481RV12172100

481RV12172100 WURTH | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

DESCRIPTION

GENERAL TOLERANCE Basic materialProjection Drawing.- No. WS-RPTL 20x20 Rotary/Push button switch with Integrated LED, THT Type

481 RV121 72100

1,5:1 System :Solid Edge ST4 WE eiCan CAD Würth Elektronik eiCan .x = +/- 0,2 .xx = +/- 0,15 SIZE This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. 13-10-02 Hsu 15-01-20shorting, non-shorting LED Terminal: Brass with Tina DaF RECOMMENDED LAYOUT TECHNICAL CHARACTERISTICS Specification Rotary switch/Push button switch >Rating :100mA, 30VDC >Contact Resistance : Initial Rotary : 200mOhm max. Initial Push button : 50mOhm max. After Life Test Rotary : 1OHM max. After Life Test Push button : 200mOhm max. >Insulation Resistance : min. 100MΩ at 500VDC for 1 minute >Dielectric Strength : 500VAC for 1 minute Switch function Rotary switch switching degree : 45+/-2̊ Switch schematic : 1P8T Push button Function : momentary Pre- Travel :0.7±0.3mm Total-Travel : 1.8±0.3mm Bounce: 10ms max. Material >Cover : Stainless steel >LED cover/Diffuser plate : PC UL HB >Knob: PA66 UL HB >Frame : PA66 UL HB >Base : PA66 UL HB >Stationary Board : PA66 UL HB >Stationary Contact : Brass with Silver >Moving Contact Push button : Bronze with Silver >Moving Contact Rotary : Copper alloy with Silver >Terminal : Brass with Silver >LED Terminal : Brass with Tin >Spring/Roller ball : Stainless Steel Soldering Information >Terminal in THT version > Wave soldering 260°C 10sec. max >Hand soldering under 350°C for 3sec. max Environmental Storage condition : -40°C ~ +85°C ,60% RH max. Operation condition : -40°C ~ +85°C Compliance : ROHS ,Reach Handling advise > ESD prevention methods need to be applicant for manual handling and processing by machinery > Resistors for protection are mandatory Packaging information >ESD tray Scale - 1,5:1 20,4 19,75 14,453,5 0,6 4,9 2,0 6,5 19,3 5,0 10,0 7,8 5,0 (1) (2) (3) (4) (5) (6) L1 L2 C C L1 L2 C 1 C START CIRCUIT DIAGRAM LED SCHEMATIC 6 7 CC (1) (2)(3) (4)(5)(6) ø 1,7ø 2x 0,7 ø 16x 0,9 Part number Force Color of LED Life cycle Rotary Life cycle Push button 481 RV 121 72100 250gf ± 100gf Red/Bright green 20.000 50.000 O 1,55x 13,0 14,2O 0,2 x0,5 13,0 0,2 x0,4 0,6 (16x) x0,3 (shorting) (non-shorting)

GENERAL TOLERANCE Basic materialProjection Drawing.- No. WS-RPTL 20x20 Rotary/Push button switch with Integrated LED, THT Type 1,5:1 System :Solid Edge ST4 WE eiCan CAD Würth Elektronik eiCan .x = +/- 0,2 .xx = +/- 0,15 SIZE This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. 13-10-02 Hsu 15-01-20shorting, non-shorting LED Terminal: Brass with Tina DaF Red bright green RS VS unit 1 Peak wavelength typ. nm 650 574 Dominant Wave length @IF=20mA spectral Line Half-width @IF=20mA Capacitance VF=0V;f=1MHZ Forward voltage typ. V 1,95 2,1 @IF=20mA max.V 2,5 2,5 Reverse current @VR=5V

7 ESD V 2000 2000

8 Viewing Angle

@20mA 2θ 50% typ Luminous intensity min. mcd 120 20 @IF=20mA typ. mcd 220 50

10 Material AIGaInP AIGaInP

11 lens type water clear water clear Absolute Maximun Ratings (Ambient Temperature 25C ) Properties Red bright green Unit Power Dissipation 75 75 mW Peak Forward current 185 150 mA continuous Forward current 30 30 mA Reverse voltage 5 5 V ESD Threshold / HBM 2000 2000 V item Emitting color Order code 2 typ.nm 630 567 4 typ.pF 35 15 3 typ.nm 28 20 6 uA 10 10 º 145 145 HANDLING ADVISE 1) The solder profile has to be complied with according to the technical reflow /or wave soldering specification, otherwise no warranty will be sustained 2) All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not 100% solderability can't be warranted 3) Violation of the technical product specifications such as exceeding the absolute maximum ratings will be result in the loss of warranty 4) It's also recommended to return the products into the original packaging 5) ESD prevention methods need to be applicated for manual handling and processing by machinery 6) Resistors for protection are obligatory 7) The standard deliveries include values in the range and limitation as defined in the Electrical & Optical Properties specified in the datasheet. On each reel, only one bin is sorted and taped. The bin is defined on intensity, chromaticity coordinate or wavelength and forward voltage.In order to ensure highest availability, the reel binning of standard deliveries can vary. A single bin cannot be ordered.Please contact us in advance, if you need a particular bin sorting before placing your order to clarify the lead time, MOQ and pricing.