ACM12V-172-2PL-TL00 TDK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20210705 (1/4) cmf_automotive_power_acm12v_en.fm EMC Components Common mode filters Automotive power line (for power train/safety) ACM-V series ACM12V type
FEATURES
Exclusive square type closed magn etic core designed as an exclusive core is used, so it can be small while maintaining the same fea- tures. Low profile design makes it optimal for surface mounting. Excellent impedance characteristics, making it great for suppressing common mode noise. Maximum 8A can be used in 125°C environments. Covers a wide operating temperature range from –40 to +125°C. Operating temperature range: –40 to +125°C (Does not include self-heating.) Compliant with AEC-Q200 APPLICATION Measures against common mode nois e in power lines for various DC power lines, mu ltimedia devices, and various electronic device s, including automotive power trains and safety applications. PART NUMBER CONSTRUCTION CHARACTERISTICS SPECIFICATION TABLE Measurement equipment ˎEquivalent measurement equipment may be used. ACM 12V - 701 - 2PL - TL 00 Series name L×W×H dimensions Impedance Number of lines Packaging style Internal code12.0×11.0×6.0 mm () at 100MHz Common mode impedance [at 100MHz] DC resistance Rated current Rated voltage Insulation resistance Part No. 500 700 6 8 80 10 ACM12V-701-2PL-TL00 1200 1700 12 4.8 80 10 ACM12V-172-2PL-TL00 Measurement item Product No. Manufacturer Common mode impedance 4991A Keysight Technologies DC resistance 4338A Keysight Technologies Insulation resistance 4339A Keysight Technologies REACH SVHC-Free Lead FreeRoHS Pb AEC-Q200
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20210705 (2/4) cmf_automotive_power_acm12v_en.fm EMC Components ACM12V type IMPEDANCE VS. FREQUENCY CHARACTERISTICS Measurement equipment ˎEquivalent measurement equipment may be used. Product No. Manufacturer 4991A Keysight Technologies 1 10 100 1000 10000 1000 100 Frequency (MHz) Impedance (Ω)
172 Common mode
172 Differential mode
701 Common mode
701 Differential mode
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20210705 (3/4) cmf_automotive_power_acm12v_en.fm EMC Components ACM12V type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN CIRCUIT DIAGRAM RECOMMENDED REFLOW PROFILE PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS PACKAGE QUANTITY TEMPERATURE RANGE, INDIVIDUAL WEIGHT The operating temperature range of this product does not include self- heating. The product can be used up to 150°C including self-heating. When using the product in an environment at 125°C, use the product within the current range shown in the table on page 1/4 of this catalog. The storage temperature range is for after the assembly. Dimensions in mm 12.0±0.3 11.0±0.36.0max. (7.4) 2.3±0.2 2.3±0.2 2.7±0.2 2.7±0.2 2.5±0.2 Dimensions in mm 5.2 7.6typ. 14.0 2.7 No polarity Natural cooling 5s max. 60 to 120s Preheating 10 to 30s Soldering 230°C 230°C 245°C 180°C 150°C Time Peak Temperature Type A B K Package quantity 500 pcs/reel Operating temperature range Storage temperature range Individual weight –40 to +125 °C –40 to +125 °C 2.3 g ø13.0±0.2 (ø21) ø100±1 2.0±0.5 ø330±2 Dimensions in mm 29.5±1.0 25.5±1.0 0.5±0.05 K B 1.75±0.1 24±0.3 4±0.12±0.1 16±0.1A 11.5±0.1 Dimensions in mm Sprocket holeø1.55±0.05 160min. Taping Drawing direction 500 to 560min. 440min. Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20210705 (4/4) cmf_automotive_power_acm12v_en.fm EMC Components REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% R H or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products described in this catalog are intended to be installed in automobiles or automotive electronic equipment (AV equip ment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equip- ment, measurement equipment, industrial robots) and to be used in automobiles (including the case where the said automotive product is mounted in a vehicle) or standard applications as general electronic equipment in automotive applications or standard applic ations as general electronic equipment in automotive applications in accordance with the scope and conditions described in this specification, while the said automotive or general electronic equipment including the said product is intended to be used in the usual operat ion and usage methods, respectively. Other than automotive or automotive products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or wh ose failure, malfunction or defect could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applicati ons below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng pro- tection circuit/device or providing backup circuits in your equipment. REMINDERS