5011 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

Applications

  • Hermetic glass seal
  • Ideal for surface and immersion sensing
  • Multiple mounting and terminations available
  • Case isolated and case grounded versions
  • Printed circuit board protections
  • Air or water cooled engines and transmissions
  • Fluid sensing Contact Ratings Cycles Voltage Amps Case Type 100,000 120 3 (resistive) Ground / Insolated case 100,000 120 2 (inductive) Isolated case 100,000 32 3 (resistive) Grounded case Contact Operations Operating Temperature Temperature Tolerance Long Term Exposure Limit Dielectric Strength Insulated Resistance Thermal Shock Materials Either close on rise (make) or open on rise (break), SPST (Single Pole, Single Throw) +140ºF to 480ºF (+60ºC to 249ºC) Standard of ±5°F with nominal operating temperature settings in 5°F increments

1000 Vrms 60Hz (isolated case) terminals to case (contacts open)

MIL-STD-202, Method 107 Test Condition B Cold-rolled steel, nickel plated enclosure with a glass seal. Applications up to 300°F have a Mylar® sleeve with an epoxy fill, those above 300°F have a Nomex® sleeve and a high temperature epoxy fill. *Exposure limited should be kept to within 100°F of the operating temperature. Consult factory if conditions require otherwise. Note: Please consult the factory if lead wire/terminal exposure temperatures are expected to exceed 220°F. (Refer to inside notes B & C )

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. CONTACT OPERATION TERMINAL SELECTION M N P Z Same as terminal selection “L” Except 2 Leads 48.00 ± 1.00 (1219.20 ± 25.40) See note 1 for lead specifications Special Requirements Customer to Specify Same as terminal selection “L” Except 2 Leads 24.00 ± 1.00 (609.60 ± 25.40) See note 1 for lead specifications Same as terminal selection “L” Except 2 Leads 12.00 ± 1.00 (304.80 ± 25.40) See note 1 for lead specifications Quick Connect Terminal, Grounded Case Only 0.545 (13.84) Mounting REF 1.062 (26.97) 0.250 (6.35) REF Quick Connect 0.625 (15.88) Encapsulated

2 Pan Head Screw Terminals, #8-32

0.620 (15.75) Encapsulated Mounting REF 0.937 (23.80) REF #8-32 Pan Head Screw (x2) #7 Lock Washer (x2) (Packaged in plastic bag) 45º ± 10º 0.715 (18.16)

2 QC Terminals, Isolated Case Only

0.620 (15.75) Mounting REF 1.062 (26.97) 0.250 (6.35) REF

2 Quick Connects

0.715 (18.16) Encapsulated

2 Leads, Isolated Case Only

See note 1 for lead specifications 0.620 (15.75) Encapsulated Mounting REF .250 (6.35) Strip 2 Leads 6.000 ± 1.00 (152.40 ± 25.40) 0.715 (18.16) Encapsulated KJDA L Pan Head Screw Terminal, #8-32 Grounded Case Only 0.545 (13.84) Encapsulated Mounting REF 0.937 (23.80) REF #8-32 Pan Head Screw #7 Lock Washer (Packaged in plastic bag) 45º ± 10º 0.625 (15.88) TEMPERATURE CODES AND TOLERANCE Temperature Scale Fahrenheit Celsius Fahrenheit Celsius Fahrenheit Celsius Top Temperature Settings 140˚F to 250˚F 60˚C to 121.1˚C 251˚F to 400˚F 121.7˚C to 204.4˚C 401˚F to 480˚F 205˚C to 248.9˚C Standard Top Temperature Tolerance (code) Nominal Temperature Differential Note

  • The standard tolerance for the top temperature is based on the temperature range the top temperature falls in, please refer to the temperature setting chart, and select the appropriate code for a standard top temperature tolerance
  • For bottom temperature tolerance a “Y” = minimum trip, which indicates the “reset” trip occurs at or above the lower temperature set point. Tolerance Code A C N Y ( Bottom Temp Only) Note
  • Select any temperature in the range of 140°F to 480°F. Standard choices fall on the 5°F increments, for example 140°F, 145°F, 150°F, 155° F... up to 475°F or 480°F
  • Specify the °F temperature in the part numbering scheme as a three digit code without the ‘°F’ in the part numbe r. For example, for 200°F, put in code ‘200’
  • Bottom Temperature in °F” equals the “Top Temperature in °F” minus “Nominal Differential in °F”. For example 310°F - 30°F = 280°F CODE DESCRIPTION O Letter “O” = Open on Rise C Letter “C” = Close on Rise

www.sensata.com Page 3 Copyright © 2018 Sensata Technologies, Inc. MOUNTING AND ENCLOSURE SELECTION 1. The standard lead wire (materials) for different temperature ranges are as follows: A. Up to 220°F (104.4°C) = # 18 AWG standed. UL Style 1015/CSA approved. (PVC insulation, color black) B. 221°F to 350°F (105°C to 176.6°C) = #18 AWG stranded. UL Style 1199/CSA approved. (Teflon® TFE insulation, color black) C. 351°F (177.2°C) and above = #18 AWG stranded. UL style 5288/CSA approved. (Composite of Teflon®, ceramic + glass braid, color brown) 2. For mounting code “C” only, encapsulation above the hex is omitted and terminal height is reduced by the amount of encapsulation. 3. The marking information on each thermostat will include either the name Sensata, contact operation (CLR) close on rise, (OPR) open on rise, top temperature and date code. *If you require either of the terminal selections “RR” or “SS”, it will require the use of both position 3 (terminal selection). and position 4 (mounting and enclosure selection) in your part number building code. For example: C11RR285C-250Y 0.656 (16.66) 0.225 (5.72) 0.250 ± .020 (6.35 ± .51) 0.687 ± .020 (17.45 ± .51) Terminal Encapsulation Omitted (See Note 2) 0.875 (22.23) DIA 0.750 (19.05) 0.875 (22.23) (3.56 ) DIA 2 mounting holes Grounded Case Only 1.208 (30.68) + 0.13 – 0.00 (.140 ) + 0.05 – 0.00 0.011 (0.21) 0.750 (19.05) 1.625 (41.28) (4.75) by 2 mounting holes 2.030 (51.56) (.187) (6.35) (.250) 0.015 (0.38) 0.750 (19.05) 1.593 (40.46) (4.75) TYP 2 mounting holes REF2.005 (50.93) .187 0.015 (0.38) 1/4-20 UNC-2A Thread 0.375 (9.53) 0.225 (5.72) 0.710 (18.03) Isolated or Grounded Case REF REF 0.750 (19.05) 0.356 (9.04) 0.750 (19.05) RAD 0.640 (16.26) REF 0.343 (8.71) RAD Q.C. Terminal 0.385 ± .005 (9.78 ± .13) DIA REF1.449 (36.80) 0.468 (11.89) 0.375 ± .015 (9.53 ± .38) 0.625 (15.88) 0.125 (3.18) 0.166 ± .010 (4.22 ± .25) 0.516 (13.11) 0.250 (6.35) C E F G SS *RR *H

+1 (888) 438 2214 sensors@sensata.com Europe, Middle East & Africa +31 (74) 357 8156 temperature-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82-10-9218-1179 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Page 4 Rev:02/12/18 www.sensata.com CONTACT US Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. ORDERING OPTIONS Example : C11AD285C-250Y C, E, F, G, H, RR*, SS* See Mounting and Enclosure Selection Table Top Temperature (in °F) Top Temperature Tolerance Code Bottom Temperature (in °F) Bottom Temperature Tolerance Code See Temperature Codes and Tolerance Table (Available in Increments of 5°F) A, C, N See Temperature Codes and Tolerance Table See Temperature Codes and Tolerance Table A, C, N, Y See Temperature Codes and Tolerance Table Contact Operation Family Terminal Selection Mounting & Enclosure C 11 8 55 0 YA F 2 2C - Close contacts on temperature rise, 5011 series, grounded case 8-32” screw terminal, mounting bracket with two 0.187” x 0.250” mounting slots, 285°F top temperature with a ±10°F standard top tolerance and a standard 35°F differential between top and bottom temperature for temperature range of 251°F to 400°F, differential helps calculate a bottom temperature of 250°F with a standard minimum reset for contacts to close at or above the bottom temperature set point. O, C See Contact Operation Table

5011 Series

A, D, J, K, L, M, N, P , Z See Terminal Selection Table WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

  • The product’s side panels may be hot, allow the product to cool before touching
  • Follow proper mounting instructions including torque values
  • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARCH FLASH
  • Disconnect all power before installing or working with this equipment
  • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury