4910273 THEBEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Item no.: 4910273 Subject to technical changes and misprints additional information at: www.theben.de/product/4910273 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. KNX Actuators DIN rail and gateways
Description
- 2-way 1-10 V control unit MIX - Base module MIX - Can be upgraded to maximum of 6 channels - Free combination of switches, dimming, blinds and heating control as well as binary inputs - Switching and dimming of lighting circuits in combination with electronic ballasts (EBs and ballasts LED) - 1-10V inputs and one switch output (relay contact) per channel - LED switching status display for each channel - Manual switch with On/Off/Bus settings (also without bus voltage) - With crossover switching to spare the relay contact Technical data SMG 2 S KNX Operating voltage KNX Bus voltage, ≤10 mA Operating voltage 230 V AC, 50 Hz Frequency 50 Hz Stand-by consumption 1.6 W Capacity loss max. 2.4 W Width 4 modules Installation type DIN rail Type of connection Terminal screws | Bus connection: KNX bus terminal Max. cable cross section Solid wire: 0.5 mm² (Ø 0.8) to 6 mm² | Stranded wire with end sleeve: 0.5 mm² to 4 mm² Number of channels 2 Type of contact NO contact, 16 A, 10 A Opening width < 3 mm Switching output Potential-free SMG 2 S KNX Voltage output 230 V AC Frequency output 50 Hz Inrush current 400 A (150 µs), 200 A (600 µs) Resistive load 3680 W Incandescent/halogen lamp load 2500 W Capacitive load 140 µF Voltage input 1 - 10 V Signal current input max. 100 mA Signal duration Continuous Max. cable length 500 m Ambient temperature -5°C ... 45°C Type of protection IP 20 Protection class II according to EN 60 730-1 22/11/2024 Page 1 of 2
Item no.: 4910273 Subject to technical changes and misprints additional information at: www.theben.de/product/4910273 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. Connection example Scale drawings 22/11/2024 Page 2 of 2