5108 POMONA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. DIP Clips® for 8-14-16-20 Pin Clips USA: Sales: 800-490-2361 Fax: 425-446-5844 Technical Support: technicalsupport@pomonatest.com Europe: 31-(0) 40 2675 150 International : 425-446-5500 Where to Buy: www.pomonaelectronics.com Rev: 100 D1094200 Page 1 of 1 Pomona DIP Clip® test clips are designed for testin g dual-in-line IC packages on PC boards. These dev ices incorporate many built-in features that assure a positive electrical connection as well as hands free testing.
- Contacts (.040" wide on lower end) are serrated for the best electrical contact.
- .025" X .028" serrated test points on upper end will accept wire wraps or mini test clips.
- Molded barriers between contacts allows live board connections without accidental shorting of contacts.
- Can also be used as an insertion tool for DIPs.
- Contacts are spring tempered Nickel Silver or Gold Plated Beryllium Copper alloy. Oxide penetrating c lips have a roughened stainless steel surface treatment.
- Open back option allows probing on the chip leads while clip is attached. Pomona's DIP Clip® test clips are perfect for emulation, field service, failure analysis, and for use with logic analyzers. Model# Size Pins Clip Width Type Contact Material and Plating 5108 8 0.43in (10.9mm) Standard DIP Clip® Be-Cu, Go ld Plate 5208 8 0.43in (10.9mm) Open Back DIP Clip® Be-Cu, G old Plate 5014 14 0.72in (18.3mm) Standard DIP Clip® Nickel S ilver 5114 14 0.72in (18.3mm) Open Back DIP Clip® Nickel Silver 3916A 16 0.83in (21.1mm) Standard DIP Clip® Nickel Silver 5220 20 1.03in (26.2mm) Open Back DIP Clip® Be-Cu, Gold Plate