47LYV

47LYV MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

MODEL: 47LYV 47LYV SPECIFICATIONS ES-9514 Rev.9 Page 1/5 https://www.m-system.co.jp/ Digital Panel Meters 47 Series DC INPUT DIGITAL PANEL METER (4 1/2 digit, process meter, LED display type) Functions & Features

• 4 ½ digit DC input digital panel meter
• 1/8 DIN size
• Moving average function to suppress the display flickering
• Scaling, forced zero, low-end cutout
• Max. and Min. value display
• Safety terminal cover tethered to the device with a strap
• IP66 front panel
• Separable terminal block " MB SN 4 DBMF .BY . JO

4 IJGU

;SP 4QO %1 5DI 'OD .JO .BY - - NN JODI MODEL: 47LYV-[1][2]-[3][4]

ORDERING INFORMATION

• Code number: 47LYV-[1][2]-[3][4] Specify a code from below for each of [1] through [4]. (e.g. 47LYV-AR-M2/Q)
• Specify the specification for option code /Q (e.g. /C01/S01/SET) [1] INPUT Current A: 4 – 20 mA DC (Input resistance approx. 10 Ω) D: 0 – 20 mA DC (Input resistance approx. 10 Ω) Voltage 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) [2] DISPLAY COLOR R: Red YR: Orange [3] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 50/60 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) P: 110 V DC (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) Moving parts and indicators are not coated. /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-9514) GENERAL SPECIFICATIONS Construction: Panel flush mounting Degree of protection: IP66; applicable to the front of the panel meter mounted according to the specified panel cutout Connection: M3 separable screw terminal (torque 0.6 N·m) Screw terminal: Nickel-plated steel (standard) or stainless steel Housing material: Flame-resistant resin (gray) Isolation: Input to power Setting: (Front button)
• Scaled range
• Moving average
• Others (Refer to the instruction manual for details) Read rate: 40 times/sec. (25 msec.) Averaging: None or moving average Lockout setting: Prohibiting certain operations; protecting settings DISPLAY Display: 16 mm (.63) high, 4 ½ digits, 7-segment LED Display range: -19999 to 19999 Decimal point position: 10–1, 10–2, 10–3, 10–4 or none Zero indication: Higher-digit zeros are suppressed. Over-range indication: ‘-19999’ or ‘19999’ blinking for display values out of the display range. ‘S.ERR’ and ‘Min’ or ‘Max’ blinking when the input signal is

MODEL: 47LYV 47LYV SPECIFICATIONS ES-9514 Rev.9 Page 2/5 https://www.m-system.co.jp/ out of the usable range. Function indicators: Zro, Spn, D/P, Tch, Fnc, Min, Max Display mode status and operation status, amber ON or blink Engineering unit indication: Sticker label attached DC, AC, mV, V, kV, μA, mA, A, kA, mW, W, kW, var, kvar, Mvar, VA, Hz, Ω, kΩ, MΩ, cm, mm, m, m/sec, mm/min, cm/min, m/min, m/h, m/s2, inch, ℓ, ℓ/s, ℓ/min, ℓ/h, m3, m3/sec, m3/min, m3/h, Nm3/h, N·m, N/m2, g, kg, kg/h, N, kN, Pa, kPa, MPa, t, t/h, ℃, °F, %RH, J, kJ, MJ, rpm, sec, min, min-1, pH, %, ppm, etc. INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated Measurable range: -10 – +110 % ■ DC Voltage Measurable range: -10 – +110 % INSTALLATION Power consumption

• AC: Approx. 4 VA
• DC: Approx. 2 W Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Panel flush mounting Weight: 250 g (0.55 lb) PERFORMANCE Accuracy: ±0.1 % ±1 digit Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Input resolution: 16 bits Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @ 1 minute (input to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Installation Category II Pollution Degree 2 Input to power: Reinforced insulation (300 V) RoHS Directive Protection against access to the terminal blocks: Finger protection (VDE 0660-514)

MODEL: 47LYV 47LYV SPECIFICATIONS ES-9514 Rev.9 Page 3/5 https://www.m-system.co.jp/ EXTERNAL VIEW (3) Max/Min Button (4) Alarm/ Button (5) Scale/ Button (6) Shift Button (7) Up Button (1) Main Display (2) Function Indicators Alarm/ Scale/ Max/Min Shift Up Zro Spn D/P Tch Fnc Min Max

• COMPONENT IDENTIFICATION No. COMPONENT FUNCTION (1) Main display Indicates present values, setting values and status of the unit. (2) Function indicators Indicate setting modes and status. (3) Max/Min button Used to switch the main display to show present values, maximum values or minimum values. (4) Alarm/ button Used to shift through setting items in each setting mode. (5) Scale/ button Used to move on to the scaling and other setting modes; or to shift through setting items in each setting mode. (6) Shift button Used to move on to the setting standby status and shift through display digits in each setting mode. (7) Up button Used to execute/cancel Forced Zero, or to choose setting value in each setting mode. Note: Refer to the operating manual for details on each function.

MODEL: 47LYV 47LYV SPECIFICATIONS ES-9514 Rev.9 Page 4/5 https://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 96 (3.78) 48 (1.89) 103 (4.06) 95 (3.74) 2 (.08) 47 (1.85) 98.5 (3.88) 45 (1.77) 91.5 (3.60) ■ REAR VIEW ■ FRONT VIEW ■ SIDE VIEW ■ TOP VIEW 1 2 3 4 5 6 7 8 9 10 2–M3 SCREW 10–M3 SCREW TERMINAL 6.6 (.26)

MODEL: 47LYV 47LYV SPECIFICATIONS ES-9514 Rev.9 Page 5/5 https://www.m-system.co.jp/ MOUNTING REQUIREMENTS unit: mm + 0.8 – 0 + 0.6 – 0 min. 120 min. 75 Panel thickness: 1.6 to 8.0 mm SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM 1 6 POWER U(+) V(–) Digital Computation Display / Setting A/D Converter 10Ω * Shunt resistor incoporated for current input. INPUT Specifications are subject to change without notice.