48DC12-150 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

Features

The 48DC12-150 supports 48V Lithium-Ion upgrades in a 12V infrastructure. Other combinations of voltages are also available.

  • Optional LCD remote display
  • Thermally controlled cooling fan
  • Provides automatic electronic short circuit/overload protection, and automatic over-temperature shutdown
  • 48VDC input provided with a pre-attached pluggable connector with 4ft cable (other options available)
  • Local status LED provides converter troubleshooting information at a glance
  • Low battery protection automatically shuts down converter at 39.0 VDC with inrush delay
  • High surge rating for large motor loads
  • Rugged design for RV/Mobile environments
  • Wide operating temperature range
  • Provides parallel and/or redundant operation for up to three units
  • Other voltage and current ratings available, contact factory for more information SPECIFICATIONS Input battery voltage range 39.0- 50.0 VDC, 44VDC Nominal Surge voltage Up to 60 VDC Maximum output voltage 14.4 VDC Nominal output voltage 12.6 VDC Idle current (typical) 900 mADC Continuous output power 1800 Watts @ 25°C Output current (nominal) 150 ADC Input current Up to 50 ADC Peak power (typical) 3100 Watts Peak output current (typical) 300 ADC Efficiency 90% at 50% of rated load Operating temperature -20° C to +65° C (-4° F to 149° F) Input connector Anderson Power SB®50 992G4 (colored blue) Weight 42 lb (19.1 kg) Limited warranty Three years Page 1 www.sensata.com CONTACT US Americas 425-353-8833 magnumsales@sensata.com International MagnumInternationalSales@ sensata.com Copyright © 2017 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. The World Depends on Sensors and Controls MAGNUM-DIMENSIONS

2211 West Casino Road

Everett, Washington 98204 USA 425-353-8833

4467 White Bear Pkwy

St. Paul, MN 55110 USA 855-633-7257 www.magnum-dimensions.com The 48DC12-150 supports 48V Lithium-Ion upgrades in a 12V infrastructure. Other combinations of voltages are also available. 48DC12-150 DC TO DC CONVERTER The 48DC12-150 Features: Optional LCD remote display Thermally controlled cooling fan Provides automatic electronic short circuit/overload protection, and Testing for specifications at 25° C., and 44Vdc measured at the converter input terminals. Specifications subject to change without notice. August 2015 Rev 10 Part #131418 48DC12-150CONVERTER SPECIFICATIONS Input battery voltage range Surge voltage Maximum output voltage Nominal output voltage Idle current (typical) Continuous output power Output current (nominal) Input current Peak power (typical) Peak output current (typical) Efficiency Operating temperature Input connector Dimensions (l x w x h) Weight Limited warranty 39.0- 50.0 VDC, 44VDC Nominal Up to 60 VDC

14.4 VDC

12.6 VDC

1800 Watts @ 25°C

150 ADC

3100 Watts

300 ADC

90% at 50% of rated load Anderson Power SB®50 992G4 (colored blue) 42 lb (19.1 kg) Three years Local status LED provides converter troubleshooting information at a glance Low battery protection automatically shuts down converter at 39.0 VDC with inrush delay operation for up to three units Wide operating temperature range Provides parallel and/or redundant automatic over-temperature shutdown 48VDC input provided with a pre-attached pluggable connector with 4ft cable (other options available) Other voltage and current ratings available, contact factory for more informationHigh surge rating for large motor loads Rugged design for RV/Mobile environments