4930200 THEBEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Item no.: 4930200 Subject to technical changes and misprints additional information at: www.theben.de/product/4930200 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. KNX Actuators DIN rail and gateways
Description
- 8-way switching or 4-way blind actuator MIX2 - Base module MIX2 - Can be upgraded to maximum of 24 channels - Flexible channel function selection as switching actuator or for controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps - Up to two extension modules MIX or MIX2 can be connected to one base module - Device and KNX bus module can be swapped independently of each other - Removable KNX bus module enables devices to be changed without reprogramming - Manual set-up and use of actuator is possible without KNX bus module - LED switching status display for each channel - Manual operation on device (even without bus connection) Technical data RMG 8 T KNX Operating voltage KNX Bus voltage, ≤4 mA Operating voltage 110 V AC - 240 V AC, 50 Hz - 60 Hz Frequency 50 - 60 Hz Stand-by consumption ~0.3 W Capacity loss max. 6.4 W Installation type DIN rail Width 4 modules Type of connection Terminal screws | Bus connection: KNX bus terminal Max. cable cross section Solid wire: 0.5 mm² (Ø 0.8) to 6 mm² | Stranded wire with end sleeve: 0.5 mm² to 4 mm² Number of channels 8 Type of contact NO contact, 16 A, 3 A Opening width < 3 mm Incandescent/halogen lamp load 2000 W Fluorescent lamp load (conventional) parallel-corrected
1300 W (140 µF)
Fluorescent lamp load (conventional) not corrected 2000 VA Fluorescent lamp load (electronic ballast) 1200 W Energy saving lamps 300 W LED lamp < 2 W 55 W LED lamp 2-8 W 600 W LED lamp > 8 W 600 W Inrush current max. 800 A / 200 µs Voltage output 240 V AC Switching output Potential-free Switching of various phases Possible Suitable for SELV Yes if all channels switch at SELV C load − Type Base module Ambient temperature -5°C ... 45°C Type of protection IP 20 Protection class II according to EN 60 669 22/11/2024 Page 1 of 2
Item no.: 4930200 Subject to technical changes and misprints additional information at: www.theben.de/product/4930200 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. Connection example Scale drawings 22/11/2024 Page 2 of 2