 12.0 3.8 35 25 16 7.0 E58 4 14.8 140 100 64 28 E29 1 14 40.6 24.0 3.8 75 50 35 16 E59 4 14.8 300 200 140 64 Partial product line listing, please refer to our website for complete offering including NPO & BX capacitance ranges. NEW 200°C T-SERIES CAPACITANCE / VOLTAGE SELECTION CASE SIZE NO. CHIPS LEADS /SIDE Mechanical Size Range (In.) Max Capacitance (µF) Length (D) Width (E) Tmax (B) 50V 100V 200V T55 5 .715 5.60 3.30 1.50 T04 1 4 0.425 0.440 .185 2.70 1.50 0.82 T54 5 .715 15.0 8.20 3.90 T03 1 10 1.075 0.500 .185 10.0 5.60 2.70 T53 5 .715 47.0 27.0 12.0 Partial product line listing, please refer to our website for complete offering including NPO capacitance ranges.

24 www.johansondielectrics.com MINI-SWITCH MODE® CAPACITORS JDI’s Mini-Switch Mode ® ceramic capacitors combine the advantages of high capacitance found in tantalum capacitors with very low ESR performance of ceramic capacitors. The “J” and “L” lead configurations replace 1825 and 2225 SMT chips to provide stress relief and prevent cracking due to thermal cycling or mechanical board flexing. Another plus of the J-lead style is that this configuration allows use of the same solder lands as the SMT chips. See the Switch-Mode section for larger values. See also the Technical Notes on soldering and handling and suggested solder lands.  High Capacitance, Small SIze  Low ESR/ESL  Leadframe reduces thermal & mechanical stress due to board flexure and TCE mismatch  DC-DC Converters  Power Supply Input & Output Filters CAPACITANCE SELECTION SIZE CODE EIA CHIP SIZE NPO Max Capacitance (uF) X7R Max Capacitance (uF) 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V

25www.johansondielectrics.com Dimensions Applicable to all sizes: In. mm h ± .010 .070 1.78 c Typ. .100 2.54 p ± .015 .065 1.65 Dimensions Applicable to specifi c sizes: P08 P09 P28 P29 P38 P39 P48 P49 Note: J-Lead and L-Lead options are available on all sizes above CASE SIZE L p W c T h L p W c T h L p W c T h L p W c T h MINI-SWITCH MODE® CAPACITORS HOW TO ORDER - MINI-SWITCH MODE® Part number written: 500P28W395KJ4U

500 P28 W 395 K J 4 U

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 250 = 25 V 500 = 50 V 101 = 100 V 201 = 200 V 501 = 500 V See Chart N = NPO W = X7R 1st two digits are significant; third digit denotes number of zeros. 103 = 0.01 µF 105 = 1.0 µF 106 = 10 uF J = ±5% K= ±10% M = ±20% Z = +80% -20% J = “J” Leads (formed in) L = “L” Leads (formed out) 4 = Unmarked U = T ape and Reel 16mm, 13” Reel NONE = Bulk pack H = High Reliability testing per custom- er requirements S = Special Part Dielectric: NPO X7R Temperature Coefficient: 0 ±30ppm/°C (-55 to +125°C) ±15% (-55 to +125°C) Dissipation Factor: 0.1% max. 2.5% max. Aging None -2.5% per decade hour Insulation Resistance (Min. @ 25°C, WVDC) 1000 ΩF or 100 GΩ, whichever is less 500 ΩF or 50 GΩ, whichever is less Dielectric Strength: For 500V Ratings: 750VDC, 25ºC, 50mA max For 200V Ratings: 2xWVDC, 25ºC, 50mA max For 25-100V Ratings: 2.5xWVDC, 25ºC, 50mA max Test Conditions: 1kHz ±50Hz;1.0±0.2 VRMS Other: See page 35 for additional dielectric specifications.

26 www.johansondielectrics.com CASE SIZE Dimensions Applicable to specifi c sizes: P0A P07 P2A P27 In. mm In. mm In. mm In. mm Dimensions Applicable to all sizes: In. mm h1 Max .059 1.50 c Typ. .100 2.54 p1 Typ. .020 0.50 p2 ± 0.02 .065 1.65 MAXI-CAPTM STACKED CAPACITORS AVAILABLE CAPACITANCE (X7R DIELECTRIC) RATED DC VOLTAGE P0A P07 P2A P27 50V 4.7 µF 10 µF 10 µF 22 µF 100V 2.2 µF 4.7 µF 4.7 µF 10 µF L p2 W c H L p2 W H c Johanson Dielectrics Maxi-cap TM Series of ultra high capaci- tance stacked ceramic capacitors exhibit very low ESR/ESL for high current handling capability in small sizes. The J lead configuration provides good mechanical and thermal stress performance and is similar to the leadframe used in high-rel applications. In addition the J-lead configuration allows direct substitution of SMT chip footprints. The standard range is of- fered in 1 and 2 chip horizontal stacks giving potential board space savings.  High Capacitance, Small SIze  Low ESR/ESL  Leadframe reduces thermal & mechanical stress due to board flexure and TCE mismatch  Green / ROHS Compliant  DC-DC Converters  Power Supply Input & Output Filters

27www.johansondielectrics.com OPERATING RANGE: -55 to +125°C TEMPERATURE COEFFICIENT: X7R, ±15% DISSIPATION FACTOR: 0.020 (2.0%) max. AGING RATE: <2.5% per decade INSULATION RESISTANCE: 25°C IR >100GΩ or 1000 ΩF whichever is less WITHSTANDING VOLTAGE: 2.5 X WVDC for 50 VDC

2.0 X WVDC for 100 VDC

TEST CONDITIONS: 1kHz ±50Hz; 1.0±0.2 VRMS, 25°C MAXI-CAPTM STACKED CAPACITORS Output Filter Capacitor Input Filter Capacitor TYPICAL APPLICATION: DC-DC Converter Input & Output Filtering Controller HOW TO ORDER - MAXI-CAPTM Part number written: 500P07W106MJ4U+RC

500 P07 W 106 M J 4 U +RC

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING ROHS CODE 500 = 50 V 101 = 100 V See Chart W = X7R 1st two digits are significant; third digit denotes number of zeros. 225 = 2.2 µF 106 = 10 uF M = ±20% J = “J” Leads (formed in) 4 = Unmarked U = Embossed Tape 13” Reel per EIA RS481 +RC = RoHS Compliant

28 www.johansondielectrics.com X2Y® SWITCH-MODE CERAMIC CAPACITORS JDI’s new X2Y® Technology Switch-Mode ceramic capacitors exhibit significantly lower ESL making them ideally suited for applications where high frequency filtering performance is critical. Lower ESL performance translates to significant size and weight reduction because lower capacitance values perform as well or better KEY FEATURES  Low ESR / Low ESL, Ideal for SMPS Filtering Applications  Same Package Size as DSCC Drawings 87106 & 88011 MIL-PRF-49470  NPO & X7R Dielectrics, 50 to 500 VDC Ratings  Custom Sizes, Voltages, and Values Available CAPACITANCE / VOLTAGE SELECTION Rated DC Voltage Maximum X7R Capacitance Per Case Size (µF) Y05 Y25 Y35 Y45 Y55 Y04 Y24 Y34 Y44 Y54 Y03 Y23 Y33 Y43 Y53 50V 2.7 5.0 8.0 11 14 8.3 17 25 33 41 29 58 87 116 145

29www.johansondielectrics.com CASE SIZE CASE SIZES Y05 Y25 Y35 Y45 Y55 Y04 Y24 Y34 Y44 Y54 Y03 Y23 Y33 Y43 Y53 C .250 .400 .450 D- .224 .350 .950 D+ .275 .425 1.075 E .300 .440 .500 Pins 3 per side, confi guration: 5 per side, confi guration 10 per side, confi guration All dimensions are in Inches. Tolerances are maximum except: C = ±.025” D- = minimum, D+ = maximum, F = minimum C F .010" ± .002 0.100" TYP 0.055" 0.010 0.020" ± .002 E D 0.250" MIN 0.100" MAX 0 025" MIN B A 0.020" Min. .050" min .070" ± .010 .050" min J-Lead Straight Lead L-Lead GAB G AB G Top View AB Signal (Power) Return (Ground) GG A B Contact the factory for additional connection options for dual signal line EMI filtering applications. X2Y® SWITCH-MODE CERAMIC CAPACITORS HOW TO ORDER - X2Y® SMPS Part number written: 201Y03W475KJ4H

201 Y03 W 475 M J 4 H

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 500 = 50 V 101 = 100 V 201 = 200 V 501 = 500 V See Chart W = X7R 1st two digits are significant; third digit denotes number of zeros. 104 = 0.10 µF 105 = 1.00 µF 475 = 4.70 µF M = ±20% J = “J” Leads (formed in) L = “L” Leads (formed out) N = Straight Lead 4 = Standard 3 = Specified T = Tape and Reel H = High Reliability testing per customer requirements S = Special Part

30 www.johansondielectrics.com SWITCH-MODE RADIAL LEADED CAPACITORS KEY FEATURES  Rated Working Voltages from 25 to 500 VDC  Rugged Epoxy Coating Offers Increased Protection  Hi-Rel Screened Versions Available  Custom Sizes, Voltages, and Values Available ADVANTAGES  Power Supplies  Surge Protection  Voltage Multipliers  Industrial Control Circuits  Data Isolation  Custom Applications CASE SIZE RATED VOLTAGE NPO CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.) In. (mm) H03 W H T S Ld .300 max. .300 max. .200 max. .200 nom. .020 nom. (7.62 max.) (7.62 max.) (5.08 max.) (5.08 nom.) (.510 nom.) 25 VDC .070 µF 703 2.00 µF 205 50 VDC .060 µF 603 1.60 µF 165 100 VDC .050 µF 503 1.10 µF 115 200 VDC .040 µF 403 .730 µF 734 500 VDC .020 µF 203 .250 µF 254 H04 W H T S Ld .400 max. .400 max. .200 max. .200 nom. .020 nom. (10.2 max.) (10.2 max.) (5.08 max.) (5.08 nom.) (.510 nom.) 25 VDC .120 µF 124 5.10 µF 515 50 VDC .100 µF 104 4.10 µF 415 100 VDC .082 µF 823 2.70 µF 275 200 VDC .050 µF 503 1.80 µF 185 500 VDC .030 µF 303 .670 µF 674 H05 W H T S Ld .500 max. .500 max. .200 max. .400 nom. .025 nom. (12.7 max.) (12.7 max.) (5.08 max.) (10.2 nom.) (.635 nom.) 25 VDC .240 µF 244 8.70 µF 875 50 VDC .200 µF 204 7.20 µF 725 100 VDC .180 µF 184 4.80 µF 485 200 VDC .110 µF 114 3.30 µF 335 500 VDC .070 µF 703 1.10 µF 115 H06 W H T S Ld .870 max. .600 max. .200 max. .790 nom. .032 nom. (22.1 max.) (15.2 max.) (5.08 max.) (20.1 nom.) (.813 nom.) 25 VDC .750 µF 754 22.0 µF 226 50 VDC .620 µF 624 17.0 µF 176 100 VDC .560 µF 564 13.0 µF 136 200 VDC .360 µF 364 8.00 µF 805 500 VDC .240 µF 244 2.90 µF 295

31www.johansondielectrics.com W H T S Meniscus Height .050" Max NOTE: Lead lengths are typically 1.25” for orders in bulk packaging. Leads are typically 1.00” for tape and reel packaging. Tape and reel packaging comes in 1000 piece reels. SWITCH-MODE RADIAL LEADED CAPACITORS HOW TO ORDER SWITCH-MODE RADIALS Part number written: 201H07W105KQ4

201 H07 W 105 K Q 4

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 250 = 25 V 500 = 50 V 101 = 100 V 201 = 200 V 501 = 500 V See Chart N = NPO W = X7R 1st two digits are significant; third digit denotes number of zeros. 101 = 100 pF 102 = 1000 pF 103 = 0.01 µF 105 = 1.00 µF J = ± 5% K = ± 10% M = ± 20% Z = +80% -20% Q = Leaded & Encapsulated 4 = Standard 3 = Specified T = Tape and Reel H = High Rel Testing per cus- tomer requirements S = Special Part CASE SIZE RATED VOLTAGE NPO CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.) In. (mm) H07 W H T S Ld 1.10 max. .600 max. .200 max. .980 nom. .032 nom. (27.9 max.) (15.2 max.) (5.08 max.) (24.9 nom.) (.813 nom.) 25 VDC .680 µF 684 35.0 µF 356 50 VDC .560 µF 564 28.0 µF 286 100 VDC .470 µF 474 19.0 µF 196 200 VDC .330 µF 334 13.0 µF 136 500 VDC .200 µF 204 4.60 µF 465 H08 W H T S Ld 1.10 max. .600 max. .350 max. .980 nom. .032 nom. (27.9 max.) (15.2 max.) (8.89 max.) (24.9 nom.) (.813 nom.) 25 VDC 1.20 µF 125 70.0 µF 706 50 VDC 1.10 µF 115 56.0 µF 566 100 VDC .820 µF 824 37.0 µF 376 200 VDC .470 µF 474 26.0 µF 266 500 VDC .300 µF 304 8.70 µF 875 H09 W H T S Ld .670 max. .540 max. .200 max. .575 nom. .025 nom. (17 max.) (13.7 max.) (5.08 max.) (14.6 nom.) (.635 nom.) 25 VDC .450 µF 454 13.0 µF 136 50 VDC .360 µF 364 10.0 µF 106 100 VDC .330 µF 334 7.20 µF 725 200 VDC .240 µF 244 5.00 µF 505 500 VDC .180 µF 184 1.70 µF 175 H10 W H T S Ld .930 max. .720 max. .250 max. .800 nom. .032 nom. (23.6 max.) (18.3 max.) (6.35 max.) (20.3 nom.) (.813 nom.) 25 VDC 1.00 µF 105 38.0 µF 386 50 VDC .900 µF 904 30.0 µF 306 100 VDC .750 µF 754 20.0 µF 206 200 VDC .470 µF 474 14.0 µF 146 500 VDC .300 µF 304 5.80 µF 585

32 www.johansondielectrics.com HIGH VOLTAGE RADIAL LEADED CAPACITORS KEY FEATURES  Rated Working Voltages from 25 to 500 VDC  Rugged Epoxy Coating Offers Increased Protection  Compact MLC Designs Smaller Than Film or Disc NEW 200°C & 250°C Versions Available for Oil & Geophysical Tool, Aircraft Engine Control Applications  DSCC Drawing & Other Screened Versions Available ADVANTAGES  Power Supplies  Surge Protection  Voltage Multipliers  Industrial Control Circuits  Data Isolation  Custom Applications CASE SIZE RATED VOLTAGE NPO CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.) In. (mm) H42 W H T S Ld

0.250 Max

0.220 Max

0.270 Max

0.170 ±0.03 0.025 ±.002 (6.35 Max) (5.59 Max) (6.86 Max) (4.32 ±0.76) (0.64 ±0.05) 500 VDC 4700 pF 472 .150 µF 154 1000 VDC 1500 pF 152 .055 µF 553

2000 VDC 680 pF 681 9000 pF 902

3000 VDC 330 pF 331 2800 pF 282

4000 VDC 150 pF 151 630 pF 631

5000 VDC 100 pF 101 550 pF 531

W H T S Ld

0.370 Max

0.300 Max

0.275 ±0.03 0.025 ±.002 (9.40 Max) (7.62 Max) (6.86 Max) (6.99 ±0.76) (0.64 ±0.05) 500 VDC .022 µF 223 .480 µF 484 1000 VDC 3300 pF 332 .170 µF 174 2000 VDC 1500 pF 152 .025 µF 253 3000 VDC 680 pF 681 .011 µF 113

4000 VDC 330 pF 331 1800 pF 182

5000 VDC 220 pF 221 940 pF 941

W H T S Ld

0.470 Max

0.400 Max

0.320 Max

0.375 ±0.03 0.025 ±.002 (12.0 Max) (10.2 Max) (8.13 Max) (9.53 ±0.76) (0.64 ±0.05) 500 VDC .056 µF 563 1.20 µF 125 1000 VDC 4700 pF 472 .450 µF 454 2000 VDC 3300 pF 332 .094 µF 943 3000 VDC 1500 pF 152 .043 µF 433 4000 VDC 1000 pF 102 .010 µF 103

5000 VDC 470 pF 471 4900 pF 492

W H T S Ld

0.570 Max

0.500 Max

0.475 ±0.03 0.025 ±.002 (14.5 Max) (12.7 Max) (8.13 Max) (12.1 ±0.76) (0.64 ±0.05) 500 VDC .100 µF 104 2.20 µF 225 1000 VDC .010 µF 103 .804 µF 804 2000 VDC 6800 pF 682 .240 µF 244 3000 VDC 3300 pF 332 .073 µF 733 4000 VDC 2200 pF 222 .028 µF 283 5000 VDC 1000 pF 102 .013 µF 133 H66 W H T S Ld

0.670 Max

0.600 Max

0.575 ±0.03 0.025 ±.002 (17.0 Max) (15.2 Max) (8.13 Max) (14.6 ±0.76) (0.64 ±0.05) 500 VDC .150 µF 154 3.30 µF 335 1000 VDC .015 µF 153 1.20 µF 125 2000 VDC .010 µF 103 .440 µF 444 3000 VDC 4700 pF 472 .013 µF 134 4000 VDC 3300 pF 332 .041 µF 413 5000 VDC 2200 pF 222 .020 µF 203

33www.johansondielectrics.com HIGH VOLTAGE RADIAL LEADED CAPACITORS HOW TO ORDER HIGH VOLTAGE RADIALS Part number written: 102H42W101KQ4

102 H42 W 101 K Q 4

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 501 = 500 V 102 = 1000 V 202 = 2000 V 302 = 3000 V 402 = 4000 V 502 = 5000 V* See Chart N = NPO W = X7R 1st two digits are significant; third digit denotes number of zeros. 102 = 1000 pF 103 = 0.01 µF 105 = 1.00 µF J = ± 5% K = ± 10% M = ± 20% Z = +80% -20% Q = Leaded & Encapsulated 4 = Standard 3 = Specified T = Tape and Reel H = High Rel Testing per cus- tomer requirements S = Special Part W H T S Meniscus Height .050" Max NOTE: Lead lengths are typically 1.25” for orders in bulk packaging. Leads are typically 1.00” for tape and reel packaging. Tape and reel packaging comes in 1000 piece reels. T-SERIES 200°C & 250°C Johanson also offers two different series of high temperature radial leaded capacitors for 200°C and 250°C. These components feature rugged pre- molded cases with Hi-Temp epoxy fill. The 200°C line is offered in voltage ratings of 25V to 4KV and maximum capacitance loss of -0.5% in NPO and -45% in X7R. The 250°C line is offered in voltage ratings of 50V & 100V with maximum capacitance loss of -1.5% in NPO and -55% in X7R. Please visit our website for complete component selection & specifications  Oil Well Logging (Downhole)  Geophysical Probes  Jet Engine Controls CASE SIZE RATED VOLTAGE NPO CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.) In. (mm) H70 W H T S Ld

0.770 Max

0.720 Max

0.675 ±0.03 0.025 ±.002 (19.6 Max) (18.3 Max) (8.13 Max) (17.1 ±0.76) (0.64 ±0.05) 500 VDC .220 µF 224 5.70 µF 575 1000 VDC .022 µF 223 2.10 µF 215 2000 VDC .015 µF 153 .620 µF 624 3000 VDC 6800 pF 682 .190 µF 194 4000 VDC 4700 pF 472 .054 µF 543 5000 VDC 3300 pF 332 .026 µF 263 H72 W H T S Ld

0.870 Max

0.750 Max

0.775 ±0.03 0.025 ±.002 (22.1 Max) (19.1 Max) (8.13 Max) (19.7 ±0.76) (0.64 ±0.05) 500 VDC .330 µF 334 7.30 µF 735 1000 VDC .100 µF 104 2.80 µF 285 2000 VDC .056 µF 563 .800 µF 804 3000 VDC .033 µF 333 .250 µF 254 4000 VDC .010 µF 103 .080 µF 803 5000 VDC 6800 pF 682 .041 µF 413 H80 W H T S Ld

1.450 Max

1.375 ±0.03 0.025 ±.002 (36.8 Max) (18.3 Max) (8.13 Max) (34.9 ±0.76) (.064 ±0.05) 500 VDC .470 µF 474 12.0 µF 126 1000 VDC .150 µF 154 4.60 µF 465 2000 VDC .082 µF 823 1.20 µF 125 3000 VDC .047 µF 473 .390 µF 394 4000 VDC .015 µF 153 .130 µF 134 5000 VDC .010 µF 103 .068 µF 683

34 www.johansondielectrics.com CAPACITOR PACKAGING Johanson capacitors are available taped per EIA standard 481. Tape options include 7” and 13” diameter reels. Johanson uses high quality, dust free, punched 8mm paper tape and plastic embossed 8mm tape for thicker MLCCs. Quantity per reel ranges are listed in the tables below and are dependent on chip thickness. 1.97 min. (50.0) .510±.020 (13±0.5) .33+.059-0.0 (8.4+1.5-0.0) .488+.078-0.0 (12.4+2.0-0.0)or .079±.020 (2.0±0.5) 7.0±.079 (178±2.0) 13.0±.079 (330±2.0) .083±.020 (21±0.5) or Bo Cover Tape Embossed Tape 8mm Width; 4mm or 2mm Pitch Sproket Holes Width .315±.008 (8.0±0.2) .157±.004 (4.0±0.1) .059+.004-0.0 (1.5+0.1-0.0) .083 max. (2.1) .012±.004 (0.3±0.1) .067±.004 (1.7±0.1) .138±.002 (3.5±0.05) Ao .079±.002 (2.0±0.05) Feed Direction .055 max.(1.2) Punched Tape Embossed Tape 12mm Width; 8mm or 4mm Pitch Punched Tape Cover Tape .098 max. (2.5) Sproket Holes Width .472±.008 (12.0±0.2) .157±.004 (4.0±0.1) .059+.004-0.0 (1.5+0.1-0.0) .012±.004 (0.3±0.1) .220±.004 (5.5±0.1) Ao .079±.002 (2.0±0.05) Bo .067±.004 (1.7±0.1) P/N 500R07N100JV4E Lot # 010-9999 S.O. # F03456 M.O. # MO12678 7” DIAMETER REEL 13” DIAMETER REEL COMPONENT REEL QTY TAPE TYPE WIDTH / PITCH CODE REEL QTY TAPE TYPE WIDTH / PITCH CODE R05 / 0201 MLCC 15000 Paper 8mm/2mm T N/A N/A N/A R07 / 0402 MLCC 10000 Paper 8mm/2mm T N/A N/A N/A R14 / 0603 MLCC 4000 Paper 8mm/4mm T 10000 Paper 8mm/4mm R R15 / 0805 MLCC 4000 / 3000 Paper / Embossed 8mm/4mm T / E 10000 Paper / Embossed 8mm/4mm R / U R18 / 1206 MLCC 4000 / 3000 Paper / Embossed 8mm/4mm T / E 10000 Paper / Embossed 8mm/4mm R / U S41 / 1210 MLCC 2000 - 4000 Embossed 8mm/4mm E 5000-10000 Embossed 8mm/4mm U R29 / 1808 MLCC 2000 Embossed 12mm/4mm E 5000 - 8000 Embossed 12mm/4mm U R30 / 2211 MLCC 1000 - 2000 Embossed 12mm/4mm E 2000 - 5000 Embossed 12mm/4mm U S43 / 1812 MLCC 500 - 1000 Embossed 12mm/8mm E 3000 - 5000 Embossed 12mm/8mm U S47 / 2220 MLCC 250 - 1000 Embossed 12mm/8mm E 2000 - 5000 Embossed 12mm/8mm U S49 / 1825 MLCC 250 - 1000 Embossed 12mm/8mm E 2000 - 4000 Embossed 12mm/8mm U S48 / 2225 MLCC 250 - 1000 Embossed 12mm/8mm E 2000 - 4000 Embossed 12mm/8mm U X07 / 0402 X2Y 4000 Paper 8mm/2mm T 10000 Paper 8mm/2mm R X14 / 0603 X2Y 4000 Paper 8mm/4mm T 10000 Paper 8mm/4mm R X15 / 0805 X2Y 4000 Embossed 8mm/4mm E 10000 Embossed 8mm/4mm U X18 / 1206 X2Y 3000 - 4000 Embossed 8mm/4mm E 10000 Embossed 8mm/4mm U X41 / 1210 X2Y 2000 - 3000 Embossed 8mm/4mm E X44 / 1410 X2Y 1000 - 2000 Embossed 8mm/4mm E X43 / 1812 X2Y 1000 Embossed 12mm/8mm E Actual reel quantities based on part thickness and tape type. Contact sales for reel quantities of specific part numbers.

35www.johansondielectrics.com PARAMETER NPO X7R X5R TEMPERATURE COEFFICIENT: 0± 30 ppm/°C -55 to +125°C ± 15% -55 to +125°C ± 15% -55 to +85°C -55°C -25 °C0 °C2 5 °C5 0 °C7 5 °C 100 °C 125 °C -80% -60% -40% -20% 20% -55°C -25 °C0 °C2 5 °C5 0 °C7 5 °C 100 °C 125 °C -80% -60% -40% -20% 20% -55°C -25 °C0 °C2 5 °C5 0 °C7 5 °C 100 °C 125 °C -80% -60% -40% -20% 20% DISSIPATION FACTOR: .001 (0.1%) max WVDC ≥ 50 VDC, DF = 2.5% max WVDC = 25 VDC, DF = 3.0% max WVDC = 16 VDC, DF = 3.5% max For Vrated ≥ 50 VDC, DF = 5% max For Vrated ≤ 25 VDC: DF = 10% max AGING: None 2.5% / decade hour 2.5 % / decade hour INSULATION RESISTANCE: 1000ΩF or 100GΩ whichever is less @ 25°C, WVDC 500ΩF or 50GΩ whichever is less @ 25°C, WVDC 100ΩF or 10GΩ whichever is less @ 25°C, WVDC DIELECTRIC STRENGTH: For Vrated = 6 - 200 VDC, DWV = 2.5 X WVDC, 25°C, 50mA max. For Vrated = 201 - 499 VDC, DWV = 2.0 X WVDC, 25°C, 50mA max. For Vrated = 500 - 999 VDC, DWV = 1.5 X WVDC, 25°C, 50mA max. For Vrated = 1000+ VDC, DWV = 1.2 X WVDC, 25°C, 50mA max. DWV = 2.5 X WVDC, 25°C, 50mA max. TEST PARAMETERS: C > 100 pF; 1kHz ±50Hz;1.0±0.2 VRMS NOTES: Tanceram IR = 100 ΩF or 10 GΩ Tanceram DF for Vrated ≥ 50 VDC = 5% max. Tanceram DF for Vrated ≤ 25 VDC, DF = 10% max Part number written: 500R15N101JV4TPART NUMBER BREAKDOWN PLEASE NOTE: Not all combinations of JDI P/Ns are valid. Please refer to the appropriate “How to Order” section for a particu- lar product or contact your Sales Representative if you need assistance.

500 R15 N 101 J V 4 T

VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 6R3 = 6.3 V 100 = 10 V 160 = 16 V 250 = 25 V 500 = 50 V 101 = 100 V 201 = 200 V 251 = 250 V 301 = 300 V 501 = 500 V 631 = 630 V 102 = 1000 V 202 = 2000 V 302 = 3000 V 402 = 4000 V 502 = 5000 V ACJ = 250 VAC R05=0201 R07=0402 R14=0603 R15=0805 A18=0612 R18=1206 S41=1210 R29=1808 R30=2011 S43=1812 S47=2220 S49=1825 S48=2225 X07=0402 X2Y X14=0603 X2Y X15=0805 X2Y X18=1206 X2Y X41=1210 X2Y X44=1410 X2Y X43=1812 X2Y N = NPO W = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros, R = decimal. 100 = 10 pF 102 = 1,000 pF 474 = 0.47 µF 475 = 4.7 µF 106 = 10 µF * B = ± 0.10 pF * C = ± 0.25 pF * D = ± 0.50 pF F = ± 1 % G = ± 2% J = ± 5% K = ± 10% M = ± 20% Z = +80 -20% *Values < 10 pF only V = Nickel Barrier with 100% Tin Plating (Matte) F = Polyterm flexible termination T = SnPb P = PdAg 3 = Special (J) 4 = Unmarked 6 = EIA Code* *Not available on sizes ≥ 0402 E =Embossed 7” T =Punched 7” U =Embossed 13” R =Punched 13” No code = bulk pack Tape specifications conform to EIA RS481 Not all tape styles are available on all parts.

© 2012 Publication JD1201 Printed in USA Your Technology Partner JOHANSON HONG KONG LTD. Unit E, 11/F ., Phase 1, Kaiser Estate

41 Man Yue Street

Hunghom, Kowloon, Hong Kong Tel: (852) 2334 6310  Fax: (852) 2334 8858 High Voltage AC Safety X2Y Tanceram Low Voltage Tin-Lead High Temperature AC Power Feedthru Filter Low ESL SMPS Radial Leaded CORPORATE HEADQUARTERS

15191 Bledsoe Street

Sylmar, California 91342 Tel (818) 364-9800  FAX (818) 364-6100 http://www.johansondielectrics.com