5017A EMCORE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

Internal Delay Spool 110 m-sec Temperature Range -25 - +65 °C Frequency Range 0.1 - 10 - 18 GHz See following pages for complete specifications and conditions.

DATA SHEET | JANUARY 2, 2008 For more information on this and other products: Contact Sales at Emcore 626-293-3400, or visit www.emcore.com. 5017-Series Delay Line Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Condition Min Max Units Operating Temperature Range of Baseplate: TOP continuous -55 +75 °C Storage Temperature TSTG - -55 +85 °C RF Input Power PIN 60 seconds - 20 dBm ESD, module - HBM: R = 1500 Ohm, C = 100 pF -500 500 V TEC Current, module ITEC continuous -1.9 1.9 A RF Characteristics Parameter 5017A 5017B 5017C 5017D 5017E 5017F 5017G 5017H Unit Upper Band Edge Frequency 4 10 15 18 4 10 15 18 GHz Lower Band Edge Frequency 0.1 0.1 GHz Noise Figure 49 54 64 69 59 64 74 79 dB Max Delay Time 8 110 m-sec Insertion Loss 28 36 50 56 dB Input / Output Return Loss 9 6 9 6 dB Input Third Order Intercept +30 +25 +30 +25 dBm Impedance 50 W Input 1 dB Compression +20 dBm Triple Transit Response <-75 dBc Connector Options Parameter Specifications Model Number 5017A/E 5017B/F 5017C/G 5017D/H RF Connector SMA (f)

DATA SHEET | JANUARY 2, 2008 EMCORE 5017-Series Delay Line dc Interface Characteristics Pin Number Min Typ Max Max Ripple Current 1 14V 15V 16V 100 mV p-p 0.3 A max 2 4.75V 5V 5.5V 200 mV p-p 1.6 A max Outline Diagram Model 5017A/B/C/B Dimensions are in inches. 0.19 diameter 0.125 6.75 0.25 6.00 5.50 6.375

2.38 RF IN RF OUT

DB 9 M 1.117

DATA SHEET | JANUARY 2, 2008 For more information on this and other products: Contact Sales at Emcore 626-293-3400, or visit www.emcore.com. 5017-Series Delay Line Outline Diagram 5017E/F/G/H Dimensions are in inches. 0.19” diameter 0.125 0.25 6.00 5.50 6.75 RF IN 6.375 Dimension “X” 35 m-Sec Max: 4.38 inches 60 m-Sec Max: 5.38 inches 80m-Sec Max: 6.38 inches 110 m-Sec Max: 7.88 inches X RF OUT POWER ON DB 9 M 1.117 2.38

DATA SHEET | JANUARY 2, 2008 ORTEL, A division of EMCORE 5017-Series Delay Line Pin/Package Information Nine-Pin D-sub Connector Pin Description 1 +15 Vdc 2 +5 Vdc 3 NC

4 Power Ground

5 Reference Ground

6 Laser Photodiode Current Monitor

7 Received Optical Power

8 Laser Current Monitor

9 Laser Over-temperature Alarm1

1: Open collector outputs Ordering Options Delay Line (For example, 5017A-0060) Ordering Options Delay Line (For example, 5017E-0850) 5017 n- XXXX Frequency Delay (Internal) A 0.1 GHz to 4 GHz 8 m-sec max B 0.1 GHz to 10 GHz C 0.1 GHz to 15 GHz D 0.1 GHz to 18 GHz 5017 n- XXXX Frequency Delay (External) E 0.1 GHz to 4 GHz 110 m-sec max F 0.1 GHz to 10 GHz G 0.1 GHz to 15 GHz H 0.1 GHz to 18 GHz Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation. DS.5017 RF Delay Lines Copyright 2008. EMCORE Corporation EMCORE Corporation

2015 West Chestnut Street

Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3423 www.emcore.com Front Panel LEDs Power on dc Monitor Voltages Laser Photodiode current, pin6 o 1V/100mA ±2% accuracy (into 1 MW load). Proportional to laser power at beginning of fiber. Photodiode current, pin7 o 1V/mA ±2% accuracy (into 1 MW load). Proportional to photodiode input power end of fiber. Laser dc current, pin 8: o 1V/100mA ±2% accuracy (into 1 MW load). Alarm Circuits The alarms are open-collector outputs capable 20 mA when active and with standing +15 VDC when off. Laser over temperature alarm, pin 9 o Laser Temperature. This alarm is ON (sinks current) if the laser substrate temperature is more than 2oC higher than the factory setpoint. The alarm is not activated if the temperature is LOWER than the setpoint. Delay Time The delay time is shown as “XXXX”. X (hundreds) X (tens) X (ones) X (tenths) A 5017C with a delay time of 15.5 m-sec would be shown as 5017C-0155