500 ADVANCEDENERGY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
©2021 Advanced Energy Industries, Inc. The UltraVolt MPM series of proportional DC-to-DC converters provide compact, general purpose high voltage power. PRODUCT HIGHLIGHTS Unregulated proportional control outputs ranging from 100 to 500 VDC maximum Single output: positive and negative polarity models 1.5 W maximum output power 12 or 24 VDC input Output ripple performance < 0.5% (to < 0.05% with optional shield) Temperature coefficient < 300 ppm/°C PCB-mount Reversed polarity and intermittent short-circuit protection Optional 100 VDC isolation between input and high voltage output Available shielded case to guard against external radiated emissions CE mark (LVD and RoHS) TYPICAL APPLICATIONS DC to high voltage DC bias supplies for general purpose uses Ink-jet printers and electrostatic separators Rail supplies for PMT/APD detectors and Geiger-Muller tubes Electron-beam deflectors and focusing optics Maximum Output Voltage 100, 200, 300, or 500 VDC Maximum Output Power 1.5 W Type Single Output Ripple < 0.5% Control Interface Proportional Temperature Coefficient < 300 ppm/°C AT A GLANCE ULTRAVOLT MPM 100 TO 500 SERIES COMPACT DC TO HIGH VOLTAGE DC CONVERTERS
2 advanced-energy.com ULTRAVOLT MPM 100 TO 500 SERIES ELECTRICAL SPECIFICATIONS Model 1 100 Series 200 Series High Voltage Output Range (Proportional, Positive or Negative) 17 to 100 VDC 34 to 200 VDC High Voltage Outputs Single Single Input Voltage (VDC, Nominal) 12 VDC 24 VDC 12 VDC 24 VDC Power Output (Watts, Nominal) 1.5 W 1.5 W DC Input Vin (Input Voltage) Range VDC (positive polarity only) 0 to 12 0 to 24 0 to 12 0 to 24 Vin (Nominal) VDC 2 to 12 4 to 24 2 to 12 4 to 24 lin (Input Current, Nominal) A @ 100% HVout, 100% LOAD < 0.25 < 0.13 < 0.25 < 0.13 A @ 100% HVout, 0% LOAD < 0.04 < 0.04 DC Output HVout (Output Voltage) VDC (positive polarity models = +HVout) +17 to +100 +17 to +100 +34 to +200 +34 to +200 VDC (negative polarity models = -HVout) -17 to -100 -17 to -100 -34 to -200 -34 to -200 Iout (Output Current) mA (max) @ 0 to 100% HVout, Vin (nominal) 15 7.5 Pout (Output Power) Watts (max) 1.5 1.5 Ripple 2,3 % (% with S option) < 0.5% (< 0.25%) < 0.5% (< 0.05%) ppm (ppm with S option) < 5000 (< 2500) < 5000 (< 500) Vpp (Vpp with S option) < 0.5 (< 0.25) < 1 (< 0.1) Model 1 300 Series 500 Series High Voltage Output Range (Proportional, Positive or Negative) 50 to 300 VDC 84 to 500 VDC High Voltage Outputs Single Single Input Voltage (VDC, Nominal) 12 VDC 24 VDC 12 VDC 24 VDC Power Output (Watts, Nominal) 1.5 W 1.5 W DC Input Vin (Input Voltage) Range VDC (positive polarity only) 0 to 12 0 to 24 0 to 12 0 to 24 Vin (Nominal) VDC 2 to 12 4 to 24 2 to 12 4 to 24 lin (Input Current, Nominal) A @ 100% HVout, 100% LOAD < 0.25 < 0.13 < 0.25 < 0 .13 A @ 100% HVout, 0% LOAD < 0.04 < 0.04 DC Output HVout (Output Voltage) VDC (positive polarity models = +HVout) +50 to +300 +50 to +300 +84 to +500 +84 to +500 VDC (negative polarity models = -HVout) -50 to -300 -50 to -300 -84 to -500 -84 to -500 Iout (Output Current) mA (max) @ 0 to 100% HVout, Vin (nominal) 5 3 Pout (Output Power) Watts (max) 1.5 1.5 Ripple 2, 3 % (% with S option) < 0.5% (< 0.05%) < 0.5% (< 0.05%) ppm (ppm with S option) < 5000 (< 500) < 5000 (< 500) Vpp (Vpp with S option) < 1.5 (< 0.15) < 2.5 (< 0.25) 1 Standard product specifications shown unless noted. For 1000 to 3000 VDC HVout ranges, see MPM 1K to 3K series datasheet. 2 Nominal ripple measured @ 100% HVout, 100% LOAD into 300 pf bypass capacitor. 3 % = percent @ 100% HVout; ppm = parts per million @ 100% HVout; Vpp = VDC peak to peak @ 100% HVout.
advanced-energy.com 3 ULTRAVOLT MPM 100 TO 500 SERIES ELECTRICAL SPECIFICATIONS (CONTINUED) Stability and Regulation Stability 0.1% (1000 ppm) @ 100% HVout (after 30 min warmup interval) 0.1% (1000 ppm) @ 100% HVout (per 8 h interval) Line Regulation Unregulated (proportional control) Static Load Regulation Typically < 10% @ 100% HVout, 0 to 100% LOAD. Max < 20% Temperature Coefficient 300 ppm/°C (over operating temperature range) Power-On Rise Time < 50 msec @ 100% LOAD, < 50 msec @ 0% LOAD Contact factory for other options. Environmental Operating Temperature Range -10 to 60°C (14 to 140°F) ambient temperature Storage -40 to 85°C (-40 to 185°F) ambient temperature Humidity 0 to 95% RH, non-condensing Altitude Sea level to 2000 m (6500 ft) Regulatory Certifications CE mark (LVD and RoHS)
4 advanced-energy.com ULTRAVOLT MPM 100 TO 500 SERIES MECHANICAL SPECIFICATIONS H1 H H H1 3 14 Shield Pin 3 1 L W L W Shielded (S Option) Standard Configuration HVret (I Option) HVout Back ViewSide View Dimensions Standard Shielded Key Description 1, 2, 3 mm in mm in L Overall Length 38.1 1.50 39.4 1.55 L1 Case Exterior to Pin 1 (Pin 2) 4.1 0.16 4.8 0.19 L3 Pin 1 to Pin 3 27.9 1.10 27.9 1.10 L4 Pin 1 to Pin 4 (I Option) 10.7 0.4 10.7 0.42 L5 Case Exterior to Shield Ground (S Option) 38.9 1.53 W Overall Width 38.1 1.50 39.4 1.55 W1 Case Exterior to Pin 1 (Pin 3) 2.5 0.10 3.0 0.12 W2 Pin 1 to Pin 2 30.5 1.20 30.5 1.20 W4 Pin 1 to Pin 4 (I Option) 1.3 0.05 1.3 0.05 W5 Pin 1 to Shield Ground (S Option) 38.1 1.50 H Case Height (Max) 20.1 0.79 21.6 0.85 H1 Case Exterior to Pin 1 Tip 8.6 0.34 8.1 0.32 Volumes and Weights Standard Shielded cm in cm in Volume (Module Body Only) 29.1 1.8 33.5 2.0 g oz g oz Weight 60 2.1 80 2.8 1 Approximate nominal dimensions and weights for configurations shown. 3 Refer to outline drawings and 3D models for detailed information. Construction Standard Case Injection-molded plastic (Diallyl Phthalate, DAP , per ASTM-D-5948) Optional Shield Five-sided tinned metal case with PCB (S Option) Labels Static-dissipative polyester Cooling Natural convection and conduction Encapsulation Silicone-based RTV Pins Gold/nickel over brass (D = 1 mm, 0.040 in) Shield Ground Tinned metal (0.7 x 0.5 mm, 0.028 x 0.02 in)
advanced-energy.com 5 ULTRAVOLT MPM 100 TO 500 SERIES INTERFACE The MPM series’ high voltage output varies proportionately with input voltage. An optional interface isolates input from high voltage output, up to a maximum of 100 VDC. The shield — which helps protect the module from external radiated emissions — should be connected to ground. Vin Gnd F Pin All impedances ±1% C 3HVout HVret Ro Example Interface Circuit Shield (S Option) LOAD Iout Vin Gnd F Pin All impedances ±1% C HVout HVret Ro Example Interface Circuit Shield (S Option) LOAD Iout
100 VDC Isolation
(Max) Isolated Interface (I Option, 100 VDC Max) Pin Label Type Description
1 Gnd Ground DC Input Power Ground
2 Vin Input DC Input Power
3 HVout Output High Voltage Output
4 HVret Ground High Voltage Return 1
Shield Ground Shield Ground
1 For proper operation and safety, always route HVret signal through HVret
connection. Standard Interface (Non-isolated) Pin Label Type Description Shield Ground Shield Ground
6 advanced-energy.com ULTRAVOLT MPM 100 TO 500 SERIES INTERFACE CONTROL PARAMETERS Model 100 Series 200 Series High Voltage Output Range (Proportional, Positive or Negative) 17 to 100 VDC 34 to 200 VDC Input Voltage (VDC, Max) 12 VDC 24 VDC 12 VDC 24 VDC Power Output (Watts, Max) 1.5 W 1.5 W Standard Interface (Proportional Voltage Control) Scale Factors 1, 2, 3 Positive Polarity Models SVp (V/V) where HVout Control = SVp x Vin 8.33 4.17 16.7 8.33 Negative Polarity Models SVp (V/V) where HVout Control = SVp x Vin -8.33 -4.17 -16.7 -8.33 Other Interface Values Impedances 3 Ro (HVout impedance, ±1%) 2.2 MΩ 2.2 MΩ Capacitance 3 C (@ 50 VDC ±10%, ⅛ W, max) 4.7 µF 4.7 µF Model 300 Series 500 Series High Voltage Output Range (Proportional, Positive or Negative) 50 to 300 VDC 84 to 500 VDC Input Voltage (VDC, Max) 12 VDC 24 VDC 12 VDC 24 VDC Power Output (Watts, Max) 1.5 W 1.5 W Standard Interface (Proportional Voltage Control) Scale Factors 1, 2, 3 Positive Polarity Models SVp (V/V) where HVout Control = SVp x Vin 25 12.5 41.7 20.8 Negative Polarity Models SVp (V/V) where HVout Control = SVp x Vin -25 -12.5 -41.7 -20.8 Other Interface Values Impedances 3 Ro (HVout impedance, ±1%) 2.2 MΩ 2.2 MΩ Capacitance 3 C (@ 50 VDC = ±10%, 1/8 W, max) 4.7 µF 4.7 µF 1 For 12 VDC models, Vin (nominal) varies from 2 to 12 VDC. For 24 VDC models, Vin (nominal) varies from 4 to 24 VDC. Contact factory about operation below these levels. 2 SVp can vary by ±10% typical (±20% max) from 17 to 100% HVout @ 100% LOAD. 3 See interface schematic for definition. STANDARD OPTIONS The MPM series can be factory configured with several standard options that adapt its performance to specialized application requirements. Option Description S Six-sided shielded case consisting of tin-plated metal case and mating PCB that provides additional protection from external radiated emissions. I Isolation up to 100 VDC maximum between input and high voltage output. Permits use of an external resistor between HVret and ground to sense current, or an external capacitor to reduce common mode ripple.
ORDERING INFORMATION
advanced-energy.com 7 ULTRAVOLT MPM 100 TO 500 SERIES STANDARD CONFIGURATION OPTIONS Electrical Performance Standard Features Shielded Case (6 Sides) Module Isolation (100 VDC Max)Standard Part Number of High Voltage Outputs High Voltage Output Range (HVout VDC, Proportional to Vin) Maximum Input Voltage (Vin, VDC) High Voltage Output Polarity High Voltage Output Power (Pout, Watts) Proporational Control Interface Plastic Case (DAP) Through-hole PCB-mount Reversed Polarity Input and Intermittent Short-circuit Protec tion 300 ppm/°C Temperature Coefficient
100 Series
MPM12-100P 1 +17 to +100 12 Pos 1.5 Included S I MPM12-100N 1 -17 to -100 12 Neg 1.5 Included S I MPM24-100P 1 +17 to +100 24 Pos 1.5 Included S I MPM24-100N 1 -17 to -100 24 Neg 1.5 Included S I
200 Series
MPM12-200P 1 +34 to +200 12 Pos 1.5 Included S I MPM12-200N 1 -34 to -200 12 Neg 1.5 Included S I MPM24-200P 1 +34 to +200 24 Pos 1.5 Included S I MPM24-200N 1 -34 to -200 24 Neg 1.5 Included S I
300 Series
MPM12-300P 1 +50 to +300 12 Pos 1.5 Included S I MPM12-300N 1 -50 to -300 12 Neg 1.5 Included S I MPM24-300P 1 +50 to +300 24 Pos 1.5 Included S I MPM24-300N 1 -50 to -300 24 Neg 1.5 Included S I
500 Series
MPM12-500P 1 +84 to +500 12 Pos 1.5 Included S I MPM12-500N 1 -84 to -500 12 Neg 1.5 Included S I MPM24-500P 1 +84 to +500 24 Pos 1.5 Included S I MPM24-500N 1 -84 to -500 24 Neg 1.5 Included S I MPM24-500NSI Options Output Polarity Model Input Voltage Output Voltage Standard Part
For international contact information, visit advanced-energy .com. uv-ca@aei.com +1.970.221.0108 ABOUT ADVANCED ENERGY Since 1981, UltraVolt® — now part of the Advanced Energy (AE) family — has perfected how power performs for its customers. For both end users and OEMs, AE’s comprehensive portfolio of standard and custom high voltage components precisely match system specifications to deliver unparalleled energy, quality, and performance. Through close customer collaboration, design expertise, application insight, and world-class support, AE creates successful partnerships and enables customers to push the boundaries of innovation and stay ahead of evolving market needs. PRECISION | POWER | PERFORMANCE Read and understand all documentation before you install, operate, or maintain Advanced Energy high voltage power supplies. Follow all safety instructions and precautions to protect against property damage and serious or possibly fatal bodily injury. Never defeat safety interlocks or grounds. CAUTION: High Voltage Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE®, and UltraVolt® are U.S. trademarks of Advanced Energy Industries, Inc. DS TITLE ENG-HV-MPM-100V500V-235-01 3.21